From: Lukasz Luba <l.luba@partner.samsung.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org
Cc: rui.zhang@intel.com, edubezval@gmail.com,
daniel.lezcano@linaro.org, robh+dt@kernel.org,
mark.rutland@arm.com, corbet@lwn.net, b.zolnierkie@samsung.com,
krzk@kernel.org, Lukasz Luba <l.luba@partner.samsung.com>,
Kukjin Kim <kgene@kernel.org>,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH v2 06/11] arm64: dts: exynos5433: add support for thermal trip irq-mode
Date: Wed, 7 Nov 2018 18:09:48 +0100 [thread overview]
Message-ID: <1541610593-28542-7-git-send-email-l.luba@partner.samsung.com> (raw)
In-Reply-To: <1541610593-28542-1-git-send-email-l.luba@partner.samsung.com>
This patch adds support for new flag which indicates
that trip point triggers IRQ when temperature is met.
Exynos5433 supports 8 trip point which will trigger IRQ.
Above that number other trip points should be registered
without 'irq-mode' flag.
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 105 ++++++++++++++++---------
1 file changed, 70 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
index fe3a0b1..c4330f6 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -17,37 +17,44 @@ thermal-zones {
atlas0_alert_0: atlas0-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas0_alert_1: atlas0-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas0_alert_2: atlas0-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas0_alert_3: atlas0-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas0_alert_4: atlas0-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas0_alert_5: atlas0-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas0_alert_6: atlas0-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
};
@@ -98,37 +105,44 @@ thermal-zones {
atlas1_alert_0: atlas1-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas1_alert_1: atlas1-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas1_alert_2: atlas1-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas1_alert_3: atlas1-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas1_alert_4: atlas1-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas1_alert_5: atlas1-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
atlas1_alert_6: atlas1-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
};
};
@@ -141,37 +155,44 @@ thermal-zones {
g3d_alert_0: g3d-alert-0 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
g3d_alert_1: g3d-alert-1 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
g3d_alert_2: g3d-alert-2 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
g3d_alert_3: g3d-alert-3 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
g3d_alert_4: g3d-alert-4 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
g3d_alert_5: g3d-alert-5 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
g3d_alert_6: g3d-alert-6 {
temperature = <100000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
};
};
@@ -184,37 +205,44 @@ thermal-zones {
apollo_alert_0: apollo-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
apollo_alert_1: apollo-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
apollo_alert_2: apollo-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
apollo_alert_3: apollo-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
apollo_alert_4: apollo-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
apollo_alert_5: apollo-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
apollo_alert_6: apollo-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
};
@@ -255,37 +283,44 @@ thermal-zones {
isp_alert_0: isp-alert-0 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
isp_alert_1: isp-alert-1 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
isp_alert_2: isp-alert-2 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
isp_alert_3: isp-alert-3 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
isp_alert_4: isp-alert-4 {
temperature = <100000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
isp_alert_5: isp-alert-5 {
temperature = <105000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
isp_alert_6: isp-alert-6 {
temperature = <110000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
};
};
--
2.7.4
next prev parent reply other threads:[~2018-11-07 17:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20181107171019eucas1p1fcb1f44e00265434548d901479f2ea94@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 00/11] thermal: add new flag irq-mode for trip point Lukasz Luba
[not found] ` <CGME20181107171022eucas1p1c2431f0561d9b1357ab569ab77deca34@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 01/11] thermal: remove unused function parameter Lukasz Luba
[not found] ` <CGME20181107171036eucas1p13253d56b463c8f888ab8f8e418635297@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 02/11] thermal: add irq-mode configuration for trip point Lukasz Luba
2018-12-05 15:09 ` Zhang Rui
2018-12-06 19:18 ` Lukasz Luba
2018-12-06 19:55 ` Lukasz Luba
2019-01-10 14:20 ` Zhang Rui
[not found] ` <CGME20181107171037eucas1p1b475d186830d4401b50fcd2c16781f92@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 03/11] thermal: add new sysfs file for irq-mode Lukasz Luba
[not found] ` <CGME20181107171038eucas1p1eb5dce12a1f5f7a3587f82f8396fa075@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 04/11] Doc: thermal: new irq-mode for trip point Lukasz Luba
[not found] ` <CGME20181107171039eucas1p2227bd4bc573fd0d2a3a97986004be16b@eucas1p2.samsung.com>
2018-11-07 17:09 ` [PATCH v2 05/11] Doc: DT: " Lukasz Luba
2018-11-12 8:51 ` Krzysztof Kozlowski
2018-11-13 10:06 ` Lukasz Luba
[not found] ` <5bea0ecd.1c69fb81.d5613.1c9e@mx.google.com>
2018-11-13 10:13 ` Lukasz Luba
[not found] ` <CGME20181107171041eucas1p1a3cf91435b9071fd6e6f84101ebbcd9f@eucas1p1.samsung.com>
2018-11-07 17:09 ` Lukasz Luba [this message]
2018-11-12 9:00 ` [PATCH v2 06/11] arm64: dts: exynos5433: add support for thermal trip irq-mode Krzysztof Kozlowski
2018-11-13 10:10 ` Lukasz Luba
[not found] ` <CGME20181107171042eucas1p1675eb589f3951e516461a0a775ee87da@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 07/11] arm64: dts: exynos7: " Lukasz Luba
[not found] ` <CGME20181107171043eucas1p16be3fa901c7bceb129c70fc81dba6e48@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 08/11] arm: dts: exynos4: " Lukasz Luba
[not found] ` <CGME20181107171044eucas1p198434e21cf21ee754302615a6a8f3c20@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 09/11] arm: dts: exynos5420: " Lukasz Luba
[not found] ` <CGME20181107171045eucas1p26ec5feb1b2a397971c919592f6d87b40@eucas1p2.samsung.com>
2018-11-07 17:09 ` [PATCH v2 10/11] arm: dts: exynos5422: " Lukasz Luba
[not found] ` <CGME20181107171046eucas1p1649bcf14a88ef9dd183724dde3a98f8c@eucas1p1.samsung.com>
2018-11-07 17:09 ` [PATCH v2 11/11] arm: dts: exynos5410: " Lukasz Luba
2018-12-05 15:08 ` [PATCH v2 00/11] thermal: add new flag irq-mode for trip point Zhang Rui
2018-12-05 15:33 ` Lukasz Luba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541610593-28542-7-git-send-email-l.luba@partner.samsung.com \
--to=l.luba@partner.samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--subject='Re: [PATCH v2 06/11] arm64: dts: exynos5433: add support for thermal trip irq-mode' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).