[LINUX PATCH v12 1/3] dt-bindings: mtd: arasan: Add device tree binding documentation

[Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>]

This patch adds the dts binding document for arasan nand flash controller

Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
---
Changes in v12:
 - Removed interrupt-parent description as it is implied as suggested by
   Rob Herring
 - Added missing ';' as required
Changes in v11:
 - Updated compatible description as suggested by Boris
 - Removed arasan-has-dma property
Changes in v10:
 - None
Changes in v9:
 - None
Changes in v8:
 - Updated compatible and clock-names as per Boris comments
Changes in v7:
 - Corrected the acronyms those should be in caps
Changes in v6:
 - Removed num-cs property
 - Separated nandchip from nand controller
Changes in v5:
 - None
Changes in v4:
 - Added num-cs property
 - Added clock support
Changes in v3:
 - None
Changes in v2:
 - None
---
 .../devicetree/bindings/mtd/arasan_nand.txt        | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/arasan_nand.txt

diff --git a/Documentation/devicetree/bindings/mtd/arasan_nand.txt b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
new file mode 100644
index 0000000..b522daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arasan_nand.txt
@@ -0,0 +1,32 @@
+Arasan NAND Flash Controller with ONFI 3.1 support
+
+Required properties:
+- compatible:		Should be "xlnx,zynqmp-nand", "arasan,nfc-v3p10"
+- reg:			Memory map for module access
+- interrupts:		Should contain the interrupt for the device
+- clock-name:		List of input clocks - "sys", "flash"
+			(See clock bindings for details)
+- clocks:		Clock phandles (see clock bindings for details)
+
+Required properties for child node:
+- nand-ecc-mode: see nand.txt
+
+For NAND partition information please refer the below file
+Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+	nfc: nand@ff100000 {
+		compatible = "xlnx,zynqmp-nand", "arasan,nfc-v3p10";
+		reg = <0x0 0xff100000 0x1000>;
+		clock-name = "sys", "flash";
+		clocks = <&misc_clk &misc_clk>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 14 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			nand-ecc-mode = "hw";
+		};
+	};
-- 
2.7.4