From: Dan Williams <dan.j.williams@intel.com>
To: akpm@linux-foundation.org
Cc: Michal Hocko <mhocko@suse.com>, Vlastimil Babka <vbabka@suse.cz>,
Logan Gunthorpe <logang@deltatee.com>,
Jane Chu <jane.chu@oracle.com>,
linux-nvdimm@lists.01.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, osalvador@suse.de, mhocko@suse.com
Subject: [PATCH v7 03/12] mm/sparsemem: Add helpers track active portions of a section at boot
Date: Wed, 01 May 2019 22:55:37 -0700 [thread overview]
Message-ID: <155677653785.2336373.11131100812252340469.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <155677652226.2336373.8700273400832001094.stgit@dwillia2-desk3.amr.corp.intel.com>
Prepare for hot{plug,remove} of sub-ranges of a section by tracking a
section active bitmask, each bit representing 2MB (SECTION_SIZE (128M) /
map_active bitmask length (64)). If it turns out that 2MB is too large
of an active tracking granularity it is trivial to increase the size of
the map_active bitmap.
The implications of a partially populated section is that pfn_valid()
needs to go beyond a valid_section() check and read the sub-section
active ranges from the bitmask.
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
include/linux/mmzone.h | 29 ++++++++++++++++++++++++++++-
mm/page_alloc.c | 4 +++-
mm/sparse.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 6726fc175b51..cffde898e345 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1175,6 +1175,8 @@ struct mem_section_usage {
unsigned long pageblock_flags[0];
};
+void section_active_init(unsigned long pfn, unsigned long nr_pages);
+
struct page;
struct page_ext;
struct mem_section {
@@ -1312,12 +1314,36 @@ static inline struct mem_section *__pfn_to_section(unsigned long pfn)
extern int __highest_present_section_nr;
+static inline int section_active_index(phys_addr_t phys)
+{
+ return (phys & ~(PA_SECTION_MASK)) / SECTION_ACTIVE_SIZE;
+}
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
+{
+ int idx = section_active_index(PFN_PHYS(pfn));
+
+ return !!(ms->usage->map_active & (1UL << idx));
+}
+#else
+static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
+{
+ return 1;
+}
+#endif
+
#ifndef CONFIG_HAVE_ARCH_PFN_VALID
static inline int pfn_valid(unsigned long pfn)
{
+ struct mem_section *ms;
+
if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
return 0;
- return valid_section(__nr_to_section(pfn_to_section_nr(pfn)));
+ ms = __nr_to_section(pfn_to_section_nr(pfn));
+ if (!valid_section(ms))
+ return 0;
+ return pfn_section_valid(ms, pfn);
}
#endif
@@ -1349,6 +1375,7 @@ void sparse_init(void);
#define sparse_init() do {} while (0)
#define sparse_index_init(_sec, _nid) do {} while (0)
#define pfn_present pfn_valid
+#define section_active_init(_pfn, _nr_pages) do {} while (0)
#endif /* CONFIG_SPARSEMEM */
/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 61c2b54a5b61..a68735c79609 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7291,10 +7291,12 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
/* Print out the early node map */
pr_info("Early memory node ranges\n");
- for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid)
+ for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
pr_info(" node %3d: [mem %#018Lx-%#018Lx]\n", nid,
(u64)start_pfn << PAGE_SHIFT,
((u64)end_pfn << PAGE_SHIFT) - 1);
+ section_active_init(start_pfn, end_pfn - start_pfn);
+ }
/* Initialise every node */
mminit_verify_pageflags_layout();
diff --git a/mm/sparse.c b/mm/sparse.c
index f87de7ad32c8..8d4f28e2c25e 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -210,6 +210,54 @@ static inline unsigned long first_present_section_nr(void)
return next_present_section_nr(-1);
}
+static unsigned long section_active_mask(unsigned long pfn,
+ unsigned long nr_pages)
+{
+ int idx_start, idx_size;
+ phys_addr_t start, size;
+
+ if (!nr_pages)
+ return 0;
+
+ start = PFN_PHYS(pfn);
+ size = PFN_PHYS(min(nr_pages, PAGES_PER_SECTION
+ - (pfn & ~PAGE_SECTION_MASK)));
+ size = ALIGN(size, SECTION_ACTIVE_SIZE);
+
+ idx_start = section_active_index(start);
+ idx_size = section_active_index(size);
+
+ if (idx_size == 0)
+ return -1;
+ return ((1UL << idx_size) - 1) << idx_start;
+}
+
+void section_active_init(unsigned long pfn, unsigned long nr_pages)
+{
+ int end_sec = pfn_to_section_nr(pfn + nr_pages - 1);
+ int i, start_sec = pfn_to_section_nr(pfn);
+
+ if (!nr_pages)
+ return;
+
+ for (i = start_sec; i <= end_sec; i++) {
+ struct mem_section *ms;
+ unsigned long mask;
+ unsigned long pfns;
+
+ pfns = min(nr_pages, PAGES_PER_SECTION
+ - (pfn & ~PAGE_SECTION_MASK));
+ mask = section_active_mask(pfn, pfns);
+
+ ms = __nr_to_section(i);
+ ms->usage->map_active |= mask;
+ pr_debug("%s: sec: %d mask: %#018lx\n", __func__, i, ms->usage->map_active);
+
+ pfn += pfns;
+ nr_pages -= pfns;
+ }
+}
+
/* Record a memory area against a node. */
void __init memory_present(int nid, unsigned long start, unsigned long end)
{
next prev parent reply other threads:[~2019-05-02 6:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-02 5:55 [PATCH v7 00/12] mm: Sub-section memory hotplug support Dan Williams
2019-05-02 5:55 ` [PATCH v7 01/12] mm/sparsemem: Introduce struct mem_section_usage Dan Williams
2019-05-03 7:35 ` Oscar Salvador
2019-05-02 5:55 ` [PATCH v7 02/12] mm/sparsemem: Introduce common definitions for the size and mask of a section Dan Williams
2019-05-03 8:06 ` Oscar Salvador
2019-05-02 5:55 ` Dan Williams [this message]
2019-05-02 7:48 ` [PATCH v7 03/12] mm/sparsemem: Add helpers track active portions of a section at boot Oscar Salvador
2019-05-02 14:03 ` Dan Williams
2019-05-03 7:31 ` Oscar Salvador
2019-05-03 19:52 ` Pavel Tatashin
2019-05-02 5:55 ` [PATCH v7 04/12] mm/hotplug: Prepare shrink_{zone, pgdat}_span for sub-section removal Dan Williams
2019-05-02 5:55 ` [PATCH v7 05/12] mm/sparsemem: Convert kmalloc_section_memmap() to populate_section_memmap() Dan Williams
2019-05-03 8:46 ` Oscar Salvador
2019-05-02 5:55 ` [PATCH v7 06/12] mm/hotplug: Kill is_dev_zone() usage in __remove_pages() Dan Williams
2019-05-02 11:27 ` David Hildenbrand
2019-05-03 7:37 ` Oscar Salvador
2019-05-02 5:55 ` [PATCH v7 07/12] mm: Kill is_dev_zone() helper Dan Williams
2019-05-02 5:56 ` [PATCH v7 08/12] mm/sparsemem: Prepare for sub-section ranges Dan Williams
2019-05-03 11:00 ` Oscar Salvador
2019-05-02 5:56 ` [PATCH v7 09/12] mm/sparsemem: Support sub-section hotplug Dan Williams
2019-05-03 12:56 ` Oscar Salvador
2019-06-04 4:17 ` Dan Williams
2019-05-02 5:56 ` [PATCH v7 10/12] mm/devm_memremap_pages: Enable sub-section remap Dan Williams
2019-05-02 5:56 ` [PATCH v7 11/12] libnvdimm/pfn: Fix fsdax-mode namespace info-block zero-fields Dan Williams
2019-05-02 5:56 ` [PATCH v7 12/12] libnvdimm/pfn: Stop padding pmem namespaces to section alignment Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=155677653785.2336373.11131100812252340469.stgit@dwillia2-desk3.amr.corp.intel.com \
--to=dan.j.williams@intel.com \
--cc=akpm@linux-foundation.org \
--cc=jane.chu@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvdimm@lists.01.org \
--cc=logang@deltatee.com \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).