From: Anson Huang <Anson.Huang@nxp.com>
To: mturquette@baylibre.com, sboyd@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, leonard.crestez@nxp.com, abel.vesa@nxp.com,
peng.fan@nxp.com, ping.bai@nxp.com, chen.fang@nxp.com,
shengjiu.wang@nxp.com, aisheng.dong@nxp.com,
sfr@canb.auug.org.au, l.stach@pengutronix.de,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH 1/2] clk: imx8mm: Move 1443X/1416X PLL clock structure to common place
Date: Thu, 5 Sep 2019 17:58:18 -0400 [thread overview]
Message-ID: <1567720699-23514-1-git-send-email-Anson.Huang@nxp.com> (raw)
Many i.MX8M SoCs use same 1443X/1416X PLL, such as i.MX8MM,
i.MX8MN and later i.MX8M SoCs, moving these PLL definitions
to common place can save a lot of duplicated code on each
platform.
Meanwhile, no need to define PLL clock structure for every
module which uses same type of PLL, e.g., audio/video/dram use
1443X PLL, arm/gpu/vpu/sys use 1416X PLL, define 2 PLL clock
structure for each group is enough.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/clk/imx/clk-imx8mm.c | 87 +++++---------------------------------------
drivers/clk/imx/clk.c | 30 +++++++++++++++
drivers/clk/imx/clk.h | 3 ++
3 files changed, 43 insertions(+), 77 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 2758e3f..9649250 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -26,73 +26,6 @@ static u32 share_count_disp;
static u32 share_count_pdm;
static u32 share_count_nand;
-static const struct imx_pll14xx_rate_table imx8mm_pll1416x_tbl[] = {
- PLL_1416X_RATE(1800000000U, 225, 3, 0),
- PLL_1416X_RATE(1600000000U, 200, 3, 0),
- PLL_1416X_RATE(1200000000U, 300, 3, 1),
- PLL_1416X_RATE(1000000000U, 250, 3, 1),
- PLL_1416X_RATE(800000000U, 200, 3, 1),
- PLL_1416X_RATE(750000000U, 250, 2, 2),
- PLL_1416X_RATE(700000000U, 350, 3, 2),
- PLL_1416X_RATE(600000000U, 300, 3, 2),
-};
-
-static const struct imx_pll14xx_rate_table imx8mm_audiopll_tbl[] = {
- PLL_1443X_RATE(393216000U, 262, 2, 3, 9437),
- PLL_1443X_RATE(361267200U, 361, 3, 3, 17511),
-};
-
-static const struct imx_pll14xx_rate_table imx8mm_videopll_tbl[] = {
- PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
- PLL_1443X_RATE(594000000U, 198, 2, 2, 0),
-};
-
-static const struct imx_pll14xx_rate_table imx8mm_drampll_tbl[] = {
- PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
-};
-
-static struct imx_pll14xx_clk imx8mm_audio_pll = {
- .type = PLL_1443X,
- .rate_table = imx8mm_audiopll_tbl,
- .rate_count = ARRAY_SIZE(imx8mm_audiopll_tbl),
-};
-
-static struct imx_pll14xx_clk imx8mm_video_pll = {
- .type = PLL_1443X,
- .rate_table = imx8mm_videopll_tbl,
- .rate_count = ARRAY_SIZE(imx8mm_videopll_tbl),
-};
-
-static struct imx_pll14xx_clk imx8mm_dram_pll = {
- .type = PLL_1443X,
- .rate_table = imx8mm_drampll_tbl,
- .rate_count = ARRAY_SIZE(imx8mm_drampll_tbl),
-};
-
-static struct imx_pll14xx_clk imx8mm_arm_pll = {
- .type = PLL_1416X,
- .rate_table = imx8mm_pll1416x_tbl,
- .rate_count = ARRAY_SIZE(imx8mm_pll1416x_tbl),
-};
-
-static struct imx_pll14xx_clk imx8mm_gpu_pll = {
- .type = PLL_1416X,
- .rate_table = imx8mm_pll1416x_tbl,
- .rate_count = ARRAY_SIZE(imx8mm_pll1416x_tbl),
-};
-
-static struct imx_pll14xx_clk imx8mm_vpu_pll = {
- .type = PLL_1416X,
- .rate_table = imx8mm_pll1416x_tbl,
- .rate_count = ARRAY_SIZE(imx8mm_pll1416x_tbl),
-};
-
-static struct imx_pll14xx_clk imx8mm_sys_pll = {
- .type = PLL_1416X,
- .rate_table = imx8mm_pll1416x_tbl,
- .rate_count = ARRAY_SIZE(imx8mm_pll1416x_tbl),
-};
-
static const char *pll_ref_sels[] = { "osc_24m", "dummy", "dummy", "dummy", };
static const char *audio_pll1_bypass_sels[] = {"audio_pll1", "audio_pll1_ref_sel", };
static const char *audio_pll2_bypass_sels[] = {"audio_pll2", "audio_pll2_ref_sel", };
@@ -396,16 +329,16 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
clks[IMX8MM_SYS_PLL2_REF_SEL] = imx_clk_mux("sys_pll2_ref_sel", base + 0x104, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
clks[IMX8MM_SYS_PLL3_REF_SEL] = imx_clk_mux("sys_pll3_ref_sel", base + 0x114, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
- clks[IMX8MM_AUDIO_PLL1] = imx_clk_pll14xx("audio_pll1", "audio_pll1_ref_sel", base, &imx8mm_audio_pll);
- clks[IMX8MM_AUDIO_PLL2] = imx_clk_pll14xx("audio_pll2", "audio_pll2_ref_sel", base + 0x14, &imx8mm_audio_pll);
- clks[IMX8MM_VIDEO_PLL1] = imx_clk_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx8mm_video_pll);
- clks[IMX8MM_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx8mm_dram_pll);
- clks[IMX8MM_GPU_PLL] = imx_clk_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx8mm_gpu_pll);
- clks[IMX8MM_VPU_PLL] = imx_clk_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx8mm_vpu_pll);
- clks[IMX8MM_ARM_PLL] = imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx8mm_arm_pll);
- clks[IMX8MM_SYS_PLL1] = imx_clk_pll14xx("sys_pll1", "sys_pll1_ref_sel", base + 0x94, &imx8mm_sys_pll);
- clks[IMX8MM_SYS_PLL2] = imx_clk_pll14xx("sys_pll2", "sys_pll2_ref_sel", base + 0x104, &imx8mm_sys_pll);
- clks[IMX8MM_SYS_PLL3] = imx_clk_pll14xx("sys_pll3", "sys_pll3_ref_sel", base + 0x114, &imx8mm_sys_pll);
+ clks[IMX8MM_AUDIO_PLL1] = imx_clk_pll14xx("audio_pll1", "audio_pll1_ref_sel", base, &imx_1443x_pll);
+ clks[IMX8MM_AUDIO_PLL2] = imx_clk_pll14xx("audio_pll2", "audio_pll2_ref_sel", base + 0x14, &imx_1443x_pll);
+ clks[IMX8MM_VIDEO_PLL1] = imx_clk_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx_1443x_pll);
+ clks[IMX8MM_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_pll);
+ clks[IMX8MM_GPU_PLL] = imx_clk_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx_1416x_pll);
+ clks[IMX8MM_VPU_PLL] = imx_clk_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx_1416x_pll);
+ clks[IMX8MM_ARM_PLL] = imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx_1416x_pll);
+ clks[IMX8MM_SYS_PLL1] = imx_clk_pll14xx("sys_pll1", "sys_pll1_ref_sel", base + 0x94, &imx_1416x_pll);
+ clks[IMX8MM_SYS_PLL2] = imx_clk_pll14xx("sys_pll2", "sys_pll2_ref_sel", base + 0x104, &imx_1416x_pll);
+ clks[IMX8MM_SYS_PLL3] = imx_clk_pll14xx("sys_pll3", "sys_pll3_ref_sel", base + 0x114, &imx_1416x_pll);
/* PLL bypass out */
clks[IMX8MM_AUDIO_PLL1_BYPASS] = imx_clk_mux_flags("audio_pll1_bypass", base, 4, 1, audio_pll1_bypass_sels, ARRAY_SIZE(audio_pll1_bypass_sels), CLK_SET_RATE_PARENT);
diff --git a/drivers/clk/imx/clk.c b/drivers/clk/imx/clk.c
index cfc05e4..788e4eb 100644
--- a/drivers/clk/imx/clk.c
+++ b/drivers/clk/imx/clk.c
@@ -14,6 +14,36 @@
DEFINE_SPINLOCK(imx_ccm_lock);
+const struct imx_pll14xx_rate_table imx_pll1416x_tbl[] = {
+ PLL_1416X_RATE(1800000000U, 225, 3, 0),
+ PLL_1416X_RATE(1600000000U, 200, 3, 0),
+ PLL_1416X_RATE(1200000000U, 300, 3, 1),
+ PLL_1416X_RATE(1000000000U, 250, 3, 1),
+ PLL_1416X_RATE(800000000U, 200, 3, 1),
+ PLL_1416X_RATE(750000000U, 250, 2, 2),
+ PLL_1416X_RATE(700000000U, 350, 3, 2),
+ PLL_1416X_RATE(600000000U, 300, 3, 2),
+};
+
+const struct imx_pll14xx_rate_table imx_pll1443x_tbl[] = {
+ PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
+ PLL_1443X_RATE(594000000U, 198, 2, 2, 0),
+ PLL_1443X_RATE(393216000U, 262, 2, 3, 9437),
+ PLL_1443X_RATE(361267200U, 361, 3, 3, 17511),
+};
+
+struct imx_pll14xx_clk imx_1443x_pll = {
+ .type = PLL_1443X,
+ .rate_table = imx_pll1443x_tbl,
+ .rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
+};
+
+struct imx_pll14xx_clk imx_1416x_pll = {
+ .type = PLL_1416X,
+ .rate_table = imx_pll1416x_tbl,
+ .rate_count = ARRAY_SIZE(imx_pll1416x_tbl),
+};
+
void imx_unregister_clocks(struct clk *clks[], unsigned int count)
{
unsigned int i;
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index f7a389a..bc5bb6a 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -50,6 +50,9 @@ struct imx_pll14xx_clk {
int flags;
};
+extern struct imx_pll14xx_clk imx_1416x_pll;
+extern struct imx_pll14xx_clk imx_1443x_pll;
+
#define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
imx_clk_hw_cpu(name, parent_name, div, mux, pll, step)->clk
--
2.7.4
next reply other threads:[~2019-09-05 9:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-05 21:58 Anson Huang [this message]
2019-09-05 13:05 ` [PATCH 1/2] clk: imx8mm: Move 1443X/1416X PLL clock structure to common place Leonard Crestez
2019-09-06 1:03 ` Anson Huang
2019-09-05 21:58 ` [PATCH 2/2] clk: imx8mn: Use common 1443X/1416X PLL clock structure Anson Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567720699-23514-1-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=chen.fang@nxp.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=peng.fan@nxp.com \
--cc=ping.bai@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=sfr@canb.auug.org.au \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).