LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Liu Yi L <yi.l.liu@intel.com>
To: alex.williamson@redhat.com, kwankhede@nvidia.com
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	kevin.tian@intel.com, joro@8bytes.org, peterx@redhat.com,
	baolu.lu@linux.intel.com, Liu Yi L <yi.l.liu@intel.com>
Subject: [PATCH v4 06/12] vfio_pci: shrink vfio_pci_common.c
Date: Tue,  7 Jan 2020 20:01:43 +0800
Message-ID: <1578398509-26453-7-git-send-email-yi.l.liu@intel.com> (raw)
In-Reply-To: <1578398509-26453-1-git-send-email-yi.l.liu@intel.com>

This patch removes the vfio-pci module specific codes in vfio_pci_common.c
to make vfio_pci_common.c be a common source file.

Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
---
 drivers/vfio/pci/vfio_pci_common.c | 235 -------------------------------------
 1 file changed, 235 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci_common.c b/drivers/vfio/pci/vfio_pci_common.c
index 103e493..b0894dfc 100644
--- a/drivers/vfio/pci/vfio_pci_common.c
+++ b/drivers/vfio/pci/vfio_pci_common.c
@@ -30,30 +30,6 @@
 
 #include "vfio_pci_private.h"
 
-#define DRIVER_VERSION  "0.2"
-#define DRIVER_AUTHOR   "Alex Williamson <alex.williamson@redhat.com>"
-#define DRIVER_DESC     "VFIO PCI - User Level meta-driver"
-
-static char ids[1024] __initdata;
-module_param_string(ids, ids, sizeof(ids), 0);
-MODULE_PARM_DESC(ids, "Initial PCI IDs to add to the vfio driver, format is \"vendor:device[:subvendor[:subdevice[:class[:class_mask]]]]\" and multiple comma separated entries can be specified");
-
-static bool nointxmask;
-module_param_named(nointxmask, nointxmask, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(nointxmask,
-		  "Disable support for PCI 2.3 style INTx masking.  If this resolves problems for specific devices, report lspci -vvvxxx to linux-pci@vger.kernel.org so the device can be fixed automatically via the broken_intx_masking flag.");
-
-#ifdef CONFIG_VFIO_PCI_VGA
-static bool disable_vga;
-module_param(disable_vga, bool, S_IRUGO);
-MODULE_PARM_DESC(disable_vga, "Disable VGA resource access through vfio-pci");
-#endif
-
-static bool disable_idle_d3;
-module_param(disable_idle_d3, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(disable_idle_d3,
-		 "Disable using the PCI D3 low power state for idle, unused devices");
-
 /*
  * Our VGA arbiter participation is limited since we don't know anything
  * about the device itself.  However, if the device is the only VGA device
@@ -459,49 +435,6 @@ void vfio_pci_refresh_config(struct vfio_pci_device *vdev,
 	vdev->disable_idle_d3 = disable_idle_d3;
 }
 
-static void vfio_pci_release(void *device_data)
-{
-	struct vfio_pci_device *vdev = device_data;
-
-	mutex_lock(&vdev->reflck->lock);
-
-	if (!(--vdev->refcnt)) {
-		vfio_spapr_pci_eeh_release(vdev->pdev);
-		vfio_pci_disable(vdev);
-	}
-
-	mutex_unlock(&vdev->reflck->lock);
-
-	module_put(THIS_MODULE);
-}
-
-static int vfio_pci_open(void *device_data)
-{
-	struct vfio_pci_device *vdev = device_data;
-	int ret = 0;
-
-	if (!try_module_get(THIS_MODULE))
-		return -ENODEV;
-
-	vfio_pci_refresh_config(vdev, nointxmask, disable_idle_d3);
-
-	mutex_lock(&vdev->reflck->lock);
-
-	if (!vdev->refcnt) {
-		ret = vfio_pci_enable(vdev);
-		if (ret)
-			goto error;
-
-		vfio_spapr_pci_eeh_open(vdev->pdev);
-	}
-	vdev->refcnt++;
-error:
-	mutex_unlock(&vdev->reflck->lock);
-	if (ret)
-		module_put(THIS_MODULE);
-	return ret;
-}
-
 static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
 {
 	if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
@@ -1273,129 +1206,6 @@ void vfio_pci_request(void *device_data, unsigned int count)
 	mutex_unlock(&vdev->igate);
 }
 
-static const struct vfio_device_ops vfio_pci_ops = {
-	.name		= "vfio-pci",
-	.open		= vfio_pci_open,
-	.release	= vfio_pci_release,
-	.ioctl		= vfio_pci_ioctl,
-	.read		= vfio_pci_read,
-	.write		= vfio_pci_write,
-	.mmap		= vfio_pci_mmap,
-	.request	= vfio_pci_request,
-};
-
-static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	struct vfio_pci_device *vdev;
-	struct iommu_group *group;
-	int ret;
-
-	if (pdev->hdr_type != PCI_HEADER_TYPE_NORMAL)
-		return -EINVAL;
-
-	/*
-	 * Prevent binding to PFs with VFs enabled, this too easily allows
-	 * userspace instance with VFs and PFs from the same device, which
-	 * cannot work.  Disabling SR-IOV here would initiate removing the
-	 * VFs, which would unbind the driver, which is prone to blocking
-	 * if that VF is also in use by vfio-pci.  Just reject these PFs
-	 * and let the user sort it out.
-	 */
-	if (pci_num_vf(pdev)) {
-		pci_warn(pdev, "Cannot bind to PF with SR-IOV enabled\n");
-		return -EBUSY;
-	}
-
-	group = vfio_iommu_group_get(&pdev->dev);
-	if (!group)
-		return -EINVAL;
-
-	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
-	if (!vdev) {
-		vfio_iommu_group_put(group, &pdev->dev);
-		return -ENOMEM;
-	}
-
-	vdev->pdev = pdev;
-	vdev->irq_type = VFIO_PCI_NUM_IRQS;
-	mutex_init(&vdev->igate);
-	spin_lock_init(&vdev->irqlock);
-	mutex_init(&vdev->ioeventfds_lock);
-	INIT_LIST_HEAD(&vdev->ioeventfds_list);
-	vdev->nointxmask = nointxmask;
-#ifdef CONFIG_VFIO_PCI_VGA
-	vdev->disable_vga = disable_vga;
-#endif
-	vdev->disable_idle_d3 = disable_idle_d3;
-
-	ret = vfio_add_group_dev(&pdev->dev, &vfio_pci_ops, vdev);
-	if (ret) {
-		vfio_iommu_group_put(group, &pdev->dev);
-		kfree(vdev);
-		return ret;
-	}
-
-	ret = vfio_pci_reflck_attach(vdev);
-	if (ret) {
-		vfio_del_group_dev(&pdev->dev);
-		vfio_iommu_group_put(group, &pdev->dev);
-		kfree(vdev);
-		return ret;
-	}
-
-	if (vfio_pci_is_vga(pdev)) {
-		vga_client_register(pdev, vdev, NULL, vfio_pci_set_vga_decode);
-		vga_set_legacy_decoding(pdev,
-					vfio_pci_set_vga_decode(vdev, false));
-	}
-
-	vfio_pci_probe_power_state(vdev);
-
-	if (!vdev->disable_idle_d3) {
-		/*
-		 * pci-core sets the device power state to an unknown value at
-		 * bootup and after being removed from a driver.  The only
-		 * transition it allows from this unknown state is to D0, which
-		 * typically happens when a driver calls pci_enable_device().
-		 * We're not ready to enable the device yet, but we do want to
-		 * be able to get to D3.  Therefore first do a D0 transition
-		 * before going to D3.
-		 */
-		vfio_pci_set_power_state(vdev, PCI_D0);
-		vfio_pci_set_power_state(vdev, PCI_D3hot);
-	}
-
-	return ret;
-}
-
-static void vfio_pci_remove(struct pci_dev *pdev)
-{
-	struct vfio_pci_device *vdev;
-
-	vdev = vfio_del_group_dev(&pdev->dev);
-	if (!vdev)
-		return;
-
-	vfio_pci_reflck_put(vdev->reflck);
-
-	vfio_iommu_group_put(pdev->dev.iommu_group, &pdev->dev);
-	kfree(vdev->region);
-	mutex_destroy(&vdev->ioeventfds_lock);
-
-	if (!vdev->disable_idle_d3)
-		vfio_pci_set_power_state(vdev, PCI_D0);
-
-	kfree(vdev->pm_save);
-	kfree(vdev);
-
-	if (vfio_pci_is_vga(pdev)) {
-		vga_client_register(pdev, NULL, NULL, NULL);
-		vga_set_legacy_decoding(pdev,
-				VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM |
-				VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM);
-	}
-}
-
 static pci_ers_result_t vfio_pci_aer_err_detected(struct pci_dev *pdev,
 						  pci_channel_state_t state)
 {
@@ -1428,14 +1238,6 @@ static const struct pci_error_handlers vfio_err_handlers = {
 	.error_detected = vfio_pci_aer_err_detected,
 };
 
-static struct pci_driver vfio_pci_driver = {
-	.name		= "vfio-pci",
-	.id_table	= NULL, /* only dynamic ids */
-	.probe		= vfio_pci_probe,
-	.remove		= vfio_pci_remove,
-	.err_handler	= &vfio_err_handlers,
-};
-
 static DEFINE_MUTEX(reflck_lock);
 
 static struct vfio_pci_reflck *vfio_pci_reflck_alloc(void)
@@ -1629,12 +1431,6 @@ static void vfio_pci_try_bus_reset(struct vfio_pci_device *vdev)
 	kfree(devs.devices);
 }
 
-static void __exit vfio_pci_cleanup(void)
-{
-	pci_unregister_driver(&vfio_pci_driver);
-	vfio_pci_uninit_perm_bits();
-}
-
 void __init vfio_pci_fill_ids(char *ids, struct pci_driver *driver)
 {
 	char *p, *id;
@@ -1675,34 +1471,3 @@ void __init vfio_pci_fill_ids(char *ids, struct pci_driver *driver)
 				class, class_mask);
 	}
 }
-
-static int __init vfio_pci_init(void)
-{
-	int ret;
-
-	/* Allocate shared config space permision data used by all devices */
-	ret = vfio_pci_init_perm_bits();
-	if (ret)
-		return ret;
-
-	/* Register and scan for devices */
-	ret = pci_register_driver(&vfio_pci_driver);
-	if (ret)
-		goto out_driver;
-
-	vfio_pci_fill_ids(ids, &vfio_pci_driver);
-
-	return 0;
-
-out_driver:
-	vfio_pci_uninit_perm_bits();
-	return ret;
-}
-
-module_init(vfio_pci_init);
-module_exit(vfio_pci_cleanup);
-
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-- 
2.7.4


  parent reply index

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07 12:01 [PATCH v4 00/12] vfio_pci: wrap pci device as a mediated device Liu Yi L
2020-01-07 12:01 ` [PATCH v4 01/12] vfio_pci: refine user config reference in vfio-pci module Liu Yi L
2020-01-09 22:48   ` Alex Williamson
2020-01-16 12:19     ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 02/12] vfio_pci: move vfio_pci_is_vga/vfio_vga_disabled to header file Liu Yi L
2020-01-15 10:43   ` Cornelia Huck
2020-01-16 12:46     ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 03/12] vfio_pci: refine vfio_pci_driver reference in vfio_pci.c Liu Yi L
2020-01-09 22:48   ` Alex Williamson
2020-01-10  7:35     ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 04/12] vfio_pci: make common functions be extern Liu Yi L
2020-01-15 10:56   ` Cornelia Huck
2020-01-16 12:48     ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 05/12] vfio_pci: duplicate vfio_pci.c Liu Yi L
2020-01-15 11:03   ` Cornelia Huck
2020-01-15 15:12     ` Alex Williamson
2020-01-07 12:01 ` Liu Yi L [this message]
2020-01-07 12:01 ` [PATCH v4 07/12] vfio_pci: shrink vfio_pci.c Liu Yi L
2020-01-08 11:24   ` kbuild test robot
2020-01-09 22:48   ` Alex Williamson
2020-01-16 12:42     ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 08/12] vfio_pci: duplicate vfio_pci_private.h to include/linux Liu Yi L
2020-01-07 12:01 ` [PATCH v4 09/12] vfio: split vfio_pci_private.h into two files Liu Yi L
2020-01-09 22:48   ` Alex Williamson
2020-01-16 11:59     ` Liu, Yi L
2020-01-07 12:01 ` [PATCH v4 10/12] vfio: build vfio_pci_common.c into a kernel module Liu Yi L
2020-01-07 12:01 ` [PATCH v4 11/12] samples: add vfio-mdev-pci driver Liu Yi L
2020-01-09 22:48   ` Alex Williamson
2020-01-16 12:33     ` Liu, Yi L
2020-01-16 21:24       ` Alex Williamson
2020-01-18 14:25         ` Liu, Yi L
2020-01-20 21:07           ` Alex Williamson
2020-01-21  7:43             ` Tian, Kevin
2020-01-21  8:43               ` Yan Zhao
2020-01-21 20:04                 ` Alex Williamson
2020-01-21 21:54                   ` Yan Zhao
2020-01-23 23:33                     ` Alex Williamson
2020-01-31  2:26                       ` Yan Zhao
2020-01-15 12:30   ` Cornelia Huck
2020-01-16 13:23     ` Liu, Yi L
2020-01-16 17:40       ` Cornelia Huck
2020-01-18 14:23         ` Liu, Yi L
2020-01-20  8:55           ` Cornelia Huck
2020-01-07 12:01 ` [PATCH v4 12/12] samples: refine " Liu Yi L

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1578398509-26453-7-git-send-email-yi.l.liu@intel.com \
    --to=yi.l.liu@intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=kwankhede@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterx@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git