From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Eric Auger <eric.auger@redhat.com>,
Alex Williamson <alex.williamson@redhat.com>,
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: "Yi Liu" <yi.l.liu@intel.com>,
"Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
"Christoph Hellwig" <hch@infradead.org>,
"Lu Baolu" <baolu.lu@linux.intel.com>,
Andriy Shevchenko <andriy.shevchenko@linux.intel.com>,
Jacob Pan <jacob.jun.pan@linux.intel.com>,
Liu@vger.kernel.org, Yi L <yi.l.liu@linux.intel.com>
Subject: [PATCH v4 02/22] iommu: Introduce device fault data
Date: Sun, 9 Jun 2019 06:44:02 -0700 [thread overview]
Message-ID: <1560087862-57608-3-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1560087862-57608-1-git-send-email-jacob.jun.pan@linux.intel.com>
Device faults detected by IOMMU can be reported outside the IOMMU
subsystem for further processing. This patch introduces
a generic device fault data structure.
The fault can be either an unrecoverable fault or a page request,
also referred to as a recoverable fault.
We only care about non internal faults that are likely to be reported
to an external subsystem.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
include/linux/iommu.h | 44 +++++++++++++++++
include/uapi/linux/iommu.h | 118 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 162 insertions(+)
create mode 100644 include/uapi/linux/iommu.h
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index a815cf6..7890a92 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -25,6 +25,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/of.h>
+#include <uapi/linux/iommu.h>
#define IOMMU_READ (1 << 0)
#define IOMMU_WRITE (1 << 1)
@@ -49,6 +50,7 @@ struct device;
struct iommu_domain;
struct notifier_block;
struct iommu_sva;
+struct iommu_fault_event;
/* iommu fault flags */
#define IOMMU_FAULT_READ 0x0
@@ -58,6 +60,7 @@ typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
struct device *, unsigned long, int, void *);
typedef int (*iommu_mm_exit_handler_t)(struct device *dev, struct iommu_sva *,
void *);
+typedef int (*iommu_dev_fault_handler_t)(struct iommu_fault_event *, void *);
struct iommu_domain_geometry {
dma_addr_t aperture_start; /* First address that can be mapped */
@@ -301,6 +304,46 @@ struct iommu_device {
struct device *dev;
};
+/**
+ * struct iommu_fault_event - Generic fault event
+ *
+ * Can represent recoverable faults such as a page requests or
+ * unrecoverable faults such as DMA or IRQ remapping faults.
+ *
+ * @fault: fault descriptor
+ * @iommu_private: used by the IOMMU driver for storing fault-specific
+ * data. Users should not modify this field before
+ * sending the fault response.
+ */
+struct iommu_fault_event {
+ struct iommu_fault fault;
+ u64 iommu_private;
+};
+
+/**
+ * struct iommu_fault_param - per-device IOMMU fault data
+ * @dev_fault_handler: Callback function to handle IOMMU faults at device level
+ * @data: handler private data
+ *
+ */
+struct iommu_fault_param {
+ iommu_dev_fault_handler_t handler;
+ void *data;
+};
+
+/**
+ * struct iommu_param - collection of per-device IOMMU data
+ *
+ * @fault_param: IOMMU detected device fault reporting data
+ *
+ * TODO: migrate other per device data pointers under iommu_dev_data, e.g.
+ * struct iommu_group *iommu_group;
+ * struct iommu_fwspec *iommu_fwspec;
+ */
+struct iommu_param {
+ struct iommu_fault_param *fault_param;
+};
+
int iommu_device_register(struct iommu_device *iommu);
void iommu_device_unregister(struct iommu_device *iommu);
int iommu_device_sysfs_add(struct iommu_device *iommu,
@@ -504,6 +547,7 @@ struct iommu_ops {};
struct iommu_group {};
struct iommu_fwspec {};
struct iommu_device {};
+struct iommu_fault_param {};
static inline bool iommu_present(struct bus_type *bus)
{
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
new file mode 100644
index 0000000..aaa3b6a
--- /dev/null
+++ b/include/uapi/linux/iommu.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * IOMMU user API definitions
+ */
+
+#ifndef _UAPI_IOMMU_H
+#define _UAPI_IOMMU_H
+
+#include <linux/types.h>
+
+#define IOMMU_FAULT_PERM_READ (1 << 0) /* read */
+#define IOMMU_FAULT_PERM_WRITE (1 << 1) /* write */
+#define IOMMU_FAULT_PERM_EXEC (1 << 2) /* exec */
+#define IOMMU_FAULT_PERM_PRIV (1 << 3) /* privileged */
+
+/* Generic fault types, can be expanded IRQ remapping fault */
+enum iommu_fault_type {
+ IOMMU_FAULT_DMA_UNRECOV = 1, /* unrecoverable fault */
+ IOMMU_FAULT_PAGE_REQ, /* page request fault */
+};
+
+enum iommu_fault_reason {
+ IOMMU_FAULT_REASON_UNKNOWN = 0,
+
+ /* Could not access the PASID table (fetch caused external abort) */
+ IOMMU_FAULT_REASON_PASID_FETCH,
+
+ /* PASID entry is invalid or has configuration errors */
+ IOMMU_FAULT_REASON_BAD_PASID_ENTRY,
+
+ /*
+ * PASID is out of range (e.g. exceeds the maximum PASID
+ * supported by the IOMMU) or disabled.
+ */
+ IOMMU_FAULT_REASON_PASID_INVALID,
+
+ /*
+ * An external abort occurred fetching (or updating) a translation
+ * table descriptor
+ */
+ IOMMU_FAULT_REASON_WALK_EABT,
+
+ /*
+ * Could not access the page table entry (Bad address),
+ * actual translation fault
+ */
+ IOMMU_FAULT_REASON_PTE_FETCH,
+
+ /* Protection flag check failed */
+ IOMMU_FAULT_REASON_PERMISSION,
+
+ /* access flag check failed */
+ IOMMU_FAULT_REASON_ACCESS,
+
+ /* Output address of a translation stage caused Address Size fault */
+ IOMMU_FAULT_REASON_OOR_ADDRESS,
+};
+
+/**
+ * struct iommu_fault_unrecoverable - Unrecoverable fault data
+ * @reason: reason of the fault, from &enum iommu_fault_reason
+ * @flags: parameters of this fault (IOMMU_FAULT_UNRECOV_* values)
+ * @pasid: Process Address Space ID
+ * @perm: Requested permission access using by the incoming transaction
+ * (IOMMU_FAULT_PERM_* values)
+ * @addr: offending page address
+ * @fetch_addr: address that caused a fetch abort, if any
+ */
+struct iommu_fault_unrecoverable {
+ __u32 reason;
+#define IOMMU_FAULT_UNRECOV_PASID_VALID (1 << 0)
+#define IOMMU_FAULT_UNRECOV_ADDR_VALID (1 << 1)
+#define IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID (1 << 2)
+ __u32 flags;
+ __u32 pasid;
+ __u32 perm;
+ __u64 addr;
+ __u64 fetch_addr;
+};
+
+/**
+ * struct iommu_fault_page_request - Page Request data
+ * @flags: encodes whether the corresponding fields are valid and whether this
+ * is the last page in group (IOMMU_FAULT_PAGE_REQUEST_* values)
+ * @pasid: Process Address Space ID
+ * @grpid: Page Request Group Index
+ * @perm: requested page permissions (IOMMU_FAULT_PERM_* values)
+ * @addr: page address
+ * @private_data: device-specific private information
+ */
+struct iommu_fault_page_request {
+#define IOMMU_FAULT_PAGE_REQUEST_PASID_VALID (1 << 0)
+#define IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE (1 << 1)
+#define IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA (1 << 2)
+ __u32 flags;
+ __u32 pasid;
+ __u32 grpid;
+ __u32 perm;
+ __u64 addr;
+ __u64 private_data[2];
+};
+
+/**
+ * struct iommu_fault - Generic fault data
+ * @type: fault type from &enum iommu_fault_type
+ * @padding: reserved for future use (should be zero)
+ * @event: Fault event, when @type is %IOMMU_FAULT_DMA_UNRECOV
+ * @prm: Page Request message, when @type is %IOMMU_FAULT_PAGE_REQ
+ */
+struct iommu_fault {
+ __u32 type;
+ __u32 padding;
+ union {
+ struct iommu_fault_unrecoverable event;
+ struct iommu_fault_page_request prm;
+ };
+};
+#endif /* _UAPI_IOMMU_H */
--
2.7.4
next prev parent reply other threads:[~2019-06-09 13:42 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 13:44 [PATCH v4 00/22] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-06-09 13:44 ` [PATCH v4 01/22] driver core: Add per device iommu param Jacob Pan
2019-06-09 13:44 ` Jacob Pan [this message]
2019-06-18 15:42 ` [PATCH v4 02/22] iommu: Introduce device fault data Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 03/22] iommu: Introduce device fault report API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 04/22] iommu: Add recoverable fault reporting Jacob Pan
2019-06-18 15:44 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 05/22] iommu: Add a timeout parameter for PRQ response Jacob Pan
2019-06-09 13:44 ` [PATCH v4 06/22] trace/iommu: Add sva trace events Jacob Pan
2019-06-09 13:44 ` [PATCH v4 07/22] iommu: Use device fault trace event Jacob Pan
2019-06-09 13:44 ` [PATCH v4 08/22] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-24 15:06 ` Auger Eric
2019-06-24 15:23 ` Jean-Philippe Brucker
2019-06-09 13:44 ` [PATCH v4 09/22] iommu: Introduce cache_invalidate API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 10/22] iommu: Fix compile error without IOMMU_API Jacob Pan
2019-06-18 14:10 ` Jonathan Cameron
2019-06-24 22:28 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 11/22] iommu: Introduce guest PASID bind function Jacob Pan
2019-06-18 15:36 ` Jean-Philippe Brucker
2019-06-24 22:24 ` Jacob Pan
2019-07-16 16:44 ` Auger Eric
2019-08-05 21:02 ` Jacob Pan
2019-08-05 23:13 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 12/22] iommu: Add I/O ASID allocator Jacob Pan
2019-06-18 16:50 ` Jonathan Cameron
2019-06-25 18:55 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 13/22] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-07-16 9:29 ` Auger Eric
2019-08-13 16:57 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 14/22] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-07-16 9:30 ` Auger Eric
2019-08-05 20:02 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 15/22] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-06-18 15:57 ` Jonathan Cameron
2019-06-24 21:36 ` Jacob Pan
2019-06-27 1:53 ` Lu Baolu
2019-06-27 15:40 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 16/22] iommu/vt-d: Move domain helper to header Jacob Pan
2019-07-16 9:33 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 17/22] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-06-18 16:03 ` Jonathan Cameron
2019-06-24 23:44 ` Jacob Pan
2019-07-16 9:52 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 18/22] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-06-09 13:44 ` [PATCH v4 19/22] iommu/vt-d: Clean up for SVM device list Jacob Pan
2019-06-18 16:42 ` Jonathan Cameron
2019-06-24 23:59 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 20/22] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-06-18 16:44 ` Jonathan Cameron
2019-06-24 22:41 ` Jacob Pan
2019-06-27 2:50 ` Lu Baolu
2019-06-27 20:22 ` Jacob Pan
2019-07-05 2:21 ` Lu Baolu
2019-08-14 17:20 ` Jacob Pan
2019-07-16 16:45 ` Auger Eric
2019-07-16 17:04 ` Raj, Ashok
2019-07-18 7:47 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-07-18 8:35 ` Auger Eric
2019-08-14 20:17 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 22/22] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
-- strict thread matches above, loose matches on Subject: below --
2019-02-18 13:54 [PATCH v4 00/22] SMMUv3 Nested Stage Setup Eric Auger
2019-02-18 13:54 ` [PATCH v4 02/22] iommu: introduce device fault data Eric Auger
2019-03-05 14:56 ` Jean-Philippe Brucker
2019-03-06 9:38 ` Auger Eric
2019-03-06 12:08 ` Jean-Philippe Brucker
2019-03-06 11:03 ` Auger Eric
2019-03-06 14:30 ` Auger Eric
2019-03-06 16:07 ` Jean-Philippe Brucker
2019-03-06 17:32 ` Auger Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1560087862-57608-3-git-send-email-jacob.jun.pan@linux.intel.com \
--to=jacob.jun.pan@linux.intel.com \
--cc=Liu@vger.kernel.org \
--cc=alex.williamson@redhat.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=hch@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe.brucker@arm.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yi.l.liu@intel.com \
--cc=yi.l.liu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).