linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Light Hsieh <light.hsieh@mediatek.com>
To: <linus.walleij@linaro.org>
Cc: <linux-mediatek@lists.infradead.org>,
	<linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<sean.wang@kernel.org>, <kuohong.wang@mediatek.com>,
	Light Hsieh <light.hsieh@mediatek.com>
Subject: [PATCH v7 3/6] Refine mtk_pinconf_get() and mtk_pinconf_set()
Date: Tue, 31 Dec 2019 21:41:44 +0800	[thread overview]
Message-ID: <1577799707-11855-3-git-send-email-light.hsieh@mediatek.com> (raw)
In-Reply-To: <1577799707-11855-1-git-send-email-light.hsieh@mediatek.com>

1.Refine mtk_pinconf_get():
  Use only one occurrence of return at end of this function.

2.Refine mtk_pinconf_set():
2.1 Use only one occurrence of return at end of this function.
2.2 Modify case of PIN_CONFIG_INPUT_ENABLE -
2.2.1
    Regard all non-zero setting value as enable, instead of always enable.
2.2.2
    Remove check of ies_present flag and always invoke mtk_hw_set_value()
    since mtk_hw_pin_field_lookup() invoked inside mtk_hw_set_value() has
    the same effect of checking if ies control is supported.
    [The rationale is that: available of a control is always checked
     in mtk_hw_pin_field_lookup() and no need to add ies_present flag
     specially for ies control.]
2.3 Simply code logic for case of PIN_CONFIG_INPUT_SCHMITT.
2.4 Add case for PIN_CONFIG_INPUT_SCHMITT_ENABLE and process it with the
    same code for case of PIN_CONFIG_INPUT_SCHMITT.

Change-Id: I7adef3550ccbb11aee3ddaf014bbd9f54a9ad089
---
 drivers/pinctrl/mediatek/pinctrl-mt6765.c |   1 -
 drivers/pinctrl/mediatek/pinctrl-mt8183.c |   1 -
 drivers/pinctrl/mediatek/pinctrl-paris.c  | 171 ++++++++++++------------------
 3 files changed, 65 insertions(+), 108 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
index 1212264..7fae397 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
@@ -1070,7 +1070,6 @@
 	.ngrps = ARRAY_SIZE(mtk_pins_mt6765),
 	.eint_hw = &mt6765_eint_hw,
 	.gpio_m = 0,
-	.ies_present = true,
 	.base_names = mt6765_pinctrl_register_base_names,
 	.nbase_names = ARRAY_SIZE(mt6765_pinctrl_register_base_names),
 	.bias_disable_set = mtk_pinconf_bias_disable_set,
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
index 9a74d50..4eca818 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
@@ -554,7 +554,6 @@
 	.ngrps = ARRAY_SIZE(mtk_pins_mt8183),
 	.eint_hw = &mt8183_eint_hw,
 	.gpio_m = 0,
-	.ies_present = true,
 	.base_names = mt8183_pinctrl_register_base_names,
 	.nbase_names = ARRAY_SIZE(mt8183_pinctrl_register_base_names),
 	.bias_disable_set = mtk_pinconf_bias_disable_set_rev1,
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 3e13ae7..2f07500 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -81,37 +81,30 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 	int val, val2, err, reg, ret = 1;
 	const struct mtk_pin_desc *desc;
 
-	if (pin >= hw->soc->npins)
-		return -EINVAL;
+	if (pin >= hw->soc->npins) {
+		err = -EINVAL;
+		goto out;
+	}
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		if (hw->soc->bias_disable_get) {
+		if (hw->soc->bias_disable_get)
 			err = hw->soc->bias_disable_get(hw, desc, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		if (hw->soc->bias_get) {
+		if (hw->soc->bias_get)
 			err = hw->soc->bias_get(hw, desc, 1, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		if (hw->soc->bias_get) {
+		if (hw->soc->bias_get)
 			err = hw->soc->bias_get(hw, desc, 0, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_SLEW_RATE:
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &val);
@@ -126,12 +119,16 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 	case PIN_CONFIG_OUTPUT_ENABLE:
 		err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
 		if (err)
-			return err;
-
-		/* HW takes input mode as zero; output mode as non-zero */
-		if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
-		    (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
-			return -EINVAL;
+			goto out;
+		/*     CONFIG     Current direction return value
+		 * -------------  ----------------- ----------------------
+		 * OUTPUT_ENABLE       output       1 (= HW value)
+		 *                     input        0 (= HW value)
+		 * INPUT_ENABLE        output       0 (= reverse HW value)
+		 *                     input        1 (= reverse HW value)
+		 */
+		if (param == PIN_CONFIG_INPUT_ENABLE)
+			val = !val;
 
 		break;
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
@@ -148,13 +145,10 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
-		if (hw->soc->drive_get) {
+		if (hw->soc->drive_get)
 			err = hw->soc->drive_get(hw, desc, &ret);
-			if (err)
-				return err;
-		} else {
+		else
 			err = -ENOTSUPP;
-		}
 		break;
 	case MTK_PIN_CONFIG_TDSEL:
 	case MTK_PIN_CONFIG_RDSEL:
@@ -175,28 +169,24 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 
 			pullup = param == MTK_PIN_CONFIG_PU_ADV;
 			err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		} else
+			err = -ENOTSUPP;
 		break;
 	case MTK_PIN_CONFIG_DRV_ADV:
-		if (hw->soc->adv_drive_get) {
+		if (hw->soc->adv_drive_get)
 			err = hw->soc->adv_drive_get(hw, desc, &ret);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	default:
-		return -ENOTSUPP;
+		err = -ENOTSUPP;
 	}
 
-	*config = pinconf_to_config_packed(param, ret);
+out:
+	if (!err)
+		*config = pinconf_to_config_packed(param, ret);
 
-	return 0;
+	return err;
 }
 
 static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
@@ -216,60 +206,47 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 
 	switch ((u32)param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		if (hw->soc->bias_disable_set) {
+		if (hw->soc->bias_disable_set)
 			err = hw->soc->bias_disable_set(hw, desc);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		if (hw->soc->bias_set) {
+		if (hw->soc->bias_set)
 			err = hw->soc->bias_set(hw, desc, 1);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		if (hw->soc->bias_set) {
+		if (hw->soc->bias_set)
 			err = hw->soc->bias_set(hw, desc, 0);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	case PIN_CONFIG_OUTPUT_ENABLE:
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
 				       MTK_DISABLE);
-		if (err)
+		/* Keep set direction to consider the case that a GPIO pin
+		 *  does not have SMT control
+		 */
+		if (err != -ENOTSUPP)
 			goto err;
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
 				       MTK_OUTPUT);
-		if (err)
-			goto err;
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-		if (hw->soc->ies_present) {
-			mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES,
-					 MTK_ENABLE);
-		}
+		/* regard all non-zero value as enable */
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES, !!arg);
+		if (err)
+			goto err;
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
 				       MTK_INPUT);
-		if (err)
-			goto err;
 		break;
 	case PIN_CONFIG_SLEW_RATE:
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR,
-				       arg);
-		if (err)
-			goto err;
-
+		/* regard all non-zero value as enable */
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR, !!arg);
 		break;
 	case PIN_CONFIG_OUTPUT:
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
@@ -279,41 +256,29 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 
 		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
 				       arg);
-		if (err)
-			goto err;
 		break;
+	case PIN_CONFIG_INPUT_SCHMITT:
 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
 		/* arg = 1: Input mode & SMT enable ;
 		 * arg = 0: Output mode & SMT disable
 		 */
-		arg = arg ? 2 : 1;
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-				       arg & 1);
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !arg);
 		if (err)
 			goto err;
 
-		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
-				       !!(arg & 2));
-		if (err)
-			goto err;
+		err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, !!arg);
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
-		if (hw->soc->drive_set) {
+		if (hw->soc->drive_set)
 			err = hw->soc->drive_set(hw, desc, arg);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	case MTK_PIN_CONFIG_TDSEL:
 	case MTK_PIN_CONFIG_RDSEL:
 		reg = (param == MTK_PIN_CONFIG_TDSEL) ?
 		       PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-
 		err = mtk_hw_set_value(hw, desc, reg, arg);
-		if (err)
-			goto err;
 		break;
 	case MTK_PIN_CONFIG_PU_ADV:
 	case MTK_PIN_CONFIG_PD_ADV:
@@ -323,20 +288,14 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 			pullup = param == MTK_PIN_CONFIG_PU_ADV;
 			err = hw->soc->adv_pull_set(hw, desc, pullup,
 						    arg);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		} else
+			err = -ENOTSUPP;
 		break;
 	case MTK_PIN_CONFIG_DRV_ADV:
-		if (hw->soc->adv_drive_set) {
+		if (hw->soc->adv_drive_set)
 			err = hw->soc->adv_drive_set(hw, desc, arg);
-			if (err)
-				return err;
-		} else {
-			return -ENOTSUPP;
-		}
+		else
+			err = -ENOTSUPP;
 		break;
 	default:
 		err = -ENOTSUPP;
-- 
1.8.1.1.dirty

  parent reply	other threads:[~2019-12-31 13:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-31 13:41 [PATCH v7 1/6] Check gpio pin number and use binary search in mtk_hw_pin_field_lookup() Light Hsieh
2019-12-31 13:41 ` [PATCH v7 2/6] Supporting driving setting without mapping current to register value Light Hsieh
2020-01-04  4:48   ` Dejin Zheng
2020-01-17  8:35   ` Sean Wang
2019-12-31 13:41 ` Light Hsieh [this message]
2019-12-31 13:41 ` [PATCH v7 4/6] Refine mtk_pinconf_get() Light Hsieh
2019-12-31 13:41 ` [PATCH v7 5/6] Backward compatible to previous Mediatek's bias-pull usage Light Hsieh
2020-01-17  9:18   ` Sean Wang
2019-12-31 13:41 ` [PATCH v7 6/6] Add support for pin configuration dump via debugfs Light Hsieh
2020-01-17  9:05   ` Sean Wang
2020-01-02  9:02 ` [PATCH v7 1/6] Check gpio pin number and use binary search in mtk_hw_pin_field_lookup() Yingjoe Chen
2020-01-17  8:30 ` Sean Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1577799707-11855-3-git-send-email-light.hsieh@mediatek.com \
    --to=light.hsieh@mediatek.com \
    --cc=kuohong.wang@mediatek.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=sean.wang@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).