From: Taniya Das <tdas@codeaurora.org>
To: Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>
Cc: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, robh@kernel.org,
Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v10 0/3] Add support for LPASS clock controller for SDM845
Date: Thu, 22 Nov 2018 13:23:38 +0530 [thread overview]
Message-ID: <1542873221-13693-1-git-send-email-tdas@codeaurora.org> (raw)
[v10]
* Separate change to add protected-clocks list in GCC binding.
* Remove the clock support 'LPASS_AUDIO_WRAPPER_AON_CLK' as it is always ON
clock.
* Add few comments for module description and match table.
[v9]
* Update GCC documentation binding with the protected-clocks list.
* Update the GCC code to add the GCC lpass clocks.
* This depends on the acceptance of
https://lore.kernel.org/lkml/20181105194011.43770-1-swboyd@chromium.org/
[v8]
* Add CLK_IS_CRITICAL for GCC lpass clocks for lpass clocks access to go
through always.
[v7]
* Cleanup header file inclusions.
* Move the comments along with the flags.
* Update the commit with details for CLK_IGNORE_UNUSED.
[v6]
* Update the logic to register the lpass clocks when the device tree property
is not present.
* Add the CLK_IGNORE_UNUSED flag for the lpass clocks to not gate the clocks
at late_init.
[v5]
* Address the comments in device tree binding to update the reg-names,
update the unit address in lpass clock node example and also
add reg property for the gcc clock node.
* Update the lpass driver to take care of the reg-names.
[v4]
* Update the description in GCC Documentation binding for
'qcom,lpass-protected'.
* Remove 'qcom,lpass-protected' from LPASS Documentation binding.
* Update KConfig to use Low Power Audio Subsystem.
* Add module_exit() and also update return value for
devm_ioremap_resource failure.
[v3]
* Add a device tree property to identify lpass protected GCC clocks.
* Update the GCC driver code to register the lpass clocks when the flag is
defined.
* Add comment for clocks using the BRANCH_HALT_SKIP flag.
* Use platform APIs instead of of_address_to_resource.
* Replace devm_ioremap with devm_ioremap_resource.
* Use fixed index for 'lpass_cc' & 'lpass_qdsp6ss' in probe.
[v2]
* Make gcc_lpass_sway_clk static.
* Remove using child nodes and use reg-names to differentiate various
domains of LPASS CC.
Add support for the lpass clock controller found on SDM845 based devices.
This would allow lpass peripheral loader drivers to control the clocks to
bring the subsystem out of reset.
Taniya Das (3):
dt-bindings: clock: Update GCC bindings for protected-clocks
dt-bindings: clock: Introduce QCOM LPASS clock bindings
clk: qcom: Add lpass clock controller driver for SDM845
.../devicetree/bindings/clock/qcom,gcc.txt | 16 ++
.../devicetree/bindings/clock/qcom,lpasscc.txt | 26 +++
drivers/clk/qcom/Kconfig | 9 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-sdm845.c | 30 ++++
drivers/clk/qcom/lpasscc-sdm845.c | 179 +++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-sdm845.h | 2 +
include/dt-bindings/clock/qcom,lpass-sdm845.h | 15 ++
8 files changed, 278 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
create mode 100644 drivers/clk/qcom/lpasscc-sdm845.c
create mode 100644 include/dt-bindings/clock/qcom,lpass-sdm845.h
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
next reply other threads:[~2018-11-22 7:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-22 7:53 Taniya Das [this message]
2018-11-22 7:53 ` [PATCH v10 1/3] dt-bindings: clock: Update GCC bindings for protected-clocks Taniya Das
2018-11-26 18:58 ` Rob Herring
2018-11-22 7:53 ` [PATCH v10 2/3] dt-bindings: clock: Introduce QCOM LPASS clock bindings Taniya Das
2018-11-26 18:59 ` Rob Herring
2018-11-22 7:53 ` [PATCH v10 3/3] clk: qcom: Add lpass clock controller driver for SDM845 Taniya Das
2018-11-27 9:14 ` Stephen Boyd
2018-11-30 18:17 ` Taniya Das
2018-11-28 21:10 ` Stephen Boyd
2018-11-30 18:19 ` Taniya Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542873221-13693-1-git-send-email-tdas@codeaurora.org \
--to=tdas@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).