linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhou Yanjie <zhouyanjie@zoho.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, robh+dt@kernel.org,
	paul.burton@mips.com, paulburton@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org, mark.rutland@arm.com,
	syq@debian.org, paul@crapouillou.net, sernia.zhou@foxmail.com,
	zhenwenjin@gmail.com
Subject: [PATCH 1/5] clk: Ingenic: Adjust code to make it compatible with X1830.
Date: Wed, 27 Nov 2019 11:32:52 +0800	[thread overview]
Message-ID: <1574825576-91028-2-git-send-email-zhouyanjie@zoho.com> (raw)
In-Reply-To: <1574825576-91028-1-git-send-email-zhouyanjie@zoho.com>

1.Adjust the PLL related code in "cgu.c" and "cgu.h" to make it
  compatible with the X1830 Soc from Ingenic.
2.Adjust the code in "jz4740-cgu.c" to be compatible with the
  new cgu code.
3.Adjust the code in "jz4725b-cgu.c" to be compatible with the
  new cgu code.
4.Adjust the code in "jz4770-cgu.c" to be compatible with the
  new cgu code.
5.Adjust the code in "jz4780-cgu.c" to be compatible with the
  new cgu code.
6.Adjust the code in "x1000-cgu.c" to be compatible with the
  new cgu code.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 drivers/clk/ingenic/cgu.c         | 55 +++++++++++++++++++++++++++++----------
 drivers/clk/ingenic/cgu.h         | 12 ++++++++-
 drivers/clk/ingenic/jz4725b-cgu.c |  3 ++-
 drivers/clk/ingenic/jz4740-cgu.c  |  3 ++-
 drivers/clk/ingenic/jz4770-cgu.c  |  6 +++--
 drivers/clk/ingenic/jz4780-cgu.c  |  3 ++-
 drivers/clk/ingenic/x1000-cgu.c   |  6 +++--
 7 files changed, 66 insertions(+), 22 deletions(-)

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 6e96303..c3c69a8 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -84,7 +84,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	pll_info = &clk_info->pll;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->reg[1]);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	m = (ctl >> pll_info->m_shift) & GENMASK(pll_info->m_bits - 1, 0);
@@ -93,8 +93,17 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
-	bypass = !pll_info->no_bypass_bit &&
-		 !!(ctl & BIT(pll_info->bypass_bit));
+
+	if (pll_info->version >= CGU_X1830) {
+		spin_lock_irqsave(&cgu->lock, flags);
+		ctl = readl(cgu->base + pll_info->reg[0]);
+		spin_unlock_irqrestore(&cgu->lock, flags);
+
+		bypass = !pll_info->no_bypass_bit &&
+			 !!(ctl & BIT(pll_info->bypass_bit));
+	} else
+		bypass = !pll_info->no_bypass_bit &&
+			 !!(ctl & BIT(pll_info->bypass_bit));
 
 	if (bypass)
 		return parent_rate;
@@ -106,7 +115,10 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	BUG_ON(od == pll_info->od_max);
 	od++;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	if (pll_info->version >= CGU_X1830)
+		return div_u64((u64)parent_rate * m * 2, n * od);
+	else
+		return div_u64((u64)parent_rate * m, n * od);
 }
 
 static unsigned long
@@ -139,7 +151,10 @@ ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	if (pod)
 		*pod = od;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	if (pll_info->version >= CGU_X1830)
+		return div_u64((u64)parent_rate * m * 2, n * od);
+	else
+		return div_u64((u64)parent_rate * m, n * od);
 }
 
 static inline const struct ingenic_cgu_clk_info *to_clk_info(
@@ -183,7 +198,7 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 			clk_info->name, req_rate, rate);
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->reg[1]);
 
 	ctl &= ~(GENMASK(pll_info->m_bits - 1, 0) << pll_info->m_shift);
 	ctl |= (m - pll_info->m_offset) << pll_info->m_shift;
@@ -194,7 +209,7 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
 	ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->reg[1]);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	return 0;
@@ -212,16 +227,28 @@ static int ingenic_pll_enable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
 
-	ctl &= ~BIT(pll_info->bypass_bit);
+	if (pll_info->version >= CGU_X1830) {
+		ctl = readl(cgu->base + pll_info->reg[0]);
+
+		ctl &= ~BIT(pll_info->bypass_bit);
+
+		writel(ctl, cgu->base + pll_info->reg[0]);
+
+		ctl = readl(cgu->base + pll_info->reg[1]);
+	} else {
+		ctl = readl(cgu->base + pll_info->reg[1]);
+
+		ctl &= ~BIT(pll_info->bypass_bit);
+	}
+
 	ctl |= BIT(pll_info->enable_bit);
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->reg[1]);
 
 	/* wait for the PLL to stabilise */
 	for (i = 0; i < timeout; i++) {
-		ctl = readl(cgu->base + pll_info->reg);
+		ctl = readl(cgu->base + pll_info->reg[1]);
 		if (ctl & BIT(pll_info->stable_bit))
 			break;
 		mdelay(1);
@@ -245,11 +272,11 @@ static void ingenic_pll_disable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->reg[1]);
 
 	ctl &= ~BIT(pll_info->enable_bit);
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->reg[1]);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 }
 
@@ -263,7 +290,7 @@ static int ingenic_pll_is_enabled(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->reg[1]);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	return !!(ctl & BIT(pll_info->enable_bit));
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 0dc8004..5f87be4 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -42,8 +42,18 @@
  * @stable_bit: the index of the stable bit in the PLL control register
  * @no_bypass_bit: if set, the PLL has no bypass functionality
  */
+enum ingenic_cgu_version {
+	CGU_JZ4740,
+	CGU_JZ4725B,
+	CGU_JZ4770,
+	CGU_JZ4780,
+	CGU_X1000,
+	CGU_X1830,
+};
+
 struct ingenic_cgu_pll_info {
-	unsigned reg;
+	enum ingenic_cgu_version version;
+	unsigned reg[2];
 	const s8 *od_encoding;
 	u8 m_shift, m_bits, m_offset;
 	u8 n_shift, n_bits, n_offset;
diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index a3b4635..6da7b41 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -53,7 +53,8 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 		"pll", CGU_CLK_PLL,
 		.parents = { JZ4725B_CLK_EXT, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_CPPCR,
+			.version = CGU_JZ4725B,
+			.reg = { -1, CGU_REG_CPPCR },
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4f0e92c..3cf800d 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -68,7 +68,8 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		"pll", CGU_CLK_PLL,
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_CPPCR,
+			.version = CGU_JZ4740,
+			.reg = { -1, CGU_REG_CPPCR },
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 956dd65..a62dfb1 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -101,7 +101,8 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		"pll0", CGU_CLK_PLL,
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
-			.reg = CGU_REG_CPPCR0,
+			.version = CGU_JZ4770,
+			.reg = { -1, CGU_REG_CPPCR0 },
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -123,7 +124,8 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		"pll1", CGU_CLK_PLL,
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
-			.reg = CGU_REG_CPPCR1,
+			.version = CGU_JZ4770,
+			.reg = { -1, CGU_REG_CPPCR1 },
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ea905ff..59356d1b 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -220,7 +220,8 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	/* PLLs */
 
 #define DEF_PLL(name) { \
-	.reg = CGU_REG_ ## name, \
+	.version = CGU_JZ4780, \
+	.reg = { -1, CGU_REG_ ## name }, \
 	.m_shift = 19, \
 	.m_bits = 13, \
 	.m_offset = 1, \
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b22d87b..7179b9f 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -57,7 +57,8 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		"apll", CGU_CLK_PLL,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_APLL,
+			.version = CGU_X1000,
+			.reg = { -1, CGU_REG_APLL },
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -78,7 +79,8 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		"mpll", CGU_CLK_PLL,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_MPLL,
+			.version = CGU_X1000,
+			.reg = { -1, CGU_REG_MPLL },
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
-- 
2.7.4



  reply	other threads:[~2019-11-27  3:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27  3:32 clk: Ingenic: Add support for the X1830 and add USB clk for X1000 Zhou Yanjie
2019-11-27  3:32 ` Zhou Yanjie [this message]
2019-11-27 17:37   ` [PATCH 1/5] clk: Ingenic: Adjust code to make it compatible with X1830 Paul Cercueil
2019-11-28  6:29     ` Zhou Yanjie
2019-11-29 11:23       ` Paul Cercueil
2019-12-10 22:55         ` Paul Burton
2019-11-27  3:32 ` [PATCH 2/5] dt-bindings: clock: Add X1830 bindings Zhou Yanjie
2019-12-05 20:38   ` Rob Herring
2019-11-27  3:32 ` [PATCH 3/5] clk: Ingenic: Add CGU driver for X1830 Zhou Yanjie
2019-11-27  3:32 ` [PATCH 4/5] dt-bindings: clock: Add USB OTG clock for X1000 Zhou Yanjie
2019-11-27 17:19   ` Paul Cercueil
2019-11-28  5:44     ` Zhou Yanjie
2019-11-27  3:32 ` [PATCH 5/5] clk: Ingenic: " Zhou Yanjie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574825576-91028-2-git-send-email-zhouyanjie@zoho.com \
    --to=zhouyanjie@zoho.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=paul.burton@mips.com \
    --cc=paul@crapouillou.net \
    --cc=paulburton@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sernia.zhou@foxmail.com \
    --cc=syq@debian.org \
    --cc=zhenwenjin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).