[Patch V2] v4l2-core: fix use-after-free error

[Patch V2] v4l2-core: fix use-after-free error

[Sumit Gupta]

From: sumitg <sumitg@nvidia.com>

Fixing use-after-free within __v4l2_ctrl_handler_setup().
Memory is being freed with kfree(new_ref) for duplicate
control reference entry but cluster is still referring
to the duplicate entry. Change done to update ctrl->cluster
only when new control reference is added. Also, checking if
ctrl->ncontrols is non-zero before accessing controls from
cluster pointer to avoid illegal access when cluster has
zero controls.

 ==================================================================
 BUG: KASAN: use-after-free in __v4l2_ctrl_handler_setup+0x388/0x428
 Read of size 8 at addr ffffffc324e78618 by task systemd-udevd/312

 Allocated by task 312:

 Freed by task 312:

 The buggy address belongs to the object at ffffffc324e78600
  which belongs to the cache kmalloc-64 of size 64
 The buggy address is located 24 bytes inside of
  64-byte region [ffffffc324e78600, ffffffc324e78640)
 The buggy address belongs to the page:
 page:ffffffbf0c939e00 count:1 mapcount:0 mapping:
					(null) index:0xffffffc324e78f80
 flags: 0x4000000000000100(slab)
 raw: 4000000000000100 0000000000000000 ffffffc324e78f80 000000018020001a
 raw: 0000000000000000 0000000100000001 ffffffc37040fb80 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffffffc324e78500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
  ffffffc324e78580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 >ffffffc324e78600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                             ^
  ffffffc324e78680: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
  ffffffc324e78700: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
 ==================================================================

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
---
v2:
* update ctrl->cluster only when new control reference is added.
* check ctrl->ncontrols to avoid illegal access when cluster has zero controls.

 drivers/media/v4l2-core/v4l2-ctrls.c | 53 +++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 25 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 5e3806f..3d0a952 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -2154,15 +2154,6 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
 	if (size_extra_req)
 		new_ref->p_req.p = &new_ref[1];
 
-	if (ctrl->handler == hdl) {
-		/* By default each control starts in a cluster of its own.
-		   new_ref->ctrl is basically a cluster array with one
-		   element, so that's perfect to use as the cluster pointer.
-		   But only do this for the handler that owns the control. */
-		ctrl->cluster = &new_ref->ctrl;
-		ctrl->ncontrols = 1;
-	}
-
 	INIT_LIST_HEAD(&new_ref->node);
 
 	mutex_lock(hdl->lock);
@@ -2195,6 +2186,15 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
 	hdl->buckets[bucket] = new_ref;
 	if (ctrl_ref)
 		*ctrl_ref = new_ref;
+	if (ctrl->handler == hdl) {
+		/* By default each control starts in a cluster of its own.
+		 * new_ref->ctrl is basically a cluster array with one
+		 * element, so that's perfect to use as the cluster pointer.
+		 * But only do this for the handler that owns the control.
+		 */
+		ctrl->cluster = &new_ref->ctrl;
+		ctrl->ncontrols = 1;
+	}
 
 unlock:
 	mutex_unlock(hdl->lock);
@@ -2725,25 +2725,28 @@ int __v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
 		ctrl->done = false;
 
 	list_for_each_entry(ctrl, &hdl->ctrls, node) {
-		struct v4l2_ctrl *master = ctrl->cluster[0];
-		int i;
-
-		/* Skip if this control was already handled by a cluster. */
-		/* Skip button controls and read-only controls. */
-		if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
-		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
-			continue;
+		if (ctrl->ncontrols) {
+			struct v4l2_ctrl *master = ctrl->cluster[0];
+			int i;
+
+			/* Skip if this control was already handled by a */
+			/* cluster. Skip button controls and read-only */
+			/* controls. */
+			if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
+				(ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
+				continue;
 
-		for (i = 0; i < master->ncontrols; i++) {
-			if (master->cluster[i]) {
-				cur_to_new(master->cluster[i]);
-				master->cluster[i]->is_new = 1;
-				master->cluster[i]->done = true;
+			for (i = 0; i < master->ncontrols; i++) {
+				if (master->cluster[i]) {
+					cur_to_new(master->cluster[i]);
+					master->cluster[i]->is_new = 1;
+					master->cluster[i]->done = true;
+				}
 			}
+			ret = call_op(master, s_ctrl);
+			if (ret)
+				break;
 		}
-		ret = call_op(master, s_ctrl);
-		if (ret)
-			break;
 	}
 
 	return ret;
-- 
2.7.4

Re: [Patch V2] v4l2-core: fix use-after-free error

[Hans Verkuil]

On 4/11/19 6:01 PM, Sumit Gupta wrote:
> From: sumitg <sumitg@nvidia.com>
> 
> Fixing use-after-free within __v4l2_ctrl_handler_setup().
> Memory is being freed with kfree(new_ref) for duplicate
> control reference entry but cluster is still referring
> to the duplicate entry. Change done to update ctrl->cluster
> only when new control reference is added. Also, checking if
> ctrl->ncontrols is non-zero before accessing controls from
> cluster pointer to avoid illegal access when cluster has
> zero controls.
> 
>  ==================================================================
>  BUG: KASAN: use-after-free in __v4l2_ctrl_handler_setup+0x388/0x428
>  Read of size 8 at addr ffffffc324e78618 by task systemd-udevd/312
> 
>  Allocated by task 312:
> 
>  Freed by task 312:
> 
>  The buggy address belongs to the object at ffffffc324e78600
>   which belongs to the cache kmalloc-64 of size 64
>  The buggy address is located 24 bytes inside of
>   64-byte region [ffffffc324e78600, ffffffc324e78640)
>  The buggy address belongs to the page:
>  page:ffffffbf0c939e00 count:1 mapcount:0 mapping:
> 					(null) index:0xffffffc324e78f80
>  flags: 0x4000000000000100(slab)
>  raw: 4000000000000100 0000000000000000 ffffffc324e78f80 000000018020001a
>  raw: 0000000000000000 0000000100000001 ffffffc37040fb80 0000000000000000
>  page dumped because: kasan: bad access detected
> 
>  Memory state around the buggy address:
>   ffffffc324e78500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>   ffffffc324e78580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>  >ffffffc324e78600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>                              ^
>   ffffffc324e78680: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
>   ffffffc324e78700: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>  ==================================================================
> 
> Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
> ---
> v2:
> * update ctrl->cluster only when new control reference is added.
> * check ctrl->ncontrols to avoid illegal access when cluster has zero controls.
> 
>  drivers/media/v4l2-core/v4l2-ctrls.c | 53 +++++++++++++++++++-----------------
>  1 file changed, 28 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> index 5e3806f..3d0a952 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -2154,15 +2154,6 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
>  	if (size_extra_req)
>  		new_ref->p_req.p = &new_ref[1];
>  
> -	if (ctrl->handler == hdl) {
> -		/* By default each control starts in a cluster of its own.
> -		   new_ref->ctrl is basically a cluster array with one
> -		   element, so that's perfect to use as the cluster pointer.
> -		   But only do this for the handler that owns the control. */
> -		ctrl->cluster = &new_ref->ctrl;
> -		ctrl->ncontrols = 1;
> -	}
> -
>  	INIT_LIST_HEAD(&new_ref->node);
>  
>  	mutex_lock(hdl->lock);
> @@ -2195,6 +2186,15 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
>  	hdl->buckets[bucket] = new_ref;
>  	if (ctrl_ref)
>  		*ctrl_ref = new_ref;
> +	if (ctrl->handler == hdl) {
> +		/* By default each control starts in a cluster of its own.
> +		 * new_ref->ctrl is basically a cluster array with one
> +		 * element, so that's perfect to use as the cluster pointer.
> +		 * But only do this for the handler that owns the control.
> +		 */
> +		ctrl->cluster = &new_ref->ctrl;
> +		ctrl->ncontrols = 1;
> +	}
>  
>  unlock:
>  	mutex_unlock(hdl->lock);

This looks good.

> @@ -2725,25 +2725,28 @@ int __v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
>  		ctrl->done = false;
>  
>  	list_for_each_entry(ctrl, &hdl->ctrls, node) {
> -		struct v4l2_ctrl *master = ctrl->cluster[0];
> -		int i;
> -
> -		/* Skip if this control was already handled by a cluster. */
> -		/* Skip button controls and read-only controls. */
> -		if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
> -		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
> -			continue;
> +		if (ctrl->ncontrols) {
> +			struct v4l2_ctrl *master = ctrl->cluster[0];
> +			int i;
> +
> +			/* Skip if this control was already handled by a */
> +			/* cluster. Skip button controls and read-only */
> +			/* controls. */
> +			if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
> +				(ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
> +				continue;
>  
> -		for (i = 0; i < master->ncontrols; i++) {
> -			if (master->cluster[i]) {
> -				cur_to_new(master->cluster[i]);
> -				master->cluster[i]->is_new = 1;
> -				master->cluster[i]->done = true;
> +			for (i = 0; i < master->ncontrols; i++) {
> +				if (master->cluster[i]) {
> +					cur_to_new(master->cluster[i]);
> +					master->cluster[i]->is_new = 1;
> +					master->cluster[i]->done = true;
> +				}
>  			}
> +			ret = call_op(master, s_ctrl);
> +			if (ret)
> +				break;
>  		}
> -		ret = call_op(master, s_ctrl);
> -		if (ret)
> -			break;
>  	}
>  
>  	return ret;
> 

These changes shouldn't be needed: when you get here all controls are
guaranteed to have a non-0 ncontrols value.

If it is possible to encounter a control where ncontrols == 0, then
that's a bug elsewhere. But as far as I can tell that isn't the case.

Regards,

	Hans

RE: [Patch V2] v4l2-core: fix use-after-free error

[Sumit Gupta]

On 4/11/19 6:01 PM, Sumit Gupta wrote:
> From: sumitg <sumitg@nvidia.com>
> 
> Fixing use-after-free within __v4l2_ctrl_handler_setup().
> Memory is being freed with kfree(new_ref) for duplicate control 
> reference entry but cluster is still referring to the duplicate entry. 
> Change done to update ctrl->cluster only when new control reference is 
> added. Also, checking if
> ctrl->ncontrols is non-zero before accessing controls from
> cluster pointer to avoid illegal access when cluster has zero 
> controls.
> 
>  ==================================================================
>  BUG: KASAN: use-after-free in __v4l2_ctrl_handler_setup+0x388/0x428
>  Read of size 8 at addr ffffffc324e78618 by task systemd-udevd/312
> 
>  Allocated by task 312:
> 
>  Freed by task 312:
> 
>  The buggy address belongs to the object at ffffffc324e78600
>   which belongs to the cache kmalloc-64 of size 64  The buggy address 
> is located 24 bytes inside of
>   64-byte region [ffffffc324e78600, ffffffc324e78640)  The buggy 
> address belongs to the page:
>  page:ffffffbf0c939e00 count:1 mapcount:0 mapping:
> 					(null) index:0xffffffc324e78f80
>  flags: 0x4000000000000100(slab)
>  raw: 4000000000000100 0000000000000000 ffffffc324e78f80 
> 000000018020001a
>  raw: 0000000000000000 0000000100000001 ffffffc37040fb80 
> 0000000000000000  page dumped because: kasan: bad access detected
> 
>  Memory state around the buggy address:
>   ffffffc324e78500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>   ffffffc324e78580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>  >ffffffc324e78600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>                              ^
>   ffffffc324e78680: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
>   ffffffc324e78700: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc  
> ==================================================================
> 
> Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
> ---
> v2:
> * update ctrl->cluster only when new control reference is added.
> * check ctrl->ncontrols to avoid illegal access when cluster has zero controls.
> 
>  drivers/media/v4l2-core/v4l2-ctrls.c | 53 
> +++++++++++++++++++-----------------
>  1 file changed, 28 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c 
> b/drivers/media/v4l2-core/v4l2-ctrls.c
> index 5e3806f..3d0a952 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -2154,15 +2154,6 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
>  	if (size_extra_req)
>  		new_ref->p_req.p = &new_ref[1];
>  
> -	if (ctrl->handler == hdl) {
> -		/* By default each control starts in a cluster of its own.
> -		   new_ref->ctrl is basically a cluster array with one
> -		   element, so that's perfect to use as the cluster pointer.
> -		   But only do this for the handler that owns the control. */
> -		ctrl->cluster = &new_ref->ctrl;
> -		ctrl->ncontrols = 1;
> -	}
> -
>  	INIT_LIST_HEAD(&new_ref->node);
>  
>  	mutex_lock(hdl->lock);
> @@ -2195,6 +2186,15 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
>  	hdl->buckets[bucket] = new_ref;
>  	if (ctrl_ref)
>  		*ctrl_ref = new_ref;
> +	if (ctrl->handler == hdl) {
> +		/* By default each control starts in a cluster of its own.
> +		 * new_ref->ctrl is basically a cluster array with one
> +		 * element, so that's perfect to use as the cluster pointer.
> +		 * But only do this for the handler that owns the control.
> +		 */
> +		ctrl->cluster = &new_ref->ctrl;
> +		ctrl->ncontrols = 1;
> +	}
>  
>  unlock:
>  	mutex_unlock(hdl->lock);

This looks good.

> @@ -2725,25 +2725,28 @@ int __v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
>  		ctrl->done = false;
>  
>  	list_for_each_entry(ctrl, &hdl->ctrls, node) {
> -		struct v4l2_ctrl *master = ctrl->cluster[0];
> -		int i;
> -
> -		/* Skip if this control was already handled by a cluster. */
> -		/* Skip button controls and read-only controls. */
> -		if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
> -		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
> -			continue;
> +		if (ctrl->ncontrols) {
> +			struct v4l2_ctrl *master = ctrl->cluster[0];
> +			int i;
> +
> +			/* Skip if this control was already handled by a */
> +			/* cluster. Skip button controls and read-only */
> +			/* controls. */
> +			if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
> +				(ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
> +				continue;
>  
> -		for (i = 0; i < master->ncontrols; i++) {
> -			if (master->cluster[i]) {
> -				cur_to_new(master->cluster[i]);
> -				master->cluster[i]->is_new = 1;
> -				master->cluster[i]->done = true;
> +			for (i = 0; i < master->ncontrols; i++) {
> +				if (master->cluster[i]) {
> +					cur_to_new(master->cluster[i]);
> +					master->cluster[i]->is_new = 1;
> +					master->cluster[i]->done = true;
> +				}
>  			}
> +			ret = call_op(master, s_ctrl);
> +			if (ret)
> +				break;
>  		}
> -		ret = call_op(master, s_ctrl);
> -		if (ret)
> -			break;
>  	}
>  
>  	return ret;
> 

These changes shouldn't be needed: when you get here all controls are guaranteed to have a non-0 ncontrols value.

If it is possible to encounter a control where ncontrols == 0, then that's a bug elsewhere. But as far as I can tell that isn't the case.

Regards,

	Hans

Yes, I am getting a control where ncontrols is zero as printed below.
It can be another bug as you said. I think, adding check here will be
helpful to not crash in such cases. Please share if you think otherwise,
then will remove the check.

  int __v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
                  ctrl->done = false;
 
          list_for_each_entry(ctrl, &hdl->ctrls, node) {
  +               if (ctrl->ncontrols == 0)
  +                       pr_crit("<func:%s><ctrl->name:%s><ctrl->ncontrols:%d>\n",
  +                                       __func__, ctrl->name, ctrl->ncontrols);

Log:
  [    8.354464] <func:__v4l2_ctrl_handler_setup><ctrl->name:Group Hold><ctrl->ncontrols:0>


Regards,
Sumit Gupta

Re: [Patch V2] v4l2-core: fix use-after-free error

[Hans Verkuil]

On 4/12/19 3:47 PM, Sumit Gupta wrote:
> 
> On 4/11/19 6:01 PM, Sumit Gupta wrote:
>> From: sumitg <sumitg@nvidia.com>
>>
>> Fixing use-after-free within __v4l2_ctrl_handler_setup().
>> Memory is being freed with kfree(new_ref) for duplicate control 
>> reference entry but cluster is still referring to the duplicate entry. 
>> Change done to update ctrl->cluster only when new control reference is 
>> added. Also, checking if
>> ctrl->ncontrols is non-zero before accessing controls from
>> cluster pointer to avoid illegal access when cluster has zero 
>> controls.
>>
>>  ==================================================================
>>  BUG: KASAN: use-after-free in __v4l2_ctrl_handler_setup+0x388/0x428
>>  Read of size 8 at addr ffffffc324e78618 by task systemd-udevd/312
>>
>>  Allocated by task 312:
>>
>>  Freed by task 312:
>>
>>  The buggy address belongs to the object at ffffffc324e78600
>>   which belongs to the cache kmalloc-64 of size 64  The buggy address 
>> is located 24 bytes inside of
>>   64-byte region [ffffffc324e78600, ffffffc324e78640)  The buggy 
>> address belongs to the page:
>>  page:ffffffbf0c939e00 count:1 mapcount:0 mapping:
>> 					(null) index:0xffffffc324e78f80
>>  flags: 0x4000000000000100(slab)
>>  raw: 4000000000000100 0000000000000000 ffffffc324e78f80 
>> 000000018020001a
>>  raw: 0000000000000000 0000000100000001 ffffffc37040fb80 
>> 0000000000000000  page dumped because: kasan: bad access detected
>>
>>  Memory state around the buggy address:
>>   ffffffc324e78500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>>   ffffffc324e78580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>>  >ffffffc324e78600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>>                              ^
>>   ffffffc324e78680: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
>>   ffffffc324e78700: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc  
>> ==================================================================
>>
>> Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
>> Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
>> ---
>> v2:
>> * update ctrl->cluster only when new control reference is added.
>> * check ctrl->ncontrols to avoid illegal access when cluster has zero controls.
>>
>>  drivers/media/v4l2-core/v4l2-ctrls.c | 53 
>> +++++++++++++++++++-----------------
>>  1 file changed, 28 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c 
>> b/drivers/media/v4l2-core/v4l2-ctrls.c
>> index 5e3806f..3d0a952 100644
>> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
>> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
>> @@ -2154,15 +2154,6 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
>>  	if (size_extra_req)
>>  		new_ref->p_req.p = &new_ref[1];
>>  
>> -	if (ctrl->handler == hdl) {
>> -		/* By default each control starts in a cluster of its own.
>> -		   new_ref->ctrl is basically a cluster array with one
>> -		   element, so that's perfect to use as the cluster pointer.
>> -		   But only do this for the handler that owns the control. */
>> -		ctrl->cluster = &new_ref->ctrl;
>> -		ctrl->ncontrols = 1;
>> -	}
>> -
>>  	INIT_LIST_HEAD(&new_ref->node);
>>  
>>  	mutex_lock(hdl->lock);
>> @@ -2195,6 +2186,15 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
>>  	hdl->buckets[bucket] = new_ref;
>>  	if (ctrl_ref)
>>  		*ctrl_ref = new_ref;
>> +	if (ctrl->handler == hdl) {
>> +		/* By default each control starts in a cluster of its own.
>> +		 * new_ref->ctrl is basically a cluster array with one
>> +		 * element, so that's perfect to use as the cluster pointer.
>> +		 * But only do this for the handler that owns the control.
>> +		 */
>> +		ctrl->cluster = &new_ref->ctrl;
>> +		ctrl->ncontrols = 1;
>> +	}
>>  
>>  unlock:
>>  	mutex_unlock(hdl->lock);
> 
> This looks good.
> 
>> @@ -2725,25 +2725,28 @@ int __v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
>>  		ctrl->done = false;
>>  
>>  	list_for_each_entry(ctrl, &hdl->ctrls, node) {
>> -		struct v4l2_ctrl *master = ctrl->cluster[0];
>> -		int i;
>> -
>> -		/* Skip if this control was already handled by a cluster. */
>> -		/* Skip button controls and read-only controls. */
>> -		if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
>> -		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
>> -			continue;
>> +		if (ctrl->ncontrols) {
>> +			struct v4l2_ctrl *master = ctrl->cluster[0];
>> +			int i;
>> +
>> +			/* Skip if this control was already handled by a */
>> +			/* cluster. Skip button controls and read-only */
>> +			/* controls. */
>> +			if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
>> +				(ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
>> +				continue;
>>  
>> -		for (i = 0; i < master->ncontrols; i++) {
>> -			if (master->cluster[i]) {
>> -				cur_to_new(master->cluster[i]);
>> -				master->cluster[i]->is_new = 1;
>> -				master->cluster[i]->done = true;
>> +			for (i = 0; i < master->ncontrols; i++) {
>> +				if (master->cluster[i]) {
>> +					cur_to_new(master->cluster[i]);
>> +					master->cluster[i]->is_new = 1;
>> +					master->cluster[i]->done = true;
>> +				}
>>  			}
>> +			ret = call_op(master, s_ctrl);
>> +			if (ret)
>> +				break;
>>  		}
>> -		ret = call_op(master, s_ctrl);
>> -		if (ret)
>> -			break;
>>  	}
>>  
>>  	return ret;
>>
> 
> These changes shouldn't be needed: when you get here all controls are guaranteed to have a non-0 ncontrols value.
> 
> If it is possible to encounter a control where ncontrols == 0, then that's a bug elsewhere. But as far as I can tell that isn't the case.
> 
> Regards,
> 
> 	Hans
> 
> Yes, I am getting a control where ncontrols is zero as printed below.
> It can be another bug as you said. I think, adding check here will be
> helpful to not crash in such cases. Please share if you think otherwise,
> then will remove the check.
> 
>   int __v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
>                   ctrl->done = false;
>  
>           list_for_each_entry(ctrl, &hdl->ctrls, node) {
>   +               if (ctrl->ncontrols == 0)
>   +                       pr_crit("<func:%s><ctrl->name:%s><ctrl->ncontrols:%d>\n",
>   +                                       __func__, ctrl->name, ctrl->ncontrols);
> 
> Log:
>   [    8.354464] <func:__v4l2_ctrl_handler_setup><ctrl->name:Group Hold><ctrl->ncontrols:0>

Something went wrong if you get this.

This should never happen. Dig a bit deeper to find out how you get into this situation.

You did check hdl->error before calling v4l2_ctrl_handler_setup? Although even if an error
occurred when adding controls, this should still not happen.

Regards,

	Hans

> 
> 
> Regards,
> Sumit Gupta
>