linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-kbuild@vger.kernel.org
Cc: Sam Ravnborg <sam@ravnborg.org>,
	Nicolas Pitre <nicolas.pitre@linaro.org>,
	Rasmus Villemoes <linux@rasmusvillemoes.dk>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Michal Marek <michal.lkml@markovi.net>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 3/8] kbuild: refactor modversions build rules
Date: Thu, 15 Nov 2018 17:27:10 +0900	[thread overview]
Message-ID: <1542270435-11181-4-git-send-email-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <1542270435-11181-1-git-send-email-yamada.masahiro@socionext.com>

Let $(CC) compile objects into normal files *.o instead of .tmp_*.o
whether CONFIG_MODVERSIONS is enabled or not. This will help simplify
build rules a lot.

I guess the reason of using .tmp_*.o for intermediate objects was
to avoid leaving incomplete *.o file (, whose timestamp says it is
up-to-date) when the genksyms tool failed for some reasons.

It no longer matters because any targets are deleted on errors since
commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 scripts/Makefile.build | 54 ++++++++++++++++----------------------------------
 1 file changed, 17 insertions(+), 37 deletions(-)

diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 7af21a8..7f3ca6e 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -154,35 +154,30 @@ $(obj)/%.ll: $(src)/%.c FORCE
 # (See cmd_cc_o_c + relevant part of rule_cc_o_c)
 
 quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
+      cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
 
-ifndef CONFIG_MODVERSIONS
-cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
-
-else
+ifdef CONFIG_MODVERSIONS
 # When module versioning is enabled the following steps are executed:
-# o compile a .tmp_<file>.o from <file>.c
-# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
-#   not export symbols, we just rename .tmp_<file>.o to <file>.o and
-#   are done.
+# o compile a <file>.o from <file>.c
+# o if <file>.o doesn't contain a __ksymtab version, i.e. does
+#   not export symbols, it's done.
 # o otherwise, we calculate symbol versions using the good old
 #   genksyms on the preprocessed source and postprocess them in a way
 #   that they are usable as a linker script
-# o generate <file>.o from .tmp_<file>.o using the linker to
+# o generate .tmp_<file>.o from <file>.o using the linker to
 #   replace the unresolved symbols __crc_exported_symbol with
 #   the actual value of the checksum generated by genksyms
-
-cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
+# o remove .tmp_<file>.o to <file>.o
 
 cmd_modversions_c =								\
-	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then		\
+	if $(OBJDUMP) -h $@ | grep -q __ksymtab; then				\
 		$(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
 		    > $(@D)/.tmp_$(@F:.o=.ver);					\
 										\
-		$(LD) $(KBUILD_LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 		\
+		$(LD) $(KBUILD_LDFLAGS) -r -o $(@D)/.tmp_$(@F) $@ 		\
 			-T $(@D)/.tmp_$(@F:.o=.ver);				\
-		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);		\
-	else									\
 		mv -f $(@D)/.tmp_$(@F) $@;					\
+		rm -f $(@D)/.tmp_$(@F:.o=.ver);					\
 	fi;
 endif
 
@@ -241,19 +236,12 @@ ifneq ($(RETPOLINE_CFLAGS),)
 endif
 endif
 
-
-ifdef CONFIG_MODVERSIONS
-objtool_o = $(@D)/.tmp_$(@F)
-else
-objtool_o = $(@)
-endif
-
 # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
 cmd_objtool = $(if $(patsubst y%,, \
 	$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
-	$(__objtool_obj) $(objtool_args) "$(objtool_o)";)
+	$(__objtool_obj) $(objtool_args) $@;)
 objtool_obj = $(if $(patsubst y%,, \
 	$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
 	$(__objtool_obj))
@@ -357,34 +345,26 @@ $(obj)/%.s: $(src)/%.S FORCE
 	$(call if_changed_dep,cpp_s_S)
 
 quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
+      cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
 
-ifndef CONFIG_MODVERSIONS
-cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
-
-else
+ifdef CONFIG_MODVERSIONS
 
 ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h)
 
-ifeq ($(ASM_PROTOTYPES),)
-cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
-
-else
+ifneq ($(ASM_PROTOTYPES),)
 
 # versioning matches the C process described above, with difference that
 # we parse asm-prototypes.h C header to get function definitions.
 
-cmd_as_o_S = $(CC) $(a_flags) -c -o $(@D)/.tmp_$(@F) $<
-
 cmd_modversions_S =								\
-	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then		\
+	if $(OBJDUMP) -h $@ | grep -q __ksymtab; then				\
 		$(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
 		    > $(@D)/.tmp_$(@F:.o=.ver);					\
 										\
-		$(LD) $(KBUILD_LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 		\
+		$(LD) $(KBUILD_LDFLAGS) -r -o $(@D)/.tmp_$(@F) $@ 		\
 			-T $(@D)/.tmp_$(@F:.o=.ver);				\
-		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);		\
-	else									\
 		mv -f $(@D)/.tmp_$(@F) $@;					\
+		rm -f $(@D)/.tmp_$(@F:.o=.ver);					\
 	fi;
 endif
 endif
-- 
2.7.4


  parent reply	other threads:[~2018-11-15  8:28 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-15  8:27 [PATCH 0/8] kbuild: clean-up modversion, TRIM_UNUSED_KSYMS, if_changed_rule, etc Masahiro Yamada
2018-11-15  8:27 ` [PATCH 1/8] kbuild: remove redundant 'set -e' from filechk_* defines Masahiro Yamada
2018-11-15  8:27 ` [PATCH 2/8] kbuild: remove redundant 'set -e' from sub_cmd_record_mcount Masahiro Yamada
2018-11-15  8:27 ` Masahiro Yamada [this message]
2018-11-16 20:01   ` [PATCH 3/8] kbuild: refactor modversions build rules Sam Ravnborg
2018-11-18  5:00     ` Masahiro Yamada
2018-11-15  8:27 ` [PATCH 4/8] kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS Masahiro Yamada
2018-11-16  5:13   ` Nicolas Pitre
2018-11-16  7:13     ` Masahiro Yamada
2018-11-16 17:49       ` Nicolas Pitre
2018-11-20  1:13         ` Masahiro Yamada
2018-11-15  8:27 ` [PATCH 5/8] kbuild: change if_changed_rule to accept multi-line recipe Masahiro Yamada
2018-11-15  9:12   ` Rasmus Villemoes
2018-11-16  1:37     ` Masahiro Yamada
2018-11-15  8:27 ` [PATCH 6/8] kbuild: remove trailing semicolon from cmd_* passed to if_changed_rule Masahiro Yamada
2018-11-15  8:27 ` [PATCH 7/8] kbuild: refactor if_changed and if_changed_dep Masahiro Yamada
2018-11-15  8:27 ` [PATCH 8/8] kbuild: remove redundant 'set -e' from cmd_* defines Masahiro Yamada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1542270435-11181-4-git-send-email-yamada.masahiro@socionext.com \
    --to=yamada.masahiro@socionext.com \
    --cc=linux-kbuild@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=michal.lkml@markovi.net \
    --cc=nicolas.pitre@linaro.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).