LKML Archive on lore.kernel.org
 help / color / Atom feed
From: <Claudiu.Beznea@microchip.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <robh+dt@kernel.org>,
	<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<Ludovic.Desroches@microchip.com>, <mark.rutland@arm.com>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<boris.brezillon@bootlin.com>, <Claudiu.Beznea@microchip.com>
Subject: [PATCH v3 5/6] ARM: dts: at91: sama5d2_xplained: Add proper regulator states for suspend-to-mem
Date: Tue, 11 Dec 2018 15:56:54 +0000
Message-ID: <1544543768-2066-6-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1544543768-2066-1-git-send-email-claudiu.beznea@microchip.com>

From: Boris Brezillon <boris.brezillon@bootlin.com>

When entering suspend-to-mem, all PMIC outputs are disabled except
VDDIODDR which is put in power saving mode, and whose voltage is
increased (probably to counter the poor accuracy of power saving mode).

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
[claudiu.beznea@microchip.com: use regulator-changeable-in-suspend,
 regulator-suspend-max-microvolt, regulator-suspend-max-microvolt,
 use macros for regulators' states, add regulator-inital-state]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/boot/dts/at91-sama5d2_xplained.dts | 54 +++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 518e2b095ccf..438e6576cf7c 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -47,6 +47,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
 / {
 	model = "Atmel SAMA5D2 Xplained";
@@ -181,49 +182,102 @@
 							regulator-name = "VDD_1V35";
 							regulator-min-microvolt = <1350000>;
 							regulator-max-microvolt = <1350000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
 							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-on-in-suspend;
+								regulator-suspend-min-microvolt=<1400000>;
+								regulator-suspend-max-microvolt=<1400000>;
+								regulator-changeable-in-suspend;
+								regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							};
 						};
 
 						vdd_1v2_reg: REG_DCDC2 {
 							regulator-name = "VDD_1V2";
 							regulator-min-microvolt = <1100000>;
 							regulator-max-microvolt = <1300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
 							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
 						};
 
 						vdd_3v3_reg: REG_DCDC3 {
 							regulator-name = "VDD_3V3";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
 							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
 						};
 
 						vdd_fuse_reg: REG_LDO1 {
 							regulator-name = "VDD_FUSE";
 							regulator-min-microvolt = <2500000>;
 							regulator-max-microvolt = <2500000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
 							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
 						};
 
 						vdd_3v3_lp_reg: REG_LDO2 {
 							regulator-name = "VDD_3V3_LP";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
 							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
 						};
 
 						vdd_led_reg: REG_LDO3 {
 							regulator-name = "VDD_LED";
 							regulator-min-microvolt = <3300000>;
 							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
 							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
 						};
 
 						vdd_sdhc_1v8_reg: REG_LDO4 {
 							regulator-name = "VDD_SDHC_1V8";
 							regulator-min-microvolt = <1800000>;
 							regulator-max-microvolt = <1800000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
 							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
 						};
 					};
 
-- 
2.7.4


  parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 15:56 [PATCH v3 0/5] add PM functionality for act8945a PMIC Claudiu.Beznea
2018-12-11 15:56 ` [PATCH v3 1/6] regulator: act8945a-regulator: unlock expert registers Claudiu.Beznea
2018-12-11 15:56 ` [PATCH v3 2/6] regulator: act8945a-regulator: Implement PM functionalities Claudiu.Beznea
2018-12-11 15:56 ` [PATCH v3 3/6] regulator: act8945a-regulator: fix line over 80 chars warning Claudiu.Beznea
2018-12-11 15:56 ` [PATCH v3 4/6] regulator: act8945a-regulator: add shutdown function Claudiu.Beznea
2018-12-11 15:56 ` Claudiu.Beznea [this message]
2018-12-11 15:56 ` [PATCH v3 6/6] regulator: add documentation for regulator modes and suspend states Claudiu.Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1544543768-2066-6-git-send-email-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=Ludovic.Desroches@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git