From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Alex Williamson <alex.williamson@redhat.com>,
Jean-Philippe Brucker <jean-philippe@linaro.com>
Cc: "Yi Liu" <yi.l.liu@intel.com>,
"Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
"Christoph Hellwig" <hch@infradead.org>,
"Lu Baolu" <baolu.lu@linux.intel.com>,
Jonathan Cameron <jic23@kernel.org>,
Eric Auger <eric.auger@redhat.com>,
Jacob Pan <jacob.jun.pan@linux.intel.com>
Subject: [PATCH v7 04/11] iommu/vt-d: Replace Intel specific PASID allocator with IOASID
Date: Thu, 24 Oct 2019 12:54:57 -0700 [thread overview]
Message-ID: <1571946904-86776-5-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1571946904-86776-1-git-send-email-jacob.jun.pan@linux.intel.com>
Make use of generic IOASID code to manage PASID allocation,
free, and lookup. Replace Intel specific code.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
drivers/iommu/intel-iommu.c | 12 ++++++------
drivers/iommu/intel-pasid.c | 36 ------------------------------------
drivers/iommu/intel-svm.c | 39 +++++++++++++++++++++++----------------
3 files changed, 29 insertions(+), 58 deletions(-)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index ced1d89ef977..2ea09b988a23 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -5311,7 +5311,7 @@ static void auxiliary_unlink_device(struct dmar_domain *domain,
domain->auxd_refcnt--;
if (!domain->auxd_refcnt && domain->default_pasid > 0)
- intel_pasid_free_id(domain->default_pasid);
+ ioasid_free(domain->default_pasid);
}
static int aux_domain_add_dev(struct dmar_domain *domain,
@@ -5329,10 +5329,10 @@ static int aux_domain_add_dev(struct dmar_domain *domain,
if (domain->default_pasid <= 0) {
int pasid;
- pasid = intel_pasid_alloc_id(domain, PASID_MIN,
- pci_max_pasids(to_pci_dev(dev)),
- GFP_KERNEL);
- if (pasid <= 0) {
+ /* No private data needed for the default pasid */
+ pasid = ioasid_alloc(NULL, PASID_MIN, pci_max_pasids(to_pci_dev(dev)) - 1,
+ NULL);
+ if (pasid == INVALID_IOASID) {
pr_err("Can't allocate default pasid\n");
return -ENODEV;
}
@@ -5368,7 +5368,7 @@ static int aux_domain_add_dev(struct dmar_domain *domain,
spin_unlock(&iommu->lock);
spin_unlock_irqrestore(&device_domain_lock, flags);
if (!domain->auxd_refcnt && domain->default_pasid > 0)
- intel_pasid_free_id(domain->default_pasid);
+ ioasid_free(domain->default_pasid);
return ret;
}
diff --git a/drivers/iommu/intel-pasid.c b/drivers/iommu/intel-pasid.c
index d81e857d2b25..e79d680fe300 100644
--- a/drivers/iommu/intel-pasid.c
+++ b/drivers/iommu/intel-pasid.c
@@ -26,42 +26,6 @@
*/
static DEFINE_SPINLOCK(pasid_lock);
u32 intel_pasid_max_id = PASID_MAX;
-static DEFINE_IDR(pasid_idr);
-
-int intel_pasid_alloc_id(void *ptr, int start, int end, gfp_t gfp)
-{
- int ret, min, max;
-
- min = max_t(int, start, PASID_MIN);
- max = min_t(int, end, intel_pasid_max_id);
-
- WARN_ON(in_interrupt());
- idr_preload(gfp);
- spin_lock(&pasid_lock);
- ret = idr_alloc(&pasid_idr, ptr, min, max, GFP_ATOMIC);
- spin_unlock(&pasid_lock);
- idr_preload_end();
-
- return ret;
-}
-
-void intel_pasid_free_id(int pasid)
-{
- spin_lock(&pasid_lock);
- idr_remove(&pasid_idr, pasid);
- spin_unlock(&pasid_lock);
-}
-
-void *intel_pasid_lookup_id(int pasid)
-{
- void *p;
-
- spin_lock(&pasid_lock);
- p = idr_find(&pasid_idr, pasid);
- spin_unlock(&pasid_lock);
-
- return p;
-}
int vcmd_alloc_pasid(struct intel_iommu *iommu, unsigned int *pasid)
{
diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index 9b159132405d..a9a7f85a09bc 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -17,6 +17,7 @@
#include <linux/dmar.h>
#include <linux/interrupt.h>
#include <linux/mm_types.h>
+#include <linux/ioasid.h>
#include <asm/page.h>
#include "intel-pasid.h"
@@ -318,16 +319,15 @@ int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_
if (pasid_max > intel_pasid_max_id)
pasid_max = intel_pasid_max_id;
- /* Do not use PASID 0 in caching mode (virtualised IOMMU) */
- ret = intel_pasid_alloc_id(svm,
- !!cap_caching_mode(iommu->cap),
- pasid_max - 1, GFP_KERNEL);
- if (ret < 0) {
+ /* Do not use PASID 0, reserved for RID to PASID */
+ svm->pasid = ioasid_alloc(NULL, PASID_MIN,
+ pasid_max - 1, svm);
+ if (svm->pasid == INVALID_IOASID) {
kfree(svm);
kfree(sdev);
+ ret = ENOSPC;
goto out;
}
- svm->pasid = ret;
svm->notifier.ops = &intel_mmuops;
svm->mm = mm;
svm->flags = flags;
@@ -337,7 +337,7 @@ int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_
if (mm) {
ret = mmu_notifier_register(&svm->notifier, mm);
if (ret) {
- intel_pasid_free_id(svm->pasid);
+ ioasid_free(svm->pasid);
kfree(svm);
kfree(sdev);
goto out;
@@ -353,7 +353,7 @@ int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_
if (ret) {
if (mm)
mmu_notifier_unregister(&svm->notifier, mm);
- intel_pasid_free_id(svm->pasid);
+ ioasid_free(svm->pasid);
kfree(svm);
kfree(sdev);
goto out;
@@ -401,7 +401,12 @@ int intel_svm_unbind_mm(struct device *dev, int pasid)
if (!iommu)
goto out;
- svm = intel_pasid_lookup_id(pasid);
+ svm = ioasid_find(NULL, pasid, NULL);
+ if (IS_ERR(svm)) {
+ ret = PTR_ERR(svm);
+ goto out;
+ }
+
if (!svm)
goto out;
@@ -423,7 +428,9 @@ int intel_svm_unbind_mm(struct device *dev, int pasid)
kfree_rcu(sdev, rcu);
if (list_empty(&svm->devs)) {
- intel_pasid_free_id(svm->pasid);
+ /* Clear private data so that free pass check */
+ ioasid_set_data(svm->pasid, NULL);
+ ioasid_free(svm->pasid);
if (svm->mm)
mmu_notifier_unregister(&svm->notifier, svm->mm);
@@ -458,10 +465,11 @@ int intel_svm_is_pasid_valid(struct device *dev, int pasid)
if (!iommu)
goto out;
- svm = intel_pasid_lookup_id(pasid);
- if (!svm)
+ svm = ioasid_find(NULL, pasid, NULL);
+ if (IS_ERR(svm)) {
+ ret = PTR_ERR(svm);
goto out;
-
+ }
/* init_mm is used in this case */
if (!svm->mm)
ret = 1;
@@ -568,13 +576,12 @@ static irqreturn_t prq_event_thread(int irq, void *d)
if (!svm || svm->pasid != req->pasid) {
rcu_read_lock();
- svm = intel_pasid_lookup_id(req->pasid);
+ svm = ioasid_find(NULL, req->pasid, NULL);
/* It *can't* go away, because the driver is not permitted
* to unbind the mm while any page faults are outstanding.
* So we only need RCU to protect the internal idr code. */
rcu_read_unlock();
-
- if (!svm) {
+ if (IS_ERR(svm) || !svm) {
pr_err("%s: Page request for invalid PASID %d: %08llx %08llx\n",
iommu->name, req->pasid, ((unsigned long long *)req)[0],
((unsigned long long *)req)[1]);
--
2.7.4
next prev parent reply other threads:[~2019-10-24 19:51 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 19:54 [PATCH v7 00/11] Nested Shared Virtual Address (SVA) VT-d support Jacob Pan
2019-10-24 19:54 ` [PATCH v7 01/11] iommu/vt-d: Cache virtual command capability register Jacob Pan
2019-10-25 2:53 ` Lu Baolu
2019-10-25 6:06 ` Tian, Kevin
2019-11-08 10:32 ` Auger Eric
2019-10-24 19:54 ` [PATCH v7 02/11] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-10-25 6:19 ` Tian, Kevin
2019-10-29 17:14 ` Jacob Pan
2019-10-29 18:16 ` Tian, Kevin
2019-11-08 10:33 ` Auger Eric
2019-11-08 22:22 ` Jacob Pan
2019-10-24 19:54 ` [PATCH v7 03/11] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-10-25 2:30 ` Lu Baolu
2019-10-25 4:43 ` Jacob Pan
2019-10-25 6:40 ` Tian, Kevin
2019-10-25 14:39 ` Lu Baolu
2019-10-25 15:52 ` Tian, Kevin
2019-10-28 22:49 ` Jacob Pan
2019-10-29 2:22 ` Lu Baolu
2019-10-25 6:31 ` Tian, Kevin
2019-10-28 22:52 ` Jacob Pan
2019-11-08 10:40 ` Auger Eric
2019-11-08 22:26 ` Jacob Pan
2019-10-24 19:54 ` Jacob Pan [this message]
2019-10-25 5:47 ` [PATCH v7 04/11] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Lu Baolu
2019-11-01 18:29 ` Jacob Pan
2019-10-25 6:41 ` Tian, Kevin
2019-10-28 22:46 ` Jacob Pan
2019-11-08 11:30 ` Auger Eric
2019-11-08 22:55 ` Jacob Pan
2019-11-12 9:54 ` Auger Eric
2019-10-24 19:54 ` [PATCH v7 05/11] iommu/vt-d: Move domain helper to header Jacob Pan
2019-10-25 5:26 ` Lu Baolu
2019-10-24 19:54 ` [PATCH v7 06/11] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-10-25 5:32 ` Lu Baolu
2019-10-25 6:42 ` Tian, Kevin
2019-10-28 22:41 ` Jacob Pan
2019-11-12 9:54 ` Auger Eric
2019-10-24 19:55 ` [PATCH v7 07/11] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-10-25 7:04 ` Tian, Kevin
2019-11-01 21:10 ` Jacob Pan
2019-10-25 15:04 ` Lu Baolu
2019-10-25 16:06 ` Jacob Pan
2019-11-08 13:55 ` Auger Eric
2019-10-24 19:55 ` [PATCH v7 08/11] iommu/vt-d: Misc macro clean up for SVM Jacob Pan
2019-10-26 1:00 ` Lu Baolu
2019-10-28 22:38 ` Jacob Pan
2019-10-24 19:55 ` [PATCH v7 09/11] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-10-25 7:19 ` Tian, Kevin
2019-10-25 17:33 ` Jacob Pan
2019-10-28 6:03 ` Tian, Kevin
2019-10-28 16:02 ` Jacob Pan
2019-10-29 7:57 ` Tian, Kevin
2019-10-29 16:11 ` Jacob Pan
2019-10-29 18:04 ` Tian, Kevin
2019-10-29 2:33 ` Lu Baolu
2019-10-26 2:01 ` Lu Baolu
2019-10-28 22:29 ` Jacob Pan
2019-10-29 2:54 ` Lu Baolu
2019-10-29 4:11 ` Jacob Pan
2019-10-29 5:04 ` Lu Baolu
2019-10-24 19:55 ` [PATCH v7 10/11] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-10-25 7:21 ` Tian, Kevin
2019-11-01 21:30 ` Jacob Pan
2019-10-26 2:22 ` Lu Baolu
2019-11-01 21:28 ` Jacob Pan
2019-11-08 16:18 ` Auger Eric
2019-11-08 23:05 ` Jacob Pan
2019-10-24 19:55 ` [PATCH v7 11/11] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-10-25 7:27 ` Tian, Kevin
2019-10-26 2:40 ` Lu Baolu
2019-10-26 7:03 ` Lu Baolu
2019-10-28 6:06 ` Tian, Kevin
2019-10-28 16:10 ` Jacob Pan
2019-10-29 18:52 ` Tian, Kevin
2019-10-29 19:25 ` Jacob Pan
2019-10-28 16:13 ` Jacob Pan
2019-11-12 10:28 ` Auger Eric
2020-02-15 1:18 ` Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1571946904-86776-5-git-send-email-jacob.jun.pan@linux.intel.com \
--to=jacob.jun.pan@linux.intel.com \
--cc=alex.williamson@redhat.com \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=hch@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe@linaro.com \
--cc=jic23@kernel.org \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).