[PATCH V5 02/11] misc: xilinx-sdfec: add core driver

[Dragan Cvetic <dragan.cvetic@xilinx.com>]

Implement a platform driver that matches with xlnx,
sd-fec-1.1 device tree node and registers as a character
device, including:
- SD-FEC driver binds to sdfec DT node.
- creates and initialise an initial driver dev structure.
- add the driver in Linux build and Kconfig.

Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com>
Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
---
 drivers/misc/Kconfig        |  12 +++++
 drivers/misc/Makefile       |   1 +
 drivers/misc/xilinx_sdfec.c | 118 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 131 insertions(+)
 create mode 100644 drivers/misc/xilinx_sdfec.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6b0417b..319a6bf 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -471,6 +471,18 @@ config PCI_ENDPOINT_TEST
            Enable this configuration option to enable the host side test driver
            for PCI Endpoint.
 
+config XILINX_SDFEC
+	tristate "Xilinx SDFEC 16"
+	help
+	  This option enables support for the Xilinx SDFEC (Soft Decision
+	  Forward Error Correction) driver. This enables a char driver
+	  for the SDFEC.
+
+	  You may select this driver if your design instantiates the
+	  SDFEC(16nm) hardened block. To compile this as a module choose M.
+
+	  If unsure, say N.
+
 config MISC_RTSX
 	tristate
 	default MISC_RTSX_PCI || MISC_RTSX_USB
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index b9affcd..0cb3546 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -59,3 +59,4 @@ obj-$(CONFIG_OCXL)		+= ocxl/
 obj-y				+= cardreader/
 obj-$(CONFIG_PVPANIC)   	+= pvpanic.o
 obj-$(CONFIG_HABANA_AI)		+= habanalabs/
+obj-$(CONFIG_XILINX_SDFEC)	+= xilinx_sdfec.o
diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
new file mode 100644
index 0000000..75cc980
--- /dev/null
+++ b/drivers/misc/xilinx_sdfec.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx SDFEC
+ *
+ * Copyright (C) 2019 Xilinx, Inc.
+ *
+ * Description:
+ * This driver is developed for SDFEC16 (Soft Decision FEC 16nm)
+ * IP. It exposes a char device which supports file operations
+ * like  open(), close() and ioctl().
+ */
+
+#include <linux/miscdevice.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+static int xsdfec_ndevs;
+
+/**
+ * struct xsdfec_dev - Driver data for SDFEC
+ * @regs: device physical base address
+ * @dev: pointer to device struct
+ * @miscdev: Misc device handle
+ * @error_data_lock: Error counter and states spinlock
+ *
+ * This structure contains necessary state for SDFEC driver to operate
+ */
+struct xsdfec_dev {
+	void __iomem *regs;
+	struct device *dev;
+	struct miscdevice miscdev;
+	/* Spinlock to protect state_updated and stats_updated */
+	spinlock_t error_data_lock;
+};
+
+static const struct file_operations xsdfec_fops = {
+	.owner = THIS_MODULE,
+};
+
+static int xsdfec_probe(struct platform_device *pdev)
+{
+	struct xsdfec_dev *xsdfec;
+	struct device *dev;
+	struct resource *res;
+	int err;
+	char buf[16];
+
+	xsdfec = devm_kzalloc(&pdev->dev, sizeof(*xsdfec), GFP_KERNEL);
+	if (!xsdfec)
+		return -ENOMEM;
+
+	xsdfec->dev = &pdev->dev;
+	spin_lock_init(&xsdfec->error_data_lock);
+
+	dev = xsdfec->dev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	xsdfec->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(xsdfec->regs)) {
+		err = PTR_ERR(xsdfec->regs);
+		return err;
+	}
+
+	/* Save driver private data */
+	platform_set_drvdata(pdev, xsdfec);
+
+	snprintf(buf, 16, "xsdfec%d", xsdfec_ndevs);
+	xsdfec->miscdev.minor = MISC_DYNAMIC_MINOR;
+	xsdfec->miscdev.name = buf;
+	xsdfec->miscdev.fops = &xsdfec_fops;
+	xsdfec->miscdev.parent = dev;
+	err = misc_register(&xsdfec->miscdev);
+	if (err) {
+		dev_err(dev, "error:%d. Unable to register device", err);
+		return err;
+	}
+
+	xsdfec_ndevs += 1;
+	return 0;
+}
+
+static int xsdfec_remove(struct platform_device *pdev)
+{
+	struct xsdfec_dev *xsdfec;
+
+	xsdfec = platform_get_drvdata(pdev);
+	misc_deregister(&xsdfec->miscdev);
+	xsdfec_ndevs -= 1;
+	return 0;
+}
+
+static const struct of_device_id xsdfec_of_match[] = {
+	{
+		.compatible = "xlnx,sd-fec-1.1",
+	},
+	{ /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, xsdfec_of_match);
+
+static struct platform_driver xsdfec_driver = {
+	.driver = {
+		.name = "xilinx-sdfec",
+		.of_match_table = xsdfec_of_match,
+	},
+	.probe = xsdfec_probe,
+	.remove =  xsdfec_remove,
+};
+
+module_platform_driver(xsdfec_driver);
+
+MODULE_AUTHOR("Xilinx, Inc");
+MODULE_DESCRIPTION("Xilinx SD-FEC16 Driver");
+MODULE_LICENSE("GPL");
-- 
2.7.4