From: Julien Thierry <julien.thierry@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, daniel.thompson@linaro.org,
joel@joelfernandes.org, marc.zyngier@arm.com,
christoffer.dall@arm.com, james.morse@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
Julien Thierry <julien.thierry@arm.com>
Subject: [PATCH v6 15/24] arm64: Switch to PMR masking when starting CPUs
Date: Mon, 12 Nov 2018 11:57:06 +0000 [thread overview]
Message-ID: <1542023835-21446-16-git-send-email-julien.thierry@arm.com> (raw)
In-Reply-To: <1542023835-21446-1-git-send-email-julien.thierry@arm.com>
Once the boot CPU has been prepared or a new secondary CPU has been
brought up, use ICC_PMR_EL1 to mask interrupts on that CPU and clear
PSR.I bit.
Since ICC_PMR_EL1 is initialized at CPU bringup, avoid overwriting
it in the GICv3 driver.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/kernel/smp.c | 27 +++++++++++++++++++++++++++
drivers/irqchip/irq-gic-v3.c | 8 +++++++-
2 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 8dc9dde..e495360 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -35,6 +35,7 @@
#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
+#include <linux/irqchip/arm-gic-v3.h>
#include <linux/percpu.h>
#include <linux/clockchips.h>
#include <linux/completion.h>
@@ -175,6 +176,25 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
return ret;
}
+static void init_gic_priority_masking(void)
+{
+ u32 gic_sre = gic_read_sre();
+ u32 cpuflags;
+
+ if (WARN_ON(!(gic_sre & ICC_SRE_EL1_SRE)))
+ return;
+
+ WARN_ON(!irqs_disabled());
+
+ gic_write_pmr(GIC_PRIO_IRQOFF);
+
+ cpuflags = read_sysreg(daif);
+
+ /* We can only unmask PSR.I if we can take aborts */
+ if (!(cpuflags & PSR_A_BIT))
+ write_sysreg(cpuflags & ~PSR_I_BIT, daif);
+}
+
/*
* This is the secondary CPU boot entry. We're using this CPUs
* idle thread stack, but a set of temporary page tables.
@@ -211,6 +231,9 @@ asmlinkage notrace void secondary_start_kernel(void)
*/
check_local_cpu_capabilities();
+ if (system_supports_irq_prio_masking())
+ init_gic_priority_masking();
+
if (cpu_ops[cpu]->cpu_postboot)
cpu_ops[cpu]->cpu_postboot();
@@ -421,6 +444,10 @@ void __init smp_prepare_boot_cpu(void)
* and/or scheduling is enabled.
*/
apply_boot_alternatives();
+
+ /* Conditionally switch to GIC PMR for interrupt masking */
+ if (system_supports_irq_prio_masking())
+ init_gic_priority_masking();
}
static u64 __init of_get_cpu_mpidr(struct device_node *dn)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index dbf5247..7f0b2e8 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -414,6 +414,9 @@ static u32 gic_get_pribits(void)
static bool gic_has_group0(void)
{
u32 val;
+ u32 old_pmr;
+
+ old_pmr = gic_read_pmr();
/*
* Let's find out if Group0 is under control of EL3 or not by
@@ -429,6 +432,8 @@ static bool gic_has_group0(void)
gic_write_pmr(BIT(8 - gic_get_pribits()));
val = gic_read_pmr();
+ gic_write_pmr(old_pmr);
+
return val != 0;
}
@@ -590,7 +595,8 @@ static void gic_cpu_sys_reg_init(void)
group0 = gic_has_group0();
/* Set priority mask register */
- write_gicreg(DEFAULT_PMR_VALUE, ICC_PMR_EL1);
+ if (!gic_prio_masking_enabled())
+ write_gicreg(DEFAULT_PMR_VALUE, ICC_PMR_EL1);
/*
* Some firmwares hand over to the kernel with the BPR changed from
--
1.9.1
next prev parent reply other threads:[~2018-11-12 11:58 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-12 11:56 [PATCH v6 00/24] arm64: provide pseudo NMI with GICv3 Julien Thierry
2018-11-12 11:56 ` [PATCH v6 01/24] arm64: Remove unused daif related functions/macros Julien Thierry
2018-11-29 16:26 ` Mark Rutland
2018-11-30 18:03 ` Catalin Marinas
2018-11-12 11:56 ` [PATCH v6 02/24] arm64: cpufeature: Set SYSREG_GIC_CPUIF as a boot system feature Julien Thierry
2018-11-12 18:00 ` Suzuki K Poulose
2018-11-29 16:27 ` Mark Rutland
2018-11-30 18:07 ` Catalin Marinas
2018-11-12 11:56 ` [PATCH v6 03/24] arm64: cpufeature: Add cpufeature for IRQ priority masking Julien Thierry
2018-11-12 18:02 ` Suzuki K Poulose
2018-11-29 17:12 ` Mark Rutland
2018-12-03 10:33 ` Julien Thierry
2018-11-30 18:07 ` Catalin Marinas
2018-11-12 11:56 ` [PATCH v6 04/24] arm/arm64: gic-v3: Add PMR and RPR accessors Julien Thierry
2018-11-29 16:32 ` Mark Rutland
2018-11-30 18:07 ` Catalin Marinas
2018-11-12 11:56 ` [PATCH v6 05/24] irqchip/gic-v3: Switch to PMR masking before calling IRQ handler Julien Thierry
2018-11-29 18:12 ` Mark Rutland
2018-11-30 9:18 ` Julien Thierry
2018-12-04 16:21 ` Catalin Marinas
2018-11-12 11:56 ` [PATCH v6 06/24] arm64: ptrace: Provide definitions for PMR values Julien Thierry
2018-11-29 16:40 ` Mark Rutland
2018-11-30 8:53 ` Julien Thierry
2018-11-30 10:38 ` Daniel Thompson
2018-11-30 11:03 ` Julien Thierry
2018-11-12 11:56 ` [PATCH v6 07/24] arm64: Make PMR part of task context Julien Thierry
2018-11-29 16:46 ` Mark Rutland
2018-11-30 9:25 ` Julien Thierry
2018-12-04 17:09 ` Catalin Marinas
2018-12-04 17:30 ` Julien Thierry
2018-11-12 11:56 ` [PATCH v6 08/24] arm64: Unmask PMR before going idle Julien Thierry
2018-11-29 17:44 ` Mark Rutland
2018-11-30 10:55 ` Julien Thierry
2018-11-30 13:37 ` Mark Rutland
2018-12-03 10:38 ` Julien Thierry
2018-11-12 11:57 ` [PATCH v6 09/24] arm64: kvm: Unmask PMR before entering guest Julien Thierry
2018-11-12 11:57 ` [PATCH v6 10/24] arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking Julien Thierry
2018-12-04 17:36 ` Catalin Marinas
2018-12-05 16:55 ` Julien Thierry
2018-12-05 18:26 ` Catalin Marinas
2018-12-06 9:50 ` Julien Thierry
2018-12-10 14:39 ` Catalin Marinas
2018-11-12 11:57 ` [PATCH v6 11/24] arm64: daifflags: Include PMR in daifflags restore operations Julien Thierry
2018-11-12 11:57 ` [PATCH v6 12/24] arm64: alternative: Allow alternative status checking per cpufeature Julien Thierry
2018-11-12 11:57 ` [PATCH v6 13/24] arm64: alternative: Apply alternatives early in boot process Julien Thierry
2018-11-12 11:57 ` [PATCH v6 14/24] irqchip/gic-v3: Factor group0 detection into functions Julien Thierry
2018-11-12 11:57 ` Julien Thierry [this message]
2018-12-04 17:51 ` [PATCH v6 15/24] arm64: Switch to PMR masking when starting CPUs Catalin Marinas
2018-12-04 18:11 ` Julien Thierry
2018-11-12 11:57 ` [PATCH v6 16/24] arm64: gic-v3: Implement arch support for priority masking Julien Thierry
2018-11-12 11:57 ` [PATCH v6 17/24] irqchip/gic-v3: Detect if GIC can support pseudo-NMIs Julien Thierry
2018-11-12 11:57 ` [PATCH v6 18/24] irqchip/gic-v3: Handle pseudo-NMIs Julien Thierry
2018-11-12 11:57 ` [PATCH v6 19/24] irqchip/gic: Add functions to access irq priorities Julien Thierry
2018-11-12 11:57 ` [PATCH v6 20/24] irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI Julien Thierry
2018-11-12 11:57 ` [PATCH v6 21/24] arm64: Handle serror in NMI context Julien Thierry
2018-12-04 18:09 ` Catalin Marinas
2018-12-05 13:02 ` James Morse
2018-11-12 11:57 ` [PATCH v6 22/24] arm64: Skip preemption when exiting an NMI Julien Thierry
2018-11-12 11:57 ` [PATCH v6 23/24] arm64: Skip irqflags tracing for NMI in IRQs disabled context Julien Thierry
2018-11-12 11:57 ` [PATCH v6 24/24] arm64: Enable the support of pseudo-NMIs Julien Thierry
2018-11-12 12:00 ` [PATCH v6 00/24] arm64: provide pseudo NMI with GICv3 Julien Thierry
2018-11-13 14:43 ` Julien Thierry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542023835-21446-16-git-send-email-julien.thierry@arm.com \
--to=julien.thierry@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=daniel.thompson@linaro.org \
--cc=james.morse@arm.com \
--cc=joel@joelfernandes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).