Re: [PATCH v6 0/2] Bluetooth: btusb: Add protocol support for MediaTek USB devices

[Sean Wang <sean.wang@mediatek.com>]

This is just a gentle ping of the series

On Fri, 2019-01-25 at 07:26 +0800, sean.wang@mediatek.com wrote:
> From: Sean Wang <sean.wang@mediatek.com>
> 
> v6:
> * fix drivers/bluetooth/btusb.c:2683:2-3: Unneeded semicolon based reported by [1]
> * update power-on sequence with adding neccesary tci sleep comand to set up
>   low-power environmnet and a delay to wait the device to be stable.
> * sort variables declarations in reverse xmas order.
> 
> [1]
> http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017017.html
> 
> v5:
> * rebase to latest code base.
> * change the subject prefix.
> * change the place the firmware located at.
> 
> v4:
> * use new BTUSB_TX_WAIT_VND_EVT instead of BTMTKUSB_TX_WAIT_VND_EVT
>   to avoid definition conflict and to fix bulk data transfer fails.
> * use the bluetooth-next as the base
> 
> v3:
> add fixes and enhancements based on [1]
> * reuse flags and evt_skb btusb already had
> * add ctrl_anchor and the corresponding handling
> * apply mtk specific recv function
> * add more comments explaining wmt ctrl urbs behavior.
> 
> [1]
> http://lists.infradead.org/pipermail/linux-mediatek/2018-August/014724.html
> 
> v2:
> 
> add fixes and enhancements based on [1]
> * include /sys/kernel/debug/usb/devices portion in the commit message.
> * turn default into n for config BT_HCIBTUSB_MTK in Kconfig
> * only add MediaTek support to btusb.c
> * drop cmd_sync callback usage
> * use __hci_cmd_send to send WMT commands
> * add wait event handling similar to what is being done in btmtkuart.c
> * submit a control IN URB similar to interrupt IN URB on demand for the WMT
>   commands during setup 
> * add cosmetic changes
> 
> [1]
> http://lists.infradead.org/pipermail/linux-mediatek/2018-August/014650.html
> http://lists.infradead.org/pipermail/linux-mediatek/2018-August/014656.html
> 
> v1:
> 
> This adds the support of enabling MT7668U and MT7663U Bluetooth
> function running on the top of btusb driver. The patch also adds
> a newly created file mtkbt.c able to be reused independently from
> the transport type such as UART, USB and SDIO.
> 
> Sean Wang (2):
>   Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB
>     devices
>   Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB
>     devices
> 
>  drivers/bluetooth/Kconfig |  11 +
>  drivers/bluetooth/btusb.c | 581 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 592 insertions(+)
>