From: Vineet Gupta <vgupta@kernel.org>
To: Randy Dunlap <rdunlap@infradead.org>, linux-kernel@vger.kernel.org
Cc: Vineet Gupta <vgupta@kernel.org>,
linux-snps-arc@lists.infradead.org,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Subject: Re: [PATCH v2] clocksource: arc_timer: eliminate redefined macro error
Date: Thu, 23 Sep 2021 19:49:15 -0700 [thread overview]
Message-ID: <1557caaa-9f90-7613-4627-5c5f59d047fa@kernel.org> (raw)
In-Reply-To: <20210924020825.20317-1-rdunlap@infradead.org>
On 9/23/21 7:08 PM, Randy Dunlap wrote:
> In drivers/clocksource/, 3 drivers use "TIMER_CTRL_IE" with 3 different
> values. Two of them (mps2-timer.c and timer-sp804.c/timer-sp.h) are
> localized and left unmodifed.
>
> One of them uses a shared header file (<soc/arc/timers.h>), which is
> what is causing the "redefined" warnings, so change the macro name in
> that driver only. Also change the TIMER_CTRL_NH macro name.
> Both macro names are prefixed with "ARC_" to reduce the likelihood
> of future name collisions.
>
> In file included from ../drivers/clocksource/timer-sp804.c:24:
> ../drivers/clocksource/timer-sp.h:25: error: "TIMER_CTRL_IE" redefined [-Werror]
> 25 | #define TIMER_CTRL_IE (1 << 5) /* VR */
> ../include/soc/arc/timers.h:20: note: this is the location of the previous definition
> 20 | #define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
>
> Fixes: b26c2e3823ba ("ARC: breakout timer include code into separate header")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Vineet Gupta <vgupta@kernel.org>
> Cc: linux-snps-arc@lists.infradead.org
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Thx,
-Vineet
> ---
> v2: prefix both TIMER_CTRL_xx macros with ARC_ (suggested by
> Shahab Vahedi <Shahab.Vahedi@synopsys.com>
>
> drivers/clocksource/arc_timer.c | 6 +++---
> include/soc/arc/timers.h | 4 ++--
> 2 files changed, 5 insertions(+), 5 deletions(-)
>
> --- linux-next-20210917.orig/include/soc/arc/timers.h
> +++ linux-next-20210917/include/soc/arc/timers.h
> @@ -17,8 +17,8 @@
> #define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
>
> /* CTRL reg bits */
> -#define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
> -#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
> +#define ARC_TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
> +#define ARC_TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
>
> #define ARC_TIMERN_MAX 0xFFFFFFFF
>
> --- linux-next-20210917.orig/drivers/clocksource/arc_timer.c
> +++ linux-next-20210917/drivers/clocksource/arc_timer.c
> @@ -225,7 +225,7 @@ static int __init arc_cs_setup_timer1(st
>
> write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMERN_MAX);
> write_aux_reg(ARC_REG_TIMER1_CNT, 0);
> - write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
> + write_aux_reg(ARC_REG_TIMER1_CTRL, ARC_TIMER_CTRL_NH);
>
> sched_clock_register(arc_timer1_clock_read, 32, arc_timer_freq);
>
> @@ -245,7 +245,7 @@ static void arc_timer_event_setup(unsign
> write_aux_reg(ARC_REG_TIMER0_LIMIT, cycles);
> write_aux_reg(ARC_REG_TIMER0_CNT, 0); /* start from 0 */
>
> - write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IE | TIMER_CTRL_NH);
> + write_aux_reg(ARC_REG_TIMER0_CTRL, ARC_TIMER_CTRL_IE | ARC_TIMER_CTRL_NH);
> }
>
>
> @@ -294,7 +294,7 @@ static irqreturn_t timer_irq_handler(int
> * explicitly clears IP bit
> * 2. Re-arm interrupt if periodic by writing to IE bit [0]
> */
> - write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | TIMER_CTRL_NH);
> + write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | ARC_TIMER_CTRL_NH);
>
> evt->event_handler(evt);
>
next prev parent reply other threads:[~2021-09-24 2:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-24 2:08 [PATCH v2] clocksource: arc_timer: eliminate redefined macro error Randy Dunlap
2021-09-24 2:49 ` Vineet Gupta [this message]
2021-10-24 15:40 ` [tip: timers/core] clocksource/drivers/arc_timer: Eliminate " tip-bot2 for Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1557caaa-9f90-7613-4627-5c5f59d047fa@kernel.org \
--to=vgupta@kernel.org \
--cc=Shahab.Vahedi@synopsys.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
--cc=rdunlap@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).