linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 00/16] kvm: x86: Support AMD SVM AVIC w/ in-kernel irqchip mode
@ 2019-09-13 19:00 Suthikulpanit, Suravee
  2019-09-13 19:00 ` [PATCH v3 01/16] kvm: x86: Modify kvm_x86_ops.get_enable_apicv() to use struct kvm parameter Suthikulpanit, Suravee
                   ` (16 more replies)
  0 siblings, 17 replies; 26+ messages in thread
From: Suthikulpanit, Suravee @ 2019-09-13 19:00 UTC (permalink / raw)
  To: linux-kernel, kvm
  Cc: pbonzini, rkrcmar, joro, vkuznets, graf, jschoenh, karahmed,
	rimasluk, Grimm, Jon, Suthikulpanit, Suravee

The 'commit 67034bb9dd5e ("KVM: SVM: Add irqchip_split() checks before
enabling AVIC")' was introduced to fix miscellaneous boot-hang issues
when enable AVIC. This is mainly due to AVIC hardware doest not #vmexit
on write to LAPIC EOI register resulting in-kernel PIC and IOAPIC to
wait and do not inject new interrupts (e.g. PIT, RTC).

This limits AVIC to only work with kernel_irqchip=split mode, which is
not currently enabled by default, and also required user-space to
support split irqchip model, which might not be the case.

The goal of this series is to enable AVIC to work in both irqchip modes,
by allowing AVIC to be deactivated temporarily during runtime, and fallback
to legacy interrupt injection mode (w/ vINTR and interrupt windows)
when needed, and then re-enabled subsequently.

Similar approach is also used to handle Hyper-V SynIC in the
'commit 5c919412fe61 ("kvm/x86: Hyper-V synthetic interrupt controller")',
where APICv is permanently disabled at runtime (currently broken for
AVIC, and fixed by this series). 

This series contains three parts:
  * Part 1: patch 1-2
    Introduce APICv state enum and logic for keeping track of the state
    for each vm.
 
  * Part 2: patch 3-11
    Add support for activate/deactivate APICv at runtime

  * Part 3: patch 12-16:
    Provide workaround for AVIC EOI and allow enable AVIC w/
    kernel_irqchip=on

Pre-requisite Patch:
  * commit b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC
    (de-)activation code")
    (https://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git/commit/
     ?h=next&id=b9c6ff94e43a0ee053e0c1d983fba1ac4953b762)

This series has been tested against v5.3-rc5 as following:
  * Booting Linux and Windows Server 2019 VMs upto 240 vcpus
    and FreeBSD upto 128 vcpus w/ qemu option "kernel-irqchip=on"
    and "-no-hpet".
  * Pass-through Intel 10GbE NIC and run netperf in the VM.

Changes from V2: (https://lkml.org/lkml/2019/8/15/672)
  * Rebase to v5.3-rc5
  * Misc changes recommended by Alex and Vitaly.
  * Rename APICV_DEACTIVATED to APICV_SUSPENDED
  * Disable AVIC when guest booting w/ SVM support since AVIC
    does not currently support guest w/ nested virt.
  * Add tracepoint for APICV activate/deactivate request. (per Alex)
  * Consolidate changes for handling EOI for kvm PIT emulation and
    IOAPIC RTC handling in V2 into ioapic_lazy_update_eoi() in
    patch 17/18 of v3 serie.
  * Remove patches for providing per-vm apicv_state debug information.

Changes from V1: (https://lkml.org/lkml/2019/3/22/1042)
  * Introduce APICv state enumeration
  * Introduce KVM debugfs for APICv state
  * Add synchronization logic for APICv state to prevent potential
    race condition (per Jan's suggestion)
  * Add support for activate/deactivate posted interrupt
    (per Jan's suggestion)
  * Remove callback functions for handling APIC ID, DFR and LDR update
    (per Paolo's suggestion)
  * Add workaround for handling EOI for in-kernel PIT and IOAPIC.

Suravee Suthikulpanit (16):
  kvm: x86: Modify kvm_x86_ops.get_enable_apicv() to use struct kvm
    parameter
  kvm: x86: Introduce KVM APICv state
  kvm: lapic: Introduce APICv update helper function
  kvm: x86: Add support for activate/de-activate APICv at runtime
  kvm: x86: Add APICv activate/deactivate request trace points
  kvm: x86: svm: Add support to activate/deactivate posted interrupts
  svm: Add support for setup/destroy virutal APIC backing page for AVIC
  svm: Add support for activate/deactivate AVIC at runtime
  kvm: x86: hyperv: Use APICv deactivate request interface
  svm: Disable AVIC when launching guest with SVM support
  svm: Temporary deactivate AVIC during ExtINT handling
  kvm: x86: Introduce struct kvm_x86_ops.apicv_eoi_accelerate
  kvm: lapic: Clean up APIC predefined macros
  kvm: ioapic: Refactor kvm_ioapic_update_eoi()
  kvm: x86: ioapic: Lazy update IOAPIC EOI
  svm: Allow AVIC with in-kernel irqchip mode

 arch/x86/include/asm/kvm_host.h |  28 +++++-
 arch/x86/kvm/hyperv.c           |  12 ++-
 arch/x86/kvm/ioapic.c           | 149 +++++++++++++++++++-----------
 arch/x86/kvm/lapic.c            |  35 ++++---
 arch/x86/kvm/lapic.h            |   2 +
 arch/x86/kvm/svm.c              | 198 +++++++++++++++++++++++++++++++++++++---
 arch/x86/kvm/trace.h            |  30 ++++++
 arch/x86/kvm/vmx/vmx.c          |   2 +-
 arch/x86/kvm/x86.c              | 136 ++++++++++++++++++++++++++-
 9 files changed, 506 insertions(+), 86 deletions(-)

-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2019-10-31 23:09 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-13 19:00 [PATCH v3 00/16] kvm: x86: Support AMD SVM AVIC w/ in-kernel irqchip mode Suthikulpanit, Suravee
2019-09-13 19:00 ` [PATCH v3 01/16] kvm: x86: Modify kvm_x86_ops.get_enable_apicv() to use struct kvm parameter Suthikulpanit, Suravee
2019-09-13 19:00 ` [PATCH v3 02/16] kvm: x86: Introduce KVM APICv state Suthikulpanit, Suravee
2019-09-13 19:00 ` [PATCH v3 03/16] kvm: lapic: Introduce APICv update helper function Suthikulpanit, Suravee
2019-09-13 19:00 ` [PATCH v3 04/16] kvm: x86: Add support for activate/de-activate APICv at runtime Suthikulpanit, Suravee
2019-10-09  8:38   ` Paolo Bonzini
2019-09-13 19:00 ` [PATCH v3 05/16] kvm: x86: Add APICv activate/deactivate request trace points Suthikulpanit, Suravee
2019-09-13 19:00 ` [PATCH v3 06/16] kvm: x86: svm: Add support to activate/deactivate posted interrupts Suthikulpanit, Suravee
2019-10-09  8:25   ` Paolo Bonzini
2019-09-13 19:00 ` [PATCH v3 07/16] svm: Add support for setup/destroy virutal APIC backing page for AVIC Suthikulpanit, Suravee
2019-09-13 19:00 ` [PATCH v3 08/16] svm: Add support for activate/deactivate AVIC at runtime Suthikulpanit, Suravee
2019-09-13 19:01 ` [PATCH v3 09/16] kvm: x86: hyperv: Use APICv deactivate request interface Suthikulpanit, Suravee
2019-10-09  9:21   ` Paolo Bonzini
2019-09-13 19:01 ` [PATCH v3 10/16] svm: Disable AVIC when launching guest with SVM support Suthikulpanit, Suravee
2019-09-13 19:01 ` [PATCH v3 11/16] svm: Temporary deactivate AVIC during ExtINT handling Suthikulpanit, Suravee
2019-09-13 19:01 ` [PATCH v3 12/16] kvm: x86: Introduce struct kvm_x86_ops.apicv_eoi_accelerate Suthikulpanit, Suravee
2019-09-13 19:01 ` [PATCH v3 13/16] kvm: lapic: Clean up APIC predefined macros Suthikulpanit, Suravee
2019-09-13 19:01 ` [PATCH v3 14/16] kvm: ioapic: Refactor kvm_ioapic_update_eoi() Suthikulpanit, Suravee
2019-09-13 19:01 ` [PATCH v3 15/16] kvm: x86: ioapic: Lazy update IOAPIC EOI Suthikulpanit, Suravee
2019-10-09  9:21   ` Paolo Bonzini
2019-10-09  9:55     ` Roman Kagan
2019-10-31 15:17     ` Suthikulpanit, Suravee
2019-10-31 23:09       ` Paolo Bonzini
2019-09-13 19:01 ` [PATCH v3 16/16] svm: Allow AVIC with in-kernel irqchip mode Suthikulpanit, Suravee
2019-10-08 18:44 ` [PATCH v3 00/16] kvm: x86: Support AMD SVM AVIC w/ " Suthikulpanit, Suravee
2019-10-09  9:01   ` Paolo Bonzini

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).