* [PATCH V1 1/2] regulator: dt-bindings: Add PM6150x compatibles
[not found] <1570183734-30706-1-git-send-email-kgunda@codeaurora.org>
@ 2019-10-04 10:08 ` Kiran Gunda
2019-10-04 17:52 ` Applied "regulator: dt-bindings: Add PM6150x compatibles" to the regulator tree Mark Brown
2019-10-04 10:08 ` [PATCH V1 2/2] regulator: qcom-rpmh: add PM6150/PM6150L regulator support Kiran Gunda
1 sibling, 1 reply; 4+ messages in thread
From: Kiran Gunda @ 2019-10-04 10:08 UTC (permalink / raw)
To: bjorn.andersson, Andy Gross, Liam Girdwood, Mark Brown,
Rob Herring, Mark Rutland, linux-arm-msm, linux-kernel,
devicetree
Cc: Kiran Gunda
Add PM6150 and PM6150L compatibles for Qualcomm SC7180 platfrom.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
index bab9f71..97c3e0b 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -28,6 +28,8 @@ Supported regulator node names:
PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
PMI8998: bob
+ PM6150: smps1 - smps5, ldo1 - ldo19
+ PM6150L: smps1 - smps8, ldo1 - ldo11, bob
========================
First Level Nodes - PMIC
@@ -43,6 +45,8 @@ First Level Nodes - PMIC
"qcom,pm8150l-rpmh-regulators"
"qcom,pm8998-rpmh-regulators"
"qcom,pmi8998-rpmh-regulators"
+ "qcom,pm6150-rpmh-regulators"
+ "qcom,pm6150l-rpmh-regulators"
- qcom,pmic-id
Usage: required
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH V1 2/2] regulator: qcom-rpmh: add PM6150/PM6150L regulator support
[not found] <1570183734-30706-1-git-send-email-kgunda@codeaurora.org>
2019-10-04 10:08 ` [PATCH V1 1/2] regulator: dt-bindings: Add PM6150x compatibles Kiran Gunda
@ 2019-10-04 10:08 ` Kiran Gunda
2019-10-04 17:52 ` Applied "regulator: qcom-rpmh: add PM6150/PM6150L regulator support" to the regulator tree Mark Brown
1 sibling, 1 reply; 4+ messages in thread
From: Kiran Gunda @ 2019-10-04 10:08 UTC (permalink / raw)
To: bjorn.andersson, Andy Gross, Liam Girdwood, Mark Brown,
linux-arm-msm, linux-kernel
Cc: Kiran Gunda
Add support for PM6150/PM6150L regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
drivers/regulator/qcom-rpmh-regulator.c | 62 ++++++++++++++++++++++++++++++++-
1 file changed, 61 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index db6c085..8ae7ddf 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+// Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
#define pr_fmt(fmt) "%s: " fmt, __func__
@@ -878,6 +878,58 @@ static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
{},
};
+static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4-l7-l8"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo, "vdd-l4-l7-l8"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l4-l7-l8"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l9"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo_lv, "vdd-l10-l14-l15"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo_lv, "vdd-l11-l12-l13"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l11-l12-l13"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo_lv, "vdd-l11-l12-l13"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo_lv, "vdd-l10-l14-l15"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo_lv, "vdd-l10-l14-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_hfsmps510, "vdd-s8"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l8"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-l11"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l1-l8"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l9-l10"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
+ RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
+ {},
+};
+
static int rpmh_regulator_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -940,6 +992,14 @@ static int rpmh_regulator_probe(struct platform_device *pdev)
.compatible = "qcom,pmi8998-rpmh-regulators",
.data = pmi8998_vreg_data,
},
+ {
+ .compatible = "qcom,pm6150-rpmh-regulators",
+ .data = pm6150_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm6150l-rpmh-regulators",
+ .data = pm6150l_vreg_data,
+ },
{}
};
MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Applied "regulator: dt-bindings: Add PM6150x compatibles" to the regulator tree
2019-10-04 10:08 ` [PATCH V1 1/2] regulator: dt-bindings: Add PM6150x compatibles Kiran Gunda
@ 2019-10-04 17:52 ` Mark Brown
0 siblings, 0 replies; 4+ messages in thread
From: Mark Brown @ 2019-10-04 17:52 UTC (permalink / raw)
To: Kiran Gunda
Cc: Andy Gross, bjorn.andersson, devicetree, Liam Girdwood,
linux-arm-msm, linux-kernel, Mark Brown, Mark Rutland,
Rob Herring
The patch
regulator: dt-bindings: Add PM6150x compatibles
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 0c06b311c053ab12a9690e17a98ff4e4a90ab3e5 Mon Sep 17 00:00:00 2001
From: Kiran Gunda <kgunda@codeaurora.org>
Date: Fri, 4 Oct 2019 15:38:53 +0530
Subject: [PATCH] regulator: dt-bindings: Add PM6150x compatibles
Add PM6150 and PM6150L compatibles for Qualcomm SC7180 platfrom.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Link: https://lore.kernel.org/r/1570183734-30706-2-git-send-email-kgunda@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/regulator/qcom,rpmh-regulator.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
index bab9f71140b8..97c3e0b7611c 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -28,6 +28,8 @@ Supported regulator node names:
PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
PMI8998: bob
+ PM6150: smps1 - smps5, ldo1 - ldo19
+ PM6150L: smps1 - smps8, ldo1 - ldo11, bob
========================
First Level Nodes - PMIC
@@ -43,6 +45,8 @@ First Level Nodes - PMIC
"qcom,pm8150l-rpmh-regulators"
"qcom,pm8998-rpmh-regulators"
"qcom,pmi8998-rpmh-regulators"
+ "qcom,pm6150-rpmh-regulators"
+ "qcom,pm6150l-rpmh-regulators"
- qcom,pmic-id
Usage: required
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Applied "regulator: qcom-rpmh: add PM6150/PM6150L regulator support" to the regulator tree
2019-10-04 10:08 ` [PATCH V1 2/2] regulator: qcom-rpmh: add PM6150/PM6150L regulator support Kiran Gunda
@ 2019-10-04 17:52 ` Mark Brown
0 siblings, 0 replies; 4+ messages in thread
From: Mark Brown @ 2019-10-04 17:52 UTC (permalink / raw)
To: Kiran Gunda
Cc: Andy Gross, bjorn.andersson, Liam Girdwood, linux-arm-msm,
linux-kernel, Mark Brown
The patch
regulator: qcom-rpmh: add PM6150/PM6150L regulator support
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 75bb518e9bbf666a851cd43a9aba8e085b5008d8 Mon Sep 17 00:00:00 2001
From: Kiran Gunda <kgunda@codeaurora.org>
Date: Fri, 4 Oct 2019 15:38:54 +0530
Subject: [PATCH] regulator: qcom-rpmh: add PM6150/PM6150L regulator support
Add support for PM6150/PM6150L regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Link: https://lore.kernel.org/r/1570183734-30706-3-git-send-email-kgunda@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/qcom-rpmh-regulator.c | 62 ++++++++++++++++++++++++-
1 file changed, 61 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index db6c085da65e..8ae7ddf93b52 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+// Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
#define pr_fmt(fmt) "%s: " fmt, __func__
@@ -878,6 +878,58 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
{},
};
+static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4-l7-l8"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo, "vdd-l4-l7-l8"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l4-l7-l8"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l9"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo_lv, "vdd-l10-l14-l15"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo_lv, "vdd-l11-l12-l13"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l11-l12-l13"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo_lv, "vdd-l11-l12-l13"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo_lv, "vdd-l10-l14-l15"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo_lv, "vdd-l10-l14-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo, "vdd-l5-l16-l17-l18-l19"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_hfsmps510, "vdd-s8"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l8"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-l11"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l1-l8"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l9-l10"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
+ RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
+ {},
+};
+
static int rpmh_regulator_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -940,6 +992,14 @@ static const struct of_device_id rpmh_regulator_match_table[] = {
.compatible = "qcom,pmi8998-rpmh-regulators",
.data = pmi8998_vreg_data,
},
+ {
+ .compatible = "qcom,pm6150-rpmh-regulators",
+ .data = pm6150_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm6150l-rpmh-regulators",
+ .data = pm6150l_vreg_data,
+ },
{}
};
MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-04 17:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1570183734-30706-1-git-send-email-kgunda@codeaurora.org>
2019-10-04 10:08 ` [PATCH V1 1/2] regulator: dt-bindings: Add PM6150x compatibles Kiran Gunda
2019-10-04 17:52 ` Applied "regulator: dt-bindings: Add PM6150x compatibles" to the regulator tree Mark Brown
2019-10-04 10:08 ` [PATCH V1 2/2] regulator: qcom-rpmh: add PM6150/PM6150L regulator support Kiran Gunda
2019-10-04 17:52 ` Applied "regulator: qcom-rpmh: add PM6150/PM6150L regulator support" to the regulator tree Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).