LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
To: Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>,
	syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com>
Subject: [PATCH v3] /dev/mem: Bail out upon SIGKILL.
Date: Mon, 26 Aug 2019 22:13:25 +0900
Message-ID: <1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp> (raw)

syzbot found that a thread can stall for minutes inside read_mem() or
write_mem() after that thread was killed by SIGKILL [1]. Reading from
iomem areas of /dev/mem can be slow, depending on the hardware.
While reading 2GB at one read() is legal, delaying termination of killed
thread for minutes is bad. Thus, allow reading/writing /dev/mem and
/dev/kmem to be preemptible and killable.

  [ 1335.912419][T20577] read_mem: sz=4096 count=2134565632
  [ 1335.943194][T20577] read_mem: sz=4096 count=2134561536
  [ 1335.978280][T20577] read_mem: sz=4096 count=2134557440
  [ 1336.011147][T20577] read_mem: sz=4096 count=2134553344
  [ 1336.041897][T20577] read_mem: sz=4096 count=2134549248

Theoretically, reading/writing /dev/mem and /dev/kmem can become
"interruptible". But this patch chose "killable". Future patch will make
them "interruptible" so that we can revert to "killable" if some program
regressed.

[1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com>
---
 drivers/char/mem.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index b08dc50..9eb564c 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -97,6 +97,13 @@ void __weak unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
 }
 #endif
 
+static inline bool should_stop_iteration(void)
+{
+	if (need_resched())
+		cond_resched();
+	return fatal_signal_pending(current);
+}
+
 /*
  * This funcion reads the *physical* memory. The f_pos points directly to the
  * memory location.
@@ -175,6 +182,8 @@ static ssize_t read_mem(struct file *file, char __user *buf,
 		p += sz;
 		count -= sz;
 		read += sz;
+		if (should_stop_iteration())
+			break;
 	}
 	kfree(bounce);
 
@@ -251,6 +260,8 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
 		p += sz;
 		count -= sz;
 		written += sz;
+		if (should_stop_iteration())
+			break;
 	}
 
 	*ppos += written;
@@ -468,6 +479,10 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 			read += sz;
 			low_count -= sz;
 			count -= sz;
+			if (should_stop_iteration()) {
+				count = 0;
+				break;
+			}
 		}
 	}
 
@@ -492,6 +507,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 			buf += sz;
 			read += sz;
 			p += sz;
+			if (should_stop_iteration())
+				break;
 		}
 		free_page((unsigned long)kbuf);
 	}
@@ -544,6 +561,8 @@ static ssize_t do_write_kmem(unsigned long p, const char __user *buf,
 		p += sz;
 		count -= sz;
 		written += sz;
+		if (should_stop_iteration())
+			break;
 	}
 
 	*ppos += written;
@@ -595,6 +614,8 @@ static ssize_t write_kmem(struct file *file, const char __user *buf,
 			buf += sz;
 			virtr += sz;
 			p += sz;
+			if (should_stop_iteration())
+				break;
 		}
 		free_page((unsigned long)kbuf);
 	}
-- 
1.8.3.1


             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-26 13:13 Tetsuo Handa [this message]
2019-08-26 13:29 ` Greg Kroah-Hartman
2019-08-26 13:44   ` Tetsuo Handa
2019-09-04 10:19     ` Tetsuo Handa
2019-09-04 10:50       ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp \
    --to=penguin-kernel@i-love.sakura.ne.jp \
    --cc=arnd@arndb.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git