From: Grygorii Strashko <grygorii.strashko@ti.com>
To: <netdev@vger.kernel.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
"David S . Miller" <davem@davemloft.net>,
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Sekhar Nori <nsekhar@ti.com>,
<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
Murali Karicheri <m-karicheri2@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH net-next v2 09/20] net: ethernet: ti: ale: fix mcast super setting
Date: Fri, 26 Apr 2019 20:12:31 +0300 [thread overview]
Message-ID: <1556298762-8632-10-git-send-email-grygorii.strashko@ti.com> (raw)
In-Reply-To: <1556298762-8632-1-git-send-email-grygorii.strashko@ti.com>
Use correct define ALE_SUPER for ALE Multicast Address Table Entry
Supervisory Packet (SUPER) bit setting instead of ALE_BLOCKED. No issues
were observed till now as it have never been set, but it's going to be used
by new CPSW switch driver.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/net/ethernet/ti/cpsw_ale.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index d6ee344e1fe1..17c59fa2561d 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -355,7 +355,7 @@ int cpsw_ale_add_mcast(struct cpsw_ale *ale, const u8 *addr, int port_mask,
cpsw_ale_set_vlan_entry_type(ale_entry, flags, vid);
cpsw_ale_set_addr(ale_entry, addr);
- cpsw_ale_set_super(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0);
+ cpsw_ale_set_super(ale_entry, (flags & ALE_SUPER) ? 1 : 0);
cpsw_ale_set_mcast_state(ale_entry, mcast_state);
mask = cpsw_ale_get_port_mask(ale_entry,
--
2.17.1
next prev parent reply other threads:[~2019-04-26 17:15 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-26 17:12 [PATCH net-next v2 00/20] net: ethernet: ti: clean up and optimizations Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 01/20] net: ethernet: ti: convert to SPDX license identifiers Grygorii Strashko
2019-04-26 22:04 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 02/20] net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config option Grygorii Strashko
2019-04-26 22:06 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 03/20] net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE " Grygorii Strashko
2019-04-26 22:08 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 04/20] net: ethernet: ti: cpsw: update cpsw_split_res() to accept cpsw_common Grygorii Strashko
2019-04-26 22:09 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 05/20] net: ethernet: ti: cpsw: use local var dev in probe Grygorii Strashko
2019-04-26 22:10 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 06/20] net: ethernet: ti: cpsw: drop pinctrl_pm_select_default_state call Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 07/20] net: ethernet: ti: cpsw: use devm_alloc_etherdev_mqs() Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 08/20] net: ethernet: ti: cpsw: drop cpsw_tx_packet_submit() Grygorii Strashko
2019-04-26 17:12 ` Grygorii Strashko [this message]
2019-04-26 17:12 ` [PATCH net-next v2 10/20] net: ethernet: ti: ale: use define for host port in cpsw_ale_set_allmulti() Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 11/20] net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac mode Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 12/20] net: ethernet: ti: ale: do not auto delete mcast super entries Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 13/20] net: ethernet: ti: davinci_mdio: use devm_ioremap() Grygorii Strashko
2019-04-26 22:12 ` Andrew Lunn
2019-04-26 17:12 ` [PATCH net-next v2 14/20] net: ethernet: ti: cpsw: refactor probe to group common hw initialization Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 15/20] net: ethernet: ti: cpsw: move cpsw definitions in priv header Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 16/20] net: ethernet: ti: davinci_cpdma: use dma_addr_t for desc_mem_phys and desc_hw_addr Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 17/20] net: ethernet: ti: cpsw: move common hw init code in separate func Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 18/20] net: ethernet: ti: cpsw: introduce mac sl module api Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 19/20] net: ethernet: ti: cpsw: switch to use mac sl api Grygorii Strashko
2019-04-26 17:12 ` [PATCH net-next v2 20/20] net: ethernet: ti: cpsw: move ethtool func in separate file Grygorii Strashko
2019-04-26 22:16 ` Andrew Lunn
2019-04-26 21:20 ` [PATCH net-next v2 00/20] net: ethernet: ti: clean up and optimizations Jakub Kicinski
2019-04-27 21:12 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1556298762-8632-10-git-send-email-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=ivan.khoronzhuk@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=m-karicheri2@ti.com \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).