[PATCH v8 0/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI driver

[PATCH v8 0/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI driver

[Mason Yang]

Hi Mark,

v8 patch including:
1) Supported SoC-specific values in DTS.
2) Rename device node name as flash.

v7 patch is according to Geert and Sergei's comments:
1) Add all R-Car Gen3 model in dts.
2) patch rpc-if child node search.
3) minror coding style.

v6 patch is accroding to Geert, Marek and Sergei's comments:
1) spi_controller for new code.
2) "renesas,rcar-gen3-rpc" instead of "renesas,r8a77995-rpc."
3) patch external address read mode w/o u64 readq().
4) patch dts for write buffer & drop "renesas,rpc-mode".
5) coding style and so on.

v5 patch is accroding to Sergei's comments:
1) Read 6 bytes ID from Sergei's patch.
2) regmap_update_bits().
3) C++ style comment.

v4 patch is according to Sergei's comments including:
1) Drop soc_device_match().
2) Drop unused RPC registers.
3) Use ilog2() instead of fls().
4) Patch read 6 bytes ID w/ one command.
5) Coding style and so on.

v3 patch is according to Marek and Geert's comments including:
1) soc_device_mach() to set up RPC_PHYCNT_STRTIM.
2) get_unaligned().
3) rpc-mode for rpi-spi-flash or rpc-hyperflash.
4) coding style and so on.

v2 patch including:
1) remove RPC clock enable/dis-able control,
2) patch run time PM.
3) add RPC module software reset,
4) add regmap.
5) other coding style and so on.

thanks for your review.

best regards,
Mason

Mason Yang (2):
  spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller
    bindings

 .../devicetree/bindings/spi/spi-renesas-rpc.txt    |  40 +
 drivers/spi/Kconfig                                |   6 +
 drivers/spi/Makefile                               |   1 +
 drivers/spi/spi-renesas-rpc.c                      | 804 +++++++++++++++++++++
 4 files changed, 851 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
 create mode 100644 drivers/spi/spi-renesas-rpc.c

-- 
1.9.1

[PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Mason Yang]

Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
 drivers/spi/Kconfig           |   6 +
 drivers/spi/Makefile          |   1 +
 drivers/spi/spi-renesas-rpc.c | 804 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 811 insertions(+)
 create mode 100644 drivers/spi/spi-renesas-rpc.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9f89cb1..6ad1782 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -544,6 +544,12 @@ config SPI_RSPI
 	help
 	  SPI driver for Renesas RSPI and QSPI blocks.
 
+config SPI_RENESAS_RPC
+	tristate "Renesas R-Car Gen3 RPC-IF controller"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  SPI driver for Renesas R-Car Gen3 RPC-IF.
+
 config SPI_QCOM_QSPI
 	tristate "QTI QSPI controller"
 	depends on ARCH_QCOM
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index f296270..9150732 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
 obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
 obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
 obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
+obj-$(CONFIG_SPI_RENESAS_RPC)		+= spi-renesas-rpc.o
 obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
 spi-s3c24xx-hw-y			:= spi-s3c24xx.o
 spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
new file mode 100644
index 0000000..ea12017
--- /dev/null
+++ b/drivers/spi/spi-renesas-rpc.c
@@ -0,0 +1,804 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
+// Copyright (C) 2018 Macronix International Co., Ltd.
+//
+// R-Car Gen3 RPC-IF SPI/QSPI/Octa driver
+//
+// Authors:
+//	Mason Yang <masonccyang@mxic.com.tw>
+//
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include <asm/unaligned.h>
+
+#define RPC_CMNCR		0x0000	// R/W
+#define RPC_CMNCR_MD		BIT(31)
+#define RPC_CMNCR_SFDE		BIT(24) // undocumented bit but must be set
+#define RPC_CMNCR_MOIIO3(val)	(((val) & 0x3) << 22)
+#define RPC_CMNCR_MOIIO2(val)	(((val) & 0x3) << 20)
+#define RPC_CMNCR_MOIIO1(val)	(((val) & 0x3) << 18)
+#define RPC_CMNCR_MOIIO0(val)	(((val) & 0x3) << 16)
+#define RPC_CMNCR_MOIIO_HIZ	(RPC_CMNCR_MOIIO0(3) | RPC_CMNCR_MOIIO1(3) | \
+				 RPC_CMNCR_MOIIO2(3) | RPC_CMNCR_MOIIO3(3))
+#define RPC_CMNCR_IO3FV(val)	(((val) & 0x3) << 14) // undocumented
+#define RPC_CMNCR_IO2FV(val)	(((val) & 0x3) << 12) // undocumented
+#define RPC_CMNCR_IO0FV(val)	(((val) & 0x3) << 8)
+#define RPC_CMNCR_IOFV_HIZ	(RPC_CMNCR_IO0FV(3) | RPC_CMNCR_IO2FV(3) | \
+				 RPC_CMNCR_IO3FV(3))
+#define RPC_CMNCR_BSZ(val)	(((val) & 0x3) << 0)
+
+#define RPC_SSLDR		0x0004	// R/W
+#define RPC_SSLDR_SPNDL(d)	(((d) & 0x7) << 16)
+#define RPC_SSLDR_SLNDL(d)	(((d) & 0x7) << 8)
+#define RPC_SSLDR_SCKDL(d)	(((d) & 0x7) << 0)
+
+#define RPC_DRCR		0x000C	// R/W
+#define RPC_DRCR_SSLN		BIT(24)
+#define RPC_DRCR_RBURST(v)	((((v) - 1) & 0x1F) << 16)
+#define RPC_DRCR_RCF		BIT(9)
+#define RPC_DRCR_RBE		BIT(8)
+#define RPC_DRCR_SSLE		BIT(0)
+
+#define RPC_DRCMR		0x0010	// R/W
+#define RPC_DRCMR_CMD(c)	(((c) & 0xFF) << 16)
+#define RPC_DRCMR_OCMD(c)	(((c) & 0xFF) << 0)
+
+#define RPC_DREAR		0x0014	// R/W
+#define RPC_DREAR_EAC(c)	(((c) & 0x7) << 0)
+
+#define RPC_DROPR		0x0018	// R/W
+
+#define RPC_DRENR		0x001C	// R/W
+#define RPC_DRENR_CDB(o)	(u32)((((o) & 0x3) << 30))
+#define RPC_DRENR_OCDB(o)	(((o) & 0x3) << 28)
+#define RPC_DRENR_ADB(o)	(((o) & 0x3) << 24)
+#define RPC_DRENR_OPDB(o)	(((o) & 0x3) << 20)
+#define RPC_DRENR_DRDB(o)	(((o) & 0x3) << 16)
+#define RPC_DRENR_DME		BIT(15)
+#define RPC_DRENR_CDE		BIT(14)
+#define RPC_DRENR_OCDE		BIT(12)
+#define RPC_DRENR_ADE(v)	(((v) & 0xF) << 8)
+#define RPC_DRENR_OPDE(v)	(((v) & 0xF) << 4)
+
+#define RPC_SMCR		0x0020	// R/W
+#define RPC_SMCR_SSLKP		BIT(8)
+#define RPC_SMCR_SPIRE		BIT(2)
+#define RPC_SMCR_SPIWE		BIT(1)
+#define RPC_SMCR_SPIE		BIT(0)
+
+#define RPC_SMCMR		0x0024	// R/W
+#define RPC_SMCMR_CMD(c)	(((c) & 0xFF) << 16)
+#define RPC_SMCMR_OCMD(c)	(((c) & 0xFF) << 0)
+
+#define RPC_SMADR		0x0028	// R/W
+#define RPC_SMOPR		0x002C	// R/W
+#define RPC_SMOPR_OPD3(o)	(((o) & 0xFF) << 24)
+#define RPC_SMOPR_OPD2(o)	(((o) & 0xFF) << 16)
+#define RPC_SMOPR_OPD1(o)	(((o) & 0xFF) << 8)
+#define RPC_SMOPR_OPD0(o)	(((o) & 0xFF) << 0)
+
+#define RPC_SMENR		0x0030	// R/W
+#define RPC_SMENR_CDB(o)	(((o) & 0x3) << 30)
+#define RPC_SMENR_OCDB(o)	(((o) & 0x3) << 28)
+#define RPC_SMENR_ADB(o)	(((o) & 0x3) << 24)
+#define RPC_SMENR_OPDB(o)	(((o) & 0x3) << 20)
+#define RPC_SMENR_SPIDB(o)	(((o) & 0x3) << 16)
+#define RPC_SMENR_DME		BIT(15)
+#define RPC_SMENR_CDE		BIT(14)
+#define RPC_SMENR_OCDE		BIT(12)
+#define RPC_SMENR_ADE(v)	(((v) & 0xF) << 8)
+#define RPC_SMENR_OPDE(v)	(((v) & 0xF) << 4)
+#define RPC_SMENR_SPIDE(v)	(((v) & 0xF) << 0)
+
+#define RPC_SMRDR0		0x0038	// R
+#define RPC_SMRDR1		0x003C	// R
+#define RPC_SMWDR0		0x0040	// W
+#define RPC_SMWDR1		0x0044	// W
+
+#define RPC_CMNSR		0x0048	// R
+#define RPC_CMNSR_SSLF		BIT(1)
+#define RPC_CMNSR_TEND		BIT(0)
+
+#define RPC_DRDMCR		0x0058	// R/W
+#define RPC_DRDRENR		0x005C	// R/W
+
+#define RPC_SMDMCR		0x0060	// R/W
+#define RPC_SMDMCR_DMCYC(v)	((((v) - 1) & 0x1F) << 0)
+
+#define RPC_SMDRENR		0x0064	// R/W
+#define RPC_SMDRENR_HYPE	(0x7 << 12)
+#define RPC_SMDRENR_ADDRE	BIT(8)
+#define RPC_SMDRENR_OPDRE	BIT(4)
+#define RPC_SMDRENR_SPIDRE	BIT(0)
+
+#define RPC_PHYCNT		0x007C	// R/W
+#define RPC_PHYCNT_CAL		BIT(31)
+#define PRC_PHYCNT_OCTA_AA	BIT(22)
+#define PRC_PHYCNT_OCTA_SA	BIT(23)
+#define PRC_PHYCNT_EXDS		BIT(21)
+#define RPC_PHYCNT_OCT		BIT(20)
+#define RPC_PHYCNT_STRTIM(v)	(((v) & 0x7) << 15)
+#define RPC_PHYCNT_WBUF2	BIT(4)
+#define RPC_PHYCNT_WBUF		BIT(2)
+#define RPC_PHYCNT_PHYMEM(v)	(((v) & 0x3) << 0)
+
+#define RPC_PHYOFFSET1		0x0080	// R/W
+#define RPC_PHYOFFSET1_DDRTMG(v) (((v) & 0x3) << 28)
+#define RPC_PHYOFFSET2		0x0084	// R/W
+#define RPC_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8)
+
+#define RPC_WBUF_SIZE		256	// Write Buffer size
+
+struct rpc_spi {
+	struct clk *clk_rpc;
+	void __iomem *base;
+	void __iomem *dirmap;
+	void __iomem *wbuf;
+	struct regmap *regmap;
+	u32 cur_speed_hz;
+	u32 cmd;
+	u32 addr;
+	u32 dummy;
+	u32 smcr;
+	u32 smenr;
+	u32 xferlen;
+	u32 totalxferlen;
+	enum spi_mem_data_dir xfer_dir;
+	struct reset_control *rstc;
+};
+
+static int rpc_spi_set_freq(struct rpc_spi *rpc, unsigned long freq)
+{
+	int ret;
+
+	if (rpc->cur_speed_hz == freq)
+		return 0;
+
+	ret = clk_set_rate(rpc->clk_rpc, freq);
+	if (ret)
+		return ret;
+
+	rpc->cur_speed_hz = freq;
+	return ret;
+}
+
+static void rpc_spi_hw_init(struct rpc_spi *rpc)
+{
+	//
+	// NOTE: The 0x260 are undocumented bits, but they must be set.
+	//	RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
+	//	0x0 : the delay is biggest,
+	//	0x1 : the delay is 2nd biggest,
+	//	On H3 ES1.x, the value should be 0, while on others,
+	//	the value should be 6.
+	//
+	regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
+				  RPC_PHYCNT_STRTIM(6) | 0x260);
+
+	//
+	// NOTE: The 0x1511144 are undocumented bits, but they must be set
+	//       for RPC_PHYOFFSET1.
+	//	 The 0x31 are undocumented bits, but they must be set
+	//	 for RPC_PHYOFFSET2.
+	//
+	regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
+		     0x1511144);
+	regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
+		     RPC_PHYOFFSET2_OCTTMG(4));
+	regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
+		     RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
+	regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
+		     RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
+		     RPC_CMNCR_BSZ(0));
+}
+
+static int wait_msg_xfer_end(struct rpc_spi *rpc)
+{
+	u32 sts;
+
+	return regmap_read_poll_timeout(rpc->regmap, RPC_CMNSR, sts,
+					sts & RPC_CMNSR_TEND, 0, USEC_PER_SEC);
+}
+
+static u8 rpc_bits_set(u32 nbytes)
+{
+	nbytes = clamp(nbytes, 1U, 4U);
+
+	return GENMASK(3, 4 - nbytes);
+}
+
+static int rpc_spi_io_xfer(struct rpc_spi *rpc,
+			   const void *tx_buf, void *rx_buf)
+{
+	u32 smenr, smcr, data, pos = 0;
+	int ret;
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, RPC_CMNCR_MD);
+	regmap_write(rpc->regmap, RPC_SMDRENR, 0);
+	regmap_write(rpc->regmap, RPC_SMCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_SMDMCR, rpc->dummy);
+	regmap_write(rpc->regmap, RPC_SMADR, rpc->addr);
+	smenr = rpc->smenr;
+
+	if (tx_buf) {
+		while (pos < rpc->xferlen) {
+			u32 nbytes = rpc->xferlen - pos;
+
+			regmap_write(rpc->regmap, RPC_SMWDR0,
+				     get_unaligned((u32 *)(tx_buf + pos)));
+
+			smcr = rpc->smcr | RPC_SMCR_SPIE;
+
+			if (nbytes > 4) {
+				nbytes = 4;
+				smcr |= RPC_SMCR_SSLKP;
+			}
+
+			regmap_write(rpc->regmap, RPC_SMENR, smenr);
+			regmap_write(rpc->regmap, RPC_SMCR, smcr);
+			ret = wait_msg_xfer_end(rpc);
+			if (ret)
+				goto err_out;
+
+			pos += nbytes;
+			smenr = rpc->smenr & ~RPC_SMENR_CDE &
+					     ~RPC_SMENR_ADE(0xf);
+		}
+	} else if (rx_buf) {
+		//
+		// RPC-IF spoils the data for the commands without an address
+		// phase (like RDID) in the manual mode, so we'll have to work
+		// around this issue by using the external address space read
+		// mode instead.
+		//
+		if (!(smenr & RPC_SMENR_ADE(0xf))) {
+			regmap_update_bits(rpc->regmap, RPC_CMNCR,
+					   RPC_CMNCR_MD, 0);
+			regmap_write(rpc->regmap, RPC_DRCR,
+				     RPC_DRCR_RBURST(32) | RPC_DRCR_RBE);
+			regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
+			regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
+			regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
+			regmap_write(rpc->regmap, RPC_DROPR, 0);
+			regmap_write(rpc->regmap, RPC_DRENR, smenr);
+			memcpy_fromio(rx_buf, rpc->dirmap, rpc->xferlen);
+			regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RCF);
+		} else {
+			while (pos < rpc->xferlen) {
+				u32 nbytes = rpc->xferlen - pos;
+
+				if (nbytes > 4)
+					nbytes = 4;
+
+				regmap_write(rpc->regmap, RPC_SMENR, smenr);
+				regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr |
+					     RPC_SMCR_SPIE);
+				ret = wait_msg_xfer_end(rpc);
+				if (ret)
+					goto err_out;
+
+				regmap_read(rpc->regmap, RPC_SMRDR0, &data);
+				memcpy(rx_buf + pos, &data, nbytes);
+				pos += nbytes;
+
+				regmap_write(rpc->regmap, RPC_SMADR,
+					     rpc->addr + pos);
+			}
+		}
+	} else {
+		regmap_write(rpc->regmap, RPC_SMENR, rpc->smenr);
+		regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr | RPC_SMCR_SPIE);
+		ret = wait_msg_xfer_end(rpc);
+		if (ret)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	return reset_control_reset(rpc->rstc);
+}
+
+static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
+					const struct spi_mem_op *op,
+					u64 *offs, size_t *len)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
+
+	rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
+	rpc->smenr = RPC_SMENR_CDE |
+		     RPC_SMENR_CDB(ilog2(op->cmd.buswidth));
+	rpc->totalxferlen = 1;
+	rpc->xfer_dir = SPI_MEM_NO_DATA;
+	rpc->xferlen = 0;
+	rpc->addr = 0;
+
+	if (op->addr.nbytes) {
+		rpc->smenr |= RPC_SMENR_ADB(ilog2(op->addr.buswidth));
+		if (op->addr.nbytes == 4)
+			rpc->smenr |= RPC_SMENR_ADE(0xf);
+		else
+			rpc->smenr |= RPC_SMENR_ADE(0x7);
+
+		if (offs && len)
+			rpc->addr = *offs;
+		else
+			rpc->addr = op->addr.val;
+		rpc->totalxferlen += op->addr.nbytes;
+	}
+
+	if (op->dummy.nbytes) {
+		rpc->smenr |= RPC_SMENR_DME;
+		rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
+		rpc->totalxferlen += op->dummy.nbytes;
+	}
+
+	if (op->data.nbytes || (offs && len)) {
+		switch (op->data.dir) {
+		case SPI_MEM_DATA_IN:
+			rpc->smcr = RPC_SMCR_SPIRE;
+			rpc->xfer_dir = SPI_MEM_DATA_IN;
+			break;
+		case SPI_MEM_DATA_OUT:
+			rpc->smcr = RPC_SMCR_SPIWE;
+			rpc->xfer_dir = SPI_MEM_DATA_OUT;
+			break;
+		default:
+			break;
+		}
+
+		if (offs && len) {
+			rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_set(*len)) |
+				      RPC_SMENR_SPIDB(ilog2(op->data.buswidth));
+			rpc->xferlen = *len;
+			rpc->totalxferlen += *len;
+		} else {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(op->data.nbytes)) |
+				RPC_SMENR_SPIDB(ilog2(op->data.buswidth));
+			rpc->xferlen = op->data.nbytes;
+			rpc->totalxferlen += op->data.nbytes;
+		}
+	}
+}
+
+static bool rpc_spi_mem_supports_op(struct spi_mem *mem,
+				    const struct spi_mem_op *op)
+{
+	if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
+	    op->dummy.buswidth > 4 || op->cmd.buswidth > 4 ||
+	    op->addr.nbytes > 4)
+		return false;
+
+	return true;
+}
+
+static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+				       u64 offs, size_t len, void *buf)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+	int ret;
+
+	if (offs + desc->info.offset + len > U32_MAX)
+		return -EINVAL;
+
+	if (len > 0x4000000)
+		len = 0x4000000;
+
+	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
+				    &desc->info.op_tmpl, &offs, &len);
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
+	regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
+		     RPC_DRCR_RBE);
+
+	regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
+	regmap_write(rpc->regmap, RPC_DROPR, 0);
+	regmap_write(rpc->regmap, RPC_DRENR, rpc->smenr);
+	regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
+	regmap_write(rpc->regmap, RPC_DRDRENR, 0);
+
+	memcpy_fromio(buf, rpc->dirmap + desc->info.offset + offs, len);
+
+	return len;
+}
+
+static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+					u64 offs, size_t len, const void *buf)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+	int ret;
+
+	if (offs + desc->info.offset + len > U32_MAX)
+		return -EINVAL;
+
+	if (len > RPC_WBUF_SIZE)
+		len = RPC_WBUF_SIZE;
+
+	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
+				    &desc->info.op_tmpl, &offs, &len);
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, RPC_CMNCR_MD);
+
+	regmap_write(rpc->regmap, RPC_SMDRENR, 0);
+
+	regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
+
+	memcpy_toio(rpc->wbuf, buf, len);
+
+	regmap_write(rpc->regmap, RPC_SMCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_SMADR, offs);
+	regmap_write(rpc->regmap, RPC_SMENR, rpc->smenr);
+	regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr | RPC_SMCR_SPIE);
+	ret = wait_msg_xfer_end(rpc);
+	if (ret)
+		goto err_out;
+
+	regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RCF);
+
+	regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
+			   RPC_PHYCNT_STRTIM(6));
+
+	return len;
+
+err_out:
+	return reset_control_reset(rpc->rstc);
+}
+
+static int rpc_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+
+	if (desc->info.offset + desc->info.length > U32_MAX)
+		return -ENOTSUPP;
+
+	if (!rpc_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+		return -ENOTSUPP;
+
+	if (!rpc->dirmap &&
+	    desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN)
+		return -ENOTSUPP;
+
+	if (!rpc->wbuf &&
+	    desc->info.op_tmpl.data.dir == SPI_MEM_DATA_OUT)
+		return -ENOTSUPP;
+
+	return 0;
+}
+
+static int rpc_spi_mem_exec_op(struct spi_mem *mem,
+			       const struct spi_mem_op *op)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(mem->spi->controller);
+	int ret;
+
+	ret = rpc_spi_set_freq(rpc, mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(mem->spi, op, NULL, NULL);
+
+	ret = rpc_spi_io_xfer(rpc,
+			      op->data.dir == SPI_MEM_DATA_OUT ?
+			      op->data.buf.out : NULL,
+			      op->data.dir == SPI_MEM_DATA_IN ?
+			      op->data.buf.in : NULL);
+
+	return ret;
+}
+
+static const struct spi_controller_mem_ops rpc_spi_mem_ops = {
+	.supports_op = rpc_spi_mem_supports_op,
+	.exec_op = rpc_spi_mem_exec_op,
+	.dirmap_create = rpc_spi_mem_dirmap_create,
+	.dirmap_read = rpc_spi_mem_dirmap_read,
+	.dirmap_write = rpc_spi_mem_dirmap_write,
+};
+
+static void rpc_spi_transfer_setup(struct rpc_spi *rpc,
+				   struct spi_message *msg)
+{
+	struct spi_transfer *t, xfer[4] = { };
+	u32 i, xfercnt, xferpos = 0;
+
+	rpc->totalxferlen = 0;
+	rpc->xfer_dir = SPI_MEM_NO_DATA;
+
+	list_for_each_entry(t, &msg->transfers, transfer_list) {
+		if (t->tx_buf) {
+			xfer[xferpos].tx_buf = t->tx_buf;
+			xfer[xferpos].tx_nbits = t->tx_nbits;
+		}
+
+		if (t->rx_buf) {
+			xfer[xferpos].rx_buf = t->rx_buf;
+			xfer[xferpos].rx_nbits = t->rx_nbits;
+		}
+
+		if (t->len) {
+			xfer[xferpos++].len = t->len;
+			rpc->totalxferlen += t->len;
+		}
+
+		if (list_is_last(&t->transfer_list, &msg->transfers)) {
+			if (xferpos > 1) {
+				if (t->rx_buf) {
+					rpc->xfer_dir = SPI_MEM_DATA_IN;
+					rpc->smcr = RPC_SMCR_SPIRE;
+				} else if (t->tx_buf) {
+					rpc->xfer_dir = SPI_MEM_DATA_OUT;
+					rpc->smcr = RPC_SMCR_SPIWE;
+				}
+			}
+		}
+	}
+
+	xfercnt = xferpos;
+	rpc->xferlen = xfer[--xferpos].len;
+	rpc->cmd = RPC_SMCMR_CMD(((u8 *)xfer[0].tx_buf)[0]);
+	rpc->smenr = RPC_SMENR_CDE |
+		     RPC_SMENR_CDB(ilog2((unsigned int)xfer[0].tx_nbits));
+	rpc->addr = 0;
+
+	if (xfercnt > 2 && xfer[1].len && xfer[1].tx_buf) {
+		rpc->smenr |=
+			RPC_SMENR_ADB(ilog2((unsigned int)xfer[1].tx_nbits));
+
+		for (i = 0; i < xfer[1].len; i++)
+			rpc->addr |= ((u8 *)xfer[1].tx_buf)[i] <<
+				     (8 * (xfer[1].len - i - 1));
+
+		if (xfer[1].len == 4)
+			rpc->smenr |= RPC_SMENR_ADE(0xf);
+		else
+			rpc->smenr |= RPC_SMENR_ADE(0x7);
+	}
+
+	if (xfercnt > 3 && xfer[2].len && xfer[2].tx_buf) {
+		rpc->smenr |= RPC_SMENR_DME;
+		rpc->dummy = RPC_SMDMCR_DMCYC(xfer[2].len);
+	}
+
+	for (i = xfercnt - 1; i < xfercnt && xfercnt > 1; i++) {
+		if (xfer[i].rx_buf) {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(xfer[i].len)) |
+				RPC_SMENR_SPIDB(ilog2
+					((unsigned int)xfer[i].rx_nbits));
+		} else if (xfer[i].tx_buf) {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(xfer[i].len)) |
+				RPC_SMENR_SPIDB(ilog2
+					((unsigned int)xfer[i].tx_nbits));
+		}
+	}
+}
+
+static inline int rpc_spi_xfer_message(struct rpc_spi *rpc,
+				       struct spi_transfer *data_xfer)
+{
+	int ret;
+
+	ret = rpc_spi_set_freq(rpc, data_xfer->speed_hz);
+	if (ret)
+		return ret;
+
+	ret = rpc_spi_io_xfer(rpc,
+			      rpc->xfer_dir == SPI_MEM_DATA_OUT ?
+			      data_xfer->tx_buf : NULL,
+			      rpc->xfer_dir == SPI_MEM_DATA_IN ?
+			      data_xfer->rx_buf : NULL);
+
+	return ret;
+}
+
+static int rpc_spi_transfer_one_message(struct spi_controller *ctlr,
+					struct spi_message *msg)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(ctlr);
+	struct spi_transfer *data_xfer;
+	int ret;
+
+	rpc_spi_transfer_setup(rpc, msg);
+
+	data_xfer = list_last_entry(&msg->transfers, struct spi_transfer,
+				    transfer_list);
+
+	ret = rpc_spi_xfer_message(rpc, data_xfer);
+	if (ret)
+		goto out;
+
+	msg->status = 0;
+	msg->actual_length = rpc->totalxferlen;
+out:
+	spi_finalize_current_message(ctlr);
+	return 0;
+}
+
+static const struct regmap_range rpc_spi_volatile_ranges[] = {
+	regmap_reg_range(RPC_SMRDR0, RPC_SMRDR0),
+	regmap_reg_range(RPC_SMWDR0, RPC_SMWDR0),
+	regmap_reg_range(RPC_CMNSR, RPC_CMNSR),
+};
+
+static const struct regmap_access_table rpc_spi_volatile_table = {
+	.yes_ranges	= rpc_spi_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(rpc_spi_volatile_ranges),
+};
+
+static const struct regmap_config rpc_spi_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.fast_io = true,
+	.max_register = RPC_PHYOFFSET2,
+	.volatile_table = &rpc_spi_volatile_table,
+};
+
+static int rpc_spi_probe(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr;
+	struct resource *res;
+	struct rpc_spi *rpc;
+	struct device_node *flash;
+	int ret;
+
+	flash = of_get_next_child(pdev->dev.of_node, NULL);
+	if (!flash) {
+		dev_warn(&pdev->dev, "no flash node found\n");
+		return -ENODEV;
+	}
+
+	ret = of_device_is_compatible(flash, "jedec,spi-nor");
+	if (!ret) {
+		dev_warn(&pdev->dev, "no spi-nor device found\n");
+		return -ENODEV;
+	}
+
+	ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
+	if (!ctlr)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ctlr);
+
+	rpc = spi_controller_get_devdata(ctlr);
+
+	ctlr->dev.of_node = pdev->dev.of_node;
+
+	rpc->clk_rpc = devm_clk_get(&pdev->dev, "rpc");
+	if (IS_ERR(rpc->clk_rpc))
+		return PTR_ERR(rpc->clk_rpc);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	rpc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rpc->base))
+		return PTR_ERR(rpc->base);
+
+	rpc->regmap = devm_regmap_init_mmio(&pdev->dev, rpc->base,
+					    &rpc_spi_regmap_config);
+	if (IS_ERR(rpc->regmap)) {
+		dev_err(&pdev->dev,
+			"failed to init regmap for rpc-spi, error %ld\n",
+			PTR_ERR(rpc->regmap));
+		return PTR_ERR(rpc->regmap);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
+	rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rpc->dirmap))
+		rpc->dirmap = NULL;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wbuf");
+	rpc->wbuf = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rpc->wbuf))
+		rpc->wbuf = NULL;
+
+	rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rpc->rstc))
+		return PTR_ERR(rpc->rstc);
+
+	pm_runtime_enable(&pdev->dev);
+	ctlr->auto_runtime_pm = true;
+
+	ctlr->num_chipselect = 1;
+	ctlr->mem_ops = &rpc_spi_mem_ops;
+	ctlr->transfer_one_message = rpc_spi_transfer_one_message;
+
+	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD;
+
+	rpc_spi_hw_init(rpc);
+
+	ret = spi_register_controller(ctlr);
+	if (ret) {
+		dev_err(&pdev->dev, "spi_register_controller failed\n");
+		goto err_put_ctlr;
+	}
+	return 0;
+
+err_put_ctlr:
+	spi_controller_put(ctlr);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int rpc_spi_remove(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	spi_unregister_controller(ctlr);
+
+	return 0;
+}
+
+static const struct of_device_id rpc_spi_of_ids[] = {
+	{ .compatible = "renesas,rcar-gen3-rpc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rpc_spi_of_ids);
+
+#ifdef CONFIG_PM_SLEEP
+static int rpc_spi_suspend(struct device *dev)
+{
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+	return spi_controller_suspend(ctlr);
+}
+
+static int rpc_spi_resume(struct device *dev)
+{
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+	return spi_controller_resume(ctlr);
+}
+
+static SIMPLE_DEV_PM_OPS(rpc_spi_pm_ops, rpc_spi_suspend, rpc_spi_resume);
+#define DEV_PM_OPS	(&rpc_spi_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver rpc_spi_driver = {
+	.probe = rpc_spi_probe,
+	.remove = rpc_spi_remove,
+	.driver = {
+		.name = "rpc-spi",
+		.of_match_table = rpc_spi_of_ids,
+		.pm = DEV_PM_OPS,
+	},
+};
+module_platform_driver(rpc_spi_driver);
+
+MODULE_AUTHOR("Mason Yang <masonccyang@mxic.com.tw>");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 RPC-IF SPI controller driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

[PATCH v8 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings

[Mason Yang]

Document the bindings used by the Renesas R-Car Gen3 RPC-IF controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
---
 .../devicetree/bindings/spi/spi-renesas-rpc.txt    | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
new file mode 100644
index 0000000..7dff7e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
@@ -0,0 +1,40 @@
+Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings
+--------------------------------------------------------------------
+
+Required properties:
+- compatible: should be an SoC-specific compatible value, followed by
+		"renesas,rcar-gen3-rpc" as a fallback.
+		supported SoC-specific values are:
+		"renesas,r8a77995-rpc"	(R-Car D3)
+- reg: should contain three register areas:
+	first for the base address of rpc-if registers,
+	second for the direct mapping read mode and
+	third for the write buffer area.
+- reg-names: should contain "regs", "dirmap" and "wbuf"
+- clocks: should contain 1 entries for the module's clock
+- clock-names: should contain "rpc"
+- #address-cells: should be 1
+- #size-cells: should be 0
+
+Example:
+
+	rpc: rpc@ee200000 {
+		compatible = "renesas,r8a77995-rpc", "renesas,rcar-gen3-rpc";
+		reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x4000000>,
+		      <0 0xee208000 0 0x100>;
+		reg-names = "regs", "dirmap", "wbuf";
+		clocks = <&cpg CPG_MOD 917>;
+		clock-names = "rpc";
+		power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		resets = <&cpg 917>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			spi-tx-bus-width = <1>;
+			spi-rx-bus-width = <1>;
+		};
+	};
-- 
1.9.1

Applied "dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings" to the spi tree

[Mark Brown]

The patch

   dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 06938aef3e9f33760ea384dc74c0f16d6b98b5a0 Mon Sep 17 00:00:00 2001
From: Mason Yang <masonccyang@mxic.com.tw>
Date: Mon, 28 Jan 2019 14:49:18 +0800
Subject: [PATCH] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF
 controller bindings

Document the bindings used by the Renesas R-Car Gen3 RPC-IF controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 .../bindings/spi/spi-renesas-rpc.txt          | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
new file mode 100644
index 000000000000..7dff7e7bea97
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
@@ -0,0 +1,40 @@
+Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings
+--------------------------------------------------------------------
+
+Required properties:
+- compatible: should be an SoC-specific compatible value, followed by
+		"renesas,rcar-gen3-rpc" as a fallback.
+		supported SoC-specific values are:
+		"renesas,r8a77995-rpc"	(R-Car D3)
+- reg: should contain three register areas:
+	first for the base address of rpc-if registers,
+	second for the direct mapping read mode and
+	third for the write buffer area.
+- reg-names: should contain "regs", "dirmap" and "wbuf"
+- clocks: should contain 1 entries for the module's clock
+- clock-names: should contain "rpc"
+- #address-cells: should be 1
+- #size-cells: should be 0
+
+Example:
+
+	rpc: rpc@ee200000 {
+		compatible = "renesas,r8a77995-rpc", "renesas,rcar-gen3-rpc";
+		reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x4000000>,
+		      <0 0xee208000 0 0x100>;
+		reg-names = "regs", "dirmap", "wbuf";
+		clocks = <&cpg CPG_MOD 917>;
+		clock-names = "rpc";
+		power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		resets = <&cpg 917>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			spi-tx-bus-width = <1>;
+			spi-rx-bus-width = <1>;
+		};
+	};
-- 
2.20.1

Applied "spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver" to the spi tree

[Mark Brown]

The patch

   spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 94468990612b8482e7403a80777ad6abfe3d9f8f Mon Sep 17 00:00:00 2001
From: Mason Yang <masonccyang@mxic.com.tw>
Date: Mon, 28 Jan 2019 14:49:17 +0800
Subject: [PATCH] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/Kconfig           |   6 +
 drivers/spi/Makefile          |   1 +
 drivers/spi/spi-renesas-rpc.c | 804 ++++++++++++++++++++++++++++++++++
 3 files changed, 811 insertions(+)
 create mode 100644 drivers/spi/spi-renesas-rpc.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 17d79b91d7a8..62bee8070499 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -564,6 +564,12 @@ config SPI_RSPI
 	help
 	  SPI driver for Renesas RSPI and QSPI blocks.
 
+config SPI_RENESAS_RPC
+	tristate "Renesas R-Car Gen3 RPC-IF controller"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  SPI driver for Renesas R-Car Gen3 RPC-IF.
+
 config SPI_QCOM_QSPI
 	tristate "QTI QSPI controller"
 	depends on ARCH_QCOM
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5c5af4676279..ba90f718effe 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -86,6 +86,7 @@ obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
 obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
 obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
 obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
+obj-$(CONFIG_SPI_RENESAS_RPC)		+= spi-renesas-rpc.o
 obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
 spi-s3c24xx-hw-y			:= spi-s3c24xx.o
 spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
new file mode 100644
index 000000000000..ea120175ec82
--- /dev/null
+++ b/drivers/spi/spi-renesas-rpc.c
@@ -0,0 +1,804 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
+// Copyright (C) 2018 Macronix International Co., Ltd.
+//
+// R-Car Gen3 RPC-IF SPI/QSPI/Octa driver
+//
+// Authors:
+//	Mason Yang <masonccyang@mxic.com.tw>
+//
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include <asm/unaligned.h>
+
+#define RPC_CMNCR		0x0000	// R/W
+#define RPC_CMNCR_MD		BIT(31)
+#define RPC_CMNCR_SFDE		BIT(24) // undocumented bit but must be set
+#define RPC_CMNCR_MOIIO3(val)	(((val) & 0x3) << 22)
+#define RPC_CMNCR_MOIIO2(val)	(((val) & 0x3) << 20)
+#define RPC_CMNCR_MOIIO1(val)	(((val) & 0x3) << 18)
+#define RPC_CMNCR_MOIIO0(val)	(((val) & 0x3) << 16)
+#define RPC_CMNCR_MOIIO_HIZ	(RPC_CMNCR_MOIIO0(3) | RPC_CMNCR_MOIIO1(3) | \
+				 RPC_CMNCR_MOIIO2(3) | RPC_CMNCR_MOIIO3(3))
+#define RPC_CMNCR_IO3FV(val)	(((val) & 0x3) << 14) // undocumented
+#define RPC_CMNCR_IO2FV(val)	(((val) & 0x3) << 12) // undocumented
+#define RPC_CMNCR_IO0FV(val)	(((val) & 0x3) << 8)
+#define RPC_CMNCR_IOFV_HIZ	(RPC_CMNCR_IO0FV(3) | RPC_CMNCR_IO2FV(3) | \
+				 RPC_CMNCR_IO3FV(3))
+#define RPC_CMNCR_BSZ(val)	(((val) & 0x3) << 0)
+
+#define RPC_SSLDR		0x0004	// R/W
+#define RPC_SSLDR_SPNDL(d)	(((d) & 0x7) << 16)
+#define RPC_SSLDR_SLNDL(d)	(((d) & 0x7) << 8)
+#define RPC_SSLDR_SCKDL(d)	(((d) & 0x7) << 0)
+
+#define RPC_DRCR		0x000C	// R/W
+#define RPC_DRCR_SSLN		BIT(24)
+#define RPC_DRCR_RBURST(v)	((((v) - 1) & 0x1F) << 16)
+#define RPC_DRCR_RCF		BIT(9)
+#define RPC_DRCR_RBE		BIT(8)
+#define RPC_DRCR_SSLE		BIT(0)
+
+#define RPC_DRCMR		0x0010	// R/W
+#define RPC_DRCMR_CMD(c)	(((c) & 0xFF) << 16)
+#define RPC_DRCMR_OCMD(c)	(((c) & 0xFF) << 0)
+
+#define RPC_DREAR		0x0014	// R/W
+#define RPC_DREAR_EAC(c)	(((c) & 0x7) << 0)
+
+#define RPC_DROPR		0x0018	// R/W
+
+#define RPC_DRENR		0x001C	// R/W
+#define RPC_DRENR_CDB(o)	(u32)((((o) & 0x3) << 30))
+#define RPC_DRENR_OCDB(o)	(((o) & 0x3) << 28)
+#define RPC_DRENR_ADB(o)	(((o) & 0x3) << 24)
+#define RPC_DRENR_OPDB(o)	(((o) & 0x3) << 20)
+#define RPC_DRENR_DRDB(o)	(((o) & 0x3) << 16)
+#define RPC_DRENR_DME		BIT(15)
+#define RPC_DRENR_CDE		BIT(14)
+#define RPC_DRENR_OCDE		BIT(12)
+#define RPC_DRENR_ADE(v)	(((v) & 0xF) << 8)
+#define RPC_DRENR_OPDE(v)	(((v) & 0xF) << 4)
+
+#define RPC_SMCR		0x0020	// R/W
+#define RPC_SMCR_SSLKP		BIT(8)
+#define RPC_SMCR_SPIRE		BIT(2)
+#define RPC_SMCR_SPIWE		BIT(1)
+#define RPC_SMCR_SPIE		BIT(0)
+
+#define RPC_SMCMR		0x0024	// R/W
+#define RPC_SMCMR_CMD(c)	(((c) & 0xFF) << 16)
+#define RPC_SMCMR_OCMD(c)	(((c) & 0xFF) << 0)
+
+#define RPC_SMADR		0x0028	// R/W
+#define RPC_SMOPR		0x002C	// R/W
+#define RPC_SMOPR_OPD3(o)	(((o) & 0xFF) << 24)
+#define RPC_SMOPR_OPD2(o)	(((o) & 0xFF) << 16)
+#define RPC_SMOPR_OPD1(o)	(((o) & 0xFF) << 8)
+#define RPC_SMOPR_OPD0(o)	(((o) & 0xFF) << 0)
+
+#define RPC_SMENR		0x0030	// R/W
+#define RPC_SMENR_CDB(o)	(((o) & 0x3) << 30)
+#define RPC_SMENR_OCDB(o)	(((o) & 0x3) << 28)
+#define RPC_SMENR_ADB(o)	(((o) & 0x3) << 24)
+#define RPC_SMENR_OPDB(o)	(((o) & 0x3) << 20)
+#define RPC_SMENR_SPIDB(o)	(((o) & 0x3) << 16)
+#define RPC_SMENR_DME		BIT(15)
+#define RPC_SMENR_CDE		BIT(14)
+#define RPC_SMENR_OCDE		BIT(12)
+#define RPC_SMENR_ADE(v)	(((v) & 0xF) << 8)
+#define RPC_SMENR_OPDE(v)	(((v) & 0xF) << 4)
+#define RPC_SMENR_SPIDE(v)	(((v) & 0xF) << 0)
+
+#define RPC_SMRDR0		0x0038	// R
+#define RPC_SMRDR1		0x003C	// R
+#define RPC_SMWDR0		0x0040	// W
+#define RPC_SMWDR1		0x0044	// W
+
+#define RPC_CMNSR		0x0048	// R
+#define RPC_CMNSR_SSLF		BIT(1)
+#define RPC_CMNSR_TEND		BIT(0)
+
+#define RPC_DRDMCR		0x0058	// R/W
+#define RPC_DRDRENR		0x005C	// R/W
+
+#define RPC_SMDMCR		0x0060	// R/W
+#define RPC_SMDMCR_DMCYC(v)	((((v) - 1) & 0x1F) << 0)
+
+#define RPC_SMDRENR		0x0064	// R/W
+#define RPC_SMDRENR_HYPE	(0x7 << 12)
+#define RPC_SMDRENR_ADDRE	BIT(8)
+#define RPC_SMDRENR_OPDRE	BIT(4)
+#define RPC_SMDRENR_SPIDRE	BIT(0)
+
+#define RPC_PHYCNT		0x007C	// R/W
+#define RPC_PHYCNT_CAL		BIT(31)
+#define PRC_PHYCNT_OCTA_AA	BIT(22)
+#define PRC_PHYCNT_OCTA_SA	BIT(23)
+#define PRC_PHYCNT_EXDS		BIT(21)
+#define RPC_PHYCNT_OCT		BIT(20)
+#define RPC_PHYCNT_STRTIM(v)	(((v) & 0x7) << 15)
+#define RPC_PHYCNT_WBUF2	BIT(4)
+#define RPC_PHYCNT_WBUF		BIT(2)
+#define RPC_PHYCNT_PHYMEM(v)	(((v) & 0x3) << 0)
+
+#define RPC_PHYOFFSET1		0x0080	// R/W
+#define RPC_PHYOFFSET1_DDRTMG(v) (((v) & 0x3) << 28)
+#define RPC_PHYOFFSET2		0x0084	// R/W
+#define RPC_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8)
+
+#define RPC_WBUF_SIZE		256	// Write Buffer size
+
+struct rpc_spi {
+	struct clk *clk_rpc;
+	void __iomem *base;
+	void __iomem *dirmap;
+	void __iomem *wbuf;
+	struct regmap *regmap;
+	u32 cur_speed_hz;
+	u32 cmd;
+	u32 addr;
+	u32 dummy;
+	u32 smcr;
+	u32 smenr;
+	u32 xferlen;
+	u32 totalxferlen;
+	enum spi_mem_data_dir xfer_dir;
+	struct reset_control *rstc;
+};
+
+static int rpc_spi_set_freq(struct rpc_spi *rpc, unsigned long freq)
+{
+	int ret;
+
+	if (rpc->cur_speed_hz == freq)
+		return 0;
+
+	ret = clk_set_rate(rpc->clk_rpc, freq);
+	if (ret)
+		return ret;
+
+	rpc->cur_speed_hz = freq;
+	return ret;
+}
+
+static void rpc_spi_hw_init(struct rpc_spi *rpc)
+{
+	//
+	// NOTE: The 0x260 are undocumented bits, but they must be set.
+	//	RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
+	//	0x0 : the delay is biggest,
+	//	0x1 : the delay is 2nd biggest,
+	//	On H3 ES1.x, the value should be 0, while on others,
+	//	the value should be 6.
+	//
+	regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
+				  RPC_PHYCNT_STRTIM(6) | 0x260);
+
+	//
+	// NOTE: The 0x1511144 are undocumented bits, but they must be set
+	//       for RPC_PHYOFFSET1.
+	//	 The 0x31 are undocumented bits, but they must be set
+	//	 for RPC_PHYOFFSET2.
+	//
+	regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
+		     0x1511144);
+	regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
+		     RPC_PHYOFFSET2_OCTTMG(4));
+	regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
+		     RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
+	regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
+		     RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
+		     RPC_CMNCR_BSZ(0));
+}
+
+static int wait_msg_xfer_end(struct rpc_spi *rpc)
+{
+	u32 sts;
+
+	return regmap_read_poll_timeout(rpc->regmap, RPC_CMNSR, sts,
+					sts & RPC_CMNSR_TEND, 0, USEC_PER_SEC);
+}
+
+static u8 rpc_bits_set(u32 nbytes)
+{
+	nbytes = clamp(nbytes, 1U, 4U);
+
+	return GENMASK(3, 4 - nbytes);
+}
+
+static int rpc_spi_io_xfer(struct rpc_spi *rpc,
+			   const void *tx_buf, void *rx_buf)
+{
+	u32 smenr, smcr, data, pos = 0;
+	int ret;
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, RPC_CMNCR_MD);
+	regmap_write(rpc->regmap, RPC_SMDRENR, 0);
+	regmap_write(rpc->regmap, RPC_SMCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_SMDMCR, rpc->dummy);
+	regmap_write(rpc->regmap, RPC_SMADR, rpc->addr);
+	smenr = rpc->smenr;
+
+	if (tx_buf) {
+		while (pos < rpc->xferlen) {
+			u32 nbytes = rpc->xferlen - pos;
+
+			regmap_write(rpc->regmap, RPC_SMWDR0,
+				     get_unaligned((u32 *)(tx_buf + pos)));
+
+			smcr = rpc->smcr | RPC_SMCR_SPIE;
+
+			if (nbytes > 4) {
+				nbytes = 4;
+				smcr |= RPC_SMCR_SSLKP;
+			}
+
+			regmap_write(rpc->regmap, RPC_SMENR, smenr);
+			regmap_write(rpc->regmap, RPC_SMCR, smcr);
+			ret = wait_msg_xfer_end(rpc);
+			if (ret)
+				goto err_out;
+
+			pos += nbytes;
+			smenr = rpc->smenr & ~RPC_SMENR_CDE &
+					     ~RPC_SMENR_ADE(0xf);
+		}
+	} else if (rx_buf) {
+		//
+		// RPC-IF spoils the data for the commands without an address
+		// phase (like RDID) in the manual mode, so we'll have to work
+		// around this issue by using the external address space read
+		// mode instead.
+		//
+		if (!(smenr & RPC_SMENR_ADE(0xf))) {
+			regmap_update_bits(rpc->regmap, RPC_CMNCR,
+					   RPC_CMNCR_MD, 0);
+			regmap_write(rpc->regmap, RPC_DRCR,
+				     RPC_DRCR_RBURST(32) | RPC_DRCR_RBE);
+			regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
+			regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
+			regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
+			regmap_write(rpc->regmap, RPC_DROPR, 0);
+			regmap_write(rpc->regmap, RPC_DRENR, smenr);
+			memcpy_fromio(rx_buf, rpc->dirmap, rpc->xferlen);
+			regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RCF);
+		} else {
+			while (pos < rpc->xferlen) {
+				u32 nbytes = rpc->xferlen - pos;
+
+				if (nbytes > 4)
+					nbytes = 4;
+
+				regmap_write(rpc->regmap, RPC_SMENR, smenr);
+				regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr |
+					     RPC_SMCR_SPIE);
+				ret = wait_msg_xfer_end(rpc);
+				if (ret)
+					goto err_out;
+
+				regmap_read(rpc->regmap, RPC_SMRDR0, &data);
+				memcpy(rx_buf + pos, &data, nbytes);
+				pos += nbytes;
+
+				regmap_write(rpc->regmap, RPC_SMADR,
+					     rpc->addr + pos);
+			}
+		}
+	} else {
+		regmap_write(rpc->regmap, RPC_SMENR, rpc->smenr);
+		regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr | RPC_SMCR_SPIE);
+		ret = wait_msg_xfer_end(rpc);
+		if (ret)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	return reset_control_reset(rpc->rstc);
+}
+
+static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
+					const struct spi_mem_op *op,
+					u64 *offs, size_t *len)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
+
+	rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
+	rpc->smenr = RPC_SMENR_CDE |
+		     RPC_SMENR_CDB(ilog2(op->cmd.buswidth));
+	rpc->totalxferlen = 1;
+	rpc->xfer_dir = SPI_MEM_NO_DATA;
+	rpc->xferlen = 0;
+	rpc->addr = 0;
+
+	if (op->addr.nbytes) {
+		rpc->smenr |= RPC_SMENR_ADB(ilog2(op->addr.buswidth));
+		if (op->addr.nbytes == 4)
+			rpc->smenr |= RPC_SMENR_ADE(0xf);
+		else
+			rpc->smenr |= RPC_SMENR_ADE(0x7);
+
+		if (offs && len)
+			rpc->addr = *offs;
+		else
+			rpc->addr = op->addr.val;
+		rpc->totalxferlen += op->addr.nbytes;
+	}
+
+	if (op->dummy.nbytes) {
+		rpc->smenr |= RPC_SMENR_DME;
+		rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
+		rpc->totalxferlen += op->dummy.nbytes;
+	}
+
+	if (op->data.nbytes || (offs && len)) {
+		switch (op->data.dir) {
+		case SPI_MEM_DATA_IN:
+			rpc->smcr = RPC_SMCR_SPIRE;
+			rpc->xfer_dir = SPI_MEM_DATA_IN;
+			break;
+		case SPI_MEM_DATA_OUT:
+			rpc->smcr = RPC_SMCR_SPIWE;
+			rpc->xfer_dir = SPI_MEM_DATA_OUT;
+			break;
+		default:
+			break;
+		}
+
+		if (offs && len) {
+			rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_set(*len)) |
+				      RPC_SMENR_SPIDB(ilog2(op->data.buswidth));
+			rpc->xferlen = *len;
+			rpc->totalxferlen += *len;
+		} else {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(op->data.nbytes)) |
+				RPC_SMENR_SPIDB(ilog2(op->data.buswidth));
+			rpc->xferlen = op->data.nbytes;
+			rpc->totalxferlen += op->data.nbytes;
+		}
+	}
+}
+
+static bool rpc_spi_mem_supports_op(struct spi_mem *mem,
+				    const struct spi_mem_op *op)
+{
+	if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
+	    op->dummy.buswidth > 4 || op->cmd.buswidth > 4 ||
+	    op->addr.nbytes > 4)
+		return false;
+
+	return true;
+}
+
+static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+				       u64 offs, size_t len, void *buf)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+	int ret;
+
+	if (offs + desc->info.offset + len > U32_MAX)
+		return -EINVAL;
+
+	if (len > 0x4000000)
+		len = 0x4000000;
+
+	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
+				    &desc->info.op_tmpl, &offs, &len);
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, 0);
+	regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RBURST(32) |
+		     RPC_DRCR_RBE);
+
+	regmap_write(rpc->regmap, RPC_DRCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_DREAR, RPC_DREAR_EAC(1));
+	regmap_write(rpc->regmap, RPC_DROPR, 0);
+	regmap_write(rpc->regmap, RPC_DRENR, rpc->smenr);
+	regmap_write(rpc->regmap, RPC_DRDMCR, rpc->dummy);
+	regmap_write(rpc->regmap, RPC_DRDRENR, 0);
+
+	memcpy_fromio(buf, rpc->dirmap + desc->info.offset + offs, len);
+
+	return len;
+}
+
+static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+					u64 offs, size_t len, const void *buf)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+	int ret;
+
+	if (offs + desc->info.offset + len > U32_MAX)
+		return -EINVAL;
+
+	if (len > RPC_WBUF_SIZE)
+		len = RPC_WBUF_SIZE;
+
+	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
+				    &desc->info.op_tmpl, &offs, &len);
+
+	regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD, RPC_CMNCR_MD);
+
+	regmap_write(rpc->regmap, RPC_SMDRENR, 0);
+
+	regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
+
+	memcpy_toio(rpc->wbuf, buf, len);
+
+	regmap_write(rpc->regmap, RPC_SMCMR, rpc->cmd);
+	regmap_write(rpc->regmap, RPC_SMADR, offs);
+	regmap_write(rpc->regmap, RPC_SMENR, rpc->smenr);
+	regmap_write(rpc->regmap, RPC_SMCR, rpc->smcr | RPC_SMCR_SPIE);
+	ret = wait_msg_xfer_end(rpc);
+	if (ret)
+		goto err_out;
+
+	regmap_write(rpc->regmap, RPC_DRCR, RPC_DRCR_RCF);
+
+	regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
+			   RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
+			   RPC_PHYCNT_STRTIM(6));
+
+	return len;
+
+err_out:
+	return reset_control_reset(rpc->rstc);
+}
+
+static int rpc_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+	struct rpc_spi *rpc =
+			spi_controller_get_devdata(desc->mem->spi->controller);
+
+	if (desc->info.offset + desc->info.length > U32_MAX)
+		return -ENOTSUPP;
+
+	if (!rpc_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+		return -ENOTSUPP;
+
+	if (!rpc->dirmap &&
+	    desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN)
+		return -ENOTSUPP;
+
+	if (!rpc->wbuf &&
+	    desc->info.op_tmpl.data.dir == SPI_MEM_DATA_OUT)
+		return -ENOTSUPP;
+
+	return 0;
+}
+
+static int rpc_spi_mem_exec_op(struct spi_mem *mem,
+			       const struct spi_mem_op *op)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(mem->spi->controller);
+	int ret;
+
+	ret = rpc_spi_set_freq(rpc, mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	rpc_spi_mem_set_prep_op_cfg(mem->spi, op, NULL, NULL);
+
+	ret = rpc_spi_io_xfer(rpc,
+			      op->data.dir == SPI_MEM_DATA_OUT ?
+			      op->data.buf.out : NULL,
+			      op->data.dir == SPI_MEM_DATA_IN ?
+			      op->data.buf.in : NULL);
+
+	return ret;
+}
+
+static const struct spi_controller_mem_ops rpc_spi_mem_ops = {
+	.supports_op = rpc_spi_mem_supports_op,
+	.exec_op = rpc_spi_mem_exec_op,
+	.dirmap_create = rpc_spi_mem_dirmap_create,
+	.dirmap_read = rpc_spi_mem_dirmap_read,
+	.dirmap_write = rpc_spi_mem_dirmap_write,
+};
+
+static void rpc_spi_transfer_setup(struct rpc_spi *rpc,
+				   struct spi_message *msg)
+{
+	struct spi_transfer *t, xfer[4] = { };
+	u32 i, xfercnt, xferpos = 0;
+
+	rpc->totalxferlen = 0;
+	rpc->xfer_dir = SPI_MEM_NO_DATA;
+
+	list_for_each_entry(t, &msg->transfers, transfer_list) {
+		if (t->tx_buf) {
+			xfer[xferpos].tx_buf = t->tx_buf;
+			xfer[xferpos].tx_nbits = t->tx_nbits;
+		}
+
+		if (t->rx_buf) {
+			xfer[xferpos].rx_buf = t->rx_buf;
+			xfer[xferpos].rx_nbits = t->rx_nbits;
+		}
+
+		if (t->len) {
+			xfer[xferpos++].len = t->len;
+			rpc->totalxferlen += t->len;
+		}
+
+		if (list_is_last(&t->transfer_list, &msg->transfers)) {
+			if (xferpos > 1) {
+				if (t->rx_buf) {
+					rpc->xfer_dir = SPI_MEM_DATA_IN;
+					rpc->smcr = RPC_SMCR_SPIRE;
+				} else if (t->tx_buf) {
+					rpc->xfer_dir = SPI_MEM_DATA_OUT;
+					rpc->smcr = RPC_SMCR_SPIWE;
+				}
+			}
+		}
+	}
+
+	xfercnt = xferpos;
+	rpc->xferlen = xfer[--xferpos].len;
+	rpc->cmd = RPC_SMCMR_CMD(((u8 *)xfer[0].tx_buf)[0]);
+	rpc->smenr = RPC_SMENR_CDE |
+		     RPC_SMENR_CDB(ilog2((unsigned int)xfer[0].tx_nbits));
+	rpc->addr = 0;
+
+	if (xfercnt > 2 && xfer[1].len && xfer[1].tx_buf) {
+		rpc->smenr |=
+			RPC_SMENR_ADB(ilog2((unsigned int)xfer[1].tx_nbits));
+
+		for (i = 0; i < xfer[1].len; i++)
+			rpc->addr |= ((u8 *)xfer[1].tx_buf)[i] <<
+				     (8 * (xfer[1].len - i - 1));
+
+		if (xfer[1].len == 4)
+			rpc->smenr |= RPC_SMENR_ADE(0xf);
+		else
+			rpc->smenr |= RPC_SMENR_ADE(0x7);
+	}
+
+	if (xfercnt > 3 && xfer[2].len && xfer[2].tx_buf) {
+		rpc->smenr |= RPC_SMENR_DME;
+		rpc->dummy = RPC_SMDMCR_DMCYC(xfer[2].len);
+	}
+
+	for (i = xfercnt - 1; i < xfercnt && xfercnt > 1; i++) {
+		if (xfer[i].rx_buf) {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(xfer[i].len)) |
+				RPC_SMENR_SPIDB(ilog2
+					((unsigned int)xfer[i].rx_nbits));
+		} else if (xfer[i].tx_buf) {
+			rpc->smenr |=
+				RPC_SMENR_SPIDE(rpc_bits_set(xfer[i].len)) |
+				RPC_SMENR_SPIDB(ilog2
+					((unsigned int)xfer[i].tx_nbits));
+		}
+	}
+}
+
+static inline int rpc_spi_xfer_message(struct rpc_spi *rpc,
+				       struct spi_transfer *data_xfer)
+{
+	int ret;
+
+	ret = rpc_spi_set_freq(rpc, data_xfer->speed_hz);
+	if (ret)
+		return ret;
+
+	ret = rpc_spi_io_xfer(rpc,
+			      rpc->xfer_dir == SPI_MEM_DATA_OUT ?
+			      data_xfer->tx_buf : NULL,
+			      rpc->xfer_dir == SPI_MEM_DATA_IN ?
+			      data_xfer->rx_buf : NULL);
+
+	return ret;
+}
+
+static int rpc_spi_transfer_one_message(struct spi_controller *ctlr,
+					struct spi_message *msg)
+{
+	struct rpc_spi *rpc = spi_controller_get_devdata(ctlr);
+	struct spi_transfer *data_xfer;
+	int ret;
+
+	rpc_spi_transfer_setup(rpc, msg);
+
+	data_xfer = list_last_entry(&msg->transfers, struct spi_transfer,
+				    transfer_list);
+
+	ret = rpc_spi_xfer_message(rpc, data_xfer);
+	if (ret)
+		goto out;
+
+	msg->status = 0;
+	msg->actual_length = rpc->totalxferlen;
+out:
+	spi_finalize_current_message(ctlr);
+	return 0;
+}
+
+static const struct regmap_range rpc_spi_volatile_ranges[] = {
+	regmap_reg_range(RPC_SMRDR0, RPC_SMRDR0),
+	regmap_reg_range(RPC_SMWDR0, RPC_SMWDR0),
+	regmap_reg_range(RPC_CMNSR, RPC_CMNSR),
+};
+
+static const struct regmap_access_table rpc_spi_volatile_table = {
+	.yes_ranges	= rpc_spi_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(rpc_spi_volatile_ranges),
+};
+
+static const struct regmap_config rpc_spi_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.fast_io = true,
+	.max_register = RPC_PHYOFFSET2,
+	.volatile_table = &rpc_spi_volatile_table,
+};
+
+static int rpc_spi_probe(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr;
+	struct resource *res;
+	struct rpc_spi *rpc;
+	struct device_node *flash;
+	int ret;
+
+	flash = of_get_next_child(pdev->dev.of_node, NULL);
+	if (!flash) {
+		dev_warn(&pdev->dev, "no flash node found\n");
+		return -ENODEV;
+	}
+
+	ret = of_device_is_compatible(flash, "jedec,spi-nor");
+	if (!ret) {
+		dev_warn(&pdev->dev, "no spi-nor device found\n");
+		return -ENODEV;
+	}
+
+	ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc));
+	if (!ctlr)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ctlr);
+
+	rpc = spi_controller_get_devdata(ctlr);
+
+	ctlr->dev.of_node = pdev->dev.of_node;
+
+	rpc->clk_rpc = devm_clk_get(&pdev->dev, "rpc");
+	if (IS_ERR(rpc->clk_rpc))
+		return PTR_ERR(rpc->clk_rpc);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	rpc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rpc->base))
+		return PTR_ERR(rpc->base);
+
+	rpc->regmap = devm_regmap_init_mmio(&pdev->dev, rpc->base,
+					    &rpc_spi_regmap_config);
+	if (IS_ERR(rpc->regmap)) {
+		dev_err(&pdev->dev,
+			"failed to init regmap for rpc-spi, error %ld\n",
+			PTR_ERR(rpc->regmap));
+		return PTR_ERR(rpc->regmap);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
+	rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rpc->dirmap))
+		rpc->dirmap = NULL;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wbuf");
+	rpc->wbuf = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rpc->wbuf))
+		rpc->wbuf = NULL;
+
+	rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rpc->rstc))
+		return PTR_ERR(rpc->rstc);
+
+	pm_runtime_enable(&pdev->dev);
+	ctlr->auto_runtime_pm = true;
+
+	ctlr->num_chipselect = 1;
+	ctlr->mem_ops = &rpc_spi_mem_ops;
+	ctlr->transfer_one_message = rpc_spi_transfer_one_message;
+
+	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD;
+
+	rpc_spi_hw_init(rpc);
+
+	ret = spi_register_controller(ctlr);
+	if (ret) {
+		dev_err(&pdev->dev, "spi_register_controller failed\n");
+		goto err_put_ctlr;
+	}
+	return 0;
+
+err_put_ctlr:
+	spi_controller_put(ctlr);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int rpc_spi_remove(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	spi_unregister_controller(ctlr);
+
+	return 0;
+}
+
+static const struct of_device_id rpc_spi_of_ids[] = {
+	{ .compatible = "renesas,rcar-gen3-rpc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rpc_spi_of_ids);
+
+#ifdef CONFIG_PM_SLEEP
+static int rpc_spi_suspend(struct device *dev)
+{
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+	return spi_controller_suspend(ctlr);
+}
+
+static int rpc_spi_resume(struct device *dev)
+{
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+
+	return spi_controller_resume(ctlr);
+}
+
+static SIMPLE_DEV_PM_OPS(rpc_spi_pm_ops, rpc_spi_suspend, rpc_spi_resume);
+#define DEV_PM_OPS	(&rpc_spi_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver rpc_spi_driver = {
+	.probe = rpc_spi_probe,
+	.remove = rpc_spi_remove,
+	.driver = {
+		.name = "rpc-spi",
+		.of_match_table = rpc_spi_of_ids,
+		.pm = DEV_PM_OPS,
+	},
+};
+module_platform_driver(rpc_spi_driver);
+
+MODULE_AUTHOR("Mason Yang <masonccyang@mxic.com.tw>");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 RPC-IF SPI controller driver");
+MODULE_LICENSE("GPL v2");
-- 
2.20.1

Re: Applied "spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver" to the spi tree

[Marek Vasut]

On 2/12/19 3:22 PM, Mark Brown wrote:
> The patch
> 
>    spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
> 
> has been applied to the spi tree at
> 
>    https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 
> 
> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.  
> 
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
> 
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
> 
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.

How did that happen when there were still comments and open topics ?

-- 
Best regards,
Marek Vasut

Re: Applied "spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver" to the spi tree

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 624 bytes --]

On Tue, Feb 12, 2019 at 03:33:12PM +0100, Marek Vasut wrote:
> On 2/12/19 3:22 PM, Mark Brown wrote:

> > Please add any relevant lists and maintainers to the CCs when replying
> > to this mail.

> How did that happen when there were still comments and open topics ?

Mason had submitted a new verison a couple of weeks ago and there'd been
no replies on the new version so I'd thought that all the prior issues
had been addressed.  I guess that's not the case?  The thread on the
version before was a bit long but seemed to peter out, though looking at
the archives it seems the main issue was that Mason stopped replying.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: Applied "spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver" to the spi tree

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 867 bytes --]

On Tue, Feb 12, 2019 at 02:43:59PM +0000, Mark Brown wrote:

> Mason had submitted a new verison a couple of weeks ago and there'd been
> no replies on the new version so I'd thought that all the prior issues
> had been addressed.  I guess that's not the case?  The thread on the
> version before was a bit long but seemed to peter out, though looking at
> the archives it seems the main issue was that Mason stopped replying.

Following some IRC discussion with Marek and Sergei I've dropped these
for now.  The interaction with the HyperFlash support seems unclear
still and might be a bit more than a simple refactoring, worst case
it'll be binding incompatible though hopefully not.  Mason, if you could
work with them to figure out the MFD that'll be needed the driver looks
fine from a SPI subsystem point of view.

Sorry about the confusion for everyone here.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: Applied "spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver" to the spi tree

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 786 bytes --]

On Wed, Feb 13, 2019 at 04:25:32PM +0800, masonccyang@mxic.com.tw wrote:

> From current mainline branch, MFD seems support the device which is on 
> the same hardware bus(i.e, I2C, SPI, MMIO and SPMI)for multi-function 
> by Read/Write the common same registers.

That's most MFDs but there are some that do some level of enumeration
(even if it's just looking at the device ID that got registered) to
decide what subdevices get registered, that's what people are suggesting
here I think.

> I am checking and not sure if MMIO of MFD could support RPC-IF for 
> different hardware bus on SPI and CFI.
> I also doubt if this method is a correct solution for RPC-IF works
> either in SPI mode or CFI mode.

For MMIO devices MFD just passes through the parent resources.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: Applied "spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver" to the spi tree

[Marek Vasut]

On 2/13/19 1:16 PM, Mark Brown wrote:
> On Wed, Feb 13, 2019 at 04:25:32PM +0800, masonccyang@mxic.com.tw wrote:
> 
>> From current mainline branch, MFD seems support the device which is on 
>> the same hardware bus(i.e, I2C, SPI, MMIO and SPMI)for multi-function 
>> by Read/Write the common same registers.
> 
> That's most MFDs but there are some that do some level of enumeration
> (even if it's just looking at the device ID that got registered) to
> decide what subdevices get registered, that's what people are suggesting
> here I think.

Right. Although I think some of the code could be shared between the SPI
and HF modes.

>> I am checking and not sure if MMIO of MFD could support RPC-IF for 
>> different hardware bus on SPI and CFI.
>> I also doubt if this method is a correct solution for RPC-IF works
>> either in SPI mode or CFI mode.
> 
> For MMIO devices MFD just passes through the parent resources.
> 


-- 
Best regards,
Marek Vasut

Re: Applied "spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver" to the spi tree

[Marek Vasut]

On 2/14/19 10:12 AM, masonccyang@mxic.com.tw wrote:
> Hi,

Hi,

>> "Marek Vasut" <marek.vasut@gmail.com>
>> 2019/02/13 下午 08:37
>>
>> On 2/13/19 1:16 PM, Mark Brown wrote:
>> > On Wed, Feb 13, 2019 at 04:25:32PM +0800, masonccyang@mxic.com.tw wrote:
>> >
>> >> From current mainline branch, MFD seems support the device which is on
>> >> the same hardware bus(i.e, I2C, SPI, MMIO and SPMI)for multi-function
>> >> by Read/Write the common same registers.
>> >
>> > That's most MFDs but there are some that do some level of enumeration
>> > (even if it's just looking at the device ID that got registered) to
>> > decide what subdevices get registered, that's what people are suggesting
>> > here I think.
>>
>> Right. Although I think some of the code could be shared between the SPI
>> and HF modes.
> 
> If it is right that MFD is based on the same hardware bus for multi
> function
> device,i.e,. based on SPI/I2C/PCI bus to register device by
> mfd_add_devices().
> 
> For a multi function device works on different hardware bus, it has nothing
> to do with mfd-core.c(MFD framework) even though their driver are in
> drivers/mfd directory, i.e,. mcp-core.x, sm501.c.
> 
> Since RPC-IF works on different hardware bus for SPI bus or CFI
> HyperFlash bus,
> is it a good idea to implement MFD framework for RPC-IF ?
> Or we just separate RPC-IF driver by spi mode and cfi mode ?
> 
> any comments/opinions on RPC-IF/MFD-framework is welcome!

Mark mentioned it before, you can use the MFD for MMIO too.
The goal here is to have some common code which is shared by the SPI and
HF part of the driver, and then a separate SPI handling code and HF
handling code. The common code should determine which part to activate
based on the DT.

-- 
Best regards,
Marek Vasut

Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Sergei Shtylyov]

Hello!

On 01/28/2019 09:49 AM, Mason Yang wrote:

> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[...]
> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
> new file mode 100644
> index 0000000..ea12017
> --- /dev/null
> +++ b/drivers/spi/spi-renesas-rpc.c
> @@ -0,0 +1,804 @@
[...]
> +static void rpc_spi_hw_init(struct rpc_spi *rpc)
> +{
> +	//
> +	// NOTE: The 0x260 are undocumented bits, but they must be set.
> +	//	RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
> +	//	0x0 : the delay is biggest,
> +	//	0x1 : the delay is 2nd biggest,
> +	//	On H3 ES1.x, the value should be 0, while on others,
> +	//	the value should be 6.
> +	//
> +	regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
> +				  RPC_PHYCNT_STRTIM(6) | 0x260);
> +
> +	//
> +	// NOTE: The 0x1511144 are undocumented bits, but they must be set
> +	//       for RPC_PHYOFFSET1.
> +	//	 The 0x31 are undocumented bits, but they must be set
> +	//	 for RPC_PHYOFFSET2.
> +	//
> +	regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
> +		     0x1511144);
> +	regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
> +		     RPC_PHYOFFSET2_OCTTMG(4));
> +	regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
> +		     RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
> +	regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
> +		     RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
> +		     RPC_CMNCR_BSZ(0));
> +}

   We clearly need runtime PM get/put() calls around this code. Otherwise,
we're dependant on U-Boot leaving the clocks enabled...

[...]

MBR, Sergei

Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Geert Uytterhoeven]

Hi Sergei,

On Thu, Mar 7, 2019 at 6:50 PM Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> On 01/28/2019 09:49 AM, Mason Yang wrote:
> > Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
> >
> > Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> [...]
> > diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
> > new file mode 100644
> > index 0000000..ea12017
> > --- /dev/null
> > +++ b/drivers/spi/spi-renesas-rpc.c
> > @@ -0,0 +1,804 @@
> [...]
> > +static void rpc_spi_hw_init(struct rpc_spi *rpc)
> > +{
> > +     //
> > +     // NOTE: The 0x260 are undocumented bits, but they must be set.
> > +     //      RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
> > +     //      0x0 : the delay is biggest,
> > +     //      0x1 : the delay is 2nd biggest,
> > +     //      On H3 ES1.x, the value should be 0, while on others,
> > +     //      the value should be 6.
> > +     //
> > +     regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
> > +                               RPC_PHYCNT_STRTIM(6) | 0x260);
> > +
> > +     //
> > +     // NOTE: The 0x1511144 are undocumented bits, but they must be set
> > +     //       for RPC_PHYOFFSET1.
> > +     //       The 0x31 are undocumented bits, but they must be set
> > +     //       for RPC_PHYOFFSET2.
> > +     //
> > +     regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
> > +                  0x1511144);
> > +     regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
> > +                  RPC_PHYOFFSET2_OCTTMG(4));
> > +     regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
> > +                  RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
> > +     regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
> > +                  RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
> > +                  RPC_CMNCR_BSZ(0));
> > +}
>
>    We clearly need runtime PM get/put() calls around this code. Otherwise,
> we're dependant on U-Boot leaving the clocks enabled...

Even that would be futile, as the common clock framework disables all
unused clocks at late boot time.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Sergei Shtylyov]

Hello!

On 03/08/2019 12:14 PM, Geert Uytterhoeven wrote:

>>> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>>>
>>> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> [...]
>>> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
>>> new file mode 100644
>>> index 0000000..ea12017
>>> --- /dev/null
>>> +++ b/drivers/spi/spi-renesas-rpc.c
>>> @@ -0,0 +1,804 @@
>> [...]
>>> +static void rpc_spi_hw_init(struct rpc_spi *rpc)
>>> +{
>>> +     //
>>> +     // NOTE: The 0x260 are undocumented bits, but they must be set.
>>> +     //      RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
>>> +     //      0x0 : the delay is biggest,
>>> +     //      0x1 : the delay is 2nd biggest,
>>> +     //      On H3 ES1.x, the value should be 0, while on others,
>>> +     //      the value should be 6.
>>> +     //
>>> +     regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
>>> +                               RPC_PHYCNT_STRTIM(6) | 0x260);
>>> +
>>> +     //
>>> +     // NOTE: The 0x1511144 are undocumented bits, but they must be set
>>> +     //       for RPC_PHYOFFSET1.
>>> +     //       The 0x31 are undocumented bits, but they must be set
>>> +     //       for RPC_PHYOFFSET2.
>>> +     //
>>> +     regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
>>> +                  0x1511144);
>>> +     regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
>>> +                  RPC_PHYOFFSET2_OCTTMG(4));
>>> +     regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
>>> +                  RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
>>> +     regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
>>> +                  RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
>>> +                  RPC_CMNCR_BSZ(0));
>>> +}
>>
>>    We clearly need runtime PM get/put() calls around this code. Otherwise,
>> we're dependant on U-Boot leaving the clocks enabled...
> 
> Even that would be futile, as the common clock framework disables all
> unused clocks at late boot time.

   This code is executed during the probing time and it indeed works. The clocks seem
to be disabled somewhat later...

> Gr{oetje,eeting}s,
> 
>                         Geert

MBR, Sergei

Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Sergei Shtylyov]

Hello!

On 01/28/2019 09:49 AM, Mason Yang wrote:

> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

   I've just found an error due to which my flash couldn't be read.

[...]
> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
> new file mode 100644
> index 0000000..ea12017
> --- /dev/null
> +++ b/drivers/spi/spi-renesas-rpc.c
> @@ -0,0 +1,804 @@
[...]
> +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
> +					const struct spi_mem_op *op,
> +					u64 *offs, size_t *len)
> +{
> +	struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);

> +	if (op->dummy.nbytes) {
> +		rpc->smenr |= RPC_SMENR_DME;
> +		rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);

   SMDMCR.DMCYC is in bits -- you forgot to multiply by 8.

> +		rpc->totalxferlen += op->dummy.nbytes;
> +	}[...]
> +static void rpc_spi_transfer_setup(struct rpc_spi *rpc,
> +				   struct spi_message *msg)
> +{
> +	struct spi_transfer *t, xfer[4] = { };
> +	u32 i, xfercnt, xferpos = 0;
[...]
> +	if (xfercnt > 3 && xfer[2].len && xfer[2].tx_buf) {
> +		rpc->smenr |= RPC_SMENR_DME;
> +		rpc->dummy = RPC_SMDMCR_DMCYC(xfer[2].len);

    Here as well, I guess.

[...]

MBR, Sergei

Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Sergei Shtylyov]

Hello!

On 03/25/2019 11:28 AM, masonccyang@mxic.com.tw wrote:

>> > +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
>> > +               const struct spi_mem_op *op,
>> > +               u64 *offs, size_t *len)
>> > +{
>> > +   struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
>>
>> > +   if (op->dummy.nbytes) {
>> > +      rpc->smenr |= RPC_SMENR_DME;
>> > +      rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
>>
>>    SMDMCR.DMCYC is in bits -- you forgot to multiply by 8.
> 
> ?
> 
> It's dummy cycles setting, i.e,. 0 is 1 cycle dummy and

   Yeah, I should've written "cycles", sorry about that.

> max is 0x13 for 20 cycle dummy, depends on transfer bit size setting = 1, 4 or 8.
> right ?

   Probably...

[...]

MBR, Sergei

Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Sergei Shtylyov]

On 03/25/2019 10:12 PM, Sergei Shtylyov wrote:

>>>> +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
>>>> +               const struct spi_mem_op *op,
>>>> +               u64 *offs, size_t *len)
>>>> +{
>>>> +   struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
>>>
>>>> +   if (op->dummy.nbytes) {
>>>> +      rpc->smenr |= RPC_SMENR_DME;
>>>> +      rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
>>>
>>>    SMDMCR.DMCYC is in bits -- you forgot to multiply by 8.
>>
>> ?
>>
>> It's dummy cycles setting, i.e,. 0 is 1 cycle dummy and
> 
>    Yeah, I should've written "cycles", sorry about that.

   I also should've mentioned that w/o this change the "read SFDP" command
returns garbage and the flash doesn't work.

[...]

MBR, Sergei

Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Sergei Shtylyov]

Hello!

On 03/27/2019 04:32 AM, masonccyang@mxic.com.tw wrote:

>> >>>> +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
>> >>>> +               const struct spi_mem_op *op,
>> >>>> +               u64 *offs, size_t *len)
>> >>>> +{
>> >>>> +   struct rpc_spi *rpc = spi_controller_get_devdata(spi->controller);
>> >>>
>> >>>> +   if (op->dummy.nbytes) {
>> >>>> +      rpc->smenr |= RPC_SMENR_DME;
>> >>>> +      rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
>> >>>
>> >>>    SMDMCR.DMCYC is in bits -- you forgot to multiply by 8.
>> >>
>> >> ?
>> >>
>> >> It's dummy cycles setting, i.e,. 0 is 1 cycle dummy and
>> >
>> >    Yeah, I should've written "cycles", sorry about that.
>>
>>    I also should've mentioned that w/o this change the "read SFDP" command
>> returns garbage and the flash doesn't work.
>>
> 
> Have you checked the dummy cycles setting with logical analysis ?

   I don't have a logic analyzer (if you meant it). However, I dumped all the registers
in your driver and Cogent's own driver, and SMDMCR was set to 0 in your driver and to
7 in our driver -- and only our driver then worked correctly.

> As datasheet mentioned it's dummy cycles depends on the transfer bit size setting = 1, 4 or 8.
> Setting RPC_SMDMCR_DMCYC(0x13) in 8 bits data width I got a 20 dummy cycles.
> Also confirmed these 20 dummy cycles by logical analysis equipment.

[...]

> best regards,
> Mason

MBR, Sergei