* [PATCH] ARM: dts: aspeed: Add Mihawk BMC platform
@ 2019-07-30 6:00 Ben Pai
2019-07-31 0:51 ` Andrew Jeffery
0 siblings, 1 reply; 3+ messages in thread
From: Ben Pai @ 2019-07-30 6:00 UTC (permalink / raw)
To: robh+dt, mark.rutland, joel, andrew, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: wangat, Ben Pai
The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an
OpenPower Power9 server.
This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 922 ++++++++++++++++++++
2 files changed, 923 insertions(+)
create mode 100755 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eb6de52c1936..262345544359 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1281,5 +1281,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-vesnin.dtb \
aspeed-bmc-opp-witherspoon.dtb \
aspeed-bmc-opp-zaius.dtb \
+ aspeed-bmc-opp-mihawk.dtb \
aspeed-bmc-portwell-neptune.dtb \
aspeed-bmc-quanta-q71l.dtb
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
new file mode 100755
index 000000000000..cfa20e0b2939
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -0,0 +1,922 @@
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Mihawk BMC";
+ compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
+
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>; /* address and size of RAM(512MB) */
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32MM */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ air-water {
+ label = "air-water";
+ gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 6)>;
+ };
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 2)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 0)>;
+ };
+ id-button {
+ label = "id-button";
+ gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+ linux,code = <9>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+ linux,code = <10>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+ linux,code = <11>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+ linux,code = <12>;
+ };
+
+ fan4-presence {
+ label = "fan4-presence";
+ gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+ linux,code = <13>;
+ };
+
+ fan5-presence {
+ label = "fan5-presence";
+ gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
+ linux,code = <14>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-id {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-g {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-ok {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ fan0 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+ };
+
+ fan4 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+ };
+
+ fan5 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+ iio-hwmon-12v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>;
+ };
+
+ iio-hwmon-5v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 1>;
+ };
+
+ iio-hwmon-3v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 2>;
+ };
+
+ iio-hwmon-vdd0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 3>;
+ };
+
+ iio-hwmon-vdd1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 4>;
+ };
+
+ iio-hwmon-vcs0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 5>;
+ };
+
+ iio-hwmon-vcs1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 6>;
+ };
+
+ iio-hwmon-vdn0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ iio-hwmon-vdn1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 8>;
+ };
+
+ iio-hwmon-vio0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 9>;
+ };
+
+ iio-hwmon-vio1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 10>;
+ };
+
+ iio-hwmon-vddra {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 11>;
+ };
+
+ iio-hwmon-vddrb {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 13>;
+ };
+
+ iio-hwmon-vddrc {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 14>;
+ };
+
+ iio-hwmon-vddrd {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ /*compatible = "aspeed,ast2500-pwm-tacho";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x1e786000 0x1000>;
+ clocks = <&pwm_tacho_fixed_clk>;*/
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan@8 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@9 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan@10 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan@11 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "obmc-ubi";
+ };
+ };
+ };
+ flash@1 {
+ status = "okay";
+ label = "alt-bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "alt-u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "alt-u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "alt-obmc-ubi";
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* APSS */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "disabled";
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* SAMTEC P0 */
+ /* SAMTEC P1 */
+
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* APSS */
+ /* CPLD */
+
+ /* PCA9516 (repeater) ->
+ * CLK Buffer 9FGS9092
+ * CLK Buffer 9DBL0651BKILFT
+ * CLK Buffer 9DBL0651BKILFT
+ * Power Supply 0
+ * Power Supply 1
+ * PCA 9552 LED
+ */
+
+ power-supply@58 {
+ compatible = "ibm,cffps1";
+ reg = <0x58>;
+ };
+
+ power-supply@5b {
+ compatible = "ibm,cffps1";
+ reg = <0x5b>;
+ };
+
+ pca9552: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ };
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* CP0 VDD & VCS : IR35221 */
+ /* CP0 VDN : IR35221 */
+ /* CP0 VIO : IR38064 */
+ /* CP0 VDDR : PXM1330 */
+
+ ir35221@70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221@72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+
+};
+
+&i2c5 {
+ status = "okay";
+
+ /* CP0 VDD & VCS : IR35221 */
+ /* CP0 VDN : IR35221 */
+ /* CP0 VIO : IR38064 */
+ /* CP0 VDDR : PXM1330 */
+
+ ir35221@70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221@72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+
+};
+
+&i2c6 {
+ status = "okay";
+
+ /* pca9548 -> NVMe1 to 8 */
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* pca9548 -> NVMe9 to 16 */
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* FSI CLK/DAT */
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ /* pca9545 Riser ->
+ * PCIe x8 Slot3
+ * PCIe x16 slot4
+ * PCIe x8 slot5
+ * I2C BMC RISER PCA9554
+ * BMC SCL/SDA PCA9554
+ * PCA9554
+ */
+
+ /* pca9545 ->
+ * PCIe x16 Slot1
+ * PCIe x8 slot2
+ * PEX8748
+ */
+
+ pca9545riser@70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pca9545@71 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ /* pca9545 Riser ->
+ * PCIe x8 Slot8
+ * PCIe x16 slot9
+ * PCIe x8 slot10
+ * I2C BMC RISER PCA9554
+ * BMC SCL/SDA PCA9554
+ * PCA9554
+ */
+
+ /* pca9545 ->
+ * PCIe x16 Slot1
+ * PCIe x8 slot2
+ * PEX8748
+ */
+
+ pca9545riser@70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pca9545@71 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /* TPM */
+ /* RTC RX8900CE */
+ /* FPGA for power sequence */
+ /* TMP275A */
+ /* TMP275A */
+ /* EMC1462 */
+
+ tpm@57 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x57>;
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tmp275@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ /* chip emc1462 use emc1403 driver */
+ emc1403@4c {
+ compatible = "smsc,emc1403";
+ reg = <0x4c>;
+ };
+
+};
+
+&i2c12 {
+ status = "okay";
+
+ /* pca9545 ->
+ * SAS BP1
+ * SAS BP2
+ * NVMe BP
+ * M.2 riser
+ */
+
+ pca9545@70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+ };
+
+ };
+
+};
+
+&i2c13 {
+ status = "okay";
+
+ /* pca9548 ->
+ * NVMe BP
+ * NVMe HDD17 to 24
+ */
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&adc {
+ status = "okay";
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ aspeed,alt-boot;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
\ No newline at end of file
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: Add Mihawk BMC platform
2019-07-30 6:00 [PATCH] ARM: dts: aspeed: Add Mihawk BMC platform Ben Pai
@ 2019-07-31 0:51 ` Andrew Jeffery
0 siblings, 0 replies; 3+ messages in thread
From: Andrew Jeffery @ 2019-07-31 0:51 UTC (permalink / raw)
To: Ben Pai, Rob Herring, mark.rutland, Joel Stanley, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: wangat
Hello Ben,
Thanks for the patch! Some minor comments below.
On Tue, 30 Jul 2019, at 15:30, Ben Pai wrote:
> The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an
> OpenPower Power9 server.
>
> This adds the device tree description for most upstream components. It
> is a squashed commit from the OpenBMC kernel tree.
That it's a squashed commit isn't relevant, neither is the mention of the OpenBMC
kernel tree. I'd drop both from the commit message.
>
> Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 922 ++++++++++++++++++++
> 2 files changed, 923 insertions(+)
> create mode 100755 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index eb6de52c1936..262345544359 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1281,5 +1281,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-opp-vesnin.dtb \
> aspeed-bmc-opp-witherspoon.dtb \
> aspeed-bmc-opp-zaius.dtb \
> + aspeed-bmc-opp-mihawk.dtb \
> aspeed-bmc-portwell-neptune.dtb \
> aspeed-bmc-quanta-q71l.dtb
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> new file mode 100755
> index 000000000000..cfa20e0b2939
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> @@ -0,0 +1,922 @@
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +
> +/ {
> + model = "Mihawk BMC";
> + compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
I think this should be "ips,mihawk-bmc". You may also need to add "ips" to the
vendor-prefixes list.
> +
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>; /* address and size of RAM(512MB) */
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + flash_memory: region@98000000 {
> + no-map;
> + reg = <0x98000000 0x04000000>; /* 64M */
> + };
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_engine_memory: jpegbuffer {
> + size = <0x02000000>; /* 32MM */
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + air-water {
> + label = "air-water";
> + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 6)>;
> + };
> +
> + checkstop {
> + label = "checkstop";
> + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(J, 2)>;
> + };
> +
> + ps0-presence {
> + label = "ps0-presence";
> + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Z, 2)>;
> + };
> +
> + ps1-presence {
> + label = "ps1-presence";
> + gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Z, 0)>;
> + };
> + id-button {
> + label = "id-button";
> + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 1)>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
Please remove the #address-cells and #size-cells properties, they aren't
relevant for gpio-keys-polled.
> + poll-interval = <1000>;
> +
> + fan0-presence {
> + label = "fan0-presence";
> + gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
> + linux,code = <9>;
> + };
> +
> + fan1-presence {
> + label = "fan1-presence";
> + gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
> + linux,code = <10>;
> + };
> +
> + fan2-presence {
> + label = "fan2-presence";
> + gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
> + linux,code = <11>;
> + };
> +
> + fan3-presence {
> + label = "fan3-presence";
> + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
> + linux,code = <12>;
> + };
> +
> + fan4-presence {
> + label = "fan4-presence";
> + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
> + linux,code = <13>;
> + };
> +
> + fan5-presence {
> + label = "fan5-presence";
> + gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
> + linux,code = <14>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + fault {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
> + };
> +
> + power {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-id {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-g {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-ok {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
> + };
> +
> + fan0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan1 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan2 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan3 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan4 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan5 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + fsi: gpio-fsi {
> + compatible = "fsi-master-gpio", "fsi-master";
> + #address-cells = <2>;
> + #size-cells = <0>;
> + no-gpio-delays;
> +
> + clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
> + mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
> + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> + };
> + iio-hwmon-12v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>;
> + };
> +
> + iio-hwmon-5v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 1>;
> + };
> +
> + iio-hwmon-3v {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 2>;
> + };
> +
> + iio-hwmon-vdd0 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 3>;
> + };
> +
> + iio-hwmon-vdd1 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 4>;
> + };
> +
> + iio-hwmon-vcs0 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 5>;
> + };
> +
> + iio-hwmon-vcs1 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 6>;
> + };
> +
> + iio-hwmon-vdn0 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 7>;
> + };
> +
> + iio-hwmon-vdn1 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 8>;
> + };
> +
> + iio-hwmon-vio0 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 9>;
> + };
> +
> + iio-hwmon-vio1 {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 10>;
> + };
> +
> + iio-hwmon-vddra {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 11>;
> + };
> +
> + iio-hwmon-vddrb {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 13>;
> + };
> +
> + iio-hwmon-vddrc {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 14>;
> + };
> +
> + iio-hwmon-vddrd {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 15>;
> + };
> +
> + iio-hwmon-battery {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 12>;
> + };
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + /*compatible = "aspeed,ast2500-pwm-tacho";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x1e786000 0x1000>;
> + clocks = <&pwm_tacho_fixed_clk>;*/
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default &pinctrl_pwm5_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> + };
> +
> + fan@5 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> + };
> +
> + fan@6 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> + };
> +
> + fan@7 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> + };
> +
> + fan@8 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08>;
> + };
> +
> + fan@9 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x09>;
> + };
> +
> + fan@10 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
> + };
> +
> + fan@11 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + label = "bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + partitions {
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + compatible = "fixed-partitions";
> + u-boot@0 {
> + reg = < 0 0x60000 >;
> + label = "u-boot";
> + };
> + u-boot-env@60000 {
> + reg = < 0x60000 0x20000 >;
> + label = "u-boot-env";
> + };
> + obmc-ubi@80000 {
> + reg = < 0x80000 0x1F80000 >;
> + label = "obmc-ubi";
> + };
> + };
> + };
> + flash@1 {
> + status = "okay";
> + label = "alt-bmc";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + partitions {
> + #address-cells = < 1 >;
> + #size-cells = < 1 >;
> + compatible = "fixed-partitions";
> + u-boot@0 {
> + reg = < 0 0x60000 >;
> + label = "alt-u-boot";
> + };
> + u-boot-env@60000 {
> + reg = < 0x60000 0x20000 >;
> + label = "alt-u-boot-env";
> + };
> + obmc-ubi@80000 {
> + reg = < 0x80000 0x1F80000 >;
> + label = "alt-obmc-ubi";
> + };
> + };
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> + memory-region = <&flash_memory>;
> + flash = <&spi1>;
> +};
> +
> +&uart1 {
> + /* Rear RS-232 connector */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default
> + &pinctrl_nrts1_default
> + &pinctrl_ndtr1_default
> + &pinctrl_ndsr1_default
> + &pinctrl_ncts1_default
> + &pinctrl_ndcd1_default
> + &pinctrl_nri1_default>;
> +};
> +
> +&uart2 {
> + /* APSS */
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + use-ncsi;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&i2c0 {
> + status = "disabled";
> +};
> +
> +&i2c1 {
> + status = "disabled";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + /* SAMTEC P0 */
> + /* SAMTEC P1 */
> +
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + /* APSS */
> + /* CPLD */
> +
> + /* PCA9516 (repeater) ->
> + * CLK Buffer 9FGS9092
> + * CLK Buffer 9DBL0651BKILFT
> + * CLK Buffer 9DBL0651BKILFT
> + * Power Supply 0
> + * Power Supply 1
> + * PCA 9552 LED
> + */
> +
> + power-supply@58 {
> + compatible = "ibm,cffps1";
> + reg = <0x58>;
> + };
> +
> + power-supply@5b {
> + compatible = "ibm,cffps1";
> + reg = <0x5b>;
> + };
> +
> + pca9552: pca9552@60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + gpio@15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + };
> +
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + /* CP0 VDD & VCS : IR35221 */
> + /* CP0 VDN : IR35221 */
> + /* CP0 VIO : IR38064 */
> + /* CP0 VDDR : PXM1330 */
> +
> + ir35221@70 {
> + compatible = "infineon,ir35221";
> + reg = <0x70>;
> + };
> +
> + ir35221@72 {
> + compatible = "infineon,ir35221";
> + reg = <0x72>;
> + };
> +
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + /* CP0 VDD & VCS : IR35221 */
> + /* CP0 VDN : IR35221 */
> + /* CP0 VIO : IR38064 */
> + /* CP0 VDDR : PXM1330 */
> +
> + ir35221@70 {
> + compatible = "infineon,ir35221";
> + reg = <0x70>;
> + };
> +
> + ir35221@72 {
> + compatible = "infineon,ir35221";
> + reg = <0x72>;
> + };
> +
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + /* pca9548 -> NVMe1 to 8 */
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + };
> +
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + /* pca9548 -> NVMe9 to 16 */
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + };
> +
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + /* FSI CLK/DAT */
This comment doesn't make sense?
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> +
> + /* pca9545 Riser ->
> + * PCIe x8 Slot3
> + * PCIe x16 slot4
> + * PCIe x8 slot5
> + * I2C BMC RISER PCA9554
> + * BMC SCL/SDA PCA9554
> + * PCA9554
> + */
> +
> + /* pca9545 ->
> + * PCIe x16 Slot1
> + * PCIe x8 slot2
> + * PEX8748
> + */
> +
> + pca9545riser@70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
> + i2c-mux-idle-disconnect;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pca9545@71 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x71>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
> + i2c-mux-idle-disconnect;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&i2c10 {
> + status = "okay";
> +
> + /* pca9545 Riser ->
> + * PCIe x8 Slot8
> + * PCIe x16 slot9
> + * PCIe x8 slot10
> + * I2C BMC RISER PCA9554
> + * BMC SCL/SDA PCA9554
> + * PCA9554
> + */
> +
> + /* pca9545 ->
> + * PCIe x16 Slot1
> + * PCIe x8 slot2
> + * PEX8748
> + */
> +
> + pca9545riser@70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
Remove the commented properties.
> + i2c-mux-idle-disconnect;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pca9545@71 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x71>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
Again here.
> + i2c-mux-idle-disconnect;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + /* TPM */
> + /* RTC RX8900CE */
> + /* FPGA for power sequence */
> + /* TMP275A */
> + /* TMP275A */
> + /* EMC1462 */
> +
> + tpm@57 {
> + compatible = "infineon,slb9645tt";
> + reg = <0x57>;
> + };
> +
> + rtc@32 {
> + compatible = "epson,rx8900";
> + reg = <0x32>;
> + };
> +
> + tmp275@48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275@49 {
> + compatible = "ti,tmp275";
> + reg = <0x49>;
> + };
> +
> + /* chip emc1462 use emc1403 driver */
> + emc1403@4c {
> + compatible = "smsc,emc1403";
> + reg = <0x4c>;
> + };
> +
> +};
> +
> +&i2c12 {
> + status = "okay";
> +
> + /* pca9545 ->
> + * SAS BP1
> + * SAS BP2
> + * NVMe BP
> + * M.2 riser
> + */
> +
> + pca9545@70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> +
> + /*interrupt-parent = <&ipic>;*/
> + /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <2>;
> +
> + eeprom@50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> + };
> +
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> +
> + tmp275@48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> + };
> +
> + };
> +
> +};
> +
> +&i2c13 {
> + status = "okay";
> +
> + /* pca9548 ->
> + * NVMe BP
> + * NVMe HDD17 to 24
> + */
> +
> + pca9548@70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + };
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&pinctrl {
> + aspeed,external-nodes = <&gfx &lhc>;
This is already provided by aspeed-g5.dtsi, please drop it.
> +};
> +
> +&adc {
> + status = "okay";
Please add the pinmux properties to mux the ADC lines that you're using
> +};
> +
> +&wdt1 {
> + aspeed,reset-type = "none";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> +};
> +
> +&wdt2 {
> + aspeed,alt-boot;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&video {
> + status = "okay";
> + memory-region = <&video_engine_memory>;
> +};
> +
> +#include "ibm-power9-dual.dtsi"
> \ No newline at end of file
Add a newline here to avoid the warning.
> --
> 2.17.1
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
> This email contains confidential or legally privileged information and
> is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or
> the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and
> should delete this e-mail immediately.
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
>
Please try to avoid posting footers like this to public mailing lists.
Cheers,
Andrew
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] ARM: dts: aspeed: Add Mihawk BMC platform
@ 2019-07-17 10:46 Ben Pai
0 siblings, 0 replies; 3+ messages in thread
From: Ben Pai @ 2019-07-17 10:46 UTC (permalink / raw)
To: linux-kernel; +Cc: Ben Pai
The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an
OpenPower Power9 server.
This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 922 ++++++++++++++++++++
2 files changed, 923 insertions(+)
create mode 100755 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dab2914fa293..5368d657781e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1274,5 +1274,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-romulus.dtb \
aspeed-bmc-opp-witherspoon.dtb \
aspeed-bmc-opp-zaius.dtb \
+ aspeed-bmc-opp-mihawk.dtb \
aspeed-bmc-portwell-neptune.dtb \
aspeed-bmc-quanta-q71l.dtb
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
new file mode 100755
index 000000000000..cfa20e0b2939
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -0,0 +1,922 @@
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Mihawk BMC";
+ compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
+
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>; /* address and size of RAM(512MB) */
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32MM */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ air-water {
+ label = "air-water";
+ gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 6)>;
+ };
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 2)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 0)>;
+ };
+ id-button {
+ label = "id-button";
+ gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+ linux,code = <9>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+ linux,code = <10>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+ linux,code = <11>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+ linux,code = <12>;
+ };
+
+ fan4-presence {
+ label = "fan4-presence";
+ gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+ linux,code = <13>;
+ };
+
+ fan5-presence {
+ label = "fan5-presence";
+ gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
+ linux,code = <14>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-id {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-g {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-ok {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ fan0 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+ };
+
+ fan4 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+ };
+
+ fan5 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+ iio-hwmon-12v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>;
+ };
+
+ iio-hwmon-5v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 1>;
+ };
+
+ iio-hwmon-3v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 2>;
+ };
+
+ iio-hwmon-vdd0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 3>;
+ };
+
+ iio-hwmon-vdd1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 4>;
+ };
+
+ iio-hwmon-vcs0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 5>;
+ };
+
+ iio-hwmon-vcs1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 6>;
+ };
+
+ iio-hwmon-vdn0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ iio-hwmon-vdn1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 8>;
+ };
+
+ iio-hwmon-vio0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 9>;
+ };
+
+ iio-hwmon-vio1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 10>;
+ };
+
+ iio-hwmon-vddra {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 11>;
+ };
+
+ iio-hwmon-vddrb {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 13>;
+ };
+
+ iio-hwmon-vddrc {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 14>;
+ };
+
+ iio-hwmon-vddrd {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ /*compatible = "aspeed,ast2500-pwm-tacho";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x1e786000 0x1000>;
+ clocks = <&pwm_tacho_fixed_clk>;*/
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan@8 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@9 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan@10 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan@11 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "obmc-ubi";
+ };
+ };
+ };
+ flash@1 {
+ status = "okay";
+ label = "alt-bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "alt-u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "alt-u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "alt-obmc-ubi";
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* APSS */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "disabled";
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* SAMTEC P0 */
+ /* SAMTEC P1 */
+
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* APSS */
+ /* CPLD */
+
+ /* PCA9516 (repeater) ->
+ * CLK Buffer 9FGS9092
+ * CLK Buffer 9DBL0651BKILFT
+ * CLK Buffer 9DBL0651BKILFT
+ * Power Supply 0
+ * Power Supply 1
+ * PCA 9552 LED
+ */
+
+ power-supply@58 {
+ compatible = "ibm,cffps1";
+ reg = <0x58>;
+ };
+
+ power-supply@5b {
+ compatible = "ibm,cffps1";
+ reg = <0x5b>;
+ };
+
+ pca9552: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ };
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* CP0 VDD & VCS : IR35221 */
+ /* CP0 VDN : IR35221 */
+ /* CP0 VIO : IR38064 */
+ /* CP0 VDDR : PXM1330 */
+
+ ir35221@70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221@72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+
+};
+
+&i2c5 {
+ status = "okay";
+
+ /* CP0 VDD & VCS : IR35221 */
+ /* CP0 VDN : IR35221 */
+ /* CP0 VIO : IR38064 */
+ /* CP0 VDDR : PXM1330 */
+
+ ir35221@70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221@72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+
+};
+
+&i2c6 {
+ status = "okay";
+
+ /* pca9548 -> NVMe1 to 8 */
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* pca9548 -> NVMe9 to 16 */
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* FSI CLK/DAT */
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ /* pca9545 Riser ->
+ * PCIe x8 Slot3
+ * PCIe x16 slot4
+ * PCIe x8 slot5
+ * I2C BMC RISER PCA9554
+ * BMC SCL/SDA PCA9554
+ * PCA9554
+ */
+
+ /* pca9545 ->
+ * PCIe x16 Slot1
+ * PCIe x8 slot2
+ * PEX8748
+ */
+
+ pca9545riser@70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pca9545@71 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ /* pca9545 Riser ->
+ * PCIe x8 Slot8
+ * PCIe x16 slot9
+ * PCIe x8 slot10
+ * I2C BMC RISER PCA9554
+ * BMC SCL/SDA PCA9554
+ * PCA9554
+ */
+
+ /* pca9545 ->
+ * PCIe x16 Slot1
+ * PCIe x8 slot2
+ * PEX8748
+ */
+
+ pca9545riser@70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pca9545@71 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /* TPM */
+ /* RTC RX8900CE */
+ /* FPGA for power sequence */
+ /* TMP275A */
+ /* TMP275A */
+ /* EMC1462 */
+
+ tpm@57 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x57>;
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tmp275@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ /* chip emc1462 use emc1403 driver */
+ emc1403@4c {
+ compatible = "smsc,emc1403";
+ reg = <0x4c>;
+ };
+
+};
+
+&i2c12 {
+ status = "okay";
+
+ /* pca9545 ->
+ * SAS BP1
+ * SAS BP2
+ * NVMe BP
+ * M.2 riser
+ */
+
+ pca9545@70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ /*interrupt-parent = <&ipic>;*/
+ /*interrupts = <17 IRQ_TYPE_LEVEL_LOW>;*/
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+ };
+
+ };
+
+};
+
+&i2c13 {
+ status = "okay";
+
+ /* pca9548 ->
+ * NVMe BP
+ * NVMe HDD17 to 24
+ */
+
+ pca9548@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&adc {
+ status = "okay";
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ aspeed,alt-boot;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
\ No newline at end of file
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-07-31 0:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-30 6:00 [PATCH] ARM: dts: aspeed: Add Mihawk BMC platform Ben Pai
2019-07-31 0:51 ` Andrew Jeffery
-- strict thread matches above, loose matches on Subject: below --
2019-07-17 10:46 Ben Pai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).