linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Robin Murphy <robin.murphy@arm.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Evan Green <evgreen@chromium.org>, Tomasz Figa <tfiga@google.com>,
	Will Deacon <will.deacon@arm.com>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<iommu@lists.linux-foundation.org>, <yingjoe.chen@mediatek.com>,
	<yong.wu@mediatek.com>, <youlin.pei@mediatek.com>,
	Nicolas Boichat <drinkcat@chromium.org>, <anan.sun@mediatek.com>,
	Matthias Kaehlcke <mka@chromium.org>
Subject: [PATCH v8 07/21] iommu/io-pgtable-arm-v7s: Extend MediaTek 4GB Mode
Date: Sat, 29 Jun 2019 10:09:13 +0800	[thread overview]
Message-ID: <1561774167-24141-8-git-send-email-yong.wu@mediatek.com> (raw)
In-Reply-To: <1561774167-24141-1-git-send-email-yong.wu@mediatek.com>

MediaTek extend the arm v7s descriptor to support the dram over 4GB.

In the mt2712 and mt8173, it's called "4GB mode", the physical address
is from 0x4000_0000 to 0x1_3fff_ffff, but from EMI point of view, it
is remapped to high address from 0x1_0000_0000 to 0x1_ffff_ffff, the
bit32 is always enabled. thus, in the M4U, we always enable the bit9
for all PTEs which means to enable bit32 of physical address.

but in mt8183, M4U support the dram from 0x4000_0000 to 0x3_ffff_ffff
which isn't remaped. We extend the PTEs: the bit9 represent bit32 of
PA and the bit4 represent bit33 of PA. Meanwhile the iova still is
32bits.

In order to unify code, in the "4GB mode", we add the bit32 for the
physical address manually in our driver.

Correspondingly, Adding bit32 and bit33 for the PA in the iova_to_phys
has to been moved into v7s.

Regarding whether the pagetable address could be over 4GB, the mt8183
support it while the previous mt8173 don't. thus keep it as is.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
Comparing with the previous one:
1). Add a new patch "iommu/mediatek: Fix iova_to_phys PA start for 4GB
mode" before this one. Thus rebase it.
A little difference: in the 4gb mode, we add bit32 for PA. and the PA got
from iova_to_phys always have bit32 here, thus we should adjust it to locate
the valid pa.
2). Add this code suggested from Evan.
 if (!data->plat_data->has_4gb_mode)
	       data->enable_4GB = false;
---
 drivers/iommu/io-pgtable-arm-v7s.c | 31 ++++++++++++++++++++++++-------
 drivers/iommu/mtk_iommu.c          | 29 ++++++++++++++++++-----------
 drivers/iommu/mtk_iommu.h          |  1 +
 3 files changed, 43 insertions(+), 18 deletions(-)

diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
index 94c38db..4077822 100644
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -123,7 +123,9 @@
 #define ARM_V7S_TEX_MASK		0x7
 #define ARM_V7S_ATTR_TEX(val)		(((val) & ARM_V7S_TEX_MASK) << ARM_V7S_TEX_SHIFT)
 
-#define ARM_V7S_ATTR_MTK_4GB		BIT(9) /* MTK extend it for 4GB mode */
+/* MediaTek extend the two bits below for over 4GB mode */
+#define ARM_V7S_ATTR_MTK_PA_BIT32	BIT(9)
+#define ARM_V7S_ATTR_MTK_PA_BIT33	BIT(4)
 
 /* *well, except for TEX on level 2 large pages, of course :( */
 #define ARM_V7S_CONT_PAGE_TEX_SHIFT	6
@@ -190,13 +192,22 @@ static dma_addr_t __arm_v7s_dma_addr(void *pages)
 static arm_v7s_iopte paddr_to_iopte(phys_addr_t paddr, int lvl,
 				    struct io_pgtable_cfg *cfg)
 {
-	return paddr & ARM_V7S_LVL_MASK(lvl);
+	arm_v7s_iopte pte = paddr & ARM_V7S_LVL_MASK(lvl);
+
+	if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB) {
+		if (paddr & BIT_ULL(32))
+			pte |= ARM_V7S_ATTR_MTK_PA_BIT32;
+		if (paddr & BIT_ULL(33))
+			pte |= ARM_V7S_ATTR_MTK_PA_BIT33;
+	}
+	return pte;
 }
 
 static phys_addr_t iopte_to_paddr(arm_v7s_iopte pte, int lvl,
 				  struct io_pgtable_cfg *cfg)
 {
 	arm_v7s_iopte mask;
+	phys_addr_t paddr;
 
 	if (ARM_V7S_PTE_IS_TABLE(pte, lvl))
 		mask = ARM_V7S_TABLE_MASK;
@@ -205,7 +216,14 @@ static phys_addr_t iopte_to_paddr(arm_v7s_iopte pte, int lvl,
 	else
 		mask = ARM_V7S_LVL_MASK(lvl);
 
-	return pte & mask;
+	paddr = pte & mask;
+	if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB) {
+		if (pte & ARM_V7S_ATTR_MTK_PA_BIT32)
+			paddr |= BIT_ULL(32);
+		if (pte & ARM_V7S_ATTR_MTK_PA_BIT33)
+			paddr |= BIT_ULL(33);
+	}
+	return paddr;
 }
 
 static arm_v7s_iopte *iopte_deref(arm_v7s_iopte pte, int lvl,
@@ -326,9 +344,6 @@ static arm_v7s_iopte arm_v7s_prot_to_pte(int prot, int lvl,
 	if (lvl == 1 && (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS))
 		pte |= ARM_V7S_ATTR_NS_SECTION;
 
-	if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB)
-		pte |= ARM_V7S_ATTR_MTK_4GB;
-
 	return pte;
 }
 
@@ -515,7 +530,9 @@ static int arm_v7s_map(struct io_pgtable_ops *ops, unsigned long iova,
 	if (!(prot & (IOMMU_READ | IOMMU_WRITE)))
 		return 0;
 
-	if (WARN_ON(upper_32_bits(iova) || upper_32_bits(paddr)))
+	if (WARN_ON(upper_32_bits(iova)) ||
+	    WARN_ON(upper_32_bits(paddr) &&
+		    !(iop->cfg.quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB)))
 		return -ERANGE;
 
 	ret = __arm_v7s_map(data, iova, paddr, size, prot, 1, data->pgd);
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index fefc2e0..4bab283 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -123,10 +123,11 @@ struct mtk_iommu_domain {
  *  0xc000_0000         0x1_c000_0000 ...
  *  0x1_0000_0000       0x1_0000_0000 (No change)
  *
- * The PA in the iova_to_phys that is got from v7s always is u32, But from
- * the CPU point of view, PA should add BIT(32) when PA < 0x4000_0000.
+ * Thus, We always add BIT32 in the iommu_map and disable BIT32 if PA is >=
+ * 0x1_4000_0000 in the iova_to_phys(From cpu point of view, the PA range is
+ * 0x4000_0000 - 0x1_3fff_ffff).
  */
-#define MTK_IOMMU_4GB_MODE_REMAP_BASE	 0x40000000
+#define MTK_IOMMU_4GB_MODE_REMAP_BASE	 0x140000000UL
 
 static LIST_HEAD(m4ulist);	/* List all the M4U HWs */
 
@@ -284,7 +285,8 @@ static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom)
 	dom->cfg = (struct io_pgtable_cfg) {
 		.quirks = IO_PGTABLE_QUIRK_ARM_NS |
 			IO_PGTABLE_QUIRK_NO_PERMS |
-			IO_PGTABLE_QUIRK_TLBI_ON_MAP,
+			IO_PGTABLE_QUIRK_TLBI_ON_MAP |
+			IO_PGTABLE_QUIRK_ARM_MTK_4GB,
 		.pgsize_bitmap = mtk_iommu_ops.pgsize_bitmap,
 		.ias = 32,
 		.oas = 32,
@@ -292,9 +294,6 @@ static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom)
 		.iommu_dev = data->dev,
 	};
 
-	if (data->enable_4GB)
-		dom->cfg.quirks |= IO_PGTABLE_QUIRK_ARM_MTK_4GB;
-
 	dom->iop = alloc_io_pgtable_ops(ARM_V7S, &dom->cfg, data);
 	if (!dom->iop) {
 		dev_err(data->dev, "Failed to alloc io pgtable\n");
@@ -380,12 +379,16 @@ static int mtk_iommu_map(struct iommu_domain *domain, unsigned long iova,
 			 phys_addr_t paddr, size_t size, int prot)
 {
 	struct mtk_iommu_domain *dom = to_mtk_domain(domain);
+	struct mtk_iommu_data *data = mtk_iommu_get_m4u_data();
 	unsigned long flags;
 	int ret;
 
+	/* The "4GB mode" M4U physically can not use the lower remap of Dram. */
+	if (data->enable_4GB)
+		paddr |= BIT_ULL(32);
+
 	spin_lock_irqsave(&dom->pgtlock, flags);
-	ret = dom->iop->map(dom->iop, iova, paddr & DMA_BIT_MASK(32),
-			    size, prot);
+	ret = dom->iop->map(dom->iop, iova, paddr, size, prot);
 	spin_unlock_irqrestore(&dom->pgtlock, flags);
 
 	return ret;
@@ -422,8 +425,8 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
 	pa = dom->iop->iova_to_phys(dom->iop, iova);
 	spin_unlock_irqrestore(&dom->pgtlock, flags);
 
-	if (data->enable_4GB && pa < MTK_IOMMU_4GB_MODE_REMAP_BASE)
-		pa |= BIT_ULL(32);
+	if (data->enable_4GB && pa >= MTK_IOMMU_4GB_MODE_REMAP_BASE)
+		pa &= ~BIT_ULL(32);
 
 	return pa;
 }
@@ -615,6 +618,8 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 
 	/* Whether the current dram is over 4GB */
 	data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
+	if (!data->plat_data->has_4gb_mode)
+		data->enable_4GB = false;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->base = devm_ioremap_resource(dev, res);
@@ -755,10 +760,12 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 
 static const struct mtk_iommu_plat_data mt2712_data = {
 	.m4u_plat     = M4U_MT2712,
+	.has_4gb_mode = true,
 };
 
 static const struct mtk_iommu_plat_data mt8173_data = {
 	.m4u_plat     = M4U_MT8173,
+	.has_4gb_mode = true,
 };
 
 static const struct of_device_id mtk_iommu_of_ids[] = {
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 483d210..d7a001a 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -42,6 +42,7 @@ enum mtk_iommu_plat {
 
 struct mtk_iommu_plat_data {
 	enum mtk_iommu_plat m4u_plat;
+	bool                has_4gb_mode;
 };
 
 struct mtk_iommu_domain;
-- 
1.9.1


  parent reply	other threads:[~2019-06-29  2:11 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-29  2:09 [PATCH v8 00/21] MT8183 IOMMU SUPPORT Yong Wu
2019-06-29  2:09 ` [PATCH v8 01/21] dt-bindings: mediatek: Add binding for mt8183 IOMMU and SMI Yong Wu
2019-06-29  2:09 ` [PATCH v8 02/21] iommu/mediatek: Use a struct as the platform data Yong Wu
2019-06-29  2:09 ` [PATCH v8 03/21] memory: mtk-smi: Use a general config_port interface Yong Wu
2019-06-29  2:09 ` [PATCH v8 04/21] memory: mtk-smi: Use a struct for the platform data for smi-common Yong Wu
2019-06-29  2:09 ` [PATCH v8 05/21] iommu/mediatek: Fix iova_to_phys PA start for 4GB mode Yong Wu
2019-06-29  2:09 ` [PATCH v8 06/21] iommu/io-pgtable-arm-v7s: Add paddr_to_iopte and iopte_to_paddr helpers Yong Wu
2019-06-29  2:09 ` Yong Wu [this message]
2019-07-10 14:36   ` [PATCH v8 07/21] iommu/io-pgtable-arm-v7s: Extend MediaTek 4GB Mode Will Deacon
2019-07-11 11:53     ` Yong Wu
2019-07-11 12:31       ` Will Deacon
2019-07-14  4:41         ` Yong Wu
2019-07-15  9:51           ` Will Deacon
2019-07-17 12:44             ` Yong Wu
2019-07-17 14:23               ` Will Deacon
2019-07-18  5:37                 ` Yong Wu
2019-06-29  2:09 ` [PATCH v8 08/21] iommu/mediatek: Add bclk can be supported optionally Yong Wu
2019-06-29  2:09 ` [PATCH v8 09/21] iommu/mediatek: Add larb-id remapped support Yong Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1561774167-24141-8-git-send-email-yong.wu@mediatek.com \
    --to=yong.wu@mediatek.com \
    --cc=anan.sun@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@google.com \
    --cc=will.deacon@arm.com \
    --cc=yingjoe.chen@mediatek.com \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).