[PATCH v1 1/3] arm64: dts: mt7622: fix no more console output on rfb1

[PATCH v1 1/3] arm64: dts: mt7622: fix no more console output on rfb1

[Ryder Lee]

The issue was found by Kernel CI:
https://kernelci.org/boot/id/5bbdcbad59b5146fc5b43592/

Fix this by using a 'stdout-path' property that points to the device.

Fixes: c0d9f9ad4f76 ("arm64: dts: mt7622: add earlycon to mt7622-rfb1 board")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
---
Changes since v1: revise commit msg
---
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index dcad086..3f78334 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -17,8 +17,13 @@
 	model = "MediaTek MT7622 RFB1 board";
 	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
 	};
 
 	cpus {
-- 
1.9.1

[PATCH v1 2/3] arm64: dts: mt7622: fix no more console output on BPI-R64 board

[Ryder Lee]

Fix this by using a 'stdout-path' property that points to the device.

Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
Changes since v1: revise commit msg
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 5d6005c..710c5c3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -16,8 +16,13 @@
 	model = "Bananapi BPI-R64";
 	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
 	};
 
 	cpus {
-- 
1.9.1

[PATCH v1 3/3] arm64: dts: mt7622: Drop the general purpose timer node

[Ryder Lee]

The crash http://termbin.com/zitb is caused by the timer register
into system in early pahse during kernel boot, but the clock
sources didn't get ready at that time.

A better way is to switch to use CLK_OF_DECLARE() in driver for things
that need them early, but this node is actually useless in MT7622.
So we drop it.

Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index fe0c875..14a1028 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -227,16 +227,6 @@
 		#reset-cells = <1>;
 	};
 
-	timer: timer@10004000 {
-		compatible = "mediatek,mt7622-timer",
-			     "mediatek,mt6577-timer";
-		reg = <0 0x10004000 0 0x80>;
-		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
-			 <&topckgen CLK_TOP_RTC>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
 	scpsys: scpsys@10006000 {
 		compatible = "mediatek,mt7622-scpsys",
 			     "syscon";
-- 
1.9.1

Re: [PATCH v1 3/3] arm64: dts: mt7622: Drop the general purpose timer node

[Sasha Levin]

On Mon, Nov 12, 2018 at 09:28:08AM +0800, Ryder Lee wrote:
>The crash http://termbin.com/zitb is caused by the timer register
>into system in early pahse during kernel boot, but the clock
>sources didn't get ready at that time.
>
>A better way is to switch to use CLK_OF_DECLARE() in driver for things
>that need them early, but this node is actually useless in MT7622.
>So we drop it.
>
>Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes")
>Cc: stable@vger.kernel.org
>Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>

To confirm: the patch this fixes was added in v4.20-rc1, which means
that this current patch doesn't apply to any of the stable trees.

Did we miss something?

--
Thanks,
Sasha

Re: [PATCH v1 3/3] arm64: dts: mt7622: Drop the general purpose timer node

[Ryder Lee]

On Sun, 2018-11-11 at 21:45 -0500, Sasha Levin wrote:
> On Mon, Nov 12, 2018 at 09:28:08AM +0800, Ryder Lee wrote:
> >The crash http://termbin.com/zitb is caused by the timer register
> >into system in early pahse during kernel boot, but the clock
> >sources didn't get ready at that time.
> >
> >A better way is to switch to use CLK_OF_DECLARE() in driver for things
> >that need them early, but this node is actually useless in MT7622.
> >So we drop it.
> >
> >Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes")
> >Cc: stable@vger.kernel.org
> >Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> 
> To confirm: the patch this fixes was added in v4.20-rc1, which means
> that this current patch doesn't apply to any of the stable trees.
> 
> Did we miss something?
> 

I didn't see any fixup for this?

Ryder

Re: [PATCH v1 3/3] arm64: dts: mt7622: Drop the general purpose timer node

[Ryder Lee]

On Mon, 2018-11-12 at 11:33 +0800, Ryder Lee wrote:
> On Sun, 2018-11-11 at 21:45 -0500, Sasha Levin wrote:
> > On Mon, Nov 12, 2018 at 09:28:08AM +0800, Ryder Lee wrote:
> > >The crash http://termbin.com/zitb is caused by the timer register
> > >into system in early pahse during kernel boot, but the clock
> > >sources didn't get ready at that time.
> > >
> > >A better way is to switch to use CLK_OF_DECLARE() in driver for things
> > >that need them early, but this node is actually useless in MT7622.
> > >So we drop it.
> > >
> > >Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes")
> > >Cc: stable@vger.kernel.org
> > >Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> > 
> > To confirm: the patch this fixes was added in v4.20-rc1, which means
> > that this current patch doesn't apply to any of the stable trees.
> > 
> > Did we miss something?
> > 
> 
> I didn't see any fixup for this?
> 
> Ryder

Oh, I didn't get it right. Yes, there is no need to apply to the stable
trees.

@Matthias, could you help to drop the CC tag when you take this patch
through your tree?

Sorry for the inconvenience.

Thanks
Ryder

Re: [PATCH v1 3/3] arm64: dts: mt7622: Drop the general purpose timer node

[Matthias Brugger]

On 12/11/2018 02:28, Ryder Lee wrote:
> The crash http://termbin.com/zitb is caused by the timer register
> into system in early pahse during kernel boot, but the clock
> sources didn't get ready at that time.
> 
> A better way is to switch to use CLK_OF_DECLARE() in driver for things
> that need them early, but this node is actually useless in MT7622.
> So we drop it.

I suppose the root cause is, that the driver doesn't check the error
timer_of_init returned.

Would you mind to test the following patch to see if this fixes the problem?

--->8
From be91e56ed527261137335af340845eb3dd3dd33a Mon Sep 17 00:00:00 2001
From: Matthias Brugger <matthias.bgg@gmail.com>
Date: Fri, 23 Nov 2018 17:04:08 +0100
Subject: [PATCH] clocksource/drivers/timer-mediatek: error out on probe defer

If the clocks are not yet present, because they are loaded after
the timer is initialized, we are unable to boot.
Check if the return value of timer_of_init and return on EPROBE_DEFER.

Error seen is:
[    0.008337] Failed to get clock for /timer@10004000
[    0.013435] WARNING: CPU: 0 PID: 0 at ../drivers/clk/clk.c:3615
__clk_put+0xf0/0x120
[    0.021453] Modules linked in:
[    0.024614] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.20.0-rc1-00063-g2859d9abd7e8 #2
[    0.032902] Hardware name: MediaTek MT7622 RFB1 board (DT)
[    0.038580] pstate: 20000085 (nzCv daIf -PAN -UAO)
[    0.043538] pc : __clk_put+0xf0/0x120
[    0.047328] lr : clk_put+0xc/0x18
[    0.050753] sp : ffff000009163ed0
[    0.054178] x29: ffff000009163ed0 x28: 0000000041010018
[    0.059676] x27: 0000000000000000 x26: 0000000000000000
[    0.065174] x25: ffff0000090cb008 x24: ffff80001dfd7800
[    0.070672] x23: ffff000008f934b8 x22: ffff80001dfdeae0
[    0.076169] x21: ffff80001dfdeae0 x20: fffffffffffffdfb
[    0.081668] x19: ffff00000929ac40 x18: ffffffffffffffff
[    0.087166] x17: 0000000000000000 x16: 0000000000000000
[    0.092664] x15: ffff0000091696c8 x14: ffff0000892cd70f
[    0.098162] x13: ffff0000092cd71d x12: ffff000009181348
[    0.103661] x11: ffff000009181000 x10: 0000000005f5e0ff
[    0.109159] x9 : 0000000000000040 x8 : ffff000009181400
[    0.114657] x7 : ffff80001c800270 x6 : 0000000000000000
[    0.120155] x5 : ffff80001c800248 x4 : 0000000000000000
[    0.125653] x3 : 0000000000000000 x2 : 0000000000000000
[    0.131151] x1 : 0000000000000000 x0 : fffffffffffffdfb
[    0.136649] Call trace:
[    0.139175]  __clk_put+0xf0/0x120
[    0.142605]  timer_of_cleanup+0x60/0x7c
[    0.146572]  mtk_gpt_init+0x18c/0x1a0
[    0.150359]  timer_probe+0x74/0x10c
[    0.153969]  time_init+0x14/0x44
[    0.157307]  start_kernel+0x29c/0x414
[    0.161098] ---[ end trace c3137b005300b618 ]---

Fixes: a0858f937960 ("clocksource/drivers/timer-mediatek: Convert the driver to
timer-of")
Fixes: e3af677607d9 ("clocksource/drivers/timer-mediatek: Add support for system
timer")
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/clocksource/timer-mediatek.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/timer-mediatek.c
b/drivers/clocksource/timer-mediatek.c
index eb10321f8517..d40c77a65b08 100644
--- a/drivers/clocksource/timer-mediatek.c
+++ b/drivers/clocksource/timer-mediatek.c
@@ -276,8 +276,12 @@ static int __init mtk_syst_init(struct device_node *node)
 	to.of_irq.handler = mtk_syst_handler;

 	ret = timer_of_init(node, &to);
-	if (ret)
+	if (ret) {
+		if (ret == -EPROBE_DEFER)
+			return ret;
+
 		goto err;
+	}

 	clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
 					TIMER_SYNC_TICKS, 0xffffffff);
@@ -301,8 +305,12 @@ static int __init mtk_gpt_init(struct device_node *node)
 	to.of_irq.handler = mtk_gpt_interrupt;

 	ret = timer_of_init(node, &to);
-	if (ret)
+	if (ret) {
+		if (ret == -EPROBE_DEFER)
+			return ret;
+
 		goto err;
+	}

 	/* Configure clock source */
 	mtk_gpt_setup(&to, TIMER_CLK_SRC, GPT_CTRL_OP_FREERUN);
-- 
2.19.1

Re: [PATCH v1 3/3] arm64: dts: mt7622: Drop the general purpose timer node

[Ryder Lee]

On Fri, 2018-11-23 at 18:07 +0100, Matthias Brugger wrote:
> 
> On 12/11/2018 02:28, Ryder Lee wrote:
> > The crash http://termbin.com/zitb is caused by the timer register
> > into system in early pahse during kernel boot, but the clock
> > sources didn't get ready at that time.
> > 
> > A better way is to switch to use CLK_OF_DECLARE() in driver for things
> > that need them early, but this node is actually useless in MT7622.
> > So we drop it.
> 
> I suppose the root cause is, that the driver doesn't check the error
> timer_of_init returned.
> 
> Would you mind to test the following patch to see if this fixes the problem?
> 
> --->8
> From be91e56ed527261137335af340845eb3dd3dd33a Mon Sep 17 00:00:00 2001
> From: Matthias Brugger <matthias.bgg@gmail.com>
> Date: Fri, 23 Nov 2018 17:04:08 +0100
> Subject: [PATCH] clocksource/drivers/timer-mediatek: error out on probe defer
> 
> If the clocks are not yet present, because they are loaded after
> the timer is initialized, we are unable to boot.
> Check if the return value of timer_of_init and return on EPROBE_DEFER.
> 
> Error seen is:
> [    0.008337] Failed to get clock for /timer@10004000
> [    0.013435] WARNING: CPU: 0 PID: 0 at ../drivers/clk/clk.c:3615
> __clk_put+0xf0/0x120
> [    0.021453] Modules linked in:
> [    0.024614] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
> 4.20.0-rc1-00063-g2859d9abd7e8 #2
> [    0.032902] Hardware name: MediaTek MT7622 RFB1 board (DT)
> [    0.038580] pstate: 20000085 (nzCv daIf -PAN -UAO)
> [    0.043538] pc : __clk_put+0xf0/0x120
> [    0.047328] lr : clk_put+0xc/0x18
> [    0.050753] sp : ffff000009163ed0
> [    0.054178] x29: ffff000009163ed0 x28: 0000000041010018
> [    0.059676] x27: 0000000000000000 x26: 0000000000000000
> [    0.065174] x25: ffff0000090cb008 x24: ffff80001dfd7800
> [    0.070672] x23: ffff000008f934b8 x22: ffff80001dfdeae0
> [    0.076169] x21: ffff80001dfdeae0 x20: fffffffffffffdfb
> [    0.081668] x19: ffff00000929ac40 x18: ffffffffffffffff
> [    0.087166] x17: 0000000000000000 x16: 0000000000000000
> [    0.092664] x15: ffff0000091696c8 x14: ffff0000892cd70f
> [    0.098162] x13: ffff0000092cd71d x12: ffff000009181348
> [    0.103661] x11: ffff000009181000 x10: 0000000005f5e0ff
> [    0.109159] x9 : 0000000000000040 x8 : ffff000009181400
> [    0.114657] x7 : ffff80001c800270 x6 : 0000000000000000
> [    0.120155] x5 : ffff80001c800248 x4 : 0000000000000000
> [    0.125653] x3 : 0000000000000000 x2 : 0000000000000000
> [    0.131151] x1 : 0000000000000000 x0 : fffffffffffffdfb
> [    0.136649] Call trace:
> [    0.139175]  __clk_put+0xf0/0x120
> [    0.142605]  timer_of_cleanup+0x60/0x7c
> [    0.146572]  mtk_gpt_init+0x18c/0x1a0
> [    0.150359]  timer_probe+0x74/0x10c
> [    0.153969]  time_init+0x14/0x44
> [    0.157307]  start_kernel+0x29c/0x414
> [    0.161098] ---[ end trace c3137b005300b618 ]---
> 
> Fixes: a0858f937960 ("clocksource/drivers/timer-mediatek: Convert the driver to
> timer-of")
> Fixes: e3af677607d9 ("clocksource/drivers/timer-mediatek: Add support for system
> timer")
> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
>  drivers/clocksource/timer-mediatek.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clocksource/timer-mediatek.c
> b/drivers/clocksource/timer-mediatek.c
> index eb10321f8517..d40c77a65b08 100644
> --- a/drivers/clocksource/timer-mediatek.c
> +++ b/drivers/clocksource/timer-mediatek.c
> @@ -276,8 +276,12 @@ static int __init mtk_syst_init(struct device_node *node)
>  	to.of_irq.handler = mtk_syst_handler;
> 
>  	ret = timer_of_init(node, &to);
> -	if (ret)
> +	if (ret) {
> +		if (ret == -EPROBE_DEFER)
> +			return ret;
> +
>  		goto err;
> +	}
> 
>  	clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
>  					TIMER_SYNC_TICKS, 0xffffffff);
> @@ -301,8 +305,12 @@ static int __init mtk_gpt_init(struct device_node *node)
>  	to.of_irq.handler = mtk_gpt_interrupt;
> 
>  	ret = timer_of_init(node, &to);
> -	if (ret)
> +	if (ret) {
> +		if (ret == -EPROBE_DEFER)
> +			return ret;
> +
>  		goto err;
> +	}
> 
>  	/* Configure clock source */
>  	mtk_gpt_setup(&to, TIMER_CLK_SRC, GPT_CTRL_OP_FREERUN);

I tried this patch, but it didn't work. I think *_OF_DECLARE() is not
compatible with EPROBE_DEFER.

I also found the similar discussion about this issue:
https://patchwork.kernel.org/patch/10580345/


Ryder

Re: [PATCH v1 3/3] arm64: dts: mt7622: Drop the general purpose timer node

[Matthias Brugger]

On 26/11/2018 04:49, Ryder Lee wrote:
> On Fri, 2018-11-23 at 18:07 +0100, Matthias Brugger wrote:
>>
>> On 12/11/2018 02:28, Ryder Lee wrote:
>>> The crash http://termbin.com/zitb is caused by the timer register
>>> into system in early pahse during kernel boot, but the clock
>>> sources didn't get ready at that time.
>>>
>>> A better way is to switch to use CLK_OF_DECLARE() in driver for things
>>> that need them early, but this node is actually useless in MT7622.
>>> So we drop it.
>>
>> I suppose the root cause is, that the driver doesn't check the error
>> timer_of_init returned.
>>
>> Would you mind to test the following patch to see if this fixes the problem?
>>
>> --->8
>> From be91e56ed527261137335af340845eb3dd3dd33a Mon Sep 17 00:00:00 2001
>> From: Matthias Brugger <matthias.bgg@gmail.com>
>> Date: Fri, 23 Nov 2018 17:04:08 +0100
>> Subject: [PATCH] clocksource/drivers/timer-mediatek: error out on probe defer
>>
>> If the clocks are not yet present, because they are loaded after
>> the timer is initialized, we are unable to boot.
>> Check if the return value of timer_of_init and return on EPROBE_DEFER.
>>
>> Error seen is:
>> [    0.008337] Failed to get clock for /timer@10004000
>> [    0.013435] WARNING: CPU: 0 PID: 0 at ../drivers/clk/clk.c:3615
>> __clk_put+0xf0/0x120
>> [    0.021453] Modules linked in:
>> [    0.024614] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
>> 4.20.0-rc1-00063-g2859d9abd7e8 #2
>> [    0.032902] Hardware name: MediaTek MT7622 RFB1 board (DT)
>> [    0.038580] pstate: 20000085 (nzCv daIf -PAN -UAO)
>> [    0.043538] pc : __clk_put+0xf0/0x120
>> [    0.047328] lr : clk_put+0xc/0x18
>> [    0.050753] sp : ffff000009163ed0
>> [    0.054178] x29: ffff000009163ed0 x28: 0000000041010018
>> [    0.059676] x27: 0000000000000000 x26: 0000000000000000
>> [    0.065174] x25: ffff0000090cb008 x24: ffff80001dfd7800
>> [    0.070672] x23: ffff000008f934b8 x22: ffff80001dfdeae0
>> [    0.076169] x21: ffff80001dfdeae0 x20: fffffffffffffdfb
>> [    0.081668] x19: ffff00000929ac40 x18: ffffffffffffffff
>> [    0.087166] x17: 0000000000000000 x16: 0000000000000000
>> [    0.092664] x15: ffff0000091696c8 x14: ffff0000892cd70f
>> [    0.098162] x13: ffff0000092cd71d x12: ffff000009181348
>> [    0.103661] x11: ffff000009181000 x10: 0000000005f5e0ff
>> [    0.109159] x9 : 0000000000000040 x8 : ffff000009181400
>> [    0.114657] x7 : ffff80001c800270 x6 : 0000000000000000
>> [    0.120155] x5 : ffff80001c800248 x4 : 0000000000000000
>> [    0.125653] x3 : 0000000000000000 x2 : 0000000000000000
>> [    0.131151] x1 : 0000000000000000 x0 : fffffffffffffdfb
>> [    0.136649] Call trace:
>> [    0.139175]  __clk_put+0xf0/0x120
>> [    0.142605]  timer_of_cleanup+0x60/0x7c
>> [    0.146572]  mtk_gpt_init+0x18c/0x1a0
>> [    0.150359]  timer_probe+0x74/0x10c
>> [    0.153969]  time_init+0x14/0x44
>> [    0.157307]  start_kernel+0x29c/0x414
>> [    0.161098] ---[ end trace c3137b005300b618 ]---
>>
>> Fixes: a0858f937960 ("clocksource/drivers/timer-mediatek: Convert the driver to
>> timer-of")
>> Fixes: e3af677607d9 ("clocksource/drivers/timer-mediatek: Add support for system
>> timer")
>> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
>> ---
>>  drivers/clocksource/timer-mediatek.c | 12 ++++++++++--
>>  1 file changed, 10 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/clocksource/timer-mediatek.c
>> b/drivers/clocksource/timer-mediatek.c
>> index eb10321f8517..d40c77a65b08 100644
>> --- a/drivers/clocksource/timer-mediatek.c
>> +++ b/drivers/clocksource/timer-mediatek.c
>> @@ -276,8 +276,12 @@ static int __init mtk_syst_init(struct device_node *node)
>>  	to.of_irq.handler = mtk_syst_handler;
>>
>>  	ret = timer_of_init(node, &to);
>> -	if (ret)
>> +	if (ret) {
>> +		if (ret == -EPROBE_DEFER)
>> +			return ret;
>> +
>>  		goto err;
>> +	}
>>
>>  	clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
>>  					TIMER_SYNC_TICKS, 0xffffffff);
>> @@ -301,8 +305,12 @@ static int __init mtk_gpt_init(struct device_node *node)
>>  	to.of_irq.handler = mtk_gpt_interrupt;
>>
>>  	ret = timer_of_init(node, &to);
>> -	if (ret)
>> +	if (ret) {
>> +		if (ret == -EPROBE_DEFER)
>> +			return ret;
>> +
>>  		goto err;
>> +	}
>>
>>  	/* Configure clock source */
>>  	mtk_gpt_setup(&to, TIMER_CLK_SRC, GPT_CTRL_OP_FREERUN);
> 
> I tried this patch, but it didn't work. I think *_OF_DECLARE() is not
> compatible with EPROBE_DEFER.
> 
> I also found the similar discussion about this issue:
> https://patchwork.kernel.org/patch/10580345/
> 

Got it. So from my research we would need to use CLK_OF_DECLARE_DRIVER for:
    mainpll (pll)

    syspll4_d16 (div)

    f10m_ref_sel (mux)

    infra_apxgpt_pd (gate)

Anyway, as a quick fix we can delete the device node. I'll reword you commit
message and I'll also reword commit message for 1/3

In the future please try to not put links into the commit message but explain
what is happening.

Regards,
Matthias