linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Can Guo <cang@codeaurora.org>
To: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
	hongwus@codeaurora.org, rnayak@codeaurora.org,
	linux-scsi@vger.kernel.org, kernel-team@android.com,
	saravanak@google.com, salyzyn@google.com, cang@codeaurora.org
Cc: Andy Gross <agross@kernel.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	Pedro Sousa <pedrom.sousa@synopsys.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	linux-arm-msm@vger.kernel.org (open list:ARM/QUALCOMM SUPPORT),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 4/8] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
Date: Wed, 22 Jan 2020 22:12:21 -0800	[thread overview]
Message-ID: <1579759946-5448-5-git-send-email-cang@codeaurora.org> (raw)
In-Reply-To: <1579759946-5448-1-git-send-email-cang@codeaurora.org>

The bus bandwidth voting is required to be done before the bus clocks
are enabled, and the unvoting is required to be done only after the bus
clocks are disabled.

Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufs-qcom.c | 57 +++++++++++++++++++++++++++++++--------------
 1 file changed, 39 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index c69c29a1c..85d7c17 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -38,7 +38,6 @@ enum {
 
 static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
 static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
 						       u32 clk_cycles);
@@ -674,7 +673,7 @@ static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
 	}
 }
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+static int __ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
 {
 	int err = 0;
 
@@ -705,7 +704,7 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 
 	vote = ufs_qcom_get_bus_vote(host, mode);
 	if (vote >= 0)
-		err = ufs_qcom_set_bus_vote(host, vote);
+		err = __ufs_qcom_set_bus_vote(host, vote);
 	else
 		err = vote;
 
@@ -716,6 +715,35 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 	return err;
 }
 
+static int ufs_qcom_set_bus_vote(struct ufs_hba *hba, bool on)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	int vote, err;
+
+	/*
+	 * In case ufs_qcom_init() is not yet done, simply ignore.
+	 * This ufs_qcom_set_bus_vote() shall be called from
+	 * ufs_qcom_init() after init is done.
+	 */
+	if (!host)
+		return 0;
+
+	if (on) {
+		vote = host->bus_vote.saved_vote;
+		if (vote == host->bus_vote.min_bw_vote)
+			ufs_qcom_update_bus_bw_vote(host);
+	} else {
+		vote = host->bus_vote.min_bw_vote;
+	}
+
+	err = __ufs_qcom_set_bus_vote(host, vote);
+	if (err)
+		dev_err(hba->dev, "%s: set bus vote failed %d\n",
+				 __func__, err);
+
+	return err;
+}
+
 static ssize_t
 show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
 			char *buf)
@@ -792,7 +820,7 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
 	return 0;
 }
 
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+static int ufs_qcom_set_bus_vote(struct ufs_hba *host, bool on)
 {
 	return 0;
 }
@@ -1030,8 +1058,7 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 				 enum ufs_notify_change_status status)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	int err;
-	int vote = 0;
+	int err = 0;
 
 	/*
 	 * In case ufs_qcom_init() is not yet done, simply ignore.
@@ -1041,28 +1068,21 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 	if (!host)
 		return 0;
 
-	if (on && (status == POST_CHANGE)) {
+	if (on && (status == PRE_CHANGE)) {
+		err = ufs_qcom_set_bus_vote(hba, true);
+	} else if (on && (status == POST_CHANGE)) {
 		/* enable the device ref clock for HS mode*/
 		if (ufshcd_is_hs_mode(&hba->pwr_info))
 			ufs_qcom_dev_ref_clk_ctrl(host, true);
-		vote = host->bus_vote.saved_vote;
-		if (vote == host->bus_vote.min_bw_vote)
-			ufs_qcom_update_bus_bw_vote(host);
-
 	} else if (!on && (status == PRE_CHANGE)) {
 		if (!ufs_qcom_is_link_active(hba)) {
 			/* disable device ref_clk */
 			ufs_qcom_dev_ref_clk_ctrl(host, false);
 		}
-
-		vote = host->bus_vote.min_bw_vote;
+	} else if (!on && (status == POST_CHANGE)) {
+		err = ufs_qcom_set_bus_vote(hba, false);
 	}
 
-	err = ufs_qcom_set_bus_vote(host, vote);
-	if (err)
-		dev_err(hba->dev, "%s: set bus vote failed %d\n",
-				__func__, err);
-
 	return err;
 }
 
@@ -1238,6 +1258,7 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_set_caps(hba);
 	ufs_qcom_advertise_quirks(hba);
 
+	ufs_qcom_set_bus_vote(hba, true);
 	ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
 
 	if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2020-01-23  6:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1579759946-5448-1-git-send-email-cang@codeaurora.org>
2020-01-23  6:12 ` [PATCH v3 1/8] scsi: ufs: Flush exception event before suspend Can Guo
2020-01-23 22:54   ` [EXT] " Bean Huo (beanhuo)
2020-01-23  6:12 ` [PATCH v3 2/8] scsi: ufs: set load before setting voltage in regulators Can Guo
2020-01-23  6:12 ` [PATCH v3 3/8] scsi: ufs: Remove the check before call setup clock notify vops Can Guo
2020-01-23  6:12 ` Can Guo [this message]
2020-01-23  6:12 ` [PATCH v3 5/8] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic Can Guo
2020-01-23  6:50   ` hongwus
2020-01-23  6:12 ` [PATCH v3 6/8] scsi: ufs: Add dev ref clock gating wait time support Can Guo
2020-01-23  6:12 ` [PATCH v3 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk Can Guo
2020-01-23  6:12 ` [PATCH v3 8/8] scsi: ufs: Select INITIAL adapt for HS Gear4 Can Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1579759946-5448-5-git-send-email-cang@codeaurora.org \
    --to=cang@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=hongwus@codeaurora.org \
    --cc=jejb@linux.ibm.com \
    --cc=kernel-team@android.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=nguyenb@codeaurora.org \
    --cc=pedrom.sousa@synopsys.com \
    --cc=rnayak@codeaurora.org \
    --cc=salyzyn@google.com \
    --cc=saravanak@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).