From: Huazhong Tan <tanhuazhong@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
<linuxarm@huawei.com>, Yonglong Liu <liuyonglong@huawei.com>,
Peng Li <lipeng321@huawei.com>,
Huazhong Tan <tanhuazhong@huawei.com>
Subject: [PATCH net-next 06/12] net: hns3: add Asym Pause support to fix autoneg problem
Date: Fri, 28 Jun 2019 19:50:12 +0800 [thread overview]
Message-ID: <1561722618-12168-7-git-send-email-tanhuazhong@huawei.com> (raw)
In-Reply-To: <1561722618-12168-1-git-send-email-tanhuazhong@huawei.com>
From: Yonglong Liu <liuyonglong@huawei.com>
Local device and link partner config auto-negotiation on both,
local device config pause frame use as: rx on/tx off,
link partner config pause frame use as: rx off/tx on.
We except the result is:
Local device:
Autonegotiate: on
RX: on
TX: off
RX negotiated: on
TX negotiated: off
Link partner:
Autonegotiate: on
RX: off
TX: on
RX negotiated: off
TX negotiated: on
But actually, the result of Local device and link partner is both:
Autonegotiate: on
RX: off
TX: off
RX negotiated: off
TX negotiated: off
The root cause is that the supported flag is has only Pause,
reference to the function genphy_config_advert():
static int genphy_config_advert(struct phy_device *phydev)
{
...
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);
...
}
The pause frame use of link partner is rx off/tx on, so its
advertising only set the bit Asym_Pause, and the supported is
only set the bit Pause, so the result of linkmode_and(), is
rx off/tx off.
This patch adds Asym_Pause to the supported flag to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index b2faebd..896605f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1061,6 +1061,7 @@ static void hclge_parse_copper_link_mode(struct hclge_dev *hdev,
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
}
static void hclge_parse_link_mode(struct hclge_dev *hdev, u8 speed_ability)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index d906d09..abb1b43 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -224,6 +224,13 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle)
linkmode_and(phydev->supported, phydev->supported, mask);
linkmode_copy(phydev->advertising, phydev->supported);
+ /* supported flag is Pause and Asym Pause, but default advertising
+ * should be rx on, tx on, so need clear Asym Pause in advertising
+ * flag
+ */
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydev->advertising);
+
return 0;
}
--
2.7.4
next prev parent reply other threads:[~2019-06-28 11:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-28 11:50 [PATCH net-next 00/12] net: hns3: some code optimizations & cleanups & bugfixes Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 01/12] net: hns3: fix __QUEUE_STATE_STACK_XOFF not cleared issue Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 02/12] net: hns3: enable DCB when TC num is one and pfc_en is non-zero Huazhong Tan
2019-06-28 18:47 ` Willem de Bruijn
2019-06-29 1:15 ` Yunsheng Lin
2019-06-28 11:50 ` [PATCH net-next 03/12] net: hns3: change SSU's buffer allocation according to UM Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 04/12] net: hns3: add some error checking in hclge_tm module Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 05/12] net: hns3: fix a -Wformat-nonliteral compile warning Huazhong Tan
2019-06-28 11:50 ` Huazhong Tan [this message]
2019-06-28 11:50 ` [PATCH net-next 07/12] net: hns3: re-schedule reset task while VF reset fail Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 08/12] net: hns3: handle empty unknown interrupt Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 09/12] net: hns3: fix a statistics issue about l3l4 checksum error Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 10/12] net: hns3: remove unused linkmode definition Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 11/12] net: hns3: remove RXD_VLD check in hns3_handle_bdinfo Huazhong Tan
2019-06-28 11:50 ` [PATCH net-next 12/12] net: hns3: optimize the CSQ cmd error handling Huazhong Tan
2019-06-28 16:40 ` [PATCH net-next 00/12] net: hns3: some code optimizations & cleanups & bugfixes David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1561722618-12168-7-git-send-email-tanhuazhong@huawei.com \
--to=tanhuazhong@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=liuyonglong@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).