linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ajay Kaher <akaher@vmware.com>
To: <kys@microsoft.com>, <haiyangz@microsoft.com>
Cc: <devel@linuxdriverproject.org>, <linux-pci@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Ajay Kaher <akaher@vmware.com>,
	Long Li <longli@microsoft.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH 1/3] PCI: hv: Allocate physically contiguous hypercall params buffer
Date: Fri, 18 Jan 2019 02:17:16 +0530	[thread overview]
Message-ID: <1547758038-5255-2-git-send-email-akaher@vmware.com> (raw)
In-Reply-To: <1547758038-5255-1-git-send-email-akaher@vmware.com>

hv_do_hypercall() assumes that we pass a segment from a physically
contiguous buffer.  A buffer allocated on the stack may not work if
CONFIG_VMAP_STACK=y is set.

Use kmalloc() to allocate this buffer.

Reported-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Ajay Kaher <akaher@vmware.com>
---
 drivers/pci/host/pci-hyperv.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index b4d8ccf..9e44adf 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -383,6 +383,8 @@ struct hv_pcibus_device {
 	struct msi_domain_info msi_info;
 	struct msi_controller msi_chip;
 	struct irq_domain *irq_domain;
+	struct retarget_msi_interrupt retarget_msi_interrupt_params;
+	spinlock_t retarget_msi_interrupt_lock;
 };
 
 /*
@@ -780,34 +782,40 @@ void hv_irq_unmask(struct irq_data *data)
 {
 	struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
 	struct irq_cfg *cfg = irqd_cfg(data);
-	struct retarget_msi_interrupt params;
+	struct retarget_msi_interrupt *params;
 	struct hv_pcibus_device *hbus;
 	struct cpumask *dest;
 	struct pci_bus *pbus;
 	struct pci_dev *pdev;
 	int cpu;
+	unsigned long flags;
 
 	dest = irq_data_get_affinity_mask(data);
 	pdev = msi_desc_to_pci_dev(msi_desc);
 	pbus = pdev->bus;
 	hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
 
-	memset(&params, 0, sizeof(params));
-	params.partition_id = HV_PARTITION_ID_SELF;
-	params.source = 1; /* MSI(-X) */
-	params.address = msi_desc->msg.address_lo;
-	params.data = msi_desc->msg.data;
-	params.device_id = (hbus->hdev->dev_instance.b[5] << 24) |
+	spin_lock_irqsave(&hbus->retarget_msi_interrupt_lock, flags);
+
+	params = &hbus->retarget_msi_interrupt_params;
+	memset(params, 0, sizeof(*params));
+	params->partition_id = HV_PARTITION_ID_SELF;
+	params->source = 1; /* MSI(-X) */
+	params->address = msi_desc->msg.address_lo;
+	params->data = msi_desc->msg.data;
+	params->device_id = (hbus->hdev->dev_instance.b[5] << 24) |
 			   (hbus->hdev->dev_instance.b[4] << 16) |
 			   (hbus->hdev->dev_instance.b[7] << 8) |
 			   (hbus->hdev->dev_instance.b[6] & 0xf8) |
 			   PCI_FUNC(pdev->devfn);
-	params.vector = cfg->vector;
+	params->vector = cfg->vector;
 
 	for_each_cpu_and(cpu, dest, cpu_online_mask)
-		params.vp_mask |= (1ULL << vmbus_cpu_number_to_vp_number(cpu));
+		params->vp_mask |= (1ULL << vmbus_cpu_number_to_vp_number(cpu));
+
+	hv_do_hypercall(HVCALL_RETARGET_INTERRUPT, params, NULL);
 
-	hv_do_hypercall(HVCALL_RETARGET_INTERRUPT, &params, NULL);
+	spin_unlock_irqrestore(&hbus->retarget_msi_interrupt_lock, flags);
 
 	pci_msi_unmask_irq(data);
 }
@@ -2212,6 +2220,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 	INIT_LIST_HEAD(&hbus->resources_for_children);
 	spin_lock_init(&hbus->config_lock);
 	spin_lock_init(&hbus->device_list_lock);
+	spin_lock_init(&hbus->retarget_msi_interrupt_lock);
 	sema_init(&hbus->enum_sem, 1);
 	init_completion(&hbus->remove_event);
 
-- 
2.7.4


  parent reply	other threads:[~2019-01-17 13:04 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-17 20:47 [PATCH 0/3] PCI: hv: Use vPCI protocol version 1.2 for v4.9 Ajay Kaher
2019-01-17 13:21 ` Greg KH
2019-01-17 20:47 ` Ajay Kaher [this message]
2019-01-17 14:57   ` [PATCH 1/3] PCI: hv: Allocate physically contiguous hypercall params buffer Bjorn Helgaas
2019-01-21 13:19   ` Dan Carpenter
2019-01-21 13:36     ` Dan Carpenter
2019-01-17 20:47 ` [PATCH 2/3] PCI: hv: Add vPCI version protocol negotiation Ajay Kaher
2019-01-17 14:59   ` Bjorn Helgaas
2019-01-17 20:47 ` [PATCH 3/3] PCI: hv: Use vPCI protocol version 1.2 for v4.9 Ajay Kaher
2019-01-17 15:06   ` Bjorn Helgaas
2019-01-18 14:05     ` Ajay Kaher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1547758038-5255-2-git-send-email-akaher@vmware.com \
    --to=akaher@vmware.com \
    --cc=bhelgaas@google.com \
    --cc=devel@linuxdriverproject.org \
    --cc=haiyangz@microsoft.com \
    --cc=kys@microsoft.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=longli@microsoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).