[PATCH v2 00/11] thermal: add new flag irq-mode for trip point

[Lukasz Luba <l.luba@partner.samsung.com>]

Hi all,

This patch set adds a new flag and mechanism in thermal trip points in
DT.  The old implementation in thermal zone in DT sets the same
configuration for all internal trip points. It does not work for all
HW.  There are SoCs which support IRQs for some trip points (i.e.
Exynos 4 has 4 trip points with IRQs). For additional one defined
inside the thermal zone there is a need of 'polling'. When developer
adds polling mode settings inside the thermal zone, all the trip
points will be registered for polling, even those supporting IRQs,
which does not make sense. Thus, developers create workarounds, which
are confusing for some other developers.  To workaround, 
people declare some trip points as 'active' (those with IRQ support).
It allows to bypass polling mode in thermal framework applied for 
all thermal zone's trip points.

Thermal framework defines 4 types of trip points. The 'passive' means
passive cooling using DVFS, 'active' is designed for fan and other
devices actively changing the outside conditions. Therefore, a workaround
mentioned earlier is confusing when someone does not know about the
framework limitations.

This patch set tries to solve the issue by adding one flag inside the
trip point: 'irq-mode;'.  The trip point 'passive' declared in DT with
explicit flag 'irq-mode;' will not register itself as polling mode.
Thermal framework will skip it during scheduling next read out work.
The old global-polling-mode-configuration-inside-thermal-zone is still
valid.  Patch set does not break existing design for trip points which
do not have 'irq-mode' flag - they will use polling.

As an example please check patch #10 for Exynos4 SoC family, where there
is 4 HW supported trip points and there is a need of 6. The rest 2 are
declared as 'passive' without 'irq-mode;' flag, which means polling
mode needed for them.

Patch #1 is a small cleanup in thermal framework.

Change log:
v2
- changed description in cover letter
- change commit messages according to Krzysztof comments
- rebase on top of current mainline (v4.20-rc1)

Regards,
Lukasz Luba

Lukasz Luba (11):
  thermal: remove unused function parameter
  thermal: add irq-mode configuration for trip point
  thermal: add new sysfs file for irq-mode
  Doc: thermal: new irq-mode for trip point
  Doc: DT: thermal: new irq-mode for trip point
  arm64: dts: exynos5433: add support for thermal trip irq-mode
  arm64: dts: exynos7: add support for thermal trip irq-mode
  arm: dts: exynos4: add support for thermal trip irq-mode
  arm: dts: exynos5420: add support for thermal trip irq-mode
  arm: dts: exynos5422: add support for thermal trip irq-mode
  arm: dts: exynos5410: add support for thermal trip irq-mode

 .../devicetree/bindings/thermal/thermal.txt        |   7 ++
 Documentation/thermal/sysfs-api.txt                |   9 ++
 arch/arm/boot/dts/exynos4-cpu-thermal.dtsi         |  10 +-
 arch/arm/boot/dts/exynos5410-odroidxu.dts          |  10 +-
 arch/arm/boot/dts/exynos5420-trip-points.dtsi      |  10 +-
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |  40 +++++---
 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 105 ++++++++++++++-------
 .../arm64/boot/dts/exynos/exynos7-trip-points.dtsi |   8 ++
 drivers/thermal/of-thermal.c                       |  17 ++++
 drivers/thermal/thermal_core.c                     |  16 ++--
 drivers/thermal/thermal_sysfs.c                    |  53 ++++++++++-
 include/linux/thermal.h                            |   5 +
 12 files changed, 226 insertions(+), 64 deletions(-)

-- 
2.7.4