LKML Archive on
 help / color / Atom feed
From: Mukesh Ojha <>
Cc: Mukesh Ojha <>
Subject: [PATCH] rcu: Fix spelling mistake "greate"->"great"
Date: Mon, 29 Jul 2019 13:25:57 +0530
Message-ID: <> (raw)

There is a spelling mistake in file tree_exp.h,
fix this.

Signed-off-by: Mukesh Ojha <>
 kernel/rcu/tree_exp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
index af7e7b9..609fc87 100644
--- a/kernel/rcu/tree_exp.h
+++ b/kernel/rcu/tree_exp.h
@@ -781,7 +781,7 @@ static int rcu_print_task_exp_stall(struct rcu_node *rnp)
  * other hand, if the CPU is not in an RCU read-side critical section,
  * the IPI handler reports the quiescent state immediately.
- * Although this is a greate improvement over previous expedited
+ * Although this is a great improvement over previous expedited
  * implementations, it is still unfriendly to real-time workloads, so is
  * thus not recommended for any sort of common-case code.  In fact, if
  * you are using synchronize_rcu_expedited() in a loop, please restructure
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center,
Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-29  7:55 Mukesh Ojha [this message]
2019-07-30 16:02 ` Paul E. McKenney

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone