[PATCH net-next 10/12] net: hns3: do not initialize MDIO bus when PHY is inexistent

[Huazhong Tan <tanhuazhong@huawei.com>]

From: Jian Shen <shenjian15@huawei.com>

For some boards, PHY is not connected to MDIO bus. In this case,
MDIO bus initialization will fail, then cause the device initialize
fail.

This patch fixes it by skip the MDIO bus initialization when PHY
is inexistent.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 48eda2c..12be4e2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -121,12 +121,18 @@ static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum)
 
 int hclge_mac_mdio_config(struct hclge_dev *hdev)
 {
+#define PHY_INEXISTENT	255
+
 	struct hclge_mac *mac = &hdev->hw.mac;
 	struct phy_device *phydev;
 	struct mii_bus *mdio_bus;
 	int ret;
 
-	if (hdev->hw.mac.phy_addr >= PHY_MAX_ADDR) {
+	if (hdev->hw.mac.phy_addr == PHY_INEXISTENT) {
+		dev_info(&hdev->pdev->dev,
+			 "no phy device is connected to mdio bus\n");
+		return 0;
+	} else if (hdev->hw.mac.phy_addr >= PHY_MAX_ADDR) {
 		dev_err(&hdev->pdev->dev, "phy_addr(%d) is too large.\n",
 			hdev->hw.mac.phy_addr);
 		return -EINVAL;
-- 
2.7.4