[tip: x86/fpu] x86/fpu: Deactivate FPU state after failure during state load

["tip-bot2 for Sebastian Andrzej Siewior" <tip-bot2@linutronix.de>]

The following commit has been merged into the x86/fpu branch of tip:

Commit-ID:     bbc55341b9c67645d1a5471506370caf7dd4a203
Gitweb:        https://git.kernel.org/tip/bbc55341b9c67645d1a5471506370caf7dd4a203
Author:        Sebastian Andrzej Siewior <bigeasy@linutronix.de>
AuthorDate:    Fri, 20 Dec 2019 20:59:06 +01:00
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Tue, 07 Jan 2020 13:44:42 +01:00

x86/fpu: Deactivate FPU state after failure during state load

In __fpu__restore_sig(), fpu_fpregs_owner_ctx needs to be reset if the
FPU state was not fully restored. Otherwise the following may happen (on
the same CPU):

  Task A                     Task B               fpu_fpregs_owner_ctx
  *active*                                        A.fpu
  __fpu__restore_sig()
                             ctx switch           load B.fpu
                             *active*             B.fpu
  fpregs_lock()
  copy_user_to_fpregs_zeroing()
    copy_kernel_to_xregs() *modify*
    copy_user_to_xregs() *fails*
  fpregs_unlock()
                            ctx switch            skip loading B.fpu,
                            *active*              B.fpu

In the success case, fpu_fpregs_owner_ctx is set to the current task.

In the failure case, the FPU state might have been modified by loading
the init state.

In this case, fpu_fpregs_owner_ctx needs to be reset in order to ensure
that the FPU state of the following task is loaded from saved state (and
not skipped because it was the previous state).

Reset fpu_fpregs_owner_ctx after a failure during restore occurred, to
ensure that the FPU state for the next task is always loaded.

The problem was debugged-by Yu-cheng Yu <yu-cheng.yu@intel.com>.

 [ bp: Massage commit message. ]

Fixes: 5f409e20b7945 ("x86/fpu: Defer FPU state load until return to userspace")
Reported-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191220195906.plk6kpmsrikvbcfn@linutronix.de
---
 arch/x86/kernel/fpu/signal.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 0071b79..400a05e 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -352,6 +352,7 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 			fpregs_unlock();
 			return 0;
 		}
+		fpregs_deactivate(fpu);
 		fpregs_unlock();
 	}
 
@@ -403,6 +404,8 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 	}
 	if (!ret)
 		fpregs_mark_activate();
+	else
+		fpregs_deactivate(fpu);
 	fpregs_unlock();
 
 err_out: