linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yang Yingliang <yangyingliang@huawei.com>
To: <linux-kernel@vger.kernel.org>, <jeyu@kernel.org>,
	<peterz@infradead.org>
Cc: <yangyingliang@huawei.com>, <namit@vmware.com>,
	<cj.chengjian@huawei.com>
Subject: [PATCH] modules: fix BUG when load module with rodata=n
Date: Mon, 17 Jun 2019 14:59:57 +0800	[thread overview]
Message-ID: <1560754797-40683-1-git-send-email-yangyingliang@huawei.com> (raw)

When loading a module with rodata=n, it causes an executing
NX-protected page BUG.

[   32.379191] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   32.382917] BUG: unable to handle page fault for address: ffffffffc0005000
[   32.385947] #PF: supervisor instruction fetch in kernel mode
[   32.387662] #PF: error_code(0x0011) - permissions violation
[   32.389352] PGD 240c067 P4D 240c067 PUD 240e067 PMD 421a52067 PTE 8000000421a53063
[   32.391396] Oops: 0011 [#1] SMP PTI
[   32.392478] CPU: 7 PID: 2697 Comm: insmod Tainted: G           O      5.2.0-rc5+ #202
[   32.394588] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   32.398157] RIP: 0010:ko_test_init+0x0/0x1000 [ko_test]
[   32.399662] Code: Bad RIP value.
[   32.400621] RSP: 0018:ffffc900029f3ca8 EFLAGS: 00010246
[   32.402171] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   32.404332] RDX: 00000000000004c7 RSI: 0000000000000cc0 RDI: ffffffffc0005000
[   32.406347] RBP: ffffffffc0005000 R08: ffff88842fbebc40 R09: ffffffff810ede4a
[   32.408392] R10: ffffea00108e3480 R11: 0000000000000000 R12: ffff88842bee21a0
[   32.410472] R13: 0000000000000001 R14: 0000000000000001 R15: ffffc900029f3e78
[   32.412609] FS:  00007fb4f0c0a700(0000) GS:ffff88842fbc0000(0000) knlGS:0000000000000000
[   32.414722] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   32.416290] CR2: ffffffffc0004fd6 CR3: 0000000421a90004 CR4: 0000000000020ee0
[   32.418471] Call Trace:
[   32.419136]  do_one_initcall+0x41/0x1df
[   32.420199]  ? _cond_resched+0x10/0x40
[   32.421433]  ? kmem_cache_alloc_trace+0x36/0x160
[   32.422827]  do_init_module+0x56/0x1f7
[   32.423946]  load_module+0x1e67/0x2580
[   32.424947]  ? __alloc_pages_nodemask+0x150/0x2c0
[   32.426413]  ? map_vm_area+0x2d/0x40
[   32.427530]  ? __vmalloc_node_range+0x1ef/0x260
[   32.428850]  ? __do_sys_init_module+0x135/0x170
[   32.430060]  ? _cond_resched+0x10/0x40
[   32.431249]  __do_sys_init_module+0x135/0x170
[   32.432547]  do_syscall_64+0x43/0x120
[   32.433853]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Because if rodata=n, set_memory_x() cann't be called, fix this by
calling set_memory_x in complete_formation();

Fixes: f2c65fb3221a ("x86/modules: Avoid breaking W^X while loading modules")
Suggested-by: Jian Cheng <cj.chengjian@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 kernel/module.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/kernel/module.c b/kernel/module.c
index 80c7c09584cf..1a5d879573c3 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1949,12 +1949,10 @@ void module_enable_ro(const struct module *mod, bool after_init)
 	set_vm_flush_reset_perms(mod->core_layout.base);
 	set_vm_flush_reset_perms(mod->init_layout.base);
 	frob_text(&mod->core_layout, set_memory_ro);
-	frob_text(&mod->core_layout, set_memory_x);
 
 	frob_rodata(&mod->core_layout, set_memory_ro);
 
 	frob_text(&mod->init_layout, set_memory_ro);
-	frob_text(&mod->init_layout, set_memory_x);
 
 	frob_rodata(&mod->init_layout, set_memory_ro);
 
@@ -2018,6 +2016,12 @@ void set_all_modules_text_ro(void)
 static void module_enable_nx(const struct module *mod) { }
 #endif
 
+static void module_enable_x(const struct module *mod)
+{
+	frob_text(&mod->core_layout, set_memory_x);
+	frob_text(&mod->init_layout, set_memory_x);
+}
+
 #ifdef CONFIG_LIVEPATCH
 /*
  * Persist Elf information about a module. Copy the Elf header,
@@ -3616,6 +3620,7 @@ static int complete_formation(struct module *mod, struct load_info *info)
 
 	module_enable_ro(mod, false);
 	module_enable_nx(mod);
+	module_enable_x(mod);
 
 	/* Mark state as coming so strong_try_module_get() ignores us,
 	 * but kallsyms etc. can see us. */
-- 
2.17.1


             reply	other threads:[~2019-06-17  6:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-17  6:59 Yang Yingliang [this message]
2019-06-18  5:59 ` [PATCH] modules: fix BUG when load module with rodata=n Nadav Amit
2019-06-18 14:28   ` Jessica Yu
2019-06-18 13:48 ` Jessica Yu
2019-06-19  2:28   ` Yang Yingliang
2019-06-19 10:03     ` Jessica Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560754797-40683-1-git-send-email-yangyingliang@huawei.com \
    --to=yangyingliang@huawei.com \
    --cc=cj.chengjian@huawei.com \
    --cc=jeyu@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=namit@vmware.com \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).