linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sumit Garg <sumit.garg@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, jens.wiklander@linaro.org,
	mpm@selenic.com, herbert@gondor.apana.org.au, robh+dt@kernel.org,
	mark.rutland@arm.com, arnd@arndb.de, gregkh@linuxfoundation.org,
	daniel.thompson@linaro.org, ard.biesheuvel@linaro.org,
	bhsharma@redhat.com, tee-dev@lists.linaro.org,
	Sumit Garg <sumit.garg@linaro.org>
Subject: [PATCH v3 4/4] hwrng: add OP-TEE based rng driver
Date: Fri, 11 Jan 2019 17:17:31 +0530	[thread overview]
Message-ID: <1547207251-9372-5-git-send-email-sumit.garg@linaro.org> (raw)
In-Reply-To: <1547207251-9372-1-git-send-email-sumit.garg@linaro.org>

On ARM SoC's with TrustZone enabled, peripherals like entropy sources
might not be accessible to normal world (linux in this case) and rather
accessible to secure world (OP-TEE in this case) only. So this driver
aims to provides a generic interface to OP-TEE based random number
generator service.

This driver registers on TEE bus to interact with OP-TEE based rng
device/service.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---
 MAINTAINERS                        |   5 +
 drivers/char/hw_random/Kconfig     |  15 ++
 drivers/char/hw_random/Makefile    |   1 +
 drivers/char/hw_random/optee-rng.c | 272 +++++++++++++++++++++++++++++++++++++
 4 files changed, 293 insertions(+)
 create mode 100644 drivers/char/hw_random/optee-rng.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 32d44447..502733c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11260,6 +11260,11 @@ M:	Jens Wiklander <jens.wiklander@linaro.org>
 S:	Maintained
 F:	drivers/tee/optee/
 
+OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
+M:	Sumit Garg <sumit.garg@linaro.org>
+S:	Maintained
+F:	drivers/char/hw_random/optee-rng.c
+
 OPA-VNIC DRIVER
 M:	Dennis Dalessandro <dennis.dalessandro@intel.com>
 M:	Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index dac895d..25a7d8f 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS
 	  will be called exynos-trng.
 
 	  If unsure, say Y.
+
+config HW_RANDOM_OPTEE
+	tristate "OP-TEE based Random Number Generator support"
+	depends on OPTEE
+	default HW_RANDOM
+	help
+	  This  driver provides support for OP-TEE based Random Number
+	  Generator on ARM SoCs where hardware entropy sources are not
+	  accessible to normal world (Linux).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called optee-rng.
+
+	  If unsure, say Y.
+
 endif # HW_RANDOM
 
 config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e35ec3c..7c9ef4a 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
 obj-$(CONFIG_HW_RANDOM_MTK)	+= mtk-rng.o
 obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
 obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
+obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c
new file mode 100644
index 0000000..24f7435
--- /dev/null
+++ b/drivers/char/hw_random/optee-rng.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019 Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/hw_random.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+
+#define DRIVER_NAME "optee-rng"
+
+#define TEE_ERROR_HEALTH_TEST_FAIL	0x00000001
+
+/*
+ * TA_CMD_GET_ENTROPY - Get Entropy from RNG
+ *
+ * param[0] (inout memref) - Entropy buffer memory reference
+ * param[1] unused
+ * param[2] unused
+ * param[3] unused
+ *
+ * Result:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool
+ * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed
+ */
+#define TA_CMD_GET_ENTROPY		0x0
+
+/*
+ * TA_CMD_GET_RNG_INFO - Get RNG information
+ *
+ * param[0] (out value) - value.a: RNG data-rate in bytes per second
+ *                        value.b: Quality/Entropy per 1024 bit of data
+ * param[1] unused
+ * param[2] unused
+ * param[3] unused
+ *
+ * Result:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ */
+#define TA_CMD_GET_RNG_INFO		0x1
+
+#define MAX_ENTROPY_REQ_SZ		(4 * 1024)
+
+static struct tee_context *ctx;
+static struct tee_shm *entropy_shm_pool;
+static u32 ta_rng_data_rate;
+static u32 ta_rng_session_id;
+
+static size_t get_optee_rng_data(void *buf, size_t req_size)
+{
+	u32 ret = 0;
+	u8 *rng_data = NULL;
+	size_t rng_size = 0;
+	struct tee_ioctl_invoke_arg inv_arg = {0};
+	struct tee_param param[4] = {0};
+
+	/* Invoke TA_CMD_GET_ENTROPY function of Trusted App */
+	inv_arg.func = TA_CMD_GET_ENTROPY;
+	inv_arg.session = ta_rng_session_id;
+	inv_arg.num_params = 4;
+
+	/* Fill invoke cmd params */
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+	param[0].u.memref.shm = entropy_shm_pool;
+	param[0].u.memref.size = req_size;
+	param[0].u.memref.shm_offs = 0;
+
+	ret = tee_client_invoke_func(ctx, &inv_arg, param);
+	if ((ret < 0) || (inv_arg.ret != 0)) {
+		pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n",
+		       inv_arg.ret);
+		return 0;
+	}
+
+	rng_data = tee_shm_get_va(entropy_shm_pool, 0);
+	if (IS_ERR(rng_data)) {
+		pr_err("tee_shm_get_va failed\n");
+		return 0;
+	}
+
+	rng_size = param[0].u.memref.size;
+	memcpy(buf, rng_data, rng_size);
+
+	return rng_size;
+}
+
+static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
+{
+	u8 *data = buf;
+	size_t read = 0, rng_size = 0;
+	int timeout = 1;
+
+	if (max > MAX_ENTROPY_REQ_SZ)
+		max = MAX_ENTROPY_REQ_SZ;
+
+	while (read == 0) {
+		rng_size = get_optee_rng_data(data, (max - read));
+
+		data += rng_size;
+		read += rng_size;
+
+		if (wait) {
+			if (timeout-- == 0)
+				return read;
+			msleep((1000 * (max - read)) / ta_rng_data_rate);
+		} else {
+			return read;
+		}
+	}
+
+	return read;
+}
+
+static int optee_rng_init(struct hwrng *rng)
+{
+	entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ,
+					 TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
+	if (IS_ERR(entropy_shm_pool)) {
+		pr_err("tee_shm_alloc failed\n");
+		return PTR_ERR(entropy_shm_pool);
+	}
+
+	return 0;
+}
+
+static void optee_rng_cleanup(struct hwrng *rng)
+{
+	tee_shm_free(entropy_shm_pool);
+}
+
+static struct hwrng optee_rng = {
+	.name		= DRIVER_NAME,
+	.init		= optee_rng_init,
+	.cleanup	= optee_rng_cleanup,
+	.read		= optee_rng_read,
+};
+
+static int get_optee_rng_info(struct device *dev)
+{
+	u32 ret = 0;
+	struct tee_ioctl_invoke_arg inv_arg = {0};
+	struct tee_param param[4] = {0};
+
+	/* Invoke TA_CMD_GET_RNG_INFO function of Trusted App */
+	inv_arg.func = TA_CMD_GET_RNG_INFO;
+	inv_arg.session = ta_rng_session_id;
+	inv_arg.num_params = 4;
+
+	/* Fill invoke cmd params */
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
+
+	ret = tee_client_invoke_func(ctx, &inv_arg, param);
+	if ((ret < 0) || (inv_arg.ret != 0)) {
+		dev_err(dev, "TA_CMD_GET_RNG_INFO invoke func error: %x\n",
+			inv_arg.ret);
+		return -EINVAL;
+	}
+
+	ta_rng_data_rate = param[0].u.value.a;
+	optee_rng.quality = param[0].u.value.b;
+
+	return 0;
+}
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+	if (ver->impl_id == TEE_IMPL_ID_OPTEE)
+		return 1;
+	else
+		return 0;
+}
+
+static int optee_rng_probe(struct device *dev)
+{
+	struct tee_client_device *rng_device = to_tee_client_device(dev);
+	int ret = 0, err = -ENODEV;
+	struct tee_ioctl_open_session_arg sess_arg = {0};
+
+	/* Open context with TEE driver */
+	ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
+	if (IS_ERR(ctx))
+		return -ENODEV;
+
+	/* Open session with hwrng Trusted App */
+	memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
+	sess_arg.num_params = 0;
+
+	ret = tee_client_open_session(ctx, &sess_arg, NULL);
+	if ((ret < 0) || (sess_arg.ret != 0)) {
+		dev_err(dev, "tee_client_open_session failed, error: %x\n",
+			sess_arg.ret);
+		err = -EINVAL;
+		goto out_ctx;
+	}
+	ta_rng_session_id = sess_arg.session;
+
+	err = get_optee_rng_info(dev);
+	if (err)
+		goto out_sess;
+
+	err = hwrng_register(&optee_rng);
+	if (err) {
+		dev_err(dev, "hwrng registration failed (%d)\n", err);
+		goto out_sess;
+	}
+
+	return 0;
+
+out_sess:
+	tee_client_close_session(ctx, ta_rng_session_id);
+out_ctx:
+	tee_client_close_context(ctx);
+
+	return err;
+}
+
+static int optee_rng_remove(struct device *dev)
+{
+	tee_client_close_session(ctx, ta_rng_session_id);
+	tee_client_close_context(ctx);
+	hwrng_unregister(&optee_rng);
+
+	return 0;
+}
+
+const struct tee_client_device_id optee_rng_id_table[] = {
+	{UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f,
+		   0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64)},
+	{}
+};
+
+static struct tee_client_driver optee_rng_driver = {
+	.id_table	= optee_rng_id_table,
+	.driver		= {
+		.name		= DRIVER_NAME,
+		.bus		= &tee_bus_type,
+		.probe		= optee_rng_probe,
+		.remove		= optee_rng_remove,
+	},
+};
+
+static int __init optee_rng_mod_init(void)
+{
+	int rc;
+
+	rc = driver_register(&optee_rng_driver.driver);
+	if (rc)
+		pr_warn("driver registration failed, err: %d", rc);
+
+	return rc;
+}
+
+static void __exit optee_rng_mod_exit(void)
+{
+	driver_unregister(&optee_rng_driver.driver);
+}
+
+module_init(optee_rng_mod_init);
+module_exit(optee_rng_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sumit Garg <sumit.garg@linaro.org>");
+MODULE_DESCRIPTION("OP-TEE based random number generator driver");
-- 
2.7.4


      parent reply	other threads:[~2019-01-11 11:50 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-11 11:47 [PATCH v3 0/4] Introduce TEE bus driver framework Sumit Garg
2019-01-11 11:47 ` [PATCH v3 1/4] tee: add bus driver framework for TEE based devices Sumit Garg
2019-01-11 15:09   ` Bhupesh Sharma
2019-01-15 11:53     ` Sumit Garg
2019-01-11 11:47 ` [PATCH v3 2/4] tee: add supp_nowait flag in tee_context struct Sumit Garg
2019-01-11 11:47 ` [PATCH v3 3/4] tee: optee: add TEE bus device enumeration support Sumit Garg
2019-01-11 11:47 ` Sumit Garg [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1547207251-9372-5-git-send-email-sumit.garg@linaro.org \
    --to=sumit.garg@linaro.org \
    --cc=ard.biesheuvel@linaro.org \
    --cc=arnd@arndb.de \
    --cc=bhsharma@redhat.com \
    --cc=daniel.thompson@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=jens.wiklander@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mpm@selenic.com \
    --cc=robh+dt@kernel.org \
    --cc=tee-dev@lists.linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).