linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manish Narani <manish.narani@xilinx.com>
To: ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
	adrian.hunter@intel.com, michal.simek@xilinx.com,
	jolly.shah@xilinx.com, nava.manne@xilinx.com,
	rajan.vaja@xilinx.com, manish.narani@xilinx.com
Cc: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, git@xilinx.com
Subject: [PATCH v4 3/8] mmc: sdhci-of-arasan: Add sampling clock for a phy to use
Date: Tue, 29 Oct 2019 16:00:37 +0530	[thread overview]
Message-ID: <1572345042-101207-3-git-send-email-manish.narani@xilinx.com> (raw)
In-Reply-To: <1572345042-101207-1-git-send-email-manish.narani@xilinx.com>

There are some operations like setting the clock delays may need to have
two clocks, one for output path and one for input path. Adding input
path clock for some phys to use.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 151 +++++++++++++++++++++++++----
 1 file changed, 134 insertions(+), 17 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 701b6cc0f9a3..b75ba780f902 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -75,10 +75,14 @@ struct sdhci_arasan_soc_ctl_map {
  * struct sdhci_arasan_clk_data
  * @sdcardclk_hw:	Struct for the clock we might provide to a PHY.
  * @sdcardclk:		Pointer to normal 'struct clock' for sdcardclk_hw.
+ * @sampleclk_hw:	Struct for the clock we might provide to a PHY.
+ * @sampleclk:		Pointer to normal 'struct clock' for sampleclk_hw.
  */
 struct sdhci_arasan_clk_data {
 	struct clk_hw	sdcardclk_hw;
 	struct clk      *sdcardclk;
+	struct clk_hw	sampleclk_hw;
+	struct clk      *sampleclk;
 };
 
 /**
@@ -541,6 +545,33 @@ static const struct clk_ops arasan_sdcardclk_ops = {
 	.recalc_rate = sdhci_arasan_sdcardclk_recalc_rate,
 };
 
+/**
+ * sdhci_arasan_sampleclk_recalc_rate - Return the sampling clock rate
+ *
+ * Return the current actual rate of the sampling clock.  This can be used
+ * to communicate with out PHY.
+ *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate		The parent rate (should be rate of clk_xin).
+ * Returns the sample clock rate.
+ */
+static unsigned long sdhci_arasan_sampleclk_recalc_rate(struct clk_hw *hw,
+						      unsigned long parent_rate)
+
+{
+	struct sdhci_arasan_clk_data *clk_data =
+		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
+	struct sdhci_arasan_data *sdhci_arasan =
+		container_of(clk_data, struct sdhci_arasan_data, clk_data);
+	struct sdhci_host *host = sdhci_arasan->host;
+
+	return host->mmc->actual_clock;
+}
+
+static const struct clk_ops arasan_sampleclk_ops = {
+	.recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
+};
+
 /**
  * sdhci_arasan_update_clockmultiplier - Set corecfg_clockmultiplier
  *
@@ -620,28 +651,21 @@ static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
 }
 
 /**
- * sdhci_arasan_register_sdclk - Register the sdclk for a PHY to use
+ * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
  *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * Note: without seriously re-architecting SDHCI's clock code and testing on
- * all platforms, there's no way to create a totally beautiful clock here
- * with all clock ops implemented.  Instead, we'll just create a clock that can
- * be queried and set the CLK_GET_RATE_NOCACHE attribute to tell common clock
- * framework that we're doing things behind its back.  This should be sufficient
- * to create nice clean device tree bindings and later (if needed) we can try
- * re-architecting SDHCI if we see some benefit to it.
- *
  * @sdhci_arasan:	Our private data structure.
  * @clk_xin:		Pointer to the functional clock
  * @dev:		Pointer to our struct device.
  * Returns 0 on success and error value on error
  */
-static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
-				       struct clk *clk_xin,
-				       struct device *dev)
+static int
+sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
+				struct clk *clk_xin,
+				struct device *dev)
 {
 	struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data;
 	struct device_node *np = dev->of_node;
@@ -649,10 +673,6 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
 	const char *parent_clk_name;
 	int ret;
 
-	/* Providing a clock to the PHY is optional; no error if missing */
-	if (!of_find_property(np, "#clock-cells", NULL))
-		return 0;
-
 	ret = of_property_read_string_index(np, "clock-output-names", 0,
 					    &sdcardclk_init.name);
 	if (ret) {
@@ -674,7 +694,56 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
 	ret = of_clk_add_provider(np, of_clk_src_simple_get,
 				  clk_data->sdcardclk);
 	if (ret)
-		dev_err(dev, "Failed to add clock provider\n");
+		dev_err(dev, "Failed to add sdcard clock provider\n");
+
+	return ret;
+}
+
+/**
+ * sdhci_arasan_register_sampleclk - Register the sampleclk for a PHY to use
+ *
+ * Some PHY devices need to know what the actual card clock is.  In order for
+ * them to find out, we'll provide a clock through the common clock framework
+ * for them to query.
+ *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ * Returns 0 on success and error value on error
+ */
+static int
+sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
+				struct clk *clk_xin,
+				struct device *dev)
+{
+	struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data;
+	struct device_node *np = dev->of_node;
+	struct clk_init_data sampleclk_init;
+	const char *parent_clk_name;
+	int ret;
+
+	ret = of_property_read_string_index(np, "clock-output-names", 1,
+					    &sampleclk_init.name);
+	if (ret) {
+		dev_err(dev, "DT has #clock-cells but no clock-output-names\n");
+		return ret;
+	}
+
+	parent_clk_name = __clk_get_name(clk_xin);
+	sampleclk_init.parent_names = &parent_clk_name;
+	sampleclk_init.num_parents = 1;
+	sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
+	sampleclk_init.ops = &arasan_sampleclk_ops;
+
+	clk_data->sampleclk_hw.init = &sampleclk_init;
+	clk_data->sampleclk =
+		devm_clk_register(dev, &clk_data->sampleclk_hw);
+	clk_data->sampleclk_hw.init = NULL;
+
+	ret = of_clk_add_provider(np, of_clk_src_simple_get,
+				  clk_data->sampleclk);
+	if (ret)
+		dev_err(dev, "Failed to add sample clock provider\n");
 
 	return ret;
 }
@@ -697,6 +766,54 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
 	of_clk_del_provider(dev->of_node);
 }
 
+/**
+ * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use
+ *
+ * Some PHY devices need to know what the actual card clock is.  In order for
+ * them to find out, we'll provide a clock through the common clock framework
+ * for them to query.
+ *
+ * Note: without seriously re-architecting SDHCI's clock code and testing on
+ * all platforms, there's no way to create a totally beautiful clock here
+ * with all clock ops implemented.  Instead, we'll just create a clock that can
+ * be queried and set the CLK_GET_RATE_NOCACHE attribute to tell common clock
+ * framework that we're doing things behind its back.  This should be sufficient
+ * to create nice clean device tree bindings and later (if needed) we can try
+ * re-architecting SDHCI if we see some benefit to it.
+ *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ * Returns 0 on success and error value on error
+ */
+static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
+				       struct clk *clk_xin,
+				       struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	u32 num_clks = 0;
+	int ret;
+
+	/* Providing a clock to the PHY is optional; no error if missing */
+	if (of_property_read_u32(np, "#clock-cells", &num_clks) < 0)
+		return 0;
+
+	ret = sdhci_arasan_register_sdcardclk(sdhci_arasan, clk_xin, dev);
+	if (ret)
+		return ret;
+
+	if (num_clks) {
+		ret = sdhci_arasan_register_sampleclk(sdhci_arasan, clk_xin,
+						      dev);
+		if (ret) {
+			sdhci_arasan_unregister_sdclk(dev);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
 {
 	struct sdhci_host *host = sdhci_arasan->host;
-- 
2.17.1


  parent reply	other threads:[~2019-10-29 10:31 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-29 10:30 [PATCH v4 1/8] mmc: sdhci-of-arasan: Separate out clk related data to another structure Manish Narani
2019-10-29 10:30 ` [PATCH v4 2/8] dt-bindings: mmc: arasan: Update Documentation for the input clock Manish Narani
2019-10-29 18:40   ` Rob Herring
2019-10-31  8:52     ` Manish Narani
2019-10-29 10:30 ` Manish Narani [this message]
2019-10-29 10:30 ` [PATCH v4 4/8] dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI Manish Narani
2019-10-30 14:57   ` Ulf Hansson
2019-10-31  8:54     ` Manish Narani
2019-10-29 10:30 ` [PATCH v4 5/8] mmc: sdhci-of-arasan: Add support to set clock phase delays for SD Manish Narani
2019-10-29 10:30 ` [PATCH v4 6/8] firmware: xilinx: Add SDIO Tap Delay nodes Manish Narani
2019-10-29 10:30 ` [PATCH v4 7/8] dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller Manish Narani
2019-10-29 10:30 ` [PATCH v4 8/8] mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup Manish Narani

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1572345042-101207-3-git-send-email-manish.narani@xilinx.com \
    --to=manish.narani@xilinx.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=git@xilinx.com \
    --cc=jolly.shah@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michal.simek@xilinx.com \
    --cc=nava.manne@xilinx.com \
    --cc=rajan.vaja@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).