linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alex Gonzalez <alex.gonzalez@digi.com>
To: <shawnguo@kernel.org>
Cc: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<s.hauer@pengutronix.de>, <kernel@pengutronix.de>,
	<fabio.estevam@nxp.com>, <linux-imx@nxp.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <alex.gonzalez@digi.com>
Subject: [PATCH] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant
Date: Fri, 19 Oct 2018 17:15:41 +0200	[thread overview]
Message-ID: <1539962141-32418-2-git-send-email-alex.gonzalez@digi.com> (raw)
In-Reply-To: <1539962141-32418-1-git-send-email-alex.gonzalez@digi.com>

The wireless variants of the ConnecCore 6UL SOM include a Qualcomm
QCA6564 wireless chip with dual WiFi and Bluetooth.

Both the ConnectCore 6UL SBC Express and Pro boards fit a wireless SOM.

The Wifi is connected through the SDIO interface on usdhc1 and the
Bluetooth is connected via uart1.

Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
 arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 65 +++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
index c71a84da1af0..f465e2d97832 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
@@ -161,6 +161,26 @@
 	};
 };
 
+/* UART1 (Bluetooth) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 (Wireless) */
+&usdhc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
+	non-removable;
+	no-1-8-v;
+	bus-width = <4>;
+	status = "okay";
+};
+
+
 &iomuxc {
 	pinctrl_gpmi_nand: gpmigrp {
 		fsl,pins = <
@@ -188,6 +208,51 @@
 			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
 			>;
 		};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX   0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX   0x1b0b1
+			MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS    0x1b0b1
+			MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS    0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x17051
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
+			 >;
+		};
+
+	pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__GPIO2_IO16           0x3000
+			MX6UL_PAD_SD1_CLK__GPIO2_IO17           0x3000
+			MX6UL_PAD_SD1_DATA0__GPIO2_IO18         0x3000
+			MX6UL_PAD_SD1_DATA1__GPIO2_IO19         0x3000
+			MX6UL_PAD_SD1_DATA2__GPIO2_IO20         0x3000
+			MX6UL_PAD_SD1_DATA3__GPIO2_IO21         0x3000
+			 >;
+	};
+
+	pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x08a0
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x08a0
+			  >;
+	};
+
+	pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x3000
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x3000
+			 >;
+	};
 };
 
 &reg_arm {

  reply	other threads:[~2018-10-19 15:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-19 15:15 [PATCH] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant Alex Gonzalez
2018-10-19 15:15 ` Alex Gonzalez [this message]
2018-10-19 16:26   ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539962141-32418-2-git-send-email-alex.gonzalez@digi.com \
    --to=alex.gonzalez@digi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).