[PATCH v7 08/11] iommu/vt-d: Misc macro clean up for SVM

[Jacob Pan <jacob.jun.pan@linux.intel.com>]

Use combined macros for_each_svm_dev() to simplify SVM device iteration
and error checking.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
---
 drivers/iommu/intel-svm.c | 89 ++++++++++++++++++++++-------------------------
 1 file changed, 42 insertions(+), 47 deletions(-)

diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index a9a7f85a09bc..a18b02a9709d 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -212,6 +212,10 @@ static const struct mmu_notifier_ops intel_mmuops = {
 static DEFINE_MUTEX(pasid_mutex);
 static LIST_HEAD(global_svm_list);
 
+#define for_each_svm_dev(svm, dev)			\
+	list_for_each_entry(sdev, &svm->devs, list)	\
+	if (dev == sdev->dev)				\
+
 int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_ops *ops)
 {
 	struct intel_iommu *iommu = intel_svm_device_to_iommu(dev);
@@ -257,15 +261,13 @@ int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_
 				goto out;
 			}
 
-			list_for_each_entry(sdev, &svm->devs, list) {
-				if (dev == sdev->dev) {
-					if (sdev->ops != ops) {
-						ret = -EBUSY;
-						goto out;
-					}
-					sdev->users++;
-					goto success;
+			for_each_svm_dev(svm, dev) {
+				if (sdev->ops != ops) {
+					ret = -EBUSY;
+					goto out;
 				}
+				sdev->users++;
+				goto success;
 			}
 
 			break;
@@ -402,50 +404,43 @@ int intel_svm_unbind_mm(struct device *dev, int pasid)
 		goto out;
 
 	svm = ioasid_find(NULL, pasid, NULL);
-	if (IS_ERR(svm)) {
+	if (IS_ERR_OR_NULL(svm)) {
 		ret = PTR_ERR(svm);
 		goto out;
 	}
 
-	if (!svm)
-		goto out;
-
-	list_for_each_entry(sdev, &svm->devs, list) {
-		if (dev == sdev->dev) {
-			ret = 0;
-			sdev->users--;
-			if (!sdev->users) {
-				list_del_rcu(&sdev->list);
-				/* Flush the PASID cache and IOTLB for this device.
-				 * Note that we do depend on the hardware *not* using
-				 * the PASID any more. Just as we depend on other
-				 * devices never using PASIDs that they have no right
-				 * to use. We have a *shared* PASID table, because it's
-				 * large and has to be physically contiguous. So it's
-				 * hard to be as defensive as we might like. */
-				intel_pasid_tear_down_entry(iommu, dev, svm->pasid);
-				intel_flush_svm_range_dev(svm, sdev, 0, -1, 0);
-				kfree_rcu(sdev, rcu);
-
-				if (list_empty(&svm->devs)) {
-					/* Clear private data so that free pass check */
-					ioasid_set_data(svm->pasid, NULL);
-					ioasid_free(svm->pasid);
-					if (svm->mm)
-						mmu_notifier_unregister(&svm->notifier, svm->mm);
-
-					list_del(&svm->list);
-
-					/* We mandate that no page faults may be outstanding
-					 * for the PASID when intel_svm_unbind_mm() is called.
-					 * If that is not obeyed, subtle errors will happen.
-					 * Let's make them less subtle... */
-					memset(svm, 0x6b, sizeof(*svm));
-					kfree(svm);
-				}
+	for_each_svm_dev(svm, dev) {
+		ret = 0;
+		sdev->users--;
+		if (!sdev->users) {
+			list_del_rcu(&sdev->list);
+			/* Flush the PASID cache and IOTLB for this device.
+			 * Note that we do depend on the hardware *not* using
+			 * the PASID any more. Just as we depend on other
+			 * devices never using PASIDs that they have no right
+			 * to use. We have a *shared* PASID table, because it's
+			 * large and has to be physically contiguous. So it's
+			 * hard to be as defensive as we might like. */
+			intel_pasid_tear_down_entry(iommu, dev, svm->pasid);
+			intel_flush_svm_range_dev(svm, sdev, 0, -1, 0);
+			kfree_rcu(sdev, rcu);
+
+			if (list_empty(&svm->devs)) {
+				/* Clear private data so that free pass check */
+				ioasid_set_data(svm->pasid, NULL);
+				ioasid_free(svm->pasid);
+				if (svm->mm)
+					mmu_notifier_unregister(&svm->notifier, svm->mm);
+				list_del(&svm->list);
+				/* We mandate that no page faults may be outstanding
+				 * for the PASID when intel_svm_unbind_mm() is called.
+				 * If that is not obeyed, subtle errors will happen.
+				 * Let's make them less subtle... */
+				memset(svm, 0x6b, sizeof(*svm));
+				kfree(svm);
 			}
-			break;
 		}
+		break;
 	}
  out:
 	mutex_unlock(&pasid_mutex);
@@ -581,7 +576,7 @@ static irqreturn_t prq_event_thread(int irq, void *d)
 			 * to unbind the mm while any page faults are outstanding.
 			 * So we only need RCU to protect the internal idr code. */
 			rcu_read_unlock();
-			if (IS_ERR(svm) || !svm) {
+			if (IS_ERR_OR_NULL(svm)) {
 				pr_err("%s: Page request for invalid PASID %d: %08llx %08llx\n",
 				       iommu->name, req->pasid, ((unsigned long long *)req)[0],
 				       ((unsigned long long *)req)[1]);
-- 
2.7.4