linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Zhou Yanjie <zhouyanjie@zoho.com>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	ralf@linux-mips.org, paulburton@kernel.org, jhogan@kernel.org,
	jiaxun.yang@flygoat.com, gregkh@linuxfoundation.org,
	malat@debian.org, tglx@linutronix.de, chenhc@lemote.com
Subject: Re: [PATCH 2/2 v3] MIPS: Ingenic: Disable abandoned HPTLB function.
Date: Wed, 20 Nov 2019 12:45:38 +0100	[thread overview]
Message-ID: <1574250338.3.3@crapouillou.net> (raw)
In-Reply-To: <1574173727-123321-3-git-send-email-zhouyanjie@zoho.com>

Hi Zhou,


Le mar., nov. 19, 2019 at 22:28, Zhou Yanjie <zhouyanjie@zoho.com> a 
écrit :
> JZ4760/JZ4770/JZ4775/X1000/X1500 has an abandoned huge page tlb,
> this mode is not compatible with the MIPS standard, it will cause
> tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S)
> when starting the init process. write 0xa9000000 to cp0 register 5
> sel 4 to disable this function to prevent getting stuck. Confirmed
> by Ingenic, this operation will not adversely affect processors
> without HPTLB function.
> 
> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>

Acked-by: Paul Cercueil <paul@crapouillou.net>

> ---
>  arch/mips/include/asm/mipsregs.h |  6 ++++++
>  arch/mips/kernel/cpu-probe.c     | 21 +++++++++++++++++++--
>  2 files changed, 25 insertions(+), 2 deletions(-)

Still no changelog here :)


> diff --git a/arch/mips/include/asm/mipsregs.h 
> b/arch/mips/include/asm/mipsregs.h
> index bdbdc19..0d5a309 100644
> --- a/arch/mips/include/asm/mipsregs.h
> +++ b/arch/mips/include/asm/mipsregs.h
> @@ -689,6 +689,9 @@
>  #define MIPS_CONF7_IAR		(_ULCAST_(1) << 10)
>  #define MIPS_CONF7_AR		(_ULCAST_(1) << 16)
> 
> +/* Ingenic HPTLB off bits */
> +#define XBURST_PAGECTRL_HPTLB_DIS 0xa9000000
> +
>  /* Ingenic Config7 bits */
>  #define MIPS_CONF7_BTB_LOOP_EN	(_ULCAST_(1) << 4)
> 
> @@ -1971,6 +1974,9 @@ do {									\
>  #define read_c0_brcm_sleepcount()	__read_32bit_c0_register($22, 7)
>  #define write_c0_brcm_sleepcount(val)	__write_32bit_c0_register($22, 
> 7, val)
> 
> +/* Ingenic page ctrl register */
> +#define write_c0_page_ctrl(val)	__write_32bit_c0_register($5, 4, val)
> +
>  /*
>   * Macros to access the guest system control coprocessor
>   */
> diff --git a/arch/mips/kernel/cpu-probe.c 
> b/arch/mips/kernel/cpu-probe.c
> index 7a0e33c..3b5f4fb 100644
> --- a/arch/mips/kernel/cpu-probe.c
> +++ b/arch/mips/kernel/cpu-probe.c
> @@ -1965,13 +1965,30 @@ static inline void cpu_probe_ingenic(struct 
> cpuinfo_mips *c, unsigned int cpu)
>  		break;
>  	}
> 
> +	switch (c->processor_id & PRID_COMP_MASK) {
> +	/*
> +	 * The config0 register in the XBurst CPUs with a processor ID of
> +	 * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this
> +	 * mode is not compatible with the MIPS standard, it will cause
> +	 * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S)
> +	 * when starting the init process. After chip reset, the default
> +	 * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to
> +	 * switch back to VTLB mode to prevent getting stuck.
> +	 */
> +	case PRID_COMP_INGENIC_D1:
> +		write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS);
> +		break;
>  	/*
> -	 * The config0 register in the Xburst CPUs with a processor ID of
> +	 * The config0 register in the XBurst CPUs with a processor ID of
>  	 * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
>  	 * but they don't actually support this ISA.
>  	 */
> -	if ((c->processor_id & PRID_COMP_MASK) == PRID_COMP_INGENIC_D0)
> +	case PRID_COMP_INGENIC_D0:
>  		c->isa_level &= ~MIPS_CPU_ISA_M32R2;
> +		break;
> +	default:
> +		break;
> +	}
>  }
> 
>  static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int 
> cpu)
> --
> 2.7.4
> 
> 



  reply	other threads:[~2019-11-20 11:45 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-24  9:28 Zhou Yanjie
2019-10-24  9:29 ` [PATCH 1/2] MIPS: Rename JZRISC to XBurst Zhou Yanjie
2019-10-24  9:29 ` [PATCH 2/2] MIPS: Ingenic: Disable abandoned HPTLB function Zhou Yanjie
2019-11-15 21:37   ` Paul Burton
2019-11-16 10:11     ` Zhou Yanjie
2019-11-17 11:49       ` Paul Cercueil
2019-11-17 16:36         ` Zhou Yanjie
2019-11-18  4:17         ` Zhou Yanjie
2019-11-15 18:49 ` Paul Cercueil
2019-11-16 17:23 ` MIPS: Ingenic: Disable abandoned HPTLB function v2 Zhou Yanjie
2019-11-16 17:23   ` [PATCH 1/2 v2] MIPS: Rename JZRISC to XBurst Zhou Yanjie
2019-11-16 17:23   ` [PATCH 2/2 v2] MIPS: Ingenic: Disable abandoned HPTLB function Zhou Yanjie
2019-11-19 14:28 ` MIPS: Ingenic: Disable abandoned HPTLB function v3 Zhou Yanjie
2019-11-19 14:28   ` [PATCH 1/2 v3] MIPS: Rename JZRISC to XBurst Zhou Yanjie
2019-11-19 14:28   ` [PATCH 2/2 v3] MIPS: Ingenic: Disable abandoned HPTLB function Zhou Yanjie
2019-11-20 11:45     ` Paul Cercueil [this message]
2019-11-22 22:06     ` Paul Burton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574250338.3.3@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=chenhc@lemote.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jhogan@kernel.org \
    --cc=jiaxun.yang@flygoat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=malat@debian.org \
    --cc=paulburton@kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=tglx@linutronix.de \
    --cc=zhouyanjie@zoho.com \
    --subject='Re: [PATCH 2/2 v3] MIPS: Ingenic: Disable abandoned HPTLB function.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).