From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=3.0 tests=DKIMWL_WL_MED,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5211CC5CFFE for ; Tue, 11 Dec 2018 10:09:28 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id EF3612081B for ; Tue, 11 Dec 2018 10:09:27 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=microchiptechnology.onmicrosoft.com header.i=@microchiptechnology.onmicrosoft.com header.b="CCpT9rv4" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org EF3612081B Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=microchip.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726418AbeLKKJ1 (ORCPT ); Tue, 11 Dec 2018 05:09:27 -0500 Received: from esa2.microchip.iphmx.com ([68.232.149.84]:64297 "EHLO esa2.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726176AbeLKKJS (ORCPT ); Tue, 11 Dec 2018 05:09:18 -0500 X-IronPort-AV: E=Sophos;i="5.56,342,1539673200"; d="scan'208";a="24073267" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa2.microchip.iphmx.com with ESMTP/TLS/DHE-RSA-AES256-SHA; 11 Dec 2018 03:09:17 -0700 Received: from NAM01-BY2-obe.outbound.protection.outlook.com (10.10.215.89) by email.microchip.com (10.10.76.38) with Microsoft SMTP Server (TLS) id 14.3.352.0; Tue, 11 Dec 2018 03:09:16 -0700 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=microchiptechnology.onmicrosoft.com; s=selector1-microchiptechnology-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=PQZjE20IDnmXXt73/jZcsBxEhKYoFeYu/0JcvUi/UiY=; b=CCpT9rv41rRHnRavfeCA2ssxFe3jKuppA2jrU06vTxa731KstRWI1A+CDc66Ay4Tqb8/lbPH7z42YTICC0VhVkFxLJV08f2PSNj3XEuiaY7Uy6HZmMsHaEPBzKkVMb1M1d2vaO9VU/k/rhWDDoyr8K13bmw2w0/9k4xGLapFM1k= Received: from DM5PR1101MB2249.namprd11.prod.outlook.com (10.174.105.17) by DM5PR1101MB2123.namprd11.prod.outlook.com (10.174.104.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.1404.22; Tue, 11 Dec 2018 10:09:15 +0000 Received: from DM5PR1101MB2249.namprd11.prod.outlook.com ([fe80::3439:ab82:a10e:6bb]) by DM5PR1101MB2249.namprd11.prod.outlook.com ([fe80::3439:ab82:a10e:6bb%2]) with mapi id 15.20.1404.026; Tue, 11 Dec 2018 10:09:15 +0000 From: To: , , , , CC: , , , , , , Subject: [RESEND PATCH v3 3/3] regulator: mcp16502: add regulator driver for MCP16502 Thread-Topic: [RESEND PATCH v3 3/3] regulator: mcp16502: add regulator driver for MCP16502 Thread-Index: AQHUkTmSRQO8vdR2CEWafmmGWx4+QQ== Date: Tue, 11 Dec 2018 10:09:15 +0000 Message-ID: <1544522876-15967-4-git-send-email-andrei.stefanescu@microchip.com> References: <1544522876-15967-1-git-send-email-andrei.stefanescu@microchip.com> In-Reply-To: <1544522876-15967-1-git-send-email-andrei.stefanescu@microchip.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-clientproxiedby: VI1PR08CA0205.eurprd08.prod.outlook.com (2603:10a6:802:15::14) To DM5PR1101MB2249.namprd11.prod.outlook.com (2603:10b6:4:52::17) authentication-results: spf=none (sender IP is ) smtp.mailfrom=Andrei.Stefanescu@microchip.com; x-ms-exchange-messagesentrepresentingtype: 1 x-originating-ip: [94.177.32.154] x-ms-publictraffictype: Email x-microsoft-exchange-diagnostics: 1;DM5PR1101MB2123;6:H2W4qjb6HMZ5WPWnHxnuIPM9235of9Y3VTwPnclncMFRBuT6fHxGpNYmUnHTFpdCgvFY621jxTrnVCNFRLrfND/OyWlpUdqBiPbQsaNrGzT9XSe9Wv9xEeCsyv9BLOcI4T+qW67TyWh1PeNz2QNzb5uXq8u0TkQ5oIo6QLWIbB8dQVI21bpbdyAxSSWy7MIfnntP2/WEgyCge7mcP2r/kWqcU4q9AEuIgaqlUfeleg/BzeFLaKaOGrOzgYTLfGqB5v8F6i9CqTTjg77Z/t7KN2l0DGH7TskW2tmOeCyTgOyNRh2RR2BVf5RmhTm6gTp5b01b7gS3vU0E1+d+Ot3sggelH5cOsbk1/o9WjS5ULIrPo23rNfjoQJoT8xUeq5bB4nLW5PaZiJ7YyYnXoYIVSaQqfAcfO9iTEm8/4Jwqs5jEfD1DRCVpLAGfNSIj9aKGQp/fHU4QeVGly4mSow82fw==;5:3vqCQ6uqRcgbdAuMG+8BZZSy4lhzsHqSN1XgYLfavc67M05hgbIlOpVH46grtXm/4hor4S2woEwuJE5sO1UiibnEGEf5nzl+03yCivc/x1CJspGXIFXrB7b7IJM5XAilhJR+1Du2+PrwEH+QAy4OU9rz6iI+UlDHaB7sqP2qJ7M=;7:A0Awqn/lXclXmmw/JTcZmyb10P6ail5flhYmGZykKF51v3yPzUdI+6vFACuO1vhUZ2mb7QH9w6brW/emZGQNh5Sc26GWb3AdIjforqlTvsAf0wbk5x/4nyDBpVFIpU5T120sZgmDyDhSmwsL7TPW0A== x-ms-office365-filtering-correlation-id: 6e317771-d3d4-442b-2bbc-08d65f50b4a1 x-microsoft-antispam: BCL:0;PCL:0;RULEID:(2390098)(7020095)(4652040)(8989299)(4534185)(4627221)(201703031133081)(201702281549075)(8990200)(5600074)(711020)(2017052603328)(7153060)(7193020);SRVR:DM5PR1101MB2123; x-ms-traffictypediagnostic: DM5PR1101MB2123: x-microsoft-antispam-prvs: x-ms-exchange-senderadcheck: 1 x-exchange-antispam-report-cfa-test: BCL:0;PCL:0;RULEID:(6040522)(2401047)(5005006)(8121501046)(3002001)(3231455)(999002)(944501520)(52105112)(10201501046)(93006095)(93001095)(148016)(149066)(150057)(6041310)(20161123564045)(20161123560045)(20161123558120)(201703131423095)(201702281528075)(20161123555045)(201703061421075)(201703061406153)(20161123562045)(201708071742011)(7699051)(76991095);SRVR:DM5PR1101MB2123;BCL:0;PCL:0;RULEID:;SRVR:DM5PR1101MB2123; x-forefront-prvs: 08831F51DC x-forefront-antispam-report: SFV:NSPM;SFS:(10009020)(366004)(396003)(376002)(346002)(136003)(39860400002)(189003)(199004)(45074003)(256004)(14444005)(217873002)(486006)(97736004)(446003)(2906002)(81166006)(2501003)(8676002)(81156014)(11346002)(8936002)(71200400001)(4744004)(71190400001)(86362001)(68736007)(575784001)(72206003)(25786009)(36756003)(6512007)(2201001)(53946003)(7736002)(53936002)(478600001)(6486002)(14454004)(316002)(54906003)(3846002)(76176011)(110136005)(66066001)(107886003)(106356001)(105586002)(305945005)(39060400002)(99286004)(2616005)(476003)(102836004)(5660300001)(386003)(6116002)(6436002)(186003)(6506007)(4326008)(52116002)(26005);DIR:OUT;SFP:1101;SCL:1;SRVR:DM5PR1101MB2123;H:DM5PR1101MB2249.namprd11.prod.outlook.com;FPR:;SPF:None;LANG:en;PTR:InfoNoRecords;MX:1;A:1; received-spf: None (protection.outlook.com: microchip.com does not designate permitted sender hosts) x-microsoft-antispam-message-info: sk8+o2xWnd/s+rmjoHrx3e/Fvbiq4q1AG6GCmo8wglNqrlywL5TSQWoCiTsRzu/vRPMs+M7inao2mSwrkD1lY9rt6gcV4r6TGqa0cq0pWPZMAPcmLMQBgxvKhLe9/ySo8k9AH+GkJ3QqlagPKMvd+eavQ2RB3p9QwzvIuG1eNkXzi0LJG2PnIAtAwPAWoNu+llJzB7/BuI7zowxmvvLItoPSrUWZn8M1a5bzEhbBlkYq3C/Qqn9LcLMgVO7W8JBAlKmgV+888p1sI+ca6dWMSiX/LNYnWFzEF3AoAXH5e2TRRz5Iz50af9WRcWE+4UAh spamdiagnosticoutput: 1:99 spamdiagnosticmetadata: NSPM Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-MS-Exchange-CrossTenant-Network-Message-Id: 6e317771-d3d4-442b-2bbc-08d65f50b4a1 X-MS-Exchange-CrossTenant-originalarrivaltime: 11 Dec 2018 10:09:15.5220 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 3f4057f3-b418-4d4e-ba84-d55b4e897d88 X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM5PR1101MB2123 X-OriginatorOrg: microchip.com Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds a regulator driver for the MCP16502 PMIC. This drivers supports basic operations through the regulator interface such as: - setting/reading voltage - setting/reading operating mode - reading current status - transitioning to/from suspend-to-ram and standby power states Signed-off-by: Andrei Stefanescu --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/mcp16502.c | 555 +++++++++++++++++++++++++++++++++++++++= ++++ 3 files changed, 565 insertions(+) create mode 100644 drivers/regulator/mcp16502.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 926cee0..719d9d6 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -567,6 +567,15 @@ config REGULATOR_MC13892 Say y here to support the regulators found on the Freescale MC13892 PMIC. =20 +config REGULATOR_MCP16502 + tristate "Microchip MCP16502 PMIC" + depends on I2C && OF + help + Say y here to support the MCP16502 PMIC. This driver supports + basic operations (get/set voltage, get/set operating mode) + through the regulator interface. In addition it enables + suspend-to-ram/standby transition. + config REGULATOR_MT6311 tristate "MediaTek MT6311 PMIC" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 72488ef..b12e1c9 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX77802) +=3D max77802-regulator.= o obj-$(CONFIG_REGULATOR_MC13783) +=3D mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) +=3D mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=3D mc13xxx-regulator-core.o +obj-$(CONFIG_REGULATOR_MCP16502) +=3D mcp16502.o obj-$(CONFIG_REGULATOR_MT6311) +=3D mt6311-regulator.o obj-$(CONFIG_REGULATOR_MT6323) +=3D mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6380) +=3D mt6380-regulator.o diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c new file mode 100644 index 0000000..54db3df --- /dev/null +++ b/drivers/regulator/mcp16502.c @@ -0,0 +1,555 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * MCP16502 PMIC driver + * + * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries + * + * Author: Andrei Stefanescu + * + * Inspired from tps65086-regulator.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VDD_LOW_SEL 0x0D +#define VDD_HIGH_SEL 0x3F + +#define MCP16502_FLT BIT(7) +#define MCP16502_ENS BIT(0) + +/* + * + * The PMIC has four sets of registers corresponding to four power modes: + * Performance, Active, Low-power, Hibernate. + * + * Registers: + * Each regulator has a register for each power mode. To access a register + * for a specific regulator and mode BASE_* and OFFSET_* need to be added. + * + * Operating modes: + * In order for the PMIC to transition to operating modes it has to be + * controlled via GPIO lines called LPM and HPM. + * + * The registers are fully configurable such that you can put all regulato= rs in + * a low-power state while the PMIC is in Active mode. They are supposed t= o be + * configured at startup and then simply transition to/from a global low-p= ower + * state by setting the GPIO lpm pin high/low. + * + * This driver keeps the PMIC in Active mode, Low-power state is set for t= he + * regulators by enabling/disabling operating mode (FPWM or Auto PFM). + * + * The PMIC's Low-power and Hibernate modes are used during standby/suspen= d. + * To enter standby/suspend the PMIC will go to Low-power mode. From there= , it + * will transition to Hibernate when the PWRHLD line is set to low by the = MPU. + */ + +/* + * This function is useful for iterating over all regulators and accessing= their + * registers in a generic way or accessing a regulator device by its id. + */ +#define MCP16502_BASE(i) (((i) + 1) << 4) +#define MCP16502_STAT_BASE(i) ((i) + 5) + +#define MCP16502_OFFSET_MODE_A 0 +#define MCP16502_OFFSET_MODE_LPM 1 +#define MCP16502_OFFSET_MODE_HIB 2 + +#define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL +#define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE +#define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY + +#define MCP16502_MODE_AUTO_PFM 0 +#define MCP16502_MODE_FPWM BIT(6) + +#define MCP16502_VSEL 0x3F +#define MCP16502_EN BIT(7) +#define MCP16502_MODE BIT(6) + +#define MCP16502_MIN_REG 0x0 +#define MCP16502_MAX_REG 0x65 + +static unsigned int mcp16502_of_map_mode(unsigned int mode) +{ + if (mode =3D=3D REGULATOR_MODE_NORMAL || mode =3D=3D REGULATOR_MODE_IDLE) + return mode; + + return REGULATOR_MODE_INVALID; +} + +#define MCP16502_REGULATOR(_name, _id, _ranges, _ops) \ + [_id] =3D { \ + .name =3D _name, \ + .regulators_node =3D of_match_ptr("regulators"), \ + .id =3D _id, \ + .ops =3D &(_ops), \ + .type =3D REGULATOR_VOLTAGE, \ + .owner =3D THIS_MODULE, \ + .linear_ranges =3D _ranges, \ + .n_linear_ranges =3D ARRAY_SIZE(_ranges), \ + .of_match =3D of_match_ptr(_name), \ + .of_map_mode =3D mcp16502_of_map_mode, \ + .vsel_reg =3D (((_id) + 1) << 4), \ + .vsel_mask =3D MCP16502_VSEL, \ + .enable_reg =3D (((_id) + 1) << 4), \ + .enable_mask =3D MCP16502_EN, \ + } + +enum { + BUCK1 =3D 0, + BUCK2, + BUCK3, + BUCK4, + LDO1, + LDO2, + NUM_REGULATORS +}; + +/* + * struct mcp16502 - PMIC representation + * @rdev: the regulators belonging to this chip + * @rmap: regmap to be used for I2C communication + * @lpm: LPM GPIO descriptor + */ +struct mcp16502 { + struct regulator_dev *rdev[NUM_REGULATORS]; + struct regmap *rmap; + struct gpio_desc *lpm; +}; + +/* + * mcp16502_gpio_set_mode() - set the GPIO corresponding value + * + * Used to prepare transitioning into hibernate or resuming from it. + */ +static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode) +{ + switch (mode) { + case MCP16502_OPMODE_ACTIVE: + gpiod_set_value(mcp->lpm, 0); + break; + case MCP16502_OPMODE_LPM: + case MCP16502_OPMODE_HIB: + gpiod_set_value(mcp->lpm, 1); + break; + default: + pr_err("%s: %d invalid\n", __func__, mode); + } +} + +/* + * mcp16502_get_reg() - get the PMIC's configuration register for opmode + * + * @rdev: the regulator whose register we are searching + * @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate + */ +static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode) +{ + int reg =3D MCP16502_BASE(rdev_get_id(rdev)); + + switch (opmode) { + case MCP16502_OPMODE_ACTIVE: + return reg + MCP16502_OFFSET_MODE_A; + case MCP16502_OPMODE_LPM: + return reg + MCP16502_OFFSET_MODE_LPM; + case MCP16502_OPMODE_HIB: + return reg + MCP16502_OFFSET_MODE_HIB; + default: + return -EINVAL; + } +} + +/* + * mcp16502_get_mode() - return the current operating mode of a regulator + * + * Note: all functions that are not part of entering/exiting standby/suspe= nd + * use the Active mode registers. + * + * Note: this is different from the PMIC's operatig mode, it is the + * MODE bit from the regulator's register. + */ +static unsigned int mcp16502_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + int ret, reg; + struct mcp16502 *mcp =3D rdev_get_drvdata(rdev); + + reg =3D mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE); + if (reg < 0) + return reg; + + ret =3D regmap_read(mcp->rmap, reg, &val); + if (ret) + return ret; + + switch (val & MCP16502_MODE) { + case MCP16502_MODE_FPWM: + return REGULATOR_MODE_NORMAL; + case MCP16502_MODE_AUTO_PFM: + return REGULATOR_MODE_IDLE; + default: + return REGULATOR_MODE_INVALID; + } +} + +/* + * _mcp16502_set_mode() - helper for set_mode and set_suspend_mode + * + * @rdev: the regulator for which we are setting the mode + * @mode: the regulator's mode (the one from MODE bit) + * @opmode: the PMIC's operating mode: Active/Low-power/Hibernate + */ +static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mod= e, + unsigned int op_mode) +{ + int val; + int reg; + struct mcp16502 *mcp =3D rdev_get_drvdata(rdev); + + reg =3D mcp16502_get_reg(rdev, op_mode); + if (reg < 0) + return reg; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + val =3D MCP16502_MODE_FPWM; + break; + case REGULATOR_MODE_IDLE: + val =3D MCP16502_MODE_AUTO_PFM; + break; + default: + return -EINVAL; + } + + reg =3D regmap_update_bits(mcp->rmap, reg, MCP16502_MODE, val); + return reg; +} + +/* + * mcp16502_set_mode() - regulator_ops set_mode + */ +static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode= ) +{ + return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_ACTIVE); +} + +/* + * mcp16502_get_status() - regulator_ops get_status + */ +static int mcp16502_get_status(struct regulator_dev *rdev) +{ + int ret; + unsigned int val; + struct mcp16502 *mcp =3D rdev_get_drvdata(rdev); + + ret =3D regmap_read(mcp->rmap, MCP16502_STAT_BASE(rdev_get_id(rdev)), + &val); + if (ret) + return ret; + + if (val & MCP16502_FLT) + return REGULATOR_STATUS_ERROR; + else if (val & MCP16502_ENS) + return REGULATOR_STATUS_ON; + else if (!(val & MCP16502_ENS)) + return REGULATOR_STATUS_OFF; + + return REGULATOR_STATUS_UNDEFINED; +} + +#ifdef CONFIG_SUSPEND +/* + * mcp16502_suspend_get_target_reg() - get the reg of the target suspend P= MIC + * mode + */ +static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev) +{ + switch (pm_suspend_target_state) { + case PM_SUSPEND_STANDBY: + return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM); + case PM_SUSPEND_ON: + case PM_SUSPEND_MEM: + return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB); + default: + dev_err(&rdev->dev, "invalid suspend target: %d\n", + pm_suspend_target_state); + } + + return -EINVAL; +} + +/* + * mcp16502_set_suspend_voltage() - regulator_ops set_suspend_voltage + */ +static int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV= ) +{ + struct mcp16502 *mcp =3D rdev_get_drvdata(rdev); + int sel =3D regulator_map_voltage_linear_range(rdev, uV, uV); + int reg =3D mcp16502_suspend_get_target_reg(rdev); + + if (sel < 0) + return sel; + + if (reg < 0) + return reg; + + return regmap_update_bits(mcp->rmap, reg, MCP16502_VSEL, sel); +} + +/* + * mcp16502_set_suspend_mode() - regulator_ops set_suspend_mode + */ +static int mcp16502_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + switch (pm_suspend_target_state) { + case PM_SUSPEND_STANDBY: + return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_LPM); + case PM_SUSPEND_ON: + case PM_SUSPEND_MEM: + return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_HIB); + default: + dev_err(&rdev->dev, "invalid suspend target: %d\n", + pm_suspend_target_state); + } + + return -EINVAL; +} + +/* + * mcp16502_set_suspend_enable() - regulator_ops set_suspend_enable + */ +static int mcp16502_set_suspend_enable(struct regulator_dev *rdev) +{ + struct mcp16502 *mcp =3D rdev_get_drvdata(rdev); + int reg =3D mcp16502_suspend_get_target_reg(rdev); + + if (reg < 0) + return reg; + + return regmap_update_bits(mcp->rmap, reg, MCP16502_EN, MCP16502_EN); +} + +/* + * mcp16502_set_suspend_disable() - regulator_ops set_suspend_disable + */ +static int mcp16502_set_suspend_disable(struct regulator_dev *rdev) +{ + struct mcp16502 *mcp =3D rdev_get_drvdata(rdev); + int reg =3D mcp16502_suspend_get_target_reg(rdev); + + if (reg < 0) + return reg; + + return regmap_update_bits(mcp->rmap, reg, MCP16502_EN, 0); +} +#endif /* CONFIG_SUSPEND */ + +static const struct regulator_ops mcp16502_buck_ops =3D { + .list_voltage =3D regulator_list_voltage_linear_range, + .map_voltage =3D regulator_map_voltage_linear_range, + .get_voltage_sel =3D regulator_get_voltage_sel_regmap, + .set_voltage_sel =3D regulator_set_voltage_sel_regmap, + .enable =3D regulator_enable_regmap, + .disable =3D regulator_disable_regmap, + .is_enabled =3D regulator_is_enabled_regmap, + .get_status =3D mcp16502_get_status, + + .set_mode =3D mcp16502_set_mode, + .get_mode =3D mcp16502_get_mode, + +#ifdef CONFIG_SUSPEND + .set_suspend_voltage =3D mcp16502_set_suspend_voltage, + .set_suspend_mode =3D mcp16502_set_suspend_mode, + .set_suspend_enable =3D mcp16502_set_suspend_enable, + .set_suspend_disable =3D mcp16502_set_suspend_disable, +#endif /* CONFIG_SUSPEND */ +}; + +/* + * LDOs cannot change operating modes. + */ +static const struct regulator_ops mcp16502_ldo_ops =3D { + .list_voltage =3D regulator_list_voltage_linear_range, + .map_voltage =3D regulator_map_voltage_linear_range, + .get_voltage_sel =3D regulator_get_voltage_sel_regmap, + .set_voltage_sel =3D regulator_set_voltage_sel_regmap, + .enable =3D regulator_enable_regmap, + .disable =3D regulator_disable_regmap, + .is_enabled =3D regulator_is_enabled_regmap, + .get_status =3D mcp16502_get_status, + +#ifdef CONFIG_SUSPEND + .set_suspend_voltage =3D mcp16502_set_suspend_voltage, + .set_suspend_enable =3D mcp16502_set_suspend_enable, + .set_suspend_disable =3D mcp16502_set_suspend_disable, +#endif /* CONFIG_SUSPEND */ +}; + +static const struct of_device_id mcp16502_ids[] =3D { + { .compatible =3D "microchip,mcp16502", }, + {} +}; +MODULE_DEVICE_TABLE(of, mcp16502_ids); + +static const struct regulator_linear_range b1l12_ranges[] =3D { + REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000), +}; + +static const struct regulator_linear_range b234_ranges[] =3D { + REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000), +}; + +static const struct regulator_desc mcp16502_desc[] =3D { + /* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops) */ + MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops), + MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops), + MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops), + MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops), + MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops), + MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops) +}; + +static const struct regmap_range mcp16502_ranges[] =3D { + regmap_reg_range(MCP16502_MIN_REG, MCP16502_MAX_REG) +}; + +static const struct regmap_access_table mcp16502_yes_reg_table =3D { + .yes_ranges =3D mcp16502_ranges, + .n_yes_ranges =3D ARRAY_SIZE(mcp16502_ranges), +}; + +static const struct regmap_config mcp16502_regmap_config =3D { + .reg_bits =3D 8, + .val_bits =3D 8, + .max_register =3D MCP16502_MAX_REG, + .cache_type =3D REGCACHE_NONE, + .rd_table =3D &mcp16502_yes_reg_table, + .wr_table =3D &mcp16502_yes_reg_table, +}; + +/* + * set_up_regulators() - initialize all regulators + */ +static int setup_regulators(struct mcp16502 *mcp, struct device *dev, + struct regulator_config config) +{ + int i; + + for (i =3D 0; i < NUM_REGULATORS; i++) { + mcp->rdev[i] =3D devm_regulator_register(dev, + &mcp16502_desc[i], + &config); + if (IS_ERR(mcp->rdev[i])) { + dev_err(dev, + "failed to register %s regulator %ld\n", + mcp16502_desc[i].name, PTR_ERR(mcp->rdev[i])); + return PTR_ERR(mcp->rdev[i]); + } + } + + return 0; +} + +static int mcp16502_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regulator_config config =3D { }; + struct device *dev; + struct mcp16502 *mcp; + int ret =3D 0; + + dev =3D &client->dev; + config.dev =3D dev; + + mcp =3D devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL); + if (!mcp) + return -ENOMEM; + + mcp->rmap =3D devm_regmap_init_i2c(client, &mcp16502_regmap_config); + if (IS_ERR(mcp->rmap)) { + ret =3D PTR_ERR(mcp->rmap); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + i2c_set_clientdata(client, mcp); + config.regmap =3D mcp->rmap; + config.driver_data =3D mcp; + + mcp->lpm =3D devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW); + if (IS_ERR(mcp->lpm)) { + dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm)); + return PTR_ERR(mcp->lpm); + } + + ret =3D setup_regulators(mcp, dev, config); + if (ret !=3D 0) + return ret; + + mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE); + + return 0; +} + +#ifdef CONFIG_SUSPEND +static int mcp16502_suspend(struct device *dev) +{ + struct i2c_client *client =3D to_i2c_client(dev); + struct mcp16502 *mcp =3D i2c_get_clientdata(client); + + mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM); + + return 0; +} + +static int mcp16502_resume(struct device *dev) +{ + struct i2c_client *client =3D to_i2c_client(dev); + struct mcp16502 *mcp =3D i2c_get_clientdata(client); + + mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE); + + return 0; +} +#else /* !CONFIG_SUSPEND */ +#define mcp16502_suspend NULL +#define mcp16502_resume NULL +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_PM +static const struct dev_pm_ops mcp16502_pm_ops =3D { + SET_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend, mcp16502_resume) +}; +#endif +static const struct i2c_device_id mcp16502_i2c_id[] =3D { + { "mcp16502", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id); + +static struct i2c_driver mcp16502_drv =3D { + .probe =3D mcp16502_probe, + .driver =3D { + .name =3D "mcp16502-regulator", + .of_match_table =3D of_match_ptr(mcp16502_ids), +#ifdef CONFIG_PM + .pm =3D &mcp16502_pm_ops, +#endif + }, + .id_table =3D mcp16502_i2c_id, +}; + +module_i2c_driver(mcp16502_drv); + +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MCP16502 PMIC driver"); +MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com"); --=20 2.7.4