Fix bugs in X1000 and X1500 pinctrl drivers.

Fix bugs in X1000 and X1500 pinctrl drivers.

[Zhou Yanjie]

Fix the wrong configuration of pull-up and pull-down,
adjust some unreasonable naming.

[PATCH] pinctrl: Ingenic: Fix bugs in X1000 and X1500.

[Zhou Yanjie]

1.Fix the pullup parameter of X1000.
2.X1000 and X1500 have only one set of uart1 hwflow pin mapping,
  so modify "uart1_hwflow_d" to "uart1_hwflow".
3.X1000 has only one set of mmc1 pin mapping, so modify
  "mmc1-1bit-e/mmc1-4bit-e" to "mmc1-1bit/mmc1-4bit".
4.X1500 has only one set of mmc, so modify "mmc0_" to "mmc_".

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 drivers/pinctrl/pinctrl-ingenic.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 6e26830..64c8f6d 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1017,7 +1017,7 @@ static const struct ingenic_chip_info jz4780_chip_info = {
 };
 
 static const u32 x1000_pull_ups[4] = {
-	0xffffffff, 0x8dffffff, 0x7d3fffff, 0xffffffff,
+	0xffffffff, 0xfdffffff, 0x0dffffff, 0x0000003f,
 };
 
 static const u32 x1000_pull_downs[4] = {
@@ -1028,7 +1028,7 @@ static int x1000_uart0_data_pins[] = { 0x4a, 0x4b, };
 static int x1000_uart0_hwflow_pins[] = { 0x4c, 0x4d, };
 static int x1000_uart1_data_a_pins[] = { 0x04, 0x05, };
 static int x1000_uart1_data_d_pins[] = { 0x62, 0x63, };
-static int x1000_uart1_hwflow_d_pins[] = { 0x64, 0x65, };
+static int x1000_uart1_hwflow_pins[] = { 0x64, 0x65, };
 static int x1000_uart2_data_a_pins[] = { 0x02, 0x03, };
 static int x1000_uart2_data_d_pins[] = { 0x65, 0x64, };
 static int x1000_mmc0_1bit_pins[] = { 0x18, 0x19, 0x17, };
@@ -1078,7 +1078,7 @@ static int x1000_uart0_data_funcs[] = { 0, 0, };
 static int x1000_uart0_hwflow_funcs[] = { 0, 0, };
 static int x1000_uart1_data_a_funcs[] = { 2, 2, };
 static int x1000_uart1_data_d_funcs[] = { 1, 1, };
-static int x1000_uart1_hwflow_d_funcs[] = { 1, 1, };
+static int x1000_uart1_hwflow_funcs[] = { 1, 1, };
 static int x1000_uart2_data_a_funcs[] = { 2, 2, };
 static int x1000_uart2_data_d_funcs[] = { 0, 0, };
 static int x1000_mmc0_1bit_funcs[] = { 1, 1, 1, };
@@ -1116,7 +1116,7 @@ static const struct group_desc x1000_groups[] = {
 	INGENIC_PIN_GROUP("uart0-hwflow", x1000_uart0_hwflow),
 	INGENIC_PIN_GROUP("uart1-data-a", x1000_uart1_data_a),
 	INGENIC_PIN_GROUP("uart1-data-d", x1000_uart1_data_d),
-	INGENIC_PIN_GROUP("uart1-hwflow-d", x1000_uart1_hwflow_d),
+	INGENIC_PIN_GROUP("uart1-hwflow", x1000_uart1_hwflow),
 	INGENIC_PIN_GROUP("uart2-data-a", x1000_uart2_data_a),
 	INGENIC_PIN_GROUP("uart2-data-d", x1000_uart2_data_d),
 	INGENIC_PIN_GROUP("mmc0-1bit", x1000_mmc0_1bit),
@@ -1156,7 +1156,7 @@ static const char *x1000_mmc0_groups[] = {
 	"mmc0-1bit", "mmc0-4bit", "mmc0-8bit",
 };
 static const char *x1000_mmc1_groups[] = {
-	"mmc1-1bit-e", "mmc1-4bit-e",
+	"mmc1-1bit", "mmc1-4bit",
 };
 static const char *x1000_nemc_groups[] = {
 	"nemc-8bit-data", "nemc-16bit-data",
@@ -1224,11 +1224,11 @@ static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
 static int x1500_uart0_hwflow_pins[] = { 0x4c, 0x4d, };
 static int x1500_uart1_data_a_pins[] = { 0x04, 0x05, };
 static int x1500_uart1_data_d_pins[] = { 0x62, 0x63, };
-static int x1500_uart1_hwflow_d_pins[] = { 0x64, 0x65, };
+static int x1500_uart1_hwflow_pins[] = { 0x64, 0x65, };
 static int x1500_uart2_data_a_pins[] = { 0x02, 0x03, };
 static int x1500_uart2_data_d_pins[] = { 0x65, 0x64, };
-static int x1500_mmc0_1bit_pins[] = { 0x18, 0x19, 0x17, };
-static int x1500_mmc0_4bit_pins[] = { 0x16, 0x15, 0x14, };
+static int x1500_mmc_1bit_pins[] = { 0x18, 0x19, 0x17, };
+static int x1500_mmc_4bit_pins[] = { 0x16, 0x15, 0x14, };
 static int x1500_i2c0_pins[] = { 0x38, 0x37, };
 static int x1500_i2c1_a_pins[] = { 0x01, 0x00, };
 static int x1500_i2c1_c_pins[] = { 0x5b, 0x5a, };
@@ -1247,11 +1247,11 @@ static int x1500_uart0_data_funcs[] = { 0, 0, };
 static int x1500_uart0_hwflow_funcs[] = { 0, 0, };
 static int x1500_uart1_data_a_funcs[] = { 2, 2, };
 static int x1500_uart1_data_d_funcs[] = { 1, 1, };
-static int x1500_uart1_hwflow_d_funcs[] = { 1, 1, };
+static int x1500_uart1_hwflow_funcs[] = { 1, 1, };
 static int x1500_uart2_data_a_funcs[] = { 2, 2, };
 static int x1500_uart2_data_d_funcs[] = { 0, 0, };
-static int x1500_mmc0_1bit_funcs[] = { 1, 1, 1, };
-static int x1500_mmc0_4bit_funcs[] = { 1, 1, 1, };
+static int x1500_mmc_1bit_funcs[] = { 1, 1, 1, };
+static int x1500_mmc_4bit_funcs[] = { 1, 1, 1, };
 static int x1500_i2c0_funcs[] = { 0, 0, };
 static int x1500_i2c1_a_funcs[] = { 2, 2, };
 static int x1500_i2c1_c_funcs[] = { 0, 0, };
@@ -1268,11 +1268,11 @@ static const struct group_desc x1500_groups[] = {
 	INGENIC_PIN_GROUP("uart0-hwflow", x1500_uart0_hwflow),
 	INGENIC_PIN_GROUP("uart1-data-a", x1500_uart1_data_a),
 	INGENIC_PIN_GROUP("uart1-data-d", x1500_uart1_data_d),
-	INGENIC_PIN_GROUP("uart1-hwflow-d", x1500_uart1_hwflow_d),
+	INGENIC_PIN_GROUP("uart1-hwflow", x1500_uart1_hwflow),
 	INGENIC_PIN_GROUP("uart2-data-a", x1500_uart2_data_a),
 	INGENIC_PIN_GROUP("uart2-data-d", x1500_uart2_data_d),
-	INGENIC_PIN_GROUP("mmc0-1bit", x1500_mmc0_1bit),
-	INGENIC_PIN_GROUP("mmc0-4bit", x1500_mmc0_4bit),
+	INGENIC_PIN_GROUP("mmc-1bit", x1500_mmc_1bit),
+	INGENIC_PIN_GROUP("mmc-4bit", x1500_mmc_4bit),
 	INGENIC_PIN_GROUP("i2c0-data", x1500_i2c0),
 	INGENIC_PIN_GROUP("i2c1-data-a", x1500_i2c1_a),
 	INGENIC_PIN_GROUP("i2c1-data-c", x1500_i2c1_c),
@@ -1291,7 +1291,7 @@ static const char *x1500_uart1_groups[] = {
 	"uart1-data-a", "uart1-data-d", "uart1-hwflow-d",
 };
 static const char *x1500_uart2_groups[] = { "uart2-data-a", "uart2-data-d", };
-static const char *x1500_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", };
+static const char *x1500_mmc_groups[] = { "mmc-1bit", "mmc-4bit", };
 static const char *x1500_i2c0_groups[] = { "i2c0-data", };
 static const char *x1500_i2c1_groups[] = { "i2c1-data-a", "i2c1-data-c", };
 static const char *x1500_i2c2_groups[] = { "i2c2-data", };
@@ -1307,7 +1307,7 @@ static const struct function_desc x1500_functions[] = {
 	{ "uart0", x1500_uart0_groups, ARRAY_SIZE(x1500_uart0_groups), },
 	{ "uart1", x1500_uart1_groups, ARRAY_SIZE(x1500_uart1_groups), },
 	{ "uart2", x1500_uart2_groups, ARRAY_SIZE(x1500_uart2_groups), },
-	{ "mmc0", x1500_mmc0_groups, ARRAY_SIZE(x1500_mmc0_groups), },
+	{ "mmc", x1500_mmc_groups, ARRAY_SIZE(x1500_mmc_groups), },
 	{ "i2c0", x1500_i2c0_groups, ARRAY_SIZE(x1500_i2c0_groups), },
 	{ "i2c1", x1500_i2c1_groups, ARRAY_SIZE(x1500_i2c1_groups), },
 	{ "i2c2", x1500_i2c2_groups, ARRAY_SIZE(x1500_i2c2_groups), },
-- 
2.7.4

Fix bugs in X1000/X1500 and add X1830 pinctrl driver v2.

[Zhou Yanjie]

v1->v2:
1.Modify "nemc_" to "emc_" because X1000 has only one regular externel
  memory controller that does not support nand flash.
2.Add pinctrl drivers for the SPI flash controller (SFC) of X1000
  and X1500.
3.Add pinctrl driver for the synchronous serial interface (SSI)
  of X1000.
4.Add pinctrl bindings and pinctrl drivers for X1830 SoC.

[PATCH v2 1/4] pinctrl: Ingenic: Fix bugs in X1000 and X1500.

[Zhou Yanjie]

1.Fix the pullup parameter of X1000.
2.X1000 and X1500 have only one set of uart1 hwflow pin mapping,
  so modify "uart1_hwflow_d" to "uart1_hwflow".
3.X1000 has only one set of mmc1 pin mapping, so modify
  "mmc1-1bit-e/mmc1-4bit-e" to "mmc1-1bit/mmc1-4bit".
4.X1000 has only one regular externel memory controller that
  does not support nand flash, so change "nemc_" to "emc_".
5.X1500 has only one set of mmc, so modify "mmc0_" to "mmc_".

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---

Notes:
    v1->v2:
    Modify "nemc_" to "emc_" because X1000 has only one regular externel
    memory controller that does not support nand flash.

 drivers/pinctrl/pinctrl-ingenic.c | 94 +++++++++++++++++++--------------------
 1 file changed, 47 insertions(+), 47 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 6e26830..059e39a 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1017,7 +1017,7 @@ static const struct ingenic_chip_info jz4780_chip_info = {
 };
 
 static const u32 x1000_pull_ups[4] = {
-	0xffffffff, 0x8dffffff, 0x7d3fffff, 0xffffffff,
+	0xffffffff, 0xfdffffff, 0x0dffffff, 0x0000003f,
 };
 
 static const u32 x1000_pull_downs[4] = {
@@ -1028,7 +1028,7 @@ static int x1000_uart0_data_pins[] = { 0x4a, 0x4b, };
 static int x1000_uart0_hwflow_pins[] = { 0x4c, 0x4d, };
 static int x1000_uart1_data_a_pins[] = { 0x04, 0x05, };
 static int x1000_uart1_data_d_pins[] = { 0x62, 0x63, };
-static int x1000_uart1_hwflow_d_pins[] = { 0x64, 0x65, };
+static int x1000_uart1_hwflow_pins[] = { 0x64, 0x65, };
 static int x1000_uart2_data_a_pins[] = { 0x02, 0x03, };
 static int x1000_uart2_data_d_pins[] = { 0x65, 0x64, };
 static int x1000_mmc0_1bit_pins[] = { 0x18, 0x19, 0x17, };
@@ -1036,20 +1036,20 @@ static int x1000_mmc0_4bit_pins[] = { 0x16, 0x15, 0x14, };
 static int x1000_mmc0_8bit_pins[] = { 0x13, 0x12, 0x11, 0x10, };
 static int x1000_mmc1_1bit_pins[] = { 0x40, 0x41, 0x42, };
 static int x1000_mmc1_4bit_pins[] = { 0x43, 0x44, 0x45, };
-static int x1000_nemc_8bit_data_pins[] = {
+static int x1000_emc_8bit_data_pins[] = {
 	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
 };
-static int x1000_nemc_16bit_data_pins[] = {
+static int x1000_emc_16bit_data_pins[] = {
 	0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
 };
-static int x1000_nemc_addr_pins[] = {
+static int x1000_emc_addr_pins[] = {
 	0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
 	0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
 };
-static int x1000_nemc_rd_we_pins[] = { 0x30, 0x31, };
-static int x1000_nemc_wait_pins[] = { 0x34, };
-static int x1000_nemc_cs1_pins[] = { 0x32, };
-static int x1000_nemc_cs2_pins[] = { 0x33, };
+static int x1000_emc_rd_we_pins[] = { 0x30, 0x31, };
+static int x1000_emc_wait_pins[] = { 0x34, };
+static int x1000_emc_cs1_pins[] = { 0x32, };
+static int x1000_emc_cs2_pins[] = { 0x33, };
 static int x1000_i2c0_pins[] = { 0x38, 0x37, };
 static int x1000_i2c1_a_pins[] = { 0x01, 0x00, };
 static int x1000_i2c1_c_pins[] = { 0x5b, 0x5a, };
@@ -1078,7 +1078,7 @@ static int x1000_uart0_data_funcs[] = { 0, 0, };
 static int x1000_uart0_hwflow_funcs[] = { 0, 0, };
 static int x1000_uart1_data_a_funcs[] = { 2, 2, };
 static int x1000_uart1_data_d_funcs[] = { 1, 1, };
-static int x1000_uart1_hwflow_d_funcs[] = { 1, 1, };
+static int x1000_uart1_hwflow_funcs[] = { 1, 1, };
 static int x1000_uart2_data_a_funcs[] = { 2, 2, };
 static int x1000_uart2_data_d_funcs[] = { 0, 0, };
 static int x1000_mmc0_1bit_funcs[] = { 1, 1, 1, };
@@ -1086,15 +1086,15 @@ static int x1000_mmc0_4bit_funcs[] = { 1, 1, 1, };
 static int x1000_mmc0_8bit_funcs[] = { 1, 1, 1, 1, 1, };
 static int x1000_mmc1_1bit_funcs[] = { 0, 0, 0, };
 static int x1000_mmc1_4bit_funcs[] = { 0, 0, 0, };
-static int x1000_nemc_8bit_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
-static int x1000_nemc_16bit_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
-static int x1000_nemc_addr_funcs[] = {
+static int x1000_emc_8bit_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
+static int x1000_emc_16bit_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
+static int x1000_emc_addr_funcs[] = {
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 };
-static int x1000_nemc_rd_we_funcs[] = { 0, 0, };
-static int x1000_nemc_wait_funcs[] = { 0, };
-static int x1000_nemc_cs1_funcs[] = { 0, };
-static int x1000_nemc_cs2_funcs[] = { 0, };
+static int x1000_emc_rd_we_funcs[] = { 0, 0, };
+static int x1000_emc_wait_funcs[] = { 0, };
+static int x1000_emc_cs1_funcs[] = { 0, };
+static int x1000_emc_cs2_funcs[] = { 0, };
 static int x1000_i2c0_funcs[] = { 0, 0, };
 static int x1000_i2c1_a_funcs[] = { 2, 2, };
 static int x1000_i2c1_c_funcs[] = { 0, 0, };
@@ -1116,7 +1116,7 @@ static const struct group_desc x1000_groups[] = {
 	INGENIC_PIN_GROUP("uart0-hwflow", x1000_uart0_hwflow),
 	INGENIC_PIN_GROUP("uart1-data-a", x1000_uart1_data_a),
 	INGENIC_PIN_GROUP("uart1-data-d", x1000_uart1_data_d),
-	INGENIC_PIN_GROUP("uart1-hwflow-d", x1000_uart1_hwflow_d),
+	INGENIC_PIN_GROUP("uart1-hwflow", x1000_uart1_hwflow),
 	INGENIC_PIN_GROUP("uart2-data-a", x1000_uart2_data_a),
 	INGENIC_PIN_GROUP("uart2-data-d", x1000_uart2_data_d),
 	INGENIC_PIN_GROUP("mmc0-1bit", x1000_mmc0_1bit),
@@ -1124,13 +1124,13 @@ static const struct group_desc x1000_groups[] = {
 	INGENIC_PIN_GROUP("mmc0-8bit", x1000_mmc0_8bit),
 	INGENIC_PIN_GROUP("mmc1-1bit", x1000_mmc1_1bit),
 	INGENIC_PIN_GROUP("mmc1-4bit", x1000_mmc1_4bit),
-	INGENIC_PIN_GROUP("nemc-8bit-data", x1000_nemc_8bit_data),
-	INGENIC_PIN_GROUP("nemc-16bit-data", x1000_nemc_16bit_data),
-	INGENIC_PIN_GROUP("nemc-addr", x1000_nemc_addr),
-	INGENIC_PIN_GROUP("nemc-rd-we", x1000_nemc_rd_we),
-	INGENIC_PIN_GROUP("nemc-wait", x1000_nemc_wait),
-	INGENIC_PIN_GROUP("nemc-cs1", x1000_nemc_cs1),
-	INGENIC_PIN_GROUP("nemc-cs2", x1000_nemc_cs2),
+	INGENIC_PIN_GROUP("emc-8bit-data", x1000_emc_8bit_data),
+	INGENIC_PIN_GROUP("emc-16bit-data", x1000_emc_16bit_data),
+	INGENIC_PIN_GROUP("emc-addr", x1000_emc_addr),
+	INGENIC_PIN_GROUP("emc-rd-we", x1000_emc_rd_we),
+	INGENIC_PIN_GROUP("emc-wait", x1000_emc_wait),
+	INGENIC_PIN_GROUP("emc-cs1", x1000_emc_cs1),
+	INGENIC_PIN_GROUP("emc-cs2", x1000_emc_cs2),
 	INGENIC_PIN_GROUP("i2c0-data", x1000_i2c0),
 	INGENIC_PIN_GROUP("i2c1-data-a", x1000_i2c1_a),
 	INGENIC_PIN_GROUP("i2c1-data-c", x1000_i2c1_c),
@@ -1149,21 +1149,21 @@ static const struct group_desc x1000_groups[] = {
 
 static const char *x1000_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
 static const char *x1000_uart1_groups[] = {
-	"uart1-data-a", "uart1-data-d", "uart1-hwflow-d",
+	"uart1-data-a", "uart1-data-d", "uart1-hwflow",
 };
 static const char *x1000_uart2_groups[] = { "uart2-data-a", "uart2-data-d", };
 static const char *x1000_mmc0_groups[] = {
 	"mmc0-1bit", "mmc0-4bit", "mmc0-8bit",
 };
 static const char *x1000_mmc1_groups[] = {
-	"mmc1-1bit-e", "mmc1-4bit-e",
+	"mmc1-1bit", "mmc1-4bit",
 };
-static const char *x1000_nemc_groups[] = {
-	"nemc-8bit-data", "nemc-16bit-data",
-	"nemc-addr", "nemc-rd-we", "nemc-wait",
+static const char *x1000_emc_groups[] = {
+	"emc-8bit-data", "emc-16bit-data",
+	"emc-addr", "emc-rd-we", "emc-wait",
 };
-static const char *x1000_cs1_groups[] = { "nemc-cs1", };
-static const char *x1000_cs2_groups[] = { "nemc-cs2", };
+static const char *x1000_cs1_groups[] = { "emc-cs1", };
+static const char *x1000_cs2_groups[] = { "emc-cs2", };
 static const char *x1000_i2c0_groups[] = { "i2c0-data", };
 static const char *x1000_i2c1_groups[] = { "i2c1-data-a", "i2c1-data-c", };
 static const char *x1000_i2c2_groups[] = { "i2c2-data", };
@@ -1184,9 +1184,9 @@ static const struct function_desc x1000_functions[] = {
 	{ "uart2", x1000_uart2_groups, ARRAY_SIZE(x1000_uart2_groups), },
 	{ "mmc0", x1000_mmc0_groups, ARRAY_SIZE(x1000_mmc0_groups), },
 	{ "mmc1", x1000_mmc1_groups, ARRAY_SIZE(x1000_mmc1_groups), },
-	{ "nemc", x1000_nemc_groups, ARRAY_SIZE(x1000_nemc_groups), },
-	{ "nemc-cs1", x1000_cs1_groups, ARRAY_SIZE(x1000_cs1_groups), },
-	{ "nemc-cs2", x1000_cs2_groups, ARRAY_SIZE(x1000_cs2_groups), },
+	{ "emc", x1000_emc_groups, ARRAY_SIZE(x1000_emc_groups), },
+	{ "emc-cs1", x1000_cs1_groups, ARRAY_SIZE(x1000_cs1_groups), },
+	{ "emc-cs2", x1000_cs2_groups, ARRAY_SIZE(x1000_cs2_groups), },
 	{ "i2c0", x1000_i2c0_groups, ARRAY_SIZE(x1000_i2c0_groups), },
 	{ "i2c1", x1000_i2c1_groups, ARRAY_SIZE(x1000_i2c1_groups), },
 	{ "i2c2", x1000_i2c2_groups, ARRAY_SIZE(x1000_i2c2_groups), },
@@ -1224,11 +1224,11 @@ static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
 static int x1500_uart0_hwflow_pins[] = { 0x4c, 0x4d, };
 static int x1500_uart1_data_a_pins[] = { 0x04, 0x05, };
 static int x1500_uart1_data_d_pins[] = { 0x62, 0x63, };
-static int x1500_uart1_hwflow_d_pins[] = { 0x64, 0x65, };
+static int x1500_uart1_hwflow_pins[] = { 0x64, 0x65, };
 static int x1500_uart2_data_a_pins[] = { 0x02, 0x03, };
 static int x1500_uart2_data_d_pins[] = { 0x65, 0x64, };
-static int x1500_mmc0_1bit_pins[] = { 0x18, 0x19, 0x17, };
-static int x1500_mmc0_4bit_pins[] = { 0x16, 0x15, 0x14, };
+static int x1500_mmc_1bit_pins[] = { 0x18, 0x19, 0x17, };
+static int x1500_mmc_4bit_pins[] = { 0x16, 0x15, 0x14, };
 static int x1500_i2c0_pins[] = { 0x38, 0x37, };
 static int x1500_i2c1_a_pins[] = { 0x01, 0x00, };
 static int x1500_i2c1_c_pins[] = { 0x5b, 0x5a, };
@@ -1247,11 +1247,11 @@ static int x1500_uart0_data_funcs[] = { 0, 0, };
 static int x1500_uart0_hwflow_funcs[] = { 0, 0, };
 static int x1500_uart1_data_a_funcs[] = { 2, 2, };
 static int x1500_uart1_data_d_funcs[] = { 1, 1, };
-static int x1500_uart1_hwflow_d_funcs[] = { 1, 1, };
+static int x1500_uart1_hwflow_funcs[] = { 1, 1, };
 static int x1500_uart2_data_a_funcs[] = { 2, 2, };
 static int x1500_uart2_data_d_funcs[] = { 0, 0, };
-static int x1500_mmc0_1bit_funcs[] = { 1, 1, 1, };
-static int x1500_mmc0_4bit_funcs[] = { 1, 1, 1, };
+static int x1500_mmc_1bit_funcs[] = { 1, 1, 1, };
+static int x1500_mmc_4bit_funcs[] = { 1, 1, 1, };
 static int x1500_i2c0_funcs[] = { 0, 0, };
 static int x1500_i2c1_a_funcs[] = { 2, 2, };
 static int x1500_i2c1_c_funcs[] = { 0, 0, };
@@ -1268,11 +1268,11 @@ static const struct group_desc x1500_groups[] = {
 	INGENIC_PIN_GROUP("uart0-hwflow", x1500_uart0_hwflow),
 	INGENIC_PIN_GROUP("uart1-data-a", x1500_uart1_data_a),
 	INGENIC_PIN_GROUP("uart1-data-d", x1500_uart1_data_d),
-	INGENIC_PIN_GROUP("uart1-hwflow-d", x1500_uart1_hwflow_d),
+	INGENIC_PIN_GROUP("uart1-hwflow", x1500_uart1_hwflow),
 	INGENIC_PIN_GROUP("uart2-data-a", x1500_uart2_data_a),
 	INGENIC_PIN_GROUP("uart2-data-d", x1500_uart2_data_d),
-	INGENIC_PIN_GROUP("mmc0-1bit", x1500_mmc0_1bit),
-	INGENIC_PIN_GROUP("mmc0-4bit", x1500_mmc0_4bit),
+	INGENIC_PIN_GROUP("mmc-1bit", x1500_mmc_1bit),
+	INGENIC_PIN_GROUP("mmc-4bit", x1500_mmc_4bit),
 	INGENIC_PIN_GROUP("i2c0-data", x1500_i2c0),
 	INGENIC_PIN_GROUP("i2c1-data-a", x1500_i2c1_a),
 	INGENIC_PIN_GROUP("i2c1-data-c", x1500_i2c1_c),
@@ -1288,10 +1288,10 @@ static const struct group_desc x1500_groups[] = {
 
 static const char *x1500_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
 static const char *x1500_uart1_groups[] = {
-	"uart1-data-a", "uart1-data-d", "uart1-hwflow-d",
+	"uart1-data-a", "uart1-data-d", "uart1-hwflow",
 };
 static const char *x1500_uart2_groups[] = { "uart2-data-a", "uart2-data-d", };
-static const char *x1500_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", };
+static const char *x1500_mmc_groups[] = { "mmc-1bit", "mmc-4bit", };
 static const char *x1500_i2c0_groups[] = { "i2c0-data", };
 static const char *x1500_i2c1_groups[] = { "i2c1-data-a", "i2c1-data-c", };
 static const char *x1500_i2c2_groups[] = { "i2c2-data", };
@@ -1307,7 +1307,7 @@ static const struct function_desc x1500_functions[] = {
 	{ "uart0", x1500_uart0_groups, ARRAY_SIZE(x1500_uart0_groups), },
 	{ "uart1", x1500_uart1_groups, ARRAY_SIZE(x1500_uart1_groups), },
 	{ "uart2", x1500_uart2_groups, ARRAY_SIZE(x1500_uart2_groups), },
-	{ "mmc0", x1500_mmc0_groups, ARRAY_SIZE(x1500_mmc0_groups), },
+	{ "mmc", x1500_mmc_groups, ARRAY_SIZE(x1500_mmc_groups), },
 	{ "i2c0", x1500_i2c0_groups, ARRAY_SIZE(x1500_i2c0_groups), },
 	{ "i2c1", x1500_i2c1_groups, ARRAY_SIZE(x1500_i2c1_groups), },
 	{ "i2c2", x1500_i2c2_groups, ARRAY_SIZE(x1500_i2c2_groups), },
-- 
2.7.4

[PATCH v2 2/4] pinctrl: Ingenic: Add missing parts for X1000 and X1500.

[Zhou Yanjie]

1.Add pinctrl drivers for the SPI flash controller (SFC) of
  X1000 and X1500.
2.Add pinctrl driver for the synchronous serial interface (SSI)
  of X1000.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 drivers/pinctrl/pinctrl-ingenic.c | 64 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 059e39a..d578a74 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1031,6 +1031,23 @@ static int x1000_uart1_data_d_pins[] = { 0x62, 0x63, };
 static int x1000_uart1_hwflow_pins[] = { 0x64, 0x65, };
 static int x1000_uart2_data_a_pins[] = { 0x02, 0x03, };
 static int x1000_uart2_data_d_pins[] = { 0x65, 0x64, };
+static int x1000_sfc_pins[] = { 0x1d, 0x1c, 0x1e, 0x1f, 0x1a, 0x1b, };
+static int x1000_ssi_dt_a_22_pins[] = { 0x16, };
+static int x1000_ssi_dt_a_29_pins[] = { 0x1d, };
+static int x1000_ssi_dt_d_pins[] = { 0x62, };
+static int x1000_ssi_dr_a_23_pins[] = { 0x17, };
+static int x1000_ssi_dr_a_28_pins[] = { 0x1c, };
+static int x1000_ssi_dr_d_pins[] = { 0x63, };
+static int x1000_ssi_clk_a_24_pins[] = { 0x18, };
+static int x1000_ssi_clk_a_26_pins[] = { 0x1a, };
+static int x1000_ssi_clk_d_pins[] = { 0x60, };
+static int x1000_ssi_gpc_a_20_pins[] = { 0x14, };
+static int x1000_ssi_gpc_a_31_pins[] = { 0x1f, };
+static int x1000_ssi_ce0_a_25_pins[] = { 0x19, };
+static int x1000_ssi_ce0_a_27_pins[] = { 0x1b, };
+static int x1000_ssi_ce0_d_pins[] = { 0x61, };
+static int x1000_ssi_ce1_a_21_pins[] = { 0x15, };
+static int x1000_ssi_ce1_a_30_pins[] = { 0x1e, };
 static int x1000_mmc0_1bit_pins[] = { 0x18, 0x19, 0x17, };
 static int x1000_mmc0_4bit_pins[] = { 0x16, 0x15, 0x14, };
 static int x1000_mmc0_8bit_pins[] = { 0x13, 0x12, 0x11, 0x10, };
@@ -1081,6 +1098,23 @@ static int x1000_uart1_data_d_funcs[] = { 1, 1, };
 static int x1000_uart1_hwflow_funcs[] = { 1, 1, };
 static int x1000_uart2_data_a_funcs[] = { 2, 2, };
 static int x1000_uart2_data_d_funcs[] = { 0, 0, };
+static int x1000_sfc_funcs[] = { 1, 1, 1, 1, 1, 1, };
+static int x1000_ssi_dt_a_22_funcs[] = { 2, };
+static int x1000_ssi_dt_a_29_funcs[] = { 2, };
+static int x1000_ssi_dt_d_funcs[] = { 0, };
+static int x1000_ssi_dr_a_23_funcs[] = { 2, };
+static int x1000_ssi_dr_a_28_funcs[] = { 2, };
+static int x1000_ssi_dr_d_funcs[] = { 0, };
+static int x1000_ssi_clk_a_24_funcs[] = { 2, };
+static int x1000_ssi_clk_a_26_funcs[] = { 2, };
+static int x1000_ssi_clk_d_funcs[] = { 0, };
+static int x1000_ssi_gpc_a_20_funcs[] = { 2, };
+static int x1000_ssi_gpc_a_31_funcs[] = { 2, };
+static int x1000_ssi_ce0_a_25_funcs[] = { 2, };
+static int x1000_ssi_ce0_a_27_funcs[] = { 2, };
+static int x1000_ssi_ce0_d_funcs[] = { 0, };
+static int x1000_ssi_ce1_a_21_funcs[] = { 2, };
+static int x1000_ssi_ce1_a_30_funcs[] = { 2, };
 static int x1000_mmc0_1bit_funcs[] = { 1, 1, 1, };
 static int x1000_mmc0_4bit_funcs[] = { 1, 1, 1, };
 static int x1000_mmc0_8bit_funcs[] = { 1, 1, 1, 1, 1, };
@@ -1119,6 +1153,23 @@ static const struct group_desc x1000_groups[] = {
 	INGENIC_PIN_GROUP("uart1-hwflow", x1000_uart1_hwflow),
 	INGENIC_PIN_GROUP("uart2-data-a", x1000_uart2_data_a),
 	INGENIC_PIN_GROUP("uart2-data-d", x1000_uart2_data_d),
+	INGENIC_PIN_GROUP("sfc", x1000_sfc),
+	INGENIC_PIN_GROUP("ssi_dt_a_22", x1000_ssi_dt_a_22),
+	INGENIC_PIN_GROUP("ssi_dt_a_29", x1000_ssi_dt_a_29),
+	INGENIC_PIN_GROUP("ssi_dt_d", x1000_ssi_dt_d),
+	INGENIC_PIN_GROUP("ssi_dr_a_23", x1000_ssi_dr_a_23),
+	INGENIC_PIN_GROUP("ssi_dr_a_28", x1000_ssi_dr_a_28),
+	INGENIC_PIN_GROUP("ssi_dr_d", x1000_ssi_dr_d),
+	INGENIC_PIN_GROUP("ssi_clk_a_24", x1000_ssi_clk_a_24),
+	INGENIC_PIN_GROUP("ssi_clk_a_26", x1000_ssi_clk_a_26),
+	INGENIC_PIN_GROUP("ssi_clk_d", x1000_ssi_clk_d),
+	INGENIC_PIN_GROUP("ssi_gpc_a_20", x1000_ssi_gpc_a_20),
+	INGENIC_PIN_GROUP("ssi_gpc_a_31", x1000_ssi_gpc_a_31),
+	INGENIC_PIN_GROUP("ssi_ce0_a_25", x1000_ssi_ce0_a_25),
+	INGENIC_PIN_GROUP("ssi_ce0_a_27", x1000_ssi_ce0_a_27),
+	INGENIC_PIN_GROUP("ssi_ce0_d", x1000_ssi_ce0_d),
+	INGENIC_PIN_GROUP("ssi_ce1_a_21", x1000_ssi_ce1_a_21),
+	INGENIC_PIN_GROUP("ssi_ce1_a_30", x1000_ssi_ce1_a_30),
 	INGENIC_PIN_GROUP("mmc0-1bit", x1000_mmc0_1bit),
 	INGENIC_PIN_GROUP("mmc0-4bit", x1000_mmc0_4bit),
 	INGENIC_PIN_GROUP("mmc0-8bit", x1000_mmc0_8bit),
@@ -1152,6 +1203,15 @@ static const char *x1000_uart1_groups[] = {
 	"uart1-data-a", "uart1-data-d", "uart1-hwflow",
 };
 static const char *x1000_uart2_groups[] = { "uart2-data-a", "uart2-data-d", };
+static const char *x1000_sfc_groups[] = { "sfc", };
+static const char *x1000_ssi_groups[] = {
+	"ssi_dt_a_22", "ssi_dt_a_29", "ssi_dt_d",
+	"ssi_dr_a_23", "ssi_dr_a_28", "ssi_dr_d",
+	"ssi_clk_a_24", "ssi_clk_a_26", "ssi_clk_d",
+	"ssi_gpc_a_20", "ssi_gpc_a_31",
+	"ssi_ce0_a_25", "ssi_ce0_a_27", "ssi_ce0_d",
+	"ssi_ce1_a_21", "ssi_ce1_a_30", "ssi_ce0_d",
+};
 static const char *x1000_mmc0_groups[] = {
 	"mmc0-1bit", "mmc0-4bit", "mmc0-8bit",
 };
@@ -1182,6 +1242,8 @@ static const struct function_desc x1000_functions[] = {
 	{ "uart0", x1000_uart0_groups, ARRAY_SIZE(x1000_uart0_groups), },
 	{ "uart1", x1000_uart1_groups, ARRAY_SIZE(x1000_uart1_groups), },
 	{ "uart2", x1000_uart2_groups, ARRAY_SIZE(x1000_uart2_groups), },
+	{ "sfc", x1000_sfc_groups, ARRAY_SIZE(x1000_sfc_groups), },
+	{ "ssi", x1000_ssi_groups, ARRAY_SIZE(x1000_ssi_groups), },
 	{ "mmc0", x1000_mmc0_groups, ARRAY_SIZE(x1000_mmc0_groups), },
 	{ "mmc1", x1000_mmc1_groups, ARRAY_SIZE(x1000_mmc1_groups), },
 	{ "emc", x1000_emc_groups, ARRAY_SIZE(x1000_emc_groups), },
@@ -1271,6 +1333,7 @@ static const struct group_desc x1500_groups[] = {
 	INGENIC_PIN_GROUP("uart1-hwflow", x1500_uart1_hwflow),
 	INGENIC_PIN_GROUP("uart2-data-a", x1500_uart2_data_a),
 	INGENIC_PIN_GROUP("uart2-data-d", x1500_uart2_data_d),
+	INGENIC_PIN_GROUP("sfc", x1000_sfc),
 	INGENIC_PIN_GROUP("mmc-1bit", x1500_mmc_1bit),
 	INGENIC_PIN_GROUP("mmc-4bit", x1500_mmc_4bit),
 	INGENIC_PIN_GROUP("i2c0-data", x1500_i2c0),
@@ -1307,6 +1370,7 @@ static const struct function_desc x1500_functions[] = {
 	{ "uart0", x1500_uart0_groups, ARRAY_SIZE(x1500_uart0_groups), },
 	{ "uart1", x1500_uart1_groups, ARRAY_SIZE(x1500_uart1_groups), },
 	{ "uart2", x1500_uart2_groups, ARRAY_SIZE(x1500_uart2_groups), },
+	{ "sfc", x1000_sfc_groups, ARRAY_SIZE(x1000_sfc_groups), },
 	{ "mmc", x1500_mmc_groups, ARRAY_SIZE(x1500_mmc_groups), },
 	{ "i2c0", x1500_i2c0_groups, ARRAY_SIZE(x1500_i2c0_groups), },
 	{ "i2c1", x1500_i2c1_groups, ARRAY_SIZE(x1500_i2c1_groups), },
-- 
2.7.4

[PATCH v2 3/4] dt-bindings: pinctrl: Add bindings for Ingenic X1830.

[Zhou Yanjie]

Add the pinctrl bindings for the X1830 Soc from Ingenic.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
index 0014d98..d9b2100 100644
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
@@ -10,9 +10,9 @@ GPIO port configuration registers and it is typical to refer to pins using the
 naming scheme "PxN" where x is a character identifying the GPIO port with
 which the pin is associated and N is an integer from 0 to 31 identifying the
 pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
-PB31 is the last pin in GPIO port B. The jz4740 and the x1000 contains 4 GPIO
-ports, PA to PD, for a total of 128 pins. The jz4760, the jz4770 and the jz4780
-contains 6 GPIO ports, PA to PF, for a total of 192 pins.
+PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830
+contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the
+jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins.
 
 
 Required properties:
@@ -28,6 +28,7 @@ Required properties:
     - "ingenic,x1000-pinctrl"
     - "ingenic,x1000e-pinctrl"
     - "ingenic,x1500-pinctrl"
+    - "ingenic,x1830-pinctrl"
  - reg: Address range of the pinctrl registers.
 
 
@@ -40,6 +41,7 @@ Required properties for sub-nodes (GPIO chips):
     - "ingenic,jz4770-gpio"
     - "ingenic,jz4780-gpio"
     - "ingenic,x1000-gpio"
+    - "ingenic,x1830-gpio"
  - reg: The GPIO bank number.
  - interrupt-controller: Marks the device node as an interrupt controller.
  - interrupts: Interrupt specifier for the controllers interrupt.
-- 
2.7.4

[PATCH v2 4/4] pinctrl: Ingenic: Add pinctrl driver for X1830.

[Zhou Yanjie]

Add support for probing the pinctrl-ingenic driver on the
X1830 Soc from Ingenic.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 drivers/pinctrl/pinctrl-ingenic.c | 263 +++++++++++++++++++++++++++++++++++---
 1 file changed, 245 insertions(+), 18 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index d578a74..554bc2c 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -28,6 +28,10 @@
 #define GPIO_PIN	0x00
 #define GPIO_MSK	0x20
 
+#define GPIO_HIZ		0x00
+#define GPIO_PULLUP		0x01
+#define GPIO_PULLDOWN	0x10
+
 #define JZ4740_GPIO_DATA	0x10
 #define JZ4740_GPIO_PULL_DIS	0x30
 #define JZ4740_GPIO_FUNC	0x40
@@ -45,6 +49,11 @@
 #define X1000_GPIO_PZ_BASE		0x700
 #define X1000_GPIO_PZ_GID2LD	0x7f0
 
+#define X1830_GPIO_PEL0			0x110
+#define X1830_GPIO_PEL1			0x120
+#define X1830_GPIO_PZ_BASE		0x7000
+#define X1830_GPIO_PZ_GID2LD	0x70f0
+
 #define REG_SET(x) ((x) + 0x4)
 #define REG_CLEAR(x) ((x) + 0x8)
 
@@ -60,6 +69,7 @@ enum jz_version {
 	ID_X1000,
 	ID_X1000E,
 	ID_X1500,
+	ID_X1830,
 };
 
 struct ingenic_chip_info {
@@ -1394,6 +1404,156 @@ static const struct ingenic_chip_info x1500_chip_info = {
 	.pull_downs = x1000_pull_downs,
 };
 
+static const u32 x1830_pull_ups[4] = {
+	0x5fdfffc0, 0xffffefff, 0x1ffffbff, 0x0fcff3fc,
+};
+
+static const u32 x1830_pull_downs[4] = {
+	0x5fdfffc0, 0xffffefff, 0x1ffffbff, 0x0fcff3fc,
+};
+
+static int x1830_uart0_data_pins[] = { 0x33, 0x36, };
+static int x1830_uart0_hwflow_pins[] = { 0x34, 0x35, };
+static int x1830_uart1_data_pins[] = { 0x38, 0x37, };
+static int x1830_sfc_pins[] = { 0x17, 0x18, 0x1a, 0x19, 0x1b, 0x1c, };
+static int x1830_ssi0_dt_pins[] = { 0x4c, };
+static int x1830_ssi0_dr_pins[] = { 0x4b, };
+static int x1830_ssi0_clk_pins[] = { 0x4f, };
+static int x1830_ssi0_gpc_pins[] = { 0x4d, };
+static int x1830_ssi0_ce0_pins[] = { 0x50, };
+static int x1830_ssi0_ce1_pins[] = { 0x4e, };
+static int x1830_ssi1_dt_c_pins[] = { 0x53, };
+static int x1830_ssi1_dr_c_pins[] = { 0x54, };
+static int x1830_ssi1_clk_c_pins[] = { 0x57, };
+static int x1830_ssi1_gpc_c_pins[] = { 0x55, };
+static int x1830_ssi1_ce0_c_pins[] = { 0x58, };
+static int x1830_ssi1_ce1_c_pins[] = { 0x56, };
+static int x1830_ssi1_dt_d_pins[] = { 0x62, };
+static int x1830_ssi1_dr_d_pins[] = { 0x63, };
+static int x1830_ssi1_clk_d_pins[] = { 0x66, };
+static int x1830_ssi1_gpc_d_pins[] = { 0x64, };
+static int x1830_ssi1_ce0_d_pins[] = { 0x67, };
+static int x1830_ssi1_ce1_d_pins[] = { 0x65, };
+static int x1830_mmc0_1bit_pins[] = { 0x24, 0x25, 0x20, };
+static int x1830_mmc0_4bit_pins[] = { 0x21, 0x22, 0x23, };
+static int x1830_mmc1_1bit_pins[] = { 0x42, 0x43, 0x44, };
+static int x1830_mmc1_4bit_pins[] = { 0x45, 0x46, 0x47, };
+static int x1830_i2c0_pins[] = { 0x0c, 0x0d, };
+static int x1830_i2c1_pins[] = { 0x39, 0x3a, };
+static int x1830_i2c2_pins[] = { 0x5b, 0x5c, };
+static int x1830_mac_pins[] = {
+	0x29, 0x30, 0x2f, 0x28, 0x2e, 0x2d, 0x2a, 0x2b, 0x26, 0x27,
+};
+
+static int x1830_uart0_data_funcs[] = { 0, 0, };
+static int x1830_uart0_hwflow_funcs[] = { 0, 0, };
+static int x1830_uart1_data_funcs[] = { 0, 0, };
+static int x1830_sfc_funcs[] = { 1, 1, 1, 1, 1, 1, };
+static int x1830_ssi0_dt_funcs[] = { 0, };
+static int x1830_ssi0_dr_funcs[] = { 0, };
+static int x1830_ssi0_clk_funcs[] = { 0, };
+static int x1830_ssi0_gpc_funcs[] = { 0, };
+static int x1830_ssi0_ce0_funcs[] = { 0, };
+static int x1830_ssi0_ce1_funcs[] = { 0, };
+static int x1830_ssi1_dt_c_funcs[] = { 1, };
+static int x1830_ssi1_dr_c_funcs[] = { 1, };
+static int x1830_ssi1_clk_c_funcs[] = { 1, };
+static int x1830_ssi1_gpc_c_funcs[] = { 1, };
+static int x1830_ssi1_ce0_c_funcs[] = { 1, };
+static int x1830_ssi1_ce1_c_funcs[] = { 1, };
+static int x1830_ssi1_dt_d_funcs[] = { 2, };
+static int x1830_ssi1_dr_d_funcs[] = { 2, };
+static int x1830_ssi1_clk_d_funcs[] = { 2, };
+static int x1830_ssi1_gpc_d_funcs[] = { 2, };
+static int x1830_ssi1_ce0_d_funcs[] = { 2, };
+static int x1830_ssi1_ce1_d_funcs[] = { 2, };
+static int x1830_mmc0_1bit_funcs[] = { 0, 0, 0, };
+static int x1830_mmc0_4bit_funcs[] = { 0, 0, 0, };
+static int x1830_mmc1_1bit_funcs[] = { 0, 0, 0, };
+static int x1830_mmc1_4bit_funcs[] = { 0, 0, 0, };
+static int x1830_i2c0_funcs[] = { 1, 1, };
+static int x1830_i2c1_funcs[] = { 0, 0, };
+static int x1830_i2c2_funcs[] = { 1, 1, };
+static int x1830_mac_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, };
+
+static const struct group_desc x1830_groups[] = {
+	INGENIC_PIN_GROUP("uart0-data", x1830_uart0_data),
+	INGENIC_PIN_GROUP("uart0-hwflow", x1830_uart0_hwflow),
+	INGENIC_PIN_GROUP("uart1-data", x1830_uart1_data),
+	INGENIC_PIN_GROUP("sfc", x1830_sfc),
+	INGENIC_PIN_GROUP("ssi0_dt", x1830_ssi0_dt),
+	INGENIC_PIN_GROUP("ssi0_dr", x1830_ssi0_dr),
+	INGENIC_PIN_GROUP("ssi0_clk", x1830_ssi0_clk),
+	INGENIC_PIN_GROUP("ssi0_gpc", x1830_ssi0_gpc),
+	INGENIC_PIN_GROUP("ssi0_ce0", x1830_ssi0_ce0),
+	INGENIC_PIN_GROUP("ssi0_ce1", x1830_ssi0_ce1),
+	INGENIC_PIN_GROUP("ssi1_dt_c", x1830_ssi1_dt_c),
+	INGENIC_PIN_GROUP("ssi1_dr_c", x1830_ssi1_dr_c),
+	INGENIC_PIN_GROUP("ssi1_clk_c", x1830_ssi1_clk_c),
+	INGENIC_PIN_GROUP("ssi1_gpc_c", x1830_ssi1_gpc_c),
+	INGENIC_PIN_GROUP("ssi1_ce0_c", x1830_ssi1_ce0_c),
+	INGENIC_PIN_GROUP("ssi1_ce1_c", x1830_ssi1_ce1_c),
+	INGENIC_PIN_GROUP("ssi1_dt_d", x1830_ssi1_dt_d),
+	INGENIC_PIN_GROUP("ssi1_dr_d", x1830_ssi1_dr_d),
+	INGENIC_PIN_GROUP("ssi1_clk_d", x1830_ssi1_clk_d),
+	INGENIC_PIN_GROUP("ssi1_gpc_d", x1830_ssi1_gpc_d),
+	INGENIC_PIN_GROUP("ssi1_ce0_d", x1830_ssi1_ce0_d),
+	INGENIC_PIN_GROUP("ssi1_ce1_d", x1830_ssi1_ce1_d),
+	INGENIC_PIN_GROUP("mmc0-1bit", x1830_mmc0_1bit),
+	INGENIC_PIN_GROUP("mmc0-4bit", x1830_mmc0_4bit),
+	INGENIC_PIN_GROUP("mmc1-1bit", x1830_mmc1_1bit),
+	INGENIC_PIN_GROUP("mmc1-4bit", x1830_mmc1_4bit),
+	INGENIC_PIN_GROUP("i2c0-data", x1830_i2c0),
+	INGENIC_PIN_GROUP("i2c1-data", x1830_i2c1),
+	INGENIC_PIN_GROUP("i2c2-data", x1830_i2c2),
+	INGENIC_PIN_GROUP("mac", x1830_mac),
+};
+
+static const char *x1830_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
+static const char *x1830_uart1_groups[] = { "uart1-data", };
+static const char *x1830_sfc_groups[] = { "sfc", };
+static const char *x1830_ssi0_groups[] = {
+	"ssi0_dt", "ssi0_dr", "ssi0_clk", "ssi0_gpc", "ssi0_ce0", "ssi0_ce1",
+};
+static const char *x1830_ssi1_groups[] = {
+	"ssi1_dt_c", "ssi1_dt_d",
+	"ssi1_dr_c", "ssi1_dr_d",
+	"ssi1_clk_c", "ssi1_clk_d",
+	"ssi1_gpc_c", "ssi1_gpc_d",
+	"ssi1_ce0_c", "ssi1_ce0_d",
+	"ssi1_ce1_c", "ssi1_ce1_d",
+};
+static const char *x1830_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", };
+static const char *x1830_mmc1_groups[] = { "mmc1-1bit", "mmc1-4bit", };
+static const char *x1830_i2c0_groups[] = { "i2c0-data", };
+static const char *x1830_i2c1_groups[] = { "i2c1-data", };
+static const char *x1830_i2c2_groups[] = { "i2c2-data", };
+static const char *x1830_mac_groups[] = { "mac", };
+
+static const struct function_desc x1830_functions[] = {
+	{ "uart0", x1830_uart0_groups, ARRAY_SIZE(x1830_uart0_groups), },
+	{ "uart1", x1830_uart1_groups, ARRAY_SIZE(x1830_uart1_groups), },
+	{ "sfc", x1830_sfc_groups, ARRAY_SIZE(x1830_sfc_groups), },
+	{ "ssi0", x1830_ssi0_groups, ARRAY_SIZE(x1830_ssi0_groups), },
+	{ "ssi1", x1830_ssi1_groups, ARRAY_SIZE(x1830_ssi1_groups), },
+	{ "mmc0", x1830_mmc0_groups, ARRAY_SIZE(x1830_mmc0_groups), },
+	{ "mmc1", x1830_mmc1_groups, ARRAY_SIZE(x1830_mmc1_groups), },
+	{ "i2c0", x1830_i2c0_groups, ARRAY_SIZE(x1830_i2c0_groups), },
+	{ "i2c1", x1830_i2c1_groups, ARRAY_SIZE(x1830_i2c1_groups), },
+	{ "i2c2", x1830_i2c2_groups, ARRAY_SIZE(x1830_i2c2_groups), },
+	{ "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), },
+};
+
+static const struct ingenic_chip_info x1830_chip_info = {
+	.num_chips = 4,
+	.groups = x1830_groups,
+	.num_groups = ARRAY_SIZE(x1830_groups),
+	.functions = x1830_functions,
+	.num_functions = ARRAY_SIZE(x1830_functions),
+	.pull_ups = x1830_pull_ups,
+	.pull_downs = x1830_pull_downs,
+};
+
 static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
 {
 	unsigned int val;
@@ -1422,13 +1582,20 @@ static void ingenic_gpio_shadow_set_bit(struct ingenic_gpio_chip *jzgc,
 	else
 		reg = REG_CLEAR(reg);
 
-	regmap_write(jzgc->jzpc->map, X1000_GPIO_PZ_BASE + reg, BIT(offset));
+	if (jzgc->jzpc->version >= ID_X1830)
+		regmap_write(jzgc->jzpc->map, X1830_GPIO_PZ_BASE + reg, BIT(offset));
+	else
+		regmap_write(jzgc->jzpc->map, X1000_GPIO_PZ_BASE + reg, BIT(offset));
 }
 
 static void ingenic_gpio_shadow_set_bit_load(struct ingenic_gpio_chip *jzgc)
 {
-	regmap_write(jzgc->jzpc->map, X1000_GPIO_PZ_GID2LD,
-			jzgc->gc.base / PINS_PER_GPIO_CHIP);
+	if (jzgc->jzpc->version >= ID_X1830)
+		regmap_write(jzgc->jzpc->map, X1830_GPIO_PZ_GID2LD,
+				jzgc->gc.base / PINS_PER_GPIO_CHIP);
+	else
+		regmap_write(jzgc->jzpc->map, X1000_GPIO_PZ_GID2LD,
+				jzgc->gc.base / PINS_PER_GPIO_CHIP);
 }
 
 static inline bool ingenic_gpio_get_value(struct ingenic_gpio_chip *jzgc,
@@ -1670,8 +1837,12 @@ static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc,
 	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
 	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
 
-	regmap_write(jzpc->map, offt * 0x100 +
-			(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
+	if (jzpc->version >= ID_X1830)
+		regmap_write(jzpc->map, offt * 0x1000 +
+				(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
+	else
+		regmap_write(jzpc->map, offt * 0x100 +
+				(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
 }
 
 static inline void ingenic_shadow_config_pin(struct ingenic_pinctrl *jzpc,
@@ -1679,14 +1850,23 @@ static inline void ingenic_shadow_config_pin(struct ingenic_pinctrl *jzpc,
 {
 	unsigned int idx = pin % PINS_PER_GPIO_CHIP;
 
-	regmap_write(jzpc->map, X1000_GPIO_PZ_BASE +
-			(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
+	if (jzpc->version >= ID_X1830)
+		regmap_write(jzpc->map, X1830_GPIO_PZ_BASE +
+				(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
+	else
+		regmap_write(jzpc->map, X1000_GPIO_PZ_BASE +
+				(set ? REG_SET(reg) : REG_CLEAR(reg)), BIT(idx));
 }
 
 static inline void ingenic_shadow_config_pin_load(struct ingenic_pinctrl *jzpc,
 		unsigned int pin)
 {
-	regmap_write(jzpc->map, X1000_GPIO_PZ_GID2LD, pin / PINS_PER_GPIO_CHIP);
+	if (jzpc->version >= ID_X1830)
+		regmap_write(jzpc->map, X1830_GPIO_PZ_GID2LD,
+				pin / PINS_PER_GPIO_CHIP);
+	else
+		regmap_write(jzpc->map, X1000_GPIO_PZ_GID2LD,
+				pin / PINS_PER_GPIO_CHIP);
 }
 
 static inline bool ingenic_get_pin_config(struct ingenic_pinctrl *jzpc,
@@ -1696,7 +1876,10 @@ static inline bool ingenic_get_pin_config(struct ingenic_pinctrl *jzpc,
 	unsigned int offt = pin / PINS_PER_GPIO_CHIP;
 	unsigned int val;
 
-	regmap_read(jzpc->map, offt * 0x100 + reg, &val);
+	if (jzpc->version >= ID_X1830)
+		regmap_read(jzpc->map, offt * 0x1000 + reg, &val);
+	else
+		regmap_read(jzpc->map, offt * 0x100 + reg, &val);
 
 	return val & BIT(idx);
 }
@@ -1857,12 +2040,48 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
 }
 
 static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
-		unsigned int pin, bool enabled)
+		unsigned int pin, unsigned int bias)
 {
-	if (jzpc->version >= ID_JZ4760)
-		ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PEN, !enabled);
+	if (jzpc->version >= ID_X1830) {
+		unsigned int idx = pin % PINS_PER_GPIO_CHIP;
+		unsigned int offt = pin / PINS_PER_GPIO_CHIP;
+
+		if (bias == GPIO_HIZ) {
+			if (idx < (PINS_PER_GPIO_CHIP / 2))
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL0), BIT(idx * 2) * 3);
+			else
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL1), BIT(idx % 16 * 2) * 3);
+		} else if (bias == GPIO_PULLUP) {
+			if (idx < (PINS_PER_GPIO_CHIP / 2)) {
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_SET(X1830_GPIO_PEL0), BIT(idx * 2));
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL0), BIT(idx * 2) * 2);
+			} else {
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_SET(X1830_GPIO_PEL1), BIT(idx % 16 * 2));
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL1), BIT(idx % 16 * 2) * 2);
+			}
+		} else {
+			if (idx < (PINS_PER_GPIO_CHIP / 2)) {
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL0), BIT(idx * 2));
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_SET(X1830_GPIO_PEL0), BIT(idx * 2) * 2);
+			} else {
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_CLEAR(X1830_GPIO_PEL1), BIT(idx % 16 * 2));
+				regmap_write(jzpc->map, offt * 0x1000 +
+						REG_SET(X1830_GPIO_PEL1), BIT(idx % 16 * 2) * 2);
+			}
+		}
+	} else if (jzpc->version >= ID_JZ4760)
+		ingenic_config_pin(jzpc, pin, JZ4760_GPIO_PEN, !bias);
 	else
-		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !enabled);
+		ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !bias);
 }
 
 static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
@@ -1889,7 +2108,7 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 		case PIN_CONFIG_BIAS_DISABLE:
 			dev_dbg(jzpc->dev, "disable pull-over for pin P%c%u\n",
 					'A' + offt, idx);
-			ingenic_set_bias(jzpc, pin, false);
+			ingenic_set_bias(jzpc, pin, GPIO_HIZ);
 			break;
 
 		case PIN_CONFIG_BIAS_PULL_UP:
@@ -1897,7 +2116,7 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 				return -EINVAL;
 			dev_dbg(jzpc->dev, "set pull-up for pin P%c%u\n",
 					'A' + offt, idx);
-			ingenic_set_bias(jzpc, pin, true);
+			ingenic_set_bias(jzpc, pin, GPIO_PULLUP);
 			break;
 
 		case PIN_CONFIG_BIAS_PULL_DOWN:
@@ -1905,7 +2124,7 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 				return -EINVAL;
 			dev_dbg(jzpc->dev, "set pull-down for pin P%c%u\n",
 					'A' + offt, idx);
-			ingenic_set_bias(jzpc, pin, true);
+			ingenic_set_bias(jzpc, pin, GPIO_PULLDOWN);
 			break;
 
 		default:
@@ -1987,6 +2206,7 @@ static const struct of_device_id ingenic_pinctrl_of_match[] = {
 	{ .compatible = "ingenic,x1000-pinctrl", .data = (void *) ID_X1000 },
 	{ .compatible = "ingenic,x1000e-pinctrl", .data = (void *) ID_X1000E },
 	{ .compatible = "ingenic,x1500-pinctrl", .data = (void *) ID_X1500 },
+	{ .compatible = "ingenic,x1830-pinctrl", .data = (void *) ID_X1830 },
 	{},
 };
 
@@ -1996,6 +2216,7 @@ static const struct of_device_id ingenic_gpio_of_match[] __initconst = {
 	{ .compatible = "ingenic,jz4770-gpio", },
 	{ .compatible = "ingenic,jz4780-gpio", },
 	{ .compatible = "ingenic,x1000-gpio", },
+	{ .compatible = "ingenic,x1830-gpio", },
 	{},
 };
 
@@ -2018,7 +2239,10 @@ static int __init ingenic_gpio_probe(struct ingenic_pinctrl *jzpc,
 		return -ENOMEM;
 
 	jzgc->jzpc = jzpc;
-	jzgc->reg_base = bank * 0x100;
+	if (jzpc->version >= ID_X1830)
+		jzgc->reg_base = bank * 0x1000;
+	else
+		jzgc->reg_base = bank * 0x100;
 
 	jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank);
 	if (!jzgc->gc.label)
@@ -2111,7 +2335,9 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
 	else
 		jzpc->version = (enum jz_version)id->driver_data;
 
-	if (jzpc->version >= ID_X1500)
+	if (jzpc->version >= ID_X1830)
+		chip_info = &x1830_chip_info;
+	else if (jzpc->version >= ID_X1500)
 		chip_info = &x1500_chip_info;
 	else if (jzpc->version >= ID_X1000E)
 		chip_info = &x1000e_chip_info;
@@ -2208,6 +2434,7 @@ static const struct platform_device_id ingenic_pinctrl_ids[] = {
 	{ "x1000-pinctrl", ID_X1000 },
 	{ "x1000e-pinctrl", ID_X1000E },
 	{ "x1500-pinctrl", ID_X1500 },
+	{ "x1830-pinctrl", ID_X1830 },
 	{},
 };
 
-- 
2.7.4