From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linuxarm@huawei.com>, <linux-kernel@vger.kernel.org>,
<linux-scsi@vger.kernel.org>,
Xiang Chen <chenxiang66@hisilicon.com>,
"John Garry" <john.garry@huawei.com>
Subject: [PATCH 3/4] scsi: hisi_sas: Make sg_tablesize consistent value
Date: Tue, 20 Nov 2018 22:59:03 +0800 [thread overview]
Message-ID: <1542725944-244183-4-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1542725944-244183-1-git-send-email-john.garry@huawei.com>
From: Xiang Chen <chenxiang66@hisilicon.com>
Sht->sg_tablesize is set in the driver, and it will be assigned to
shost->sg_tablesize in SCSI mid-layer. So it is not necessary to
assign shost->sg_table one more time in the driver.
In addition to the change, change each scsi_host_template.sg_tablesize
to HISI_SAS_SGE_PAGE_CNT instead of SG_ALL.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 1 -
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +--
4 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d13a662..cbda48e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -2410,7 +2410,6 @@ int hisi_sas_probe(struct platform_device *pdev,
shost->max_lun = ~0;
shost->max_channel = 1;
shost->max_cmd_len = 16;
- shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
if (hisi_hba->hw->slot_index_alloc) {
shost->can_queue = hisi_hba->hw->max_command_entries;
shost->cmd_per_lun = hisi_hba->hw->max_command_entries;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index d24342b..2d035cc 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1815,7 +1815,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e78a97e..79e58a7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3570,7 +3570,7 @@ struct device_attribute *host_attrs_v2_hw[] = {
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 7e2b020..8a08078 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2224,7 +2224,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2366,7 +2366,6 @@ struct device_attribute *host_attrs_v3_hw[] = {
shost->max_lun = ~0;
shost->max_channel = 1;
shost->max_cmd_len = 16;
- shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
shost->can_queue = hisi_hba->hw->max_command_entries -
HISI_SAS_RESERVED_IPTT_CNT;
shost->cmd_per_lun = hisi_hba->hw->max_command_entries -
--
1.9.1
next prev parent reply other threads:[~2018-11-20 14:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-20 14:59 [PATCH 0/4] hisi_sas: DIF/DIX support John Garry
2018-11-20 14:59 ` [PATCH 1/4] scsi: Add scsi_prot_op_normal() John Garry
2018-11-20 16:19 ` Christoph Hellwig
2018-11-20 16:36 ` John Garry
2018-11-20 14:59 ` [PATCH 2/4] scsi: hisi_sas: Relocate some code to reduce complexity John Garry
2018-11-20 14:59 ` John Garry [this message]
2018-11-21 11:02 ` [PATCH 3/4] scsi: hisi_sas: Make sg_tablesize consistent value Steffen Maier
2018-11-21 11:08 ` Steffen Maier
2018-11-21 11:45 ` John Garry
2018-11-20 14:59 ` [PATCH 4/4] scsi: hisi_sas: Add support for DIF/DIX feature for v3 hw John Garry
2018-11-24 17:50 ` kbuild test robot
2018-11-26 15:42 ` John Garry
2018-12-05 0:50 ` [kbuild-all] " Li, Philip
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542725944-244183-4-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=chenxiang66@hisilicon.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).