linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: vincent.cheng.xh@renesas.com
To: richardcochran@gmail.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Vincent Cheng <vincent.cheng.xh@renesas.com>
Subject: [PATCH v4 net-next 1/1] ptp: clockmatrix: Rework clockmatrix version information.
Date: Tue,  7 Jan 2020 09:47:57 -0500	[thread overview]
Message-ID: <1578408477-4650-2-git-send-email-vincent.cheng.xh@renesas.com> (raw)
In-Reply-To: <1578408477-4650-1-git-send-email-vincent.cheng.xh@renesas.com>

From: Vincent Cheng <vincent.cheng.xh@renesas.com>

Simplify and fix the version information displayed by the driver.
The new info better relects what is needed to support the hardware.

Prev:
Version: 4.8.0, Pipeline 22169 0x4001, Rev 0, Bond 5, CSR 311, IRQ 2

New:
Version: 4.8.0, Id: 0x4001  Hw Rev: 5  OTP Config Select: 15

- Remove pipeline, CSR and IRQ because version x.y.z already incorporates
  this information.
- Remove bond number because it is not used.
- Remove rev number because register was not implemented, always 0
- Add HW Rev ID register to replace rev number
- Add OTP config select to show the user configuration chosen by
  the configurable GPIO pins on start-up

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
---
 drivers/ptp/idt8a340_reg.h    |  2 ++
 drivers/ptp/ptp_clockmatrix.c | 77 ++++++++-----------------------------------
 2 files changed, 15 insertions(+), 64 deletions(-)

diff --git a/drivers/ptp/idt8a340_reg.h b/drivers/ptp/idt8a340_reg.h
index 9263bc3..69eedda 100644
--- a/drivers/ptp/idt8a340_reg.h
+++ b/drivers/ptp/idt8a340_reg.h
@@ -77,6 +77,8 @@
 #define JTAG_DEVICE_ID                    0x001c
 #define PRODUCT_ID                        0x001e
 
+#define OTP_SCSR_CONFIG_SELECT            0x0022
+
 #define STATUS                            0xc03c
 #define USER_GPIO0_TO_7_STATUS            0x008a
 #define USER_GPIO8_TO_15_STATUS           0x008b
diff --git a/drivers/ptp/ptp_clockmatrix.c b/drivers/ptp/ptp_clockmatrix.c
index e858367..032e112 100644
--- a/drivers/ptp/ptp_clockmatrix.c
+++ b/drivers/ptp/ptp_clockmatrix.c
@@ -405,6 +405,7 @@ static int _idtcm_set_dpll_tod(struct idtcm_channel *channel,
 	if (wr_trig == HW_TOD_WR_TRIG_SEL_MSB) {
 
 		if (idtcm->calculate_overhead_flag) {
+			/* Assumption: I2C @ 400KHz */
 			total_overhead_ns =  ktime_to_ns(ktime_get_raw()
 							 - idtcm->start_time)
 					     + idtcm->tod_write_overhead_ns
@@ -596,44 +597,7 @@ static int idtcm_state_machine_reset(struct idtcm *idtcm)
 
 static int idtcm_read_hw_rev_id(struct idtcm *idtcm, u8 *hw_rev_id)
 {
-	return idtcm_read(idtcm,
-			  GENERAL_STATUS,
-			  HW_REV_ID,
-			  hw_rev_id,
-			  sizeof(u8));
-}
-
-static int idtcm_read_bond_id(struct idtcm *idtcm, u8 *bond_id)
-{
-	return idtcm_read(idtcm,
-			  GENERAL_STATUS,
-			  BOND_ID,
-			  bond_id,
-			  sizeof(u8));
-}
-
-static int idtcm_read_hw_csr_id(struct idtcm *idtcm, u16 *hw_csr_id)
-{
-	int err;
-	u8 buf[2] = {0};
-
-	err = idtcm_read(idtcm, GENERAL_STATUS, HW_CSR_ID, buf, sizeof(buf));
-
-	*hw_csr_id = (buf[1] << 8) | buf[0];
-
-	return err;
-}
-
-static int idtcm_read_hw_irq_id(struct idtcm *idtcm, u16 *hw_irq_id)
-{
-	int err;
-	u8 buf[2] = {0};
-
-	err = idtcm_read(idtcm, GENERAL_STATUS, HW_IRQ_ID, buf, sizeof(buf));
-
-	*hw_irq_id = (buf[1] << 8) | buf[0];
-
-	return err;
+	return idtcm_read(idtcm, HW_REVISION, REV_ID, hw_rev_id, sizeof(u8));
 }
 
 static int idtcm_read_product_id(struct idtcm *idtcm, u16 *product_id)
@@ -674,20 +638,11 @@ static int idtcm_read_hotfix_release(struct idtcm *idtcm, u8 *hotfix)
 			  sizeof(u8));
 }
 
-static int idtcm_read_pipeline(struct idtcm *idtcm, u32 *pipeline)
+static int idtcm_read_otp_scsr_config_select(struct idtcm *idtcm,
+					     u8 *config_select)
 {
-	int err;
-	u8 buf[4] = {0};
-
-	err = idtcm_read(idtcm,
-			 GENERAL_STATUS,
-			 PIPELINE_ID,
-			 &buf[0],
-			 sizeof(buf));
-
-	*pipeline = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
-
-	return err;
+	return idtcm_read(idtcm, GENERAL_STATUS, OTP_SCSR_CONFIG_SELECT,
+			  config_select, sizeof(u8));
 }
 
 static int process_pll_mask(struct idtcm *idtcm, u32 addr, u8 val, u8 *mask)
@@ -1078,28 +1033,22 @@ static void idtcm_display_version_info(struct idtcm *idtcm)
 	u8 major;
 	u8 minor;
 	u8 hotfix;
-	u32 pipeline;
 	u16 product_id;
-	u16 csr_id;
-	u16 irq_id;
 	u8 hw_rev_id;
-	u8 bond_id;
+	u8 config_select;
+	char *fmt = "%d.%d.%d, Id: 0x%04x  HW Rev: %d  OTP Config Select: %d\n";
 
 	idtcm_read_major_release(idtcm, &major);
 	idtcm_read_minor_release(idtcm, &minor);
 	idtcm_read_hotfix_release(idtcm, &hotfix);
-	idtcm_read_pipeline(idtcm, &pipeline);
 
 	idtcm_read_product_id(idtcm, &product_id);
 	idtcm_read_hw_rev_id(idtcm, &hw_rev_id);
-	idtcm_read_bond_id(idtcm, &bond_id);
-	idtcm_read_hw_csr_id(idtcm, &csr_id);
-	idtcm_read_hw_irq_id(idtcm, &irq_id);
-
-	dev_info(&idtcm->client->dev, "Version:  %d.%d.%d, Pipeline %u\t"
-		 "0x%04x, Rev %d, Bond %d, CSR %d, IRQ %d\n",
-		 major, minor, hotfix, pipeline,
-		 product_id, hw_rev_id, bond_id, csr_id, irq_id);
+
+	idtcm_read_otp_scsr_config_select(idtcm, &config_select);
+
+	dev_info(&idtcm->client->dev, fmt, major, minor, hotfix,
+		 product_id, hw_rev_id, config_select);
 }
 
 static const struct ptp_clock_info idtcm_caps = {
-- 
2.7.4


  reply	other threads:[~2020-01-07 14:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07 14:47 [PATCH v4 net-next 0/1] Replace IDT with Renesas and improve version info vincent.cheng.xh
2020-01-07 14:47 ` vincent.cheng.xh [this message]
2020-01-07 21:51   ` [PATCH v4 net-next 1/1] ptp: clockmatrix: Rework clockmatrix version information David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1578408477-4650-2-git-send-email-vincent.cheng.xh@renesas.com \
    --to=vincent.cheng.xh@renesas.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).