linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFC PATCH v1 0/5] Add Tegra driver for video capture
@ 2020-01-28 18:23 Sowjanya Komatineni
  2020-01-28 18:23 ` [RFC PATCH v1 1/5] dt-bindings: clock: tegra: Add clk id for CSI TPG clock Sowjanya Komatineni
                   ` (6 more replies)
  0 siblings, 7 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-28 18:23 UTC (permalink / raw)
  To: skomatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

This series adds Tegra210 VI and CSI driver for built-in test pattern
generator (TPG) capture.

Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
CSI port is one-to-one mapped to VI channel for video capture.

This series has TPG support only where it creates hard media links
between CSI subdevice and VI video device without device graphs.

v4l2-compliance results are available below the patch diff.

[v0]:	Includes,
	- Adds CSI TPG clock to Tegra210 clock driver
	- Host1x video driver with VI and CSI clients.
	- Support for Tegra210 only.
	- VI CSI TPG support with hard media links in driver.
	- Video formats supported by Tegra210 VI
	- CSI TPG supported video formats


Sowjanya Komatineni (5):
  dt-bindings: clock: tegra: Add clk id for CSI TPG clock
  clk: tegra: Add Tegra210 CSI TPG clock gate
  dt-binding: tegra: Add VI and CSI bindings
  media: tegra: Add Tegra Video input driver for Tegra210
  arm64: tegra: Add Tegra VI CSI suppport in device tree

 .../display/tegra/nvidia,tegra20-host1x.txt        |  10 +-
 arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi     |   8 +
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  31 +-
 drivers/clk/tegra/clk-tegra210.c                   |   7 +
 drivers/staging/media/Kconfig                      |   2 +
 drivers/staging/media/Makefile                     |   1 +
 drivers/staging/media/tegra/Kconfig                |  12 +
 drivers/staging/media/tegra/Makefile               |  11 +
 drivers/staging/media/tegra/TODO                   |  10 +
 drivers/staging/media/tegra/csi.h                  | 111 ++++
 drivers/staging/media/tegra/csi2_fops.c            | 335 +++++++++++
 drivers/staging/media/tegra/csi2_fops.h            |  15 +
 drivers/staging/media/tegra/host1x-video.c         | 120 ++++
 drivers/staging/media/tegra/host1x-video.h         |  33 ++
 drivers/staging/media/tegra/mc_common.h            | 131 +++++
 drivers/staging/media/tegra/tegra-channel.c        | 628 +++++++++++++++++++++
 drivers/staging/media/tegra/tegra-core.c           | 111 ++++
 drivers/staging/media/tegra/tegra-core.h           | 125 ++++
 drivers/staging/media/tegra/tegra-csi.c            | 380 +++++++++++++
 drivers/staging/media/tegra/tegra-vi.c             | 351 ++++++++++++
 drivers/staging/media/tegra/tegra-vi.h             | 101 ++++
 drivers/staging/media/tegra/vi2_fops.c             | 364 ++++++++++++
 drivers/staging/media/tegra/vi2_fops.h             |  15 +
 drivers/staging/media/tegra/vi2_formats.h          | 119 ++++
 drivers/staging/media/tegra/vi2_registers.h        | 194 +++++++
 include/dt-bindings/clock/tegra210-car.h           |   2 +-
 26 files changed, 3224 insertions(+), 3 deletions(-)
 create mode 100644 drivers/staging/media/tegra/Kconfig
 create mode 100644 drivers/staging/media/tegra/Makefile
 create mode 100644 drivers/staging/media/tegra/TODO
 create mode 100644 drivers/staging/media/tegra/csi.h
 create mode 100644 drivers/staging/media/tegra/csi2_fops.c
 create mode 100644 drivers/staging/media/tegra/csi2_fops.h
 create mode 100644 drivers/staging/media/tegra/host1x-video.c
 create mode 100644 drivers/staging/media/tegra/host1x-video.h
 create mode 100644 drivers/staging/media/tegra/mc_common.h
 create mode 100644 drivers/staging/media/tegra/tegra-channel.c
 create mode 100644 drivers/staging/media/tegra/tegra-core.c
 create mode 100644 drivers/staging/media/tegra/tegra-core.h
 create mode 100644 drivers/staging/media/tegra/tegra-csi.c
 create mode 100644 drivers/staging/media/tegra/tegra-vi.c
 create mode 100644 drivers/staging/media/tegra/tegra-vi.h
 create mode 100644 drivers/staging/media/tegra/vi2_fops.c
 create mode 100644 drivers/staging/media/tegra/vi2_fops.h
 create mode 100644 drivers/staging/media/tegra/vi2_formats.h
 create mode 100644 drivers/staging/media/tegra/vi2_registers.h


v4l2-compliance SHA: e7402fb758fd106955c3b7d5a5e961d1cb606f4a, 32 bits, 32-bit time_t

Compliance test for tegra-video device /dev/video0:

Driver Info:
        Driver name      : tegra-video
        Card type        : 54080000.vi-output-0
        Bus info         : platform:54080000.vi:0
        Driver version   : 5.5.0
        Capabilities     : 0x85200001
                Video Capture
                Read/Write
                Streaming
                Extended Pix Format
                Device Capabilities
        Device Caps      : 0x05200001
                Video Capture
                Read/Write
                Streaming
                Extended Pix Format
Media Driver Info:
        Driver name      : host1x_video
        Model            : NVIDIA Tegra Video Input Device
        Serial           :
        Bus info         :
        Media version    : 5.5.0
        Hardware revision: 0x00000003 (3)
        Driver version   : 5.5.0
Interface Info:
        ID               : 0x03000003
        Type             : V4L Video
Entity Info:
        ID               : 0x00000001 (1)
        Name             : 54080000.vi-output-0
        Function         : V4L2 I/O
        Pad 0x01000002   : 0: Sink
          Link 0x0200001b: from remote pad 0x100001a of entity 'tpg-0': Data, Enabled

Required ioctls:
        test MC information (see 'Media Driver Info' above): OK
        test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
        test second /dev/video0 open: OK
        test VIDIOC_QUERYCAP: OK
        test VIDIOC_G/S_PRIORITY: OK
        test for unlimited opens: OK

        test invalid ioctls: OK
Debug ioctls:
        test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
        test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
        test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
        test VIDIOC_ENUMAUDIO: OK (Not Supported)
        test VIDIOC_G/S/ENUMINPUT: OK
        test VIDIOC_G/S_AUDIO: OK (Not Supported)
        Inputs: 1 Audio Inputs: 0 Tuners: 0

Output ioctls:
        test VIDIOC_G/S_MODULATOR: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_ENUMAUDOUT: OK (Not Supported)
        test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDOUT: OK (Not Supported)
        Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
        test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
        test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
        test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
        test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls (Input 0):
        test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
        test VIDIOC_QUERYCTRL: OK
        test VIDIOC_G/S_CTRL: OK
        test VIDIOC_G/S/TRY_EXT_CTRLS: OK
        test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
        test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
        Standard Controls: 2 Private Controls: 0

Format ioctls (Input 0):
        test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
        test VIDIOC_G/S_PARM: OK (Not Supported)
        test VIDIOC_G_FBUF: OK (Not Supported)
        test VIDIOC_G_FMT: OK
        test VIDIOC_TRY_FMT: OK
        test VIDIOC_S_FMT: OK
        test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
        test Cropping: OK (Not Supported)
        test Composing: OK (Not Supported)
        test Scaling: OK (Not Supported)

Codec ioctls (Input 0):
        test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
        test VIDIOC_G_ENC_INDEX: OK (Not Supported)
        test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls (Input 0):
        test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
        test VIDIOC_EXPBUF: OK
        test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
        test read/write: OK
        test blocking wait: OK
        test MMAP (no poll): OK
        test MMAP (select): OK
        test MMAP (epoll): OK
        test USERPTR (no poll): OK (Not Supported)
        test USERPTR (select): OK (Not Supported)
        test DMABUF: Cannot test, specify --expbuf-device

Total for tegra-video device /dev/video0: 53, Succeeded: 53, Failed: 0, Warnings: 0

-- 
2.7.4


^ permalink raw reply	[flat|nested] 55+ messages in thread

* [RFC PATCH v1 1/5] dt-bindings: clock: tegra: Add clk id for CSI TPG clock
  2020-01-28 18:23 [RFC PATCH v1 0/5] Add Tegra driver for video capture Sowjanya Komatineni
@ 2020-01-28 18:23 ` Sowjanya Komatineni
  2020-02-05 19:23   ` Stephen Boyd
  2020-01-28 18:23 ` [RFC PATCH v1 2/5] clk: tegra: Add Tegra210 CSI TPG clock gate Sowjanya Komatineni
                   ` (5 subsequent siblings)
  6 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-28 18:23 UTC (permalink / raw)
  To: skomatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Tegra210 uses PLLD out internally for CSI TPG.

This patch adds clk id for this CSI TPG clock from PLLD.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 include/dt-bindings/clock/tegra210-car.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index 44f60623f99b..dc22aaec8805 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -349,7 +349,7 @@
 #define TEGRA210_CLK_PLL_P_OUT_XUSB 317
 #define TEGRA210_CLK_XUSB_SSP_SRC 318
 #define TEGRA210_CLK_PLL_RE_OUT1 319
-/* 320 */
+#define TEGRA210_CLK_CSI_TPG 320
 /* 321 */
 #define TEGRA210_CLK_ISP 322
 #define TEGRA210_CLK_PLL_A_OUT_ADSP 323
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 55+ messages in thread

* [RFC PATCH v1 2/5] clk: tegra: Add Tegra210 CSI TPG clock gate
  2020-01-28 18:23 [RFC PATCH v1 0/5] Add Tegra driver for video capture Sowjanya Komatineni
  2020-01-28 18:23 ` [RFC PATCH v1 1/5] dt-bindings: clock: tegra: Add clk id for CSI TPG clock Sowjanya Komatineni
@ 2020-01-28 18:23 ` Sowjanya Komatineni
  2020-02-05 19:23   ` Stephen Boyd
  2020-01-28 18:23 ` [RFC PATCH v1 3/5] dt-binding: tegra: Add VI and CSI bindings Sowjanya Komatineni
                   ` (4 subsequent siblings)
  6 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-28 18:23 UTC (permalink / raw)
  To: skomatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Tegra210 CSI hardware internally uses PLLD for internal test pattern
generator logic.

PLLD_BASE register in CAR has a bit CSI_CLK_SOURCE to enable PLLD
out to CSI during TPG mode.

This patch adds this CSI TPG clock gate to Tegra210 clock driver
to allow Tegra video driver to ungate CSI TPG clock during TPG mode
and gate during non TPG mode.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 762cd186f714..e66498b5fd6f 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -3041,6 +3041,13 @@ static __init void tegra210_periph_clk_init(void __iomem *clk_base,
 					     periph_clk_enb_refcnt);
 	clks[TEGRA210_CLK_DSIB] = clk;
 
+	/* csi_tpg */
+	clk = clk_register_gate(NULL, "csi_tpg", "pll_d_out0",
+				CLK_SET_RATE_PARENT, clk_base + PLLD_BASE,
+				23, 0, &pll_d_lock);
+	clk_register_clkdev(clk, "csi_tpg", NULL);
+	clks[TEGRA210_CLK_CSI_TPG] = clk;
+
 	/* la */
 	clk = tegra_clk_register_periph("la", la_parents,
 			ARRAY_SIZE(la_parents), &tegra210_la, clk_base,
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 55+ messages in thread

* [RFC PATCH v1 3/5] dt-binding: tegra: Add VI and CSI bindings
  2020-01-28 18:23 [RFC PATCH v1 0/5] Add Tegra driver for video capture Sowjanya Komatineni
  2020-01-28 18:23 ` [RFC PATCH v1 1/5] dt-bindings: clock: tegra: Add clk id for CSI TPG clock Sowjanya Komatineni
  2020-01-28 18:23 ` [RFC PATCH v1 2/5] clk: tegra: Add Tegra210 CSI TPG clock gate Sowjanya Komatineni
@ 2020-01-28 18:23 ` Sowjanya Komatineni
  2020-01-28 20:32   ` Helen Koike
  2020-01-28 18:23 ` [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210 Sowjanya Komatineni
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-28 18:23 UTC (permalink / raw)
  To: skomatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Tegra contains VI controller which can support up to 6 MIPI CSI
camera sensors.

Each Tegra CSI port from CSI unit can be one-to-one mapper to
VI channel and can capture from an external camera sensor or
from built-in test pattern generator.

This patch adds dt-bindings for Tegra VI and CSI.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 .../bindings/display/tegra/nvidia,tegra20-host1x.txt           | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 9999255ac5b6..47cd6532b7d3 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -40,7 +40,7 @@ of the following host1x client modules:
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-vi"
-  - reg: Physical base address and length of the controller's registers.
+  - reg: Physical base address and length of the controller registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain one entry, for the module clock.
     See ../clocks/clock-bindings.txt for details.
@@ -49,6 +49,14 @@ of the following host1x client modules:
   - reset-names: Must include the following entries:
     - vi
 
+- csi: mipi csi interface to vi
+
+  Required properties:
+  - compatible: "nvidia,tegra<chip>-csi"
+  - reg: Physical base address and length of the controller registers.
+  - clocks: Must contain entries csi, cilab, cilcd, cile clocks.
+    See ../clocks/clock-bindings.txt for details.
+
 - epp: encoder pre-processor
 
   Required properties:
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 55+ messages in thread

* [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 18:23 [RFC PATCH v1 0/5] Add Tegra driver for video capture Sowjanya Komatineni
                   ` (2 preceding siblings ...)
  2020-01-28 18:23 ` [RFC PATCH v1 3/5] dt-binding: tegra: Add VI and CSI bindings Sowjanya Komatineni
@ 2020-01-28 18:23 ` Sowjanya Komatineni
  2020-01-28 21:45   ` Helen Koike
                     ` (4 more replies)
  2020-01-28 18:23 ` [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree Sowjanya Komatineni
                   ` (2 subsequent siblings)
  6 siblings, 5 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-28 18:23 UTC (permalink / raw)
  To: skomatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Tegra210 contains a powerful Video Input (VI) hardware controller
which can support up to 6 MIPI CSI camera sensors.

Each Tegra CSI port can be one-to-one mapped to VI channel and can
capture from an external camera sensor connected to CSI or from
built-in test pattern generator.

Tegra210 supports built-in test pattern generator from CSI to VI.

This patch adds a V4L2 media controller and capture driver support
for Tegra210 built-in CSI to VI test pattern generator.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 drivers/staging/media/Kconfig               |   2 +
 drivers/staging/media/Makefile              |   1 +
 drivers/staging/media/tegra/Kconfig         |  12 +
 drivers/staging/media/tegra/Makefile        |  11 +
 drivers/staging/media/tegra/TODO            |  10 +
 drivers/staging/media/tegra/csi.h           | 111 +++++
 drivers/staging/media/tegra/csi2_fops.c     | 335 +++++++++++++++
 drivers/staging/media/tegra/csi2_fops.h     |  15 +
 drivers/staging/media/tegra/host1x-video.c  | 120 ++++++
 drivers/staging/media/tegra/host1x-video.h  |  33 ++
 drivers/staging/media/tegra/mc_common.h     | 131 ++++++
 drivers/staging/media/tegra/tegra-channel.c | 628 ++++++++++++++++++++++++++++
 drivers/staging/media/tegra/tegra-core.c    | 111 +++++
 drivers/staging/media/tegra/tegra-core.h    | 125 ++++++
 drivers/staging/media/tegra/tegra-csi.c     | 380 +++++++++++++++++
 drivers/staging/media/tegra/tegra-vi.c      | 351 ++++++++++++++++
 drivers/staging/media/tegra/tegra-vi.h      | 101 +++++
 drivers/staging/media/tegra/vi2_fops.c      | 364 ++++++++++++++++
 drivers/staging/media/tegra/vi2_fops.h      |  15 +
 drivers/staging/media/tegra/vi2_formats.h   | 119 ++++++
 drivers/staging/media/tegra/vi2_registers.h | 194 +++++++++
 21 files changed, 3169 insertions(+)
 create mode 100644 drivers/staging/media/tegra/Kconfig
 create mode 100644 drivers/staging/media/tegra/Makefile
 create mode 100644 drivers/staging/media/tegra/TODO
 create mode 100644 drivers/staging/media/tegra/csi.h
 create mode 100644 drivers/staging/media/tegra/csi2_fops.c
 create mode 100644 drivers/staging/media/tegra/csi2_fops.h
 create mode 100644 drivers/staging/media/tegra/host1x-video.c
 create mode 100644 drivers/staging/media/tegra/host1x-video.h
 create mode 100644 drivers/staging/media/tegra/mc_common.h
 create mode 100644 drivers/staging/media/tegra/tegra-channel.c
 create mode 100644 drivers/staging/media/tegra/tegra-core.c
 create mode 100644 drivers/staging/media/tegra/tegra-core.h
 create mode 100644 drivers/staging/media/tegra/tegra-csi.c
 create mode 100644 drivers/staging/media/tegra/tegra-vi.c
 create mode 100644 drivers/staging/media/tegra/tegra-vi.h
 create mode 100644 drivers/staging/media/tegra/vi2_fops.c
 create mode 100644 drivers/staging/media/tegra/vi2_fops.h
 create mode 100644 drivers/staging/media/tegra/vi2_formats.h
 create mode 100644 drivers/staging/media/tegra/vi2_registers.h

diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index c394abffea86..e367030d4407 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -34,6 +34,8 @@ source "drivers/staging/media/sunxi/Kconfig"
 
 source "drivers/staging/media/tegra-vde/Kconfig"
 
+source "drivers/staging/media/tegra/Kconfig"
+
 source "drivers/staging/media/ipu3/Kconfig"
 
 source "drivers/staging/media/soc_camera/Kconfig"
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index ea9fce8014bb..67a22ac709e8 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_VIDEO_IPU3_IMGU)	+= ipu3/
 obj-$(CONFIG_SOC_CAMERA)	+= soc_camera/
 obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0)	+= phy-rockchip-dphy-rx0/
 obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1)	+= rkisp1/
+obj-$(CONFIG_VIDEO_TEGRA)	+= tegra/
diff --git a/drivers/staging/media/tegra/Kconfig b/drivers/staging/media/tegra/Kconfig
new file mode 100644
index 000000000000..443b99f2e2c9
--- /dev/null
+++ b/drivers/staging/media/tegra/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_TEGRA
+	tristate "NVIDIA Tegra VI driver"
+	depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
+	depends on COMMON_CLK
+	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CONTROLLER
+	select TEGRA_HOST1X
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_FWNODE
+	help
+	  Say yes here to enable support for Tegra video input hardware
diff --git a/drivers/staging/media/tegra/Makefile b/drivers/staging/media/tegra/Makefile
new file mode 100644
index 000000000000..003d23444d49
--- /dev/null
+++ b/drivers/staging/media/tegra/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+tegra-video-y := \
+		host1x-video.o \
+		tegra-channel.o \
+		tegra-core.o \
+		csi2_fops.o \
+		vi2_fops.o \
+		tegra-vi.o \
+		tegra-csi.o
+
+obj-$(CONFIG_VIDEO_TEGRA) += tegra-video.o
diff --git a/drivers/staging/media/tegra/TODO b/drivers/staging/media/tegra/TODO
new file mode 100644
index 000000000000..d7d64b13535e
--- /dev/null
+++ b/drivers/staging/media/tegra/TODO
@@ -0,0 +1,10 @@
+TODO list
+* Currently driver supports Tegra build-in TPG Only with direct media links from CSI to VI.
+  Update the driver to do TPG Vs Sensor media links based on the kernel config CONFIG_VIDEO_TEGRA_TPG.
+* Add real camera sensor capture support
+* Add RAW10 packed video format support to Tegra210 video formats
+* Add Tegra CSI MIPI pads calibration
+* Add MIPI clock Settle time computation based on the data rate
+* Add support for Ganged mode
+* Make sure v4l2-compliance tests pass with all of the above implementations.
+* Add SMMU support for VI to avoid cma_alloc failures with higher resolutions of some video formats.
diff --git a/drivers/staging/media/tegra/csi.h b/drivers/staging/media/tegra/csi.h
new file mode 100644
index 000000000000..81cdda4b6bdd
--- /dev/null
+++ b/drivers/staging/media/tegra/csi.h
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __CSI_H_
+#define __CSI_H_
+
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf2-v4l2.h>
+
+/*
+ * Each CSI brick supports max of 4 lanes that can be used as either
+ * one x4 port using both CILA and CILB partitions of a CSI brick or can
+ * be used as two x2 ports with one x2 from CILA and the other x2 from
+ * CILB.
+ */
+#define CSI_LANES_PER_BRICK	4
+#define CSI_PORTS_PER_BRICK	2
+
+/* each CSI channel can have one sink and one source pads */
+#define TEGRA_CSI_PADS_NUM	2
+
+enum tegra_csi_cil_port {
+	PORT_A = 0,
+	PORT_B,
+};
+
+enum tegra_csi_block {
+	CSI_CIL_AB = 0,
+	CSI_CIL_CD,
+	CSI_CIL_EF,
+};
+
+struct tegra_csi_device;
+
+struct tegra_csi_port {
+	void __iomem *pixel_parser;
+	void __iomem *cila;
+	void __iomem *cilb;
+	void __iomem *tpg;
+
+	/* one pair of sink/source pad has one format */
+	struct v4l2_mbus_framefmt format;
+	unsigned int lanes;
+};
+
+struct tegra_csi_channel {
+	struct list_head list;
+	struct v4l2_subdev subdev;
+	struct media_pad pads[TEGRA_CSI_PADS_NUM];
+	struct device_node *of_node;
+	struct tegra_csi_device *csi;
+	struct tegra_csi_port *ports;
+	unsigned int numlanes;
+	unsigned int numpads;
+	u8 csi_port_num;
+
+	/* protects csi channel ports format fields */
+	struct mutex format_lock;
+};
+
+struct tegra_csi_soc_data {
+	const struct tegra_csi_fops *csi_fops;
+	unsigned int cil_max_clk_hz;
+	unsigned int num_tpg_channels;
+};
+
+/**
+ * struct tegra_csi_device - NVIDIA Tegra CSI device structure
+ * @dev: device struct
+ * @client: host1x_client struct
+ *
+ * @iomem: register base
+ * @csi_clk: clock for CSI
+ * @cilab_clk: clock for CIL AB
+ * @cilcd_clk: clock for CIL CD
+ * @cilef_clk: clock for CIL EF
+ * @tpg_clk: clock for internal CSI TPG logic
+ *
+ * @soc_data: pointer to SoC data structure
+ * @fops: csi operations
+ *
+ * @channels: list of CSI channels
+ */
+struct tegra_csi_device {
+	struct device *dev;
+	struct host1x_client client;
+
+	void __iomem *iomem;
+	struct clk *csi_clk;
+	struct clk *cilab_clk;
+	struct clk *cilcd_clk;
+	struct clk *cilef_clk;
+	struct clk *tpg_clk;
+	atomic_t clk_refcnt;
+
+	const struct tegra_csi_soc_data *soc_data;
+	const struct tegra_csi_fops *fops;
+
+	struct list_head csi_chans;
+};
+
+void tegra_csi_error_status(struct v4l2_subdev *subdev);
+
+#endif
diff --git a/drivers/staging/media/tegra/csi2_fops.c b/drivers/staging/media/tegra/csi2_fops.c
new file mode 100644
index 000000000000..5f2f7bd3ae50
--- /dev/null
+++ b/drivers/staging/media/tegra/csi2_fops.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk/tegra.h>
+#include <linux/delay.h>
+
+#include "vi2_registers.h"
+#include "mc_common.h"
+#include "csi2_fops.h"
+#include "csi.h"
+
+/* CSI block registers offset */
+#define TEGRA210_CSI_PORT_OFFSET		0x34
+/* CSI CIL parition registers offset */
+#define TEGRA210_CSI_CIL_OFFSET			0x0f4
+/* CSI TPG registers offset */
+#define TEGRA210_CSI_TPG_OFFSET			0x18c
+
+#define CSI_PP_OFFSET(block)	((block) * 0x800)
+
+static void csi_write(struct tegra_csi_channel *chan, u8 block,
+		      unsigned int addr, u32 val)
+{
+	void __iomem *csi_pp_base;
+
+	csi_pp_base = chan->csi->iomem + CSI_PP_OFFSET(block);
+	writel(val, csi_pp_base + addr);
+}
+
+/* Pixel parser registers accessors */
+static void pp_write(struct tegra_csi_port *port, u32 addr, u32 val)
+{
+	writel(val, port->pixel_parser + addr);
+}
+
+static u32 pp_read(struct tegra_csi_port *port, u32 addr)
+{
+	return readl(port->pixel_parser + addr);
+}
+
+/* CSI CIL A/B port registers accessors */
+static void cil_write(struct tegra_csi_port *port, u8 port_id,
+		      u32 addr, u32 val)
+{
+	if (port_id & PORT_B)
+		writel(val, port->cilb + addr);
+	else
+		writel(val, port->cila + addr);
+}
+
+static u32 cil_read(struct tegra_csi_port *port, u8 port_id,
+		    u32 addr)
+{
+	if (port_id & PORT_B)
+		return readl(port->cilb + addr);
+	else
+		return readl(port->cila + addr);
+}
+
+/* Test pattern generator registers accessor */
+static void tpg_write(struct tegra_csi_port *port, unsigned int addr, u32 val)
+{
+	writel(val, port->tpg + addr);
+}
+
+static void csi2_error_status(struct tegra_csi_channel *csi_chan)
+{
+	struct tegra_csi_device *csi = csi_chan->csi;
+	unsigned int port_num = csi_chan->csi_port_num;
+	struct tegra_csi_port *port = csi_chan->ports;
+	u32 val;
+
+	val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
+	dev_err(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n", val);
+
+	val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
+	dev_err(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
+
+	val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
+	dev_err(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
+}
+
+static int csi2_start_streaming(struct tegra_csi_channel *csi_chan,
+				u8 pg_mode, int enable)
+{
+	struct tegra_csi_device *csi = csi_chan->csi;
+	unsigned int port_num = csi_chan->csi_port_num;
+	unsigned int block = port_num >> 1;
+	struct tegra_csi_port *port = csi_chan->ports;
+	unsigned int cil_max_freq = csi->soc_data->cil_max_clk_hz;
+	struct clk *cil_clk;
+	int ret;
+
+	if (block == CSI_CIL_AB)
+		cil_clk = csi->cilab_clk;
+	else if (block == CSI_CIL_CD)
+		cil_clk = csi->cilcd_clk;
+	else
+		cil_clk = csi->cilef_clk;
+
+	if (enable) {
+		ret = clk_set_rate(cil_clk, cil_max_freq);
+		if (ret)
+			dev_err(csi->dev,
+				"failed to set cil clk rate, err: %d\n", ret);
+
+		/* enable CIL clock on first open */
+		if (atomic_add_return(1, &csi->clk_refcnt) == 1) {
+			ret = clk_prepare_enable(cil_clk);
+			if (ret) {
+				dev_err(csi->dev,
+					"failed to enable cil clk, err: %d\n",
+					ret);
+				return ret;
+			}
+		}
+
+		/*
+		 * On Tegra210, TPG internal logic uses PLLD out along with
+		 * the CIL clock.
+		 * So, enable TPG clock during TPG mode streaming.
+		 */
+		if (pg_mode) {
+			ret = clk_set_rate(csi->tpg_clk, TEGRA210_TPG_CLOCK);
+			if (ret)
+				dev_err(csi->dev,
+					"failed to set tpg clk rate\n");
+
+			ret = clk_prepare_enable(csi->tpg_clk);
+			if (ret) {
+				dev_err(csi->dev,
+					"failed to enable tpg clk, err: %d\n",
+					ret);
+				return ret;
+			}
+		}
+
+		csi_write(csi_chan, block, TEGRA_CSI_CLKEN_OVERRIDE, 0);
+
+		/* clean up status */
+		pp_write(port, TEGRA_CSI_PIXEL_PARSER_STATUS, 0xFFFFFFFF);
+		cil_write(port, port_num, TEGRA_CSI_CIL_STATUS, 0xFFFFFFFF);
+		cil_write(port, port_num, TEGRA_CSI_CILX_STATUS, 0xFFFFFFFF);
+		cil_write(port, port_num, TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
+
+		/* CIL PHY registers setup */
+		cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
+		cil_write(port, port_num, TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
+
+		/*
+		 * The CSI unit provides for connection of up to six cameras in
+		 * the system and is organized as three identical instances of
+		 * two MIPI support blocks, each with a separate 4-lane
+		 * interface that can be configured as a single camera with 4
+		 * lanes or as a dual camera with 2 lanes available for each
+		 * camera.
+		 */
+		if (port->lanes == 4) {
+			cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0,
+				  BRICK_CLOCK_A_4X);
+
+			cil_write(port, (port_num + 1),
+				  TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
+
+			cil_write(port, (port_num + 1),
+				  TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
+
+			cil_write(port, (port_num + 1),
+				  TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
+
+			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
+				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_ENABLE);
+		} else {
+			u32 val = ((port_num & 1) == PORT_A) ?
+				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_NOP :
+				  CSI_B_PHY_CIL_ENABLE | CSI_A_PHY_CIL_NOP;
+			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
+				  val);
+		}
+
+		/* CSI pixel parser registers setup */
+		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
+			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
+			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_RST);
+		pp_write(port, TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK, 0x0);
+		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL0,
+			 CSI_PP_PACKET_HEADER_SENT |
+			 CSI_PP_DATA_IDENTIFIER_ENABLE |
+			 CSI_PP_WORD_COUNT_SELECT_HEADER |
+			 CSI_PP_CRC_CHECK_ENABLE |  CSI_PP_WC_CHECK |
+			 CSI_PP_OUTPUT_FORMAT_STORE |
+			 CSI_PP_HEADER_EC_DISABLE | CSI_PPA_PAD_FRAME_NOPAD |
+			 (port_num & 1));
+		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL1,
+			 (0x1 << CSI_PP_TOP_FIELD_FRAME_OFFSET) |
+			 (0x1 << CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET));
+		pp_write(port, TEGRA_CSI_PIXEL_STREAM_GAP,
+			 0x14 << PP_FRAME_MIN_GAP_OFFSET);
+		pp_write(port, TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME, 0x0);
+		pp_write(port, TEGRA_CSI_INPUT_STREAM_CONTROL,
+			 (0x3f << CSI_SKIP_PACKET_THRESHOLD_OFFSET) |
+			 (port->lanes - 1));
+
+		/* TPG setup */
+		if (pg_mode) {
+			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
+				  ((pg_mode - 1) << PG_MODE_OFFSET) |
+				  PG_ENABLE);
+			tpg_write(port, TEGRA_CSI_PG_PHASE, 0x0);
+			tpg_write(port, TEGRA_CSI_PG_RED_FREQ,
+				  (0x10 << PG_RED_VERT_INIT_FREQ_OFFSET) |
+				  (0x10 << PG_RED_HOR_INIT_FREQ_OFFSET));
+			tpg_write(port, TEGRA_CSI_PG_RED_FREQ_RATE, 0x0);
+			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ,
+				  (0x10 << PG_GREEN_VERT_INIT_FREQ_OFFSET) |
+				  (0x10 << PG_GREEN_HOR_INIT_FREQ_OFFSET));
+			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ_RATE, 0x0);
+			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ,
+				  (0x10 << PG_BLUE_VERT_INIT_FREQ_OFFSET) |
+				  (0x10 << PG_BLUE_HOR_INIT_FREQ_OFFSET));
+			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ_RATE, 0x0);
+		}
+
+		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
+			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
+			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_ENABLE);
+	} else {
+		u32 val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
+
+		dev_dbg(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n",
+			val);
+
+		val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
+		dev_dbg(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
+
+		val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
+		dev_dbg(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
+
+		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
+			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
+			 CSI_PP_DISABLE);
+
+		if (pg_mode) {
+			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
+				  ((pg_mode - 1) << PG_MODE_OFFSET) |
+				  PG_DISABLE);
+			clk_disable_unprepare(csi->tpg_clk);
+		}
+
+		if (port->lanes == 4) {
+			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
+				  CSI_A_PHY_CIL_DISABLE |
+				  CSI_B_PHY_CIL_DISABLE);
+
+		} else {
+			u32 val = ((port_num & 1) == PORT_A) ?
+				  CSI_A_PHY_CIL_DISABLE | CSI_B_PHY_CIL_NOP :
+				  CSI_B_PHY_CIL_DISABLE | CSI_A_PHY_CIL_NOP;
+			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
+				  val);
+		}
+	}
+
+	return 0;
+}
+
+static int csi2_hw_init(struct tegra_csi_device *csi)
+{
+	struct tegra_csi_channel *csi_chan;
+	struct tegra_csi_port *port;
+	u8 portno;
+	int ret;
+
+	csi->cilab_clk = devm_clk_get(csi->dev, "cilab");
+	if (IS_ERR(csi->cilab_clk)) {
+		dev_err(csi->dev, "Failed to get cilab clock\n");
+		return PTR_ERR(csi->cilab_clk);
+	}
+
+	csi->cilcd_clk = devm_clk_get(csi->dev, "cilcd");
+	if (IS_ERR(csi->cilcd_clk)) {
+		dev_err(csi->dev, "Failed to get cilcd clock\n");
+		return PTR_ERR(csi->cilcd_clk);
+	}
+
+	csi->cilef_clk = devm_clk_get(csi->dev, "cile");
+	if (IS_ERR(csi->cilef_clk)) {
+		dev_err(csi->dev, "Failed to get cile clock\n");
+		return PTR_ERR(csi->cilef_clk);
+	}
+
+	csi->tpg_clk = devm_clk_get(csi->dev, "csi_tpg");
+	if (IS_ERR(csi->tpg_clk)) {
+		dev_err(csi->dev, "Failed to get csi_tpg clock\n");
+		return PTR_ERR(csi->tpg_clk);
+	}
+
+	csi->csi_clk = devm_clk_get(csi->dev, "csi");
+	if (IS_ERR(csi->csi_clk)) {
+		dev_err(csi->dev, "Failed to get csi clock\n");
+		return PTR_ERR(csi->csi_clk);
+	}
+
+	ret = clk_prepare_enable(csi->csi_clk);
+	if (ret) {
+		dev_err(csi->dev, "Failed to enable csi clk, err: %d\n", ret);
+		return ret;
+	}
+
+	list_for_each_entry(csi_chan, &csi->csi_chans, list) {
+		void __iomem *csi_pp_base;
+
+		port = csi_chan->ports;
+		portno = csi_chan->csi_port_num;
+		csi_pp_base = csi->iomem + CSI_PP_OFFSET(portno >> 1);
+		port->pixel_parser = csi_pp_base +
+				     (portno % CSI_PORTS_PER_BRICK) *
+				     TEGRA210_CSI_PORT_OFFSET;
+		port->cila = csi_pp_base + TEGRA210_CSI_CIL_OFFSET;
+		port->cilb = port->cila + TEGRA210_CSI_PORT_OFFSET;
+		port->tpg = port->pixel_parser + TEGRA210_CSI_TPG_OFFSET;
+	}
+
+	return 0;
+}
+
+const struct tegra_csi_fops csi2_fops = {
+	.hw_init = csi2_hw_init,
+	.csi_start_streaming = csi2_start_streaming,
+	.csi_err_status = csi2_error_status,
+};
+EXPORT_SYMBOL(csi2_fops);
diff --git a/drivers/staging/media/tegra/csi2_fops.h b/drivers/staging/media/tegra/csi2_fops.h
new file mode 100644
index 000000000000..cf22a28ceb1f
--- /dev/null
+++ b/drivers/staging/media/tegra/csi2_fops.h
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __CSI2_H__
+#define __CSI2_H__
+
+#define	TEGRA210_TPG_CLOCK		594000000
+#define	TEGRA210_CSI_CIL_CLK_MAX	102000000
+#define TEGRA210_CSI_BRICKS_MAX		3
+
+extern const struct tegra_csi_fops csi2_fops;
+
+#endif
diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
new file mode 100644
index 000000000000..740806121e6b
--- /dev/null
+++ b/drivers/staging/media/tegra/host1x-video.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/host1x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "host1x-video.h"
+
+static int host1x_video_probe(struct host1x_device *dev)
+{
+	struct tegra_camera *cam;
+	int ret;
+
+	cam = devm_kzalloc(&dev->dev, sizeof(*cam), GFP_KERNEL);
+	if (!cam)
+		return -ENOMEM;
+
+	cam->dev = get_device(&dev->dev);
+	cam->media_dev.dev = cam->dev;
+	strscpy(cam->media_dev.model, "NVIDIA Tegra Video Input Device",
+		sizeof(cam->media_dev.model));
+	cam->media_dev.hw_revision = 3;
+
+	media_device_init(&cam->media_dev);
+	ret = media_device_register(&cam->media_dev);
+	if (ret < 0) {
+		dev_err(cam->dev, "failed to register media device: %d\n", ret);
+		return ret;
+	}
+
+	cam->v4l2_dev.mdev = &cam->media_dev;
+	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
+	if (ret < 0) {
+		dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
+		goto register_error;
+	}
+
+	dev_set_drvdata(&dev->dev, cam);
+
+	ret = host1x_device_init(dev);
+	if (ret < 0)
+		goto dev_exit;
+
+	return 0;
+
+dev_exit:
+	host1x_device_exit(dev);
+	v4l2_device_unregister(&cam->v4l2_dev);
+register_error:
+	media_device_unregister(&cam->media_dev);
+	media_device_cleanup(&cam->media_dev);
+
+	return ret;
+}
+
+static int host1x_video_remove(struct host1x_device *dev)
+{
+	struct tegra_camera *cam = dev_get_drvdata(&dev->dev);
+
+	host1x_device_exit(dev);
+	v4l2_device_unregister(&cam->v4l2_dev);
+	media_device_unregister(&cam->media_dev);
+	media_device_cleanup(&cam->media_dev);
+
+	return 0;
+}
+
+static const struct of_device_id host1x_video_subdevs[] = {
+	{ .compatible = "nvidia,tegra210-csi", },
+	{ .compatible = "nvidia,tegra210-vi", },
+	{ }
+};
+
+static struct host1x_driver host1x_video_driver = {
+	.driver = {
+		.name = "host1x_video",
+	},
+	.probe = host1x_video_probe,
+	.remove = host1x_video_remove,
+	.subdevs = host1x_video_subdevs,
+};
+
+static struct platform_driver * const drivers[] = {
+	&tegra_csi_driver,
+	&tegra_vi_driver,
+};
+
+static int __init host1x_video_init(void)
+{
+	int err;
+
+	err = host1x_driver_register(&host1x_video_driver);
+	if (err < 0)
+		return err;
+
+	err = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
+	if (err < 0)
+		goto unregister_host1x;
+
+	return 0;
+
+unregister_host1x:
+	host1x_driver_unregister(&host1x_video_driver);
+	return err;
+}
+module_init(host1x_video_init);
+
+static void __exit host1x_video_exit(void)
+{
+	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
+	host1x_driver_unregister(&host1x_video_driver);
+}
+module_exit(host1x_video_exit);
+
+MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra Host1x Video driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
new file mode 100644
index 000000000000..84d28e6f4362
--- /dev/null
+++ b/drivers/staging/media/tegra/host1x-video.h
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef HOST1X_VIDEO_H
+#define HOST1X_VIDEO_H 1
+
+#include <linux/host1x.h>
+
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf2-v4l2.h>
+
+#include "tegra-vi.h"
+#include "csi.h"
+
+struct tegra_camera {
+	struct v4l2_device v4l2_dev;
+	struct media_device media_dev;
+	struct device *dev;
+	struct tegra_vi *vi;
+	struct tegra_csi_device *csi;
+};
+
+extern struct platform_driver tegra_vi_driver;
+extern struct platform_driver tegra_csi_driver;
+
+#endif /* HOST1X_VIDEO_H */
diff --git a/drivers/staging/media/tegra/mc_common.h b/drivers/staging/media/tegra/mc_common.h
new file mode 100644
index 000000000000..9e88f3295ef4
--- /dev/null
+++ b/drivers/staging/media/tegra/mc_common.h
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __MC_COMMON_H_
+#define __MC_COMMON_H_
+
+#include <linux/host1x.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf2-v4l2.h>
+
+#include "tegra-core.h"
+#include "tegra-vi.h"
+#include "csi.h"
+
+#define MAX_FORMAT_NUM	64
+
+struct tegra_csi_fops {
+	int (*hw_init)(struct tegra_csi_device *csi);
+	int (*csi_start_streaming)(struct tegra_csi_channel *csi_chan,
+				   u8 pg_mode, int enable);
+	void (*csi_err_status)(struct tegra_csi_channel *csi_chan);
+};
+
+/**
+ * struct tegra_channel - Tegra video channel
+ * @list: list entry in a composite device dmas list
+ * @video: V4L2 video device associated with the video channel
+ * @video_lock: protects the @format and @queue fields
+ * @pad: media pad for the video device entity
+ *
+ * @vi: composite device DT node port number for the channel
+ *
+ * @sp: host1x syncpoint pointer
+ *
+ * @kthread_capture_start: capture start kthread of this video channel
+ * @start_wait: wait queue used by capture start kthread
+ * @kthread_capture_done: capture done kthread of this video channel
+ * @done_wait: wait queue used by capture done kthread
+ *
+ * @format: active V4L2 pixel format
+ * @fmtinfo: format information corresponding to the active @format
+ * @video_formats: supported video formats
+ * @nformats: supported number of video formats
+ *
+ * @queue: vb2 buffers queue
+ * @sequence: V4L2 buffers sequence number
+ *
+ * @capture: list of queued buffers for capture
+ * @start_lock: protects the capture queued list
+ * @done: list of capture done queued buffers
+ * @done_lock: protects the capture done queue list
+ *
+ * @stride_align: channel buffer stride alignment
+ * @width_align: channel buffer width alignment
+ * @height_align: channel buffer height alignment
+ * @size_align: channel buffer size alignment
+
+ * @port: CSI port of this video channel
+ *
+ * @ctrl_handler: V4L2 control handler of this video channel
+ * @tpg_fmts_bitmap: a bitmap for supported TPG formats
+ */
+struct tegra_channel {
+	struct list_head list;
+	struct video_device video;
+	/* protects the @format and @queue fields */
+	struct mutex video_lock;
+	struct media_pad pad;
+
+	struct tegra_vi *vi;
+	struct host1x_syncpt *sp;
+
+	struct task_struct *kthread_capture_start;
+	wait_queue_head_t start_wait;
+	struct task_struct *kthread_capture_done;
+	wait_queue_head_t done_wait;
+
+	struct v4l2_pix_format format;
+	const struct tegra_video_format *fmtinfo;
+	const struct tegra_video_format *video_formats;
+	unsigned int nformats;
+	struct vb2_queue queue;
+	u32 sequence;
+
+	struct list_head capture;
+	/* protects the capture queued list */
+	spinlock_t start_lock;
+	struct list_head done;
+	/* protects the capture done queue list */
+	spinlock_t done_lock;
+
+	unsigned int stride_align;
+	unsigned int width_align;
+	unsigned int height_align;
+	unsigned int size_align;
+	unsigned char port;
+
+	struct v4l2_ctrl_handler ctrl_handler;
+	DECLARE_BITMAP(tpg_fmts_bitmap, MAX_FORMAT_NUM);
+};
+
+#define to_tegra_channel(vdev) \
+	container_of(vdev, struct tegra_channel, video)
+
+const struct tegra_video_format *tegra_core_get_default_format(void);
+u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
+				 unsigned int index);
+int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
+			       unsigned int offset);
+const struct tegra_video_format *
+tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc);
+
+int tegra_channel_init(struct tegra_channel *chan);
+int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan);
+int tegra_channel_cleanup(struct tegra_channel *chan);
+int tegra_channel_set_stream(struct tegra_channel *chan, bool on);
+void tegra_channel_queued_buf_done(struct tegra_channel *chan,
+				   enum vb2_buffer_state state);
+int tegra_channel_csi_error_status(struct tegra_channel *chan);
+
+#endif
diff --git a/drivers/staging/media/tegra/tegra-channel.c b/drivers/staging/media/tegra/tegra-channel.c
new file mode 100644
index 000000000000..7561f6fb8748
--- /dev/null
+++ b/drivers/staging/media/tegra/tegra-channel.c
@@ -0,0 +1,628 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/atomic.h>
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/host1x.h>
+#include <linux/kthread.h>
+#include <linux/lcm.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-event.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include <soc/tegra/pmc.h>
+
+#include "mc_common.h"
+#include "tegra-vi.h"
+#include "host1x-video.h"
+
+#define MAX_CID_CONTROLS		1
+
+static const char *const vi_pattern_strings[] = {
+	"Black/White Direct Mode",
+	"Color Patch Mode",
+};
+
+static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct tegra_channel *chan = container_of(ctrl->handler,
+						  struct tegra_channel,
+						  ctrl_handler);
+
+	switch (ctrl->id) {
+	case V4L2_CID_TEST_PATTERN:
+		chan->vi->pg_mode = ctrl->val + 1;
+		dev_info(chan->vi->dev, "TPG mode is set to %s\n",
+			 vi_pattern_strings[ctrl->val]);
+		break;
+
+	default:
+		dev_err(chan->vi->dev, "Invalid Tegra video control\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops vi_ctrl_ops = {
+	.s_ctrl	= vi_s_ctrl,
+};
+
+/*
+ * videobuf2 queue operations
+ */
+static int tegra_channel_queue_setup(struct vb2_queue *vq,
+				     unsigned int *nbuffers,
+				     unsigned int *nplanes,
+				     unsigned int sizes[],
+				     struct device *alloc_devs[])
+{
+	struct tegra_channel *chan = vb2_get_drv_priv(vq);
+	unsigned int count = *nbuffers;
+
+	if (*nplanes)
+		return sizes[0] < chan->format.sizeimage ? -EINVAL : 0;
+
+	*nplanes = 1;
+	sizes[0] = chan->format.sizeimage;
+	alloc_devs[0] = chan->vi->dev;
+
+	return 0;
+}
+
+static int tegra_channel_buffer_prepare(struct vb2_buffer *vb)
+{
+	struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
+	unsigned long size = chan->format.sizeimage;
+
+	if (vb2_plane_size(vb, 0) < size) {
+		v4l2_err(chan->video.v4l2_dev, "buffer too small (%lu < %lu)\n",
+			 vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+
+	vb2_set_plane_payload(vb, 0, size);
+	buf->chan = chan;
+	buf->addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+
+	return 0;
+}
+
+static void tegra_channel_buffer_queue(struct vb2_buffer *vb)
+{
+	struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
+
+	/* put buffer into the capture queue */
+	spin_lock(&chan->start_lock);
+	list_add_tail(&buf->queue, &chan->capture);
+	spin_unlock(&chan->start_lock);
+
+	/* wait up kthread for capture */
+	wake_up_interruptible(&chan->start_wait);
+}
+
+int tegra_channel_csi_error_status(struct tegra_channel *chan)
+{
+	struct media_entity *entity;
+	struct media_pad *pad;
+	struct v4l2_subdev *subdev;
+
+	pad = media_entity_remote_pad(&chan->pad);
+	if (!pad)
+		return -ENODEV;
+
+	entity = pad->entity;
+	subdev = media_entity_to_v4l2_subdev(entity);
+
+	tegra_csi_error_status(subdev);
+
+	return 0;
+}
+
+static struct v4l2_subdev *
+tegra_channel_get_remote_subdev(struct tegra_channel *chan)
+{
+	struct media_pad *pad;
+	struct v4l2_subdev *subdev;
+	struct media_entity *entity;
+
+	pad = media_entity_remote_pad(&chan->pad);
+	entity = pad->entity;
+	subdev = media_entity_to_v4l2_subdev(entity);
+
+	return subdev;
+}
+
+int tegra_channel_set_stream(struct tegra_channel *chan, bool on)
+{
+	struct v4l2_subdev *subdev;
+	int ret;
+
+	/* stream CSI */
+	subdev = tegra_channel_get_remote_subdev(chan);
+	v4l2_set_subdev_hostdata(subdev, chan);
+	ret = v4l2_subdev_call(subdev, video, s_stream, on);
+	if (on && ret < 0 && ret != -ENOIOCTLCMD)
+		return ret;
+
+	return 0;
+}
+
+void tegra_channel_queued_buf_done(struct tegra_channel *chan,
+				   enum vb2_buffer_state state)
+{
+	struct tegra_channel_buffer *buf, *nbuf;
+
+	spin_lock(&chan->start_lock);
+	list_for_each_entry_safe(buf, nbuf, &chan->capture, queue) {
+		vb2_buffer_done(&buf->buf.vb2_buf, state);
+		list_del(&buf->queue);
+	}
+
+	spin_unlock(&chan->start_lock);
+}
+
+static int tegra_channel_start_streaming(struct vb2_queue *vq, u32 count)
+{
+	struct tegra_channel *chan = vb2_get_drv_priv(vq);
+
+	if (chan->vi->fops->vi_start_streaming)
+		return chan->vi->fops->vi_start_streaming(vq, count);
+
+	return 0;
+}
+
+static void tegra_channel_stop_streaming(struct vb2_queue *vq)
+{
+	struct tegra_channel *chan = vb2_get_drv_priv(vq);
+
+	if (chan->vi->fops->vi_start_streaming)
+		chan->vi->fops->vi_stop_streaming(vq);
+}
+
+static const struct vb2_ops tegra_channel_queue_qops = {
+	.queue_setup = tegra_channel_queue_setup,
+	.buf_prepare = tegra_channel_buffer_prepare,
+	.buf_queue = tegra_channel_buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = tegra_channel_start_streaming,
+	.stop_streaming = tegra_channel_stop_streaming,
+};
+
+/*
+ * V4L2 ioctls
+ */
+static int tegra_channel_querycap(struct file *file, void *fh,
+				  struct v4l2_capability *cap)
+{
+	struct v4l2_fh *vfh = file->private_data;
+	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
+
+	cap->device_caps = chan->video.device_caps;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	strscpy(cap->driver, "tegra-video", sizeof(cap->driver));
+	strscpy(cap->card, chan->video.name, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s:%u",
+		 dev_name(chan->vi->dev), chan->port);
+
+	return 0;
+}
+
+static int tegra_channel_enum_format(struct file *file, void *fh,
+				     struct v4l2_fmtdesc *f)
+{
+	struct v4l2_fh *vfh = file->private_data;
+	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
+	unsigned int index = 0, i;
+	unsigned long *fmts_bitmap = chan->tpg_fmts_bitmap;
+
+	if (f->index >= bitmap_weight(fmts_bitmap, MAX_FORMAT_NUM))
+		return -EINVAL;
+
+	for (i = 0; i < f->index + 1; i++, index++)
+		index = find_next_bit(fmts_bitmap, MAX_FORMAT_NUM, index);
+
+	f->pixelformat = tegra_core_get_fourcc_by_idx(chan, index - 1);
+
+	return 0;
+}
+
+static void
+tegra_channel_fmt_align(struct tegra_channel *chan,
+			const struct tegra_frac *bpp,
+			u32 *width, u32 *height, u32 *bytesperline)
+{
+	unsigned int min_width, max_width;
+	unsigned int min_bpl, max_bpl, bpl;
+	unsigned int align, fmt_align;
+	unsigned int temp_width, temp_bpl;
+	unsigned int numerator, denominator;
+
+	denominator = (!bpp->denominator) ? 1 : bpp->denominator;
+	numerator = (!bpp->numerator) ? 1 : bpp->numerator;
+	fmt_align = (denominator == 1) ? numerator : 1;
+	align = lcm(chan->width_align, fmt_align);
+	bpl = (*width * numerator) / denominator;
+
+	if (chan->vi->fops->vi_stride_align)
+		chan->vi->fops->vi_stride_align(&bpl);
+
+	if (!*bytesperline)
+		*bytesperline = bpl;
+
+	/*
+	 * The transfer alignment requirements are expressed in bytes. Compute
+	 * the minimum and maximum values, clamp the requested width and convert
+	 * it back to pixels.
+	 * use bytesperline to adjust width for applicaton related requriements.
+	 */
+	min_width = roundup(TEGRA_MIN_WIDTH, align);
+	max_width = rounddown(TEGRA_MAX_WIDTH, align);
+	temp_width = roundup(bpl, align);
+	*width = (clamp(temp_width, min_width, max_width) * denominator) /
+			numerator;
+	*height = clamp(*height, TEGRA_MIN_HEIGHT, TEGRA_MAX_HEIGHT);
+
+	/*
+	 * Clamp the requested bytes per line value. If the maximum bytes per
+	 * line value is zero, the module doesn't support user configurable line
+	 * sizes. Override the requested value with the minimum in that case.
+	 */
+	min_bpl = bpl;
+	max_bpl = rounddown(TEGRA_MAX_WIDTH, chan->stride_align);
+	temp_bpl = roundup(*bytesperline, chan->stride_align);
+	*bytesperline = clamp(temp_bpl, min_bpl, max_bpl);
+}
+
+static void tegra_channel_update_format(struct tegra_channel *chan, u32 width,
+					u32 height, u32 fourcc,
+					const struct tegra_frac *bpp,
+					u32 preferred_stride)
+{
+	u32 denominator = (!bpp->denominator) ? 1 : bpp->denominator;
+	u32 numerator = (!bpp->numerator) ? 1 : bpp->numerator;
+	u32 bytesperline = (width * numerator / denominator);
+	u32 sizeimage, height_aligned;
+
+	chan->format.width = width;
+	chan->format.height = height;
+	chan->format.pixelformat = fourcc;
+	chan->format.bytesperline = preferred_stride ?: bytesperline;
+
+	tegra_channel_fmt_align(chan, bpp,
+				&chan->format.width,
+				&chan->format.height,
+				&chan->format.bytesperline);
+
+	/* calculate the sizeimage per plane */
+	height_aligned = roundup(chan->format.height, chan->height_align);
+	sizeimage = chan->format.bytesperline * height_aligned;
+	chan->format.sizeimage = roundup(sizeimage, chan->size_align);
+}
+
+static int tegra_channel_get_format(struct file *file, void *fh,
+				    struct v4l2_format *format)
+{
+	struct v4l2_fh *vfh = file->private_data;
+	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
+
+	format->fmt.pix = chan->format;
+
+	return 0;
+}
+
+static int __tegra_channel_try_format(struct tegra_channel *chan,
+				      struct v4l2_pix_format *pix,
+				      const struct tegra_video_format **vfmt)
+{
+	const struct tegra_video_format *fmt_info;
+	struct v4l2_subdev *subdev;
+	struct v4l2_subdev_format fmt;
+	struct v4l2_subdev_pad_config *pad_cfg;
+
+	subdev = tegra_channel_get_remote_subdev(chan);
+	pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
+	if (!pad_cfg)
+		return -ENOMEM;
+
+	/*
+	 * Retrieve format information and select the default format if the
+	 * requested format isn't supported.
+	 */
+	fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
+	if (!fmt_info) {
+		pix->pixelformat = chan->format.pixelformat;
+		pix->colorspace = chan->format.colorspace;
+		fmt_info = tegra_core_get_format_by_fourcc(chan,
+							   pix->pixelformat);
+	}
+
+	/* Change this when start adding interlace format support */
+	pix->field = V4L2_FIELD_NONE;
+	fmt.which = V4L2_SUBDEV_FORMAT_TRY;
+	fmt.pad = 0;
+	v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
+	v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
+
+	v4l2_fill_pix_format(pix, &fmt.format);
+	tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
+				&pix->bytesperline);
+	pix->sizeimage = pix->bytesperline * pix->height;
+
+	if (vfmt)
+		*vfmt = fmt_info;
+
+	v4l2_subdev_free_pad_config(pad_cfg);
+
+	return 0;
+}
+
+static int tegra_channel_try_format(struct file *file, void *fh,
+				    struct v4l2_format *format)
+{
+	struct v4l2_fh *vfh = file->private_data;
+	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
+
+	return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
+}
+
+static int tegra_channel_set_format(struct file *file, void *fh,
+				    struct v4l2_format *format)
+{
+	struct v4l2_fh *vfh = file->private_data;
+	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
+	const struct tegra_video_format *info;
+	int ret;
+	struct v4l2_subdev_format fmt;
+	struct v4l2_subdev *subdev;
+	struct v4l2_pix_format *pix = &format->fmt.pix;
+
+	if (vb2_is_busy(&chan->queue))
+		return -EBUSY;
+
+	/* get supported format by try_fmt */
+	ret = __tegra_channel_try_format(chan, pix, &info);
+	if (ret)
+		return ret;
+
+	subdev = tegra_channel_get_remote_subdev(chan);
+
+	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt.pad = 0;
+	v4l2_fill_mbus_format(&fmt.format, pix, info->code);
+	v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
+
+	v4l2_fill_pix_format(pix, &fmt.format);
+	chan->format = *pix;
+	chan->fmtinfo = info;
+	tegra_channel_update_format(chan, pix->width,
+				    pix->height, info->fourcc,
+				    &info->bpp,
+				    pix->bytesperline);
+	*pix = chan->format;
+
+	return 0;
+}
+
+static int tegra_channel_enum_input(struct file *file, void *fh,
+				    struct v4l2_input *inp)
+{
+	/* Currently driver supports internal TPG only */
+	if (inp->index != 0)
+		return -EINVAL;
+
+	inp->type = V4L2_INPUT_TYPE_CAMERA;
+	strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
+
+	return 0;
+}
+
+static int tegra_channel_g_input(struct file *file, void *priv,
+				 unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int tegra_channel_s_input(struct file *file, void *priv,
+				 unsigned int input)
+{
+	if (input > 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops tegra_channel_ioctl_ops = {
+	.vidioc_querycap		= tegra_channel_querycap,
+	.vidioc_enum_fmt_vid_cap	= tegra_channel_enum_format,
+	.vidioc_g_fmt_vid_cap		= tegra_channel_get_format,
+	.vidioc_s_fmt_vid_cap		= tegra_channel_set_format,
+	.vidioc_try_fmt_vid_cap		= tegra_channel_try_format,
+	.vidioc_enum_input		= tegra_channel_enum_input,
+	.vidioc_g_input			= tegra_channel_g_input,
+	.vidioc_s_input			= tegra_channel_s_input,
+	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
+	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
+	.vidioc_querybuf		= vb2_ioctl_querybuf,
+	.vidioc_qbuf			= vb2_ioctl_qbuf,
+	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
+	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
+	.vidioc_expbuf			= vb2_ioctl_expbuf,
+	.vidioc_streamon		= vb2_ioctl_streamon,
+	.vidioc_streamoff		= vb2_ioctl_streamoff,
+	.vidioc_subscribe_event		= v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
+};
+
+/*
+ * V4L2 file operations
+ */
+static const struct v4l2_file_operations tegra_channel_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= video_ioctl2,
+	.open		= v4l2_fh_open,
+	.release	= vb2_fop_release,
+	.read		= vb2_fop_read,
+	.poll		= vb2_fop_poll,
+	.mmap		= vb2_fop_mmap,
+};
+
+int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan)
+{
+	int ret;
+
+	/* Add test pattern control handler to v4l2 device */
+	v4l2_ctrl_new_std_menu_items(&chan->ctrl_handler, &vi_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(vi_pattern_strings) - 1,
+				     0, 0, vi_pattern_strings);
+	if (chan->ctrl_handler.error) {
+		dev_err(chan->vi->dev, "failed to add TPG ctrl handler\n");
+		v4l2_ctrl_handler_free(&chan->ctrl_handler);
+		return chan->ctrl_handler.error;
+	}
+
+	/* setup the controls */
+	ret = v4l2_ctrl_handler_setup(&chan->ctrl_handler);
+	if (ret < 0) {
+		dev_err(chan->vi->dev, "failed to setup v4l2 ctrl handler\n");
+		goto free_hdl;
+	}
+
+	return 0;
+
+free_hdl:
+	v4l2_ctrl_handler_free(&chan->ctrl_handler);
+	return ret;
+}
+
+int tegra_channel_init(struct tegra_channel *chan)
+{
+	struct tegra_vi *vi = chan->vi;
+	struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
+	int ret;
+
+	mutex_init(&chan->video_lock);
+	INIT_LIST_HEAD(&chan->capture);
+	INIT_LIST_HEAD(&chan->done);
+	spin_lock_init(&chan->start_lock);
+	spin_lock_init(&chan->done_lock);
+	init_waitqueue_head(&chan->start_wait);
+	init_waitqueue_head(&chan->done_wait);
+
+	/* Default alignments */
+	chan->width_align = TEGRA_WIDTH_ALIGNMENT;
+	chan->stride_align = TEGRA_STRIDE_ALIGNMENT;
+	chan->height_align = TEGRA_HEIGHT_ALIGNMENT;
+	chan->size_align = TEGRA_SIZE_ALIGNMENT;
+
+	/* initialize the video format */
+	chan->fmtinfo = tegra_core_get_default_format();
+	chan->format.colorspace = V4L2_COLORSPACE_SRGB;
+	chan->format.field = V4L2_FIELD_NONE;
+	tegra_channel_update_format(chan, TEGRA_DEF_WIDTH, TEGRA_DEF_HEIGHT,
+				    chan->fmtinfo->fourcc,
+				    &chan->fmtinfo->bpp, 0);
+
+	/* initialize the media entity */
+	chan->pad.flags = MEDIA_PAD_FL_SINK;
+	ret = media_entity_pads_init(&chan->video.entity, 1, &chan->pad);
+	if (ret < 0)
+		return ret;
+
+	ret = v4l2_ctrl_handler_init(&chan->ctrl_handler, MAX_CID_CONTROLS);
+	if (chan->ctrl_handler.error) {
+		dev_err(vi->dev,
+			"V4L2 controls handler init failed: %d\n", ret);
+		goto ctrl_init_error;
+	}
+
+	/* initialize the video_device */
+	chan->video.fops = &tegra_channel_fops;
+	chan->video.v4l2_dev = &cam->v4l2_dev;
+	chan->video.queue = &chan->queue;
+	snprintf(chan->video.name, sizeof(chan->video.name), "%s-%s-%u",
+		 dev_name(vi->dev), "output", chan->port);
+	chan->video.vfl_type = VFL_TYPE_GRABBER;
+	chan->video.vfl_dir = VFL_DIR_RX;
+	chan->video.release = video_device_release_empty;
+	chan->video.ioctl_ops = &tegra_channel_ioctl_ops;
+	chan->video.ctrl_handler = &chan->ctrl_handler;
+	chan->video.lock = &chan->video_lock;
+	chan->video.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+				  V4L2_CAP_READWRITE;
+
+	video_set_drvdata(&chan->video, chan);
+	chan->sp = host1x_syncpt_request(&vi->client, HOST1X_SYNCPT_HAS_BASE);
+	if (!chan->sp) {
+		dev_err(vi->dev, "failed to request syncpoint\n");
+		ret = -ENOMEM;
+		goto host1x_sp_error;
+	}
+
+	chan->queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	chan->queue.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
+	chan->queue.lock = &chan->video_lock;
+	chan->queue.drv_priv = chan;
+	chan->queue.buf_struct_size = sizeof(struct tegra_channel_buffer);
+	chan->queue.ops = &tegra_channel_queue_qops;
+	chan->queue.mem_ops = &vb2_dma_contig_memops;
+	chan->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
+				   | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;
+	chan->queue.dev = vi->dev;
+	ret = vb2_queue_init(&chan->queue);
+	if (ret < 0) {
+		dev_err(vi->dev,
+			"failed to initialize VB2 queue, err: %d\n", ret);
+		goto vb2_init_error;
+	}
+
+	ret = video_register_device(&chan->video, VFL_TYPE_GRABBER, -1);
+	if (ret < 0) {
+		dev_err(&chan->video.dev,
+			"failed to register video device, err: %d\n", ret);
+		goto video_register_error;
+	}
+
+	return 0;
+
+video_register_error:
+	vb2_queue_release(&chan->queue);
+vb2_init_error:
+	host1x_syncpt_free(chan->sp);
+host1x_sp_error:
+	v4l2_ctrl_handler_free(&chan->ctrl_handler);
+ctrl_init_error:
+	media_entity_cleanup(&chan->video.entity);
+	return ret;
+}
+
+int tegra_channel_cleanup(struct tegra_channel *chan)
+{
+	if (video_is_registered(&chan->video)) {
+		video_unregister_device(&chan->video);
+		vb2_queue_release(&chan->queue);
+		media_entity_cleanup(&chan->video.entity);
+	}
+
+	host1x_syncpt_free(chan->sp);
+	v4l2_ctrl_handler_free(&chan->ctrl_handler);
+
+	return 0;
+}
diff --git a/drivers/staging/media/tegra/tegra-core.c b/drivers/staging/media/tegra/tegra-core.c
new file mode 100644
index 000000000000..80ede3ad7266
--- /dev/null
+++ b/drivers/staging/media/tegra/tegra-core.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "mc_common.h"
+#include "tegra-core.h"
+
+static const struct tegra_video_format tegra_default_format = {
+	/* RAW 10 */
+	TEGRA_VF_RAW10,
+	10,
+	MEDIA_BUS_FMT_SRGGB10_1X10,
+	{2, 1},
+	TEGRA_IMAGE_FORMAT_DEF,
+	TEGRA_IMAGE_DT_RAW10,
+	V4L2_PIX_FMT_SRGGB10,
+	"RGRG.. GBGB..",
+};
+
+/*
+ * Helper functions
+ */
+
+/**
+ * tegra_core_get_default_format - Get default format
+ *
+ * Return: pointer to the format where the default format needs
+ * to be filled in.
+ */
+const struct tegra_video_format *tegra_core_get_default_format(void)
+{
+	return &tegra_default_format;
+}
+
+/**
+ * tegra_core_get_fourcc_by_idx - get fourcc of a tegra_video format
+ * @index: array index of the tegra_video_formats
+ *
+ * Return: fourcc code
+ */
+u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
+				 unsigned int index)
+{
+	if (index >= chan->nformats)
+		return -EINVAL;
+
+	return chan->video_formats[index].fourcc;
+}
+
+/**
+ * tegra_core_get_word_count - Calculate word count
+ * @frame_width: number of pixels per line
+ * @fmt: Tegra Video format struct which has BPP information
+ *
+ * Return: word count number
+ */
+u32 tegra_core_get_word_count(unsigned int frame_width,
+			      const struct tegra_video_format *fmt)
+{
+	return frame_width * fmt->width / 8;
+}
+
+/**
+ * tegra_core_get_idx_by_code - Retrieve index for a media bus code
+ * @chan: tegra_channel
+ * @code: the format media bus code
+ * @offset: offset in video formats from where to start the search
+ *
+ * Return: a index to the format information structure corresponding to the
+ * given V4L2 media bus format @code, or -1 if no corresponding format can
+ * be found.
+ */
+int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
+			       unsigned int offset)
+{
+	unsigned int i;
+
+	for (i = offset; i < chan->nformats; ++i) {
+		if (chan->video_formats[i].code == code)
+			return i;
+	}
+
+	return -1;
+}
+
+/**
+ * tegra_core_get_format_by_fourcc - Retrieve format information for a 4CC
+ * @fourcc: the format 4CC
+ *
+ * Return: a pointer to the format information structure corresponding to the
+ * given V4L2 format @fourcc, or NULL if no corresponding format can be
+ * found.
+ */
+const struct tegra_video_format *
+tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < chan->nformats; ++i) {
+		if (chan->video_formats[i].fourcc == fourcc)
+			return &chan->video_formats[i];
+	}
+
+	return NULL;
+}
diff --git a/drivers/staging/media/tegra/tegra-core.h b/drivers/staging/media/tegra/tegra-core.h
new file mode 100644
index 000000000000..193065d20a95
--- /dev/null
+++ b/drivers/staging/media/tegra/tegra-core.h
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __TEGRA_CORE_H__
+#define __TEGRA_CORE_H__
+
+#include <media/v4l2-subdev.h>
+
+/* Minimum and maximum width and height common to Tegra video input device. */
+#define TEGRA_MIN_WIDTH		32U
+#define TEGRA_MAX_WIDTH		32768U
+#define TEGRA_MIN_HEIGHT	32U
+#define TEGRA_MAX_HEIGHT	32768U
+
+/* Width alignment */
+#define TEGRA_WIDTH_ALIGNMENT	1
+/* Stride alignment */
+#define TEGRA_STRIDE_ALIGNMENT	1
+/* Height alignment */
+#define TEGRA_HEIGHT_ALIGNMENT	1
+/* Size alignment */
+#define TEGRA_SIZE_ALIGNMENT	1
+
+/* 1080p resolution as default resolution for test pattern generator */
+#define TEGRA_DEF_WIDTH		1920
+#define TEGRA_DEF_HEIGHT	1080
+
+#define TEGRA_VF_DEF		MEDIA_BUS_FMT_SRGGB10_1X10
+#define TEGRA_IMAGE_FORMAT_DEF	32
+
+/*
+ * These go into the TEGRA_VI_CSI_n_CSI_IMAGE_DT registers bits 7:0
+ * Input data type of VI channel.
+ */
+enum tegra_image_dt {
+	TEGRA_IMAGE_DT_YUV420_8 = 24,
+	TEGRA_IMAGE_DT_YUV420_10,
+
+	TEGRA_IMAGE_DT_YUV420CSPS_8 = 28,
+	TEGRA_IMAGE_DT_YUV420CSPS_10,
+	TEGRA_IMAGE_DT_YUV422_8,
+	TEGRA_IMAGE_DT_YUV422_10,
+	TEGRA_IMAGE_DT_RGB444,
+	TEGRA_IMAGE_DT_RGB555,
+	TEGRA_IMAGE_DT_RGB565,
+	TEGRA_IMAGE_DT_RGB666,
+	TEGRA_IMAGE_DT_RGB888,
+
+	TEGRA_IMAGE_DT_RAW6 = 40,
+	TEGRA_IMAGE_DT_RAW7,
+	TEGRA_IMAGE_DT_RAW8,
+	TEGRA_IMAGE_DT_RAW10,
+	TEGRA_IMAGE_DT_RAW12,
+	TEGRA_IMAGE_DT_RAW14,
+};
+
+/* Supported CSI to VI Data Formats */
+enum tegra_vf_code {
+	TEGRA_VF_RAW6 = 0,
+	TEGRA_VF_RAW7,
+	TEGRA_VF_RAW8,
+	TEGRA_VF_RAW10,
+	TEGRA_VF_RAW12,
+	TEGRA_VF_RAW14,
+	TEGRA_VF_EMBEDDED8,
+	TEGRA_VF_RGB565,
+	TEGRA_VF_RGB555,
+	TEGRA_VF_RGB888,
+	TEGRA_VF_RGB444,
+	TEGRA_VF_RGB666,
+	TEGRA_VF_YUV422,
+	TEGRA_VF_YUV420,
+	TEGRA_VF_YUV420_CSPS,
+};
+
+/**
+ * struct tegra_frac
+ * @numerator: numerator of the fraction
+ * @denominator: denominator of the fraction
+ */
+struct tegra_frac {
+	unsigned int numerator;
+	unsigned int denominator;
+};
+
+/**
+ * struct tegra_video_format - Tegra video format description
+ * @vf_code: video format code
+ * @width: format width in bits per component
+ * @code: media bus format code
+ * @bpp: bytes per pixel (when stored in memory)
+ * @img_fmt: image format
+ * @img_dt: image data type
+ * @fourcc: V4L2 pixel format FCC identifier
+ * @description: format description, suitable for userspace
+ */
+struct tegra_video_format {
+	enum tegra_vf_code vf_code;
+	unsigned int width;
+	unsigned int code;
+	struct tegra_frac bpp;
+	u32 img_fmt;
+	enum tegra_image_dt img_dt;
+	u32 fourcc;
+	__u8 description[32];
+};
+
+#define	TEGRA_VIDEO_FORMAT(VF_CODE, BPP, MBUS_CODE, FRAC_BPP_NUM,	\
+	FRAC_BPP_DEN, FORMAT, DATA_TYPE, FOURCC, DESCRIPTION)		\
+{									\
+	TEGRA_VF_##VF_CODE,						\
+	BPP,								\
+	MEDIA_BUS_FMT_##MBUS_CODE,					\
+	{FRAC_BPP_NUM, FRAC_BPP_DEN},					\
+	TEGRA_IMAGE_FORMAT_##FORMAT,					\
+	TEGRA_IMAGE_DT_##DATA_TYPE,					\
+	V4L2_PIX_FMT_##FOURCC,						\
+	DESCRIPTION,							\
+}
+
+u32 tegra_core_get_word_count(unsigned int frame_width,
+			      const struct tegra_video_format *fmt);
+#endif
diff --git a/drivers/staging/media/tegra/tegra-csi.c b/drivers/staging/media/tegra/tegra-csi.c
new file mode 100644
index 000000000000..f6153acd60cb
--- /dev/null
+++ b/drivers/staging/media/tegra/tegra-csi.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk/tegra.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/host1x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+
+#include "csi.h"
+#include "mc_common.h"
+#include "csi2_fops.h"
+#include "host1x-video.h"
+#include "vi2_registers.h"
+
+static inline struct tegra_csi_device *
+host1x_client_to_csi(struct host1x_client *client)
+{
+	return container_of(client, struct tegra_csi_device, client);
+}
+
+static inline struct tegra_csi_channel *to_csi_chan(struct v4l2_subdev *subdev)
+{
+	return container_of(subdev, struct tegra_csi_channel, subdev);
+}
+
+/*
+ * V4L2 Subdevice Video Operations
+ */
+static int tegra_csi_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
+	struct tegra_csi_device *csi = csi_chan->csi;
+	struct tegra_channel *chan = subdev->host_priv;
+	u8 pg_mode = chan->vi->pg_mode;
+
+	return csi->fops->csi_start_streaming(csi_chan, pg_mode, enable);
+}
+
+/*
+ * Only use this subdevice media bus ops for test pattern generator,
+ * because CSI device is an separated subdevice which has 6 source
+ * pads to generate test pattern.
+ */
+static struct v4l2_mbus_framefmt tegra_csi_tpg_fmts[] = {
+	{
+		TEGRA_DEF_WIDTH,
+		TEGRA_DEF_HEIGHT,
+		MEDIA_BUS_FMT_SRGGB10_1X10,
+		V4L2_FIELD_NONE,
+		V4L2_COLORSPACE_SRGB
+	},
+	{
+		TEGRA_DEF_WIDTH,
+		TEGRA_DEF_HEIGHT,
+		MEDIA_BUS_FMT_RGB888_1X32_PADHI,
+		V4L2_FIELD_NONE,
+		V4L2_COLORSPACE_SRGB
+	}
+
+};
+
+static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
+	{1280, 720},
+	{1920, 1080},
+	{3840, 2160},
+};
+
+/*
+ * V4L2 Subdevice Pad Operations
+ */
+static int tegra_csi_get_format(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_pad_config *cfg,
+				struct v4l2_subdev_format *fmt)
+{
+	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
+
+	mutex_lock(&csi_chan->format_lock);
+	memcpy(fmt, &csi_chan->ports->format,
+	       sizeof(struct v4l2_mbus_framefmt));
+	mutex_unlock(&csi_chan->format_lock);
+
+	return 0;
+}
+
+static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
+				   struct v4l2_mbus_framefmt *mfmt)
+{
+	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
+	struct tegra_csi_device *csi = csi_chan->csi;
+	const struct v4l2_frmsize_discrete *sizes;
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
+		struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
+
+		if (mfmt->code == mbus_fmt->code) {
+			for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
+				sizes = &tegra_csi_tpg_sizes[j];
+				if (mfmt->width == sizes->width &&
+				    mfmt->height == sizes->height) {
+					return;
+				}
+			}
+		}
+
+		dev_info(csi->dev, "using Tegra default RAW10 video format\n");
+	}
+
+	dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
+	memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
+}
+
+static int tegra_csi_set_format(struct v4l2_subdev *subdev,
+				struct v4l2_subdev_pad_config *cfg,
+				struct v4l2_subdev_format *fmt)
+{
+	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
+	struct v4l2_mbus_framefmt *format = &fmt->format;
+
+	tegra_csi_try_mbus_fmt(subdev, format);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+		return 0;
+
+	mutex_lock(&csi_chan->format_lock);
+	memcpy(&csi_chan->ports->format, format,
+	       sizeof(struct v4l2_mbus_framefmt));
+	mutex_unlock(&csi_chan->format_lock);
+
+	return 0;
+}
+
+/*
+ * V4L2 Subdevice Operations
+ */
+static struct v4l2_subdev_video_ops tegra_csi_video_ops = {
+	.s_stream = tegra_csi_s_stream,
+};
+
+static struct v4l2_subdev_pad_ops tegra_csi_pad_ops = {
+	.get_fmt		= tegra_csi_get_format,
+	.set_fmt		= tegra_csi_set_format,
+};
+
+static struct v4l2_subdev_ops tegra_csi_ops = {
+	.video  = &tegra_csi_video_ops,
+	.pad    = &tegra_csi_pad_ops,
+};
+
+/*
+ * Media Operations
+ */
+static const struct media_entity_operations tegra_csi_media_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static int tegra_csi_tpg_channels_alloc(struct tegra_csi_device *csi)
+{
+	struct device_node *node = csi->dev->of_node;
+	unsigned int port_num;
+	int ret;
+	struct tegra_csi_channel *item;
+	unsigned int tpg_channels = csi->soc_data->num_tpg_channels;
+
+	/* allocate CSI channel for each CSI x2 ports */
+	for (port_num = 0; port_num < tpg_channels; port_num++) {
+		item = devm_kzalloc(csi->dev, sizeof(*item), GFP_KERNEL);
+		if (!item) {
+			ret = -ENOMEM;
+			goto error;
+		}
+
+		list_add_tail(&item->list, &csi->csi_chans);
+		item->csi = csi;
+		item->csi_port_num = port_num;
+		item->numlanes = 2;
+		item->of_node = node;
+		item->numpads = 1;
+		item->pads[0].flags = MEDIA_PAD_FL_SOURCE;
+	}
+
+	return 0;
+
+error:
+	list_for_each_entry(item, &csi->csi_chans, list)
+		list_del(&item->list);
+
+	return ret;
+}
+
+static int tegra_csi_channel_init(struct tegra_csi_channel *chan)
+{
+	struct tegra_csi_device *csi = chan->csi;
+	struct v4l2_subdev *subdev;
+	int ret;
+
+	chan->ports = devm_kzalloc(csi->dev, sizeof(struct tegra_csi_port),
+				   GFP_KERNEL);
+	if (!chan->ports)
+		return -ENOMEM;
+
+	mutex_init(&chan->format_lock);
+
+	/* initialize the default format */
+	chan->ports->format.code = TEGRA_VF_DEF;
+	chan->ports->format.field = V4L2_FIELD_NONE;
+	chan->ports->format.colorspace = V4L2_COLORSPACE_SRGB;
+	chan->ports->format.width = TEGRA_DEF_WIDTH;
+	chan->ports->format.height = TEGRA_DEF_HEIGHT;
+	chan->ports->lanes = chan->numlanes;
+
+	/* initialize V4L2 subdevice and media entity */
+	subdev = &chan->subdev;
+	v4l2_subdev_init(subdev, &tegra_csi_ops);
+	subdev->dev = csi->dev;
+	snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "%s-%d", "tpg",
+		 chan->csi_port_num);
+
+	v4l2_set_subdevdata(subdev, chan);
+	subdev->fwnode = of_fwnode_handle(chan->of_node);
+	subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	subdev->entity.ops = &tegra_csi_media_ops;
+
+	/* initialize media entity pads */
+	ret = media_entity_pads_init(&subdev->entity, chan->numpads,
+				     chan->pads);
+	if (ret < 0)
+		return ret;
+
+	ret = v4l2_async_register_subdev(subdev);
+	if (ret < 0) {
+		dev_err(csi->dev, "failed to register subdev\n");
+		media_entity_cleanup(&subdev->entity);
+	}
+
+	return ret;
+}
+
+void tegra_csi_error_status(struct v4l2_subdev *subdev)
+{
+	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
+	struct tegra_csi_device *csi = csi_chan->csi;
+
+	csi->fops->csi_err_status(csi_chan);
+}
+EXPORT_SYMBOL(tegra_csi_error_status);
+
+static int tegra_csi_init(struct host1x_client *client)
+{
+	struct tegra_csi_device *csi = host1x_client_to_csi(client);
+	struct tegra_camera *cam = dev_get_drvdata(client->host);
+	struct tegra_csi_channel *item;
+	int ret;
+
+	cam->csi = csi;
+
+	INIT_LIST_HEAD(&csi->csi_chans);
+
+	ret = tegra_csi_tpg_channels_alloc(csi);
+	if (ret < 0)
+		return ret;
+
+	list_for_each_entry(item, &csi->csi_chans, list) {
+		ret = tegra_csi_channel_init(item);
+		if (ret)
+			return ret;
+	}
+
+	ret = csi->fops->hw_init(csi);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int tegra_csi_exit(struct host1x_client *client)
+{
+	struct tegra_camera *cam = dev_get_drvdata(client->host);
+	struct v4l2_subdev *subdev;
+	struct tegra_csi_channel *chan;
+
+	if (!cam->csi)
+		return 0;
+
+	list_for_each_entry(chan, &cam->csi->csi_chans, list) {
+		mutex_destroy(&chan->format_lock);
+		subdev = &chan->subdev;
+		media_entity_cleanup(&subdev->entity);
+		v4l2_async_unregister_subdev(subdev);
+	}
+
+	return 0;
+}
+
+static const struct host1x_client_ops csi_client_ops = {
+	.init = tegra_csi_init,
+	.exit = tegra_csi_exit,
+};
+
+static int tegra_csi_probe(struct platform_device *pdev)
+{
+	struct tegra_csi_device *csi;
+	struct resource *res;
+	int ret;
+
+	csi = devm_kzalloc(&pdev->dev, sizeof(*csi), GFP_KERNEL);
+	if (!csi)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	csi->iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(csi->iomem))
+		return PTR_ERR(csi->iomem);
+
+	csi->soc_data = of_device_get_match_data(&pdev->dev);
+	if (!csi->soc_data) {
+		dev_info(&pdev->dev, "No platform data\n\n");
+		return -ENODATA;
+	}
+
+	csi->dev = &pdev->dev;
+	csi->fops = csi->soc_data->csi_fops;
+	platform_set_drvdata(pdev, csi);
+
+	/* initialize host1x interface */
+	INIT_LIST_HEAD(&csi->client.list);
+	csi->client.ops = &csi_client_ops;
+	csi->client.dev = &pdev->dev;
+
+	ret = host1x_client_register(&csi->client);
+	if (ret < 0) {
+		dev_err(csi->dev, "failed to register host1x client: %d\n",
+			ret);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int tegra_csi_remove(struct platform_device *pdev)
+{
+	struct tegra_csi_device *csi = platform_get_drvdata(pdev);
+
+	host1x_client_unregister(&csi->client);
+
+	return 0;
+}
+
+static struct tegra_csi_soc_data tegra210_csi_data = {
+	.csi_fops = &csi2_fops,
+	.cil_max_clk_hz = TEGRA210_CSI_CIL_CLK_MAX,
+	.num_tpg_channels = TEGRA210_MAX_CHANNELS,
+};
+
+static const struct of_device_id tegra_csi_of_id_table[] = {
+	{ .compatible = "nvidia,tegra210-csi", .data = &tegra210_csi_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tegra_csi_of_id_table);
+
+struct platform_driver tegra_csi_driver = {
+	.driver = {
+		.name		= "tegra-csi",
+		.of_match_table	= tegra_csi_of_id_table,
+	},
+	.probe			= tegra_csi_probe,
+	.remove			= tegra_csi_remove,
+};
+
+MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra CSI Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/media/tegra/tegra-vi.c b/drivers/staging/media/tegra/tegra-vi.c
new file mode 100644
index 000000000000..6f5950b7988e
--- /dev/null
+++ b/drivers/staging/media/tegra/tegra-vi.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/host1x.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-fwnode.h>
+
+#include <soc/tegra/pmc.h>
+
+#include "host1x-video.h"
+#include "mc_common.h"
+#include "vi2_formats.h"
+#include "vi2_registers.h"
+#include "vi2_fops.h"
+#include "tegra-vi.h"
+
+static inline struct tegra_vi *
+host1x_client_to_vi(struct host1x_client *client)
+{
+	return container_of(client, struct tegra_vi, client);
+}
+
+/* VI only support 2 formats in TPG mode */
+static void vi_tpg_fmts_bitmap_init(struct tegra_channel *chan)
+{
+	int index;
+
+	bitmap_zero(chan->tpg_fmts_bitmap, MAX_FORMAT_NUM);
+
+	index = tegra_core_get_idx_by_code(chan,
+					   MEDIA_BUS_FMT_SRGGB10_1X10, 0);
+	bitmap_set(chan->tpg_fmts_bitmap, index, 1);
+
+	index = tegra_core_get_idx_by_code(chan,
+					   MEDIA_BUS_FMT_RGB888_1X32_PADHI, 0);
+	bitmap_set(chan->tpg_fmts_bitmap, index, 1);
+}
+
+int tegra_vi_power_on(struct tegra_vi *vi)
+{
+	int ret;
+
+	ret = regulator_enable(vi->vi_reg);
+	if (ret)
+		return ret;
+
+	ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_VENC,
+						vi->vi_clk, vi->vi_rst);
+	if (ret) {
+		dev_err(vi->dev, "failed to power up!\n");
+		goto error_power_up;
+	}
+
+	ret = clk_set_rate(vi->vi_clk, vi->soc_data->vi_max_clk_hz);
+	if (ret) {
+		dev_err(vi->dev, "failed to set vi clk rate, err: %d\n", ret);
+		goto error_clk_set_rate;
+	}
+
+	ret = clk_prepare_enable(vi->vi_clk);
+	if (ret) {
+		dev_err(vi->dev, "failed to enable vi clk, err: %d\n", ret);
+		goto error_clk_set_rate;
+	}
+
+	return 0;
+
+error_clk_set_rate:
+	tegra_powergate_power_off(TEGRA_POWERGATE_VENC);
+
+error_power_up:
+	regulator_disable(vi->vi_reg);
+
+	return ret;
+}
+
+void tegra_vi_power_off(struct tegra_vi *vi)
+{
+	reset_control_assert(vi->vi_rst);
+	clk_disable_unprepare(vi->vi_clk);
+	tegra_powergate_power_off(TEGRA_POWERGATE_VENC);
+	regulator_disable(vi->vi_reg);
+}
+
+static int tegra_vi_tpg_channels_alloc(struct tegra_vi *vi)
+{
+	struct tegra_channel *chan;
+	unsigned int port_num;
+	const struct tegra_video_format *video_formats;
+	unsigned int nformats = vi->soc_data->nformats;
+	unsigned int nchannels = vi->soc_data->vi_max_channels;
+
+	video_formats = devm_kcalloc(vi->dev, nformats, sizeof(*video_formats),
+				     GFP_KERNEL);
+	if (!video_formats)
+		return -ENOMEM;
+
+	video_formats = vi->soc_data->video_formats;
+
+	for (port_num = 0; port_num < nchannels; port_num++) {
+		chan = devm_kzalloc(vi->dev, sizeof(*chan), GFP_KERNEL);
+		if (!chan)
+			return -ENOMEM;
+
+		list_add_tail(&chan->list, &vi->vi_chans);
+		chan->vi = vi;
+		chan->port = port_num;
+		chan->nformats = nformats;
+		chan->video_formats = video_formats;
+	}
+
+	return 0;
+}
+
+static int tegra_vi_channels_init(struct tegra_vi *vi)
+{
+	struct tegra_channel *chan;
+	int ret;
+
+	list_for_each_entry(chan, &vi->vi_chans, list) {
+		ret = tegra_channel_init(chan);
+		if (ret < 0) {
+			dev_err(vi->dev, "channel %d init failed\n",
+				chan->port);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int tegra_vi_channels_cleanup(struct tegra_vi *vi)
+{
+	struct tegra_channel *chan;
+
+	list_for_each_entry(chan, &vi->vi_chans, list)
+		tegra_channel_cleanup(chan);
+
+	return 0;
+}
+
+static int tegra_vi_tpg_graph_init(struct tegra_vi *vi)
+{
+	struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
+	struct tegra_csi_device *csi = cam->csi;
+	struct tegra_channel *vi_chan;
+	struct tegra_csi_channel *csi_chan;
+	u32 link_flags = MEDIA_LNK_FL_ENABLED;
+	int ret = 0;
+
+	csi_chan = list_first_entry(&csi->csi_chans, struct tegra_csi_channel,
+				    list);
+
+	list_for_each_entry(vi_chan, &vi->vi_chans, list) {
+		struct media_entity *source = &csi_chan->subdev.entity;
+		struct media_entity *sink = &vi_chan->video.entity;
+		struct media_pad *source_pad = csi_chan->pads;
+		struct media_pad *sink_pad = &vi_chan->pad;
+
+		ret = v4l2_device_register_subdev(&cam->v4l2_dev,
+						  &csi_chan->subdev);
+		if (ret) {
+			dev_err(vi->dev, "failed to register subdev: %d\n",
+				ret);
+			goto register_fail;
+		}
+
+		dev_dbg(vi->dev, "creating %s:%u -> %s:%u link\n",
+			source->name, source_pad->index,
+			sink->name, sink_pad->index);
+
+		ret = media_create_pad_link(source, source_pad->index,
+					    sink, sink_pad->index,
+					    link_flags);
+		if (ret < 0) {
+			dev_err(vi->dev,
+				"failed to create %s:%u -> %s:%u link\n",
+				source->name, source_pad->index,
+				sink->name, sink_pad->index);
+			goto register_fail;
+		}
+
+		vi_tpg_fmts_bitmap_init(vi_chan);
+		tegra_channel_setup_ctrl_handler(vi_chan);
+
+		csi_chan = list_next_entry(csi_chan, list);
+	}
+
+	return 0;
+
+register_fail:
+	list_for_each_entry(csi_chan, &csi->csi_chans, list)
+		v4l2_device_unregister_subdev(&csi_chan->subdev);
+
+	return ret;
+}
+
+static int tegra_vi_init(struct host1x_client *client)
+{
+	struct tegra_camera *cam = dev_get_drvdata(client->host);
+	struct tegra_vi *vi = host1x_client_to_vi(client);
+	int ret;
+
+	cam->vi = vi;
+
+	if (!cam->csi) {
+		dev_err(vi->dev, "csi host1x client is not initialized\n");
+		return -ENODEV;
+	}
+
+	INIT_LIST_HEAD(&vi->vi_chans);
+
+	/* Create all TPG channels */
+	ret = tegra_vi_tpg_channels_alloc(vi);
+	if (ret < 0)
+		return ret;
+
+	/* initialize Tegra VI channels */
+	ret = tegra_vi_channels_init(vi);
+	if (ret < 0)
+		return ret;
+
+	/* Setup media links between Tegra VI and CSI for TPG */
+	ret = tegra_vi_tpg_graph_init(vi);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int tegra_vi_exit(struct host1x_client *client)
+{
+	struct tegra_camera *cam = dev_get_drvdata(client->host);
+
+	if (cam->vi)
+		tegra_vi_channels_cleanup(cam->vi);
+
+	return 0;
+}
+
+static const struct host1x_client_ops vi_client_ops = {
+	.init = tegra_vi_init,
+	.exit = tegra_vi_exit,
+};
+
+static int tegra_vi_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct tegra_vi *vi;
+	int ret;
+
+	vi = devm_kzalloc(&pdev->dev, sizeof(*vi), GFP_KERNEL);
+	if (!vi)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	vi->iomem = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(vi->iomem))
+		return PTR_ERR(vi->iomem);
+
+	vi->soc_data = of_device_get_match_data(&pdev->dev);
+	if (!vi->soc_data) {
+		dev_info(&pdev->dev, "No platform data\n\n");
+		return -ENODATA;
+	}
+
+	vi->vi_rst = devm_reset_control_get(&pdev->dev, "vi");
+	if (IS_ERR(vi->vi_rst)) {
+		dev_err(&pdev->dev, "Failed to get vi reset\n");
+		return PTR_ERR(vi->vi_rst);
+	}
+
+	vi->vi_clk = devm_clk_get(&pdev->dev, "vi");
+	if (IS_ERR(vi->vi_clk)) {
+		dev_err(&pdev->dev, "Failed to get vi clock\n");
+		return PTR_ERR(vi->vi_clk);
+	}
+
+	vi->vi_reg = devm_regulator_get(&pdev->dev, "avdd-dsi-csi");
+	if (IS_ERR(vi->vi_reg)) {
+		dev_err(&pdev->dev, "Failed to get avdd-dsi-csi regulators\n");
+		return -EPROBE_DEFER;
+	}
+
+	vi->dev = &pdev->dev;
+	vi->fops = vi->soc_data->vi_fops;
+	platform_set_drvdata(pdev, vi);
+
+	/* initialize host1x interface */
+	INIT_LIST_HEAD(&vi->client.list);
+	vi->client.ops = &vi_client_ops;
+	vi->client.dev = &pdev->dev;
+
+	ret = host1x_client_register(&vi->client);
+	if (ret < 0) {
+		dev_err(vi->dev, "failed to register host1x client: %d\n",
+			ret);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int tegra_vi_remove(struct platform_device *pdev)
+{
+	struct tegra_vi *vi = platform_get_drvdata(pdev);
+
+	host1x_client_unregister(&vi->client);
+
+	return 0;
+}
+
+static const struct vi_tegra_soc_data tegra210_vi_data = {
+	.video_formats = vi2_video_formats,
+	.nformats = ARRAY_SIZE(vi2_video_formats),
+	.vi_fops = &vi2_fops,
+	.vi_max_clk_hz = TEGRA210_CLOCK_VI_MAX,
+	.vi_max_channels = TEGRA210_MAX_CHANNELS,
+};
+
+static const struct of_device_id tegra_vi_of_id_table[] = {
+	{ .compatible = "nvidia,tegra210-vi", .data = &tegra210_vi_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tegra_vi_of_id_table);
+
+struct platform_driver tegra_vi_driver = {
+	.driver = {
+		.name = "tegra-vi",
+		.of_match_table = tegra_vi_of_id_table,
+	},
+	.probe = tegra_vi_probe,
+	.remove = tegra_vi_remove,
+};
+
+MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra Video Input Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/media/tegra/tegra-vi.h b/drivers/staging/media/tegra/tegra-vi.h
new file mode 100644
index 000000000000..62973cb62624
--- /dev/null
+++ b/drivers/staging/media/tegra/tegra-vi.h
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __TEGRA_VI_H__
+#define __TEGRA_VI_H__
+
+#include <linux/host1x.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/videodev2.h>
+
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf2-v4l2.h>
+
+#include "mc_common.h"
+
+enum tegra_vi_pg_mode {
+	TEGRA_VI_PG_DISABLED = 0,
+	TEGRA_VI_PG_DIRECT,
+	TEGRA_VI_PG_PATCH,
+};
+
+/**
+ * struct tegra_channel_buffer - video channel buffer
+ * @buf: vb2 buffer base object
+ * @queue: buffer list entry in the channel queued buffers list
+ * @chan: channel that uses the buffer
+ * @addr: Tegra IOVA buffer address for VI output
+ */
+struct tegra_channel_buffer {
+	struct tegra_channel *chan;
+	struct vb2_v4l2_buffer buf;
+	struct list_head queue;
+	dma_addr_t addr;
+};
+
+#define to_tegra_channel_buffer(vb) \
+	container_of(vb, struct tegra_channel_buffer, buf)
+
+struct tegra_vi_fops {
+	void (*vi_stride_align)(unsigned int *bpl);
+	int (*vi_start_streaming)(struct vb2_queue *vq, u32 count);
+	void (*vi_stop_streaming)(struct vb2_queue *vq);
+};
+
+struct vi_tegra_soc_data {
+	const struct tegra_video_format *video_formats;
+	unsigned int nformats;
+	const struct tegra_vi_fops *vi_fops;
+	unsigned int vi_max_clk_hz;
+	unsigned int vi_max_channels;
+};
+
+/**
+ * struct tegra_vi - NVIDIA Tegra Video Input device structure
+ * @dev: device struct
+ * @client: host1x_client struct
+ *
+ * @iomem: register base
+ * @vi_clk: main clock for VI block
+ * @vi_rst: reset controller
+ * @vi_reg: regulator for VI hardware, normally it avdd_dsi_csi
+ * @power_on_refcnt: reference count for power on/off operations
+ *
+ * @soc_data: pointer to SoC data structure
+ * @fops: vi operations
+ *
+ * @channels: list of channels at the pipeline output and input
+ *
+ * @pg_mode: test pattern generator mode (disabled/direct/patch)
+ */
+struct tegra_vi {
+	struct device *dev;
+	struct host1x_client client;
+
+	void __iomem *iomem;
+	struct clk *vi_clk;
+	struct reset_control *vi_rst;
+	struct regulator *vi_reg;
+	atomic_t power_on_refcnt;
+
+	const struct vi_tegra_soc_data *soc_data;
+	const struct tegra_vi_fops *fops;
+
+	struct list_head vi_chans;
+
+	enum tegra_vi_pg_mode pg_mode;
+};
+
+int tegra_vi_power_on(struct tegra_vi *vi);
+void tegra_vi_power_off(struct tegra_vi *vi);
+
+#endif /* __TEGRA_VI_H__ */
diff --git a/drivers/staging/media/tegra/vi2_fops.c b/drivers/staging/media/tegra/vi2_fops.c
new file mode 100644
index 000000000000..a12a662ceec6
--- /dev/null
+++ b/drivers/staging/media/tegra/vi2_fops.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __VI2_H__
+#define __VI2_H__
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/freezer.h>
+
+#include "vi2_registers.h"
+#include "vi2_formats.h"
+#include "mc_common.h"
+#include "vi2_fops.h"
+#include "tegra-vi.h"
+
+static void tegra_channel_write(struct tegra_channel *chan,
+				unsigned int addr, u32 val)
+{
+	writel(val, chan->vi->iomem + addr);
+}
+
+static u32 tegra_channel_read(struct tegra_channel *chan,
+			      unsigned int addr)
+{
+	return readl(chan->vi->iomem + addr);
+}
+
+/* VI CSI registers accessors */
+static void csi_write(struct tegra_channel *chan, unsigned int addr, u32 val)
+{
+	void __iomem *vi_csi_base;
+
+	vi_csi_base = chan->vi->iomem + TEGRA_VI_CSI_BASE(chan->port);
+	writel(val, vi_csi_base + addr);
+}
+
+static u32 csi_read(struct tegra_channel *chan, unsigned int addr)
+{
+	void __iomem *vi_csi_base;
+
+	vi_csi_base = chan->vi->iomem + TEGRA_VI_CSI_BASE(chan->port);
+
+	return readl(vi_csi_base + addr);
+}
+
+/*
+ * Tegra channel frame setup and capture operations
+ */
+static int tegra_channel_capture_setup(struct tegra_channel *chan)
+{
+	u32 height = chan->format.height;
+	u32 width = chan->format.width;
+	u32 format = chan->fmtinfo->img_fmt;
+	u32 data_type = chan->fmtinfo->img_dt;
+	u32 word_count = tegra_core_get_word_count(width, chan->fmtinfo);
+
+	csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, 0xFFFFFFFF);
+	csi_write(chan, TEGRA_VI_CSI_IMAGE_DEF,
+		  ((chan->vi->pg_mode ? 0 : 1) << BYPASS_PXL_TRANSFORM_OFFSET) |
+		  (format << IMAGE_DEF_FORMAT_OFFSET) |
+		  IMAGE_DEF_DEST_MEM);
+	csi_write(chan, TEGRA_VI_CSI_IMAGE_DT, data_type);
+	csi_write(chan, TEGRA_VI_CSI_IMAGE_SIZE_WC, word_count);
+	csi_write(chan, TEGRA_VI_CSI_IMAGE_SIZE,
+		  (height << IMAGE_SIZE_HEIGHT_OFFSET) | width);
+
+	return 0;
+}
+
+static void tegra_channel_capture_error_status(struct tegra_channel *chan)
+{
+	u32 val;
+
+	val = csi_read(chan, TEGRA_VI_CSI_ERROR_STATUS);
+	dev_err(&chan->video.dev, "TEGRA_VI_CSI_ERROR_STATUS 0x%08x\n", val);
+	csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, val);
+
+	val = tegra_channel_read(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR);
+	dev_err(&chan->video.dev, "TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR 0x%08x\n",
+		val);
+	tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR, val);
+	tegra_channel_csi_error_status(chan);
+}
+
+static int tegra_channel_capture_frame(struct tegra_channel *chan,
+				       struct tegra_channel_buffer *buf)
+{
+	int err = 0;
+	u32 thresh, value, frame_start;
+	int bytes_per_line = chan->format.bytesperline;
+
+	/* program buffer address by using surface 0 */
+	csi_write(chan, TEGRA_VI_CSI_SURFACE0_OFFSET_MSB, 0x0);
+	csi_write(chan, TEGRA_VI_CSI_SURFACE0_OFFSET_LSB, buf->addr);
+	csi_write(chan, TEGRA_VI_CSI_SURFACE0_STRIDE, bytes_per_line);
+
+	/* increase syncpoint max */
+	thresh = host1x_syncpt_incr_max(chan->sp, 1);
+
+	/* program syncpoint */
+	frame_start = VI_CSI_PP_FRAME_START(chan->port);
+	value = VI_CFG_VI_INCR_SYNCPT_COND(frame_start) |
+		host1x_syncpt_id(chan->sp);
+	tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT, value);
+
+	csi_write(chan, TEGRA_VI_CSI_SINGLE_SHOT, SINGLE_SHOT_CAPTURE);
+
+	/* move buffer to capture done queue */
+	spin_lock(&chan->done_lock);
+	list_add_tail(&buf->queue, &chan->done);
+	spin_unlock(&chan->done_lock);
+
+	/* wait up kthread for capture done */
+	wake_up_interruptible(&chan->done_wait);
+
+	/* use syncpoint to wake up */
+	err = host1x_syncpt_wait(chan->sp, thresh,
+				 TEGRA_VI_SYNCPT_WAIT_TIMEOUT, &value);
+	if (err) {
+		dev_err(&chan->video.dev,
+			"frame start syncpt timeout, err: %d\n", err);
+		tegra_channel_capture_error_status(chan);
+	}
+
+	return err;
+}
+
+static int tegra_channel_capture_done(struct tegra_channel *chan,
+				      struct tegra_channel_buffer *buf)
+{
+	struct vb2_v4l2_buffer *vb = &buf->buf;
+	u32 thresh, value, mw_ack_done;
+	int ret = 0;
+
+	/* increase syncpoint max */
+	thresh = host1x_syncpt_incr_max(chan->sp, 1);
+
+	/* program syncpoint */
+	mw_ack_done = VI_CSI_MW_ACK_DONE(chan->port);
+	value = VI_CFG_VI_INCR_SYNCPT_COND(mw_ack_done) |
+		host1x_syncpt_id(chan->sp);
+	tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT, value);
+
+	if (!csi_read(chan, TEGRA_VI_CSI_SINGLE_SHOT))
+		csi_write(chan, TEGRA_VI_CSI_SINGLE_SHOT, SINGLE_SHOT_CAPTURE);
+
+	/* use syncpoint to wake up */
+	ret = host1x_syncpt_wait(chan->sp, thresh,
+				 TEGRA_VI_SYNCPT_WAIT_TIMEOUT, &value);
+	if (ret)
+		dev_err(&chan->video.dev,
+			"MW_ACK_DONE syncpoint timeout, err: %d\n", ret);
+
+	/* captured one frame */
+	vb->sequence = chan->sequence++;
+	vb->field = V4L2_FIELD_NONE;
+	vb->vb2_buf.timestamp = ktime_get_ns();
+	vb2_buffer_done(&vb->vb2_buf,
+			ret < 0 ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+
+	return ret;
+}
+
+static int chan_capture_kthread_start(void *data)
+{
+	struct tegra_channel *chan = data;
+	struct tegra_channel_buffer *buf;
+
+	set_freezable();
+
+	while (1) {
+		try_to_freeze();
+
+		wait_event_interruptible(chan->start_wait,
+					 !list_empty(&chan->capture) ||
+					 kthread_should_stop());
+		if (kthread_should_stop())
+			break;
+
+		spin_lock(&chan->start_lock);
+		if (list_empty(&chan->capture)) {
+			spin_unlock(&chan->start_lock);
+			continue;
+		}
+
+		buf = list_entry(chan->capture.next,
+				 struct tegra_channel_buffer, queue);
+		list_del_init(&buf->queue);
+		spin_unlock(&chan->start_lock);
+		tegra_channel_capture_frame(chan, buf);
+	}
+
+	return 0;
+}
+
+static int chan_capture_kthread_done(void *data)
+{
+	struct tegra_channel *chan = data;
+	struct tegra_channel_buffer *buf;
+
+	set_freezable();
+
+	while (1) {
+		try_to_freeze();
+
+		wait_event_interruptible(chan->done_wait,
+					 !list_empty(&chan->done) ||
+					 kthread_should_stop());
+
+		if (kthread_should_stop())
+			break;
+
+		spin_lock(&chan->done_lock);
+		if (list_empty(&chan->done)) {
+			spin_unlock(&chan->done_lock);
+			continue;
+		}
+
+		buf = list_entry(chan->done.next, struct tegra_channel_buffer,
+				 queue);
+		list_del_init(&buf->queue);
+		spin_unlock(&chan->done_lock);
+		tegra_channel_capture_done(chan, buf);
+	}
+
+	return 0;
+}
+
+static void vi2_stride_align(unsigned int *bpl)
+{
+	*bpl = ((*bpl + (TEGRA210_SURFACE_ALIGNMENT) - 1) &
+			~((TEGRA210_SURFACE_ALIGNMENT) - 1));
+}
+
+static int vi2_channel_start_streaming(struct vb2_queue *vq, u32 count)
+{
+	struct tegra_channel *chan = vb2_get_drv_priv(vq);
+	struct media_pipeline *pipe = &chan->video.pipe;
+	int ret = 0;
+
+	/* turn on the power on first open */
+	if (atomic_add_return(1, &chan->vi->power_on_refcnt) == 1) {
+		ret = tegra_vi_power_on(chan->vi);
+		if (ret < 0)
+			goto error_vi_power_on;
+
+		usleep_range(5, 100);
+		tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL,
+				    VI_CG_2ND_LEVEL_EN);
+		usleep_range(10, 15);
+	}
+
+	/* clean up status */
+	csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, 0xFFFFFFFF);
+
+	/*
+	 * Sync point FIFO full stalls the host interface.
+	 * Setting NO_STALL will drop INCR_SYNCPT methods when fifos are
+	 * full and corresponding condition bits in INCR_SYNCPT_ERROR
+	 * register will be set.
+	 * This allows SW to process error recovery.
+	 */
+	tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_CNTRL,
+			    TEGRA_VI_CFG_VI_INCR_SYNCPT_NO_STALL);
+
+	ret = media_pipeline_start(&chan->video.entity, pipe);
+	if (ret < 0)
+		goto error_pipeline_start;
+
+	/* start the pipeline */
+	ret = tegra_channel_set_stream(chan, true);
+	if (ret < 0)
+		goto error_set_stream;
+
+	/* program VI registers after TPG, sensors and CSI streaming */
+	ret = tegra_channel_capture_setup(chan);
+	if (ret < 0)
+		goto error_capture_setup;
+
+	chan->sequence = 0;
+
+	/* start kthread to capture data to buffer */
+	chan->kthread_capture_start = kthread_run(chan_capture_kthread_start,
+						  chan, "%s:0",
+						  chan->video.name);
+	if (IS_ERR(chan->kthread_capture_start)) {
+		dev_err(&chan->video.dev,
+			"failed to run kthread for capture start!\n");
+		ret = PTR_ERR(chan->kthread_capture_start);
+		goto error_capture_setup;
+	}
+
+	chan->kthread_capture_done = kthread_run(chan_capture_kthread_done,
+						 chan, "%s:1",
+						 chan->video.name);
+	if (IS_ERR(chan->kthread_capture_done)) {
+		dev_err(&chan->video.dev,
+			"failed to run kthread for capture done!\n");
+		ret = PTR_ERR(chan->kthread_capture_done);
+		goto error_capture_setup;
+	}
+
+	return 0;
+
+error_capture_setup:
+	tegra_channel_set_stream(chan, false);
+
+error_set_stream:
+	media_pipeline_stop(&chan->video.entity);
+
+error_pipeline_start:
+	tegra_channel_queued_buf_done(chan, VB2_BUF_STATE_QUEUED);
+
+error_vi_power_on:
+	if (atomic_dec_and_test(&chan->vi->power_on_refcnt))
+		tegra_vi_power_off(chan->vi);
+
+	return ret;
+}
+
+static void vi2_channel_stop_streaming(struct vb2_queue *vq)
+{
+	struct tegra_channel *chan = vb2_get_drv_priv(vq);
+
+	/* stop the kthread for capture */
+	kthread_stop(chan->kthread_capture_start);
+	chan->kthread_capture_start = NULL;
+	kthread_stop(chan->kthread_capture_done);
+	chan->kthread_capture_done = NULL;
+
+	/* disable clock gating to enable continuous clock */
+	tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL, 0);
+
+	/* clear single shot if armed at close */
+	if (csi_read(chan, TEGRA_VI_CSI_SINGLE_SHOT)) {
+		csi_write(chan, TEGRA_VI_CSI_SW_RESET, 0xF);
+		csi_write(chan, TEGRA_VI_CSI_SW_RESET, 0x0);
+	}
+
+	/* enable clock gating so VI can be clock gated if necessary */
+	tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL, VI_CG_2ND_LEVEL_EN);
+
+	tegra_channel_set_stream(chan, false);
+
+	media_pipeline_stop(&chan->video.entity);
+
+	/* turn off power on the last release */
+	if (atomic_dec_and_test(&chan->vi->power_on_refcnt))
+		tegra_vi_power_off(chan->vi);
+
+	tegra_channel_queued_buf_done(chan, VB2_BUF_STATE_ERROR);
+}
+
+const struct tegra_vi_fops vi2_fops = {
+	.vi_stride_align = vi2_stride_align,
+	.vi_start_streaming = vi2_channel_start_streaming,
+	.vi_stop_streaming = vi2_channel_stop_streaming,
+};
+EXPORT_SYMBOL(vi2_fops);
+
+#endif
diff --git a/drivers/staging/media/tegra/vi2_fops.h b/drivers/staging/media/tegra/vi2_fops.h
new file mode 100644
index 000000000000..dcbd3ad4b642
--- /dev/null
+++ b/drivers/staging/media/tegra/vi2_fops.h
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __T210_VI_H__
+#define __T210_VI_H__
+
+#define	TEGRA210_CLOCK_VI_MAX			460000000
+
+#define	TEGRA_VI_CSI_BASE(x)			(0x100 + (x) * 0x100)
+
+extern const struct tegra_vi_fops vi2_fops;
+
+#endif
diff --git a/drivers/staging/media/tegra/vi2_formats.h b/drivers/staging/media/tegra/vi2_formats.h
new file mode 100644
index 000000000000..416960b1c1f2
--- /dev/null
+++ b/drivers/staging/media/tegra/vi2_formats.h
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __VI2_FORMATS_H_
+#define __VI2_FORMATS_H_
+
+#include "tegra-core.h"
+
+/*
+ * These go into the TEGRA_VI_CSI_n_IMAGE_DEF registers bits 23:16
+ * Output pixel memory format for the VI channel.
+ */
+enum tegra_image_format {
+	TEGRA_IMAGE_FORMAT_T_L8 = 16,
+
+	TEGRA_IMAGE_FORMAT_T_R16_I = 32,
+	TEGRA_IMAGE_FORMAT_T_B5G6R5,
+	TEGRA_IMAGE_FORMAT_T_R5G6B5,
+	TEGRA_IMAGE_FORMAT_T_A1B5G5R5,
+	TEGRA_IMAGE_FORMAT_T_A1R5G5B5,
+	TEGRA_IMAGE_FORMAT_T_B5G5R5A1,
+	TEGRA_IMAGE_FORMAT_T_R5G5B5A1,
+	TEGRA_IMAGE_FORMAT_T_A4B4G4R4,
+	TEGRA_IMAGE_FORMAT_T_A4R4G4B4,
+	TEGRA_IMAGE_FORMAT_T_B4G4R4A4,
+	TEGRA_IMAGE_FORMAT_T_R4G4B4A4,
+
+	TEGRA_IMAGE_FORMAT_T_A8B8G8R8 = 64,
+	TEGRA_IMAGE_FORMAT_T_A8R8G8B8,
+	TEGRA_IMAGE_FORMAT_T_B8G8R8A8,
+	TEGRA_IMAGE_FORMAT_T_R8G8B8A8,
+	TEGRA_IMAGE_FORMAT_T_A2B10G10R10,
+	TEGRA_IMAGE_FORMAT_T_A2R10G10B10,
+	TEGRA_IMAGE_FORMAT_T_B10G10R10A2,
+	TEGRA_IMAGE_FORMAT_T_R10G10B10A2,
+
+	TEGRA_IMAGE_FORMAT_T_A8Y8U8V8 = 193,
+	TEGRA_IMAGE_FORMAT_T_V8U8Y8A8,
+
+	TEGRA_IMAGE_FORMAT_T_A2Y10U10V10 = 197,
+	TEGRA_IMAGE_FORMAT_T_V10U10Y10A2,
+	TEGRA_IMAGE_FORMAT_T_Y8_U8__Y8_V8,
+	TEGRA_IMAGE_FORMAT_T_Y8_V8__Y8_U8,
+	TEGRA_IMAGE_FORMAT_T_U8_Y8__V8_Y8,
+	TEGRA_IMAGE_FORMAT_T_V8_Y8__U8_Y8,
+
+	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N444 = 224,
+	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N444,
+	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N444,
+	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N422,
+	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N422,
+	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N422,
+	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N420,
+	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N420,
+	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N420,
+	TEGRA_IMAGE_FORMAT_T_X2LC10LB10LA10,
+	TEGRA_IMAGE_FORMAT_T_A2R6R6R6R6R6,
+};
+
+static const struct tegra_video_format vi2_video_formats[] = {
+	/* RAW 8 */
+	TEGRA_VIDEO_FORMAT(RAW8, 8, SRGGB8_1X8, 1, 1, T_L8,
+			   RAW8, SRGGB8, "RGRG.. GBGB.."),
+	TEGRA_VIDEO_FORMAT(RAW8, 8, SGRBG8_1X8, 1, 1, T_L8,
+			   RAW8, SGRBG8, "GRGR.. BGBG.."),
+	TEGRA_VIDEO_FORMAT(RAW8, 8, SGBRG8_1X8, 1, 1, T_L8,
+			   RAW8, SGBRG8, "GBGB.. RGRG.."),
+	TEGRA_VIDEO_FORMAT(RAW8, 8, SBGGR8_1X8, 1, 1, T_L8,
+			   RAW8, SBGGR8, "BGBG.. GRGR.."),
+
+	/* RAW 10 */
+	TEGRA_VIDEO_FORMAT(RAW10, 10, SRGGB10_1X10, 2, 1, T_R16_I,
+			   RAW10, SRGGB10, "RGRG.. GBGB.."),
+	TEGRA_VIDEO_FORMAT(RAW10, 10, SGRBG10_1X10, 2, 1, T_R16_I,
+			   RAW10, SGRBG10, "GRGR.. BGBG.."),
+	TEGRA_VIDEO_FORMAT(RAW10, 10, SGBRG10_1X10, 2, 1, T_R16_I,
+			   RAW10, SGBRG10, "GBGB.. RGRG.."),
+	TEGRA_VIDEO_FORMAT(RAW10, 10, SBGGR10_1X10, 2, 1, T_R16_I,
+			   RAW10, SBGGR10, "BGBG.. GRGR.."),
+
+	/* RAW 12 */
+	TEGRA_VIDEO_FORMAT(RAW12, 12, SRGGB12_1X12, 2, 1, T_R16_I,
+			   RAW12, SRGGB12, "RGRG.. GBGB.."),
+	TEGRA_VIDEO_FORMAT(RAW12, 12, SGRBG12_1X12, 2, 1, T_R16_I,
+			   RAW12, SGRBG12, "GRGR.. BGBG.."),
+	TEGRA_VIDEO_FORMAT(RAW12, 12, SGBRG12_1X12, 2, 1, T_R16_I,
+			   RAW12, SGBRG12, "GBGB.. RGRG.."),
+	TEGRA_VIDEO_FORMAT(RAW12, 12, SBGGR12_1X12, 2, 1, T_R16_I,
+			   RAW12, SBGGR12, "BGBG.. GRGR.."),
+
+	/* RGB888 */
+	TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X24, 4, 1, T_A8R8G8B8,
+			   RGB888, ABGR32, "BGRA-8-8-8-8"),
+	TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X32_PADHI, 4, 1, T_A8B8G8R8,
+			   RGB888, RGB32, "RGB-8-8-8-8"),
+
+	/* YUV422 */
+	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 2, 1, T_U8_Y8__V8_Y8,
+			   YUV422_8, UYVY, "YUV 4:2:2"),
+	TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_1X16, 2, 1, T_V8_Y8__U8_Y8,
+			   YUV422_8, VYUY, "YUV 4:2:2"),
+	TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_1X16, 2, 1, T_Y8_U8__Y8_V8,
+			   YUV422_8, YUYV, "YUV 4:2:2"),
+	TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_1X16, 2, 1, T_Y8_V8__Y8_U8,
+			   YUV422_8, YVYU, "YUV 4:2:2"),
+	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 1, 1, T_Y8__V8U8_N422,
+			   YUV422_8, NV16, "NV16"),
+	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_2X8, 2, 1, T_U8_Y8__V8_Y8,
+			   YUV422_8, UYVY, "YUV 4:2:2 UYVY"),
+	TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_2X8, 2, 1, T_V8_Y8__U8_Y8,
+			   YUV422_8, VYUY, "YUV 4:2:2 VYUY"),
+	TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_2X8, 2, 1, T_Y8_U8__Y8_V8,
+			   YUV422_8, YUYV, "YUV 4:2:2 YUYV"),
+	TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_2X8, 2, 1, T_Y8_V8__Y8_U8,
+			   YUV422_8, YVYU, "YUV 4:2:2 YVYU"),
+};
+#endif
diff --git a/drivers/staging/media/tegra/vi2_registers.h b/drivers/staging/media/tegra/vi2_registers.h
new file mode 100644
index 000000000000..c54a6a3aa1c4
--- /dev/null
+++ b/drivers/staging/media/tegra/vi2_registers.h
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __REGISTERS_H__
+#define __REGISTERS_H__
+
+#define	TEGRA_CLOCK_VI_MAX				793600000
+#define	TEGRA210_SURFACE_ALIGNMENT			64
+#define TEGRA210_MAX_CHANNELS				6
+
+/* Tegra210 VI registers */
+#define	TEGRA_VI_SYNCPT_WAIT_TIMEOUT			200
+#define	TEGRA_VI_CFG_VI_INCR_SYNCPT			0x000
+#define   VI_CFG_VI_INCR_SYNCPT_COND(x)			(((x) & 0xff) << 8)
+#define	  VI_CSI_PP_LINE_START(port)			(4 + (port) * 4)
+#define	  VI_CSI_PP_FRAME_START(port)			(5 + (port) * 4)
+#define	  VI_CSI_MW_REQ_DONE(port)			(6 + (port) * 4)
+#define	  VI_CSI_MW_ACK_DONE(port)			(7 + (port) * 4)
+
+#define	TEGRA_VI_CFG_VI_INCR_SYNCPT_CNTRL		0x004
+#define	  TEGRA_VI_CFG_VI_INCR_SYNCPT_NO_STALL		BIT(8)
+#define	TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR		0x008
+#define	TEGRA_VI_CFG_CTXSW				0x020
+#define	TEGRA_VI_CFG_INTSTATUS				0x024
+#define	TEGRA_VI_CFG_PWM_CONTROL			0x038
+#define	TEGRA_VI_CFG_PWM_HIGH_PULSE			0x03c
+#define	TEGRA_VI_CFG_PWM_LOW_PULSE			0x040
+#define	TEGRA_VI_CFG_PWM_SELECT_PULSE_A			0x044
+#define	TEGRA_VI_CFG_PWM_SELECT_PULSE_B			0x048
+#define	TEGRA_VI_CFG_PWM_SELECT_PULSE_C			0x04c
+#define	TEGRA_VI_CFG_PWM_SELECT_PULSE_D			0x050
+#define	TEGRA_VI_CFG_VGP1				0x064
+#define	TEGRA_VI_CFG_VGP2				0x068
+#define	TEGRA_VI_CFG_VGP3				0x06c
+#define	TEGRA_VI_CFG_VGP4				0x070
+#define	TEGRA_VI_CFG_VGP5				0x074
+#define	TEGRA_VI_CFG_VGP6				0x078
+#define	TEGRA_VI_CFG_INTERRUPT_MASK			0x08c
+#define	TEGRA_VI_CFG_INTERRUPT_TYPE_SELECT		0x090
+#define	TEGRA_VI_CFG_INTERRUPT_POLARITY_SELECT		0x094
+#define	TEGRA_VI_CFG_INTERRUPT_STATUS			0x098
+#define	TEGRA_VI_CFG_VGP_SYNCPT_CONFIG			0x0ac
+#define	TEGRA_VI_CFG_VI_SW_RESET			0x0b4
+#define	TEGRA_VI_CFG_CG_CTRL				0x0b8
+#define   VI_CG_2ND_LEVEL_EN				0x1
+#define	TEGRA_VI_CFG_VI_MCCIF_FIFOCTRL			0x0e4
+#define	TEGRA_VI_CFG_TIMEOUT_WCOAL_VI			0x0e8
+#define	TEGRA_VI_CFG_DVFS				0x0f0
+#define	TEGRA_VI_CFG_RESERVE				0x0f4
+#define	TEGRA_VI_CFG_RESERVE_1				0x0f8
+
+/* Tegra210 CSI registers */
+#define TEGRA_VI_CSI_SW_RESET				0x000
+#define TEGRA_VI_CSI_SINGLE_SHOT			0x004
+#define   SINGLE_SHOT_CAPTURE				0x1
+#define TEGRA_VI_CSI_SINGLE_SHOT_STATE_UPDATE		0x008
+#define TEGRA_VI_CSI_IMAGE_DEF				0x00c
+#define   BYPASS_PXL_TRANSFORM_OFFSET			24
+#define   IMAGE_DEF_FORMAT_OFFSET			16
+#define   IMAGE_DEF_DEST_MEM				0x1
+#define TEGRA_VI_CSI_RGB2Y_CTRL				0x010
+#define TEGRA_VI_CSI_MEM_TILING				0x014
+#define TEGRA_VI_CSI_IMAGE_SIZE				0x018
+#define   IMAGE_SIZE_HEIGHT_OFFSET			16
+#define TEGRA_VI_CSI_IMAGE_SIZE_WC			0x01c
+#define TEGRA_VI_CSI_IMAGE_DT				0x020
+#define TEGRA_VI_CSI_SURFACE0_OFFSET_MSB		0x024
+#define TEGRA_VI_CSI_SURFACE0_OFFSET_LSB		0x028
+#define TEGRA_VI_CSI_SURFACE1_OFFSET_MSB		0x02c
+#define TEGRA_VI_CSI_SURFACE1_OFFSET_LSB		0x030
+#define TEGRA_VI_CSI_SURFACE2_OFFSET_MSB		0x034
+#define TEGRA_VI_CSI_SURFACE2_OFFSET_LSB		0x038
+#define TEGRA_VI_CSI_SURFACE0_BF_OFFSET_MSB		0x03c
+#define TEGRA_VI_CSI_SURFACE0_BF_OFFSET_LSB		0x040
+#define TEGRA_VI_CSI_SURFACE1_BF_OFFSET_MSB		0x044
+#define TEGRA_VI_CSI_SURFACE1_BF_OFFSET_LSB		0x048
+#define TEGRA_VI_CSI_SURFACE2_BF_OFFSET_MSB		0x04c
+#define TEGRA_VI_CSI_SURFACE2_BF_OFFSET_LSB		0x050
+#define TEGRA_VI_CSI_SURFACE0_STRIDE			0x054
+#define TEGRA_VI_CSI_SURFACE1_STRIDE			0x058
+#define TEGRA_VI_CSI_SURFACE2_STRIDE			0x05c
+#define TEGRA_VI_CSI_SURFACE_HEIGHT0			0x060
+#define TEGRA_VI_CSI_ISPINTF_CONFIG			0x064
+#define TEGRA_VI_CSI_ERROR_STATUS			0x084
+#define TEGRA_VI_CSI_ERROR_INT_MASK			0x088
+#define TEGRA_VI_CSI_WD_CTRL				0x08c
+#define TEGRA_VI_CSI_WD_PERIOD				0x090
+
+/* Tegra210 CSI Pixel Parser registers: Starts from 0x838, offset 0x0 */
+#define TEGRA_CSI_INPUT_STREAM_CONTROL                  0x000
+#define   CSI_SKIP_PACKET_THRESHOLD_OFFSET		16
+
+#define TEGRA_CSI_PIXEL_STREAM_CONTROL0			0x004
+#define   CSI_PP_PACKET_HEADER_SENT			(0x1 << 4)
+#define   CSI_PP_DATA_IDENTIFIER_ENABLE			(0x1 << 5)
+#define   CSI_PP_WORD_COUNT_SELECT_HEADER		(0x1 << 6)
+#define   CSI_PP_CRC_CHECK_ENABLE			(0x1 << 7)
+#define   CSI_PP_WC_CHECK				(0x1 << 8)
+#define   CSI_PP_OUTPUT_FORMAT_STORE			(0x3 << 16)
+#define   CSI_PP_HEADER_EC_DISABLE			(0x1 << 27)
+#define   CSI_PPA_PAD_FRAME_NOPAD			(0x2 << 28)
+
+#define TEGRA_CSI_PIXEL_STREAM_CONTROL1                 0x008
+#define   CSI_PP_TOP_FIELD_FRAME_OFFSET			0
+#define   CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET		4
+
+#define TEGRA_CSI_PIXEL_STREAM_GAP                      0x00c
+#define   PP_FRAME_MIN_GAP_OFFSET			16
+
+#define TEGRA_CSI_PIXEL_STREAM_PP_COMMAND               0x010
+#define   CSI_PP_ENABLE					0x1
+#define   CSI_PP_DISABLE				0x2
+#define   CSI_PP_RST					0x3
+#define   CSI_PP_SINGLE_SHOT_ENABLE			(0x1 << 2)
+#define   CSI_PP_START_MARKER_FRAME_MAX_OFFSET		12
+
+#define TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME           0x014
+#define TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK           0x018
+#define TEGRA_CSI_PIXEL_PARSER_STATUS                   0x01c
+#define TEGRA_CSI_CSI_SW_SENSOR_RESET                   0x020
+
+/* Tegra210 CSI PHY registers */
+/* CSI_PHY_CIL_COMMAND_0 offset 0x0d0 from TEGRA_CSI_PIXEL_PARSER_0_BASE */
+#define TEGRA_CSI_PHY_CIL_COMMAND                       0x0d0
+#define   CSI_A_PHY_CIL_NOP				0x0
+#define   CSI_A_PHY_CIL_ENABLE				0x1
+#define   CSI_A_PHY_CIL_DISABLE				0x2
+#define   CSI_A_PHY_CIL_ENABLE_MASK			0x3
+#define   CSI_B_PHY_CIL_NOP				(0x0 << 8)
+#define   CSI_B_PHY_CIL_ENABLE				(0x1 << 8)
+#define   CSI_B_PHY_CIL_DISABLE				(0x2 << 8)
+#define   CSI_B_PHY_CIL_ENABLE_MASK			(0x3 << 8)
+
+#define TEGRA_CSI_CIL_PAD_CONFIG0                       0x000
+#define   BRICK_CLOCK_A_4X				(0x1 << 16)
+#define   BRICK_CLOCK_B_4X				(0x2 << 16)
+#define TEGRA_CSI_CIL_PAD_CONFIG1                       0x004
+#define TEGRA_CSI_CIL_PHY_CONTROL                       0x008
+#define TEGRA_CSI_CIL_INTERRUPT_MASK                    0x00c
+#define TEGRA_CSI_CIL_STATUS                            0x010
+#define TEGRA_CSI_CILX_STATUS                           0x014
+#define TEGRA_CSI_CIL_ESCAPE_MODE_COMMAND               0x018
+#define TEGRA_CSI_CIL_ESCAPE_MODE_DATA                  0x01c
+#define TEGRA_CSI_CIL_SW_SENSOR_RESET                   0x020
+
+#define TEGRA_CSI_PATTERN_GENERATOR_CTRL		0x000
+#define   PG_MODE_OFFSET				2
+#define   PG_ENABLE					0x1
+#define   PG_DISABLE					0x0
+
+#define PG_VBLANK_OFFSET				16
+#define TEGRA_CSI_PG_BLANK				0x004
+#define TEGRA_CSI_PG_PHASE				0x008
+#define TEGRA_CSI_PG_RED_FREQ				0x00c
+#define   PG_RED_VERT_INIT_FREQ_OFFSET			16
+#define   PG_RED_HOR_INIT_FREQ_OFFSET			0
+
+#define TEGRA_CSI_PG_RED_FREQ_RATE			0x010
+#define TEGRA_CSI_PG_GREEN_FREQ				0x014
+#define   PG_GREEN_VERT_INIT_FREQ_OFFSET		16
+#define   PG_GREEN_HOR_INIT_FREQ_OFFSET			0
+
+#define TEGRA_CSI_PG_GREEN_FREQ_RATE			0x018
+#define TEGRA_CSI_PG_BLUE_FREQ				0x01c
+#define   PG_BLUE_VERT_INIT_FREQ_OFFSET			16
+#define   PG_BLUE_HOR_INIT_FREQ_OFFSET			0
+
+#define TEGRA_CSI_PG_BLUE_FREQ_RATE			0x020
+#define TEGRA_CSI_PG_AOHDR				0x024
+
+#define TEGRA_CSI_DPCM_CTRL_A				0xa2c
+#define TEGRA_CSI_DPCM_CTRL_B				0xa30
+
+/* Other CSI registers: Starts from 0xa44, offset 0x20c */
+#define TEGRA_CSI_STALL_COUNTER				0x20c
+#define TEGRA_CSI_CSI_READONLY_STATUS			0x210
+#define TEGRA_CSI_CSI_SW_STATUS_RESET			0x214
+#define TEGRA_CSI_CLKEN_OVERRIDE			0x218
+#define TEGRA_CSI_DEBUG_CONTROL				0x21c
+#define TEGRA_CSI_DEBUG_COUNTER_0			0x220
+#define TEGRA_CSI_DEBUG_COUNTER_1			0x224
+#define TEGRA_CSI_DEBUG_COUNTER_2			0x228
+
+/* Tegra210 CSI Pixel Parser registers */
+#define TEGRA_CSI_PIXEL_PARSER_0_BASE			0x0838
+#define TEGRA_CSI_PIXEL_PARSER_1_BASE			0x086c
+#define TEGRA_CSI_PIXEL_PARSER_2_BASE			0x1038
+#define TEGRA_CSI_PIXEL_PARSER_3_BASE			0x106c
+#define TEGRA_CSI_PIXEL_PARSER_4_BASE			0x1838
+#define TEGRA_CSI_PIXEL_PARSER_5_BASE			0x186c
+
+#endif
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 55+ messages in thread

* [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-28 18:23 [RFC PATCH v1 0/5] Add Tegra driver for video capture Sowjanya Komatineni
                   ` (3 preceding siblings ...)
  2020-01-28 18:23 ` [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210 Sowjanya Komatineni
@ 2020-01-28 18:23 ` Sowjanya Komatineni
  2020-01-29  9:46   ` Thierry Reding
  2020-01-30 14:41 ` [RFC PATCH v1 0/5] Add Tegra driver for video capture Hans Verkuil
  2020-02-04 12:53 ` Hans Verkuil
  6 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-28 18:23 UTC (permalink / raw)
  To: skomatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Tegra210 contains VI controller for video input capture from MIPI
CSI camera sensors and also supports built-in test pattern generator.

CSI ports can be one-to-one mapped to VI channels for capturing from
an external sensor or from built-in test pattern generator.

This patch adds support for VI and CSI and enables them in Tegra210
device tree.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  8 +++++++
 arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 +++++++++++++++++++++++++-
 2 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index b0095072bc28..ec1b3033fa03 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -10,6 +10,14 @@
 			status = "okay";
 		};
 
+		vi@54080000 {
+			status = "okay";
+		};
+
+		csi@0x54080838 {
+			status = "okay";
+		};
+
 		sor@54580000 {
 			status = "okay";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 48c63256ba7f..c6107ec03ad1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -136,9 +136,38 @@
 
 		vi@54080000 {
 			compatible = "nvidia,tegra210-vi";
-			reg = <0x0 0x54080000 0x0 0x00040000>;
+			reg = <0x0 0x54080000 0x0 0x808>;
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+			clocks = <&tegra_car TEGRA210_CLK_VI>;
+			clock-names = "vi";
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+		};
+
+		csi@0x54080838 {
+			compatible = "nvidia,tegra210-csi";
+			reg = <0x0 0x54080838 0x0 0x2000>;
+			status = "disabled";
+			assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+					  <&tegra_car TEGRA210_CLK_CILCD>,
+					  <&tegra_car TEGRA210_CLK_CILE>;
+			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+						 <&tegra_car TEGRA210_CLK_PLL_P>,
+						 <&tegra_car TEGRA210_CLK_PLL_P>;
+			assigned-clock-rates = <102000000>,
+					       <102000000>,
+					       <102000000>;
+
+			clocks = <&tegra_car TEGRA210_CLK_CSI>,
+				 <&tegra_car TEGRA210_CLK_CILAB>,
+				 <&tegra_car TEGRA210_CLK_CILCD>,
+				 <&tegra_car TEGRA210_CLK_CILE>;
+			clock-names = "csi", "cilab", "cilcd", "cile";
+
 		};
 
 		tsec@54100000 {
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 3/5] dt-binding: tegra: Add VI and CSI bindings
  2020-01-28 18:23 ` [RFC PATCH v1 3/5] dt-binding: tegra: Add VI and CSI bindings Sowjanya Komatineni
@ 2020-01-28 20:32   ` Helen Koike
  2020-01-28 21:04     ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Helen Koike @ 2020-01-28 20:32 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Hi,

On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
> Tegra contains VI controller which can support up to 6 MIPI CSI
> camera sensors.
> 
> Each Tegra CSI port from CSI unit can be one-to-one mapper to
> VI channel and can capture from an external camera sensor or
> from built-in test pattern generator.
> 
> This patch adds dt-bindings for Tegra VI and CSI.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  .../bindings/display/tegra/nvidia,tegra20-host1x.txt           | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> index 9999255ac5b6..47cd6532b7d3 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> @@ -40,7 +40,7 @@ of the following host1x client modules:
>  
>    Required properties:
>    - compatible: "nvidia,tegra<chip>-vi"
> -  - reg: Physical base address and length of the controller's registers.
> +  - reg: Physical base address and length of the controller registers.
>    - interrupts: The interrupt outputs from the controller.
>    - clocks: Must contain one entry, for the module clock.
>      See ../clocks/clock-bindings.txt for details.
> @@ -49,6 +49,14 @@ of the following host1x client modules:
>    - reset-names: Must include the following entries:
>      - vi
>  
> +- csi: mipi csi interface to vi
> +
> +  Required properties:
> +  - compatible: "nvidia,tegra<chip>-csi"
> +  - reg: Physical base address and length of the controller registers.
> +  - clocks: Must contain entries csi, cilab, cilcd, cile clocks.
> +    See ../clocks/clock-bindings.txt for details.
> +

I think it would be nice to add an example, in the Example section at the end of this file, same as other modules do.

Regards,
Helen

>  - epp: encoder pre-processor
>  
>    Required properties:
> 

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 3/5] dt-binding: tegra: Add VI and CSI bindings
  2020-01-28 20:32   ` Helen Koike
@ 2020-01-28 21:04     ` Sowjanya Komatineni
  0 siblings, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-28 21:04 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/28/20 12:32 PM, Helen Koike wrote:
> External email: Use caution opening links or attachments
>
>
> Hi,
>
> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>> Tegra contains VI controller which can support up to 6 MIPI CSI
>> camera sensors.
>>
>> Each Tegra CSI port from CSI unit can be one-to-one mapper to
>> VI channel and can capture from an external camera sensor or
>> from built-in test pattern generator.
>>
>> This patch adds dt-bindings for Tegra VI and CSI.
>>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>> ---
>>   .../bindings/display/tegra/nvidia,tegra20-host1x.txt           | 10 +++++++++-
>>   1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
>> index 9999255ac5b6..47cd6532b7d3 100644
>> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
>> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
>> @@ -40,7 +40,7 @@ of the following host1x client modules:
>>
>>     Required properties:
>>     - compatible: "nvidia,tegra<chip>-vi"
>> -  - reg: Physical base address and length of the controller's registers.
>> +  - reg: Physical base address and length of the controller registers.
>>     - interrupts: The interrupt outputs from the controller.
>>     - clocks: Must contain one entry, for the module clock.
>>       See ../clocks/clock-bindings.txt for details.
>> @@ -49,6 +49,14 @@ of the following host1x client modules:
>>     - reset-names: Must include the following entries:
>>       - vi
>>
>> +- csi: mipi csi interface to vi
>> +
>> +  Required properties:
>> +  - compatible: "nvidia,tegra<chip>-csi"
>> +  - reg: Physical base address and length of the controller registers.
>> +  - clocks: Must contain entries csi, cilab, cilcd, cile clocks.
>> +    See ../clocks/clock-bindings.txt for details.
>> +
> I think it would be nice to add an example, in the Example section at the end of this file, same as other modules do.
>
> Regards,
> Helen
Thanks Helen. Will add in v2.
>
>>   - epp: encoder pre-processor
>>
>>     Required properties:
>>

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 18:23 ` [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210 Sowjanya Komatineni
@ 2020-01-28 21:45   ` Helen Koike
  2020-01-28 22:13     ` Sowjanya Komatineni
  2020-01-29 11:13   ` Thierry Reding
                     ` (3 subsequent siblings)
  4 siblings, 1 reply; 55+ messages in thread
From: Helen Koike @ 2020-01-28 21:45 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Hi Sowjanya,

I just took a really quick look, I didn't check the driver in deep, so just some small comments below.

On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
> Tegra210 contains a powerful Video Input (VI) hardware controller
> which can support up to 6 MIPI CSI camera sensors.
> 
> Each Tegra CSI port can be one-to-one mapped to VI channel and can
> capture from an external camera sensor connected to CSI or from
> built-in test pattern generator.
> 
> Tegra210 supports built-in test pattern generator from CSI to VI.
> 
> This patch adds a V4L2 media controller and capture driver support
> for Tegra210 built-in CSI to VI test pattern generator.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>

Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?

> ---
>  drivers/staging/media/Kconfig               |   2 +
>  drivers/staging/media/Makefile              |   1 +
>  drivers/staging/media/tegra/Kconfig         |  12 +
>  drivers/staging/media/tegra/Makefile        |  11 +
>  drivers/staging/media/tegra/TODO            |  10 +
>  drivers/staging/media/tegra/csi.h           | 111 +++++
>  drivers/staging/media/tegra/csi2_fops.c     | 335 +++++++++++++++
>  drivers/staging/media/tegra/csi2_fops.h     |  15 +
>  drivers/staging/media/tegra/host1x-video.c  | 120 ++++++
>  drivers/staging/media/tegra/host1x-video.h  |  33 ++
>  drivers/staging/media/tegra/mc_common.h     | 131 ++++++
>  drivers/staging/media/tegra/tegra-channel.c | 628 ++++++++++++++++++++++++++++
>  drivers/staging/media/tegra/tegra-core.c    | 111 +++++
>  drivers/staging/media/tegra/tegra-core.h    | 125 ++++++
>  drivers/staging/media/tegra/tegra-csi.c     | 380 +++++++++++++++++
>  drivers/staging/media/tegra/tegra-vi.c      | 351 ++++++++++++++++
>  drivers/staging/media/tegra/tegra-vi.h      | 101 +++++
>  drivers/staging/media/tegra/vi2_fops.c      | 364 ++++++++++++++++
>  drivers/staging/media/tegra/vi2_fops.h      |  15 +
>  drivers/staging/media/tegra/vi2_formats.h   | 119 ++++++
>  drivers/staging/media/tegra/vi2_registers.h | 194 +++++++++
>  21 files changed, 3169 insertions(+)
>  create mode 100644 drivers/staging/media/tegra/Kconfig
>  create mode 100644 drivers/staging/media/tegra/Makefile
>  create mode 100644 drivers/staging/media/tegra/TODO
>  create mode 100644 drivers/staging/media/tegra/csi.h
>  create mode 100644 drivers/staging/media/tegra/csi2_fops.c
>  create mode 100644 drivers/staging/media/tegra/csi2_fops.h
>  create mode 100644 drivers/staging/media/tegra/host1x-video.c
>  create mode 100644 drivers/staging/media/tegra/host1x-video.h
>  create mode 100644 drivers/staging/media/tegra/mc_common.h
>  create mode 100644 drivers/staging/media/tegra/tegra-channel.c
>  create mode 100644 drivers/staging/media/tegra/tegra-core.c
>  create mode 100644 drivers/staging/media/tegra/tegra-core.h
>  create mode 100644 drivers/staging/media/tegra/tegra-csi.c
>  create mode 100644 drivers/staging/media/tegra/tegra-vi.c
>  create mode 100644 drivers/staging/media/tegra/tegra-vi.h
>  create mode 100644 drivers/staging/media/tegra/vi2_fops.c
>  create mode 100644 drivers/staging/media/tegra/vi2_fops.h
>  create mode 100644 drivers/staging/media/tegra/vi2_formats.h
>  create mode 100644 drivers/staging/media/tegra/vi2_registers.h
> 
> diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
> index c394abffea86..e367030d4407 100644
> --- a/drivers/staging/media/Kconfig
> +++ b/drivers/staging/media/Kconfig
> @@ -34,6 +34,8 @@ source "drivers/staging/media/sunxi/Kconfig"
>  
>  source "drivers/staging/media/tegra-vde/Kconfig"
>  
> +source "drivers/staging/media/tegra/Kconfig"
> +
>  source "drivers/staging/media/ipu3/Kconfig"
>  
>  source "drivers/staging/media/soc_camera/Kconfig"
> diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
> index ea9fce8014bb..67a22ac709e8 100644
> --- a/drivers/staging/media/Makefile
> +++ b/drivers/staging/media/Makefile
> @@ -10,3 +10,4 @@ obj-$(CONFIG_VIDEO_IPU3_IMGU)	+= ipu3/
>  obj-$(CONFIG_SOC_CAMERA)	+= soc_camera/
>  obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0)	+= phy-rockchip-dphy-rx0/
>  obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1)	+= rkisp1/
> +obj-$(CONFIG_VIDEO_TEGRA)	+= tegra/
> diff --git a/drivers/staging/media/tegra/Kconfig b/drivers/staging/media/tegra/Kconfig
> new file mode 100644
> index 000000000000..443b99f2e2c9
> --- /dev/null
> +++ b/drivers/staging/media/tegra/Kconfig
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config VIDEO_TEGRA
> +	tristate "NVIDIA Tegra VI driver"
> +	depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
> +	depends on COMMON_CLK
> +	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> +	depends on MEDIA_CONTROLLER
> +	select TEGRA_HOST1X
> +	select VIDEOBUF2_DMA_CONTIG
> +	select V4L2_FWNODE
> +	help
> +	  Say yes here to enable support for Tegra video input hardware
> diff --git a/drivers/staging/media/tegra/Makefile b/drivers/staging/media/tegra/Makefile
> new file mode 100644
> index 000000000000..003d23444d49
> --- /dev/null
> +++ b/drivers/staging/media/tegra/Makefile
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: GPL-2.0
> +tegra-video-y := \
> +		host1x-video.o \
> +		tegra-channel.o \
> +		tegra-core.o \
> +		csi2_fops.o \
> +		vi2_fops.o \
> +		tegra-vi.o \
> +		tegra-csi.o
> +
> +obj-$(CONFIG_VIDEO_TEGRA) += tegra-video.o
> diff --git a/drivers/staging/media/tegra/TODO b/drivers/staging/media/tegra/TODO
> new file mode 100644
> index 000000000000..d7d64b13535e
> --- /dev/null
> +++ b/drivers/staging/media/tegra/TODO
> @@ -0,0 +1,10 @@
> +TODO list
> +* Currently driver supports Tegra build-in TPG Only with direct media links from CSI to VI.
> +  Update the driver to do TPG Vs Sensor media links based on the kernel config CONFIG_VIDEO_TEGRA_TPG.
> +* Add real camera sensor capture support
> +* Add RAW10 packed video format support to Tegra210 video formats
> +* Add Tegra CSI MIPI pads calibration
> +* Add MIPI clock Settle time computation based on the data rate
> +* Add support for Ganged mode
> +* Make sure v4l2-compliance tests pass with all of the above implementations.
> +* Add SMMU support for VI to avoid cma_alloc failures with higher resolutions of some video formats.
> diff --git a/drivers/staging/media/tegra/csi.h b/drivers/staging/media/tegra/csi.h
> new file mode 100644
> index 000000000000..81cdda4b6bdd
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi.h
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __CSI_H_
> +#define __CSI_H_
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +/*
> + * Each CSI brick supports max of 4 lanes that can be used as either
> + * one x4 port using both CILA and CILB partitions of a CSI brick or can
> + * be used as two x2 ports with one x2 from CILA and the other x2 from
> + * CILB.
> + */
> +#define CSI_LANES_PER_BRICK	4
> +#define CSI_PORTS_PER_BRICK	2
> +
> +/* each CSI channel can have one sink and one source pads */
> +#define TEGRA_CSI_PADS_NUM	2
> +
> +enum tegra_csi_cil_port {
> +	PORT_A = 0,
> +	PORT_B,
> +};
> +
> +enum tegra_csi_block {
> +	CSI_CIL_AB = 0,
> +	CSI_CIL_CD,
> +	CSI_CIL_EF,
> +};
> +
> +struct tegra_csi_device;
> +
> +struct tegra_csi_port {
> +	void __iomem *pixel_parser;
> +	void __iomem *cila;
> +	void __iomem *cilb;
> +	void __iomem *tpg;
> +
> +	/* one pair of sink/source pad has one format */
> +	struct v4l2_mbus_framefmt format;
> +	unsigned int lanes;
> +};
> +
> +struct tegra_csi_channel {
> +	struct list_head list;
> +	struct v4l2_subdev subdev;
> +	struct media_pad pads[TEGRA_CSI_PADS_NUM];
> +	struct device_node *of_node;
> +	struct tegra_csi_device *csi;
> +	struct tegra_csi_port *ports;
> +	unsigned int numlanes;
> +	unsigned int numpads;
> +	u8 csi_port_num;
> +
> +	/* protects csi channel ports format fields */
> +	struct mutex format_lock;
> +};
> +
> +struct tegra_csi_soc_data {
> +	const struct tegra_csi_fops *csi_fops;
> +	unsigned int cil_max_clk_hz;
> +	unsigned int num_tpg_channels;
> +};
> +
> +/**
> + * struct tegra_csi_device - NVIDIA Tegra CSI device structure
> + * @dev: device struct
> + * @client: host1x_client struct
> + *
> + * @iomem: register base
> + * @csi_clk: clock for CSI
> + * @cilab_clk: clock for CIL AB
> + * @cilcd_clk: clock for CIL CD
> + * @cilef_clk: clock for CIL EF
> + * @tpg_clk: clock for internal CSI TPG logic
> + *
> + * @soc_data: pointer to SoC data structure
> + * @fops: csi operations
> + *
> + * @channels: list of CSI channels
> + */
> +struct tegra_csi_device {
> +	struct device *dev;
> +	struct host1x_client client;
> +
> +	void __iomem *iomem;
> +	struct clk *csi_clk;
> +	struct clk *cilab_clk;
> +	struct clk *cilcd_clk;
> +	struct clk *cilef_clk;
> +	struct clk *tpg_clk;
> +	atomic_t clk_refcnt;
> +
> +	const struct tegra_csi_soc_data *soc_data;
> +	const struct tegra_csi_fops *fops;
> +
> +	struct list_head csi_chans;
> +};
> +
> +void tegra_csi_error_status(struct v4l2_subdev *subdev);
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/csi2_fops.c b/drivers/staging/media/tegra/csi2_fops.c
> new file mode 100644
> index 000000000000..5f2f7bd3ae50
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi2_fops.c
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk/tegra.h>
> +#include <linux/delay.h>
> +
> +#include "vi2_registers.h"
> +#include "mc_common.h"
> +#include "csi2_fops.h"
> +#include "csi.h"
> +
> +/* CSI block registers offset */
> +#define TEGRA210_CSI_PORT_OFFSET		0x34
> +/* CSI CIL parition registers offset */
> +#define TEGRA210_CSI_CIL_OFFSET			0x0f4
> +/* CSI TPG registers offset */
> +#define TEGRA210_CSI_TPG_OFFSET			0x18c
> +
> +#define CSI_PP_OFFSET(block)	((block) * 0x800)
> +
> +static void csi_write(struct tegra_csi_channel *chan, u8 block,
> +		      unsigned int addr, u32 val)
> +{
> +	void __iomem *csi_pp_base;
> +
> +	csi_pp_base = chan->csi->iomem + CSI_PP_OFFSET(block);
> +	writel(val, csi_pp_base + addr);
> +}
> +
> +/* Pixel parser registers accessors */
> +static void pp_write(struct tegra_csi_port *port, u32 addr, u32 val)
> +{
> +	writel(val, port->pixel_parser + addr);
> +}
> +
> +static u32 pp_read(struct tegra_csi_port *port, u32 addr)
> +{
> +	return readl(port->pixel_parser + addr);
> +}
> +
> +/* CSI CIL A/B port registers accessors */
> +static void cil_write(struct tegra_csi_port *port, u8 port_id,
> +		      u32 addr, u32 val)
> +{
> +	if (port_id & PORT_B)
> +		writel(val, port->cilb + addr);
> +	else
> +		writel(val, port->cila + addr);
> +}
> +
> +static u32 cil_read(struct tegra_csi_port *port, u8 port_id,
> +		    u32 addr)
> +{
> +	if (port_id & PORT_B)
> +		return readl(port->cilb + addr);
> +	else
> +		return readl(port->cila + addr);
> +}
> +
> +/* Test pattern generator registers accessor */
> +static void tpg_write(struct tegra_csi_port *port, unsigned int addr, u32 val)
> +{
> +	writel(val, port->tpg + addr);
> +}
> +
> +static void csi2_error_status(struct tegra_csi_channel *csi_chan)
> +{
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	unsigned int port_num = csi_chan->csi_port_num;
> +	struct tegra_csi_port *port = csi_chan->ports;
> +	u32 val;
> +
> +	val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
> +	dev_err(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n", val);
> +
> +	val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
> +	dev_err(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
> +
> +	val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
> +	dev_err(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
> +}
> +
> +static int csi2_start_streaming(struct tegra_csi_channel *csi_chan,
> +				u8 pg_mode, int enable)
> +{
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	unsigned int port_num = csi_chan->csi_port_num;
> +	unsigned int block = port_num >> 1;
> +	struct tegra_csi_port *port = csi_chan->ports;
> +	unsigned int cil_max_freq = csi->soc_data->cil_max_clk_hz;
> +	struct clk *cil_clk;
> +	int ret;
> +
> +	if (block == CSI_CIL_AB)
> +		cil_clk = csi->cilab_clk;
> +	else if (block == CSI_CIL_CD)
> +		cil_clk = csi->cilcd_clk;
> +	else
> +		cil_clk = csi->cilef_clk;
> +
> +	if (enable) {
> +		ret = clk_set_rate(cil_clk, cil_max_freq);
> +		if (ret)
> +			dev_err(csi->dev,
> +				"failed to set cil clk rate, err: %d\n", ret);
> +
> +		/* enable CIL clock on first open */
> +		if (atomic_add_return(1, &csi->clk_refcnt) == 1) {
> +			ret = clk_prepare_enable(cil_clk);
> +			if (ret) {
> +				dev_err(csi->dev,
> +					"failed to enable cil clk, err: %d\n",
> +					ret);
> +				return ret;
> +			}
> +		}
> +
> +		/*
> +		 * On Tegra210, TPG internal logic uses PLLD out along with
> +		 * the CIL clock.
> +		 * So, enable TPG clock during TPG mode streaming.
> +		 */
> +		if (pg_mode) {
> +			ret = clk_set_rate(csi->tpg_clk, TEGRA210_TPG_CLOCK);
> +			if (ret)
> +				dev_err(csi->dev,
> +					"failed to set tpg clk rate\n");
> +
> +			ret = clk_prepare_enable(csi->tpg_clk);
> +			if (ret) {
> +				dev_err(csi->dev,
> +					"failed to enable tpg clk, err: %d\n",
> +					ret);
> +				return ret;
> +			}
> +		}
> +
> +		csi_write(csi_chan, block, TEGRA_CSI_CLKEN_OVERRIDE, 0);
> +
> +		/* clean up status */
> +		pp_write(port, TEGRA_CSI_PIXEL_PARSER_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CILX_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
> +
> +		/* CIL PHY registers setup */
> +		cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
> +
> +		/*
> +		 * The CSI unit provides for connection of up to six cameras in
> +		 * the system and is organized as three identical instances of
> +		 * two MIPI support blocks, each with a separate 4-lane
> +		 * interface that can be configured as a single camera with 4
> +		 * lanes or as a dual camera with 2 lanes available for each
> +		 * camera.
> +		 */
> +		if (port->lanes == 4) {
> +			cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0,
> +				  BRICK_CLOCK_A_4X);
> +
> +			cil_write(port, (port_num + 1),
> +				  TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
> +
> +			cil_write(port, (port_num + 1),
> +				  TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
> +
> +			cil_write(port, (port_num + 1),
> +				  TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
> +
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_ENABLE);
> +		} else {
> +			u32 val = ((port_num & 1) == PORT_A) ?
> +				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_NOP :
> +				  CSI_B_PHY_CIL_ENABLE | CSI_A_PHY_CIL_NOP;
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  val);
> +		}
> +
> +		/* CSI pixel parser registers setup */
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_RST);
> +		pp_write(port, TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK, 0x0);
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL0,
> +			 CSI_PP_PACKET_HEADER_SENT |
> +			 CSI_PP_DATA_IDENTIFIER_ENABLE |
> +			 CSI_PP_WORD_COUNT_SELECT_HEADER |
> +			 CSI_PP_CRC_CHECK_ENABLE |  CSI_PP_WC_CHECK |
> +			 CSI_PP_OUTPUT_FORMAT_STORE |
> +			 CSI_PP_HEADER_EC_DISABLE | CSI_PPA_PAD_FRAME_NOPAD |
> +			 (port_num & 1));
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL1,
> +			 (0x1 << CSI_PP_TOP_FIELD_FRAME_OFFSET) |
> +			 (0x1 << CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET));
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_GAP,
> +			 0x14 << PP_FRAME_MIN_GAP_OFFSET);
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME, 0x0);
> +		pp_write(port, TEGRA_CSI_INPUT_STREAM_CONTROL,
> +			 (0x3f << CSI_SKIP_PACKET_THRESHOLD_OFFSET) |
> +			 (port->lanes - 1));
> +
> +		/* TPG setup */
> +		if (pg_mode) {
> +			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
> +				  ((pg_mode - 1) << PG_MODE_OFFSET) |
> +				  PG_ENABLE);
> +			tpg_write(port, TEGRA_CSI_PG_PHASE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_RED_FREQ,
> +				  (0x10 << PG_RED_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_RED_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_RED_FREQ_RATE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ,
> +				  (0x10 << PG_GREEN_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_GREEN_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ_RATE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ,
> +				  (0x10 << PG_BLUE_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_BLUE_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ_RATE, 0x0);
> +		}
> +
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_ENABLE);
> +	} else {
> +		u32 val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
> +
> +		dev_dbg(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n",
> +			val);
> +
> +		val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
> +		dev_dbg(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
> +
> +		val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
> +		dev_dbg(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
> +
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_DISABLE);
> +
> +		if (pg_mode) {
> +			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
> +				  ((pg_mode - 1) << PG_MODE_OFFSET) |
> +				  PG_DISABLE);
> +			clk_disable_unprepare(csi->tpg_clk);
> +		}
> +
> +		if (port->lanes == 4) {
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  CSI_A_PHY_CIL_DISABLE |
> +				  CSI_B_PHY_CIL_DISABLE);
> +
> +		} else {
> +			u32 val = ((port_num & 1) == PORT_A) ?
> +				  CSI_A_PHY_CIL_DISABLE | CSI_B_PHY_CIL_NOP :
> +				  CSI_B_PHY_CIL_DISABLE | CSI_A_PHY_CIL_NOP;
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  val);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int csi2_hw_init(struct tegra_csi_device *csi)
> +{
> +	struct tegra_csi_channel *csi_chan;
> +	struct tegra_csi_port *port;
> +	u8 portno;
> +	int ret;
> +
> +	csi->cilab_clk = devm_clk_get(csi->dev, "cilab");
> +	if (IS_ERR(csi->cilab_clk)) {
> +		dev_err(csi->dev, "Failed to get cilab clock\n");
> +		return PTR_ERR(csi->cilab_clk);
> +	}
> +
> +	csi->cilcd_clk = devm_clk_get(csi->dev, "cilcd");
> +	if (IS_ERR(csi->cilcd_clk)) {
> +		dev_err(csi->dev, "Failed to get cilcd clock\n");
> +		return PTR_ERR(csi->cilcd_clk);
> +	}
> +
> +	csi->cilef_clk = devm_clk_get(csi->dev, "cile");
> +	if (IS_ERR(csi->cilef_clk)) {
> +		dev_err(csi->dev, "Failed to get cile clock\n");
> +		return PTR_ERR(csi->cilef_clk);
> +	}
> +
> +	csi->tpg_clk = devm_clk_get(csi->dev, "csi_tpg");
> +	if (IS_ERR(csi->tpg_clk)) {
> +		dev_err(csi->dev, "Failed to get csi_tpg clock\n");
> +		return PTR_ERR(csi->tpg_clk);
> +	}
> +
> +	csi->csi_clk = devm_clk_get(csi->dev, "csi");
> +	if (IS_ERR(csi->csi_clk)) {
> +		dev_err(csi->dev, "Failed to get csi clock\n");
> +		return PTR_ERR(csi->csi_clk);
> +	}
> +
> +	ret = clk_prepare_enable(csi->csi_clk);
> +	if (ret) {
> +		dev_err(csi->dev, "Failed to enable csi clk, err: %d\n", ret);
> +		return ret;
> +	}
> +
> +	list_for_each_entry(csi_chan, &csi->csi_chans, list) {
> +		void __iomem *csi_pp_base;
> +
> +		port = csi_chan->ports;
> +		portno = csi_chan->csi_port_num;
> +		csi_pp_base = csi->iomem + CSI_PP_OFFSET(portno >> 1);
> +		port->pixel_parser = csi_pp_base +
> +				     (portno % CSI_PORTS_PER_BRICK) *
> +				     TEGRA210_CSI_PORT_OFFSET;
> +		port->cila = csi_pp_base + TEGRA210_CSI_CIL_OFFSET;
> +		port->cilb = port->cila + TEGRA210_CSI_PORT_OFFSET;
> +		port->tpg = port->pixel_parser + TEGRA210_CSI_TPG_OFFSET;
> +	}
> +
> +	return 0;
> +}
> +
> +const struct tegra_csi_fops csi2_fops = {
> +	.hw_init = csi2_hw_init,
> +	.csi_start_streaming = csi2_start_streaming,
> +	.csi_err_status = csi2_error_status,
> +};

If I saw correctly, you don't have other instances of struct tegra_csi_fops with different functions.
So why not exposing the functions directly instead of creating a global variable?

> +EXPORT_SYMBOL(csi2_fops);
> diff --git a/drivers/staging/media/tegra/csi2_fops.h b/drivers/staging/media/tegra/csi2_fops.h
> new file mode 100644
> index 000000000000..cf22a28ceb1f
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi2_fops.h
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __CSI2_H__
> +#define __CSI2_H__
> +
> +#define	TEGRA210_TPG_CLOCK		594000000
> +#define	TEGRA210_CSI_CIL_CLK_MAX	102000000
> +#define TEGRA210_CSI_BRICKS_MAX		3
> +
> +extern const struct tegra_csi_fops csi2_fops;
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
> new file mode 100644
> index 000000000000..740806121e6b
> --- /dev/null
> +++ b/drivers/staging/media/tegra/host1x-video.c
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/host1x.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "host1x-video.h"
> +
> +static int host1x_video_probe(struct host1x_device *dev)
> +{
> +	struct tegra_camera *cam;
> +	int ret;
> +
> +	cam = devm_kzalloc(&dev->dev, sizeof(*cam), GFP_KERNEL);
> +	if (!cam)
> +		return -ENOMEM;
> +
> +	cam->dev = get_device(&dev->dev);
> +	cam->media_dev.dev = cam->dev;
> +	strscpy(cam->media_dev.model, "NVIDIA Tegra Video Input Device",
> +		sizeof(cam->media_dev.model));
> +	cam->media_dev.hw_revision = 3;
> +
> +	media_device_init(&cam->media_dev);
> +	ret = media_device_register(&cam->media_dev);
> +	if (ret < 0) {
> +		dev_err(cam->dev, "failed to register media device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	cam->v4l2_dev.mdev = &cam->media_dev;
> +	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
> +	if (ret < 0) {
> +		dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
> +		goto register_error;
> +	}
> +
> +	dev_set_drvdata(&dev->dev, cam);
> +
> +	ret = host1x_device_init(dev);
> +	if (ret < 0)
> +		goto dev_exit;
> +
> +	return 0;
> +
> +dev_exit:
> +	host1x_device_exit(dev);
> +	v4l2_device_unregister(&cam->v4l2_dev);
> +register_error:
> +	media_device_unregister(&cam->media_dev);
> +	media_device_cleanup(&cam->media_dev);
> +
> +	return ret;
> +}
> +
> +static int host1x_video_remove(struct host1x_device *dev)
> +{
> +	struct tegra_camera *cam = dev_get_drvdata(&dev->dev);
> +
> +	host1x_device_exit(dev);
> +	v4l2_device_unregister(&cam->v4l2_dev);
> +	media_device_unregister(&cam->media_dev);
> +	media_device_cleanup(&cam->media_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id host1x_video_subdevs[] = {
> +	{ .compatible = "nvidia,tegra210-csi", },
> +	{ .compatible = "nvidia,tegra210-vi", },
> +	{ }
> +};
> +
> +static struct host1x_driver host1x_video_driver = {
> +	.driver = {
> +		.name = "host1x_video",
> +	},
> +	.probe = host1x_video_probe,
> +	.remove = host1x_video_remove,
> +	.subdevs = host1x_video_subdevs,
> +};
> +
> +static struct platform_driver * const drivers[] = {
> +	&tegra_csi_driver,
> +	&tegra_vi_driver,
> +};
> +
> +static int __init host1x_video_init(void)
> +{
> +	int err;
> +
> +	err = host1x_driver_register(&host1x_video_driver);
> +	if (err < 0)
> +		return err;
> +
> +	err = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
> +	if (err < 0)
> +		goto unregister_host1x;
> +
> +	return 0;
> +
> +unregister_host1x:
> +	host1x_driver_unregister(&host1x_video_driver);
> +	return err;
> +}
> +module_init(host1x_video_init);
> +
> +static void __exit host1x_video_exit(void)
> +{
> +	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
> +	host1x_driver_unregister(&host1x_video_driver);
> +}
> +module_exit(host1x_video_exit);
> +
> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
> +MODULE_DESCRIPTION("NVIDIA Tegra Host1x Video driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
> new file mode 100644
> index 000000000000..84d28e6f4362
> --- /dev/null
> +++ b/drivers/staging/media/tegra/host1x-video.h
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef HOST1X_VIDEO_H
> +#define HOST1X_VIDEO_H 1
> +
> +#include <linux/host1x.h>
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#include "tegra-vi.h"
> +#include "csi.h"
> +
> +struct tegra_camera {
> +	struct v4l2_device v4l2_dev;
> +	struct media_device media_dev;
> +	struct device *dev;

You can use cam->media_dev.dev instead of having this pointer.

> +	struct tegra_vi *vi;
> +	struct tegra_csi_device *csi;
> +};
> +
> +extern struct platform_driver tegra_vi_driver;
> +extern struct platform_driver tegra_csi_driver;
> +
> +#endif /* HOST1X_VIDEO_H */
> diff --git a/drivers/staging/media/tegra/mc_common.h b/drivers/staging/media/tegra/mc_common.h
> new file mode 100644
> index 000000000000..9e88f3295ef4
> --- /dev/null
> +++ b/drivers/staging/media/tegra/mc_common.h
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __MC_COMMON_H_
> +#define __MC_COMMON_H_
> +
> +#include <linux/host1x.h>
> +#include <linux/mutex.h>
> +#include <linux/spinlock.h>
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#include "tegra-core.h"
> +#include "tegra-vi.h"
> +#include "csi.h"
> +
> +#define MAX_FORMAT_NUM	64
> +
> +struct tegra_csi_fops {
> +	int (*hw_init)(struct tegra_csi_device *csi);
> +	int (*csi_start_streaming)(struct tegra_csi_channel *csi_chan,
> +				   u8 pg_mode, int enable);
> +	void (*csi_err_status)(struct tegra_csi_channel *csi_chan);
> +};
> +
> +/**
> + * struct tegra_channel - Tegra video channel
> + * @list: list entry in a composite device dmas list
> + * @video: V4L2 video device associated with the video channel
> + * @video_lock: protects the @format and @queue fields
> + * @pad: media pad for the video device entity
> + *
> + * @vi: composite device DT node port number for the channel
> + *
> + * @sp: host1x syncpoint pointer
> + *
> + * @kthread_capture_start: capture start kthread of this video channel
> + * @start_wait: wait queue used by capture start kthread
> + * @kthread_capture_done: capture done kthread of this video channel
> + * @done_wait: wait queue used by capture done kthread
> + *
> + * @format: active V4L2 pixel format
> + * @fmtinfo: format information corresponding to the active @format
> + * @video_formats: supported video formats
> + * @nformats: supported number of video formats
> + *
> + * @queue: vb2 buffers queue
> + * @sequence: V4L2 buffers sequence number
> + *
> + * @capture: list of queued buffers for capture
> + * @start_lock: protects the capture queued list
> + * @done: list of capture done queued buffers
> + * @done_lock: protects the capture done queue list
> + *
> + * @stride_align: channel buffer stride alignment
> + * @width_align: channel buffer width alignment
> + * @height_align: channel buffer height alignment
> + * @size_align: channel buffer size alignment
> +
> + * @port: CSI port of this video channel
> + *
> + * @ctrl_handler: V4L2 control handler of this video channel
> + * @tpg_fmts_bitmap: a bitmap for supported TPG formats
> + */
> +struct tegra_channel {
> +	struct list_head list;
> +	struct video_device video;
> +	/* protects the @format and @queue fields */
> +	struct mutex video_lock;
> +	struct media_pad pad;
> +
> +	struct tegra_vi *vi;
> +	struct host1x_syncpt *sp;
> +
> +	struct task_struct *kthread_capture_start;
> +	wait_queue_head_t start_wait;
> +	struct task_struct *kthread_capture_done;
> +	wait_queue_head_t done_wait;
> +
> +	struct v4l2_pix_format format;
> +	const struct tegra_video_format *fmtinfo;
> +	const struct tegra_video_format *video_formats;
> +	unsigned int nformats;
> +	struct vb2_queue queue;
> +	u32 sequence;
> +
> +	struct list_head capture;
> +	/* protects the capture queued list */
> +	spinlock_t start_lock;
> +	struct list_head done;
> +	/* protects the capture done queue list */
> +	spinlock_t done_lock;
> +
> +	unsigned int stride_align;
> +	unsigned int width_align;
> +	unsigned int height_align;
> +	unsigned int size_align;
> +	unsigned char port;
> +
> +	struct v4l2_ctrl_handler ctrl_handler;
> +	DECLARE_BITMAP(tpg_fmts_bitmap, MAX_FORMAT_NUM);
> +};
> +
> +#define to_tegra_channel(vdev) \
> +	container_of(vdev, struct tegra_channel, video)

Why not inline instead of define. Inlines has the advantage of checking types.

> +
> +const struct tegra_video_format *tegra_core_get_default_format(void);
> +u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
> +				 unsigned int index);
> +int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
> +			       unsigned int offset);
> +const struct tegra_video_format *
> +tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc);
> +
> +int tegra_channel_init(struct tegra_channel *chan);
> +int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan);
> +int tegra_channel_cleanup(struct tegra_channel *chan);
> +int tegra_channel_set_stream(struct tegra_channel *chan, bool on);
> +void tegra_channel_queued_buf_done(struct tegra_channel *chan,
> +				   enum vb2_buffer_state state);
> +int tegra_channel_csi_error_status(struct tegra_channel *chan);
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/tegra-channel.c b/drivers/staging/media/tegra/tegra-channel.c
> new file mode 100644
> index 000000000000..7561f6fb8748
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-channel.c
> @@ -0,0 +1,628 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/atomic.h>
> +#include <linux/bitmap.h>
> +#include <linux/clk.h>
> +#include <linux/host1x.h>
> +#include <linux/kthread.h>
> +#include <linux/lcm.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fh.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include <soc/tegra/pmc.h>
> +
> +#include "mc_common.h"
> +#include "tegra-vi.h"
> +#include "host1x-video.h"
> +
> +#define MAX_CID_CONTROLS		1
> +
> +static const char *const vi_pattern_strings[] = {
> +	"Black/White Direct Mode",
> +	"Color Patch Mode",
> +};
> +
> +static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct tegra_channel *chan = container_of(ctrl->handler,
> +						  struct tegra_channel,
> +						  ctrl_handler);
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_TEST_PATTERN:
> +		chan->vi->pg_mode = ctrl->val + 1;
> +		dev_info(chan->vi->dev, "TPG mode is set to %s\n",
> +			 vi_pattern_strings[ctrl->val]);
> +		break;
> +
> +	default:
> +		dev_err(chan->vi->dev, "Invalid Tegra video control\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops vi_ctrl_ops = {
> +	.s_ctrl	= vi_s_ctrl,
> +};
> +
> +/*
> + * videobuf2 queue operations
> + */
> +static int tegra_channel_queue_setup(struct vb2_queue *vq,
> +				     unsigned int *nbuffers,
> +				     unsigned int *nplanes,
> +				     unsigned int sizes[],
> +				     struct device *alloc_devs[])
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vq);
> +	unsigned int count = *nbuffers;
> +
> +	if (*nplanes)
> +		return sizes[0] < chan->format.sizeimage ? -EINVAL : 0;
> +
> +	*nplanes = 1;
> +	sizes[0] = chan->format.sizeimage;
> +	alloc_devs[0] = chan->vi->dev;
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_buffer_prepare(struct vb2_buffer *vb)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +	struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
> +	unsigned long size = chan->format.sizeimage;
> +
> +	if (vb2_plane_size(vb, 0) < size) {
> +		v4l2_err(chan->video.v4l2_dev, "buffer too small (%lu < %lu)\n",
> +			 vb2_plane_size(vb, 0), size);
> +		return -EINVAL;
> +	}
> +
> +	vb2_set_plane_payload(vb, 0, size);
> +	buf->chan = chan;
> +	buf->addr = vb2_dma_contig_plane_dma_addr(vb, 0);
> +
> +	return 0;
> +}
> +
> +static void tegra_channel_buffer_queue(struct vb2_buffer *vb)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +	struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
> +
> +	/* put buffer into the capture queue */
> +	spin_lock(&chan->start_lock);
> +	list_add_tail(&buf->queue, &chan->capture);
> +	spin_unlock(&chan->start_lock);
> +
> +	/* wait up kthread for capture */
> +	wake_up_interruptible(&chan->start_wait);
> +}
> +
> +int tegra_channel_csi_error_status(struct tegra_channel *chan)
> +{
> +	struct media_entity *entity;
> +	struct media_pad *pad;
> +	struct v4l2_subdev *subdev;
> +
> +	pad = media_entity_remote_pad(&chan->pad);
> +	if (!pad)
> +		return -ENODEV;
> +
> +	entity = pad->entity;
> +	subdev = media_entity_to_v4l2_subdev(entity);
> +
> +	tegra_csi_error_status(subdev);
> +
> +	return 0;
> +}
> +
> +static struct v4l2_subdev *
> +tegra_channel_get_remote_subdev(struct tegra_channel *chan)
> +{
> +	struct media_pad *pad;
> +	struct v4l2_subdev *subdev;
> +	struct media_entity *entity;
> +
> +	pad = media_entity_remote_pad(&chan->pad);
> +	entity = pad->entity;
> +	subdev = media_entity_to_v4l2_subdev(entity);
> +
> +	return subdev;
> +}
> +
> +int tegra_channel_set_stream(struct tegra_channel *chan, bool on)
> +{
> +	struct v4l2_subdev *subdev;
> +	int ret;
> +
> +	/* stream CSI */
> +	subdev = tegra_channel_get_remote_subdev(chan);
> +	v4l2_set_subdev_hostdata(subdev, chan);
> +	ret = v4l2_subdev_call(subdev, video, s_stream, on);
> +	if (on && ret < 0 && ret != -ENOIOCTLCMD)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +void tegra_channel_queued_buf_done(struct tegra_channel *chan,
> +				   enum vb2_buffer_state state)
> +{
> +	struct tegra_channel_buffer *buf, *nbuf;
> +
> +	spin_lock(&chan->start_lock);
> +	list_for_each_entry_safe(buf, nbuf, &chan->capture, queue) {
> +		vb2_buffer_done(&buf->buf.vb2_buf, state);
> +		list_del(&buf->queue);
> +	}
> +
> +	spin_unlock(&chan->start_lock);
> +}
> +
> +static int tegra_channel_start_streaming(struct vb2_queue *vq, u32 count)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vq);
> +
> +	if (chan->vi->fops->vi_start_streaming)
> +		return chan->vi->fops->vi_start_streaming(vq, count);
> +
> +	return 0;
> +}
> +
> +static void tegra_channel_stop_streaming(struct vb2_queue *vq)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vq);
> +
> +	if (chan->vi->fops->vi_start_streaming)
> +		chan->vi->fops->vi_stop_streaming(vq);
> +}
> +
> +static const struct vb2_ops tegra_channel_queue_qops = {
> +	.queue_setup = tegra_channel_queue_setup,
> +	.buf_prepare = tegra_channel_buffer_prepare,
> +	.buf_queue = tegra_channel_buffer_queue,
> +	.wait_prepare = vb2_ops_wait_prepare,
> +	.wait_finish = vb2_ops_wait_finish,
> +	.start_streaming = tegra_channel_start_streaming,
> +	.stop_streaming = tegra_channel_stop_streaming,
> +};
> +
> +/*
> + * V4L2 ioctls
> + */
> +static int tegra_channel_querycap(struct file *file, void *fh,
> +				  struct v4l2_capability *cap)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +
> +	cap->device_caps = chan->video.device_caps;
> +	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
> +	strscpy(cap->driver, "tegra-video", sizeof(cap->driver));
> +	strscpy(cap->card, chan->video.name, sizeof(cap->card));
> +	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s:%u",
> +		 dev_name(chan->vi->dev), chan->port);
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_enum_format(struct file *file, void *fh,
> +				     struct v4l2_fmtdesc *f)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +	unsigned int index = 0, i;
> +	unsigned long *fmts_bitmap = chan->tpg_fmts_bitmap;
> +
> +	if (f->index >= bitmap_weight(fmts_bitmap, MAX_FORMAT_NUM))
> +		return -EINVAL;
> +
> +	for (i = 0; i < f->index + 1; i++, index++)
> +		index = find_next_bit(fmts_bitmap, MAX_FORMAT_NUM, index);
> +
> +	f->pixelformat = tegra_core_get_fourcc_by_idx(chan, index - 1);
> +
> +	return 0;
> +}
> +
> +static void
> +tegra_channel_fmt_align(struct tegra_channel *chan,
> +			const struct tegra_frac *bpp,
> +			u32 *width, u32 *height, u32 *bytesperline)
> +{
> +	unsigned int min_width, max_width;
> +	unsigned int min_bpl, max_bpl, bpl;
> +	unsigned int align, fmt_align;
> +	unsigned int temp_width, temp_bpl;
> +	unsigned int numerator, denominator;
> +
> +	denominator = (!bpp->denominator) ? 1 : bpp->denominator;
> +	numerator = (!bpp->numerator) ? 1 : bpp->numerator;
> +	fmt_align = (denominator == 1) ? numerator : 1;
> +	align = lcm(chan->width_align, fmt_align);
> +	bpl = (*width * numerator) / denominator;
> +
> +	if (chan->vi->fops->vi_stride_align)
> +		chan->vi->fops->vi_stride_align(&bpl);
> +
> +	if (!*bytesperline)
> +		*bytesperline = bpl;
> +
> +	/*
> +	 * The transfer alignment requirements are expressed in bytes. Compute
> +	 * the minimum and maximum values, clamp the requested width and convert
> +	 * it back to pixels.
> +	 * use bytesperline to adjust width for applicaton related requriements.
> +	 */
> +	min_width = roundup(TEGRA_MIN_WIDTH, align);
> +	max_width = rounddown(TEGRA_MAX_WIDTH, align);
> +	temp_width = roundup(bpl, align);
> +	*width = (clamp(temp_width, min_width, max_width) * denominator) /
> +			numerator;
> +	*height = clamp(*height, TEGRA_MIN_HEIGHT, TEGRA_MAX_HEIGHT);
> +
> +	/*
> +	 * Clamp the requested bytes per line value. If the maximum bytes per
> +	 * line value is zero, the module doesn't support user configurable line
> +	 * sizes. Override the requested value with the minimum in that case.
> +	 */
> +	min_bpl = bpl;
> +	max_bpl = rounddown(TEGRA_MAX_WIDTH, chan->stride_align);
> +	temp_bpl = roundup(*bytesperline, chan->stride_align);
> +	*bytesperline = clamp(temp_bpl, min_bpl, max_bpl);
> +}
> +
> +static void tegra_channel_update_format(struct tegra_channel *chan, u32 width,
> +					u32 height, u32 fourcc,
> +					const struct tegra_frac *bpp,
> +					u32 preferred_stride)
> +{
> +	u32 denominator = (!bpp->denominator) ? 1 : bpp->denominator;
> +	u32 numerator = (!bpp->numerator) ? 1 : bpp->numerator;
> +	u32 bytesperline = (width * numerator / denominator);
> +	u32 sizeimage, height_aligned;
> +
> +	chan->format.width = width;
> +	chan->format.height = height;
> +	chan->format.pixelformat = fourcc;
> +	chan->format.bytesperline = preferred_stride ?: bytesperline;
> +
> +	tegra_channel_fmt_align(chan, bpp,
> +				&chan->format.width,
> +				&chan->format.height,
> +				&chan->format.bytesperline);
> +
> +	/* calculate the sizeimage per plane */
> +	height_aligned = roundup(chan->format.height, chan->height_align);
> +	sizeimage = chan->format.bytesperline * height_aligned;
> +	chan->format.sizeimage = roundup(sizeimage, chan->size_align);
> +}
> +
> +static int tegra_channel_get_format(struct file *file, void *fh,
> +				    struct v4l2_format *format)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +
> +	format->fmt.pix = chan->format;
> +
> +	return 0;
> +}
> +
> +static int __tegra_channel_try_format(struct tegra_channel *chan,
> +				      struct v4l2_pix_format *pix,
> +				      const struct tegra_video_format **vfmt)
> +{
> +	const struct tegra_video_format *fmt_info;
> +	struct v4l2_subdev *subdev;
> +	struct v4l2_subdev_format fmt;
> +	struct v4l2_subdev_pad_config *pad_cfg;
> +
> +	subdev = tegra_channel_get_remote_subdev(chan);
> +	pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
> +	if (!pad_cfg)
> +		return -ENOMEM;
> +
> +	/*
> +	 * Retrieve format information and select the default format if the
> +	 * requested format isn't supported.
> +	 */
> +	fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
> +	if (!fmt_info) {
> +		pix->pixelformat = chan->format.pixelformat;
> +		pix->colorspace = chan->format.colorspace;
> +		fmt_info = tegra_core_get_format_by_fourcc(chan,
> +							   pix->pixelformat);
> +	}
> +
> +	/* Change this when start adding interlace format support */
> +	pix->field = V4L2_FIELD_NONE;
> +	fmt.which = V4L2_SUBDEV_FORMAT_TRY;
> +	fmt.pad = 0;
> +	v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
> +	v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);

As fas as I understand, entities formats should be independent, it is up to link_validate
to check formats between entities.
The capture shouldn't change the format of the subdevice.


> +
> +	v4l2_fill_pix_format(pix, &fmt.format);
> +	tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
> +				&pix->bytesperline);
> +	pix->sizeimage = pix->bytesperline * pix->height;
> +
> +	if (vfmt)
> +		*vfmt = fmt_info;
> +
> +	v4l2_subdev_free_pad_config(pad_cfg);
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_try_format(struct file *file, void *fh,
> +				    struct v4l2_format *format)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +
> +	return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
> +}
> +
> +static int tegra_channel_set_format(struct file *file, void *fh,
> +				    struct v4l2_format *format)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +	const struct tegra_video_format *info;
> +	int ret;
> +	struct v4l2_subdev_format fmt;
> +	struct v4l2_subdev *subdev;
> +	struct v4l2_pix_format *pix = &format->fmt.pix;
> +
> +	if (vb2_is_busy(&chan->queue))
> +		return -EBUSY;
> +
> +	/* get supported format by try_fmt */
> +	ret = __tegra_channel_try_format(chan, pix, &info);
> +	if (ret)
> +		return ret;
> +
> +	subdev = tegra_channel_get_remote_subdev(chan);
> +
> +	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> +	fmt.pad = 0;
> +	v4l2_fill_mbus_format(&fmt.format, pix, info->code);
> +	v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);

same here.

> +
> +	v4l2_fill_pix_format(pix, &fmt.format);
> +	chan->format = *pix;
> +	chan->fmtinfo = info;
> +	tegra_channel_update_format(chan, pix->width,
> +				    pix->height, info->fourcc,
> +				    &info->bpp,
> +				    pix->bytesperline);
> +	*pix = chan->format;
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_enum_input(struct file *file, void *fh,
> +				    struct v4l2_input *inp)
> +{
> +	/* Currently driver supports internal TPG only */
> +	if (inp->index != 0)

just
if (inp->index)

> +		return -EINVAL;
> +
> +	inp->type = V4L2_INPUT_TYPE_CAMERA;
> +	strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_g_input(struct file *file, void *priv,
> +				 unsigned int *i)
> +{
> +	*i = 0;
> +	return 0;
> +}
> +
> +static int tegra_channel_s_input(struct file *file, void *priv,
> +				 unsigned int input)
> +{
> +	if (input > 0)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops tegra_channel_ioctl_ops = {
> +	.vidioc_querycap		= tegra_channel_querycap,
> +	.vidioc_enum_fmt_vid_cap	= tegra_channel_enum_format,
> +	.vidioc_g_fmt_vid_cap		= tegra_channel_get_format,
> +	.vidioc_s_fmt_vid_cap		= tegra_channel_set_format,
> +	.vidioc_try_fmt_vid_cap		= tegra_channel_try_format,
> +	.vidioc_enum_input		= tegra_channel_enum_input,
> +	.vidioc_g_input			= tegra_channel_g_input,
> +	.vidioc_s_input			= tegra_channel_s_input,
> +	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
> +	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
> +	.vidioc_querybuf		= vb2_ioctl_querybuf,
> +	.vidioc_qbuf			= vb2_ioctl_qbuf,
> +	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
> +	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
> +	.vidioc_expbuf			= vb2_ioctl_expbuf,
> +	.vidioc_streamon		= vb2_ioctl_streamon,
> +	.vidioc_streamoff		= vb2_ioctl_streamoff,
> +	.vidioc_subscribe_event		= v4l2_ctrl_subscribe_event,
> +	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
> +};
> +
> +/*
> + * V4L2 file operations
> + */
> +static const struct v4l2_file_operations tegra_channel_fops = {
> +	.owner		= THIS_MODULE,
> +	.unlocked_ioctl	= video_ioctl2,
> +	.open		= v4l2_fh_open,
> +	.release	= vb2_fop_release,
> +	.read		= vb2_fop_read,
> +	.poll		= vb2_fop_poll,
> +	.mmap		= vb2_fop_mmap,
> +};
> +
> +int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan)
> +{
> +	int ret;
> +
> +	/* Add test pattern control handler to v4l2 device */
> +	v4l2_ctrl_new_std_menu_items(&chan->ctrl_handler, &vi_ctrl_ops,
> +				     V4L2_CID_TEST_PATTERN,
> +				     ARRAY_SIZE(vi_pattern_strings) - 1,
> +				     0, 0, vi_pattern_strings);
> +	if (chan->ctrl_handler.error) {
> +		dev_err(chan->vi->dev, "failed to add TPG ctrl handler\n");
> +		v4l2_ctrl_handler_free(&chan->ctrl_handler);
> +		return chan->ctrl_handler.error;
> +	}
> +
> +	/* setup the controls */
> +	ret = v4l2_ctrl_handler_setup(&chan->ctrl_handler);
> +	if (ret < 0) {
> +		dev_err(chan->vi->dev, "failed to setup v4l2 ctrl handler\n");
> +		goto free_hdl;
> +	}
> +
> +	return 0;
> +
> +free_hdl:
> +	v4l2_ctrl_handler_free(&chan->ctrl_handler);
> +	return ret;
> +}
> +
> +int tegra_channel_init(struct tegra_channel *chan)
> +{
> +	struct tegra_vi *vi = chan->vi;
> +	struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
> +	int ret;
> +
> +	mutex_init(&chan->video_lock);
> +	INIT_LIST_HEAD(&chan->capture);
> +	INIT_LIST_HEAD(&chan->done);
> +	spin_lock_init(&chan->start_lock);
> +	spin_lock_init(&chan->done_lock);
> +	init_waitqueue_head(&chan->start_wait);
> +	init_waitqueue_head(&chan->done_wait);
> +
> +	/* Default alignments */
> +	chan->width_align = TEGRA_WIDTH_ALIGNMENT;
> +	chan->stride_align = TEGRA_STRIDE_ALIGNMENT;
> +	chan->height_align = TEGRA_HEIGHT_ALIGNMENT;
> +	chan->size_align = TEGRA_SIZE_ALIGNMENT;
> +
> +	/* initialize the video format */
> +	chan->fmtinfo = tegra_core_get_default_format();
> +	chan->format.colorspace = V4L2_COLORSPACE_SRGB;
> +	chan->format.field = V4L2_FIELD_NONE;
> +	tegra_channel_update_format(chan, TEGRA_DEF_WIDTH, TEGRA_DEF_HEIGHT,
> +				    chan->fmtinfo->fourcc,
> +				    &chan->fmtinfo->bpp, 0);
> +
> +	/* initialize the media entity */
> +	chan->pad.flags = MEDIA_PAD_FL_SINK;
> +	ret = media_entity_pads_init(&chan->video.entity, 1, &chan->pad);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = v4l2_ctrl_handler_init(&chan->ctrl_handler, MAX_CID_CONTROLS);
> +	if (chan->ctrl_handler.error) {
> +		dev_err(vi->dev,
> +			"V4L2 controls handler init failed: %d\n", ret);
> +		goto ctrl_init_error;
> +	}
> +
> +	/* initialize the video_device */
> +	chan->video.fops = &tegra_channel_fops;
> +	chan->video.v4l2_dev = &cam->v4l2_dev;
> +	chan->video.queue = &chan->queue;
> +	snprintf(chan->video.name, sizeof(chan->video.name), "%s-%s-%u",
> +		 dev_name(vi->dev), "output", chan->port);
> +	chan->video.vfl_type = VFL_TYPE_GRABBER;
> +	chan->video.vfl_dir = VFL_DIR_RX;
> +	chan->video.release = video_device_release_empty;
> +	chan->video.ioctl_ops = &tegra_channel_ioctl_ops;
> +	chan->video.ctrl_handler = &chan->ctrl_handler;
> +	chan->video.lock = &chan->video_lock;
> +	chan->video.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> +				  V4L2_CAP_READWRITE;
> +
> +	video_set_drvdata(&chan->video, chan);
> +	chan->sp = host1x_syncpt_request(&vi->client, HOST1X_SYNCPT_HAS_BASE);
> +	if (!chan->sp) {
> +		dev_err(vi->dev, "failed to request syncpoint\n");
> +		ret = -ENOMEM;
> +		goto host1x_sp_error;
> +	}
> +
> +	chan->queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	chan->queue.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
> +	chan->queue.lock = &chan->video_lock;
> +	chan->queue.drv_priv = chan;
> +	chan->queue.buf_struct_size = sizeof(struct tegra_channel_buffer);
> +	chan->queue.ops = &tegra_channel_queue_qops;
> +	chan->queue.mem_ops = &vb2_dma_contig_memops;
> +	chan->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
> +				   | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;
> +	chan->queue.dev = vi->dev;
> +	ret = vb2_queue_init(&chan->queue);
> +	if (ret < 0) {
> +		dev_err(vi->dev,
> +			"failed to initialize VB2 queue, err: %d\n", ret);
> +		goto vb2_init_error;
> +	}
> +
> +	ret = video_register_device(&chan->video, VFL_TYPE_GRABBER, -1);
> +	if (ret < 0) {
> +		dev_err(&chan->video.dev,
> +			"failed to register video device, err: %d\n", ret);
> +		goto video_register_error;
> +	}
> +
> +	return 0;
> +
> +video_register_error:
> +	vb2_queue_release(&chan->queue);
> +vb2_init_error:
> +	host1x_syncpt_free(chan->sp);
> +host1x_sp_error:
> +	v4l2_ctrl_handler_free(&chan->ctrl_handler);
> +ctrl_init_error:
> +	media_entity_cleanup(&chan->video.entity);
> +	return ret;
> +}
> +
> +int tegra_channel_cleanup(struct tegra_channel *chan)
> +{
> +	if (video_is_registered(&chan->video)) {
> +		video_unregister_device(&chan->video);
> +		vb2_queue_release(&chan->queue);
> +		media_entity_cleanup(&chan->video.entity);
> +	}
> +
> +	host1x_syncpt_free(chan->sp);
> +	v4l2_ctrl_handler_free(&chan->ctrl_handler);
> +
> +	return 0;
> +}
> diff --git a/drivers/staging/media/tegra/tegra-core.c b/drivers/staging/media/tegra/tegra-core.c
> new file mode 100644
> index 000000000000..80ede3ad7266
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-core.c
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/export.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#include "mc_common.h"
> +#include "tegra-core.h"
> +
> +static const struct tegra_video_format tegra_default_format = {
> +	/* RAW 10 */
> +	TEGRA_VF_RAW10,
> +	10,
> +	MEDIA_BUS_FMT_SRGGB10_1X10,
> +	{2, 1},
> +	TEGRA_IMAGE_FORMAT_DEF,
> +	TEGRA_IMAGE_DT_RAW10,
> +	V4L2_PIX_FMT_SRGGB10,
> +	"RGRG.. GBGB..",

It would be more readable to do:

.code = TEGRA_VF_RAW10,
.width = 10,
.code = MEDIA_BUS_FMT_SRGGB10_1X10,

and so on

> +};
> +
> +/*
> + * Helper functions
> + */
> +
> +/**
> + * tegra_core_get_default_format - Get default format
> + *
> + * Return: pointer to the format where the default format needs
> + * to be filled in.
> + */
> +const struct tegra_video_format *tegra_core_get_default_format(void)
> +{
> +	return &tegra_default_format;
> +}

This is only used in tegra-channel.c, why not to declare it there as static?

> +
> +/**
> + * tegra_core_get_fourcc_by_idx - get fourcc of a tegra_video format
> + * @index: array index of the tegra_video_formats
> + *
> + * Return: fourcc code
> + */
> +u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
> +				 unsigned int index)

same here

> +{
> +	if (index >= chan->nformats)
> +		return -EINVAL;
> +
> +	return chan->video_formats[index].fourcc;
> +}
> +
> +/**
> + * tegra_core_get_word_count - Calculate word count
> + * @frame_width: number of pixels per line
> + * @fmt: Tegra Video format struct which has BPP information
> + *
> + * Return: word count number
> + */
> +u32 tegra_core_get_word_count(unsigned int frame_width,
> +			      const struct tegra_video_format *fmt)

This is only used in vi2_fops.c, can be declared there as static.

> +{
> +	return frame_width * fmt->width / 8;
> +}
> +
> +/**
> + * tegra_core_get_idx_by_code - Retrieve index for a media bus code
> + * @chan: tegra_channel
> + * @code: the format media bus code
> + * @offset: offset in video formats from where to start the search
> + *
> + * Return: a index to the format information structure corresponding to the
> + * given V4L2 media bus format @code, or -1 if no corresponding format can
> + * be found.
> + */
> +int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
> +			       unsigned int offset)

same here, this is only used by tegra-vi.c

Please, check the other functions too, if a function is
used only in one place, no need to export it in a header.

> +{
> +	unsigned int i;
> +
> +	for (i = offset; i < chan->nformats; ++i) {
> +		if (chan->video_formats[i].code == code)
> +			return i;
> +	}
> +
> +	return -1;
> +}
> +
> +/**
> + * tegra_core_get_format_by_fourcc - Retrieve format information for a 4CC
> + * @fourcc: the format 4CC
> + *
> + * Return: a pointer to the format information structure corresponding to the
> + * given V4L2 format @fourcc, or NULL if no corresponding format can be
> + * found.
> + */
> +const struct tegra_video_format *
> +tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc)
> +{

same here, only used by tegra-channel.c

> +	unsigned int i;
> +
> +	for (i = 0; i < chan->nformats; ++i) {
> +		if (chan->video_formats[i].fourcc == fourcc)
> +			return &chan->video_formats[i];
> +	}
> +
> +	return NULL;
> +}
> diff --git a/drivers/staging/media/tegra/tegra-core.h b/drivers/staging/media/tegra/tegra-core.h
> new file mode 100644
> index 000000000000..193065d20a95
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-core.h
> @@ -0,0 +1,125 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __TEGRA_CORE_H__
> +#define __TEGRA_CORE_H__
> +
> +#include <media/v4l2-subdev.h>
> +
> +/* Minimum and maximum width and height common to Tegra video input device. */
> +#define TEGRA_MIN_WIDTH		32U
> +#define TEGRA_MAX_WIDTH		32768U
> +#define TEGRA_MIN_HEIGHT	32U
> +#define TEGRA_MAX_HEIGHT	32768U
> +
> +/* Width alignment */
> +#define TEGRA_WIDTH_ALIGNMENT	1
> +/* Stride alignment */
> +#define TEGRA_STRIDE_ALIGNMENT	1
> +/* Height alignment */
> +#define TEGRA_HEIGHT_ALIGNMENT	1
> +/* Size alignment */
> +#define TEGRA_SIZE_ALIGNMENT	1
> +
> +/* 1080p resolution as default resolution for test pattern generator */
> +#define TEGRA_DEF_WIDTH		1920
> +#define TEGRA_DEF_HEIGHT	1080
> +
> +#define TEGRA_VF_DEF		MEDIA_BUS_FMT_SRGGB10_1X10
> +#define TEGRA_IMAGE_FORMAT_DEF	32
> +
> +/*
> + * These go into the TEGRA_VI_CSI_n_CSI_IMAGE_DT registers bits 7:0
> + * Input data type of VI channel.
> + */
> +enum tegra_image_dt {
> +	TEGRA_IMAGE_DT_YUV420_8 = 24,
> +	TEGRA_IMAGE_DT_YUV420_10,
> +
> +	TEGRA_IMAGE_DT_YUV420CSPS_8 = 28,
> +	TEGRA_IMAGE_DT_YUV420CSPS_10,
> +	TEGRA_IMAGE_DT_YUV422_8,
> +	TEGRA_IMAGE_DT_YUV422_10,
> +	TEGRA_IMAGE_DT_RGB444,
> +	TEGRA_IMAGE_DT_RGB555,
> +	TEGRA_IMAGE_DT_RGB565,
> +	TEGRA_IMAGE_DT_RGB666,
> +	TEGRA_IMAGE_DT_RGB888,
> +
> +	TEGRA_IMAGE_DT_RAW6 = 40,
> +	TEGRA_IMAGE_DT_RAW7,
> +	TEGRA_IMAGE_DT_RAW8,
> +	TEGRA_IMAGE_DT_RAW10,
> +	TEGRA_IMAGE_DT_RAW12,
> +	TEGRA_IMAGE_DT_RAW14,
> +};
> +
> +/* Supported CSI to VI Data Formats */
> +enum tegra_vf_code {
> +	TEGRA_VF_RAW6 = 0,
> +	TEGRA_VF_RAW7,
> +	TEGRA_VF_RAW8,
> +	TEGRA_VF_RAW10,
> +	TEGRA_VF_RAW12,
> +	TEGRA_VF_RAW14,
> +	TEGRA_VF_EMBEDDED8,
> +	TEGRA_VF_RGB565,
> +	TEGRA_VF_RGB555,
> +	TEGRA_VF_RGB888,
> +	TEGRA_VF_RGB444,
> +	TEGRA_VF_RGB666,
> +	TEGRA_VF_YUV422,
> +	TEGRA_VF_YUV420,
> +	TEGRA_VF_YUV420_CSPS,
> +};
> +
> +/**
> + * struct tegra_frac
> + * @numerator: numerator of the fraction
> + * @denominator: denominator of the fraction
> + */
> +struct tegra_frac {
> +	unsigned int numerator;
> +	unsigned int denominator;
> +};
> +
> +/**
> + * struct tegra_video_format - Tegra video format description
> + * @vf_code: video format code
> + * @width: format width in bits per component
> + * @code: media bus format code
> + * @bpp: bytes per pixel (when stored in memory)
> + * @img_fmt: image format
> + * @img_dt: image data type
> + * @fourcc: V4L2 pixel format FCC identifier
> + * @description: format description, suitable for userspace
> + */
> +struct tegra_video_format {
> +	enum tegra_vf_code vf_code;
> +	unsigned int width;
> +	unsigned int code;
> +	struct tegra_frac bpp;
> +	u32 img_fmt;
> +	enum tegra_image_dt img_dt;
> +	u32 fourcc;
> +	__u8 description[32];
> +};
> +
> +#define	TEGRA_VIDEO_FORMAT(VF_CODE, BPP, MBUS_CODE, FRAC_BPP_NUM,	\
> +	FRAC_BPP_DEN, FORMAT, DATA_TYPE, FOURCC, DESCRIPTION)		\
> +{									\
> +	TEGRA_VF_##VF_CODE,						\
> +	BPP,								\
> +	MEDIA_BUS_FMT_##MBUS_CODE,					\
> +	{FRAC_BPP_NUM, FRAC_BPP_DEN},					\
> +	TEGRA_IMAGE_FORMAT_##FORMAT,					\
> +	TEGRA_IMAGE_DT_##DATA_TYPE,					\
> +	V4L2_PIX_FMT_##FOURCC,						\
> +	DESCRIPTION,							\
> +}
> +
> +u32 tegra_core_get_word_count(unsigned int frame_width,
> +			      const struct tegra_video_format *fmt);
> +#endif
> diff --git a/drivers/staging/media/tegra/tegra-csi.c b/drivers/staging/media/tegra/tegra-csi.c
> new file mode 100644
> index 000000000000..f6153acd60cb
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-csi.c
> @@ -0,0 +1,380 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk/tegra.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/host1x.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> +
> +#include "csi.h"
> +#include "mc_common.h"
> +#include "csi2_fops.h"
> +#include "host1x-video.h"
> +#include "vi2_registers.h"
> +
> +static inline struct tegra_csi_device *
> +host1x_client_to_csi(struct host1x_client *client)
> +{
> +	return container_of(client, struct tegra_csi_device, client);
> +}
> +
> +static inline struct tegra_csi_channel *to_csi_chan(struct v4l2_subdev *subdev)
> +{
> +	return container_of(subdev, struct tegra_csi_channel, subdev);
> +}
> +
> +/*
> + * V4L2 Subdevice Video Operations
> + */
> +static int tegra_csi_s_stream(struct v4l2_subdev *subdev, int enable)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	struct tegra_channel *chan = subdev->host_priv;
> +	u8 pg_mode = chan->vi->pg_mode;
> +
> +	return csi->fops->csi_start_streaming(csi_chan, pg_mode, enable);
> +}
> +
> +/*
> + * Only use this subdevice media bus ops for test pattern generator,
> + * because CSI device is an separated subdevice which has 6 source
> + * pads to generate test pattern.
> + */
> +static struct v4l2_mbus_framefmt tegra_csi_tpg_fmts[] = {
> +	{
> +		TEGRA_DEF_WIDTH,
> +		TEGRA_DEF_HEIGHT,
> +		MEDIA_BUS_FMT_SRGGB10_1X10,
> +		V4L2_FIELD_NONE,
> +		V4L2_COLORSPACE_SRGB
> +	},
> +	{
> +		TEGRA_DEF_WIDTH,
> +		TEGRA_DEF_HEIGHT,
> +		MEDIA_BUS_FMT_RGB888_1X32_PADHI,
> +		V4L2_FIELD_NONE,
> +		V4L2_COLORSPACE_SRGB
> +	}
> +
> +};
> +
> +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
> +	{1280, 720},
> +	{1920, 1080},
> +	{3840, 2160},
> +};
> +
> +/*
> + * V4L2 Subdevice Pad Operations
> + */
> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
> +				struct v4l2_subdev_pad_config *cfg,
> +				struct v4l2_subdev_format *fmt)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +
> +	mutex_lock(&csi_chan->format_lock);

Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).

> +	memcpy(fmt, &csi_chan->ports->format,
> +	       sizeof(struct v4l2_mbus_framefmt));

I would prefer just:
*fmt = *csi_chan->ports->format;

I think it is easier to read IMHO.
same in tegra_csi_set_format().

> +	mutex_unlock(&csi_chan->format_lock);
> +
> +	return 0;
> +}
> +
> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
> +				   struct v4l2_mbus_framefmt *mfmt)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	const struct v4l2_frmsize_discrete *sizes;
> +	int i, j;

unsigned

> +
> +	for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
> +		struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
> +
> +		if (mfmt->code == mbus_fmt->code) {
> +			for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
> +				sizes = &tegra_csi_tpg_sizes[j];
> +				if (mfmt->width == sizes->width &&
> +				    mfmt->height == sizes->height) {
> +					return;
> +				}
> +			}
> +		}
> +
> +		dev_info(csi->dev, "using Tegra default RAW10 video format\n");
> +	}
> +
> +	dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
> +	memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
> +}
> +
> +static int tegra_csi_set_format(struct v4l2_subdev *subdev,
> +				struct v4l2_subdev_pad_config *cfg,
> +				struct v4l2_subdev_format *fmt)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +	struct v4l2_mbus_framefmt *format = &fmt->format;
> +
> +	tegra_csi_try_mbus_fmt(subdev, format);
> +
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> +		return 0;
> +
> +	mutex_lock(&csi_chan->format_lock);
> +	memcpy(&csi_chan->ports->format, format,
> +	       sizeof(struct v4l2_mbus_framefmt));
> +	mutex_unlock(&csi_chan->format_lock);
> +
> +	return 0;
> +}
> +
> +/*
> + * V4L2 Subdevice Operations
> + */
> +static struct v4l2_subdev_video_ops tegra_csi_video_ops = {
> +	.s_stream = tegra_csi_s_stream,
> +};
> +
> +static struct v4l2_subdev_pad_ops tegra_csi_pad_ops = {
> +	.get_fmt		= tegra_csi_get_format,
> +	.set_fmt		= tegra_csi_set_format,
> +};
> +
> +static struct v4l2_subdev_ops tegra_csi_ops = {
> +	.video  = &tegra_csi_video_ops,
> +	.pad    = &tegra_csi_pad_ops,
> +};
> +
> +/*
> + * Media Operations
> + */
> +static const struct media_entity_operations tegra_csi_media_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static int tegra_csi_tpg_channels_alloc(struct tegra_csi_device *csi)
> +{
> +	struct device_node *node = csi->dev->of_node;
> +	unsigned int port_num;
> +	int ret;
> +	struct tegra_csi_channel *item;
> +	unsigned int tpg_channels = csi->soc_data->num_tpg_channels;
> +
> +	/* allocate CSI channel for each CSI x2 ports */
> +	for (port_num = 0; port_num < tpg_channels; port_num++) {
> +		item = devm_kzalloc(csi->dev, sizeof(*item), GFP_KERNEL);
> +		if (!item) {
> +			ret = -ENOMEM;
> +			goto error;
> +		}
> +
> +		list_add_tail(&item->list, &csi->csi_chans);
> +		item->csi = csi;
> +		item->csi_port_num = port_num;
> +		item->numlanes = 2;
> +		item->of_node = node;
> +		item->numpads = 1;
> +		item->pads[0].flags = MEDIA_PAD_FL_SOURCE;
> +	}
> +
> +	return 0;
> +
> +error:
> +	list_for_each_entry(item, &csi->csi_chans, list)
> +		list_del(&item->list);
> +
> +	return ret;
> +}
> +
> +static int tegra_csi_channel_init(struct tegra_csi_channel *chan)
> +{
> +	struct tegra_csi_device *csi = chan->csi;
> +	struct v4l2_subdev *subdev;
> +	int ret;
> +
> +	chan->ports = devm_kzalloc(csi->dev, sizeof(struct tegra_csi_port),
> +				   GFP_KERNEL);
> +	if (!chan->ports)
> +		return -ENOMEM;
> +
> +	mutex_init(&chan->format_lock);
> +
> +	/* initialize the default format */
> +	chan->ports->format.code = TEGRA_VF_DEF;
> +	chan->ports->format.field = V4L2_FIELD_NONE;
> +	chan->ports->format.colorspace = V4L2_COLORSPACE_SRGB;
> +	chan->ports->format.width = TEGRA_DEF_WIDTH;
> +	chan->ports->format.height = TEGRA_DEF_HEIGHT;
> +	chan->ports->lanes = chan->numlanes;
> +
> +	/* initialize V4L2 subdevice and media entity */
> +	subdev = &chan->subdev;
> +	v4l2_subdev_init(subdev, &tegra_csi_ops);
> +	subdev->dev = csi->dev;
> +	snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "%s-%d", "tpg",
> +		 chan->csi_port_num);
> +
> +	v4l2_set_subdevdata(subdev, chan);
> +	subdev->fwnode = of_fwnode_handle(chan->of_node);
> +	subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	subdev->entity.ops = &tegra_csi_media_ops;
> +
> +	/* initialize media entity pads */
> +	ret = media_entity_pads_init(&subdev->entity, chan->numpads,
> +				     chan->pads);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = v4l2_async_register_subdev(subdev);
> +	if (ret < 0) {
> +		dev_err(csi->dev, "failed to register subdev\n");
> +		media_entity_cleanup(&subdev->entity);
> +	}
> +
> +	return ret;
> +}
> +
> +void tegra_csi_error_status(struct v4l2_subdev *subdev)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +
> +	csi->fops->csi_err_status(csi_chan);
> +}
> +EXPORT_SYMBOL(tegra_csi_error_status);
> +
> +static int tegra_csi_init(struct host1x_client *client)
> +{
> +	struct tegra_csi_device *csi = host1x_client_to_csi(client);
> +	struct tegra_camera *cam = dev_get_drvdata(client->host);
> +	struct tegra_csi_channel *item;
> +	int ret;
> +
> +	cam->csi = csi;
> +
> +	INIT_LIST_HEAD(&csi->csi_chans);
> +
> +	ret = tegra_csi_tpg_channels_alloc(csi);
> +	if (ret < 0)
> +		return ret;
> +
> +	list_for_each_entry(item, &csi->csi_chans, list) {
> +		ret = tegra_csi_channel_init(item);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = csi->fops->hw_init(csi);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int tegra_csi_exit(struct host1x_client *client)
> +{
> +	struct tegra_camera *cam = dev_get_drvdata(client->host);
> +	struct v4l2_subdev *subdev;
> +	struct tegra_csi_channel *chan;
> +
> +	if (!cam->csi)
> +		return 0;
> +
> +	list_for_each_entry(chan, &cam->csi->csi_chans, list) {
> +		mutex_destroy(&chan->format_lock);
> +		subdev = &chan->subdev;
> +		media_entity_cleanup(&subdev->entity);
> +		v4l2_async_unregister_subdev(subdev);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct host1x_client_ops csi_client_ops = {
> +	.init = tegra_csi_init,
> +	.exit = tegra_csi_exit,
> +};
> +
> +static int tegra_csi_probe(struct platform_device *pdev)
> +{
> +	struct tegra_csi_device *csi;
> +	struct resource *res;
> +	int ret;
> +
> +	csi = devm_kzalloc(&pdev->dev, sizeof(*csi), GFP_KERNEL);
> +	if (!csi)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	csi->iomem = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(csi->iomem))
> +		return PTR_ERR(csi->iomem);
> +
> +	csi->soc_data = of_device_get_match_data(&pdev->dev);
> +	if (!csi->soc_data) {
> +		dev_info(&pdev->dev, "No platform data\n\n");
> +		return -ENODATA;
> +	}
> +
> +	csi->dev = &pdev->dev;
> +	csi->fops = csi->soc_data->csi_fops;
> +	platform_set_drvdata(pdev, csi);
> +
> +	/* initialize host1x interface */
> +	INIT_LIST_HEAD(&csi->client.list);
> +	csi->client.ops = &csi_client_ops;
> +	csi->client.dev = &pdev->dev;
> +
> +	ret = host1x_client_register(&csi->client);
> +	if (ret < 0) {
> +		dev_err(csi->dev, "failed to register host1x client: %d\n",
> +			ret);
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tegra_csi_remove(struct platform_device *pdev)
> +{
> +	struct tegra_csi_device *csi = platform_get_drvdata(pdev);
> +
> +	host1x_client_unregister(&csi->client);
> +
> +	return 0;
> +}
> +
> +static struct tegra_csi_soc_data tegra210_csi_data = {
> +	.csi_fops = &csi2_fops,
> +	.cil_max_clk_hz = TEGRA210_CSI_CIL_CLK_MAX,
> +	.num_tpg_channels = TEGRA210_MAX_CHANNELS,
> +};
> +
> +static const struct of_device_id tegra_csi_of_id_table[] = {
> +	{ .compatible = "nvidia,tegra210-csi", .data = &tegra210_csi_data },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, tegra_csi_of_id_table);
> +
> +struct platform_driver tegra_csi_driver = {
> +	.driver = {
> +		.name		= "tegra-csi",
> +		.of_match_table	= tegra_csi_of_id_table,
> +	},
> +	.probe			= tegra_csi_probe,
> +	.remove			= tegra_csi_remove,
> +};
> +
> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
> +MODULE_DESCRIPTION("NVIDIA Tegra CSI Device Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/media/tegra/tegra-vi.c b/drivers/staging/media/tegra/tegra-vi.c
> new file mode 100644
> index 000000000000..6f5950b7988e
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-vi.c
> @@ -0,0 +1,351 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/host1x.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-fwnode.h>
> +
> +#include <soc/tegra/pmc.h>
> +
> +#include "host1x-video.h"
> +#include "mc_common.h"
> +#include "vi2_formats.h"
> +#include "vi2_registers.h"
> +#include "vi2_fops.h"
> +#include "tegra-vi.h"
> +
> +static inline struct tegra_vi *
> +host1x_client_to_vi(struct host1x_client *client)
> +{
> +	return container_of(client, struct tegra_vi, client);
> +}
> +
> +/* VI only support 2 formats in TPG mode */
> +static void vi_tpg_fmts_bitmap_init(struct tegra_channel *chan)
> +{
> +	int index;
> +
> +	bitmap_zero(chan->tpg_fmts_bitmap, MAX_FORMAT_NUM);
> +
> +	index = tegra_core_get_idx_by_code(chan,
> +					   MEDIA_BUS_FMT_SRGGB10_1X10, 0);
> +	bitmap_set(chan->tpg_fmts_bitmap, index, 1);
> +
> +	index = tegra_core_get_idx_by_code(chan,
> +					   MEDIA_BUS_FMT_RGB888_1X32_PADHI, 0);
> +	bitmap_set(chan->tpg_fmts_bitmap, index, 1);
> +}
> +
> +int tegra_vi_power_on(struct tegra_vi *vi)
> +{
> +	int ret;
> +
> +	ret = regulator_enable(vi->vi_reg);
> +	if (ret)
> +		return ret;
> +
> +	ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_VENC,
> +						vi->vi_clk, vi->vi_rst);
> +	if (ret) {
> +		dev_err(vi->dev, "failed to power up!\n");
> +		goto error_power_up;
> +	}
> +
> +	ret = clk_set_rate(vi->vi_clk, vi->soc_data->vi_max_clk_hz);
> +	if (ret) {
> +		dev_err(vi->dev, "failed to set vi clk rate, err: %d\n", ret);
> +		goto error_clk_set_rate;
> +	}
> +
> +	ret = clk_prepare_enable(vi->vi_clk);
> +	if (ret) {
> +		dev_err(vi->dev, "failed to enable vi clk, err: %d\n", ret);
> +		goto error_clk_set_rate;
> +	}
> +
> +	return 0;
> +
> +error_clk_set_rate:
> +	tegra_powergate_power_off(TEGRA_POWERGATE_VENC);
> +
> +error_power_up:
> +	regulator_disable(vi->vi_reg);
> +
> +	return ret;
> +}
> +
> +void tegra_vi_power_off(struct tegra_vi *vi)
> +{
> +	reset_control_assert(vi->vi_rst);
> +	clk_disable_unprepare(vi->vi_clk);
> +	tegra_powergate_power_off(TEGRA_POWERGATE_VENC);
> +	regulator_disable(vi->vi_reg);
> +}
> +
> +static int tegra_vi_tpg_channels_alloc(struct tegra_vi *vi)
> +{
> +	struct tegra_channel *chan;
> +	unsigned int port_num;
> +	const struct tegra_video_format *video_formats;
> +	unsigned int nformats = vi->soc_data->nformats;
> +	unsigned int nchannels = vi->soc_data->vi_max_channels;
> +
> +	video_formats = devm_kcalloc(vi->dev, nformats, sizeof(*video_formats),
> +				     GFP_KERNEL);
> +	if (!video_formats)
> +		return -ENOMEM;
> +
> +	video_formats = vi->soc_data->video_formats;
> +
> +	for (port_num = 0; port_num < nchannels; port_num++) {
> +		chan = devm_kzalloc(vi->dev, sizeof(*chan), GFP_KERNEL);
> +		if (!chan)
> +			return -ENOMEM;
> +
> +		list_add_tail(&chan->list, &vi->vi_chans);
> +		chan->vi = vi;
> +		chan->port = port_num;
> +		chan->nformats = nformats;
> +		chan->video_formats = video_formats;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tegra_vi_channels_init(struct tegra_vi *vi)
> +{
> +	struct tegra_channel *chan;
> +	int ret;
> +
> +	list_for_each_entry(chan, &vi->vi_chans, list) {
> +		ret = tegra_channel_init(chan);
> +		if (ret < 0) {
> +			dev_err(vi->dev, "channel %d init failed\n",
> +				chan->port);
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int tegra_vi_channels_cleanup(struct tegra_vi *vi)
> +{
> +	struct tegra_channel *chan;
> +
> +	list_for_each_entry(chan, &vi->vi_chans, list)
> +		tegra_channel_cleanup(chan);
> +
> +	return 0;
> +}
> +
> +static int tegra_vi_tpg_graph_init(struct tegra_vi *vi)
> +{
> +	struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
> +	struct tegra_csi_device *csi = cam->csi;
> +	struct tegra_channel *vi_chan;
> +	struct tegra_csi_channel *csi_chan;
> +	u32 link_flags = MEDIA_LNK_FL_ENABLED;
> +	int ret = 0;
> +
> +	csi_chan = list_first_entry(&csi->csi_chans, struct tegra_csi_channel,
> +				    list);
> +
> +	list_for_each_entry(vi_chan, &vi->vi_chans, list) {
> +		struct media_entity *source = &csi_chan->subdev.entity;
> +		struct media_entity *sink = &vi_chan->video.entity;
> +		struct media_pad *source_pad = csi_chan->pads;
> +		struct media_pad *sink_pad = &vi_chan->pad;
> +
> +		ret = v4l2_device_register_subdev(&cam->v4l2_dev,
> +						  &csi_chan->subdev);
> +		if (ret) {
> +			dev_err(vi->dev, "failed to register subdev: %d\n",
> +				ret);
> +			goto register_fail;
> +		}
> +
> +		dev_dbg(vi->dev, "creating %s:%u -> %s:%u link\n",
> +			source->name, source_pad->index,
> +			sink->name, sink_pad->index);
> +
> +		ret = media_create_pad_link(source, source_pad->index,
> +					    sink, sink_pad->index,
> +					    link_flags);
> +		if (ret < 0) {
> +			dev_err(vi->dev,
> +				"failed to create %s:%u -> %s:%u link\n",
> +				source->name, source_pad->index,
> +				sink->name, sink_pad->index);
> +			goto register_fail;
> +		}
> +
> +		vi_tpg_fmts_bitmap_init(vi_chan);
> +		tegra_channel_setup_ctrl_handler(vi_chan);
> +
> +		csi_chan = list_next_entry(csi_chan, list);
> +	}
> +
> +	return 0;
> +
> +register_fail:
> +	list_for_each_entry(csi_chan, &csi->csi_chans, list)
> +		v4l2_device_unregister_subdev(&csi_chan->subdev);
> +
> +	return ret;
> +}
> +
> +static int tegra_vi_init(struct host1x_client *client)
> +{
> +	struct tegra_camera *cam = dev_get_drvdata(client->host);
> +	struct tegra_vi *vi = host1x_client_to_vi(client);
> +	int ret;
> +
> +	cam->vi = vi;
> +
> +	if (!cam->csi) {
> +		dev_err(vi->dev, "csi host1x client is not initialized\n");
> +		return -ENODEV;
> +	}
> +
> +	INIT_LIST_HEAD(&vi->vi_chans);
> +
> +	/* Create all TPG channels */
> +	ret = tegra_vi_tpg_channels_alloc(vi);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* initialize Tegra VI channels */
> +	ret = tegra_vi_channels_init(vi);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* Setup media links between Tegra VI and CSI for TPG */
> +	ret = tegra_vi_tpg_graph_init(vi);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int tegra_vi_exit(struct host1x_client *client)
> +{
> +	struct tegra_camera *cam = dev_get_drvdata(client->host);
> +
> +	if (cam->vi)
> +		tegra_vi_channels_cleanup(cam->vi);
> +
> +	return 0;
> +}
> +
> +static const struct host1x_client_ops vi_client_ops = {
> +	.init = tegra_vi_init,
> +	.exit = tegra_vi_exit,
> +};
> +
> +static int tegra_vi_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	struct tegra_vi *vi;
> +	int ret;
> +
> +	vi = devm_kzalloc(&pdev->dev, sizeof(*vi), GFP_KERNEL);
> +	if (!vi)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	vi->iomem = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(vi->iomem))
> +		return PTR_ERR(vi->iomem);
> +
> +	vi->soc_data = of_device_get_match_data(&pdev->dev);
> +	if (!vi->soc_data) {
> +		dev_info(&pdev->dev, "No platform data\n\n");
> +		return -ENODATA;
> +	}
> +
> +	vi->vi_rst = devm_reset_control_get(&pdev->dev, "vi");
> +	if (IS_ERR(vi->vi_rst)) {
> +		dev_err(&pdev->dev, "Failed to get vi reset\n");
> +		return PTR_ERR(vi->vi_rst);
> +	}
> +
> +	vi->vi_clk = devm_clk_get(&pdev->dev, "vi");
> +	if (IS_ERR(vi->vi_clk)) {
> +		dev_err(&pdev->dev, "Failed to get vi clock\n");
> +		return PTR_ERR(vi->vi_clk);
> +	}
> +
> +	vi->vi_reg = devm_regulator_get(&pdev->dev, "avdd-dsi-csi");
> +	if (IS_ERR(vi->vi_reg)) {
> +		dev_err(&pdev->dev, "Failed to get avdd-dsi-csi regulators\n");
> +		return -EPROBE_DEFER;
> +	}
> +
> +	vi->dev = &pdev->dev;
> +	vi->fops = vi->soc_data->vi_fops;
> +	platform_set_drvdata(pdev, vi);
> +
> +	/* initialize host1x interface */
> +	INIT_LIST_HEAD(&vi->client.list);
> +	vi->client.ops = &vi_client_ops;
> +	vi->client.dev = &pdev->dev;
> +
> +	ret = host1x_client_register(&vi->client);
> +	if (ret < 0) {
> +		dev_err(vi->dev, "failed to register host1x client: %d\n",
> +			ret);
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tegra_vi_remove(struct platform_device *pdev)
> +{
> +	struct tegra_vi *vi = platform_get_drvdata(pdev);
> +
> +	host1x_client_unregister(&vi->client);
> +
> +	return 0;
> +}
> +
> +static const struct vi_tegra_soc_data tegra210_vi_data = {
> +	.video_formats = vi2_video_formats,
> +	.nformats = ARRAY_SIZE(vi2_video_formats),
> +	.vi_fops = &vi2_fops,
> +	.vi_max_clk_hz = TEGRA210_CLOCK_VI_MAX,
> +	.vi_max_channels = TEGRA210_MAX_CHANNELS,
> +};
> +
> +static const struct of_device_id tegra_vi_of_id_table[] = {
> +	{ .compatible = "nvidia,tegra210-vi", .data = &tegra210_vi_data },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, tegra_vi_of_id_table);
> +
> +struct platform_driver tegra_vi_driver = {
> +	.driver = {
> +		.name = "tegra-vi",
> +		.of_match_table = tegra_vi_of_id_table,
> +	},
> +	.probe = tegra_vi_probe,
> +	.remove = tegra_vi_remove,
> +};
> +
> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
> +MODULE_DESCRIPTION("NVIDIA Tegra Video Input Device Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/media/tegra/tegra-vi.h b/drivers/staging/media/tegra/tegra-vi.h
> new file mode 100644
> index 000000000000..62973cb62624
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-vi.h
> @@ -0,0 +1,101 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __TEGRA_VI_H__
> +#define __TEGRA_VI_H__
> +
> +#include <linux/host1x.h>
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/spinlock.h>
> +#include <linux/videodev2.h>
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#include "mc_common.h"
> +
> +enum tegra_vi_pg_mode {
> +	TEGRA_VI_PG_DISABLED = 0,
> +	TEGRA_VI_PG_DIRECT,
> +	TEGRA_VI_PG_PATCH,
> +};
> +
> +/**
> + * struct tegra_channel_buffer - video channel buffer
> + * @buf: vb2 buffer base object
> + * @queue: buffer list entry in the channel queued buffers list
> + * @chan: channel that uses the buffer
> + * @addr: Tegra IOVA buffer address for VI output
> + */
> +struct tegra_channel_buffer {
> +	struct tegra_channel *chan;
> +	struct vb2_v4l2_buffer buf;
> +	struct list_head queue;
> +	dma_addr_t addr;
> +};
> +
> +#define to_tegra_channel_buffer(vb) \
> +	container_of(vb, struct tegra_channel_buffer, buf)
> +
> +struct tegra_vi_fops {
> +	void (*vi_stride_align)(unsigned int *bpl);
> +	int (*vi_start_streaming)(struct vb2_queue *vq, u32 count);
> +	void (*vi_stop_streaming)(struct vb2_queue *vq);
> +};
> +
> +struct vi_tegra_soc_data {
> +	const struct tegra_video_format *video_formats;
> +	unsigned int nformats;
> +	const struct tegra_vi_fops *vi_fops;
> +	unsigned int vi_max_clk_hz;
> +	unsigned int vi_max_channels;
> +};
> +
> +/**
> + * struct tegra_vi - NVIDIA Tegra Video Input device structure
> + * @dev: device struct
> + * @client: host1x_client struct
> + *
> + * @iomem: register base
> + * @vi_clk: main clock for VI block
> + * @vi_rst: reset controller
> + * @vi_reg: regulator for VI hardware, normally it avdd_dsi_csi
> + * @power_on_refcnt: reference count for power on/off operations
> + *
> + * @soc_data: pointer to SoC data structure
> + * @fops: vi operations
> + *
> + * @channels: list of channels at the pipeline output and input
> + *
> + * @pg_mode: test pattern generator mode (disabled/direct/patch)
> + */
> +struct tegra_vi {
> +	struct device *dev;
> +	struct host1x_client client;
> +
> +	void __iomem *iomem;
> +	struct clk *vi_clk;
> +	struct reset_control *vi_rst;
> +	struct regulator *vi_reg;
> +	atomic_t power_on_refcnt;
> +
> +	const struct vi_tegra_soc_data *soc_data;
> +	const struct tegra_vi_fops *fops;
> +
> +	struct list_head vi_chans;
> +
> +	enum tegra_vi_pg_mode pg_mode;
> +};
> +
> +int tegra_vi_power_on(struct tegra_vi *vi);
> +void tegra_vi_power_off(struct tegra_vi *vi);
> +
> +#endif /* __TEGRA_VI_H__ */
> diff --git a/drivers/staging/media/tegra/vi2_fops.c b/drivers/staging/media/tegra/vi2_fops.c
> new file mode 100644
> index 000000000000..a12a662ceec6
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_fops.c
> @@ -0,0 +1,364 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __VI2_H__
> +#define __VI2_H__
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/freezer.h>
> +
> +#include "vi2_registers.h"
> +#include "vi2_formats.h"
> +#include "mc_common.h"
> +#include "vi2_fops.h"
> +#include "tegra-vi.h"
> +
> +static void tegra_channel_write(struct tegra_channel *chan,
> +				unsigned int addr, u32 val)
> +{
> +	writel(val, chan->vi->iomem + addr);
> +}
> +
> +static u32 tegra_channel_read(struct tegra_channel *chan,
> +			      unsigned int addr)
> +{
> +	return readl(chan->vi->iomem + addr);
> +}
> +
> +/* VI CSI registers accessors */
> +static void csi_write(struct tegra_channel *chan, unsigned int addr, u32 val)
> +{
> +	void __iomem *vi_csi_base;
> +
> +	vi_csi_base = chan->vi->iomem + TEGRA_VI_CSI_BASE(chan->port);
> +	writel(val, vi_csi_base + addr);
> +}
> +
> +static u32 csi_read(struct tegra_channel *chan, unsigned int addr)
> +{
> +	void __iomem *vi_csi_base;
> +
> +	vi_csi_base = chan->vi->iomem + TEGRA_VI_CSI_BASE(chan->port);
> +
> +	return readl(vi_csi_base + addr);
> +}
> +
> +/*
> + * Tegra channel frame setup and capture operations
> + */
> +static int tegra_channel_capture_setup(struct tegra_channel *chan)
> +{
> +	u32 height = chan->format.height;
> +	u32 width = chan->format.width;
> +	u32 format = chan->fmtinfo->img_fmt;
> +	u32 data_type = chan->fmtinfo->img_dt;
> +	u32 word_count = tegra_core_get_word_count(width, chan->fmtinfo);
> +
> +	csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, 0xFFFFFFFF);
> +	csi_write(chan, TEGRA_VI_CSI_IMAGE_DEF,
> +		  ((chan->vi->pg_mode ? 0 : 1) << BYPASS_PXL_TRANSFORM_OFFSET) |
> +		  (format << IMAGE_DEF_FORMAT_OFFSET) |
> +		  IMAGE_DEF_DEST_MEM);
> +	csi_write(chan, TEGRA_VI_CSI_IMAGE_DT, data_type);
> +	csi_write(chan, TEGRA_VI_CSI_IMAGE_SIZE_WC, word_count);
> +	csi_write(chan, TEGRA_VI_CSI_IMAGE_SIZE,
> +		  (height << IMAGE_SIZE_HEIGHT_OFFSET) | width);
> +
> +	return 0;
> +}
> +
> +static void tegra_channel_capture_error_status(struct tegra_channel *chan)
> +{
> +	u32 val;
> +
> +	val = csi_read(chan, TEGRA_VI_CSI_ERROR_STATUS);
> +	dev_err(&chan->video.dev, "TEGRA_VI_CSI_ERROR_STATUS 0x%08x\n", val);
> +	csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, val);
> +
> +	val = tegra_channel_read(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR);
> +	dev_err(&chan->video.dev, "TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR 0x%08x\n",
> +		val);
> +	tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR, val);
> +	tegra_channel_csi_error_status(chan);
> +}
> +
> +static int tegra_channel_capture_frame(struct tegra_channel *chan,
> +				       struct tegra_channel_buffer *buf)
> +{
> +	int err = 0;
> +	u32 thresh, value, frame_start;
> +	int bytes_per_line = chan->format.bytesperline;
> +
> +	/* program buffer address by using surface 0 */
> +	csi_write(chan, TEGRA_VI_CSI_SURFACE0_OFFSET_MSB, 0x0);
> +	csi_write(chan, TEGRA_VI_CSI_SURFACE0_OFFSET_LSB, buf->addr);
> +	csi_write(chan, TEGRA_VI_CSI_SURFACE0_STRIDE, bytes_per_line);
> +
> +	/* increase syncpoint max */
> +	thresh = host1x_syncpt_incr_max(chan->sp, 1);
> +
> +	/* program syncpoint */
> +	frame_start = VI_CSI_PP_FRAME_START(chan->port);
> +	value = VI_CFG_VI_INCR_SYNCPT_COND(frame_start) |
> +		host1x_syncpt_id(chan->sp);
> +	tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT, value);
> +
> +	csi_write(chan, TEGRA_VI_CSI_SINGLE_SHOT, SINGLE_SHOT_CAPTURE);
> +
> +	/* move buffer to capture done queue */
> +	spin_lock(&chan->done_lock);
> +	list_add_tail(&buf->queue, &chan->done);
> +	spin_unlock(&chan->done_lock);
> +
> +	/* wait up kthread for capture done */
> +	wake_up_interruptible(&chan->done_wait);
> +
> +	/* use syncpoint to wake up */
> +	err = host1x_syncpt_wait(chan->sp, thresh,
> +				 TEGRA_VI_SYNCPT_WAIT_TIMEOUT, &value);
> +	if (err) {
> +		dev_err(&chan->video.dev,
> +			"frame start syncpt timeout, err: %d\n", err);
> +		tegra_channel_capture_error_status(chan);
> +	}
> +
> +	return err;
> +}
> +
> +static int tegra_channel_capture_done(struct tegra_channel *chan,
> +				      struct tegra_channel_buffer *buf)
> +{
> +	struct vb2_v4l2_buffer *vb = &buf->buf;
> +	u32 thresh, value, mw_ack_done;
> +	int ret = 0;
> +
> +	/* increase syncpoint max */
> +	thresh = host1x_syncpt_incr_max(chan->sp, 1);
> +
> +	/* program syncpoint */
> +	mw_ack_done = VI_CSI_MW_ACK_DONE(chan->port);
> +	value = VI_CFG_VI_INCR_SYNCPT_COND(mw_ack_done) |
> +		host1x_syncpt_id(chan->sp);
> +	tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT, value);
> +
> +	if (!csi_read(chan, TEGRA_VI_CSI_SINGLE_SHOT))
> +		csi_write(chan, TEGRA_VI_CSI_SINGLE_SHOT, SINGLE_SHOT_CAPTURE);
> +
> +	/* use syncpoint to wake up */
> +	ret = host1x_syncpt_wait(chan->sp, thresh,
> +				 TEGRA_VI_SYNCPT_WAIT_TIMEOUT, &value);
> +	if (ret)
> +		dev_err(&chan->video.dev,
> +			"MW_ACK_DONE syncpoint timeout, err: %d\n", ret);
> +
> +	/* captured one frame */
> +	vb->sequence = chan->sequence++;
> +	vb->field = V4L2_FIELD_NONE;
> +	vb->vb2_buf.timestamp = ktime_get_ns();
> +	vb2_buffer_done(&vb->vb2_buf,
> +			ret < 0 ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> +
> +	return ret;
> +}
> +
> +static int chan_capture_kthread_start(void *data)
> +{
> +	struct tegra_channel *chan = data;
> +	struct tegra_channel_buffer *buf;
> +
> +	set_freezable();
> +
> +	while (1) {
> +		try_to_freeze();
> +
> +		wait_event_interruptible(chan->start_wait,
> +					 !list_empty(&chan->capture) ||
> +					 kthread_should_stop());
> +		if (kthread_should_stop())
> +			break;
> +
> +		spin_lock(&chan->start_lock);
> +		if (list_empty(&chan->capture)) {
> +			spin_unlock(&chan->start_lock);
> +			continue;
> +		}
> +
> +		buf = list_entry(chan->capture.next,
> +				 struct tegra_channel_buffer, queue);
> +		list_del_init(&buf->queue);
> +		spin_unlock(&chan->start_lock);
> +		tegra_channel_capture_frame(chan, buf);
> +	}
> +
> +	return 0;
> +}
> +
> +static int chan_capture_kthread_done(void *data)
> +{
> +	struct tegra_channel *chan = data;
> +	struct tegra_channel_buffer *buf;
> +
> +	set_freezable();
> +
> +	while (1) {
> +		try_to_freeze();
> +
> +		wait_event_interruptible(chan->done_wait,
> +					 !list_empty(&chan->done) ||
> +					 kthread_should_stop());
> +
> +		if (kthread_should_stop())
> +			break;
> +
> +		spin_lock(&chan->done_lock);
> +		if (list_empty(&chan->done)) {
> +			spin_unlock(&chan->done_lock);
> +			continue;
> +		}
> +
> +		buf = list_entry(chan->done.next, struct tegra_channel_buffer,
> +				 queue);
> +		list_del_init(&buf->queue);
> +		spin_unlock(&chan->done_lock);
> +		tegra_channel_capture_done(chan, buf);
> +	}
> +
> +	return 0;
> +}
> +
> +static void vi2_stride_align(unsigned int *bpl)
> +{
> +	*bpl = ((*bpl + (TEGRA210_SURFACE_ALIGNMENT) - 1) &
> +			~((TEGRA210_SURFACE_ALIGNMENT) - 1));
> +}
> +
> +static int vi2_channel_start_streaming(struct vb2_queue *vq, u32 count)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vq);
> +	struct media_pipeline *pipe = &chan->video.pipe;
> +	int ret = 0;
> +
> +	/* turn on the power on first open */
> +	if (atomic_add_return(1, &chan->vi->power_on_refcnt) == 1) {
> +		ret = tegra_vi_power_on(chan->vi);
> +		if (ret < 0)
> +			goto error_vi_power_on;
> +
> +		usleep_range(5, 100);
> +		tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL,
> +				    VI_CG_2ND_LEVEL_EN);
> +		usleep_range(10, 15);
> +	}
> +
> +	/* clean up status */
> +	csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, 0xFFFFFFFF);
> +
> +	/*
> +	 * Sync point FIFO full stalls the host interface.
> +	 * Setting NO_STALL will drop INCR_SYNCPT methods when fifos are
> +	 * full and corresponding condition bits in INCR_SYNCPT_ERROR
> +	 * register will be set.
> +	 * This allows SW to process error recovery.
> +	 */
> +	tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_CNTRL,
> +			    TEGRA_VI_CFG_VI_INCR_SYNCPT_NO_STALL);
> +
> +	ret = media_pipeline_start(&chan->video.entity, pipe);
> +	if (ret < 0)
> +		goto error_pipeline_start;
> +
> +	/* start the pipeline */
> +	ret = tegra_channel_set_stream(chan, true);
> +	if (ret < 0)
> +		goto error_set_stream;
> +
> +	/* program VI registers after TPG, sensors and CSI streaming */
> +	ret = tegra_channel_capture_setup(chan);
> +	if (ret < 0)
> +		goto error_capture_setup;
> +
> +	chan->sequence = 0;
> +
> +	/* start kthread to capture data to buffer */
> +	chan->kthread_capture_start = kthread_run(chan_capture_kthread_start,
> +						  chan, "%s:0",
> +						  chan->video.name);
> +	if (IS_ERR(chan->kthread_capture_start)) {
> +		dev_err(&chan->video.dev,
> +			"failed to run kthread for capture start!\n");
> +		ret = PTR_ERR(chan->kthread_capture_start);
> +		goto error_capture_setup;
> +	}
> +
> +	chan->kthread_capture_done = kthread_run(chan_capture_kthread_done,
> +						 chan, "%s:1",
> +						 chan->video.name);
> +	if (IS_ERR(chan->kthread_capture_done)) {
> +		dev_err(&chan->video.dev,
> +			"failed to run kthread for capture done!\n");
> +		ret = PTR_ERR(chan->kthread_capture_done);
> +		goto error_capture_setup;
> +	}
> +
> +	return 0;
> +
> +error_capture_setup:
> +	tegra_channel_set_stream(chan, false);
> +
> +error_set_stream:
> +	media_pipeline_stop(&chan->video.entity);
> +
> +error_pipeline_start:
> +	tegra_channel_queued_buf_done(chan, VB2_BUF_STATE_QUEUED);
> +
> +error_vi_power_on:
> +	if (atomic_dec_and_test(&chan->vi->power_on_refcnt))
> +		tegra_vi_power_off(chan->vi);
> +
> +	return ret;
> +}
> +
> +static void vi2_channel_stop_streaming(struct vb2_queue *vq)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vq);
> +
> +	/* stop the kthread for capture */
> +	kthread_stop(chan->kthread_capture_start);
> +	chan->kthread_capture_start = NULL;
> +	kthread_stop(chan->kthread_capture_done);
> +	chan->kthread_capture_done = NULL;
> +
> +	/* disable clock gating to enable continuous clock */
> +	tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL, 0);
> +
> +	/* clear single shot if armed at close */
> +	if (csi_read(chan, TEGRA_VI_CSI_SINGLE_SHOT)) {
> +		csi_write(chan, TEGRA_VI_CSI_SW_RESET, 0xF);
> +		csi_write(chan, TEGRA_VI_CSI_SW_RESET, 0x0);
> +	}
> +
> +	/* enable clock gating so VI can be clock gated if necessary */
> +	tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL, VI_CG_2ND_LEVEL_EN);
> +
> +	tegra_channel_set_stream(chan, false);
> +
> +	media_pipeline_stop(&chan->video.entity);
> +
> +	/* turn off power on the last release */
> +	if (atomic_dec_and_test(&chan->vi->power_on_refcnt))
> +		tegra_vi_power_off(chan->vi);
> +
> +	tegra_channel_queued_buf_done(chan, VB2_BUF_STATE_ERROR);
> +}
> +
> +const struct tegra_vi_fops vi2_fops = {
> +	.vi_stride_align = vi2_stride_align,
> +	.vi_start_streaming = vi2_channel_start_streaming,
> +	.vi_stop_streaming = vi2_channel_stop_streaming,
> +};
> +EXPORT_SYMBOL(vi2_fops);
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/vi2_fops.h b/drivers/staging/media/tegra/vi2_fops.h
> new file mode 100644
> index 000000000000..dcbd3ad4b642
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_fops.h
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __T210_VI_H__
> +#define __T210_VI_H__
> +
> +#define	TEGRA210_CLOCK_VI_MAX			460000000
> +
> +#define	TEGRA_VI_CSI_BASE(x)			(0x100 + (x) * 0x100)
> +
> +extern const struct tegra_vi_fops vi2_fops;
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/vi2_formats.h b/drivers/staging/media/tegra/vi2_formats.h
> new file mode 100644
> index 000000000000..416960b1c1f2
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_formats.h
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __VI2_FORMATS_H_
> +#define __VI2_FORMATS_H_
> +
> +#include "tegra-core.h"
> +
> +/*
> + * These go into the TEGRA_VI_CSI_n_IMAGE_DEF registers bits 23:16
> + * Output pixel memory format for the VI channel.
> + */
> +enum tegra_image_format {
> +	TEGRA_IMAGE_FORMAT_T_L8 = 16,
> +
> +	TEGRA_IMAGE_FORMAT_T_R16_I = 32,
> +	TEGRA_IMAGE_FORMAT_T_B5G6R5,
> +	TEGRA_IMAGE_FORMAT_T_R5G6B5,
> +	TEGRA_IMAGE_FORMAT_T_A1B5G5R5,
> +	TEGRA_IMAGE_FORMAT_T_A1R5G5B5,
> +	TEGRA_IMAGE_FORMAT_T_B5G5R5A1,
> +	TEGRA_IMAGE_FORMAT_T_R5G5B5A1,
> +	TEGRA_IMAGE_FORMAT_T_A4B4G4R4,
> +	TEGRA_IMAGE_FORMAT_T_A4R4G4B4,
> +	TEGRA_IMAGE_FORMAT_T_B4G4R4A4,
> +	TEGRA_IMAGE_FORMAT_T_R4G4B4A4,
> +
> +	TEGRA_IMAGE_FORMAT_T_A8B8G8R8 = 64,
> +	TEGRA_IMAGE_FORMAT_T_A8R8G8B8,
> +	TEGRA_IMAGE_FORMAT_T_B8G8R8A8,
> +	TEGRA_IMAGE_FORMAT_T_R8G8B8A8,
> +	TEGRA_IMAGE_FORMAT_T_A2B10G10R10,
> +	TEGRA_IMAGE_FORMAT_T_A2R10G10B10,
> +	TEGRA_IMAGE_FORMAT_T_B10G10R10A2,
> +	TEGRA_IMAGE_FORMAT_T_R10G10B10A2,
> +
> +	TEGRA_IMAGE_FORMAT_T_A8Y8U8V8 = 193,
> +	TEGRA_IMAGE_FORMAT_T_V8U8Y8A8,
> +
> +	TEGRA_IMAGE_FORMAT_T_A2Y10U10V10 = 197,
> +	TEGRA_IMAGE_FORMAT_T_V10U10Y10A2,
> +	TEGRA_IMAGE_FORMAT_T_Y8_U8__Y8_V8,
> +	TEGRA_IMAGE_FORMAT_T_Y8_V8__Y8_U8,
> +	TEGRA_IMAGE_FORMAT_T_U8_Y8__V8_Y8,
> +	TEGRA_IMAGE_FORMAT_T_V8_Y8__U8_Y8,
> +
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N444 = 224,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N444,
> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N444,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N422,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N422,
> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N422,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N420,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N420,
> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N420,
> +	TEGRA_IMAGE_FORMAT_T_X2LC10LB10LA10,
> +	TEGRA_IMAGE_FORMAT_T_A2R6R6R6R6R6,
> +};
> +
> +static const struct tegra_video_format vi2_video_formats[] = {
> +	/* RAW 8 */
> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SRGGB8_1X8, 1, 1, T_L8,
> +			   RAW8, SRGGB8, "RGRG.. GBGB.."),
> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SGRBG8_1X8, 1, 1, T_L8,
> +			   RAW8, SGRBG8, "GRGR.. BGBG.."),
> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SGBRG8_1X8, 1, 1, T_L8,
> +			   RAW8, SGBRG8, "GBGB.. RGRG.."),
> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SBGGR8_1X8, 1, 1, T_L8,
> +			   RAW8, SBGGR8, "BGBG.. GRGR.."),
> +
> +	/* RAW 10 */
> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SRGGB10_1X10, 2, 1, T_R16_I,
> +			   RAW10, SRGGB10, "RGRG.. GBGB.."),
> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SGRBG10_1X10, 2, 1, T_R16_I,
> +			   RAW10, SGRBG10, "GRGR.. BGBG.."),
> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SGBRG10_1X10, 2, 1, T_R16_I,
> +			   RAW10, SGBRG10, "GBGB.. RGRG.."),
> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SBGGR10_1X10, 2, 1, T_R16_I,
> +			   RAW10, SBGGR10, "BGBG.. GRGR.."),
> +
> +	/* RAW 12 */
> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SRGGB12_1X12, 2, 1, T_R16_I,
> +			   RAW12, SRGGB12, "RGRG.. GBGB.."),
> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SGRBG12_1X12, 2, 1, T_R16_I,
> +			   RAW12, SGRBG12, "GRGR.. BGBG.."),
> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SGBRG12_1X12, 2, 1, T_R16_I,
> +			   RAW12, SGBRG12, "GBGB.. RGRG.."),
> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SBGGR12_1X12, 2, 1, T_R16_I,
> +			   RAW12, SBGGR12, "BGBG.. GRGR.."),
> +
> +	/* RGB888 */
> +	TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X24, 4, 1, T_A8R8G8B8,
> +			   RGB888, ABGR32, "BGRA-8-8-8-8"),
> +	TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X32_PADHI, 4, 1, T_A8B8G8R8,
> +			   RGB888, RGB32, "RGB-8-8-8-8"),
> +
> +	/* YUV422 */
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 2, 1, T_U8_Y8__V8_Y8,
> +			   YUV422_8, UYVY, "YUV 4:2:2"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_1X16, 2, 1, T_V8_Y8__U8_Y8,
> +			   YUV422_8, VYUY, "YUV 4:2:2"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_1X16, 2, 1, T_Y8_U8__Y8_V8,
> +			   YUV422_8, YUYV, "YUV 4:2:2"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_1X16, 2, 1, T_Y8_V8__Y8_U8,
> +			   YUV422_8, YVYU, "YUV 4:2:2"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 1, 1, T_Y8__V8U8_N422,
> +			   YUV422_8, NV16, "NV16"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_2X8, 2, 1, T_U8_Y8__V8_Y8,
> +			   YUV422_8, UYVY, "YUV 4:2:2 UYVY"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_2X8, 2, 1, T_V8_Y8__U8_Y8,
> +			   YUV422_8, VYUY, "YUV 4:2:2 VYUY"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_2X8, 2, 1, T_Y8_U8__Y8_V8,
> +			   YUV422_8, YUYV, "YUV 4:2:2 YUYV"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_2X8, 2, 1, T_Y8_V8__Y8_U8,
> +			   YUV422_8, YVYU, "YUV 4:2:2 YVYU"),
> +};
> +#endif
> diff --git a/drivers/staging/media/tegra/vi2_registers.h b/drivers/staging/media/tegra/vi2_registers.h
> new file mode 100644
> index 000000000000..c54a6a3aa1c4
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_registers.h
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __REGISTERS_H__
> +#define __REGISTERS_H__
> +
> +#define	TEGRA_CLOCK_VI_MAX				793600000
> +#define	TEGRA210_SURFACE_ALIGNMENT			64
> +#define TEGRA210_MAX_CHANNELS				6
> +
> +/* Tegra210 VI registers */
> +#define	TEGRA_VI_SYNCPT_WAIT_TIMEOUT			200
> +#define	TEGRA_VI_CFG_VI_INCR_SYNCPT			0x000
> +#define   VI_CFG_VI_INCR_SYNCPT_COND(x)			(((x) & 0xff) << 8)
> +#define	  VI_CSI_PP_LINE_START(port)			(4 + (port) * 4)
> +#define	  VI_CSI_PP_FRAME_START(port)			(5 + (port) * 4)
> +#define	  VI_CSI_MW_REQ_DONE(port)			(6 + (port) * 4)
> +#define	  VI_CSI_MW_ACK_DONE(port)			(7 + (port) * 4)
> +
> +#define	TEGRA_VI_CFG_VI_INCR_SYNCPT_CNTRL		0x004
> +#define	  TEGRA_VI_CFG_VI_INCR_SYNCPT_NO_STALL		BIT(8)
> +#define	TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR		0x008
> +#define	TEGRA_VI_CFG_CTXSW				0x020
> +#define	TEGRA_VI_CFG_INTSTATUS				0x024
> +#define	TEGRA_VI_CFG_PWM_CONTROL			0x038
> +#define	TEGRA_VI_CFG_PWM_HIGH_PULSE			0x03c
> +#define	TEGRA_VI_CFG_PWM_LOW_PULSE			0x040
> +#define	TEGRA_VI_CFG_PWM_SELECT_PULSE_A			0x044
> +#define	TEGRA_VI_CFG_PWM_SELECT_PULSE_B			0x048
> +#define	TEGRA_VI_CFG_PWM_SELECT_PULSE_C			0x04c
> +#define	TEGRA_VI_CFG_PWM_SELECT_PULSE_D			0x050
> +#define	TEGRA_VI_CFG_VGP1				0x064
> +#define	TEGRA_VI_CFG_VGP2				0x068
> +#define	TEGRA_VI_CFG_VGP3				0x06c
> +#define	TEGRA_VI_CFG_VGP4				0x070
> +#define	TEGRA_VI_CFG_VGP5				0x074
> +#define	TEGRA_VI_CFG_VGP6				0x078
> +#define	TEGRA_VI_CFG_INTERRUPT_MASK			0x08c
> +#define	TEGRA_VI_CFG_INTERRUPT_TYPE_SELECT		0x090
> +#define	TEGRA_VI_CFG_INTERRUPT_POLARITY_SELECT		0x094
> +#define	TEGRA_VI_CFG_INTERRUPT_STATUS			0x098
> +#define	TEGRA_VI_CFG_VGP_SYNCPT_CONFIG			0x0ac
> +#define	TEGRA_VI_CFG_VI_SW_RESET			0x0b4
> +#define	TEGRA_VI_CFG_CG_CTRL				0x0b8
> +#define   VI_CG_2ND_LEVEL_EN				0x1
> +#define	TEGRA_VI_CFG_VI_MCCIF_FIFOCTRL			0x0e4
> +#define	TEGRA_VI_CFG_TIMEOUT_WCOAL_VI			0x0e8
> +#define	TEGRA_VI_CFG_DVFS				0x0f0
> +#define	TEGRA_VI_CFG_RESERVE				0x0f4
> +#define	TEGRA_VI_CFG_RESERVE_1				0x0f8
> +
> +/* Tegra210 CSI registers */
> +#define TEGRA_VI_CSI_SW_RESET				0x000
> +#define TEGRA_VI_CSI_SINGLE_SHOT			0x004
> +#define   SINGLE_SHOT_CAPTURE				0x1
> +#define TEGRA_VI_CSI_SINGLE_SHOT_STATE_UPDATE		0x008
> +#define TEGRA_VI_CSI_IMAGE_DEF				0x00c
> +#define   BYPASS_PXL_TRANSFORM_OFFSET			24
> +#define   IMAGE_DEF_FORMAT_OFFSET			16
> +#define   IMAGE_DEF_DEST_MEM				0x1
> +#define TEGRA_VI_CSI_RGB2Y_CTRL				0x010
> +#define TEGRA_VI_CSI_MEM_TILING				0x014
> +#define TEGRA_VI_CSI_IMAGE_SIZE				0x018
> +#define   IMAGE_SIZE_HEIGHT_OFFSET			16
> +#define TEGRA_VI_CSI_IMAGE_SIZE_WC			0x01c
> +#define TEGRA_VI_CSI_IMAGE_DT				0x020
> +#define TEGRA_VI_CSI_SURFACE0_OFFSET_MSB		0x024
> +#define TEGRA_VI_CSI_SURFACE0_OFFSET_LSB		0x028
> +#define TEGRA_VI_CSI_SURFACE1_OFFSET_MSB		0x02c
> +#define TEGRA_VI_CSI_SURFACE1_OFFSET_LSB		0x030
> +#define TEGRA_VI_CSI_SURFACE2_OFFSET_MSB		0x034
> +#define TEGRA_VI_CSI_SURFACE2_OFFSET_LSB		0x038
> +#define TEGRA_VI_CSI_SURFACE0_BF_OFFSET_MSB		0x03c
> +#define TEGRA_VI_CSI_SURFACE0_BF_OFFSET_LSB		0x040
> +#define TEGRA_VI_CSI_SURFACE1_BF_OFFSET_MSB		0x044
> +#define TEGRA_VI_CSI_SURFACE1_BF_OFFSET_LSB		0x048
> +#define TEGRA_VI_CSI_SURFACE2_BF_OFFSET_MSB		0x04c
> +#define TEGRA_VI_CSI_SURFACE2_BF_OFFSET_LSB		0x050
> +#define TEGRA_VI_CSI_SURFACE0_STRIDE			0x054
> +#define TEGRA_VI_CSI_SURFACE1_STRIDE			0x058
> +#define TEGRA_VI_CSI_SURFACE2_STRIDE			0x05c
> +#define TEGRA_VI_CSI_SURFACE_HEIGHT0			0x060
> +#define TEGRA_VI_CSI_ISPINTF_CONFIG			0x064
> +#define TEGRA_VI_CSI_ERROR_STATUS			0x084
> +#define TEGRA_VI_CSI_ERROR_INT_MASK			0x088
> +#define TEGRA_VI_CSI_WD_CTRL				0x08c
> +#define TEGRA_VI_CSI_WD_PERIOD				0x090
> +
> +/* Tegra210 CSI Pixel Parser registers: Starts from 0x838, offset 0x0 */
> +#define TEGRA_CSI_INPUT_STREAM_CONTROL                  0x000
> +#define   CSI_SKIP_PACKET_THRESHOLD_OFFSET		16
> +
> +#define TEGRA_CSI_PIXEL_STREAM_CONTROL0			0x004
> +#define   CSI_PP_PACKET_HEADER_SENT			(0x1 << 4)

Maybe use the BIT() macro ?

Regards,
Helen

> +#define   CSI_PP_DATA_IDENTIFIER_ENABLE			(0x1 << 5)
> +#define   CSI_PP_WORD_COUNT_SELECT_HEADER		(0x1 << 6)
> +#define   CSI_PP_CRC_CHECK_ENABLE			(0x1 << 7)
> +#define   CSI_PP_WC_CHECK				(0x1 << 8)
> +#define   CSI_PP_OUTPUT_FORMAT_STORE			(0x3 << 16)
> +#define   CSI_PP_HEADER_EC_DISABLE			(0x1 << 27)
> +#define   CSI_PPA_PAD_FRAME_NOPAD			(0x2 << 28)
> +
> +#define TEGRA_CSI_PIXEL_STREAM_CONTROL1                 0x008
> +#define   CSI_PP_TOP_FIELD_FRAME_OFFSET			0
> +#define   CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET		4
> +
> +#define TEGRA_CSI_PIXEL_STREAM_GAP                      0x00c
> +#define   PP_FRAME_MIN_GAP_OFFSET			16
> +
> +#define TEGRA_CSI_PIXEL_STREAM_PP_COMMAND               0x010
> +#define   CSI_PP_ENABLE					0x1
> +#define   CSI_PP_DISABLE				0x2
> +#define   CSI_PP_RST					0x3
> +#define   CSI_PP_SINGLE_SHOT_ENABLE			(0x1 << 2)
> +#define   CSI_PP_START_MARKER_FRAME_MAX_OFFSET		12
> +
> +#define TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME           0x014
> +#define TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK           0x018
> +#define TEGRA_CSI_PIXEL_PARSER_STATUS                   0x01c
> +#define TEGRA_CSI_CSI_SW_SENSOR_RESET                   0x020
> +
> +/* Tegra210 CSI PHY registers */
> +/* CSI_PHY_CIL_COMMAND_0 offset 0x0d0 from TEGRA_CSI_PIXEL_PARSER_0_BASE */
> +#define TEGRA_CSI_PHY_CIL_COMMAND                       0x0d0
> +#define   CSI_A_PHY_CIL_NOP				0x0
> +#define   CSI_A_PHY_CIL_ENABLE				0x1
> +#define   CSI_A_PHY_CIL_DISABLE				0x2
> +#define   CSI_A_PHY_CIL_ENABLE_MASK			0x3
> +#define   CSI_B_PHY_CIL_NOP				(0x0 << 8)
> +#define   CSI_B_PHY_CIL_ENABLE				(0x1 << 8)
> +#define   CSI_B_PHY_CIL_DISABLE				(0x2 << 8)
> +#define   CSI_B_PHY_CIL_ENABLE_MASK			(0x3 << 8)
> +
> +#define TEGRA_CSI_CIL_PAD_CONFIG0                       0x000
> +#define   BRICK_CLOCK_A_4X				(0x1 << 16)
> +#define   BRICK_CLOCK_B_4X				(0x2 << 16)
> +#define TEGRA_CSI_CIL_PAD_CONFIG1                       0x004
> +#define TEGRA_CSI_CIL_PHY_CONTROL                       0x008
> +#define TEGRA_CSI_CIL_INTERRUPT_MASK                    0x00c
> +#define TEGRA_CSI_CIL_STATUS                            0x010
> +#define TEGRA_CSI_CILX_STATUS                           0x014
> +#define TEGRA_CSI_CIL_ESCAPE_MODE_COMMAND               0x018
> +#define TEGRA_CSI_CIL_ESCAPE_MODE_DATA                  0x01c
> +#define TEGRA_CSI_CIL_SW_SENSOR_RESET                   0x020
> +
> +#define TEGRA_CSI_PATTERN_GENERATOR_CTRL		0x000
> +#define   PG_MODE_OFFSET				2
> +#define   PG_ENABLE					0x1
> +#define   PG_DISABLE					0x0
> +
> +#define PG_VBLANK_OFFSET				16
> +#define TEGRA_CSI_PG_BLANK				0x004
> +#define TEGRA_CSI_PG_PHASE				0x008
> +#define TEGRA_CSI_PG_RED_FREQ				0x00c
> +#define   PG_RED_VERT_INIT_FREQ_OFFSET			16
> +#define   PG_RED_HOR_INIT_FREQ_OFFSET			0
> +
> +#define TEGRA_CSI_PG_RED_FREQ_RATE			0x010
> +#define TEGRA_CSI_PG_GREEN_FREQ				0x014
> +#define   PG_GREEN_VERT_INIT_FREQ_OFFSET		16
> +#define   PG_GREEN_HOR_INIT_FREQ_OFFSET			0
> +
> +#define TEGRA_CSI_PG_GREEN_FREQ_RATE			0x018
> +#define TEGRA_CSI_PG_BLUE_FREQ				0x01c
> +#define   PG_BLUE_VERT_INIT_FREQ_OFFSET			16
> +#define   PG_BLUE_HOR_INIT_FREQ_OFFSET			0
> +
> +#define TEGRA_CSI_PG_BLUE_FREQ_RATE			0x020
> +#define TEGRA_CSI_PG_AOHDR				0x024
> +
> +#define TEGRA_CSI_DPCM_CTRL_A				0xa2c
> +#define TEGRA_CSI_DPCM_CTRL_B				0xa30
> +
> +/* Other CSI registers: Starts from 0xa44, offset 0x20c */
> +#define TEGRA_CSI_STALL_COUNTER				0x20c
> +#define TEGRA_CSI_CSI_READONLY_STATUS			0x210
> +#define TEGRA_CSI_CSI_SW_STATUS_RESET			0x214
> +#define TEGRA_CSI_CLKEN_OVERRIDE			0x218
> +#define TEGRA_CSI_DEBUG_CONTROL				0x21c
> +#define TEGRA_CSI_DEBUG_COUNTER_0			0x220
> +#define TEGRA_CSI_DEBUG_COUNTER_1			0x224
> +#define TEGRA_CSI_DEBUG_COUNTER_2			0x228
> +
> +/* Tegra210 CSI Pixel Parser registers */
> +#define TEGRA_CSI_PIXEL_PARSER_0_BASE			0x0838
> +#define TEGRA_CSI_PIXEL_PARSER_1_BASE			0x086c
> +#define TEGRA_CSI_PIXEL_PARSER_2_BASE			0x1038
> +#define TEGRA_CSI_PIXEL_PARSER_3_BASE			0x106c
> +#define TEGRA_CSI_PIXEL_PARSER_4_BASE			0x1838
> +#define TEGRA_CSI_PIXEL_PARSER_5_BASE			0x186c
> +
> +#endif
> 

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 21:45   ` Helen Koike
@ 2020-01-28 22:13     ` Sowjanya Komatineni
  2020-01-29  0:49       ` Sowjanya Komatineni
  2020-01-29 10:09       ` Thierry Reding
  0 siblings, 2 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-28 22:13 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/28/20 1:45 PM, Helen Koike wrote:
> External email: Use caution opening links or attachments
>
>
> Hi Sowjanya,
>
> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>
> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>> Tegra210 contains a powerful Video Input (VI) hardware controller
>> which can support up to 6 MIPI CSI camera sensors.
>>
>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>> capture from an external camera sensor connected to CSI or from
>> built-in test pattern generator.
>>
>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>
>> This patch adds a V4L2 media controller and capture driver support
>> for Tegra210 built-in CSI to VI test pattern generator.
>>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
digraph board {
         rankdir=TB
         n00000001 [label="54080000.vi-output-0\n/dev/video0", 
shape=box, style=filled, fillcolor=yellow]
         n00000005 [label="54080000.vi-output-1\n/dev/video1", 
shape=box, style=filled, fillcolor=yellow]
         n00000009 [label="54080000.vi-output-2\n/dev/video2", 
shape=box, style=filled, fillcolor=yellow]
         n0000000d [label="54080000.vi-output-3\n/dev/video3", 
shape=box, style=filled, fillcolor=yellow]
         n00000011 [label="54080000.vi-output-4\n/dev/video4", 
shape=box, style=filled, fillcolor=yellow]
         n00000015 [label="54080000.vi-output-5\n/dev/video5", 
shape=box, style=filled, fillcolor=yellow]
         n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, 
style=filled, fillcolor=green]
         n00000019:port0 -> n00000001
         n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, 
style=filled, fillcolor=green]
         n0000001d:port0 -> n00000005
         n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, 
style=filled, fillcolor=green]
         n00000021:port0 -> n00000009
         n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, 
style=filled, fillcolor=green]
         n00000025:port0 -> n0000000d
         n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, 
style=filled, fillcolor=green]
         n00000029:port0 -> n00000011
         n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, 
style=filled, fillcolor=green]
         n0000002d:port0 -> n00000015
}

>
>> ---
>>   drivers/staging/media/Kconfig               |   2 +
>>   drivers/staging/media/Makefile              |   1 +
>>   drivers/staging/media/tegra/Kconfig         |  12 +
>>   drivers/staging/media/tegra/Makefile        |  11 +
>>   drivers/staging/media/tegra/TODO            |  10 +
>>   drivers/staging/media/tegra/csi.h           | 111 +++++
>>   drivers/staging/media/tegra/csi2_fops.c     | 335 +++++++++++++++
>>   drivers/staging/media/tegra/csi2_fops.h     |  15 +
>>   drivers/staging/media/tegra/host1x-video.c  | 120 ++++++
>>   drivers/staging/media/tegra/host1x-video.h  |  33 ++
>>   drivers/staging/media/tegra/mc_common.h     | 131 ++++++
>>   drivers/staging/media/tegra/tegra-channel.c | 628 ++++++++++++++++++++++++++++
>>   drivers/staging/media/tegra/tegra-core.c    | 111 +++++
>>   drivers/staging/media/tegra/tegra-core.h    | 125 ++++++
>>   drivers/staging/media/tegra/tegra-csi.c     | 380 +++++++++++++++++
>>   drivers/staging/media/tegra/tegra-vi.c      | 351 ++++++++++++++++
>>   drivers/staging/media/tegra/tegra-vi.h      | 101 +++++
>>   drivers/staging/media/tegra/vi2_fops.c      | 364 ++++++++++++++++
>>   drivers/staging/media/tegra/vi2_fops.h      |  15 +
>>   drivers/staging/media/tegra/vi2_formats.h   | 119 ++++++
>>   drivers/staging/media/tegra/vi2_registers.h | 194 +++++++++
>>   21 files changed, 3169 insertions(+)
>>   create mode 100644 drivers/staging/media/tegra/Kconfig
>>   create mode 100644 drivers/staging/media/tegra/Makefile
>>   create mode 100644 drivers/staging/media/tegra/TODO
>>   create mode 100644 drivers/staging/media/tegra/csi.h
>>   create mode 100644 drivers/staging/media/tegra/csi2_fops.c
>>   create mode 100644 drivers/staging/media/tegra/csi2_fops.h
>>   create mode 100644 drivers/staging/media/tegra/host1x-video.c
>>   create mode 100644 drivers/staging/media/tegra/host1x-video.h
>>   create mode 100644 drivers/staging/media/tegra/mc_common.h
>>   create mode 100644 drivers/staging/media/tegra/tegra-channel.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-core.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-core.h
>>   create mode 100644 drivers/staging/media/tegra/tegra-csi.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-vi.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-vi.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_fops.c
>>   create mode 100644 drivers/staging/media/tegra/vi2_fops.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_formats.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_registers.h
>>
>> diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
>> index c394abffea86..e367030d4407 100644
>> --- a/drivers/staging/media/Kconfig
>> +++ b/drivers/staging/media/Kconfig
>> @@ -34,6 +34,8 @@ source "drivers/staging/media/sunxi/Kconfig"
>>
>>   source "drivers/staging/media/tegra-vde/Kconfig"
>>
>> +source "drivers/staging/media/tegra/Kconfig"
>> +
>>   source "drivers/staging/media/ipu3/Kconfig"
>>
>>   source "drivers/staging/media/soc_camera/Kconfig"
>> diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
>> index ea9fce8014bb..67a22ac709e8 100644
>> --- a/drivers/staging/media/Makefile
>> +++ b/drivers/staging/media/Makefile
>> @@ -10,3 +10,4 @@ obj-$(CONFIG_VIDEO_IPU3_IMGU)       += ipu3/
>>   obj-$(CONFIG_SOC_CAMERA)     += soc_camera/
>>   obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0)  += phy-rockchip-dphy-rx0/
>>   obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1)    += rkisp1/
>> +obj-$(CONFIG_VIDEO_TEGRA)    += tegra/
>> diff --git a/drivers/staging/media/tegra/Kconfig b/drivers/staging/media/tegra/Kconfig
>> new file mode 100644
>> index 000000000000..443b99f2e2c9
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/Kconfig
>> @@ -0,0 +1,12 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +config VIDEO_TEGRA
>> +     tristate "NVIDIA Tegra VI driver"
>> +     depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
>> +     depends on COMMON_CLK
>> +     depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
>> +     depends on MEDIA_CONTROLLER
>> +     select TEGRA_HOST1X
>> +     select VIDEOBUF2_DMA_CONTIG
>> +     select V4L2_FWNODE
>> +     help
>> +       Say yes here to enable support for Tegra video input hardware
>> diff --git a/drivers/staging/media/tegra/Makefile b/drivers/staging/media/tegra/Makefile
>> new file mode 100644
>> index 000000000000..003d23444d49
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/Makefile
>> @@ -0,0 +1,11 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +tegra-video-y := \
>> +             host1x-video.o \
>> +             tegra-channel.o \
>> +             tegra-core.o \
>> +             csi2_fops.o \
>> +             vi2_fops.o \
>> +             tegra-vi.o \
>> +             tegra-csi.o
>> +
>> +obj-$(CONFIG_VIDEO_TEGRA) += tegra-video.o
>> diff --git a/drivers/staging/media/tegra/TODO b/drivers/staging/media/tegra/TODO
>> new file mode 100644
>> index 000000000000..d7d64b13535e
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/TODO
>> @@ -0,0 +1,10 @@
>> +TODO list
>> +* Currently driver supports Tegra build-in TPG Only with direct media links from CSI to VI.
>> +  Update the driver to do TPG Vs Sensor media links based on the kernel config CONFIG_VIDEO_TEGRA_TPG.
>> +* Add real camera sensor capture support
>> +* Add RAW10 packed video format support to Tegra210 video formats
>> +* Add Tegra CSI MIPI pads calibration
>> +* Add MIPI clock Settle time computation based on the data rate
>> +* Add support for Ganged mode
>> +* Make sure v4l2-compliance tests pass with all of the above implementations.
>> +* Add SMMU support for VI to avoid cma_alloc failures with higher resolutions of some video formats.
>> diff --git a/drivers/staging/media/tegra/csi.h b/drivers/staging/media/tegra/csi.h
>> new file mode 100644
>> index 000000000000..81cdda4b6bdd
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/csi.h
>> @@ -0,0 +1,111 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __CSI_H_
>> +#define __CSI_H_
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +/*
>> + * Each CSI brick supports max of 4 lanes that can be used as either
>> + * one x4 port using both CILA and CILB partitions of a CSI brick or can
>> + * be used as two x2 ports with one x2 from CILA and the other x2 from
>> + * CILB.
>> + */
>> +#define CSI_LANES_PER_BRICK  4
>> +#define CSI_PORTS_PER_BRICK  2
>> +
>> +/* each CSI channel can have one sink and one source pads */
>> +#define TEGRA_CSI_PADS_NUM   2
>> +
>> +enum tegra_csi_cil_port {
>> +     PORT_A = 0,
>> +     PORT_B,
>> +};
>> +
>> +enum tegra_csi_block {
>> +     CSI_CIL_AB = 0,
>> +     CSI_CIL_CD,
>> +     CSI_CIL_EF,
>> +};
>> +
>> +struct tegra_csi_device;
>> +
>> +struct tegra_csi_port {
>> +     void __iomem *pixel_parser;
>> +     void __iomem *cila;
>> +     void __iomem *cilb;
>> +     void __iomem *tpg;
>> +
>> +     /* one pair of sink/source pad has one format */
>> +     struct v4l2_mbus_framefmt format;
>> +     unsigned int lanes;
>> +};
>> +
>> +struct tegra_csi_channel {
>> +     struct list_head list;
>> +     struct v4l2_subdev subdev;
>> +     struct media_pad pads[TEGRA_CSI_PADS_NUM];
>> +     struct device_node *of_node;
>> +     struct tegra_csi_device *csi;
>> +     struct tegra_csi_port *ports;
>> +     unsigned int numlanes;
>> +     unsigned int numpads;
>> +     u8 csi_port_num;
>> +
>> +     /* protects csi channel ports format fields */
>> +     struct mutex format_lock;
>> +};
>> +
>> +struct tegra_csi_soc_data {
>> +     const struct tegra_csi_fops *csi_fops;
>> +     unsigned int cil_max_clk_hz;
>> +     unsigned int num_tpg_channels;
>> +};
>> +
>> +/**
>> + * struct tegra_csi_device - NVIDIA Tegra CSI device structure
>> + * @dev: device struct
>> + * @client: host1x_client struct
>> + *
>> + * @iomem: register base
>> + * @csi_clk: clock for CSI
>> + * @cilab_clk: clock for CIL AB
>> + * @cilcd_clk: clock for CIL CD
>> + * @cilef_clk: clock for CIL EF
>> + * @tpg_clk: clock for internal CSI TPG logic
>> + *
>> + * @soc_data: pointer to SoC data structure
>> + * @fops: csi operations
>> + *
>> + * @channels: list of CSI channels
>> + */
>> +struct tegra_csi_device {
>> +     struct device *dev;
>> +     struct host1x_client client;
>> +
>> +     void __iomem *iomem;
>> +     struct clk *csi_clk;
>> +     struct clk *cilab_clk;
>> +     struct clk *cilcd_clk;
>> +     struct clk *cilef_clk;
>> +     struct clk *tpg_clk;
>> +     atomic_t clk_refcnt;
>> +
>> +     const struct tegra_csi_soc_data *soc_data;
>> +     const struct tegra_csi_fops *fops;
>> +
>> +     struct list_head csi_chans;
>> +};
>> +
>> +void tegra_csi_error_status(struct v4l2_subdev *subdev);
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/csi2_fops.c b/drivers/staging/media/tegra/csi2_fops.c
>> new file mode 100644
>> index 000000000000..5f2f7bd3ae50
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/csi2_fops.c
>> @@ -0,0 +1,335 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk/tegra.h>
>> +#include <linux/delay.h>
>> +
>> +#include "vi2_registers.h"
>> +#include "mc_common.h"
>> +#include "csi2_fops.h"
>> +#include "csi.h"
>> +
>> +/* CSI block registers offset */
>> +#define TEGRA210_CSI_PORT_OFFSET             0x34
>> +/* CSI CIL parition registers offset */
>> +#define TEGRA210_CSI_CIL_OFFSET                      0x0f4
>> +/* CSI TPG registers offset */
>> +#define TEGRA210_CSI_TPG_OFFSET                      0x18c
>> +
>> +#define CSI_PP_OFFSET(block) ((block) * 0x800)
>> +
>> +static void csi_write(struct tegra_csi_channel *chan, u8 block,
>> +                   unsigned int addr, u32 val)
>> +{
>> +     void __iomem *csi_pp_base;
>> +
>> +     csi_pp_base = chan->csi->iomem + CSI_PP_OFFSET(block);
>> +     writel(val, csi_pp_base + addr);
>> +}
>> +
>> +/* Pixel parser registers accessors */
>> +static void pp_write(struct tegra_csi_port *port, u32 addr, u32 val)
>> +{
>> +     writel(val, port->pixel_parser + addr);
>> +}
>> +
>> +static u32 pp_read(struct tegra_csi_port *port, u32 addr)
>> +{
>> +     return readl(port->pixel_parser + addr);
>> +}
>> +
>> +/* CSI CIL A/B port registers accessors */
>> +static void cil_write(struct tegra_csi_port *port, u8 port_id,
>> +                   u32 addr, u32 val)
>> +{
>> +     if (port_id & PORT_B)
>> +             writel(val, port->cilb + addr);
>> +     else
>> +             writel(val, port->cila + addr);
>> +}
>> +
>> +static u32 cil_read(struct tegra_csi_port *port, u8 port_id,
>> +                 u32 addr)
>> +{
>> +     if (port_id & PORT_B)
>> +             return readl(port->cilb + addr);
>> +     else
>> +             return readl(port->cila + addr);
>> +}
>> +
>> +/* Test pattern generator registers accessor */
>> +static void tpg_write(struct tegra_csi_port *port, unsigned int addr, u32 val)
>> +{
>> +     writel(val, port->tpg + addr);
>> +}
>> +
>> +static void csi2_error_status(struct tegra_csi_channel *csi_chan)
>> +{
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +     unsigned int port_num = csi_chan->csi_port_num;
>> +     struct tegra_csi_port *port = csi_chan->ports;
>> +     u32 val;
>> +
>> +     val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
>> +     dev_err(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n", val);
>> +
>> +     val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
>> +     dev_err(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
>> +
>> +     val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
>> +     dev_err(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
>> +}
>> +
>> +static int csi2_start_streaming(struct tegra_csi_channel *csi_chan,
>> +                             u8 pg_mode, int enable)
>> +{
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +     unsigned int port_num = csi_chan->csi_port_num;
>> +     unsigned int block = port_num >> 1;
>> +     struct tegra_csi_port *port = csi_chan->ports;
>> +     unsigned int cil_max_freq = csi->soc_data->cil_max_clk_hz;
>> +     struct clk *cil_clk;
>> +     int ret;
>> +
>> +     if (block == CSI_CIL_AB)
>> +             cil_clk = csi->cilab_clk;
>> +     else if (block == CSI_CIL_CD)
>> +             cil_clk = csi->cilcd_clk;
>> +     else
>> +             cil_clk = csi->cilef_clk;
>> +
>> +     if (enable) {
>> +             ret = clk_set_rate(cil_clk, cil_max_freq);
>> +             if (ret)
>> +                     dev_err(csi->dev,
>> +                             "failed to set cil clk rate, err: %d\n", ret);
>> +
>> +             /* enable CIL clock on first open */
>> +             if (atomic_add_return(1, &csi->clk_refcnt) == 1) {
>> +                     ret = clk_prepare_enable(cil_clk);
>> +                     if (ret) {
>> +                             dev_err(csi->dev,
>> +                                     "failed to enable cil clk, err: %d\n",
>> +                                     ret);
>> +                             return ret;
>> +                     }
>> +             }
>> +
>> +             /*
>> +              * On Tegra210, TPG internal logic uses PLLD out along with
>> +              * the CIL clock.
>> +              * So, enable TPG clock during TPG mode streaming.
>> +              */
>> +             if (pg_mode) {
>> +                     ret = clk_set_rate(csi->tpg_clk, TEGRA210_TPG_CLOCK);
>> +                     if (ret)
>> +                             dev_err(csi->dev,
>> +                                     "failed to set tpg clk rate\n");
>> +
>> +                     ret = clk_prepare_enable(csi->tpg_clk);
>> +                     if (ret) {
>> +                             dev_err(csi->dev,
>> +                                     "failed to enable tpg clk, err: %d\n",
>> +                                     ret);
>> +                             return ret;
>> +                     }
>> +             }
>> +
>> +             csi_write(csi_chan, block, TEGRA_CSI_CLKEN_OVERRIDE, 0);
>> +
>> +             /* clean up status */
>> +             pp_write(port, TEGRA_CSI_PIXEL_PARSER_STATUS, 0xFFFFFFFF);
>> +             cil_write(port, port_num, TEGRA_CSI_CIL_STATUS, 0xFFFFFFFF);
>> +             cil_write(port, port_num, TEGRA_CSI_CILX_STATUS, 0xFFFFFFFF);
>> +             cil_write(port, port_num, TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
>> +
>> +             /* CIL PHY registers setup */
>> +             cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
>> +             cil_write(port, port_num, TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
>> +
>> +             /*
>> +              * The CSI unit provides for connection of up to six cameras in
>> +              * the system and is organized as three identical instances of
>> +              * two MIPI support blocks, each with a separate 4-lane
>> +              * interface that can be configured as a single camera with 4
>> +              * lanes or as a dual camera with 2 lanes available for each
>> +              * camera.
>> +              */
>> +             if (port->lanes == 4) {
>> +                     cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0,
>> +                               BRICK_CLOCK_A_4X);
>> +
>> +                     cil_write(port, (port_num + 1),
>> +                               TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
>> +
>> +                     cil_write(port, (port_num + 1),
>> +                               TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
>> +
>> +                     cil_write(port, (port_num + 1),
>> +                               TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
>> +
>> +                     csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +                               CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_ENABLE);
>> +             } else {
>> +                     u32 val = ((port_num & 1) == PORT_A) ?
>> +                               CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_NOP :
>> +                               CSI_B_PHY_CIL_ENABLE | CSI_A_PHY_CIL_NOP;
>> +                     csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +                               val);
>> +             }
>> +
>> +             /* CSI pixel parser registers setup */
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +                      (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +                      CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_RST);
>> +             pp_write(port, TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK, 0x0);
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL0,
>> +                      CSI_PP_PACKET_HEADER_SENT |
>> +                      CSI_PP_DATA_IDENTIFIER_ENABLE |
>> +                      CSI_PP_WORD_COUNT_SELECT_HEADER |
>> +                      CSI_PP_CRC_CHECK_ENABLE |  CSI_PP_WC_CHECK |
>> +                      CSI_PP_OUTPUT_FORMAT_STORE |
>> +                      CSI_PP_HEADER_EC_DISABLE | CSI_PPA_PAD_FRAME_NOPAD |
>> +                      (port_num & 1));
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL1,
>> +                      (0x1 << CSI_PP_TOP_FIELD_FRAME_OFFSET) |
>> +                      (0x1 << CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET));
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_GAP,
>> +                      0x14 << PP_FRAME_MIN_GAP_OFFSET);
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME, 0x0);
>> +             pp_write(port, TEGRA_CSI_INPUT_STREAM_CONTROL,
>> +                      (0x3f << CSI_SKIP_PACKET_THRESHOLD_OFFSET) |
>> +                      (port->lanes - 1));
>> +
>> +             /* TPG setup */
>> +             if (pg_mode) {
>> +                     tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
>> +                               ((pg_mode - 1) << PG_MODE_OFFSET) |
>> +                               PG_ENABLE);
>> +                     tpg_write(port, TEGRA_CSI_PG_PHASE, 0x0);
>> +                     tpg_write(port, TEGRA_CSI_PG_RED_FREQ,
>> +                               (0x10 << PG_RED_VERT_INIT_FREQ_OFFSET) |
>> +                               (0x10 << PG_RED_HOR_INIT_FREQ_OFFSET));
>> +                     tpg_write(port, TEGRA_CSI_PG_RED_FREQ_RATE, 0x0);
>> +                     tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ,
>> +                               (0x10 << PG_GREEN_VERT_INIT_FREQ_OFFSET) |
>> +                               (0x10 << PG_GREEN_HOR_INIT_FREQ_OFFSET));
>> +                     tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ_RATE, 0x0);
>> +                     tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ,
>> +                               (0x10 << PG_BLUE_VERT_INIT_FREQ_OFFSET) |
>> +                               (0x10 << PG_BLUE_HOR_INIT_FREQ_OFFSET));
>> +                     tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ_RATE, 0x0);
>> +             }
>> +
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +                      (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +                      CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_ENABLE);
>> +     } else {
>> +             u32 val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
>> +
>> +             dev_dbg(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n",
>> +                     val);
>> +
>> +             val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
>> +             dev_dbg(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
>> +
>> +             val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
>> +             dev_dbg(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
>> +
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +                      (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +                      CSI_PP_DISABLE);
>> +
>> +             if (pg_mode) {
>> +                     tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
>> +                               ((pg_mode - 1) << PG_MODE_OFFSET) |
>> +                               PG_DISABLE);
>> +                     clk_disable_unprepare(csi->tpg_clk);
>> +             }
>> +
>> +             if (port->lanes == 4) {
>> +                     csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +                               CSI_A_PHY_CIL_DISABLE |
>> +                               CSI_B_PHY_CIL_DISABLE);
>> +
>> +             } else {
>> +                     u32 val = ((port_num & 1) == PORT_A) ?
>> +                               CSI_A_PHY_CIL_DISABLE | CSI_B_PHY_CIL_NOP :
>> +                               CSI_B_PHY_CIL_DISABLE | CSI_A_PHY_CIL_NOP;
>> +                     csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +                               val);
>> +             }
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int csi2_hw_init(struct tegra_csi_device *csi)
>> +{
>> +     struct tegra_csi_channel *csi_chan;
>> +     struct tegra_csi_port *port;
>> +     u8 portno;
>> +     int ret;
>> +
>> +     csi->cilab_clk = devm_clk_get(csi->dev, "cilab");
>> +     if (IS_ERR(csi->cilab_clk)) {
>> +             dev_err(csi->dev, "Failed to get cilab clock\n");
>> +             return PTR_ERR(csi->cilab_clk);
>> +     }
>> +
>> +     csi->cilcd_clk = devm_clk_get(csi->dev, "cilcd");
>> +     if (IS_ERR(csi->cilcd_clk)) {
>> +             dev_err(csi->dev, "Failed to get cilcd clock\n");
>> +             return PTR_ERR(csi->cilcd_clk);
>> +     }
>> +
>> +     csi->cilef_clk = devm_clk_get(csi->dev, "cile");
>> +     if (IS_ERR(csi->cilef_clk)) {
>> +             dev_err(csi->dev, "Failed to get cile clock\n");
>> +             return PTR_ERR(csi->cilef_clk);
>> +     }
>> +
>> +     csi->tpg_clk = devm_clk_get(csi->dev, "csi_tpg");
>> +     if (IS_ERR(csi->tpg_clk)) {
>> +             dev_err(csi->dev, "Failed to get csi_tpg clock\n");
>> +             return PTR_ERR(csi->tpg_clk);
>> +     }
>> +
>> +     csi->csi_clk = devm_clk_get(csi->dev, "csi");
>> +     if (IS_ERR(csi->csi_clk)) {
>> +             dev_err(csi->dev, "Failed to get csi clock\n");
>> +             return PTR_ERR(csi->csi_clk);
>> +     }
>> +
>> +     ret = clk_prepare_enable(csi->csi_clk);
>> +     if (ret) {
>> +             dev_err(csi->dev, "Failed to enable csi clk, err: %d\n", ret);
>> +             return ret;
>> +     }
>> +
>> +     list_for_each_entry(csi_chan, &csi->csi_chans, list) {
>> +             void __iomem *csi_pp_base;
>> +
>> +             port = csi_chan->ports;
>> +             portno = csi_chan->csi_port_num;
>> +             csi_pp_base = csi->iomem + CSI_PP_OFFSET(portno >> 1);
>> +             port->pixel_parser = csi_pp_base +
>> +                                  (portno % CSI_PORTS_PER_BRICK) *
>> +                                  TEGRA210_CSI_PORT_OFFSET;
>> +             port->cila = csi_pp_base + TEGRA210_CSI_CIL_OFFSET;
>> +             port->cilb = port->cila + TEGRA210_CSI_PORT_OFFSET;
>> +             port->tpg = port->pixel_parser + TEGRA210_CSI_TPG_OFFSET;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +const struct tegra_csi_fops csi2_fops = {
>> +     .hw_init = csi2_hw_init,
>> +     .csi_start_streaming = csi2_start_streaming,
>> +     .csi_err_status = csi2_error_status,
>> +};
> If I saw correctly, you don't have other instances of struct tegra_csi_fops with different functions.
> So why not exposing the functions directly instead of creating a global variable?
Currently driver supports Tegra210 only. Later we will add for Tegra186 
and Tegra184 support too where we will have separate csi fops.
>> +EXPORT_SYMBOL(csi2_fops);
>> diff --git a/drivers/staging/media/tegra/csi2_fops.h b/drivers/staging/media/tegra/csi2_fops.h
>> new file mode 100644
>> index 000000000000..cf22a28ceb1f
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/csi2_fops.h
>> @@ -0,0 +1,15 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __CSI2_H__
>> +#define __CSI2_H__
>> +
>> +#define      TEGRA210_TPG_CLOCK              594000000
>> +#define      TEGRA210_CSI_CIL_CLK_MAX        102000000
>> +#define TEGRA210_CSI_BRICKS_MAX              3
>> +
>> +extern const struct tegra_csi_fops csi2_fops;
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
>> new file mode 100644
>> index 000000000000..740806121e6b
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/host1x-video.c
>> @@ -0,0 +1,120 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/host1x.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "host1x-video.h"
>> +
>> +static int host1x_video_probe(struct host1x_device *dev)
>> +{
>> +     struct tegra_camera *cam;
>> +     int ret;
>> +
>> +     cam = devm_kzalloc(&dev->dev, sizeof(*cam), GFP_KERNEL);
>> +     if (!cam)
>> +             return -ENOMEM;
>> +
>> +     cam->dev = get_device(&dev->dev);
>> +     cam->media_dev.dev = cam->dev;
>> +     strscpy(cam->media_dev.model, "NVIDIA Tegra Video Input Device",
>> +             sizeof(cam->media_dev.model));
>> +     cam->media_dev.hw_revision = 3;
>> +
>> +     media_device_init(&cam->media_dev);
>> +     ret = media_device_register(&cam->media_dev);
>> +     if (ret < 0) {
>> +             dev_err(cam->dev, "failed to register media device: %d\n", ret);
>> +             return ret;
>> +     }
>> +
>> +     cam->v4l2_dev.mdev = &cam->media_dev;
>> +     ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
>> +     if (ret < 0) {
>> +             dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
>> +             goto register_error;
>> +     }
>> +
>> +     dev_set_drvdata(&dev->dev, cam);
>> +
>> +     ret = host1x_device_init(dev);
>> +     if (ret < 0)
>> +             goto dev_exit;
>> +
>> +     return 0;
>> +
>> +dev_exit:
>> +     host1x_device_exit(dev);
>> +     v4l2_device_unregister(&cam->v4l2_dev);
>> +register_error:
>> +     media_device_unregister(&cam->media_dev);
>> +     media_device_cleanup(&cam->media_dev);
>> +
>> +     return ret;
>> +}
>> +
>> +static int host1x_video_remove(struct host1x_device *dev)
>> +{
>> +     struct tegra_camera *cam = dev_get_drvdata(&dev->dev);
>> +
>> +     host1x_device_exit(dev);
>> +     v4l2_device_unregister(&cam->v4l2_dev);
>> +     media_device_unregister(&cam->media_dev);
>> +     media_device_cleanup(&cam->media_dev);
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct of_device_id host1x_video_subdevs[] = {
>> +     { .compatible = "nvidia,tegra210-csi", },
>> +     { .compatible = "nvidia,tegra210-vi", },
>> +     { }
>> +};
>> +
>> +static struct host1x_driver host1x_video_driver = {
>> +     .driver = {
>> +             .name = "host1x_video",
>> +     },
>> +     .probe = host1x_video_probe,
>> +     .remove = host1x_video_remove,
>> +     .subdevs = host1x_video_subdevs,
>> +};
>> +
>> +static struct platform_driver * const drivers[] = {
>> +     &tegra_csi_driver,
>> +     &tegra_vi_driver,
>> +};
>> +
>> +static int __init host1x_video_init(void)
>> +{
>> +     int err;
>> +
>> +     err = host1x_driver_register(&host1x_video_driver);
>> +     if (err < 0)
>> +             return err;
>> +
>> +     err = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
>> +     if (err < 0)
>> +             goto unregister_host1x;
>> +
>> +     return 0;
>> +
>> +unregister_host1x:
>> +     host1x_driver_unregister(&host1x_video_driver);
>> +     return err;
>> +}
>> +module_init(host1x_video_init);
>> +
>> +static void __exit host1x_video_exit(void)
>> +{
>> +     platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
>> +     host1x_driver_unregister(&host1x_video_driver);
>> +}
>> +module_exit(host1x_video_exit);
>> +
>> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
>> +MODULE_DESCRIPTION("NVIDIA Tegra Host1x Video driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>> new file mode 100644
>> index 000000000000..84d28e6f4362
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/host1x-video.h
>> @@ -0,0 +1,33 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef HOST1X_VIDEO_H
>> +#define HOST1X_VIDEO_H 1
>> +
>> +#include <linux/host1x.h>
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +#include "tegra-vi.h"
>> +#include "csi.h"
>> +
>> +struct tegra_camera {
>> +     struct v4l2_device v4l2_dev;
>> +     struct media_device media_dev;
>> +     struct device *dev;
> You can use cam->media_dev.dev instead of having this pointer.
>
>> +     struct tegra_vi *vi;
>> +     struct tegra_csi_device *csi;
>> +};
>> +
>> +extern struct platform_driver tegra_vi_driver;
>> +extern struct platform_driver tegra_csi_driver;
>> +
>> +#endif /* HOST1X_VIDEO_H */
>> diff --git a/drivers/staging/media/tegra/mc_common.h b/drivers/staging/media/tegra/mc_common.h
>> new file mode 100644
>> index 000000000000..9e88f3295ef4
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/mc_common.h
>> @@ -0,0 +1,131 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __MC_COMMON_H_
>> +#define __MC_COMMON_H_
>> +
>> +#include <linux/host1x.h>
>> +#include <linux/mutex.h>
>> +#include <linux/spinlock.h>
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +#include "tegra-core.h"
>> +#include "tegra-vi.h"
>> +#include "csi.h"
>> +
>> +#define MAX_FORMAT_NUM       64
>> +
>> +struct tegra_csi_fops {
>> +     int (*hw_init)(struct tegra_csi_device *csi);
>> +     int (*csi_start_streaming)(struct tegra_csi_channel *csi_chan,
>> +                                u8 pg_mode, int enable);
>> +     void (*csi_err_status)(struct tegra_csi_channel *csi_chan);
>> +};
>> +
>> +/**
>> + * struct tegra_channel - Tegra video channel
>> + * @list: list entry in a composite device dmas list
>> + * @video: V4L2 video device associated with the video channel
>> + * @video_lock: protects the @format and @queue fields
>> + * @pad: media pad for the video device entity
>> + *
>> + * @vi: composite device DT node port number for the channel
>> + *
>> + * @sp: host1x syncpoint pointer
>> + *
>> + * @kthread_capture_start: capture start kthread of this video channel
>> + * @start_wait: wait queue used by capture start kthread
>> + * @kthread_capture_done: capture done kthread of this video channel
>> + * @done_wait: wait queue used by capture done kthread
>> + *
>> + * @format: active V4L2 pixel format
>> + * @fmtinfo: format information corresponding to the active @format
>> + * @video_formats: supported video formats
>> + * @nformats: supported number of video formats
>> + *
>> + * @queue: vb2 buffers queue
>> + * @sequence: V4L2 buffers sequence number
>> + *
>> + * @capture: list of queued buffers for capture
>> + * @start_lock: protects the capture queued list
>> + * @done: list of capture done queued buffers
>> + * @done_lock: protects the capture done queue list
>> + *
>> + * @stride_align: channel buffer stride alignment
>> + * @width_align: channel buffer width alignment
>> + * @height_align: channel buffer height alignment
>> + * @size_align: channel buffer size alignment
>> +
>> + * @port: CSI port of this video channel
>> + *
>> + * @ctrl_handler: V4L2 control handler of this video channel
>> + * @tpg_fmts_bitmap: a bitmap for supported TPG formats
>> + */
>> +struct tegra_channel {
>> +     struct list_head list;
>> +     struct video_device video;
>> +     /* protects the @format and @queue fields */
>> +     struct mutex video_lock;
>> +     struct media_pad pad;
>> +
>> +     struct tegra_vi *vi;
>> +     struct host1x_syncpt *sp;
>> +
>> +     struct task_struct *kthread_capture_start;
>> +     wait_queue_head_t start_wait;
>> +     struct task_struct *kthread_capture_done;
>> +     wait_queue_head_t done_wait;
>> +
>> +     struct v4l2_pix_format format;
>> +     const struct tegra_video_format *fmtinfo;
>> +     const struct tegra_video_format *video_formats;
>> +     unsigned int nformats;
>> +     struct vb2_queue queue;
>> +     u32 sequence;
>> +
>> +     struct list_head capture;
>> +     /* protects the capture queued list */
>> +     spinlock_t start_lock;
>> +     struct list_head done;
>> +     /* protects the capture done queue list */
>> +     spinlock_t done_lock;
>> +
>> +     unsigned int stride_align;
>> +     unsigned int width_align;
>> +     unsigned int height_align;
>> +     unsigned int size_align;
>> +     unsigned char port;
>> +
>> +     struct v4l2_ctrl_handler ctrl_handler;
>> +     DECLARE_BITMAP(tpg_fmts_bitmap, MAX_FORMAT_NUM);
>> +};
>> +
>> +#define to_tegra_channel(vdev) \
>> +     container_of(vdev, struct tegra_channel, video)
> Why not inline instead of define. Inlines has the advantage of checking types.
>
>> +
>> +const struct tegra_video_format *tegra_core_get_default_format(void);
>> +u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
>> +                              unsigned int index);
>> +int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
>> +                            unsigned int offset);
>> +const struct tegra_video_format *
>> +tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc);
>> +
>> +int tegra_channel_init(struct tegra_channel *chan);
>> +int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan);
>> +int tegra_channel_cleanup(struct tegra_channel *chan);
>> +int tegra_channel_set_stream(struct tegra_channel *chan, bool on);
>> +void tegra_channel_queued_buf_done(struct tegra_channel *chan,
>> +                                enum vb2_buffer_state state);
>> +int tegra_channel_csi_error_status(struct tegra_channel *chan);
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/tegra-channel.c b/drivers/staging/media/tegra/tegra-channel.c
>> new file mode 100644
>> index 000000000000..7561f6fb8748
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-channel.c
>> @@ -0,0 +1,628 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/atomic.h>
>> +#include <linux/bitmap.h>
>> +#include <linux/clk.h>
>> +#include <linux/host1x.h>
>> +#include <linux/kthread.h>
>> +#include <linux/lcm.h>
>> +#include <linux/list.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +
>> +#include <media/v4l2-event.h>
>> +#include <media/v4l2-fh.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-dma-contig.h>
>> +
>> +#include <soc/tegra/pmc.h>
>> +
>> +#include "mc_common.h"
>> +#include "tegra-vi.h"
>> +#include "host1x-video.h"
>> +
>> +#define MAX_CID_CONTROLS             1
>> +
>> +static const char *const vi_pattern_strings[] = {
>> +     "Black/White Direct Mode",
>> +     "Color Patch Mode",
>> +};
>> +
>> +static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> +     struct tegra_channel *chan = container_of(ctrl->handler,
>> +                                               struct tegra_channel,
>> +                                               ctrl_handler);
>> +
>> +     switch (ctrl->id) {
>> +     case V4L2_CID_TEST_PATTERN:
>> +             chan->vi->pg_mode = ctrl->val + 1;
>> +             dev_info(chan->vi->dev, "TPG mode is set to %s\n",
>> +                      vi_pattern_strings[ctrl->val]);
>> +             break;
>> +
>> +     default:
>> +             dev_err(chan->vi->dev, "Invalid Tegra video control\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct v4l2_ctrl_ops vi_ctrl_ops = {
>> +     .s_ctrl = vi_s_ctrl,
>> +};
>> +
>> +/*
>> + * videobuf2 queue operations
>> + */
>> +static int tegra_channel_queue_setup(struct vb2_queue *vq,
>> +                                  unsigned int *nbuffers,
>> +                                  unsigned int *nplanes,
>> +                                  unsigned int sizes[],
>> +                                  struct device *alloc_devs[])
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vq);
>> +     unsigned int count = *nbuffers;
>> +
>> +     if (*nplanes)
>> +             return sizes[0] < chan->format.sizeimage ? -EINVAL : 0;
>> +
>> +     *nplanes = 1;
>> +     sizes[0] = chan->format.sizeimage;
>> +     alloc_devs[0] = chan->vi->dev;
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_buffer_prepare(struct vb2_buffer *vb)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
>> +     struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> +     struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
>> +     unsigned long size = chan->format.sizeimage;
>> +
>> +     if (vb2_plane_size(vb, 0) < size) {
>> +             v4l2_err(chan->video.v4l2_dev, "buffer too small (%lu < %lu)\n",
>> +                      vb2_plane_size(vb, 0), size);
>> +             return -EINVAL;
>> +     }
>> +
>> +     vb2_set_plane_payload(vb, 0, size);
>> +     buf->chan = chan;
>> +     buf->addr = vb2_dma_contig_plane_dma_addr(vb, 0);
>> +
>> +     return 0;
>> +}
>> +
>> +static void tegra_channel_buffer_queue(struct vb2_buffer *vb)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
>> +     struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> +     struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
>> +
>> +     /* put buffer into the capture queue */
>> +     spin_lock(&chan->start_lock);
>> +     list_add_tail(&buf->queue, &chan->capture);
>> +     spin_unlock(&chan->start_lock);
>> +
>> +     /* wait up kthread for capture */
>> +     wake_up_interruptible(&chan->start_wait);
>> +}
>> +
>> +int tegra_channel_csi_error_status(struct tegra_channel *chan)
>> +{
>> +     struct media_entity *entity;
>> +     struct media_pad *pad;
>> +     struct v4l2_subdev *subdev;
>> +
>> +     pad = media_entity_remote_pad(&chan->pad);
>> +     if (!pad)
>> +             return -ENODEV;
>> +
>> +     entity = pad->entity;
>> +     subdev = media_entity_to_v4l2_subdev(entity);
>> +
>> +     tegra_csi_error_status(subdev);
>> +
>> +     return 0;
>> +}
>> +
>> +static struct v4l2_subdev *
>> +tegra_channel_get_remote_subdev(struct tegra_channel *chan)
>> +{
>> +     struct media_pad *pad;
>> +     struct v4l2_subdev *subdev;
>> +     struct media_entity *entity;
>> +
>> +     pad = media_entity_remote_pad(&chan->pad);
>> +     entity = pad->entity;
>> +     subdev = media_entity_to_v4l2_subdev(entity);
>> +
>> +     return subdev;
>> +}
>> +
>> +int tegra_channel_set_stream(struct tegra_channel *chan, bool on)
>> +{
>> +     struct v4l2_subdev *subdev;
>> +     int ret;
>> +
>> +     /* stream CSI */
>> +     subdev = tegra_channel_get_remote_subdev(chan);
>> +     v4l2_set_subdev_hostdata(subdev, chan);
>> +     ret = v4l2_subdev_call(subdev, video, s_stream, on);
>> +     if (on && ret < 0 && ret != -ENOIOCTLCMD)
>> +             return ret;
>> +
>> +     return 0;
>> +}
>> +
>> +void tegra_channel_queued_buf_done(struct tegra_channel *chan,
>> +                                enum vb2_buffer_state state)
>> +{
>> +     struct tegra_channel_buffer *buf, *nbuf;
>> +
>> +     spin_lock(&chan->start_lock);
>> +     list_for_each_entry_safe(buf, nbuf, &chan->capture, queue) {
>> +             vb2_buffer_done(&buf->buf.vb2_buf, state);
>> +             list_del(&buf->queue);
>> +     }
>> +
>> +     spin_unlock(&chan->start_lock);
>> +}
>> +
>> +static int tegra_channel_start_streaming(struct vb2_queue *vq, u32 count)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vq);
>> +
>> +     if (chan->vi->fops->vi_start_streaming)
>> +             return chan->vi->fops->vi_start_streaming(vq, count);
>> +
>> +     return 0;
>> +}
>> +
>> +static void tegra_channel_stop_streaming(struct vb2_queue *vq)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vq);
>> +
>> +     if (chan->vi->fops->vi_start_streaming)
>> +             chan->vi->fops->vi_stop_streaming(vq);
>> +}
>> +
>> +static const struct vb2_ops tegra_channel_queue_qops = {
>> +     .queue_setup = tegra_channel_queue_setup,
>> +     .buf_prepare = tegra_channel_buffer_prepare,
>> +     .buf_queue = tegra_channel_buffer_queue,
>> +     .wait_prepare = vb2_ops_wait_prepare,
>> +     .wait_finish = vb2_ops_wait_finish,
>> +     .start_streaming = tegra_channel_start_streaming,
>> +     .stop_streaming = tegra_channel_stop_streaming,
>> +};
>> +
>> +/*
>> + * V4L2 ioctls
>> + */
>> +static int tegra_channel_querycap(struct file *file, void *fh,
>> +                               struct v4l2_capability *cap)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +
>> +     cap->device_caps = chan->video.device_caps;
>> +     cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
>> +     strscpy(cap->driver, "tegra-video", sizeof(cap->driver));
>> +     strscpy(cap->card, chan->video.name, sizeof(cap->card));
>> +     snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s:%u",
>> +              dev_name(chan->vi->dev), chan->port);
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_enum_format(struct file *file, void *fh,
>> +                                  struct v4l2_fmtdesc *f)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +     unsigned int index = 0, i;
>> +     unsigned long *fmts_bitmap = chan->tpg_fmts_bitmap;
>> +
>> +     if (f->index >= bitmap_weight(fmts_bitmap, MAX_FORMAT_NUM))
>> +             return -EINVAL;
>> +
>> +     for (i = 0; i < f->index + 1; i++, index++)
>> +             index = find_next_bit(fmts_bitmap, MAX_FORMAT_NUM, index);
>> +
>> +     f->pixelformat = tegra_core_get_fourcc_by_idx(chan, index - 1);
>> +
>> +     return 0;
>> +}
>> +
>> +static void
>> +tegra_channel_fmt_align(struct tegra_channel *chan,
>> +                     const struct tegra_frac *bpp,
>> +                     u32 *width, u32 *height, u32 *bytesperline)
>> +{
>> +     unsigned int min_width, max_width;
>> +     unsigned int min_bpl, max_bpl, bpl;
>> +     unsigned int align, fmt_align;
>> +     unsigned int temp_width, temp_bpl;
>> +     unsigned int numerator, denominator;
>> +
>> +     denominator = (!bpp->denominator) ? 1 : bpp->denominator;
>> +     numerator = (!bpp->numerator) ? 1 : bpp->numerator;
>> +     fmt_align = (denominator == 1) ? numerator : 1;
>> +     align = lcm(chan->width_align, fmt_align);
>> +     bpl = (*width * numerator) / denominator;
>> +
>> +     if (chan->vi->fops->vi_stride_align)
>> +             chan->vi->fops->vi_stride_align(&bpl);
>> +
>> +     if (!*bytesperline)
>> +             *bytesperline = bpl;
>> +
>> +     /*
>> +      * The transfer alignment requirements are expressed in bytes. Compute
>> +      * the minimum and maximum values, clamp the requested width and convert
>> +      * it back to pixels.
>> +      * use bytesperline to adjust width for applicaton related requriements.
>> +      */
>> +     min_width = roundup(TEGRA_MIN_WIDTH, align);
>> +     max_width = rounddown(TEGRA_MAX_WIDTH, align);
>> +     temp_width = roundup(bpl, align);
>> +     *width = (clamp(temp_width, min_width, max_width) * denominator) /
>> +                     numerator;
>> +     *height = clamp(*height, TEGRA_MIN_HEIGHT, TEGRA_MAX_HEIGHT);
>> +
>> +     /*
>> +      * Clamp the requested bytes per line value. If the maximum bytes per
>> +      * line value is zero, the module doesn't support user configurable line
>> +      * sizes. Override the requested value with the minimum in that case.
>> +      */
>> +     min_bpl = bpl;
>> +     max_bpl = rounddown(TEGRA_MAX_WIDTH, chan->stride_align);
>> +     temp_bpl = roundup(*bytesperline, chan->stride_align);
>> +     *bytesperline = clamp(temp_bpl, min_bpl, max_bpl);
>> +}
>> +
>> +static void tegra_channel_update_format(struct tegra_channel *chan, u32 width,
>> +                                     u32 height, u32 fourcc,
>> +                                     const struct tegra_frac *bpp,
>> +                                     u32 preferred_stride)
>> +{
>> +     u32 denominator = (!bpp->denominator) ? 1 : bpp->denominator;
>> +     u32 numerator = (!bpp->numerator) ? 1 : bpp->numerator;
>> +     u32 bytesperline = (width * numerator / denominator);
>> +     u32 sizeimage, height_aligned;
>> +
>> +     chan->format.width = width;
>> +     chan->format.height = height;
>> +     chan->format.pixelformat = fourcc;
>> +     chan->format.bytesperline = preferred_stride ?: bytesperline;
>> +
>> +     tegra_channel_fmt_align(chan, bpp,
>> +                             &chan->format.width,
>> +                             &chan->format.height,
>> +                             &chan->format.bytesperline);
>> +
>> +     /* calculate the sizeimage per plane */
>> +     height_aligned = roundup(chan->format.height, chan->height_align);
>> +     sizeimage = chan->format.bytesperline * height_aligned;
>> +     chan->format.sizeimage = roundup(sizeimage, chan->size_align);
>> +}
>> +
>> +static int tegra_channel_get_format(struct file *file, void *fh,
>> +                                 struct v4l2_format *format)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +
>> +     format->fmt.pix = chan->format;
>> +
>> +     return 0;
>> +}
>> +
>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>> +                                   struct v4l2_pix_format *pix,
>> +                                   const struct tegra_video_format **vfmt)
>> +{
>> +     const struct tegra_video_format *fmt_info;
>> +     struct v4l2_subdev *subdev;
>> +     struct v4l2_subdev_format fmt;
>> +     struct v4l2_subdev_pad_config *pad_cfg;
>> +
>> +     subdev = tegra_channel_get_remote_subdev(chan);
>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>> +     if (!pad_cfg)
>> +             return -ENOMEM;
>> +
>> +     /*
>> +      * Retrieve format information and select the default format if the
>> +      * requested format isn't supported.
>> +      */
>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>> +     if (!fmt_info) {
>> +             pix->pixelformat = chan->format.pixelformat;
>> +             pix->colorspace = chan->format.colorspace;
>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>> +                                                        pix->pixelformat);
>> +     }
>> +
>> +     /* Change this when start adding interlace format support */
>> +     pix->field = V4L2_FIELD_NONE;
>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>> +     fmt.pad = 0;
>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
> As fas as I understand, entities formats should be independent, it is up to link_validate
> to check formats between entities.
> The capture shouldn't change the format of the subdevice.
>
>
>> +
>> +     v4l2_fill_pix_format(pix, &fmt.format);
>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>> +                             &pix->bytesperline);
>> +     pix->sizeimage = pix->bytesperline * pix->height;
>> +
>> +     if (vfmt)
>> +             *vfmt = fmt_info;
>> +
>> +     v4l2_subdev_free_pad_config(pad_cfg);
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_try_format(struct file *file, void *fh,
>> +                                 struct v4l2_format *format)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +
>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>> +}
>> +
>> +static int tegra_channel_set_format(struct file *file, void *fh,
>> +                                 struct v4l2_format *format)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +     const struct tegra_video_format *info;
>> +     int ret;
>> +     struct v4l2_subdev_format fmt;
>> +     struct v4l2_subdev *subdev;
>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>> +
>> +     if (vb2_is_busy(&chan->queue))
>> +             return -EBUSY;
>> +
>> +     /* get supported format by try_fmt */
>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>> +     if (ret)
>> +             return ret;
>> +
>> +     subdev = tegra_channel_get_remote_subdev(chan);
>> +
>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>> +     fmt.pad = 0;
>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
> same here.
>
>> +
>> +     v4l2_fill_pix_format(pix, &fmt.format);
>> +     chan->format = *pix;
>> +     chan->fmtinfo = info;
>> +     tegra_channel_update_format(chan, pix->width,
>> +                                 pix->height, info->fourcc,
>> +                                 &info->bpp,
>> +                                 pix->bytesperline);
>> +     *pix = chan->format;
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>> +                                 struct v4l2_input *inp)
>> +{
>> +     /* Currently driver supports internal TPG only */
>> +     if (inp->index != 0)
> just
> if (inp->index)
>
>> +             return -EINVAL;
>> +
>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_g_input(struct file *file, void *priv,
>> +                              unsigned int *i)
>> +{
>> +     *i = 0;
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_s_input(struct file *file, void *priv,
>> +                              unsigned int input)
>> +{
>> +     if (input > 0)
>> +             return -EINVAL;
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct v4l2_ioctl_ops tegra_channel_ioctl_ops = {
>> +     .vidioc_querycap                = tegra_channel_querycap,
>> +     .vidioc_enum_fmt_vid_cap        = tegra_channel_enum_format,
>> +     .vidioc_g_fmt_vid_cap           = tegra_channel_get_format,
>> +     .vidioc_s_fmt_vid_cap           = tegra_channel_set_format,
>> +     .vidioc_try_fmt_vid_cap         = tegra_channel_try_format,
>> +     .vidioc_enum_input              = tegra_channel_enum_input,
>> +     .vidioc_g_input                 = tegra_channel_g_input,
>> +     .vidioc_s_input                 = tegra_channel_s_input,
>> +     .vidioc_reqbufs                 = vb2_ioctl_reqbufs,
>> +     .vidioc_prepare_buf             = vb2_ioctl_prepare_buf,
>> +     .vidioc_querybuf                = vb2_ioctl_querybuf,
>> +     .vidioc_qbuf                    = vb2_ioctl_qbuf,
>> +     .vidioc_dqbuf                   = vb2_ioctl_dqbuf,
>> +     .vidioc_create_bufs             = vb2_ioctl_create_bufs,
>> +     .vidioc_expbuf                  = vb2_ioctl_expbuf,
>> +     .vidioc_streamon                = vb2_ioctl_streamon,
>> +     .vidioc_streamoff               = vb2_ioctl_streamoff,
>> +     .vidioc_subscribe_event         = v4l2_ctrl_subscribe_event,
>> +     .vidioc_unsubscribe_event       = v4l2_event_unsubscribe,
>> +};
>> +
>> +/*
>> + * V4L2 file operations
>> + */
>> +static const struct v4l2_file_operations tegra_channel_fops = {
>> +     .owner          = THIS_MODULE,
>> +     .unlocked_ioctl = video_ioctl2,
>> +     .open           = v4l2_fh_open,
>> +     .release        = vb2_fop_release,
>> +     .read           = vb2_fop_read,
>> +     .poll           = vb2_fop_poll,
>> +     .mmap           = vb2_fop_mmap,
>> +};
>> +
>> +int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan)
>> +{
>> +     int ret;
>> +
>> +     /* Add test pattern control handler to v4l2 device */
>> +     v4l2_ctrl_new_std_menu_items(&chan->ctrl_handler, &vi_ctrl_ops,
>> +                                  V4L2_CID_TEST_PATTERN,
>> +                                  ARRAY_SIZE(vi_pattern_strings) - 1,
>> +                                  0, 0, vi_pattern_strings);
>> +     if (chan->ctrl_handler.error) {
>> +             dev_err(chan->vi->dev, "failed to add TPG ctrl handler\n");
>> +             v4l2_ctrl_handler_free(&chan->ctrl_handler);
>> +             return chan->ctrl_handler.error;
>> +     }
>> +
>> +     /* setup the controls */
>> +     ret = v4l2_ctrl_handler_setup(&chan->ctrl_handler);
>> +     if (ret < 0) {
>> +             dev_err(chan->vi->dev, "failed to setup v4l2 ctrl handler\n");
>> +             goto free_hdl;
>> +     }
>> +
>> +     return 0;
>> +
>> +free_hdl:
>> +     v4l2_ctrl_handler_free(&chan->ctrl_handler);
>> +     return ret;
>> +}
>> +
>> +int tegra_channel_init(struct tegra_channel *chan)
>> +{
>> +     struct tegra_vi *vi = chan->vi;
>> +     struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>> +     int ret;
>> +
>> +     mutex_init(&chan->video_lock);
>> +     INIT_LIST_HEAD(&chan->capture);
>> +     INIT_LIST_HEAD(&chan->done);
>> +     spin_lock_init(&chan->start_lock);
>> +     spin_lock_init(&chan->done_lock);
>> +     init_waitqueue_head(&chan->start_wait);
>> +     init_waitqueue_head(&chan->done_wait);
>> +
>> +     /* Default alignments */
>> +     chan->width_align = TEGRA_WIDTH_ALIGNMENT;
>> +     chan->stride_align = TEGRA_STRIDE_ALIGNMENT;
>> +     chan->height_align = TEGRA_HEIGHT_ALIGNMENT;
>> +     chan->size_align = TEGRA_SIZE_ALIGNMENT;
>> +
>> +     /* initialize the video format */
>> +     chan->fmtinfo = tegra_core_get_default_format();
>> +     chan->format.colorspace = V4L2_COLORSPACE_SRGB;
>> +     chan->format.field = V4L2_FIELD_NONE;
>> +     tegra_channel_update_format(chan, TEGRA_DEF_WIDTH, TEGRA_DEF_HEIGHT,
>> +                                 chan->fmtinfo->fourcc,
>> +                                 &chan->fmtinfo->bpp, 0);
>> +
>> +     /* initialize the media entity */
>> +     chan->pad.flags = MEDIA_PAD_FL_SINK;
>> +     ret = media_entity_pads_init(&chan->video.entity, 1, &chan->pad);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     ret = v4l2_ctrl_handler_init(&chan->ctrl_handler, MAX_CID_CONTROLS);
>> +     if (chan->ctrl_handler.error) {
>> +             dev_err(vi->dev,
>> +                     "V4L2 controls handler init failed: %d\n", ret);
>> +             goto ctrl_init_error;
>> +     }
>> +
>> +     /* initialize the video_device */
>> +     chan->video.fops = &tegra_channel_fops;
>> +     chan->video.v4l2_dev = &cam->v4l2_dev;
>> +     chan->video.queue = &chan->queue;
>> +     snprintf(chan->video.name, sizeof(chan->video.name), "%s-%s-%u",
>> +              dev_name(vi->dev), "output", chan->port);
>> +     chan->video.vfl_type = VFL_TYPE_GRABBER;
>> +     chan->video.vfl_dir = VFL_DIR_RX;
>> +     chan->video.release = video_device_release_empty;
>> +     chan->video.ioctl_ops = &tegra_channel_ioctl_ops;
>> +     chan->video.ctrl_handler = &chan->ctrl_handler;
>> +     chan->video.lock = &chan->video_lock;
>> +     chan->video.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
>> +                               V4L2_CAP_READWRITE;
>> +
>> +     video_set_drvdata(&chan->video, chan);
>> +     chan->sp = host1x_syncpt_request(&vi->client, HOST1X_SYNCPT_HAS_BASE);
>> +     if (!chan->sp) {
>> +             dev_err(vi->dev, "failed to request syncpoint\n");
>> +             ret = -ENOMEM;
>> +             goto host1x_sp_error;
>> +     }
>> +
>> +     chan->queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> +     chan->queue.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
>> +     chan->queue.lock = &chan->video_lock;
>> +     chan->queue.drv_priv = chan;
>> +     chan->queue.buf_struct_size = sizeof(struct tegra_channel_buffer);
>> +     chan->queue.ops = &tegra_channel_queue_qops;
>> +     chan->queue.mem_ops = &vb2_dma_contig_memops;
>> +     chan->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
>> +                                | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;
>> +     chan->queue.dev = vi->dev;
>> +     ret = vb2_queue_init(&chan->queue);
>> +     if (ret < 0) {
>> +             dev_err(vi->dev,
>> +                     "failed to initialize VB2 queue, err: %d\n", ret);
>> +             goto vb2_init_error;
>> +     }
>> +
>> +     ret = video_register_device(&chan->video, VFL_TYPE_GRABBER, -1);
>> +     if (ret < 0) {
>> +             dev_err(&chan->video.dev,
>> +                     "failed to register video device, err: %d\n", ret);
>> +             goto video_register_error;
>> +     }
>> +
>> +     return 0;
>> +
>> +video_register_error:
>> +     vb2_queue_release(&chan->queue);
>> +vb2_init_error:
>> +     host1x_syncpt_free(chan->sp);
>> +host1x_sp_error:
>> +     v4l2_ctrl_handler_free(&chan->ctrl_handler);
>> +ctrl_init_error:
>> +     media_entity_cleanup(&chan->video.entity);
>> +     return ret;
>> +}
>> +
>> +int tegra_channel_cleanup(struct tegra_channel *chan)
>> +{
>> +     if (video_is_registered(&chan->video)) {
>> +             video_unregister_device(&chan->video);
>> +             vb2_queue_release(&chan->queue);
>> +             media_entity_cleanup(&chan->video.entity);
>> +     }
>> +
>> +     host1x_syncpt_free(chan->sp);
>> +     v4l2_ctrl_handler_free(&chan->ctrl_handler);
>> +
>> +     return 0;
>> +}
>> diff --git a/drivers/staging/media/tegra/tegra-core.c b/drivers/staging/media/tegra/tegra-core.c
>> new file mode 100644
>> index 000000000000..80ede3ad7266
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-core.c
>> @@ -0,0 +1,111 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/export.h>
>> +#include <linux/kernel.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "mc_common.h"
>> +#include "tegra-core.h"
>> +
>> +static const struct tegra_video_format tegra_default_format = {
>> +     /* RAW 10 */
>> +     TEGRA_VF_RAW10,
>> +     10,
>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>> +     {2, 1},
>> +     TEGRA_IMAGE_FORMAT_DEF,
>> +     TEGRA_IMAGE_DT_RAW10,
>> +     V4L2_PIX_FMT_SRGGB10,
>> +     "RGRG.. GBGB..",
> It would be more readable to do:
>
> .code = TEGRA_VF_RAW10,
> .width = 10,
> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>
> and so on
>
>> +};
>> +
>> +/*
>> + * Helper functions
>> + */
>> +
>> +/**
>> + * tegra_core_get_default_format - Get default format
>> + *
>> + * Return: pointer to the format where the default format needs
>> + * to be filled in.
>> + */
>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>> +{
>> +     return &tegra_default_format;
>> +}
> This is only used in tegra-channel.c, why not to declare it there as static?
>
>> +
>> +/**
>> + * tegra_core_get_fourcc_by_idx - get fourcc of a tegra_video format
>> + * @index: array index of the tegra_video_formats
>> + *
>> + * Return: fourcc code
>> + */
>> +u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
>> +                              unsigned int index)
> same here
>
>> +{
>> +     if (index >= chan->nformats)
>> +             return -EINVAL;
>> +
>> +     return chan->video_formats[index].fourcc;
>> +}
>> +
>> +/**
>> + * tegra_core_get_word_count - Calculate word count
>> + * @frame_width: number of pixels per line
>> + * @fmt: Tegra Video format struct which has BPP information
>> + *
>> + * Return: word count number
>> + */
>> +u32 tegra_core_get_word_count(unsigned int frame_width,
>> +                           const struct tegra_video_format *fmt)
> This is only used in vi2_fops.c, can be declared there as static.
>
>> +{
>> +     return frame_width * fmt->width / 8;
>> +}
>> +
>> +/**
>> + * tegra_core_get_idx_by_code - Retrieve index for a media bus code
>> + * @chan: tegra_channel
>> + * @code: the format media bus code
>> + * @offset: offset in video formats from where to start the search
>> + *
>> + * Return: a index to the format information structure corresponding to the
>> + * given V4L2 media bus format @code, or -1 if no corresponding format can
>> + * be found.
>> + */
>> +int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
>> +                            unsigned int offset)
> same here, this is only used by tegra-vi.c
>
> Please, check the other functions too, if a function is
> used only in one place, no need to export it in a header.
>
>> +{
>> +     unsigned int i;
>> +
>> +     for (i = offset; i < chan->nformats; ++i) {
>> +             if (chan->video_formats[i].code == code)
>> +                     return i;
>> +     }
>> +
>> +     return -1;
>> +}
>> +
>> +/**
>> + * tegra_core_get_format_by_fourcc - Retrieve format information for a 4CC
>> + * @fourcc: the format 4CC
>> + *
>> + * Return: a pointer to the format information structure corresponding to the
>> + * given V4L2 format @fourcc, or NULL if no corresponding format can be
>> + * found.
>> + */
>> +const struct tegra_video_format *
>> +tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc)
>> +{
> same here, only used by tegra-channel.c
>
>> +     unsigned int i;
>> +
>> +     for (i = 0; i < chan->nformats; ++i) {
>> +             if (chan->video_formats[i].fourcc == fourcc)
>> +                     return &chan->video_formats[i];
>> +     }
>> +
>> +     return NULL;
>> +}
>> diff --git a/drivers/staging/media/tegra/tegra-core.h b/drivers/staging/media/tegra/tegra-core.h
>> new file mode 100644
>> index 000000000000..193065d20a95
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-core.h
>> @@ -0,0 +1,125 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __TEGRA_CORE_H__
>> +#define __TEGRA_CORE_H__
>> +
>> +#include <media/v4l2-subdev.h>
>> +
>> +/* Minimum and maximum width and height common to Tegra video input device. */
>> +#define TEGRA_MIN_WIDTH              32U
>> +#define TEGRA_MAX_WIDTH              32768U
>> +#define TEGRA_MIN_HEIGHT     32U
>> +#define TEGRA_MAX_HEIGHT     32768U
>> +
>> +/* Width alignment */
>> +#define TEGRA_WIDTH_ALIGNMENT        1
>> +/* Stride alignment */
>> +#define TEGRA_STRIDE_ALIGNMENT       1
>> +/* Height alignment */
>> +#define TEGRA_HEIGHT_ALIGNMENT       1
>> +/* Size alignment */
>> +#define TEGRA_SIZE_ALIGNMENT 1
>> +
>> +/* 1080p resolution as default resolution for test pattern generator */
>> +#define TEGRA_DEF_WIDTH              1920
>> +#define TEGRA_DEF_HEIGHT     1080
>> +
>> +#define TEGRA_VF_DEF         MEDIA_BUS_FMT_SRGGB10_1X10
>> +#define TEGRA_IMAGE_FORMAT_DEF       32
>> +
>> +/*
>> + * These go into the TEGRA_VI_CSI_n_CSI_IMAGE_DT registers bits 7:0
>> + * Input data type of VI channel.
>> + */
>> +enum tegra_image_dt {
>> +     TEGRA_IMAGE_DT_YUV420_8 = 24,
>> +     TEGRA_IMAGE_DT_YUV420_10,
>> +
>> +     TEGRA_IMAGE_DT_YUV420CSPS_8 = 28,
>> +     TEGRA_IMAGE_DT_YUV420CSPS_10,
>> +     TEGRA_IMAGE_DT_YUV422_8,
>> +     TEGRA_IMAGE_DT_YUV422_10,
>> +     TEGRA_IMAGE_DT_RGB444,
>> +     TEGRA_IMAGE_DT_RGB555,
>> +     TEGRA_IMAGE_DT_RGB565,
>> +     TEGRA_IMAGE_DT_RGB666,
>> +     TEGRA_IMAGE_DT_RGB888,
>> +
>> +     TEGRA_IMAGE_DT_RAW6 = 40,
>> +     TEGRA_IMAGE_DT_RAW7,
>> +     TEGRA_IMAGE_DT_RAW8,
>> +     TEGRA_IMAGE_DT_RAW10,
>> +     TEGRA_IMAGE_DT_RAW12,
>> +     TEGRA_IMAGE_DT_RAW14,
>> +};
>> +
>> +/* Supported CSI to VI Data Formats */
>> +enum tegra_vf_code {
>> +     TEGRA_VF_RAW6 = 0,
>> +     TEGRA_VF_RAW7,
>> +     TEGRA_VF_RAW8,
>> +     TEGRA_VF_RAW10,
>> +     TEGRA_VF_RAW12,
>> +     TEGRA_VF_RAW14,
>> +     TEGRA_VF_EMBEDDED8,
>> +     TEGRA_VF_RGB565,
>> +     TEGRA_VF_RGB555,
>> +     TEGRA_VF_RGB888,
>> +     TEGRA_VF_RGB444,
>> +     TEGRA_VF_RGB666,
>> +     TEGRA_VF_YUV422,
>> +     TEGRA_VF_YUV420,
>> +     TEGRA_VF_YUV420_CSPS,
>> +};
>> +
>> +/**
>> + * struct tegra_frac
>> + * @numerator: numerator of the fraction
>> + * @denominator: denominator of the fraction
>> + */
>> +struct tegra_frac {
>> +     unsigned int numerator;
>> +     unsigned int denominator;
>> +};
>> +
>> +/**
>> + * struct tegra_video_format - Tegra video format description
>> + * @vf_code: video format code
>> + * @width: format width in bits per component
>> + * @code: media bus format code
>> + * @bpp: bytes per pixel (when stored in memory)
>> + * @img_fmt: image format
>> + * @img_dt: image data type
>> + * @fourcc: V4L2 pixel format FCC identifier
>> + * @description: format description, suitable for userspace
>> + */
>> +struct tegra_video_format {
>> +     enum tegra_vf_code vf_code;
>> +     unsigned int width;
>> +     unsigned int code;
>> +     struct tegra_frac bpp;
>> +     u32 img_fmt;
>> +     enum tegra_image_dt img_dt;
>> +     u32 fourcc;
>> +     __u8 description[32];
>> +};
>> +
>> +#define      TEGRA_VIDEO_FORMAT(VF_CODE, BPP, MBUS_CODE, FRAC_BPP_NUM,       \
>> +     FRAC_BPP_DEN, FORMAT, DATA_TYPE, FOURCC, DESCRIPTION)           \
>> +{                                                                    \
>> +     TEGRA_VF_##VF_CODE,                                             \
>> +     BPP,                                                            \
>> +     MEDIA_BUS_FMT_##MBUS_CODE,                                      \
>> +     {FRAC_BPP_NUM, FRAC_BPP_DEN},                                   \
>> +     TEGRA_IMAGE_FORMAT_##FORMAT,                                    \
>> +     TEGRA_IMAGE_DT_##DATA_TYPE,                                     \
>> +     V4L2_PIX_FMT_##FOURCC,                                          \
>> +     DESCRIPTION,                                                    \
>> +}
>> +
>> +u32 tegra_core_get_word_count(unsigned int frame_width,
>> +                           const struct tegra_video_format *fmt);
>> +#endif
>> diff --git a/drivers/staging/media/tegra/tegra-csi.c b/drivers/staging/media/tegra/tegra-csi.c
>> new file mode 100644
>> index 000000000000..f6153acd60cb
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-csi.c
>> @@ -0,0 +1,380 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk/tegra.h>
>> +#include <linux/device.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/host1x.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include "csi.h"
>> +#include "mc_common.h"
>> +#include "csi2_fops.h"
>> +#include "host1x-video.h"
>> +#include "vi2_registers.h"
>> +
>> +static inline struct tegra_csi_device *
>> +host1x_client_to_csi(struct host1x_client *client)
>> +{
>> +     return container_of(client, struct tegra_csi_device, client);
>> +}
>> +
>> +static inline struct tegra_csi_channel *to_csi_chan(struct v4l2_subdev *subdev)
>> +{
>> +     return container_of(subdev, struct tegra_csi_channel, subdev);
>> +}
>> +
>> +/*
>> + * V4L2 Subdevice Video Operations
>> + */
>> +static int tegra_csi_s_stream(struct v4l2_subdev *subdev, int enable)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +     struct tegra_channel *chan = subdev->host_priv;
>> +     u8 pg_mode = chan->vi->pg_mode;
>> +
>> +     return csi->fops->csi_start_streaming(csi_chan, pg_mode, enable);
>> +}
>> +
>> +/*
>> + * Only use this subdevice media bus ops for test pattern generator,
>> + * because CSI device is an separated subdevice which has 6 source
>> + * pads to generate test pattern.
>> + */
>> +static struct v4l2_mbus_framefmt tegra_csi_tpg_fmts[] = {
>> +     {
>> +             TEGRA_DEF_WIDTH,
>> +             TEGRA_DEF_HEIGHT,
>> +             MEDIA_BUS_FMT_SRGGB10_1X10,
>> +             V4L2_FIELD_NONE,
>> +             V4L2_COLORSPACE_SRGB
>> +     },
>> +     {
>> +             TEGRA_DEF_WIDTH,
>> +             TEGRA_DEF_HEIGHT,
>> +             MEDIA_BUS_FMT_RGB888_1X32_PADHI,
>> +             V4L2_FIELD_NONE,
>> +             V4L2_COLORSPACE_SRGB
>> +     }
>> +
>> +};
>> +
>> +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>> +     {1280, 720},
>> +     {1920, 1080},
>> +     {3840, 2160},
>> +};
>> +
>> +/*
>> + * V4L2 Subdevice Pad Operations
>> + */
>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>> +                             struct v4l2_subdev_pad_config *cfg,
>> +                             struct v4l2_subdev_format *fmt)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +
>> +     mutex_lock(&csi_chan->format_lock);
> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>
>> +     memcpy(fmt, &csi_chan->ports->format,
>> +            sizeof(struct v4l2_mbus_framefmt));
> I would prefer just:
> *fmt = *csi_chan->ports->format;
>
> I think it is easier to read IMHO.
> same in tegra_csi_set_format().
>
>> +     mutex_unlock(&csi_chan->format_lock);
>> +
>> +     return 0;
>> +}
>> +
>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>> +                                struct v4l2_mbus_framefmt *mfmt)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +     const struct v4l2_frmsize_discrete *sizes;
>> +     int i, j;
> unsigned
>
>> +
>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>> +
>> +             if (mfmt->code == mbus_fmt->code) {
>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>> +                             sizes = &tegra_csi_tpg_sizes[j];
>> +                             if (mfmt->width == sizes->width &&
>> +                                 mfmt->height == sizes->height) {
>> +                                     return;
>> +                             }
>> +                     }
>> +             }
>> +
>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>> +     }
>> +
>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>> +}
>> +
>> +static int tegra_csi_set_format(struct v4l2_subdev *subdev,
>> +                             struct v4l2_subdev_pad_config *cfg,
>> +                             struct v4l2_subdev_format *fmt)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +     struct v4l2_mbus_framefmt *format = &fmt->format;
>> +
>> +     tegra_csi_try_mbus_fmt(subdev, format);
>> +
>> +     if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
>> +             return 0;
>> +
>> +     mutex_lock(&csi_chan->format_lock);
>> +     memcpy(&csi_chan->ports->format, format,
>> +            sizeof(struct v4l2_mbus_framefmt));
>> +     mutex_unlock(&csi_chan->format_lock);
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * V4L2 Subdevice Operations
>> + */
>> +static struct v4l2_subdev_video_ops tegra_csi_video_ops = {
>> +     .s_stream = tegra_csi_s_stream,
>> +};
>> +
>> +static struct v4l2_subdev_pad_ops tegra_csi_pad_ops = {
>> +     .get_fmt                = tegra_csi_get_format,
>> +     .set_fmt                = tegra_csi_set_format,
>> +};
>> +
>> +static struct v4l2_subdev_ops tegra_csi_ops = {
>> +     .video  = &tegra_csi_video_ops,
>> +     .pad    = &tegra_csi_pad_ops,
>> +};
>> +
>> +/*
>> + * Media Operations
>> + */
>> +static const struct media_entity_operations tegra_csi_media_ops = {
>> +     .link_validate = v4l2_subdev_link_validate,
>> +};
>> +
>> +static int tegra_csi_tpg_channels_alloc(struct tegra_csi_device *csi)
>> +{
>> +     struct device_node *node = csi->dev->of_node;
>> +     unsigned int port_num;
>> +     int ret;
>> +     struct tegra_csi_channel *item;
>> +     unsigned int tpg_channels = csi->soc_data->num_tpg_channels;
>> +
>> +     /* allocate CSI channel for each CSI x2 ports */
>> +     for (port_num = 0; port_num < tpg_channels; port_num++) {
>> +             item = devm_kzalloc(csi->dev, sizeof(*item), GFP_KERNEL);
>> +             if (!item) {
>> +                     ret = -ENOMEM;
>> +                     goto error;
>> +             }
>> +
>> +             list_add_tail(&item->list, &csi->csi_chans);
>> +             item->csi = csi;
>> +             item->csi_port_num = port_num;
>> +             item->numlanes = 2;
>> +             item->of_node = node;
>> +             item->numpads = 1;
>> +             item->pads[0].flags = MEDIA_PAD_FL_SOURCE;
>> +     }
>> +
>> +     return 0;
>> +
>> +error:
>> +     list_for_each_entry(item, &csi->csi_chans, list)
>> +             list_del(&item->list);
>> +
>> +     return ret;
>> +}
>> +
>> +static int tegra_csi_channel_init(struct tegra_csi_channel *chan)
>> +{
>> +     struct tegra_csi_device *csi = chan->csi;
>> +     struct v4l2_subdev *subdev;
>> +     int ret;
>> +
>> +     chan->ports = devm_kzalloc(csi->dev, sizeof(struct tegra_csi_port),
>> +                                GFP_KERNEL);
>> +     if (!chan->ports)
>> +             return -ENOMEM;
>> +
>> +     mutex_init(&chan->format_lock);
>> +
>> +     /* initialize the default format */
>> +     chan->ports->format.code = TEGRA_VF_DEF;
>> +     chan->ports->format.field = V4L2_FIELD_NONE;
>> +     chan->ports->format.colorspace = V4L2_COLORSPACE_SRGB;
>> +     chan->ports->format.width = TEGRA_DEF_WIDTH;
>> +     chan->ports->format.height = TEGRA_DEF_HEIGHT;
>> +     chan->ports->lanes = chan->numlanes;
>> +
>> +     /* initialize V4L2 subdevice and media entity */
>> +     subdev = &chan->subdev;
>> +     v4l2_subdev_init(subdev, &tegra_csi_ops);
>> +     subdev->dev = csi->dev;
>> +     snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "%s-%d", "tpg",
>> +              chan->csi_port_num);
>> +
>> +     v4l2_set_subdevdata(subdev, chan);
>> +     subdev->fwnode = of_fwnode_handle(chan->of_node);
>> +     subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +     subdev->entity.ops = &tegra_csi_media_ops;
>> +
>> +     /* initialize media entity pads */
>> +     ret = media_entity_pads_init(&subdev->entity, chan->numpads,
>> +                                  chan->pads);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     ret = v4l2_async_register_subdev(subdev);
>> +     if (ret < 0) {
>> +             dev_err(csi->dev, "failed to register subdev\n");
>> +             media_entity_cleanup(&subdev->entity);
>> +     }
>> +
>> +     return ret;
>> +}
>> +
>> +void tegra_csi_error_status(struct v4l2_subdev *subdev)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +
>> +     csi->fops->csi_err_status(csi_chan);
>> +}
>> +EXPORT_SYMBOL(tegra_csi_error_status);
>> +
>> +static int tegra_csi_init(struct host1x_client *client)
>> +{
>> +     struct tegra_csi_device *csi = host1x_client_to_csi(client);
>> +     struct tegra_camera *cam = dev_get_drvdata(client->host);
>> +     struct tegra_csi_channel *item;
>> +     int ret;
>> +
>> +     cam->csi = csi;
>> +
>> +     INIT_LIST_HEAD(&csi->csi_chans);
>> +
>> +     ret = tegra_csi_tpg_channels_alloc(csi);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     list_for_each_entry(item, &csi->csi_chans, list) {
>> +             ret = tegra_csi_channel_init(item);
>> +             if (ret)
>> +                     return ret;
>> +     }
>> +
>> +     ret = csi->fops->hw_init(csi);
>> +     if (ret)
>> +             return ret;
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_csi_exit(struct host1x_client *client)
>> +{
>> +     struct tegra_camera *cam = dev_get_drvdata(client->host);
>> +     struct v4l2_subdev *subdev;
>> +     struct tegra_csi_channel *chan;
>> +
>> +     if (!cam->csi)
>> +             return 0;
>> +
>> +     list_for_each_entry(chan, &cam->csi->csi_chans, list) {
>> +             mutex_destroy(&chan->format_lock);
>> +             subdev = &chan->subdev;
>> +             media_entity_cleanup(&subdev->entity);
>> +             v4l2_async_unregister_subdev(subdev);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct host1x_client_ops csi_client_ops = {
>> +     .init = tegra_csi_init,
>> +     .exit = tegra_csi_exit,
>> +};
>> +
>> +static int tegra_csi_probe(struct platform_device *pdev)
>> +{
>> +     struct tegra_csi_device *csi;
>> +     struct resource *res;
>> +     int ret;
>> +
>> +     csi = devm_kzalloc(&pdev->dev, sizeof(*csi), GFP_KERNEL);
>> +     if (!csi)
>> +             return -ENOMEM;
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     csi->iomem = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(csi->iomem))
>> +             return PTR_ERR(csi->iomem);
>> +
>> +     csi->soc_data = of_device_get_match_data(&pdev->dev);
>> +     if (!csi->soc_data) {
>> +             dev_info(&pdev->dev, "No platform data\n\n");
>> +             return -ENODATA;
>> +     }
>> +
>> +     csi->dev = &pdev->dev;
>> +     csi->fops = csi->soc_data->csi_fops;
>> +     platform_set_drvdata(pdev, csi);
>> +
>> +     /* initialize host1x interface */
>> +     INIT_LIST_HEAD(&csi->client.list);
>> +     csi->client.ops = &csi_client_ops;
>> +     csi->client.dev = &pdev->dev;
>> +
>> +     ret = host1x_client_register(&csi->client);
>> +     if (ret < 0) {
>> +             dev_err(csi->dev, "failed to register host1x client: %d\n",
>> +                     ret);
>> +             return -ENODEV;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_csi_remove(struct platform_device *pdev)
>> +{
>> +     struct tegra_csi_device *csi = platform_get_drvdata(pdev);
>> +
>> +     host1x_client_unregister(&csi->client);
>> +
>> +     return 0;
>> +}
>> +
>> +static struct tegra_csi_soc_data tegra210_csi_data = {
>> +     .csi_fops = &csi2_fops,
>> +     .cil_max_clk_hz = TEGRA210_CSI_CIL_CLK_MAX,
>> +     .num_tpg_channels = TEGRA210_MAX_CHANNELS,
>> +};
>> +
>> +static const struct of_device_id tegra_csi_of_id_table[] = {
>> +     { .compatible = "nvidia,tegra210-csi", .data = &tegra210_csi_data },
>> +     { }
>> +};
>> +MODULE_DEVICE_TABLE(of, tegra_csi_of_id_table);
>> +
>> +struct platform_driver tegra_csi_driver = {
>> +     .driver = {
>> +             .name           = "tegra-csi",
>> +             .of_match_table = tegra_csi_of_id_table,
>> +     },
>> +     .probe                  = tegra_csi_probe,
>> +     .remove                 = tegra_csi_remove,
>> +};
>> +
>> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
>> +MODULE_DESCRIPTION("NVIDIA Tegra CSI Device Driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/staging/media/tegra/tegra-vi.c b/drivers/staging/media/tegra/tegra-vi.c
>> new file mode 100644
>> index 000000000000..6f5950b7988e
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-vi.c
>> @@ -0,0 +1,351 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/host1x.h>
>> +#include <linux/list.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/reset.h>
>> +#include <linux/slab.h>
>> +
>> +#include <media/v4l2-common.h>
>> +#include <media/v4l2-fwnode.h>
>> +
>> +#include <soc/tegra/pmc.h>
>> +
>> +#include "host1x-video.h"
>> +#include "mc_common.h"
>> +#include "vi2_formats.h"
>> +#include "vi2_registers.h"
>> +#include "vi2_fops.h"
>> +#include "tegra-vi.h"
>> +
>> +static inline struct tegra_vi *
>> +host1x_client_to_vi(struct host1x_client *client)
>> +{
>> +     return container_of(client, struct tegra_vi, client);
>> +}
>> +
>> +/* VI only support 2 formats in TPG mode */
>> +static void vi_tpg_fmts_bitmap_init(struct tegra_channel *chan)
>> +{
>> +     int index;
>> +
>> +     bitmap_zero(chan->tpg_fmts_bitmap, MAX_FORMAT_NUM);
>> +
>> +     index = tegra_core_get_idx_by_code(chan,
>> +                                        MEDIA_BUS_FMT_SRGGB10_1X10, 0);
>> +     bitmap_set(chan->tpg_fmts_bitmap, index, 1);
>> +
>> +     index = tegra_core_get_idx_by_code(chan,
>> +                                        MEDIA_BUS_FMT_RGB888_1X32_PADHI, 0);
>> +     bitmap_set(chan->tpg_fmts_bitmap, index, 1);
>> +}
>> +
>> +int tegra_vi_power_on(struct tegra_vi *vi)
>> +{
>> +     int ret;
>> +
>> +     ret = regulator_enable(vi->vi_reg);
>> +     if (ret)
>> +             return ret;
>> +
>> +     ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_VENC,
>> +                                             vi->vi_clk, vi->vi_rst);
>> +     if (ret) {
>> +             dev_err(vi->dev, "failed to power up!\n");
>> +             goto error_power_up;
>> +     }
>> +
>> +     ret = clk_set_rate(vi->vi_clk, vi->soc_data->vi_max_clk_hz);
>> +     if (ret) {
>> +             dev_err(vi->dev, "failed to set vi clk rate, err: %d\n", ret);
>> +             goto error_clk_set_rate;
>> +     }
>> +
>> +     ret = clk_prepare_enable(vi->vi_clk);
>> +     if (ret) {
>> +             dev_err(vi->dev, "failed to enable vi clk, err: %d\n", ret);
>> +             goto error_clk_set_rate;
>> +     }
>> +
>> +     return 0;
>> +
>> +error_clk_set_rate:
>> +     tegra_powergate_power_off(TEGRA_POWERGATE_VENC);
>> +
>> +error_power_up:
>> +     regulator_disable(vi->vi_reg);
>> +
>> +     return ret;
>> +}
>> +
>> +void tegra_vi_power_off(struct tegra_vi *vi)
>> +{
>> +     reset_control_assert(vi->vi_rst);
>> +     clk_disable_unprepare(vi->vi_clk);
>> +     tegra_powergate_power_off(TEGRA_POWERGATE_VENC);
>> +     regulator_disable(vi->vi_reg);
>> +}
>> +
>> +static int tegra_vi_tpg_channels_alloc(struct tegra_vi *vi)
>> +{
>> +     struct tegra_channel *chan;
>> +     unsigned int port_num;
>> +     const struct tegra_video_format *video_formats;
>> +     unsigned int nformats = vi->soc_data->nformats;
>> +     unsigned int nchannels = vi->soc_data->vi_max_channels;
>> +
>> +     video_formats = devm_kcalloc(vi->dev, nformats, sizeof(*video_formats),
>> +                                  GFP_KERNEL);
>> +     if (!video_formats)
>> +             return -ENOMEM;
>> +
>> +     video_formats = vi->soc_data->video_formats;
>> +
>> +     for (port_num = 0; port_num < nchannels; port_num++) {
>> +             chan = devm_kzalloc(vi->dev, sizeof(*chan), GFP_KERNEL);
>> +             if (!chan)
>> +                     return -ENOMEM;
>> +
>> +             list_add_tail(&chan->list, &vi->vi_chans);
>> +             chan->vi = vi;
>> +             chan->port = port_num;
>> +             chan->nformats = nformats;
>> +             chan->video_formats = video_formats;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_vi_channels_init(struct tegra_vi *vi)
>> +{
>> +     struct tegra_channel *chan;
>> +     int ret;
>> +
>> +     list_for_each_entry(chan, &vi->vi_chans, list) {
>> +             ret = tegra_channel_init(chan);
>> +             if (ret < 0) {
>> +                     dev_err(vi->dev, "channel %d init failed\n",
>> +                             chan->port);
>> +                     return ret;
>> +             }
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_vi_channels_cleanup(struct tegra_vi *vi)
>> +{
>> +     struct tegra_channel *chan;
>> +
>> +     list_for_each_entry(chan, &vi->vi_chans, list)
>> +             tegra_channel_cleanup(chan);
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_vi_tpg_graph_init(struct tegra_vi *vi)
>> +{
>> +     struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>> +     struct tegra_csi_device *csi = cam->csi;
>> +     struct tegra_channel *vi_chan;
>> +     struct tegra_csi_channel *csi_chan;
>> +     u32 link_flags = MEDIA_LNK_FL_ENABLED;
>> +     int ret = 0;
>> +
>> +     csi_chan = list_first_entry(&csi->csi_chans, struct tegra_csi_channel,
>> +                                 list);
>> +
>> +     list_for_each_entry(vi_chan, &vi->vi_chans, list) {
>> +             struct media_entity *source = &csi_chan->subdev.entity;
>> +             struct media_entity *sink = &vi_chan->video.entity;
>> +             struct media_pad *source_pad = csi_chan->pads;
>> +             struct media_pad *sink_pad = &vi_chan->pad;
>> +
>> +             ret = v4l2_device_register_subdev(&cam->v4l2_dev,
>> +                                               &csi_chan->subdev);
>> +             if (ret) {
>> +                     dev_err(vi->dev, "failed to register subdev: %d\n",
>> +                             ret);
>> +                     goto register_fail;
>> +             }
>> +
>> +             dev_dbg(vi->dev, "creating %s:%u -> %s:%u link\n",
>> +                     source->name, source_pad->index,
>> +                     sink->name, sink_pad->index);
>> +
>> +             ret = media_create_pad_link(source, source_pad->index,
>> +                                         sink, sink_pad->index,
>> +                                         link_flags);
>> +             if (ret < 0) {
>> +                     dev_err(vi->dev,
>> +                             "failed to create %s:%u -> %s:%u link\n",
>> +                             source->name, source_pad->index,
>> +                             sink->name, sink_pad->index);
>> +                     goto register_fail;
>> +             }
>> +
>> +             vi_tpg_fmts_bitmap_init(vi_chan);
>> +             tegra_channel_setup_ctrl_handler(vi_chan);
>> +
>> +             csi_chan = list_next_entry(csi_chan, list);
>> +     }
>> +
>> +     return 0;
>> +
>> +register_fail:
>> +     list_for_each_entry(csi_chan, &csi->csi_chans, list)
>> +             v4l2_device_unregister_subdev(&csi_chan->subdev);
>> +
>> +     return ret;
>> +}
>> +
>> +static int tegra_vi_init(struct host1x_client *client)
>> +{
>> +     struct tegra_camera *cam = dev_get_drvdata(client->host);
>> +     struct tegra_vi *vi = host1x_client_to_vi(client);
>> +     int ret;
>> +
>> +     cam->vi = vi;
>> +
>> +     if (!cam->csi) {
>> +             dev_err(vi->dev, "csi host1x client is not initialized\n");
>> +             return -ENODEV;
>> +     }
>> +
>> +     INIT_LIST_HEAD(&vi->vi_chans);
>> +
>> +     /* Create all TPG channels */
>> +     ret = tegra_vi_tpg_channels_alloc(vi);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     /* initialize Tegra VI channels */
>> +     ret = tegra_vi_channels_init(vi);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     /* Setup media links between Tegra VI and CSI for TPG */
>> +     ret = tegra_vi_tpg_graph_init(vi);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_vi_exit(struct host1x_client *client)
>> +{
>> +     struct tegra_camera *cam = dev_get_drvdata(client->host);
>> +
>> +     if (cam->vi)
>> +             tegra_vi_channels_cleanup(cam->vi);
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct host1x_client_ops vi_client_ops = {
>> +     .init = tegra_vi_init,
>> +     .exit = tegra_vi_exit,
>> +};
>> +
>> +static int tegra_vi_probe(struct platform_device *pdev)
>> +{
>> +     struct resource *res;
>> +     struct tegra_vi *vi;
>> +     int ret;
>> +
>> +     vi = devm_kzalloc(&pdev->dev, sizeof(*vi), GFP_KERNEL);
>> +     if (!vi)
>> +             return -ENOMEM;
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     vi->iomem = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(vi->iomem))
>> +             return PTR_ERR(vi->iomem);
>> +
>> +     vi->soc_data = of_device_get_match_data(&pdev->dev);
>> +     if (!vi->soc_data) {
>> +             dev_info(&pdev->dev, "No platform data\n\n");
>> +             return -ENODATA;
>> +     }
>> +
>> +     vi->vi_rst = devm_reset_control_get(&pdev->dev, "vi");
>> +     if (IS_ERR(vi->vi_rst)) {
>> +             dev_err(&pdev->dev, "Failed to get vi reset\n");
>> +             return PTR_ERR(vi->vi_rst);
>> +     }
>> +
>> +     vi->vi_clk = devm_clk_get(&pdev->dev, "vi");
>> +     if (IS_ERR(vi->vi_clk)) {
>> +             dev_err(&pdev->dev, "Failed to get vi clock\n");
>> +             return PTR_ERR(vi->vi_clk);
>> +     }
>> +
>> +     vi->vi_reg = devm_regulator_get(&pdev->dev, "avdd-dsi-csi");
>> +     if (IS_ERR(vi->vi_reg)) {
>> +             dev_err(&pdev->dev, "Failed to get avdd-dsi-csi regulators\n");
>> +             return -EPROBE_DEFER;
>> +     }
>> +
>> +     vi->dev = &pdev->dev;
>> +     vi->fops = vi->soc_data->vi_fops;
>> +     platform_set_drvdata(pdev, vi);
>> +
>> +     /* initialize host1x interface */
>> +     INIT_LIST_HEAD(&vi->client.list);
>> +     vi->client.ops = &vi_client_ops;
>> +     vi->client.dev = &pdev->dev;
>> +
>> +     ret = host1x_client_register(&vi->client);
>> +     if (ret < 0) {
>> +             dev_err(vi->dev, "failed to register host1x client: %d\n",
>> +                     ret);
>> +             return -ENODEV;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_vi_remove(struct platform_device *pdev)
>> +{
>> +     struct tegra_vi *vi = platform_get_drvdata(pdev);
>> +
>> +     host1x_client_unregister(&vi->client);
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct vi_tegra_soc_data tegra210_vi_data = {
>> +     .video_formats = vi2_video_formats,
>> +     .nformats = ARRAY_SIZE(vi2_video_formats),
>> +     .vi_fops = &vi2_fops,
>> +     .vi_max_clk_hz = TEGRA210_CLOCK_VI_MAX,
>> +     .vi_max_channels = TEGRA210_MAX_CHANNELS,
>> +};
>> +
>> +static const struct of_device_id tegra_vi_of_id_table[] = {
>> +     { .compatible = "nvidia,tegra210-vi", .data = &tegra210_vi_data },
>> +     { }
>> +};
>> +MODULE_DEVICE_TABLE(of, tegra_vi_of_id_table);
>> +
>> +struct platform_driver tegra_vi_driver = {
>> +     .driver = {
>> +             .name = "tegra-vi",
>> +             .of_match_table = tegra_vi_of_id_table,
>> +     },
>> +     .probe = tegra_vi_probe,
>> +     .remove = tegra_vi_remove,
>> +};
>> +
>> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
>> +MODULE_DESCRIPTION("NVIDIA Tegra Video Input Device Driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/staging/media/tegra/tegra-vi.h b/drivers/staging/media/tegra/tegra-vi.h
>> new file mode 100644
>> index 000000000000..62973cb62624
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-vi.h
>> @@ -0,0 +1,101 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __TEGRA_VI_H__
>> +#define __TEGRA_VI_H__
>> +
>> +#include <linux/host1x.h>
>> +#include <linux/list.h>
>> +#include <linux/mutex.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/videodev2.h>
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +#include "mc_common.h"
>> +
>> +enum tegra_vi_pg_mode {
>> +     TEGRA_VI_PG_DISABLED = 0,
>> +     TEGRA_VI_PG_DIRECT,
>> +     TEGRA_VI_PG_PATCH,
>> +};
>> +
>> +/**
>> + * struct tegra_channel_buffer - video channel buffer
>> + * @buf: vb2 buffer base object
>> + * @queue: buffer list entry in the channel queued buffers list
>> + * @chan: channel that uses the buffer
>> + * @addr: Tegra IOVA buffer address for VI output
>> + */
>> +struct tegra_channel_buffer {
>> +     struct tegra_channel *chan;
>> +     struct vb2_v4l2_buffer buf;
>> +     struct list_head queue;
>> +     dma_addr_t addr;
>> +};
>> +
>> +#define to_tegra_channel_buffer(vb) \
>> +     container_of(vb, struct tegra_channel_buffer, buf)
>> +
>> +struct tegra_vi_fops {
>> +     void (*vi_stride_align)(unsigned int *bpl);
>> +     int (*vi_start_streaming)(struct vb2_queue *vq, u32 count);
>> +     void (*vi_stop_streaming)(struct vb2_queue *vq);
>> +};
>> +
>> +struct vi_tegra_soc_data {
>> +     const struct tegra_video_format *video_formats;
>> +     unsigned int nformats;
>> +     const struct tegra_vi_fops *vi_fops;
>> +     unsigned int vi_max_clk_hz;
>> +     unsigned int vi_max_channels;
>> +};
>> +
>> +/**
>> + * struct tegra_vi - NVIDIA Tegra Video Input device structure
>> + * @dev: device struct
>> + * @client: host1x_client struct
>> + *
>> + * @iomem: register base
>> + * @vi_clk: main clock for VI block
>> + * @vi_rst: reset controller
>> + * @vi_reg: regulator for VI hardware, normally it avdd_dsi_csi
>> + * @power_on_refcnt: reference count for power on/off operations
>> + *
>> + * @soc_data: pointer to SoC data structure
>> + * @fops: vi operations
>> + *
>> + * @channels: list of channels at the pipeline output and input
>> + *
>> + * @pg_mode: test pattern generator mode (disabled/direct/patch)
>> + */
>> +struct tegra_vi {
>> +     struct device *dev;
>> +     struct host1x_client client;
>> +
>> +     void __iomem *iomem;
>> +     struct clk *vi_clk;
>> +     struct reset_control *vi_rst;
>> +     struct regulator *vi_reg;
>> +     atomic_t power_on_refcnt;
>> +
>> +     const struct vi_tegra_soc_data *soc_data;
>> +     const struct tegra_vi_fops *fops;
>> +
>> +     struct list_head vi_chans;
>> +
>> +     enum tegra_vi_pg_mode pg_mode;
>> +};
>> +
>> +int tegra_vi_power_on(struct tegra_vi *vi);
>> +void tegra_vi_power_off(struct tegra_vi *vi);
>> +
>> +#endif /* __TEGRA_VI_H__ */
>> diff --git a/drivers/staging/media/tegra/vi2_fops.c b/drivers/staging/media/tegra/vi2_fops.c
>> new file mode 100644
>> index 000000000000..a12a662ceec6
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/vi2_fops.c
>> @@ -0,0 +1,364 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __VI2_H__
>> +#define __VI2_H__
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/freezer.h>
>> +
>> +#include "vi2_registers.h"
>> +#include "vi2_formats.h"
>> +#include "mc_common.h"
>> +#include "vi2_fops.h"
>> +#include "tegra-vi.h"
>> +
>> +static void tegra_channel_write(struct tegra_channel *chan,
>> +                             unsigned int addr, u32 val)
>> +{
>> +     writel(val, chan->vi->iomem + addr);
>> +}
>> +
>> +static u32 tegra_channel_read(struct tegra_channel *chan,
>> +                           unsigned int addr)
>> +{
>> +     return readl(chan->vi->iomem + addr);
>> +}
>> +
>> +/* VI CSI registers accessors */
>> +static void csi_write(struct tegra_channel *chan, unsigned int addr, u32 val)
>> +{
>> +     void __iomem *vi_csi_base;
>> +
>> +     vi_csi_base = chan->vi->iomem + TEGRA_VI_CSI_BASE(chan->port);
>> +     writel(val, vi_csi_base + addr);
>> +}
>> +
>> +static u32 csi_read(struct tegra_channel *chan, unsigned int addr)
>> +{
>> +     void __iomem *vi_csi_base;
>> +
>> +     vi_csi_base = chan->vi->iomem + TEGRA_VI_CSI_BASE(chan->port);
>> +
>> +     return readl(vi_csi_base + addr);
>> +}
>> +
>> +/*
>> + * Tegra channel frame setup and capture operations
>> + */
>> +static int tegra_channel_capture_setup(struct tegra_channel *chan)
>> +{
>> +     u32 height = chan->format.height;
>> +     u32 width = chan->format.width;
>> +     u32 format = chan->fmtinfo->img_fmt;
>> +     u32 data_type = chan->fmtinfo->img_dt;
>> +     u32 word_count = tegra_core_get_word_count(width, chan->fmtinfo);
>> +
>> +     csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, 0xFFFFFFFF);
>> +     csi_write(chan, TEGRA_VI_CSI_IMAGE_DEF,
>> +               ((chan->vi->pg_mode ? 0 : 1) << BYPASS_PXL_TRANSFORM_OFFSET) |
>> +               (format << IMAGE_DEF_FORMAT_OFFSET) |
>> +               IMAGE_DEF_DEST_MEM);
>> +     csi_write(chan, TEGRA_VI_CSI_IMAGE_DT, data_type);
>> +     csi_write(chan, TEGRA_VI_CSI_IMAGE_SIZE_WC, word_count);
>> +     csi_write(chan, TEGRA_VI_CSI_IMAGE_SIZE,
>> +               (height << IMAGE_SIZE_HEIGHT_OFFSET) | width);
>> +
>> +     return 0;
>> +}
>> +
>> +static void tegra_channel_capture_error_status(struct tegra_channel *chan)
>> +{
>> +     u32 val;
>> +
>> +     val = csi_read(chan, TEGRA_VI_CSI_ERROR_STATUS);
>> +     dev_err(&chan->video.dev, "TEGRA_VI_CSI_ERROR_STATUS 0x%08x\n", val);
>> +     csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, val);
>> +
>> +     val = tegra_channel_read(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR);
>> +     dev_err(&chan->video.dev, "TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR 0x%08x\n",
>> +             val);
>> +     tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR, val);
>> +     tegra_channel_csi_error_status(chan);
>> +}
>> +
>> +static int tegra_channel_capture_frame(struct tegra_channel *chan,
>> +                                    struct tegra_channel_buffer *buf)
>> +{
>> +     int err = 0;
>> +     u32 thresh, value, frame_start;
>> +     int bytes_per_line = chan->format.bytesperline;
>> +
>> +     /* program buffer address by using surface 0 */
>> +     csi_write(chan, TEGRA_VI_CSI_SURFACE0_OFFSET_MSB, 0x0);
>> +     csi_write(chan, TEGRA_VI_CSI_SURFACE0_OFFSET_LSB, buf->addr);
>> +     csi_write(chan, TEGRA_VI_CSI_SURFACE0_STRIDE, bytes_per_line);
>> +
>> +     /* increase syncpoint max */
>> +     thresh = host1x_syncpt_incr_max(chan->sp, 1);
>> +
>> +     /* program syncpoint */
>> +     frame_start = VI_CSI_PP_FRAME_START(chan->port);
>> +     value = VI_CFG_VI_INCR_SYNCPT_COND(frame_start) |
>> +             host1x_syncpt_id(chan->sp);
>> +     tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT, value);
>> +
>> +     csi_write(chan, TEGRA_VI_CSI_SINGLE_SHOT, SINGLE_SHOT_CAPTURE);
>> +
>> +     /* move buffer to capture done queue */
>> +     spin_lock(&chan->done_lock);
>> +     list_add_tail(&buf->queue, &chan->done);
>> +     spin_unlock(&chan->done_lock);
>> +
>> +     /* wait up kthread for capture done */
>> +     wake_up_interruptible(&chan->done_wait);
>> +
>> +     /* use syncpoint to wake up */
>> +     err = host1x_syncpt_wait(chan->sp, thresh,
>> +                              TEGRA_VI_SYNCPT_WAIT_TIMEOUT, &value);
>> +     if (err) {
>> +             dev_err(&chan->video.dev,
>> +                     "frame start syncpt timeout, err: %d\n", err);
>> +             tegra_channel_capture_error_status(chan);
>> +     }
>> +
>> +     return err;
>> +}
>> +
>> +static int tegra_channel_capture_done(struct tegra_channel *chan,
>> +                                   struct tegra_channel_buffer *buf)
>> +{
>> +     struct vb2_v4l2_buffer *vb = &buf->buf;
>> +     u32 thresh, value, mw_ack_done;
>> +     int ret = 0;
>> +
>> +     /* increase syncpoint max */
>> +     thresh = host1x_syncpt_incr_max(chan->sp, 1);
>> +
>> +     /* program syncpoint */
>> +     mw_ack_done = VI_CSI_MW_ACK_DONE(chan->port);
>> +     value = VI_CFG_VI_INCR_SYNCPT_COND(mw_ack_done) |
>> +             host1x_syncpt_id(chan->sp);
>> +     tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT, value);
>> +
>> +     if (!csi_read(chan, TEGRA_VI_CSI_SINGLE_SHOT))
>> +             csi_write(chan, TEGRA_VI_CSI_SINGLE_SHOT, SINGLE_SHOT_CAPTURE);
>> +
>> +     /* use syncpoint to wake up */
>> +     ret = host1x_syncpt_wait(chan->sp, thresh,
>> +                              TEGRA_VI_SYNCPT_WAIT_TIMEOUT, &value);
>> +     if (ret)
>> +             dev_err(&chan->video.dev,
>> +                     "MW_ACK_DONE syncpoint timeout, err: %d\n", ret);
>> +
>> +     /* captured one frame */
>> +     vb->sequence = chan->sequence++;
>> +     vb->field = V4L2_FIELD_NONE;
>> +     vb->vb2_buf.timestamp = ktime_get_ns();
>> +     vb2_buffer_done(&vb->vb2_buf,
>> +                     ret < 0 ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
>> +
>> +     return ret;
>> +}
>> +
>> +static int chan_capture_kthread_start(void *data)
>> +{
>> +     struct tegra_channel *chan = data;
>> +     struct tegra_channel_buffer *buf;
>> +
>> +     set_freezable();
>> +
>> +     while (1) {
>> +             try_to_freeze();
>> +
>> +             wait_event_interruptible(chan->start_wait,
>> +                                      !list_empty(&chan->capture) ||
>> +                                      kthread_should_stop());
>> +             if (kthread_should_stop())
>> +                     break;
>> +
>> +             spin_lock(&chan->start_lock);
>> +             if (list_empty(&chan->capture)) {
>> +                     spin_unlock(&chan->start_lock);
>> +                     continue;
>> +             }
>> +
>> +             buf = list_entry(chan->capture.next,
>> +                              struct tegra_channel_buffer, queue);
>> +             list_del_init(&buf->queue);
>> +             spin_unlock(&chan->start_lock);
>> +             tegra_channel_capture_frame(chan, buf);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int chan_capture_kthread_done(void *data)
>> +{
>> +     struct tegra_channel *chan = data;
>> +     struct tegra_channel_buffer *buf;
>> +
>> +     set_freezable();
>> +
>> +     while (1) {
>> +             try_to_freeze();
>> +
>> +             wait_event_interruptible(chan->done_wait,
>> +                                      !list_empty(&chan->done) ||
>> +                                      kthread_should_stop());
>> +
>> +             if (kthread_should_stop())
>> +                     break;
>> +
>> +             spin_lock(&chan->done_lock);
>> +             if (list_empty(&chan->done)) {
>> +                     spin_unlock(&chan->done_lock);
>> +                     continue;
>> +             }
>> +
>> +             buf = list_entry(chan->done.next, struct tegra_channel_buffer,
>> +                              queue);
>> +             list_del_init(&buf->queue);
>> +             spin_unlock(&chan->done_lock);
>> +             tegra_channel_capture_done(chan, buf);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static void vi2_stride_align(unsigned int *bpl)
>> +{
>> +     *bpl = ((*bpl + (TEGRA210_SURFACE_ALIGNMENT) - 1) &
>> +                     ~((TEGRA210_SURFACE_ALIGNMENT) - 1));
>> +}
>> +
>> +static int vi2_channel_start_streaming(struct vb2_queue *vq, u32 count)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vq);
>> +     struct media_pipeline *pipe = &chan->video.pipe;
>> +     int ret = 0;
>> +
>> +     /* turn on the power on first open */
>> +     if (atomic_add_return(1, &chan->vi->power_on_refcnt) == 1) {
>> +             ret = tegra_vi_power_on(chan->vi);
>> +             if (ret < 0)
>> +                     goto error_vi_power_on;
>> +
>> +             usleep_range(5, 100);
>> +             tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL,
>> +                                 VI_CG_2ND_LEVEL_EN);
>> +             usleep_range(10, 15);
>> +     }
>> +
>> +     /* clean up status */
>> +     csi_write(chan, TEGRA_VI_CSI_ERROR_STATUS, 0xFFFFFFFF);
>> +
>> +     /*
>> +      * Sync point FIFO full stalls the host interface.
>> +      * Setting NO_STALL will drop INCR_SYNCPT methods when fifos are
>> +      * full and corresponding condition bits in INCR_SYNCPT_ERROR
>> +      * register will be set.
>> +      * This allows SW to process error recovery.
>> +      */
>> +     tegra_channel_write(chan, TEGRA_VI_CFG_VI_INCR_SYNCPT_CNTRL,
>> +                         TEGRA_VI_CFG_VI_INCR_SYNCPT_NO_STALL);
>> +
>> +     ret = media_pipeline_start(&chan->video.entity, pipe);
>> +     if (ret < 0)
>> +             goto error_pipeline_start;
>> +
>> +     /* start the pipeline */
>> +     ret = tegra_channel_set_stream(chan, true);
>> +     if (ret < 0)
>> +             goto error_set_stream;
>> +
>> +     /* program VI registers after TPG, sensors and CSI streaming */
>> +     ret = tegra_channel_capture_setup(chan);
>> +     if (ret < 0)
>> +             goto error_capture_setup;
>> +
>> +     chan->sequence = 0;
>> +
>> +     /* start kthread to capture data to buffer */
>> +     chan->kthread_capture_start = kthread_run(chan_capture_kthread_start,
>> +                                               chan, "%s:0",
>> +                                               chan->video.name);
>> +     if (IS_ERR(chan->kthread_capture_start)) {
>> +             dev_err(&chan->video.dev,
>> +                     "failed to run kthread for capture start!\n");
>> +             ret = PTR_ERR(chan->kthread_capture_start);
>> +             goto error_capture_setup;
>> +     }
>> +
>> +     chan->kthread_capture_done = kthread_run(chan_capture_kthread_done,
>> +                                              chan, "%s:1",
>> +                                              chan->video.name);
>> +     if (IS_ERR(chan->kthread_capture_done)) {
>> +             dev_err(&chan->video.dev,
>> +                     "failed to run kthread for capture done!\n");
>> +             ret = PTR_ERR(chan->kthread_capture_done);
>> +             goto error_capture_setup;
>> +     }
>> +
>> +     return 0;
>> +
>> +error_capture_setup:
>> +     tegra_channel_set_stream(chan, false);
>> +
>> +error_set_stream:
>> +     media_pipeline_stop(&chan->video.entity);
>> +
>> +error_pipeline_start:
>> +     tegra_channel_queued_buf_done(chan, VB2_BUF_STATE_QUEUED);
>> +
>> +error_vi_power_on:
>> +     if (atomic_dec_and_test(&chan->vi->power_on_refcnt))
>> +             tegra_vi_power_off(chan->vi);
>> +
>> +     return ret;
>> +}
>> +
>> +static void vi2_channel_stop_streaming(struct vb2_queue *vq)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vq);
>> +
>> +     /* stop the kthread for capture */
>> +     kthread_stop(chan->kthread_capture_start);
>> +     chan->kthread_capture_start = NULL;
>> +     kthread_stop(chan->kthread_capture_done);
>> +     chan->kthread_capture_done = NULL;
>> +
>> +     /* disable clock gating to enable continuous clock */
>> +     tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL, 0);
>> +
>> +     /* clear single shot if armed at close */
>> +     if (csi_read(chan, TEGRA_VI_CSI_SINGLE_SHOT)) {
>> +             csi_write(chan, TEGRA_VI_CSI_SW_RESET, 0xF);
>> +             csi_write(chan, TEGRA_VI_CSI_SW_RESET, 0x0);
>> +     }
>> +
>> +     /* enable clock gating so VI can be clock gated if necessary */
>> +     tegra_channel_write(chan, TEGRA_VI_CFG_CG_CTRL, VI_CG_2ND_LEVEL_EN);
>> +
>> +     tegra_channel_set_stream(chan, false);
>> +
>> +     media_pipeline_stop(&chan->video.entity);
>> +
>> +     /* turn off power on the last release */
>> +     if (atomic_dec_and_test(&chan->vi->power_on_refcnt))
>> +             tegra_vi_power_off(chan->vi);
>> +
>> +     tegra_channel_queued_buf_done(chan, VB2_BUF_STATE_ERROR);
>> +}
>> +
>> +const struct tegra_vi_fops vi2_fops = {
>> +     .vi_stride_align = vi2_stride_align,
>> +     .vi_start_streaming = vi2_channel_start_streaming,
>> +     .vi_stop_streaming = vi2_channel_stop_streaming,
>> +};
>> +EXPORT_SYMBOL(vi2_fops);
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/vi2_fops.h b/drivers/staging/media/tegra/vi2_fops.h
>> new file mode 100644
>> index 000000000000..dcbd3ad4b642
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/vi2_fops.h
>> @@ -0,0 +1,15 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __T210_VI_H__
>> +#define __T210_VI_H__
>> +
>> +#define      TEGRA210_CLOCK_VI_MAX                   460000000
>> +
>> +#define      TEGRA_VI_CSI_BASE(x)                    (0x100 + (x) * 0x100)
>> +
>> +extern const struct tegra_vi_fops vi2_fops;
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/vi2_formats.h b/drivers/staging/media/tegra/vi2_formats.h
>> new file mode 100644
>> index 000000000000..416960b1c1f2
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/vi2_formats.h
>> @@ -0,0 +1,119 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __VI2_FORMATS_H_
>> +#define __VI2_FORMATS_H_
>> +
>> +#include "tegra-core.h"
>> +
>> +/*
>> + * These go into the TEGRA_VI_CSI_n_IMAGE_DEF registers bits 23:16
>> + * Output pixel memory format for the VI channel.
>> + */
>> +enum tegra_image_format {
>> +     TEGRA_IMAGE_FORMAT_T_L8 = 16,
>> +
>> +     TEGRA_IMAGE_FORMAT_T_R16_I = 32,
>> +     TEGRA_IMAGE_FORMAT_T_B5G6R5,
>> +     TEGRA_IMAGE_FORMAT_T_R5G6B5,
>> +     TEGRA_IMAGE_FORMAT_T_A1B5G5R5,
>> +     TEGRA_IMAGE_FORMAT_T_A1R5G5B5,
>> +     TEGRA_IMAGE_FORMAT_T_B5G5R5A1,
>> +     TEGRA_IMAGE_FORMAT_T_R5G5B5A1,
>> +     TEGRA_IMAGE_FORMAT_T_A4B4G4R4,
>> +     TEGRA_IMAGE_FORMAT_T_A4R4G4B4,
>> +     TEGRA_IMAGE_FORMAT_T_B4G4R4A4,
>> +     TEGRA_IMAGE_FORMAT_T_R4G4B4A4,
>> +
>> +     TEGRA_IMAGE_FORMAT_T_A8B8G8R8 = 64,
>> +     TEGRA_IMAGE_FORMAT_T_A8R8G8B8,
>> +     TEGRA_IMAGE_FORMAT_T_B8G8R8A8,
>> +     TEGRA_IMAGE_FORMAT_T_R8G8B8A8,
>> +     TEGRA_IMAGE_FORMAT_T_A2B10G10R10,
>> +     TEGRA_IMAGE_FORMAT_T_A2R10G10B10,
>> +     TEGRA_IMAGE_FORMAT_T_B10G10R10A2,
>> +     TEGRA_IMAGE_FORMAT_T_R10G10B10A2,
>> +
>> +     TEGRA_IMAGE_FORMAT_T_A8Y8U8V8 = 193,
>> +     TEGRA_IMAGE_FORMAT_T_V8U8Y8A8,
>> +
>> +     TEGRA_IMAGE_FORMAT_T_A2Y10U10V10 = 197,
>> +     TEGRA_IMAGE_FORMAT_T_V10U10Y10A2,
>> +     TEGRA_IMAGE_FORMAT_T_Y8_U8__Y8_V8,
>> +     TEGRA_IMAGE_FORMAT_T_Y8_V8__Y8_U8,
>> +     TEGRA_IMAGE_FORMAT_T_U8_Y8__V8_Y8,
>> +     TEGRA_IMAGE_FORMAT_T_V8_Y8__U8_Y8,
>> +
>> +     TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N444 = 224,
>> +     TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N444,
>> +     TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N444,
>> +     TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N422,
>> +     TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N422,
>> +     TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N422,
>> +     TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N420,
>> +     TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N420,
>> +     TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N420,
>> +     TEGRA_IMAGE_FORMAT_T_X2LC10LB10LA10,
>> +     TEGRA_IMAGE_FORMAT_T_A2R6R6R6R6R6,
>> +};
>> +
>> +static const struct tegra_video_format vi2_video_formats[] = {
>> +     /* RAW 8 */
>> +     TEGRA_VIDEO_FORMAT(RAW8, 8, SRGGB8_1X8, 1, 1, T_L8,
>> +                        RAW8, SRGGB8, "RGRG.. GBGB.."),
>> +     TEGRA_VIDEO_FORMAT(RAW8, 8, SGRBG8_1X8, 1, 1, T_L8,
>> +                        RAW8, SGRBG8, "GRGR.. BGBG.."),
>> +     TEGRA_VIDEO_FORMAT(RAW8, 8, SGBRG8_1X8, 1, 1, T_L8,
>> +                        RAW8, SGBRG8, "GBGB.. RGRG.."),
>> +     TEGRA_VIDEO_FORMAT(RAW8, 8, SBGGR8_1X8, 1, 1, T_L8,
>> +                        RAW8, SBGGR8, "BGBG.. GRGR.."),
>> +
>> +     /* RAW 10 */
>> +     TEGRA_VIDEO_FORMAT(RAW10, 10, SRGGB10_1X10, 2, 1, T_R16_I,
>> +                        RAW10, SRGGB10, "RGRG.. GBGB.."),
>> +     TEGRA_VIDEO_FORMAT(RAW10, 10, SGRBG10_1X10, 2, 1, T_R16_I,
>> +                        RAW10, SGRBG10, "GRGR.. BGBG.."),
>> +     TEGRA_VIDEO_FORMAT(RAW10, 10, SGBRG10_1X10, 2, 1, T_R16_I,
>> +                        RAW10, SGBRG10, "GBGB.. RGRG.."),
>> +     TEGRA_VIDEO_FORMAT(RAW10, 10, SBGGR10_1X10, 2, 1, T_R16_I,
>> +                        RAW10, SBGGR10, "BGBG.. GRGR.."),
>> +
>> +     /* RAW 12 */
>> +     TEGRA_VIDEO_FORMAT(RAW12, 12, SRGGB12_1X12, 2, 1, T_R16_I,
>> +                        RAW12, SRGGB12, "RGRG.. GBGB.."),
>> +     TEGRA_VIDEO_FORMAT(RAW12, 12, SGRBG12_1X12, 2, 1, T_R16_I,
>> +                        RAW12, SGRBG12, "GRGR.. BGBG.."),
>> +     TEGRA_VIDEO_FORMAT(RAW12, 12, SGBRG12_1X12, 2, 1, T_R16_I,
>> +                        RAW12, SGBRG12, "GBGB.. RGRG.."),
>> +     TEGRA_VIDEO_FORMAT(RAW12, 12, SBGGR12_1X12, 2, 1, T_R16_I,
>> +                        RAW12, SBGGR12, "BGBG.. GRGR.."),
>> +
>> +     /* RGB888 */
>> +     TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X24, 4, 1, T_A8R8G8B8,
>> +                        RGB888, ABGR32, "BGRA-8-8-8-8"),
>> +     TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X32_PADHI, 4, 1, T_A8B8G8R8,
>> +                        RGB888, RGB32, "RGB-8-8-8-8"),
>> +
>> +     /* YUV422 */
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 2, 1, T_U8_Y8__V8_Y8,
>> +                        YUV422_8, UYVY, "YUV 4:2:2"),
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_1X16, 2, 1, T_V8_Y8__U8_Y8,
>> +                        YUV422_8, VYUY, "YUV 4:2:2"),
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_1X16, 2, 1, T_Y8_U8__Y8_V8,
>> +                        YUV422_8, YUYV, "YUV 4:2:2"),
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_1X16, 2, 1, T_Y8_V8__Y8_U8,
>> +                        YUV422_8, YVYU, "YUV 4:2:2"),
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 1, 1, T_Y8__V8U8_N422,
>> +                        YUV422_8, NV16, "NV16"),
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_2X8, 2, 1, T_U8_Y8__V8_Y8,
>> +                        YUV422_8, UYVY, "YUV 4:2:2 UYVY"),
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_2X8, 2, 1, T_V8_Y8__U8_Y8,
>> +                        YUV422_8, VYUY, "YUV 4:2:2 VYUY"),
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_2X8, 2, 1, T_Y8_U8__Y8_V8,
>> +                        YUV422_8, YUYV, "YUV 4:2:2 YUYV"),
>> +     TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_2X8, 2, 1, T_Y8_V8__Y8_U8,
>> +                        YUV422_8, YVYU, "YUV 4:2:2 YVYU"),
>> +};
>> +#endif
>> diff --git a/drivers/staging/media/tegra/vi2_registers.h b/drivers/staging/media/tegra/vi2_registers.h
>> new file mode 100644
>> index 000000000000..c54a6a3aa1c4
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/vi2_registers.h
>> @@ -0,0 +1,194 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __REGISTERS_H__
>> +#define __REGISTERS_H__
>> +
>> +#define      TEGRA_CLOCK_VI_MAX                              793600000
>> +#define      TEGRA210_SURFACE_ALIGNMENT                      64
>> +#define TEGRA210_MAX_CHANNELS                                6
>> +
>> +/* Tegra210 VI registers */
>> +#define      TEGRA_VI_SYNCPT_WAIT_TIMEOUT                    200
>> +#define      TEGRA_VI_CFG_VI_INCR_SYNCPT                     0x000
>> +#define   VI_CFG_VI_INCR_SYNCPT_COND(x)                      (((x) & 0xff) << 8)
>> +#define        VI_CSI_PP_LINE_START(port)                    (4 + (port) * 4)
>> +#define        VI_CSI_PP_FRAME_START(port)                   (5 + (port) * 4)
>> +#define        VI_CSI_MW_REQ_DONE(port)                      (6 + (port) * 4)
>> +#define        VI_CSI_MW_ACK_DONE(port)                      (7 + (port) * 4)
>> +
>> +#define      TEGRA_VI_CFG_VI_INCR_SYNCPT_CNTRL               0x004
>> +#define        TEGRA_VI_CFG_VI_INCR_SYNCPT_NO_STALL          BIT(8)
>> +#define      TEGRA_VI_CFG_VI_INCR_SYNCPT_ERROR               0x008
>> +#define      TEGRA_VI_CFG_CTXSW                              0x020
>> +#define      TEGRA_VI_CFG_INTSTATUS                          0x024
>> +#define      TEGRA_VI_CFG_PWM_CONTROL                        0x038
>> +#define      TEGRA_VI_CFG_PWM_HIGH_PULSE                     0x03c
>> +#define      TEGRA_VI_CFG_PWM_LOW_PULSE                      0x040
>> +#define      TEGRA_VI_CFG_PWM_SELECT_PULSE_A                 0x044
>> +#define      TEGRA_VI_CFG_PWM_SELECT_PULSE_B                 0x048
>> +#define      TEGRA_VI_CFG_PWM_SELECT_PULSE_C                 0x04c
>> +#define      TEGRA_VI_CFG_PWM_SELECT_PULSE_D                 0x050
>> +#define      TEGRA_VI_CFG_VGP1                               0x064
>> +#define      TEGRA_VI_CFG_VGP2                               0x068
>> +#define      TEGRA_VI_CFG_VGP3                               0x06c
>> +#define      TEGRA_VI_CFG_VGP4                               0x070
>> +#define      TEGRA_VI_CFG_VGP5                               0x074
>> +#define      TEGRA_VI_CFG_VGP6                               0x078
>> +#define      TEGRA_VI_CFG_INTERRUPT_MASK                     0x08c
>> +#define      TEGRA_VI_CFG_INTERRUPT_TYPE_SELECT              0x090
>> +#define      TEGRA_VI_CFG_INTERRUPT_POLARITY_SELECT          0x094
>> +#define      TEGRA_VI_CFG_INTERRUPT_STATUS                   0x098
>> +#define      TEGRA_VI_CFG_VGP_SYNCPT_CONFIG                  0x0ac
>> +#define      TEGRA_VI_CFG_VI_SW_RESET                        0x0b4
>> +#define      TEGRA_VI_CFG_CG_CTRL                            0x0b8
>> +#define   VI_CG_2ND_LEVEL_EN                         0x1
>> +#define      TEGRA_VI_CFG_VI_MCCIF_FIFOCTRL                  0x0e4
>> +#define      TEGRA_VI_CFG_TIMEOUT_WCOAL_VI                   0x0e8
>> +#define      TEGRA_VI_CFG_DVFS                               0x0f0
>> +#define      TEGRA_VI_CFG_RESERVE                            0x0f4
>> +#define      TEGRA_VI_CFG_RESERVE_1                          0x0f8
>> +
>> +/* Tegra210 CSI registers */
>> +#define TEGRA_VI_CSI_SW_RESET                                0x000
>> +#define TEGRA_VI_CSI_SINGLE_SHOT                     0x004
>> +#define   SINGLE_SHOT_CAPTURE                                0x1
>> +#define TEGRA_VI_CSI_SINGLE_SHOT_STATE_UPDATE                0x008
>> +#define TEGRA_VI_CSI_IMAGE_DEF                               0x00c
>> +#define   BYPASS_PXL_TRANSFORM_OFFSET                        24
>> +#define   IMAGE_DEF_FORMAT_OFFSET                    16
>> +#define   IMAGE_DEF_DEST_MEM                         0x1
>> +#define TEGRA_VI_CSI_RGB2Y_CTRL                              0x010
>> +#define TEGRA_VI_CSI_MEM_TILING                              0x014
>> +#define TEGRA_VI_CSI_IMAGE_SIZE                              0x018
>> +#define   IMAGE_SIZE_HEIGHT_OFFSET                   16
>> +#define TEGRA_VI_CSI_IMAGE_SIZE_WC                   0x01c
>> +#define TEGRA_VI_CSI_IMAGE_DT                                0x020
>> +#define TEGRA_VI_CSI_SURFACE0_OFFSET_MSB             0x024
>> +#define TEGRA_VI_CSI_SURFACE0_OFFSET_LSB             0x028
>> +#define TEGRA_VI_CSI_SURFACE1_OFFSET_MSB             0x02c
>> +#define TEGRA_VI_CSI_SURFACE1_OFFSET_LSB             0x030
>> +#define TEGRA_VI_CSI_SURFACE2_OFFSET_MSB             0x034
>> +#define TEGRA_VI_CSI_SURFACE2_OFFSET_LSB             0x038
>> +#define TEGRA_VI_CSI_SURFACE0_BF_OFFSET_MSB          0x03c
>> +#define TEGRA_VI_CSI_SURFACE0_BF_OFFSET_LSB          0x040
>> +#define TEGRA_VI_CSI_SURFACE1_BF_OFFSET_MSB          0x044
>> +#define TEGRA_VI_CSI_SURFACE1_BF_OFFSET_LSB          0x048
>> +#define TEGRA_VI_CSI_SURFACE2_BF_OFFSET_MSB          0x04c
>> +#define TEGRA_VI_CSI_SURFACE2_BF_OFFSET_LSB          0x050
>> +#define TEGRA_VI_CSI_SURFACE0_STRIDE                 0x054
>> +#define TEGRA_VI_CSI_SURFACE1_STRIDE                 0x058
>> +#define TEGRA_VI_CSI_SURFACE2_STRIDE                 0x05c
>> +#define TEGRA_VI_CSI_SURFACE_HEIGHT0                 0x060
>> +#define TEGRA_VI_CSI_ISPINTF_CONFIG                  0x064
>> +#define TEGRA_VI_CSI_ERROR_STATUS                    0x084
>> +#define TEGRA_VI_CSI_ERROR_INT_MASK                  0x088
>> +#define TEGRA_VI_CSI_WD_CTRL                         0x08c
>> +#define TEGRA_VI_CSI_WD_PERIOD                               0x090
>> +
>> +/* Tegra210 CSI Pixel Parser registers: Starts from 0x838, offset 0x0 */
>> +#define TEGRA_CSI_INPUT_STREAM_CONTROL                  0x000
>> +#define   CSI_SKIP_PACKET_THRESHOLD_OFFSET           16
>> +
>> +#define TEGRA_CSI_PIXEL_STREAM_CONTROL0                      0x004
>> +#define   CSI_PP_PACKET_HEADER_SENT                  (0x1 << 4)
> Maybe use the BIT() macro ?
>
> Regards,
> Helen
>
>> +#define   CSI_PP_DATA_IDENTIFIER_ENABLE                      (0x1 << 5)
>> +#define   CSI_PP_WORD_COUNT_SELECT_HEADER            (0x1 << 6)
>> +#define   CSI_PP_CRC_CHECK_ENABLE                    (0x1 << 7)
>> +#define   CSI_PP_WC_CHECK                            (0x1 << 8)
>> +#define   CSI_PP_OUTPUT_FORMAT_STORE                 (0x3 << 16)
>> +#define   CSI_PP_HEADER_EC_DISABLE                   (0x1 << 27)
>> +#define   CSI_PPA_PAD_FRAME_NOPAD                    (0x2 << 28)
>> +
>> +#define TEGRA_CSI_PIXEL_STREAM_CONTROL1                 0x008
>> +#define   CSI_PP_TOP_FIELD_FRAME_OFFSET                      0
>> +#define   CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET         4
>> +
>> +#define TEGRA_CSI_PIXEL_STREAM_GAP                      0x00c
>> +#define   PP_FRAME_MIN_GAP_OFFSET                    16
>> +
>> +#define TEGRA_CSI_PIXEL_STREAM_PP_COMMAND               0x010
>> +#define   CSI_PP_ENABLE                                      0x1
>> +#define   CSI_PP_DISABLE                             0x2
>> +#define   CSI_PP_RST                                 0x3
>> +#define   CSI_PP_SINGLE_SHOT_ENABLE                  (0x1 << 2)
>> +#define   CSI_PP_START_MARKER_FRAME_MAX_OFFSET               12
>> +
>> +#define TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME           0x014
>> +#define TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK           0x018
>> +#define TEGRA_CSI_PIXEL_PARSER_STATUS                   0x01c
>> +#define TEGRA_CSI_CSI_SW_SENSOR_RESET                   0x020
>> +
>> +/* Tegra210 CSI PHY registers */
>> +/* CSI_PHY_CIL_COMMAND_0 offset 0x0d0 from TEGRA_CSI_PIXEL_PARSER_0_BASE */
>> +#define TEGRA_CSI_PHY_CIL_COMMAND                       0x0d0
>> +#define   CSI_A_PHY_CIL_NOP                          0x0
>> +#define   CSI_A_PHY_CIL_ENABLE                               0x1
>> +#define   CSI_A_PHY_CIL_DISABLE                              0x2
>> +#define   CSI_A_PHY_CIL_ENABLE_MASK                  0x3
>> +#define   CSI_B_PHY_CIL_NOP                          (0x0 << 8)
>> +#define   CSI_B_PHY_CIL_ENABLE                               (0x1 << 8)
>> +#define   CSI_B_PHY_CIL_DISABLE                              (0x2 << 8)
>> +#define   CSI_B_PHY_CIL_ENABLE_MASK                  (0x3 << 8)
>> +
>> +#define TEGRA_CSI_CIL_PAD_CONFIG0                       0x000
>> +#define   BRICK_CLOCK_A_4X                           (0x1 << 16)
>> +#define   BRICK_CLOCK_B_4X                           (0x2 << 16)
>> +#define TEGRA_CSI_CIL_PAD_CONFIG1                       0x004
>> +#define TEGRA_CSI_CIL_PHY_CONTROL                       0x008
>> +#define TEGRA_CSI_CIL_INTERRUPT_MASK                    0x00c
>> +#define TEGRA_CSI_CIL_STATUS                            0x010
>> +#define TEGRA_CSI_CILX_STATUS                           0x014
>> +#define TEGRA_CSI_CIL_ESCAPE_MODE_COMMAND               0x018
>> +#define TEGRA_CSI_CIL_ESCAPE_MODE_DATA                  0x01c
>> +#define TEGRA_CSI_CIL_SW_SENSOR_RESET                   0x020
>> +
>> +#define TEGRA_CSI_PATTERN_GENERATOR_CTRL             0x000
>> +#define   PG_MODE_OFFSET                             2
>> +#define   PG_ENABLE                                  0x1
>> +#define   PG_DISABLE                                 0x0
>> +
>> +#define PG_VBLANK_OFFSET                             16
>> +#define TEGRA_CSI_PG_BLANK                           0x004
>> +#define TEGRA_CSI_PG_PHASE                           0x008
>> +#define TEGRA_CSI_PG_RED_FREQ                                0x00c
>> +#define   PG_RED_VERT_INIT_FREQ_OFFSET                       16
>> +#define   PG_RED_HOR_INIT_FREQ_OFFSET                        0
>> +
>> +#define TEGRA_CSI_PG_RED_FREQ_RATE                   0x010
>> +#define TEGRA_CSI_PG_GREEN_FREQ                              0x014
>> +#define   PG_GREEN_VERT_INIT_FREQ_OFFSET             16
>> +#define   PG_GREEN_HOR_INIT_FREQ_OFFSET                      0
>> +
>> +#define TEGRA_CSI_PG_GREEN_FREQ_RATE                 0x018
>> +#define TEGRA_CSI_PG_BLUE_FREQ                               0x01c
>> +#define   PG_BLUE_VERT_INIT_FREQ_OFFSET                      16
>> +#define   PG_BLUE_HOR_INIT_FREQ_OFFSET                       0
>> +
>> +#define TEGRA_CSI_PG_BLUE_FREQ_RATE                  0x020
>> +#define TEGRA_CSI_PG_AOHDR                           0x024
>> +
>> +#define TEGRA_CSI_DPCM_CTRL_A                                0xa2c
>> +#define TEGRA_CSI_DPCM_CTRL_B                                0xa30
>> +
>> +/* Other CSI registers: Starts from 0xa44, offset 0x20c */
>> +#define TEGRA_CSI_STALL_COUNTER                              0x20c
>> +#define TEGRA_CSI_CSI_READONLY_STATUS                        0x210
>> +#define TEGRA_CSI_CSI_SW_STATUS_RESET                        0x214
>> +#define TEGRA_CSI_CLKEN_OVERRIDE                     0x218
>> +#define TEGRA_CSI_DEBUG_CONTROL                              0x21c
>> +#define TEGRA_CSI_DEBUG_COUNTER_0                    0x220
>> +#define TEGRA_CSI_DEBUG_COUNTER_1                    0x224
>> +#define TEGRA_CSI_DEBUG_COUNTER_2                    0x228
>> +
>> +/* Tegra210 CSI Pixel Parser registers */
>> +#define TEGRA_CSI_PIXEL_PARSER_0_BASE                        0x0838
>> +#define TEGRA_CSI_PIXEL_PARSER_1_BASE                        0x086c
>> +#define TEGRA_CSI_PIXEL_PARSER_2_BASE                        0x1038
>> +#define TEGRA_CSI_PIXEL_PARSER_3_BASE                        0x106c
>> +#define TEGRA_CSI_PIXEL_PARSER_4_BASE                        0x1838
>> +#define TEGRA_CSI_PIXEL_PARSER_5_BASE                        0x186c
>> +
>> +#endif
>>

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 22:13     ` Sowjanya Komatineni
@ 2020-01-29  0:49       ` Sowjanya Komatineni
  2020-01-29  1:05         ` Helen Koike
  2020-01-29 10:09       ` Thierry Reding
  1 sibling, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29  0:49 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>
> On 1/28/20 1:45 PM, Helen Koike wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> Hi Sowjanya,
>>
>> I just took a really quick look, I didn't check the driver in deep, 
>> so just some small comments below.
>>
>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>> which can support up to 6 MIPI CSI camera sensors.
>>>
>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>> capture from an external camera sensor connected to CSI or from
>>> built-in test pattern generator.
>>>
>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>
>>> This patch adds a V4L2 media controller and capture driver support
>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>
>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>> Could you send us the output of media-ctl --print-dot ? So we can 
>> view the media topology easily?
> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
> digraph board {
>         rankdir=TB
>         n00000001 [label="54080000.vi-output-0\n/dev/video0", 
> shape=box, style=filled, fillcolor=yellow]
>         n00000005 [label="54080000.vi-output-1\n/dev/video1", 
> shape=box, style=filled, fillcolor=yellow]
>         n00000009 [label="54080000.vi-output-2\n/dev/video2", 
> shape=box, style=filled, fillcolor=yellow]
>         n0000000d [label="54080000.vi-output-3\n/dev/video3", 
> shape=box, style=filled, fillcolor=yellow]
>         n00000011 [label="54080000.vi-output-4\n/dev/video4", 
> shape=box, style=filled, fillcolor=yellow]
>         n00000015 [label="54080000.vi-output-5\n/dev/video5", 
> shape=box, style=filled, fillcolor=yellow]
>         n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, 
> style=filled, fillcolor=green]
>         n00000019:port0 -> n00000001
>         n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, 
> style=filled, fillcolor=green]
>         n0000001d:port0 -> n00000005
>         n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, 
> style=filled, fillcolor=green]
>         n00000021:port0 -> n00000009
>         n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, 
> style=filled, fillcolor=green]
>         n00000025:port0 -> n0000000d
>         n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, 
> style=filled, fillcolor=green]
>         n00000029:port0 -> n00000011
>         n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, 
> style=filled, fillcolor=green]
>         n0000002d:port0 -> n00000015
> }
>
>>
>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h 
>>> b/drivers/staging/media/tegra/host1x-video.h
>>> new file mode 100644
>>> index 000000000000..84d28e6f4362
>>> --- /dev/null
>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>> @@ -0,0 +1,33 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>> + */
>>> +
>>> +#ifndef HOST1X_VIDEO_H
>>> +#define HOST1X_VIDEO_H 1
>>> +
>>> +#include <linux/host1x.h>
>>> +
>>> +#include <media/media-device.h>
>>> +#include <media/media-entity.h>
>>> +#include <media/v4l2-async.h>
>>> +#include <media/v4l2-ctrls.h>
>>> +#include <media/v4l2-device.h>
>>> +#include <media/v4l2-dev.h>
>>> +#include <media/videobuf2-v4l2.h>
>>> +
>>> +#include "tegra-vi.h"
>>> +#include "csi.h"
>>> +
>>> +struct tegra_camera {
>>> +     struct v4l2_device v4l2_dev;
>>> +     struct media_device media_dev;
>>> +     struct device *dev;
>> You can use cam->media_dev.dev instead of having this pointer.
>>
Will fix in v2
>>> +     struct tegra_vi *vi;
>>> +     struct tegra_csi_device *csi;
>>> +};
>>> +
>>> +
>>> +#define to_tegra_channel(vdev) \
>>> +     container_of(vdev, struct tegra_channel, video)
>> Why not inline instead of define. Inlines has the advantage of 
>> checking types.
Will change in v2
>>
>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>> +                                   struct v4l2_pix_format *pix,
>>> +                                   const struct tegra_video_format 
>>> **vfmt)
>>> +{
>>> +     const struct tegra_video_format *fmt_info;
>>> +     struct v4l2_subdev *subdev;
>>> +     struct v4l2_subdev_format fmt;
>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>> +
>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>> +     if (!pad_cfg)
>>> +             return -ENOMEM;
>>> +
>>> +     /*
>>> +      * Retrieve format information and select the default format 
>>> if the
>>> +      * requested format isn't supported.
>>> +      */
>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, 
>>> pix->pixelformat);
>>> +     if (!fmt_info) {
>>> +             pix->pixelformat = chan->format.pixelformat;
>>> +             pix->colorspace = chan->format.colorspace;
>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>> + pix->pixelformat);
>>> +     }
>>> +
>>> +     /* Change this when start adding interlace format support */
>>> +     pix->field = V4L2_FIELD_NONE;
>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>> +     fmt.pad = 0;
>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>> As fas as I understand, entities formats should be independent, it is 
>> up to link_validate
>> to check formats between entities.
>> The capture shouldn't change the format of the subdevice.
>>
Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source 
and VI is sink.

link validation happens only for sink ends of the link.

So with CSI subdev set_fmt sets width/height to default incase if 
width/height is not from one of the supported sizes.

>>
>>> +
>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, 
>>> &pix->height,
>>> +                             &pix->bytesperline);
>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>> +
>>> +     if (vfmt)
>>> +             *vfmt = fmt_info;
>>> +
>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>> +                                 struct v4l2_format *format)
>>> +{
>>> +     struct v4l2_fh *vfh = file->private_data;
>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>> +
>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>> +}
>>> +
>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>> +                                 struct v4l2_format *format)
>>> +{
>>> +     struct v4l2_fh *vfh = file->private_data;
>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>> +     const struct tegra_video_format *info;
>>> +     int ret;
>>> +     struct v4l2_subdev_format fmt;
>>> +     struct v4l2_subdev *subdev;
>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>> +
>>> +     if (vb2_is_busy(&chan->queue))
>>> +             return -EBUSY;
>>> +
>>> +     /* get supported format by try_fmt */
>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>> +     if (ret)
>>> +             return ret;
>>> +
>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>> +
>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>> +     fmt.pad = 0;
>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>> same here.
>>
Calling subdev set_fmt here for the same reason as explained above.
>>> +
>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>> +     chan->format = *pix;
>>> +     chan->fmtinfo = info;
>>> +     tegra_channel_update_format(chan, pix->width,
>>> +                                 pix->height, info->fourcc,
>>> +                                 &info->bpp,
>>> +                                 pix->bytesperline);
>>> +     *pix = chan->format;
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>> +                                 struct v4l2_input *inp)
>>> +{
>>> +     /* Currently driver supports internal TPG only */
>>> +     if (inp->index != 0)
>> just
>> if (inp->index)
>>
Will update in v2
>>> +             return -EINVAL;
>>> +
>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>> +
>>> +     return 0;
>>> +}
>>> +static const struct tegra_video_format tegra_default_format = {
>>> +     /* RAW 10 */
>>> +     TEGRA_VF_RAW10,
>>> +     10,
>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>> +     {2, 1},
>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>> +     TEGRA_IMAGE_DT_RAW10,
>>> +     V4L2_PIX_FMT_SRGGB10,
>>> +     "RGRG.. GBGB..",
>> It would be more readable to do:
>>
>> .code = TEGRA_VF_RAW10,
>> .width = 10,
>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>
>> and so on
Will update in v2
>>
>>> +};
>>> +
>>> +/*
>>> + * Helper functions
>>> + */
>>> +
>>> +/**
>>> + * tegra_core_get_default_format - Get default format
>>> + *
>>> + * Return: pointer to the format where the default format needs
>>> + * to be filled in.
>>> + */
>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>> +{
>>> +     return &tegra_default_format;
>>> +}
>> This is only used in tegra-channel.c, why not to declare it there as 
>> static?
>>
Will move all video format retrieval helper functions to corresponding 
file as static in v2
>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>> +     {1280, 720},
>>> +     {1920, 1080},
>>> +     {3840, 2160},
>>> +};
>>> +
>>> +/*
>>> + * V4L2 Subdevice Pad Operations
>>> + */
>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>> +                             struct v4l2_subdev_pad_config *cfg,
>>> +                             struct v4l2_subdev_format *fmt)
>>> +{
>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>> +
>>> +     mutex_lock(&csi_chan->format_lock);
>> Do you need this lock? I think there is already a serialization in 
>> the ioctls in place (to be confirmed).
>>
This is on CSI v4l2 subdevice side during format updates
>>> +     memcpy(fmt, &csi_chan->ports->format,
>>> +            sizeof(struct v4l2_mbus_framefmt));
>> I would prefer just:
>> *fmt = *csi_chan->ports->format;
>>
>> I think it is easier to read IMHO.
>> same in tegra_csi_set_format().
>>
Will fix in v2
>>> + mutex_unlock(&csi_chan->format_lock);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>> +{
>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>> +     const struct v4l2_frmsize_discrete *sizes;
>>> +     int i, j;
>> unsigned
>>
Will fix in v2
>>> +
>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>> +             struct v4l2_mbus_framefmt *mbus_fmt = 
>>> &tegra_csi_tpg_fmts[i];
>>> +
>>> +             if (mfmt->code == mbus_fmt->code) {
>>> +                     for (j = 0; j < 
>>> ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>> +                             if (mfmt->width == sizes->width &&
>>> +                                 mfmt->height == sizes->height) {
>>> +                                     return;
>>> +                             }
>>> +                     }
>>> +             }
>>> +
>>> +             dev_info(csi->dev, "using Tegra default RAW10 video 
>>> format\n");
>>> +     }
>>> +
>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT 
>>> (1920x1080)\n");
>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct 
>>> v4l2_mbus_framefmt));
>>> +}
>>> +
>>> + 
>>

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29  0:49       ` Sowjanya Komatineni
@ 2020-01-29  1:05         ` Helen Koike
  2020-01-29  2:11           ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Helen Koike @ 2020-01-29  1:05 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel



On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
> 
> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>
>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>> External email: Use caution opening links or attachments
>>>
>>>
>>> Hi Sowjanya,
>>>
>>> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>>>
>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>
>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>> capture from an external camera sensor connected to CSI or from
>>>> built-in test pattern generator.
>>>>
>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>
>>>> This patch adds a V4L2 media controller and capture driver support
>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>
>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>> digraph board {
>>         rankdir=TB
>>         n00000001 [label="54080000.vi-output-0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>         n00000005 [label="54080000.vi-output-1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>         n00000009 [label="54080000.vi-output-2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>>         n0000000d [label="54080000.vi-output-3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>         n00000011 [label="54080000.vi-output-4\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
>>         n00000015 [label="54080000.vi-output-5\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
>>         n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>         n00000019:port0 -> n00000001
>>         n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>         n0000001d:port0 -> n00000005
>>         n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>         n00000021:port0 -> n00000009
>>         n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>         n00000025:port0 -> n0000000d
>>         n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>         n00000029:port0 -> n00000011
>>         n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>         n0000002d:port0 -> n00000015
>> }
>>
>>>
>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>>>> new file mode 100644
>>>> index 000000000000..84d28e6f4362
>>>> --- /dev/null
>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>> @@ -0,0 +1,33 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>> +/*
>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>> + */
>>>> +
>>>> +#ifndef HOST1X_VIDEO_H
>>>> +#define HOST1X_VIDEO_H 1
>>>> +
>>>> +#include <linux/host1x.h>
>>>> +
>>>> +#include <media/media-device.h>
>>>> +#include <media/media-entity.h>
>>>> +#include <media/v4l2-async.h>
>>>> +#include <media/v4l2-ctrls.h>
>>>> +#include <media/v4l2-device.h>
>>>> +#include <media/v4l2-dev.h>
>>>> +#include <media/videobuf2-v4l2.h>
>>>> +
>>>> +#include "tegra-vi.h"
>>>> +#include "csi.h"
>>>> +
>>>> +struct tegra_camera {
>>>> +     struct v4l2_device v4l2_dev;
>>>> +     struct media_device media_dev;
>>>> +     struct device *dev;
>>> You can use cam->media_dev.dev instead of having this pointer.
>>>
> Will fix in v2
>>>> +     struct tegra_vi *vi;
>>>> +     struct tegra_csi_device *csi;
>>>> +};
>>>> +
>>>> +
>>>> +#define to_tegra_channel(vdev) \
>>>> +     container_of(vdev, struct tegra_channel, video)
>>> Why not inline instead of define. Inlines has the advantage of checking types.
> Will change in v2
>>>
>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>> +                                   struct v4l2_pix_format *pix,
>>>> +                                   const struct tegra_video_format **vfmt)
>>>> +{
>>>> +     const struct tegra_video_format *fmt_info;
>>>> +     struct v4l2_subdev *subdev;
>>>> +     struct v4l2_subdev_format fmt;
>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>> +
>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>> +     if (!pad_cfg)
>>>> +             return -ENOMEM;
>>>> +
>>>> +     /*
>>>> +      * Retrieve format information and select the default format if the
>>>> +      * requested format isn't supported.
>>>> +      */
>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>>>> +     if (!fmt_info) {
>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>> +             pix->colorspace = chan->format.colorspace;
>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>> + pix->pixelformat);
>>>> +     }
>>>> +
>>>> +     /* Change this when start adding interlace format support */
>>>> +     pix->field = V4L2_FIELD_NONE;
>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>> +     fmt.pad = 0;
>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>> As fas as I understand, entities formats should be independent, it is up to link_validate
>>> to check formats between entities.
>>> The capture shouldn't change the format of the subdevice.
>>>
> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source and VI is sink.
> 
> link validation happens only for sink ends of the link.

And what is the problem with it being on the sink end?
You just need to implement custom link validation in tegra_csi_media_ops that also checks the format
between the capture and the subdevice, no? Unless I missunderstood something here (which is quite possible).

Examples:
drivers/staging/media/rkisp1/rkisp1-capture.c - rkisp1_capture_link_validate()
drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - sun6i_video_link_validate()

Regards,
Helen

> 
> So with CSI subdev set_fmt sets width/height to default incase if width/height is not from one of the supported sizes.
> 
>>>
>>>> +
>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>>>> +                             &pix->bytesperline);
>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>> +
>>>> +     if (vfmt)
>>>> +             *vfmt = fmt_info;
>>>> +
>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>> +
>>>> +     return 0;
>>>> +}
>>>> +
>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>> +                                 struct v4l2_format *format)
>>>> +{
>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>> +
>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>>> +}
>>>> +
>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>> +                                 struct v4l2_format *format)
>>>> +{
>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>> +     const struct tegra_video_format *info;
>>>> +     int ret;
>>>> +     struct v4l2_subdev_format fmt;
>>>> +     struct v4l2_subdev *subdev;
>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>> +
>>>> +     if (vb2_is_busy(&chan->queue))
>>>> +             return -EBUSY;
>>>> +
>>>> +     /* get supported format by try_fmt */
>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>> +     if (ret)
>>>> +             return ret;
>>>> +
>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>> +
>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>> +     fmt.pad = 0;
>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>> same here.
>>>
> Calling subdev set_fmt here for the same reason as explained above.
>>>> +
>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>> +     chan->format = *pix;
>>>> +     chan->fmtinfo = info;
>>>> +     tegra_channel_update_format(chan, pix->width,
>>>> +                                 pix->height, info->fourcc,
>>>> +                                 &info->bpp,
>>>> +                                 pix->bytesperline);
>>>> +     *pix = chan->format;
>>>> +
>>>> +     return 0;
>>>> +}
>>>> +
>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>> +                                 struct v4l2_input *inp)
>>>> +{
>>>> +     /* Currently driver supports internal TPG only */
>>>> +     if (inp->index != 0)
>>> just
>>> if (inp->index)
>>>
> Will update in v2
>>>> +             return -EINVAL;
>>>> +
>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>> +
>>>> +     return 0;
>>>> +}
>>>> +static const struct tegra_video_format tegra_default_format = {
>>>> +     /* RAW 10 */
>>>> +     TEGRA_VF_RAW10,
>>>> +     10,
>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>> +     {2, 1},
>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>> +     "RGRG.. GBGB..",
>>> It would be more readable to do:
>>>
>>> .code = TEGRA_VF_RAW10,
>>> .width = 10,
>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>
>>> and so on
> Will update in v2
>>>
>>>> +};
>>>> +
>>>> +/*
>>>> + * Helper functions
>>>> + */
>>>> +
>>>> +/**
>>>> + * tegra_core_get_default_format - Get default format
>>>> + *
>>>> + * Return: pointer to the format where the default format needs
>>>> + * to be filled in.
>>>> + */
>>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>>> +{
>>>> +     return &tegra_default_format;
>>>> +}
>>> This is only used in tegra-channel.c, why not to declare it there as static?
>>>
> Will move all video format retrieval helper functions to corresponding file as static in v2
>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>> +     {1280, 720},
>>>> +     {1920, 1080},
>>>> +     {3840, 2160},
>>>> +};
>>>> +
>>>> +/*
>>>> + * V4L2 Subdevice Pad Operations
>>>> + */
>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>> +                             struct v4l2_subdev_format *fmt)
>>>> +{
>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>> +
>>>> +     mutex_lock(&csi_chan->format_lock);
>>> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>>>
> This is on CSI v4l2 subdevice side during format updates
>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>> I would prefer just:
>>> *fmt = *csi_chan->ports->format;
>>>
>>> I think it is easier to read IMHO.
>>> same in tegra_csi_set_format().
>>>
> Will fix in v2
>>>> + mutex_unlock(&csi_chan->format_lock);
>>>> +
>>>> +     return 0;
>>>> +}
>>>> +
>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>> +{
>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>> +     int i, j;
>>> unsigned
>>>
> Will fix in v2
>>>> +
>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>>>> +
>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>> +                             if (mfmt->width == sizes->width &&
>>>> +                                 mfmt->height == sizes->height) {
>>>> +                                     return;
>>>> +                             }
>>>> +                     }
>>>> +             }
>>>> +
>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>>>> +     }
>>>> +
>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>>>> +}
>>>> +
>>>> + 
>>>

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29  1:05         ` Helen Koike
@ 2020-01-29  2:11           ` Sowjanya Komatineni
  2020-01-29  5:59             ` Sowjanya Komatineni
  2020-01-29 10:31             ` Helen Koike
  0 siblings, 2 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29  2:11 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/28/20 5:05 PM, Helen Koike wrote:
> External email: Use caution opening links or attachments
>
>
> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>> External email: Use caution opening links or attachments
>>>>
>>>>
>>>> Hi Sowjanya,
>>>>
>>>> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>>>>
>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>
>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>> capture from an external camera sensor connected to CSI or from
>>>>> built-in test pattern generator.
>>>>>
>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>
>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>
>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>> digraph board {
>>>          rankdir=TB
>>>          n00000001 [label="54080000.vi-output-0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>>          n00000005 [label="54080000.vi-output-1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>>          n00000009 [label="54080000.vi-output-2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>>>          n0000000d [label="54080000.vi-output-3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>>          n00000011 [label="54080000.vi-output-4\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
>>>          n00000015 [label="54080000.vi-output-5\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
>>>          n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>          n00000019:port0 -> n00000001
>>>          n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>          n0000001d:port0 -> n00000005
>>>          n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>          n00000021:port0 -> n00000009
>>>          n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>          n00000025:port0 -> n0000000d
>>>          n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>          n00000029:port0 -> n00000011
>>>          n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>          n0000002d:port0 -> n00000015
>>> }
>>>
>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>>>>> new file mode 100644
>>>>> index 000000000000..84d28e6f4362
>>>>> --- /dev/null
>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>> @@ -0,0 +1,33 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>> +/*
>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>> + */
>>>>> +
>>>>> +#ifndef HOST1X_VIDEO_H
>>>>> +#define HOST1X_VIDEO_H 1
>>>>> +
>>>>> +#include <linux/host1x.h>
>>>>> +
>>>>> +#include <media/media-device.h>
>>>>> +#include <media/media-entity.h>
>>>>> +#include <media/v4l2-async.h>
>>>>> +#include <media/v4l2-ctrls.h>
>>>>> +#include <media/v4l2-device.h>
>>>>> +#include <media/v4l2-dev.h>
>>>>> +#include <media/videobuf2-v4l2.h>
>>>>> +
>>>>> +#include "tegra-vi.h"
>>>>> +#include "csi.h"
>>>>> +
>>>>> +struct tegra_camera {
>>>>> +     struct v4l2_device v4l2_dev;
>>>>> +     struct media_device media_dev;
>>>>> +     struct device *dev;
>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>
>> Will fix in v2
>>>>> +     struct tegra_vi *vi;
>>>>> +     struct tegra_csi_device *csi;
>>>>> +};
>>>>> +
>>>>> +
>>>>> +#define to_tegra_channel(vdev) \
>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>> Why not inline instead of define. Inlines has the advantage of checking types.
>> Will change in v2
>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>> +                                   struct v4l2_pix_format *pix,
>>>>> +                                   const struct tegra_video_format **vfmt)
>>>>> +{
>>>>> +     const struct tegra_video_format *fmt_info;
>>>>> +     struct v4l2_subdev *subdev;
>>>>> +     struct v4l2_subdev_format fmt;
>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>> +
>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>> +     if (!pad_cfg)
>>>>> +             return -ENOMEM;
>>>>> +
>>>>> +     /*
>>>>> +      * Retrieve format information and select the default format if the
>>>>> +      * requested format isn't supported.
>>>>> +      */
>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>>>>> +     if (!fmt_info) {
>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>> + pix->pixelformat);
>>>>> +     }
>>>>> +
>>>>> +     /* Change this when start adding interlace format support */
>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>> +     fmt.pad = 0;
>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>> As fas as I understand, entities formats should be independent, it is up to link_validate
>>>> to check formats between entities.
>>>> The capture shouldn't change the format of the subdevice.
>>>>
>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source and VI is sink.
>>
>> link validation happens only for sink ends of the link.
> And what is the problem with it being on the sink end?
> You just need to implement custom link validation in tegra_csi_media_ops that also checks the format
> between the capture and the subdevice, no? Unless I missunderstood something here (which is quite possible).
>
> Examples:
> drivers/staging/media/rkisp1/rkisp1-capture.c - rkisp1_capture_link_validate()
> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - sun6i_video_link_validate()
>
> Regards,
> Helen
>
But if we move subdevice side format/size check into its 
link_validation, any incorrect image size set thru set-fmt-video will be 
taken and get-fmt-video will also show same as it doesn't validate 
formats/sizes supported by CSI subdev during this time. link validation 
happens during pipeline start. So thought to prevent accepting incorrect 
format/size during set-fmt-video/get-fmt-video.

Other than this I don't see any issue moving it to link_validation.


>> So with CSI subdev set_fmt sets width/height to default incase if width/height is not from one of the supported sizes.
>>
>>>>> +
>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>>>>> +                             &pix->bytesperline);
>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>> +
>>>>> +     if (vfmt)
>>>>> +             *vfmt = fmt_info;
>>>>> +
>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>> +                                 struct v4l2_format *format)
>>>>> +{
>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>> +
>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>>>> +}
>>>>> +
>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>> +                                 struct v4l2_format *format)
>>>>> +{
>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>> +     const struct tegra_video_format *info;
>>>>> +     int ret;
>>>>> +     struct v4l2_subdev_format fmt;
>>>>> +     struct v4l2_subdev *subdev;
>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>> +
>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>> +             return -EBUSY;
>>>>> +
>>>>> +     /* get supported format by try_fmt */
>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>> +     if (ret)
>>>>> +             return ret;
>>>>> +
>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>> +
>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>> +     fmt.pad = 0;
>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>> same here.
>>>>
>> Calling subdev set_fmt here for the same reason as explained above.
>>>>> +
>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>> +     chan->format = *pix;
>>>>> +     chan->fmtinfo = info;
>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>> +                                 pix->height, info->fourcc,
>>>>> +                                 &info->bpp,
>>>>> +                                 pix->bytesperline);
>>>>> +     *pix = chan->format;
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>> +                                 struct v4l2_input *inp)
>>>>> +{
>>>>> +     /* Currently driver supports internal TPG only */
>>>>> +     if (inp->index != 0)
>>>> just
>>>> if (inp->index)
>>>>
>> Will update in v2
>>>>> +             return -EINVAL;
>>>>> +
>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>> +     /* RAW 10 */
>>>>> +     TEGRA_VF_RAW10,
>>>>> +     10,
>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>> +     {2, 1},
>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>> +     "RGRG.. GBGB..",
>>>> It would be more readable to do:
>>>>
>>>> .code = TEGRA_VF_RAW10,
>>>> .width = 10,
>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>
>>>> and so on
>> Will update in v2
>>>>> +};
>>>>> +
>>>>> +/*
>>>>> + * Helper functions
>>>>> + */
>>>>> +
>>>>> +/**
>>>>> + * tegra_core_get_default_format - Get default format
>>>>> + *
>>>>> + * Return: pointer to the format where the default format needs
>>>>> + * to be filled in.
>>>>> + */
>>>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>>>> +{
>>>>> +     return &tegra_default_format;
>>>>> +}
>>>> This is only used in tegra-channel.c, why not to declare it there as static?
>>>>
>> Will move all video format retrieval helper functions to corresponding file as static in v2
>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>> +     {1280, 720},
>>>>> +     {1920, 1080},
>>>>> +     {3840, 2160},
>>>>> +};
>>>>> +
>>>>> +/*
>>>>> + * V4L2 Subdevice Pad Operations
>>>>> + */
>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>> +{
>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>> +
>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>>>>
>> This is on CSI v4l2 subdevice side during format updates
>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>> I would prefer just:
>>>> *fmt = *csi_chan->ports->format;
>>>>
>>>> I think it is easier to read IMHO.
>>>> same in tegra_csi_set_format().
>>>>
>> Will fix in v2
>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>> +{
>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>> +     int i, j;
>>>> unsigned
>>>>
>> Will fix in v2
>>>>> +
>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>>>>> +
>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>> +                             if (mfmt->width == sizes->width &&
>>>>> +                                 mfmt->height == sizes->height) {
>>>>> +                                     return;
>>>>> +                             }
>>>>> +                     }
>>>>> +             }
>>>>> +
>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>>>>> +     }
>>>>> +
>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>>>>> +}
>>>>> +
>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29  2:11           ` Sowjanya Komatineni
@ 2020-01-29  5:59             ` Sowjanya Komatineni
  2020-01-29 10:31             ` Helen Koike
  1 sibling, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29  5:59 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/28/20 6:11 PM, Sowjanya Komatineni wrote:
>
> On 1/28/20 5:05 PM, Helen Koike wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>>> External email: Use caution opening links or attachments
>>>>>
>>>>>
>>>>> Hi Sowjanya,
>>>>>
>>>>> I just took a really quick look, I didn't check the driver in 
>>>>> deep, so just some small comments below.
>>>>>
>>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>>
>>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>>> capture from an external camera sensor connected to CSI or from
>>>>>> built-in test pattern generator.
>>>>>>
>>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>>
>>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>>
>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>> Could you send us the output of media-ctl --print-dot ? So we can 
>>>>> view the media topology easily?
>>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>>> digraph board {
>>>>          rankdir=TB
>>>>          n00000001 [label="54080000.vi-output-0\n/dev/video0", 
>>>> shape=box, style=filled, fillcolor=yellow]
>>>>          n00000005 [label="54080000.vi-output-1\n/dev/video1", 
>>>> shape=box, style=filled, fillcolor=yellow]
>>>>          n00000009 [label="54080000.vi-output-2\n/dev/video2", 
>>>> shape=box, style=filled, fillcolor=yellow]
>>>>          n0000000d [label="54080000.vi-output-3\n/dev/video3", 
>>>> shape=box, style=filled, fillcolor=yellow]
>>>>          n00000011 [label="54080000.vi-output-4\n/dev/video4", 
>>>> shape=box, style=filled, fillcolor=yellow]
>>>>          n00000015 [label="54080000.vi-output-5\n/dev/video5", 
>>>> shape=box, style=filled, fillcolor=yellow]
>>>>          n00000019 [label="{{} | tpg-0 | {<port0> 0}}", 
>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>          n00000019:port0 -> n00000001
>>>>          n0000001d [label="{{} | tpg-1 | {<port0> 0}}", 
>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>          n0000001d:port0 -> n00000005
>>>>          n00000021 [label="{{} | tpg-2 | {<port0> 0}}", 
>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>          n00000021:port0 -> n00000009
>>>>          n00000025 [label="{{} | tpg-3 | {<port0> 0}}", 
>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>          n00000025:port0 -> n0000000d
>>>>          n00000029 [label="{{} | tpg-4 | {<port0> 0}}", 
>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>          n00000029:port0 -> n00000011
>>>>          n0000002d [label="{{} | tpg-5 | {<port0> 0}}", 
>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>          n0000002d:port0 -> n00000015
>>>> }
>>>>
>>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h 
>>>>>> b/drivers/staging/media/tegra/host1x-video.h
>>>>>> new file mode 100644
>>>>>> index 000000000000..84d28e6f4362
>>>>>> --- /dev/null
>>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>>> @@ -0,0 +1,33 @@
>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>> +/*
>>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>>> + */
>>>>>> +
>>>>>> +#ifndef HOST1X_VIDEO_H
>>>>>> +#define HOST1X_VIDEO_H 1
>>>>>> +
>>>>>> +#include <linux/host1x.h>
>>>>>> +
>>>>>> +#include <media/media-device.h>
>>>>>> +#include <media/media-entity.h>
>>>>>> +#include <media/v4l2-async.h>
>>>>>> +#include <media/v4l2-ctrls.h>
>>>>>> +#include <media/v4l2-device.h>
>>>>>> +#include <media/v4l2-dev.h>
>>>>>> +#include <media/videobuf2-v4l2.h>
>>>>>> +
>>>>>> +#include "tegra-vi.h"
>>>>>> +#include "csi.h"
>>>>>> +
>>>>>> +struct tegra_camera {
>>>>>> +     struct v4l2_device v4l2_dev;
>>>>>> +     struct media_device media_dev;
>>>>>> +     struct device *dev;
>>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>>
>>> Will fix in v2
>>>>>> +     struct tegra_vi *vi;
>>>>>> +     struct tegra_csi_device *csi;
>>>>>> +};
>>>>>> +
>>>>>> +
>>>>>> +#define to_tegra_channel(vdev) \
>>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>>> Why not inline instead of define. Inlines has the advantage of 
>>>>> checking types.
>>> Will change in v2
>>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>>> +                                   struct v4l2_pix_format *pix,
>>>>>> +                                   const struct 
>>>>>> tegra_video_format **vfmt)
>>>>>> +{
>>>>>> +     const struct tegra_video_format *fmt_info;
>>>>>> +     struct v4l2_subdev *subdev;
>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>>> +
>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>>> +     if (!pad_cfg)
>>>>>> +             return -ENOMEM;
>>>>>> +
>>>>>> +     /*
>>>>>> +      * Retrieve format information and select the default 
>>>>>> format if the
>>>>>> +      * requested format isn't supported.
>>>>>> +      */
>>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, 
>>>>>> pix->pixelformat);
>>>>>> +     if (!fmt_info) {
>>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>>> + pix->pixelformat);
>>>>>> +     }
>>>>>> +
>>>>>> +     /* Change this when start adding interlace format support */
>>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>>> +     fmt.pad = 0;
>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>>> As fas as I understand, entities formats should be independent, it 
>>>>> is up to link_validate
>>>>> to check formats between entities.
>>>>> The capture shouldn't change the format of the subdevice.
>>>>>
>>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is 
>>> source and VI is sink.
>>>
>>> link validation happens only for sink ends of the link.
>> And what is the problem with it being on the sink end?
>> You just need to implement custom link validation in 
>> tegra_csi_media_ops that also checks the format
>> between the capture and the subdevice, no? Unless I missunderstood 
>> something here (which is quite possible).
>>
>> Examples:
>> drivers/staging/media/rkisp1/rkisp1-capture.c - 
>> rkisp1_capture_link_validate()
>> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
>> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - 
>> sun6i_video_link_validate()
>>
>> Regards,
>> Helen
>>
> But if we move subdevice side format/size check into its 
> link_validation, any incorrect image size set thru set-fmt-video will 
> be taken and get-fmt-video will also show same as it doesn't validate 
> formats/sizes supported by CSI subdev during this time. link 
> validation happens during pipeline start. So thought to prevent 
> accepting incorrect format/size during set-fmt-video/get-fmt-video.
>
> Other than this I don't see any issue moving it to link_validation.
>
link validation happens for all the links in the pipeline where both of 
the ends of the links are V4L2 sub-devices.

v4l2_subdev_link_validate calls sink pad link_validate.

This driver has currently TPG support only where CSI v4l2 subdevice is 
the source and VI is the sink video entity.


>
>>> So with CSI subdev set_fmt sets width/height to default incase if 
>>> width/height is not from one of the supported sizes.
>>>
>>>>>> +
>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, 
>>>>>> &pix->height,
>>>>>> + &pix->bytesperline);
>>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>>> +
>>>>>> +     if (vfmt)
>>>>>> +             *vfmt = fmt_info;
>>>>>> +
>>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>>> +
>>>>>> +     return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>>> +                                 struct v4l2_format *format)
>>>>>> +{
>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>> +
>>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, 
>>>>>> NULL);
>>>>>> +}
>>>>>> +
>>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>>> +                                 struct v4l2_format *format)
>>>>>> +{
>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>> +     const struct tegra_video_format *info;
>>>>>> +     int ret;
>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>> +     struct v4l2_subdev *subdev;
>>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>>> +
>>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>>> +             return -EBUSY;
>>>>>> +
>>>>>> +     /* get supported format by try_fmt */
>>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>>> +     if (ret)
>>>>>> +             return ret;
>>>>>> +
>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>> +
>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>>> +     fmt.pad = 0;
>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>>> same here.
>>>>>
>>> Calling subdev set_fmt here for the same reason as explained above.
>>>>>> +
>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>> +     chan->format = *pix;
>>>>>> +     chan->fmtinfo = info;
>>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>>> +                                 pix->height, info->fourcc,
>>>>>> +                                 &info->bpp,
>>>>>> +                                 pix->bytesperline);
>>>>>> +     *pix = chan->format;
>>>>>> +
>>>>>> +     return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>>> +                                 struct v4l2_input *inp)
>>>>>> +{
>>>>>> +     /* Currently driver supports internal TPG only */
>>>>>> +     if (inp->index != 0)
>>>>> just
>>>>> if (inp->index)
>>>>>
>>> Will update in v2
>>>>>> +             return -EINVAL;
>>>>>> +
>>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>>> +
>>>>>> +     return 0;
>>>>>> +}
>>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>>> +     /* RAW 10 */
>>>>>> +     TEGRA_VF_RAW10,
>>>>>> +     10,
>>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>> +     {2, 1},
>>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>>> +     "RGRG.. GBGB..",
>>>>> It would be more readable to do:
>>>>>
>>>>> .code = TEGRA_VF_RAW10,
>>>>> .width = 10,
>>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>
>>>>> and so on
>>> Will update in v2
>>>>>> +};
>>>>>> +
>>>>>> +/*
>>>>>> + * Helper functions
>>>>>> + */
>>>>>> +
>>>>>> +/**
>>>>>> + * tegra_core_get_default_format - Get default format
>>>>>> + *
>>>>>> + * Return: pointer to the format where the default format needs
>>>>>> + * to be filled in.
>>>>>> + */
>>>>>> +const struct tegra_video_format 
>>>>>> *tegra_core_get_default_format(void)
>>>>>> +{
>>>>>> +     return &tegra_default_format;
>>>>>> +}
>>>>> This is only used in tegra-channel.c, why not to declare it there 
>>>>> as static?
>>>>>
>>> Will move all video format retrieval helper functions to 
>>> corresponding file as static in v2
>>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>>> +     {1280, 720},
>>>>>> +     {1920, 1080},
>>>>>> +     {3840, 2160},
>>>>>> +};
>>>>>> +
>>>>>> +/*
>>>>>> + * V4L2 Subdevice Pad Operations
>>>>>> + */
>>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>>> +{
>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>> +
>>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>>> Do you need this lock? I think there is already a serialization in 
>>>>> the ioctls in place (to be confirmed).
>>>>>
>>> This is on CSI v4l2 subdevice side during format updates
>>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>>> I would prefer just:
>>>>> *fmt = *csi_chan->ports->format;
>>>>>
>>>>> I think it is easier to read IMHO.
>>>>> same in tegra_csi_set_format().
>>>>>
>>> Will fix in v2
>>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>>> +
>>>>>> +     return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>>> +{
>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>>> +     int i, j;
>>>>> unsigned
>>>>>
>>> Will fix in v2
>>>>>> +
>>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = 
>>>>>> &tegra_csi_tpg_fmts[i];
>>>>>> +
>>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>>> +                     for (j = 0; j < 
>>>>>> ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>>> +                             if (mfmt->width == sizes->width &&
>>>>>> +                                 mfmt->height == sizes->height) {
>>>>>> +                                     return;
>>>>>> +                             }
>>>>>> +                     }
>>>>>> +             }
>>>>>> +
>>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video 
>>>>>> format\n");
>>>>>> +     }
>>>>>> +
>>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT 
>>>>>> (1920x1080)\n");
>>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct 
>>>>>> v4l2_mbus_framefmt));
>>>>>> +}
>>>>>> +
>>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-28 18:23 ` [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree Sowjanya Komatineni
@ 2020-01-29  9:46   ` Thierry Reding
  2020-01-29 16:22     ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Thierry Reding @ 2020-01-29  9:46 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3527 bytes --]

On Tue, Jan 28, 2020 at 10:23:21AM -0800, Sowjanya Komatineni wrote:
> Tegra210 contains VI controller for video input capture from MIPI
> CSI camera sensors and also supports built-in test pattern generator.
> 
> CSI ports can be one-to-one mapped to VI channels for capturing from
> an external sensor or from built-in test pattern generator.
> 
> This patch adds support for VI and CSI and enables them in Tegra210
> device tree.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  8 +++++++
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 +++++++++++++++++++++++++-
>  2 files changed, 38 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> index b0095072bc28..ec1b3033fa03 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> @@ -10,6 +10,14 @@
>  			status = "okay";
>  		};
>  
> +		vi@54080000 {
> +			status = "okay";
> +		};
> +
> +		csi@0x54080838 {
> +			status = "okay";
> +		};
> +
>  		sor@54580000 {
>  			status = "okay";
>  
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index 48c63256ba7f..c6107ec03ad1 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -136,9 +136,38 @@
>  
>  		vi@54080000 {
>  			compatible = "nvidia,tegra210-vi";
> -			reg = <0x0 0x54080000 0x0 0x00040000>;
> +			reg = <0x0 0x54080000 0x0 0x808>;
>  			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>  			status = "disabled";
> +			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
> +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
> +
> +			clocks = <&tegra_car TEGRA210_CLK_VI>;
> +			clock-names = "vi";
> +			resets = <&tegra_car 20>;
> +			reset-names = "vi";
> +		};
> +
> +		csi@0x54080838 {
> +			compatible = "nvidia,tegra210-csi";
> +			reg = <0x0 0x54080838 0x0 0x2000>;
> +			status = "disabled";
> +			assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
> +					  <&tegra_car TEGRA210_CLK_CILCD>,
> +					  <&tegra_car TEGRA210_CLK_CILE>;
> +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
> +						 <&tegra_car TEGRA210_CLK_PLL_P>,
> +						 <&tegra_car TEGRA210_CLK_PLL_P>;
> +			assigned-clock-rates = <102000000>,
> +					       <102000000>,
> +					       <102000000>;
> +
> +			clocks = <&tegra_car TEGRA210_CLK_CSI>,
> +				 <&tegra_car TEGRA210_CLK_CILAB>,
> +				 <&tegra_car TEGRA210_CLK_CILCD>,
> +				 <&tegra_car TEGRA210_CLK_CILE>;
> +			clock-names = "csi", "cilab", "cilcd", "cile";
> +
>  		};

Can this be a child of the vi node? Looking at the register ranges it
seems like these are actually a single IP block. If they have separate
blocks with clearly separate functionality, then it makes sense to have
CSI be a child node of VI, though it may also be okay to merge both and
have a single node with the driver doing all of the differentiation
between what's VI and what's CSI.

Looking at later chips, the split between VI and CSI is more explicit,
so having the split in DT for Tegra210 may make sense for consistency.

I know we've discussed this before, but for some reason I keep coming
back to this. I'll go through the other patches to see if I can get a
clearer picture of how this could all work together.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 22:13     ` Sowjanya Komatineni
  2020-01-29  0:49       ` Sowjanya Komatineni
@ 2020-01-29 10:09       ` Thierry Reding
  2020-01-29 16:25         ` Sowjanya Komatineni
  1 sibling, 1 reply; 55+ messages in thread
From: Thierry Reding @ 2020-01-29 10:09 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: Helen Koike, jonathanh, frankc, hverkuil, linux-media,
	devicetree, linux-clk, linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1048 bytes --]

On Tue, Jan 28, 2020 at 02:13:17PM -0800, Sowjanya Komatineni wrote:
> On 1/28/20 1:45 PM, Helen Koike wrote:
[...]
> > On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
[...]
> > > +const struct tegra_csi_fops csi2_fops = {
> > > +     .hw_init = csi2_hw_init,
> > > +     .csi_start_streaming = csi2_start_streaming,
> > > +     .csi_err_status = csi2_error_status,
> > > +};
> > If I saw correctly, you don't have other instances of struct tegra_csi_fops with different functions.
> > So why not exposing the functions directly instead of creating a global variable?
> Currently driver supports Tegra210 only. Later we will add for Tegra186 and
> Tegra184 support too where we will have separate csi fops.

Perhaps this structure should be prefixed with a tegra210_ to make that
more obvious?

> > > +EXPORT_SYMBOL(csi2_fops);

Also, why do we need to export these? These will be built as linked into
the Tegra VI driver, which is the only one that uses these, right? Would
it not be enough to just make it global? Why the need to export?

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29  2:11           ` Sowjanya Komatineni
  2020-01-29  5:59             ` Sowjanya Komatineni
@ 2020-01-29 10:31             ` Helen Koike
  2020-01-29 17:49               ` Sowjanya Komatineni
  1 sibling, 1 reply; 55+ messages in thread
From: Helen Koike @ 2020-01-29 10:31 UTC (permalink / raw)
  To: Sowjanya Komatineni, Helen Koike, thierry.reding, jonathanh,
	frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel



On 1/29/20 12:11 AM, Sowjanya Komatineni wrote:
> 
> On 1/28/20 5:05 PM, Helen Koike wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>>> External email: Use caution opening links or attachments
>>>>>
>>>>>
>>>>> Hi Sowjanya,
>>>>>
>>>>> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>>>>>
>>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>>
>>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>>> capture from an external camera sensor connected to CSI or from
>>>>>> built-in test pattern generator.
>>>>>>
>>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>>
>>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>>
>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
>>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>>> digraph board {
>>>>          rankdir=TB
>>>>          n00000001 [label="54080000.vi-output-0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>>>          n00000005 [label="54080000.vi-output-1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>>>          n00000009 [label="54080000.vi-output-2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>>>>          n0000000d [label="54080000.vi-output-3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>>>          n00000011 [label="54080000.vi-output-4\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
>>>>          n00000015 [label="54080000.vi-output-5\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
>>>>          n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>          n00000019:port0 -> n00000001
>>>>          n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>          n0000001d:port0 -> n00000005
>>>>          n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>          n00000021:port0 -> n00000009
>>>>          n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>          n00000025:port0 -> n0000000d
>>>>          n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>          n00000029:port0 -> n00000011
>>>>          n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>          n0000002d:port0 -> n00000015
>>>> }
>>>>
>>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>>>>>> new file mode 100644
>>>>>> index 000000000000..84d28e6f4362
>>>>>> --- /dev/null
>>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>>> @@ -0,0 +1,33 @@
>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>> +/*
>>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>>> + */
>>>>>> +
>>>>>> +#ifndef HOST1X_VIDEO_H
>>>>>> +#define HOST1X_VIDEO_H 1
>>>>>> +
>>>>>> +#include <linux/host1x.h>
>>>>>> +
>>>>>> +#include <media/media-device.h>
>>>>>> +#include <media/media-entity.h>
>>>>>> +#include <media/v4l2-async.h>
>>>>>> +#include <media/v4l2-ctrls.h>
>>>>>> +#include <media/v4l2-device.h>
>>>>>> +#include <media/v4l2-dev.h>
>>>>>> +#include <media/videobuf2-v4l2.h>
>>>>>> +
>>>>>> +#include "tegra-vi.h"
>>>>>> +#include "csi.h"
>>>>>> +
>>>>>> +struct tegra_camera {
>>>>>> +     struct v4l2_device v4l2_dev;
>>>>>> +     struct media_device media_dev;
>>>>>> +     struct device *dev;
>>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>>
>>> Will fix in v2
>>>>>> +     struct tegra_vi *vi;
>>>>>> +     struct tegra_csi_device *csi;
>>>>>> +};
>>>>>> +
>>>>>> +
>>>>>> +#define to_tegra_channel(vdev) \
>>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>>> Why not inline instead of define. Inlines has the advantage of checking types.
>>> Will change in v2
>>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>>> +                                   struct v4l2_pix_format *pix,
>>>>>> +                                   const struct tegra_video_format **vfmt)
>>>>>> +{
>>>>>> +     const struct tegra_video_format *fmt_info;
>>>>>> +     struct v4l2_subdev *subdev;
>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>>> +
>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>>> +     if (!pad_cfg)
>>>>>> +             return -ENOMEM;
>>>>>> +
>>>>>> +     /*
>>>>>> +      * Retrieve format information and select the default format if the
>>>>>> +      * requested format isn't supported.
>>>>>> +      */
>>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>>>>>> +     if (!fmt_info) {
>>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>>> + pix->pixelformat);
>>>>>> +     }
>>>>>> +
>>>>>> +     /* Change this when start adding interlace format support */
>>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>>> +     fmt.pad = 0;
>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>>> As fas as I understand, entities formats should be independent, it is up to link_validate
>>>>> to check formats between entities.
>>>>> The capture shouldn't change the format of the subdevice.
>>>>>
>>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source and VI is sink.
>>>
>>> link validation happens only for sink ends of the link.
>> And what is the problem with it being on the sink end?
>> You just need to implement custom link validation in tegra_csi_media_ops that also checks the format
>> between the capture and the subdevice, no? Unless I missunderstood something here (which is quite possible).
>>
>> Examples:
>> drivers/staging/media/rkisp1/rkisp1-capture.c - rkisp1_capture_link_validate()
>> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
>> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - sun6i_video_link_validate()
>>
>> Regards,
>> Helen
>>
> But if we move subdevice side format/size check into its link_validation, any incorrect image size set thru set-fmt-video will be taken and get-fmt-video will also show same as it doesn't validate formats/sizes supported by CSI subdev during this time. link validation happens during pipeline start. So thought to prevent accepting incorrect format/size during set-fmt-video/get-fmt-video.

This is how media API is designed, formats shouldn't propagate between entities, it is up to userspace to configure pads
correctly. And if formats of the pads don't match, stream fails during pipeline start, and userspace receive -EPIPE error.

According to the docs: https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/dev-subdev.html

"Formats are not propagated across links, as that would involve propagating them from one sub-device file handle to another. Applications must then take care to configure both ends of every link explicitly with compatible formats. Identical formats on the two ends of a link are guaranteed to be compatible. Drivers are free to accept different formats matching device requirements as being compatible."

Perhaps you want to add support of this driver in libcamera.org to make it easier to userspace.

Regards,
Helen

> 
> Other than this I don't see any issue moving it to link_validation.
> 
> 
>>> So with CSI subdev set_fmt sets width/height to default incase if width/height is not from one of the supported sizes.
>>>
>>>>>> +
>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>>>>>> +                             &pix->bytesperline);
>>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>>> +
>>>>>> +     if (vfmt)
>>>>>> +             *vfmt = fmt_info;
>>>>>> +
>>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>>> +
>>>>>> +     return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>>> +                                 struct v4l2_format *format)
>>>>>> +{
>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>> +
>>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>>>>> +}
>>>>>> +
>>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>>> +                                 struct v4l2_format *format)
>>>>>> +{
>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>> +     const struct tegra_video_format *info;
>>>>>> +     int ret;
>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>> +     struct v4l2_subdev *subdev;
>>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>>> +
>>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>>> +             return -EBUSY;
>>>>>> +
>>>>>> +     /* get supported format by try_fmt */
>>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>>> +     if (ret)
>>>>>> +             return ret;
>>>>>> +
>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>> +
>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>>> +     fmt.pad = 0;
>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>>> same here.
>>>>>
>>> Calling subdev set_fmt here for the same reason as explained above.
>>>>>> +
>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>> +     chan->format = *pix;
>>>>>> +     chan->fmtinfo = info;
>>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>>> +                                 pix->height, info->fourcc,
>>>>>> +                                 &info->bpp,
>>>>>> +                                 pix->bytesperline);
>>>>>> +     *pix = chan->format;
>>>>>> +
>>>>>> +     return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>>> +                                 struct v4l2_input *inp)
>>>>>> +{
>>>>>> +     /* Currently driver supports internal TPG only */
>>>>>> +     if (inp->index != 0)
>>>>> just
>>>>> if (inp->index)
>>>>>
>>> Will update in v2
>>>>>> +             return -EINVAL;
>>>>>> +
>>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>>> +
>>>>>> +     return 0;
>>>>>> +}
>>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>>> +     /* RAW 10 */
>>>>>> +     TEGRA_VF_RAW10,
>>>>>> +     10,
>>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>> +     {2, 1},
>>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>>> +     "RGRG.. GBGB..",
>>>>> It would be more readable to do:
>>>>>
>>>>> .code = TEGRA_VF_RAW10,
>>>>> .width = 10,
>>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>
>>>>> and so on
>>> Will update in v2
>>>>>> +};
>>>>>> +
>>>>>> +/*
>>>>>> + * Helper functions
>>>>>> + */
>>>>>> +
>>>>>> +/**
>>>>>> + * tegra_core_get_default_format - Get default format
>>>>>> + *
>>>>>> + * Return: pointer to the format where the default format needs
>>>>>> + * to be filled in.
>>>>>> + */
>>>>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>>>>> +{
>>>>>> +     return &tegra_default_format;
>>>>>> +}
>>>>> This is only used in tegra-channel.c, why not to declare it there as static?
>>>>>
>>> Will move all video format retrieval helper functions to corresponding file as static in v2
>>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>>> +     {1280, 720},
>>>>>> +     {1920, 1080},
>>>>>> +     {3840, 2160},
>>>>>> +};
>>>>>> +
>>>>>> +/*
>>>>>> + * V4L2 Subdevice Pad Operations
>>>>>> + */
>>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>>> +{
>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>> +
>>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>>> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>>>>>
>>> This is on CSI v4l2 subdevice side during format updates
>>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>>> I would prefer just:
>>>>> *fmt = *csi_chan->ports->format;
>>>>>
>>>>> I think it is easier to read IMHO.
>>>>> same in tegra_csi_set_format().
>>>>>
>>> Will fix in v2
>>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>>> +
>>>>>> +     return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>>> +{
>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>>> +     int i, j;
>>>>> unsigned
>>>>>
>>> Will fix in v2
>>>>>> +
>>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>>>>>> +
>>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>>> +                             if (mfmt->width == sizes->width &&
>>>>>> +                                 mfmt->height == sizes->height) {
>>>>>> +                                     return;
>>>>>> +                             }
>>>>>> +                     }
>>>>>> +             }
>>>>>> +
>>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>>>>>> +     }
>>>>>> +
>>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>>>>>> +}
>>>>>> +
>>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 18:23 ` [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210 Sowjanya Komatineni
  2020-01-28 21:45   ` Helen Koike
@ 2020-01-29 11:13   ` Thierry Reding
  2020-01-29 17:23     ` Sowjanya Komatineni
  2020-01-29 14:16   ` Hans Verkuil (hansverk)
                     ` (2 subsequent siblings)
  4 siblings, 1 reply; 55+ messages in thread
From: Thierry Reding @ 2020-01-29 11:13 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 28649 bytes --]

On Tue, Jan 28, 2020 at 10:23:20AM -0800, Sowjanya Komatineni wrote:
> diff --git a/drivers/staging/media/tegra/csi.h b/drivers/staging/media/tegra/csi.h
[...]
> +struct tegra_csi_soc_data {

I'd just leave out the _data suffix since it's not useful.

> +	const struct tegra_csi_fops *csi_fops;
> +	unsigned int cil_max_clk_hz;
> +	unsigned int num_tpg_channels;
> +};
> +
> +/**
> + * struct tegra_csi_device - NVIDIA Tegra CSI device structure
> + * @dev: device struct
> + * @client: host1x_client struct
> + *
> + * @iomem: register base
> + * @csi_clk: clock for CSI
> + * @cilab_clk: clock for CIL AB
> + * @cilcd_clk: clock for CIL CD
> + * @cilef_clk: clock for CIL EF
> + * @tpg_clk: clock for internal CSI TPG logic
> + *
> + * @soc_data: pointer to SoC data structure
> + * @fops: csi operations
> + *
> + * @channels: list of CSI channels
> + */
> +struct tegra_csi_device {
> +	struct device *dev;
> +	struct host1x_client client;
> +
> +	void __iomem *iomem;
> +	struct clk *csi_clk;
> +	struct clk *cilab_clk;
> +	struct clk *cilcd_clk;
> +	struct clk *cilef_clk;
> +	struct clk *tpg_clk;
> +	atomic_t clk_refcnt;
> +
> +	const struct tegra_csi_soc_data *soc_data;

Same here. No need for the _data suffix, it's just an extra 5 characters
that you have to potentially repeat a lot but doesn't add anything.

> +	const struct tegra_csi_fops *fops;
> +
> +	struct list_head csi_chans;
> +};
> +
> +void tegra_csi_error_status(struct v4l2_subdev *subdev);
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/csi2_fops.c b/drivers/staging/media/tegra/csi2_fops.c
> new file mode 100644
> index 000000000000..5f2f7bd3ae50
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi2_fops.c
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk/tegra.h>
> +#include <linux/delay.h>
> +
> +#include "vi2_registers.h"
> +#include "mc_common.h"
> +#include "csi2_fops.h"
> +#include "csi.h"
> +
> +/* CSI block registers offset */
> +#define TEGRA210_CSI_PORT_OFFSET		0x34
> +/* CSI CIL parition registers offset */
> +#define TEGRA210_CSI_CIL_OFFSET			0x0f4
> +/* CSI TPG registers offset */
> +#define TEGRA210_CSI_TPG_OFFSET			0x18c
> +
> +#define CSI_PP_OFFSET(block)	((block) * 0x800)
> +
> +static void csi_write(struct tegra_csi_channel *chan, u8 block,
> +		      unsigned int addr, u32 val)
> +{
> +	void __iomem *csi_pp_base;
> +
> +	csi_pp_base = chan->csi->iomem + CSI_PP_OFFSET(block);
> +	writel(val, csi_pp_base + addr);
> +}
> +
> +/* Pixel parser registers accessors */
> +static void pp_write(struct tegra_csi_port *port, u32 addr, u32 val)
> +{
> +	writel(val, port->pixel_parser + addr);
> +}
> +
> +static u32 pp_read(struct tegra_csi_port *port, u32 addr)
> +{
> +	return readl(port->pixel_parser + addr);
> +}
> +
> +/* CSI CIL A/B port registers accessors */
> +static void cil_write(struct tegra_csi_port *port, u8 port_id,
> +		      u32 addr, u32 val)
> +{
> +	if (port_id & PORT_B)
> +		writel(val, port->cilb + addr);
> +	else
> +		writel(val, port->cila + addr);
> +}
> +
> +static u32 cil_read(struct tegra_csi_port *port, u8 port_id,
> +		    u32 addr)
> +{
> +	if (port_id & PORT_B)
> +		return readl(port->cilb + addr);
> +	else
> +		return readl(port->cila + addr);
> +}
> +
> +/* Test pattern generator registers accessor */
> +static void tpg_write(struct tegra_csi_port *port, unsigned int addr, u32 val)
> +{
> +	writel(val, port->tpg + addr);
> +}

These register accessors all look a bit convoluted to me. For example,
the cil_write()/cil_read() take a port ID in order to select between
port->cila and port->cilb register banks. But then during ->hw_init()
you need to go and assign port->cila and port->cilb using a CIL base
and a port offset from that base.

So it sounds like this could be done much easier by doing something
like:

	static u32 cil_read(struct tegra_csi_port *port, u8 port_id, u32 addr)
	{
		unsigned int offset = port_id * TEGRA210_CSI_PORT_OFFSET;

		return readl(port->cila + TEGRA210_CSI_CIL_OFFSET + offset);
	}

Obviously there'd be no need for port->cilb in that case and port->cila
could just be port->cil. Furthermore, since you have the prefixes here
it sounds like these will be different for other generations, so perhaps
they can be parameterized as part of the SoC-specific structure?

Another thing that I find confusing is that we have a structure called
tegra_csi_port, but in order to access registers within it we also need
to pass a port ID. So it sounds like whatever tegra_csi_port represents
isn't really a port.

Do you have any ideas on how to simplify this? It's not a terribly big
deal, so feel free to leave it like this for now. I can take a look at
simplifying later on if it keeps bugging me.

> +static int csi2_start_streaming(struct tegra_csi_channel *csi_chan,
> +				u8 pg_mode, int enable)
> +{
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	unsigned int port_num = csi_chan->csi_port_num;
> +	unsigned int block = port_num >> 1;
> +	struct tegra_csi_port *port = csi_chan->ports;
> +	unsigned int cil_max_freq = csi->soc_data->cil_max_clk_hz;
> +	struct clk *cil_clk;
> +	int ret;
> +
> +	if (block == CSI_CIL_AB)
> +		cil_clk = csi->cilab_clk;
> +	else if (block == CSI_CIL_CD)
> +		cil_clk = csi->cilcd_clk;
> +	else
> +		cil_clk = csi->cilef_clk;
> +
> +	if (enable) {
> +		ret = clk_set_rate(cil_clk, cil_max_freq);
> +		if (ret)
> +			dev_err(csi->dev,
> +				"failed to set cil clk rate, err: %d\n", ret);

Perhaps dev_warn() since it's not a fatal error? Also, maybe spell out
"clock" in error messages (and perhaps s/cil/CIL/). I also personally
prefer the style of error messages to be:

	"failed to ...: %d\n"

i.e. without that ", err" in there. We use that style very widely, which
has the advantage of making the log look very consistent.

> +
> +		/* enable CIL clock on first open */
> +		if (atomic_add_return(1, &csi->clk_refcnt) == 1) {
> +			ret = clk_prepare_enable(cil_clk);
> +			if (ret) {
> +				dev_err(csi->dev,
> +					"failed to enable cil clk, err: %d\n",
> +					ret);
> +				return ret;
> +			}
> +		}
> +
> +		/*
> +		 * On Tegra210, TPG internal logic uses PLLD out along with
> +		 * the CIL clock.
> +		 * So, enable TPG clock during TPG mode streaming.
> +		 */
> +		if (pg_mode) {
> +			ret = clk_set_rate(csi->tpg_clk, TEGRA210_TPG_CLOCK);
> +			if (ret)
> +				dev_err(csi->dev,
> +					"failed to set tpg clk rate\n");
> +
> +			ret = clk_prepare_enable(csi->tpg_clk);
> +			if (ret) {
> +				dev_err(csi->dev,
> +					"failed to enable tpg clk, err: %d\n",
> +					ret);
> +				return ret;
> +			}
> +		}
> +
> +		csi_write(csi_chan, block, TEGRA_CSI_CLKEN_OVERRIDE, 0);
> +
> +		/* clean up status */
> +		pp_write(port, TEGRA_CSI_PIXEL_PARSER_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CILX_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
> +
> +		/* CIL PHY registers setup */
> +		cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
> +
> +		/*
> +		 * The CSI unit provides for connection of up to six cameras in
> +		 * the system and is organized as three identical instances of
> +		 * two MIPI support blocks, each with a separate 4-lane
> +		 * interface that can be configured as a single camera with 4
> +		 * lanes or as a dual camera with 2 lanes available for each
> +		 * camera.
> +		 */
> +		if (port->lanes == 4) {
> +			cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0,
> +				  BRICK_CLOCK_A_4X);
> +
> +			cil_write(port, (port_num + 1),

No need for parentheses around "port_num + 1" here and below.

> +				  TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
> +
> +			cil_write(port, (port_num + 1),
> +				  TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
> +
> +			cil_write(port, (port_num + 1),
> +				  TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
> +
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_ENABLE);
> +		} else {
> +			u32 val = ((port_num & 1) == PORT_A) ?
> +				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_NOP :
> +				  CSI_B_PHY_CIL_ENABLE | CSI_A_PHY_CIL_NOP;
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  val);
> +		}
> +
> +		/* CSI pixel parser registers setup */
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_RST);
> +		pp_write(port, TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK, 0x0);
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL0,
> +			 CSI_PP_PACKET_HEADER_SENT |
> +			 CSI_PP_DATA_IDENTIFIER_ENABLE |
> +			 CSI_PP_WORD_COUNT_SELECT_HEADER |
> +			 CSI_PP_CRC_CHECK_ENABLE |  CSI_PP_WC_CHECK |
> +			 CSI_PP_OUTPUT_FORMAT_STORE |
> +			 CSI_PP_HEADER_EC_DISABLE | CSI_PPA_PAD_FRAME_NOPAD |
> +			 (port_num & 1));
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL1,
> +			 (0x1 << CSI_PP_TOP_FIELD_FRAME_OFFSET) |
> +			 (0x1 << CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET));
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_GAP,
> +			 0x14 << PP_FRAME_MIN_GAP_OFFSET);
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME, 0x0);
> +		pp_write(port, TEGRA_CSI_INPUT_STREAM_CONTROL,
> +			 (0x3f << CSI_SKIP_PACKET_THRESHOLD_OFFSET) |
> +			 (port->lanes - 1));
> +
> +		/* TPG setup */
> +		if (pg_mode) {
> +			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
> +				  ((pg_mode - 1) << PG_MODE_OFFSET) |
> +				  PG_ENABLE);
> +			tpg_write(port, TEGRA_CSI_PG_PHASE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_RED_FREQ,
> +				  (0x10 << PG_RED_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_RED_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_RED_FREQ_RATE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ,
> +				  (0x10 << PG_GREEN_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_GREEN_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ_RATE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ,
> +				  (0x10 << PG_BLUE_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_BLUE_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ_RATE, 0x0);
> +		}
> +
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_ENABLE);
> +	} else {
> +		u32 val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
> +
> +		dev_dbg(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n",
> +			val);

Are these still useful? I notice that you don't have debug output for
the case where enable == true.

> +
> +		val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
> +		dev_dbg(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
> +
> +		val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
> +		dev_dbg(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
> +
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_DISABLE);
> +
> +		if (pg_mode) {
> +			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
> +				  ((pg_mode - 1) << PG_MODE_OFFSET) |
> +				  PG_DISABLE);
> +			clk_disable_unprepare(csi->tpg_clk);
> +		}
> +
> +		if (port->lanes == 4) {
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  CSI_A_PHY_CIL_DISABLE |
> +				  CSI_B_PHY_CIL_DISABLE);
> +
> +		} else {
> +			u32 val = ((port_num & 1) == PORT_A) ?
> +				  CSI_A_PHY_CIL_DISABLE | CSI_B_PHY_CIL_NOP :
> +				  CSI_B_PHY_CIL_DISABLE | CSI_A_PHY_CIL_NOP;
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  val);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int csi2_hw_init(struct tegra_csi_device *csi)
> +{
> +	struct tegra_csi_channel *csi_chan;
> +	struct tegra_csi_port *port;
> +	u8 portno;
> +	int ret;
> +
> +	csi->cilab_clk = devm_clk_get(csi->dev, "cilab");
> +	if (IS_ERR(csi->cilab_clk)) {
> +		dev_err(csi->dev, "Failed to get cilab clock\n");

Maybe output the error code here? The important thing here is to make
error messages consistent, which can simplify analysis of the kernel log
later on.

> +		return PTR_ERR(csi->cilab_clk);
> +	}
> +
> +	csi->cilcd_clk = devm_clk_get(csi->dev, "cilcd");
> +	if (IS_ERR(csi->cilcd_clk)) {
> +		dev_err(csi->dev, "Failed to get cilcd clock\n");
> +		return PTR_ERR(csi->cilcd_clk);
> +	}
> +
> +	csi->cilef_clk = devm_clk_get(csi->dev, "cile");
> +	if (IS_ERR(csi->cilef_clk)) {
> +		dev_err(csi->dev, "Failed to get cile clock\n");
> +		return PTR_ERR(csi->cilef_clk);
> +	}
> +
> +	csi->tpg_clk = devm_clk_get(csi->dev, "csi_tpg");
> +	if (IS_ERR(csi->tpg_clk)) {
> +		dev_err(csi->dev, "Failed to get csi_tpg clock\n");
> +		return PTR_ERR(csi->tpg_clk);
> +	}
> +
> +	csi->csi_clk = devm_clk_get(csi->dev, "csi");
> +	if (IS_ERR(csi->csi_clk)) {
> +		dev_err(csi->dev, "Failed to get csi clock\n");
> +		return PTR_ERR(csi->csi_clk);
> +	}
> +
> +	ret = clk_prepare_enable(csi->csi_clk);
> +	if (ret) {
> +		dev_err(csi->dev, "Failed to enable csi clk, err: %d\n", ret);
> +		return ret;
> +	}
> +
> +	list_for_each_entry(csi_chan, &csi->csi_chans, list) {
> +		void __iomem *csi_pp_base;
> +
> +		port = csi_chan->ports;
> +		portno = csi_chan->csi_port_num;
> +		csi_pp_base = csi->iomem + CSI_PP_OFFSET(portno >> 1);
> +		port->pixel_parser = csi_pp_base +
> +				     (portno % CSI_PORTS_PER_BRICK) *
> +				     TEGRA210_CSI_PORT_OFFSET;
> +		port->cila = csi_pp_base + TEGRA210_CSI_CIL_OFFSET;
> +		port->cilb = port->cila + TEGRA210_CSI_PORT_OFFSET;
> +		port->tpg = port->pixel_parser + TEGRA210_CSI_TPG_OFFSET;
> +	}
> +
> +	return 0;
> +}
> +
> +const struct tegra_csi_fops csi2_fops = {
> +	.hw_init = csi2_hw_init,
> +	.csi_start_streaming = csi2_start_streaming,
> +	.csi_err_status = csi2_error_status,
> +};
> +EXPORT_SYMBOL(csi2_fops);
> diff --git a/drivers/staging/media/tegra/csi2_fops.h b/drivers/staging/media/tegra/csi2_fops.h
> new file mode 100644
> index 000000000000..cf22a28ceb1f
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi2_fops.h
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __CSI2_H__
> +#define __CSI2_H__
> +
> +#define	TEGRA210_TPG_CLOCK		594000000
> +#define	TEGRA210_CSI_CIL_CLK_MAX	102000000
> +#define TEGRA210_CSI_BRICKS_MAX		3
> +
> +extern const struct tegra_csi_fops csi2_fops;
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
> new file mode 100644
> index 000000000000..740806121e6b
> --- /dev/null
> +++ b/drivers/staging/media/tegra/host1x-video.c
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/host1x.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "host1x-video.h"
> +
> +static int host1x_video_probe(struct host1x_device *dev)
> +{
> +	struct tegra_camera *cam;
> +	int ret;
> +
> +	cam = devm_kzalloc(&dev->dev, sizeof(*cam), GFP_KERNEL);
> +	if (!cam)
> +		return -ENOMEM;
> +
> +	cam->dev = get_device(&dev->dev);
> +	cam->media_dev.dev = cam->dev;
> +	strscpy(cam->media_dev.model, "NVIDIA Tegra Video Input Device",
> +		sizeof(cam->media_dev.model));
> +	cam->media_dev.hw_revision = 3;

Where does this come from?

> +
> +	media_device_init(&cam->media_dev);
> +	ret = media_device_register(&cam->media_dev);
> +	if (ret < 0) {
> +		dev_err(cam->dev, "failed to register media device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	cam->v4l2_dev.mdev = &cam->media_dev;
> +	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
> +	if (ret < 0) {
> +		dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
> +		goto register_error;
> +	}
> +
> +	dev_set_drvdata(&dev->dev, cam);
> +
> +	ret = host1x_device_init(dev);
> +	if (ret < 0)
> +		goto dev_exit;
> +
> +	return 0;
> +
> +dev_exit:
> +	host1x_device_exit(dev);

There should be no need to call host1x_device_exit() when
host1x_device_init() failed because the latter already takes care of
undoing whatever it did already.

> +	v4l2_device_unregister(&cam->v4l2_dev);
> +register_error:
> +	media_device_unregister(&cam->media_dev);
> +	media_device_cleanup(&cam->media_dev);
> +
> +	return ret;
> +}
> +
> +static int host1x_video_remove(struct host1x_device *dev)
> +{
> +	struct tegra_camera *cam = dev_get_drvdata(&dev->dev);
> +
> +	host1x_device_exit(dev);
> +	v4l2_device_unregister(&cam->v4l2_dev);
> +	media_device_unregister(&cam->media_dev);
> +	media_device_cleanup(&cam->media_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id host1x_video_subdevs[] = {
> +	{ .compatible = "nvidia,tegra210-csi", },
> +	{ .compatible = "nvidia,tegra210-vi", },
> +	{ }
> +};
> +
> +static struct host1x_driver host1x_video_driver = {
> +	.driver = {
> +		.name = "host1x_video",

We typically use - instead of _ in names. This helps making access to
sysfs or debugfs consistent across drivers.

> +	},
> +	.probe = host1x_video_probe,
> +	.remove = host1x_video_remove,
> +	.subdevs = host1x_video_subdevs,
> +};
> +
> +static struct platform_driver * const drivers[] = {
> +	&tegra_csi_driver,
> +	&tegra_vi_driver,
> +};
> +
> +static int __init host1x_video_init(void)
> +{
> +	int err;
> +
> +	err = host1x_driver_register(&host1x_video_driver);
> +	if (err < 0)
> +		return err;
> +
> +	err = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
> +	if (err < 0)
> +		goto unregister_host1x;
> +
> +	return 0;
> +
> +unregister_host1x:
> +	host1x_driver_unregister(&host1x_video_driver);
> +	return err;
> +}
> +module_init(host1x_video_init);
> +
> +static void __exit host1x_video_exit(void)
> +{
> +	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
> +	host1x_driver_unregister(&host1x_video_driver);
> +}
> +module_exit(host1x_video_exit);
> +
> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
> +MODULE_DESCRIPTION("NVIDIA Tegra Host1x Video driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
> new file mode 100644
> index 000000000000..84d28e6f4362
> --- /dev/null
> +++ b/drivers/staging/media/tegra/host1x-video.h
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef HOST1X_VIDEO_H
> +#define HOST1X_VIDEO_H 1
> +
> +#include <linux/host1x.h>
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#include "tegra-vi.h"
> +#include "csi.h"
> +
> +struct tegra_camera {

Nit: "camera" seems like a suboptimal choice because usually VI will
consume data from multiple cameras. Maybe something like "tegra_video"
would be a better name?

> +	struct v4l2_device v4l2_dev;
> +	struct media_device media_dev;
> +	struct device *dev;
> +	struct tegra_vi *vi;
> +	struct tegra_csi_device *csi;
> +};
> +
> +extern struct platform_driver tegra_vi_driver;
> +extern struct platform_driver tegra_csi_driver;
> +
> +#endif /* HOST1X_VIDEO_H */
[...]
> diff --git a/drivers/staging/media/tegra/tegra-channel.c b/drivers/staging/media/tegra/tegra-channel.c
> new file mode 100644
> index 000000000000..7561f6fb8748
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-channel.c
> @@ -0,0 +1,628 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/atomic.h>
> +#include <linux/bitmap.h>
> +#include <linux/clk.h>
> +#include <linux/host1x.h>
> +#include <linux/kthread.h>
> +#include <linux/lcm.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fh.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include <soc/tegra/pmc.h>
> +
> +#include "mc_common.h"
> +#include "tegra-vi.h"
> +#include "host1x-video.h"
> +
> +#define MAX_CID_CONTROLS		1
> +
> +static const char *const vi_pattern_strings[] = {
> +	"Black/White Direct Mode",
> +	"Color Patch Mode",
> +};
> +
> +static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct tegra_channel *chan = container_of(ctrl->handler,
> +						  struct tegra_channel,
> +						  ctrl_handler);
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_TEST_PATTERN:
> +		chan->vi->pg_mode = ctrl->val + 1;
> +		dev_info(chan->vi->dev, "TPG mode is set to %s\n",
> +			 vi_pattern_strings[ctrl->val]);

dev_dbg()?

> +		break;
> +
> +	default:
> +		dev_err(chan->vi->dev, "Invalid Tegra video control\n");

That potentially allows an attacker to DoS by flooding the kernel log.
Isn't the -EINVAL below already going to provide enough information to
the caller? If we really want this, perhaps turn it into a dev_dbg() or
even better yet, a rate-limited dev_dbg().

> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
[...]
> diff --git a/drivers/staging/media/tegra/vi2_fops.c b/drivers/staging/media/tegra/vi2_fops.c
[...]
> +const struct tegra_vi_fops vi2_fops = {
> +	.vi_stride_align = vi2_stride_align,
> +	.vi_start_streaming = vi2_channel_start_streaming,
> +	.vi_stop_streaming = vi2_channel_stop_streaming,
> +};
> +EXPORT_SYMBOL(vi2_fops);

There should be no need to export this, unless you want to build this as
a separate module, which I don't think is a good idea.

> diff --git a/drivers/staging/media/tegra/vi2_fops.h b/drivers/staging/media/tegra/vi2_fops.h
> new file mode 100644
> index 000000000000..dcbd3ad4b642
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_fops.h
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __T210_VI_H__
> +#define __T210_VI_H__
> +
> +#define	TEGRA210_CLOCK_VI_MAX			460000000
> +
> +#define	TEGRA_VI_CSI_BASE(x)			(0x100 + (x) * 0x100)
> +
> +extern const struct tegra_vi_fops vi2_fops;
> +
> +#endif

I've been wondering about this. So far we've got two pairs of Tegra210
specific files: vi2_fops.[ch] and csi2_fops.[ch]. Is there any reason
why we couldn't merge those two files into a single file, say,
tegra210.c?

I don't think a header file would be really necessary in that case since
only the tegra210.c file would use any of the definitions in that header
and we coul simply put the "extern" definitions into some central
location to make them available to the main driver.

These files aren't terribly huge, so merging them should result in still
fairly manageable chunks.

> diff --git a/drivers/staging/media/tegra/vi2_formats.h b/drivers/staging/media/tegra/vi2_formats.h
> new file mode 100644
> index 000000000000..416960b1c1f2
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_formats.h
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __VI2_FORMATS_H_
> +#define __VI2_FORMATS_H_
> +
> +#include "tegra-core.h"
> +
> +/*
> + * These go into the TEGRA_VI_CSI_n_IMAGE_DEF registers bits 23:16
> + * Output pixel memory format for the VI channel.
> + */
> +enum tegra_image_format {
> +	TEGRA_IMAGE_FORMAT_T_L8 = 16,
> +
> +	TEGRA_IMAGE_FORMAT_T_R16_I = 32,
> +	TEGRA_IMAGE_FORMAT_T_B5G6R5,
> +	TEGRA_IMAGE_FORMAT_T_R5G6B5,
> +	TEGRA_IMAGE_FORMAT_T_A1B5G5R5,
> +	TEGRA_IMAGE_FORMAT_T_A1R5G5B5,
> +	TEGRA_IMAGE_FORMAT_T_B5G5R5A1,
> +	TEGRA_IMAGE_FORMAT_T_R5G5B5A1,
> +	TEGRA_IMAGE_FORMAT_T_A4B4G4R4,
> +	TEGRA_IMAGE_FORMAT_T_A4R4G4B4,
> +	TEGRA_IMAGE_FORMAT_T_B4G4R4A4,
> +	TEGRA_IMAGE_FORMAT_T_R4G4B4A4,
> +
> +	TEGRA_IMAGE_FORMAT_T_A8B8G8R8 = 64,
> +	TEGRA_IMAGE_FORMAT_T_A8R8G8B8,
> +	TEGRA_IMAGE_FORMAT_T_B8G8R8A8,
> +	TEGRA_IMAGE_FORMAT_T_R8G8B8A8,
> +	TEGRA_IMAGE_FORMAT_T_A2B10G10R10,
> +	TEGRA_IMAGE_FORMAT_T_A2R10G10B10,
> +	TEGRA_IMAGE_FORMAT_T_B10G10R10A2,
> +	TEGRA_IMAGE_FORMAT_T_R10G10B10A2,
> +
> +	TEGRA_IMAGE_FORMAT_T_A8Y8U8V8 = 193,
> +	TEGRA_IMAGE_FORMAT_T_V8U8Y8A8,
> +
> +	TEGRA_IMAGE_FORMAT_T_A2Y10U10V10 = 197,
> +	TEGRA_IMAGE_FORMAT_T_V10U10Y10A2,
> +	TEGRA_IMAGE_FORMAT_T_Y8_U8__Y8_V8,
> +	TEGRA_IMAGE_FORMAT_T_Y8_V8__Y8_U8,
> +	TEGRA_IMAGE_FORMAT_T_U8_Y8__V8_Y8,
> +	TEGRA_IMAGE_FORMAT_T_V8_Y8__U8_Y8,
> +
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N444 = 224,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N444,
> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N444,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N422,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N422,
> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N422,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N420,
> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N420,
> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N420,
> +	TEGRA_IMAGE_FORMAT_T_X2LC10LB10LA10,
> +	TEGRA_IMAGE_FORMAT_T_A2R6R6R6R6R6,
> +};
> +
> +static const struct tegra_video_format vi2_video_formats[] = {
> +	/* RAW 8 */
> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SRGGB8_1X8, 1, 1, T_L8,
> +			   RAW8, SRGGB8, "RGRG.. GBGB.."),
> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SGRBG8_1X8, 1, 1, T_L8,
> +			   RAW8, SGRBG8, "GRGR.. BGBG.."),
> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SGBRG8_1X8, 1, 1, T_L8,
> +			   RAW8, SGBRG8, "GBGB.. RGRG.."),
> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SBGGR8_1X8, 1, 1, T_L8,
> +			   RAW8, SBGGR8, "BGBG.. GRGR.."),
> +
> +	/* RAW 10 */
> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SRGGB10_1X10, 2, 1, T_R16_I,
> +			   RAW10, SRGGB10, "RGRG.. GBGB.."),
> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SGRBG10_1X10, 2, 1, T_R16_I,
> +			   RAW10, SGRBG10, "GRGR.. BGBG.."),
> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SGBRG10_1X10, 2, 1, T_R16_I,
> +			   RAW10, SGBRG10, "GBGB.. RGRG.."),
> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SBGGR10_1X10, 2, 1, T_R16_I,
> +			   RAW10, SBGGR10, "BGBG.. GRGR.."),
> +
> +	/* RAW 12 */
> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SRGGB12_1X12, 2, 1, T_R16_I,
> +			   RAW12, SRGGB12, "RGRG.. GBGB.."),
> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SGRBG12_1X12, 2, 1, T_R16_I,
> +			   RAW12, SGRBG12, "GRGR.. BGBG.."),
> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SGBRG12_1X12, 2, 1, T_R16_I,
> +			   RAW12, SGBRG12, "GBGB.. RGRG.."),
> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SBGGR12_1X12, 2, 1, T_R16_I,
> +			   RAW12, SBGGR12, "BGBG.. GRGR.."),
> +
> +	/* RGB888 */
> +	TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X24, 4, 1, T_A8R8G8B8,
> +			   RGB888, ABGR32, "BGRA-8-8-8-8"),
> +	TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X32_PADHI, 4, 1, T_A8B8G8R8,
> +			   RGB888, RGB32, "RGB-8-8-8-8"),
> +
> +	/* YUV422 */
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 2, 1, T_U8_Y8__V8_Y8,
> +			   YUV422_8, UYVY, "YUV 4:2:2"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_1X16, 2, 1, T_V8_Y8__U8_Y8,
> +			   YUV422_8, VYUY, "YUV 4:2:2"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_1X16, 2, 1, T_Y8_U8__Y8_V8,
> +			   YUV422_8, YUYV, "YUV 4:2:2"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_1X16, 2, 1, T_Y8_V8__Y8_U8,
> +			   YUV422_8, YVYU, "YUV 4:2:2"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 1, 1, T_Y8__V8U8_N422,
> +			   YUV422_8, NV16, "NV16"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_2X8, 2, 1, T_U8_Y8__V8_Y8,
> +			   YUV422_8, UYVY, "YUV 4:2:2 UYVY"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_2X8, 2, 1, T_V8_Y8__U8_Y8,
> +			   YUV422_8, VYUY, "YUV 4:2:2 VYUY"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_2X8, 2, 1, T_Y8_U8__Y8_V8,
> +			   YUV422_8, YUYV, "YUV 4:2:2 YUYV"),
> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_2X8, 2, 1, T_Y8_V8__Y8_U8,
> +			   YUV422_8, YVYU, "YUV 4:2:2 YVYU"),
> +};

Does this table perhaps also belong in tegra210.c?

> +#endif
> diff --git a/drivers/staging/media/tegra/vi2_registers.h b/drivers/staging/media/tegra/vi2_registers.h
> new file mode 100644
> index 000000000000..c54a6a3aa1c4
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_registers.h
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __REGISTERS_H__
> +#define __REGISTERS_H__
> +
> +#define	TEGRA_CLOCK_VI_MAX				793600000
> +#define	TEGRA210_SURFACE_ALIGNMENT			64
> +#define TEGRA210_MAX_CHANNELS				6
> +
> +/* Tegra210 VI registers */

If these are Tegra210-specific, are they accessed outside of Tegra210-
specific code? If not, they may be better located in that new tegra210.c
source file as well. That way it becomes a lot easier to distinguish
between generic, perhaps parameterized, core code and the SoC generation
specific code.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 18:23 ` [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210 Sowjanya Komatineni
  2020-01-28 21:45   ` Helen Koike
  2020-01-29 11:13   ` Thierry Reding
@ 2020-01-29 14:16   ` Hans Verkuil (hansverk)
  2020-01-29 17:27     ` Sowjanya Komatineni
  2020-01-30 14:45   ` Hans Verkuil
  2020-02-05 19:26   ` Stephen Boyd
  4 siblings, 1 reply; 55+ messages in thread
From: Hans Verkuil (hansverk) @ 2020-01-29 14:16 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Hi Sowjanya,

Thank you very much for working on this! Much appreciated.

On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
> Tegra210 contains a powerful Video Input (VI) hardware controller
> which can support up to 6 MIPI CSI camera sensors.
> 
> Each Tegra CSI port can be one-to-one mapped to VI channel and can
> capture from an external camera sensor connected to CSI or from
> built-in test pattern generator.
> 
> Tegra210 supports built-in test pattern generator from CSI to VI.
> 
> This patch adds a V4L2 media controller and capture driver support
> for Tegra210 built-in CSI to VI test pattern generator.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  drivers/staging/media/Kconfig               |   2 +
>  drivers/staging/media/Makefile              |   1 +
>  drivers/staging/media/tegra/Kconfig         |  12 +
>  drivers/staging/media/tegra/Makefile        |  11 +
>  drivers/staging/media/tegra/TODO            |  10 +
>  drivers/staging/media/tegra/csi.h           | 111 +++++
>  drivers/staging/media/tegra/csi2_fops.c     | 335 +++++++++++++++
>  drivers/staging/media/tegra/csi2_fops.h     |  15 +

These three files...

>  drivers/staging/media/tegra/host1x-video.c  | 120 ++++++
>  drivers/staging/media/tegra/host1x-video.h  |  33 ++
>  drivers/staging/media/tegra/mc_common.h     | 131 ++++++

...and this one are a bit too generic. It is good practice to prefix headers
with something unique, e.g. tegra-csi.h etc.

For example, sunxi has sun6i_csi.h and sun4i_csi.h.

>  drivers/staging/media/tegra/tegra-channel.c | 628 ++++++++++++++++++++++++++++
>  drivers/staging/media/tegra/tegra-core.c    | 111 +++++
>  drivers/staging/media/tegra/tegra-core.h    | 125 ++++++
>  drivers/staging/media/tegra/tegra-csi.c     | 380 +++++++++++++++++
>  drivers/staging/media/tegra/tegra-vi.c      | 351 ++++++++++++++++
>  drivers/staging/media/tegra/tegra-vi.h      | 101 +++++
>  drivers/staging/media/tegra/vi2_fops.c      | 364 ++++++++++++++++
>  drivers/staging/media/tegra/vi2_fops.h      |  15 +
>  drivers/staging/media/tegra/vi2_formats.h   | 119 ++++++
>  drivers/staging/media/tegra/vi2_registers.h | 194 +++++++++
>  21 files changed, 3169 insertions(+)
>  create mode 100644 drivers/staging/media/tegra/Kconfig
>  create mode 100644 drivers/staging/media/tegra/Makefile
>  create mode 100644 drivers/staging/media/tegra/TODO
>  create mode 100644 drivers/staging/media/tegra/csi.h
>  create mode 100644 drivers/staging/media/tegra/csi2_fops.c
>  create mode 100644 drivers/staging/media/tegra/csi2_fops.h
>  create mode 100644 drivers/staging/media/tegra/host1x-video.c
>  create mode 100644 drivers/staging/media/tegra/host1x-video.h
>  create mode 100644 drivers/staging/media/tegra/mc_common.h
>  create mode 100644 drivers/staging/media/tegra/tegra-channel.c
>  create mode 100644 drivers/staging/media/tegra/tegra-core.c
>  create mode 100644 drivers/staging/media/tegra/tegra-core.h
>  create mode 100644 drivers/staging/media/tegra/tegra-csi.c
>  create mode 100644 drivers/staging/media/tegra/tegra-vi.c
>  create mode 100644 drivers/staging/media/tegra/tegra-vi.h
>  create mode 100644 drivers/staging/media/tegra/vi2_fops.c
>  create mode 100644 drivers/staging/media/tegra/vi2_fops.h
>  create mode 100644 drivers/staging/media/tegra/vi2_formats.h
>  create mode 100644 drivers/staging/media/tegra/vi2_registers.h
> 
> diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
> index c394abffea86..e367030d4407 100644
> --- a/drivers/staging/media/Kconfig
> +++ b/drivers/staging/media/Kconfig
> @@ -34,6 +34,8 @@ source "drivers/staging/media/sunxi/Kconfig"
>  
>  source "drivers/staging/media/tegra-vde/Kconfig"
>  
> +source "drivers/staging/media/tegra/Kconfig"
> +
>  source "drivers/staging/media/ipu3/Kconfig"
>  
>  source "drivers/staging/media/soc_camera/Kconfig"
> diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
> index ea9fce8014bb..67a22ac709e8 100644
> --- a/drivers/staging/media/Makefile
> +++ b/drivers/staging/media/Makefile
> @@ -10,3 +10,4 @@ obj-$(CONFIG_VIDEO_IPU3_IMGU)	+= ipu3/
>  obj-$(CONFIG_SOC_CAMERA)	+= soc_camera/
>  obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0)	+= phy-rockchip-dphy-rx0/
>  obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1)	+= rkisp1/
> +obj-$(CONFIG_VIDEO_TEGRA)	+= tegra/
> diff --git a/drivers/staging/media/tegra/Kconfig b/drivers/staging/media/tegra/Kconfig
> new file mode 100644
> index 000000000000..443b99f2e2c9
> --- /dev/null
> +++ b/drivers/staging/media/tegra/Kconfig
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config VIDEO_TEGRA
> +	tristate "NVIDIA Tegra VI driver"
> +	depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
> +	depends on COMMON_CLK
> +	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> +	depends on MEDIA_CONTROLLER
> +	select TEGRA_HOST1X
> +	select VIDEOBUF2_DMA_CONTIG
> +	select V4L2_FWNODE
> +	help
> +	  Say yes here to enable support for Tegra video input hardware
> diff --git a/drivers/staging/media/tegra/Makefile b/drivers/staging/media/tegra/Makefile
> new file mode 100644
> index 000000000000..003d23444d49
> --- /dev/null
> +++ b/drivers/staging/media/tegra/Makefile
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: GPL-2.0
> +tegra-video-y := \
> +		host1x-video.o \
> +		tegra-channel.o \
> +		tegra-core.o \
> +		csi2_fops.o \
> +		vi2_fops.o \
> +		tegra-vi.o \
> +		tegra-csi.o
> +
> +obj-$(CONFIG_VIDEO_TEGRA) += tegra-video.o
> diff --git a/drivers/staging/media/tegra/TODO b/drivers/staging/media/tegra/TODO
> new file mode 100644
> index 000000000000..d7d64b13535e
> --- /dev/null
> +++ b/drivers/staging/media/tegra/TODO
> @@ -0,0 +1,10 @@
> +TODO list
> +* Currently driver supports Tegra build-in TPG Only with direct media links from CSI to VI.
> +  Update the driver to do TPG Vs Sensor media links based on the kernel config CONFIG_VIDEO_TEGRA_TPG.
> +* Add real camera sensor capture support
> +* Add RAW10 packed video format support to Tegra210 video formats
> +* Add Tegra CSI MIPI pads calibration
> +* Add MIPI clock Settle time computation based on the data rate
> +* Add support for Ganged mode
> +* Make sure v4l2-compliance tests pass with all of the above implementations.
> +* Add SMMU support for VI to avoid cma_alloc failures with higher resolutions of some video formats.
> diff --git a/drivers/staging/media/tegra/csi.h b/drivers/staging/media/tegra/csi.h
> new file mode 100644
> index 000000000000..81cdda4b6bdd
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi.h
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __CSI_H_
> +#define __CSI_H_
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +/*
> + * Each CSI brick supports max of 4 lanes that can be used as either
> + * one x4 port using both CILA and CILB partitions of a CSI brick or can
> + * be used as two x2 ports with one x2 from CILA and the other x2 from
> + * CILB.
> + */
> +#define CSI_LANES_PER_BRICK	4
> +#define CSI_PORTS_PER_BRICK	2
> +
> +/* each CSI channel can have one sink and one source pads */
> +#define TEGRA_CSI_PADS_NUM	2
> +
> +enum tegra_csi_cil_port {
> +	PORT_A = 0,
> +	PORT_B,
> +};
> +
> +enum tegra_csi_block {
> +	CSI_CIL_AB = 0,
> +	CSI_CIL_CD,
> +	CSI_CIL_EF,
> +};
> +
> +struct tegra_csi_device;
> +
> +struct tegra_csi_port {
> +	void __iomem *pixel_parser;
> +	void __iomem *cila;
> +	void __iomem *cilb;
> +	void __iomem *tpg;
> +
> +	/* one pair of sink/source pad has one format */
> +	struct v4l2_mbus_framefmt format;
> +	unsigned int lanes;
> +};
> +
> +struct tegra_csi_channel {
> +	struct list_head list;
> +	struct v4l2_subdev subdev;
> +	struct media_pad pads[TEGRA_CSI_PADS_NUM];
> +	struct device_node *of_node;
> +	struct tegra_csi_device *csi;
> +	struct tegra_csi_port *ports;
> +	unsigned int numlanes;
> +	unsigned int numpads;
> +	u8 csi_port_num;
> +
> +	/* protects csi channel ports format fields */
> +	struct mutex format_lock;
> +};
> +
> +struct tegra_csi_soc_data {
> +	const struct tegra_csi_fops *csi_fops;
> +	unsigned int cil_max_clk_hz;
> +	unsigned int num_tpg_channels;
> +};
> +
> +/**
> + * struct tegra_csi_device - NVIDIA Tegra CSI device structure
> + * @dev: device struct
> + * @client: host1x_client struct
> + *
> + * @iomem: register base
> + * @csi_clk: clock for CSI
> + * @cilab_clk: clock for CIL AB
> + * @cilcd_clk: clock for CIL CD
> + * @cilef_clk: clock for CIL EF
> + * @tpg_clk: clock for internal CSI TPG logic
> + *
> + * @soc_data: pointer to SoC data structure
> + * @fops: csi operations
> + *
> + * @channels: list of CSI channels
> + */
> +struct tegra_csi_device {
> +	struct device *dev;
> +	struct host1x_client client;
> +
> +	void __iomem *iomem;
> +	struct clk *csi_clk;
> +	struct clk *cilab_clk;
> +	struct clk *cilcd_clk;
> +	struct clk *cilef_clk;
> +	struct clk *tpg_clk;
> +	atomic_t clk_refcnt;
> +
> +	const struct tegra_csi_soc_data *soc_data;
> +	const struct tegra_csi_fops *fops;
> +
> +	struct list_head csi_chans;
> +};
> +
> +void tegra_csi_error_status(struct v4l2_subdev *subdev);
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/csi2_fops.c b/drivers/staging/media/tegra/csi2_fops.c
> new file mode 100644
> index 000000000000..5f2f7bd3ae50
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi2_fops.c
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk/tegra.h>
> +#include <linux/delay.h>
> +
> +#include "vi2_registers.h"
> +#include "mc_common.h"
> +#include "csi2_fops.h"
> +#include "csi.h"
> +
> +/* CSI block registers offset */
> +#define TEGRA210_CSI_PORT_OFFSET		0x34
> +/* CSI CIL parition registers offset */
> +#define TEGRA210_CSI_CIL_OFFSET			0x0f4
> +/* CSI TPG registers offset */
> +#define TEGRA210_CSI_TPG_OFFSET			0x18c
> +
> +#define CSI_PP_OFFSET(block)	((block) * 0x800)
> +
> +static void csi_write(struct tegra_csi_channel *chan, u8 block,
> +		      unsigned int addr, u32 val)
> +{
> +	void __iomem *csi_pp_base;
> +
> +	csi_pp_base = chan->csi->iomem + CSI_PP_OFFSET(block);
> +	writel(val, csi_pp_base + addr);
> +}
> +
> +/* Pixel parser registers accessors */
> +static void pp_write(struct tegra_csi_port *port, u32 addr, u32 val)
> +{
> +	writel(val, port->pixel_parser + addr);
> +}
> +
> +static u32 pp_read(struct tegra_csi_port *port, u32 addr)
> +{
> +	return readl(port->pixel_parser + addr);
> +}
> +
> +/* CSI CIL A/B port registers accessors */
> +static void cil_write(struct tegra_csi_port *port, u8 port_id,
> +		      u32 addr, u32 val)
> +{
> +	if (port_id & PORT_B)
> +		writel(val, port->cilb + addr);
> +	else
> +		writel(val, port->cila + addr);
> +}
> +
> +static u32 cil_read(struct tegra_csi_port *port, u8 port_id,
> +		    u32 addr)
> +{
> +	if (port_id & PORT_B)
> +		return readl(port->cilb + addr);
> +	else
> +		return readl(port->cila + addr);
> +}
> +
> +/* Test pattern generator registers accessor */
> +static void tpg_write(struct tegra_csi_port *port, unsigned int addr, u32 val)
> +{
> +	writel(val, port->tpg + addr);
> +}
> +
> +static void csi2_error_status(struct tegra_csi_channel *csi_chan)
> +{
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	unsigned int port_num = csi_chan->csi_port_num;
> +	struct tegra_csi_port *port = csi_chan->ports;
> +	u32 val;
> +
> +	val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
> +	dev_err(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n", val);
> +
> +	val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
> +	dev_err(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
> +
> +	val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
> +	dev_err(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
> +}
> +
> +static int csi2_start_streaming(struct tegra_csi_channel *csi_chan,
> +				u8 pg_mode, int enable)
> +{
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	unsigned int port_num = csi_chan->csi_port_num;
> +	unsigned int block = port_num >> 1;
> +	struct tegra_csi_port *port = csi_chan->ports;
> +	unsigned int cil_max_freq = csi->soc_data->cil_max_clk_hz;
> +	struct clk *cil_clk;
> +	int ret;
> +
> +	if (block == CSI_CIL_AB)
> +		cil_clk = csi->cilab_clk;
> +	else if (block == CSI_CIL_CD)
> +		cil_clk = csi->cilcd_clk;
> +	else
> +		cil_clk = csi->cilef_clk;
> +
> +	if (enable) {
> +		ret = clk_set_rate(cil_clk, cil_max_freq);
> +		if (ret)
> +			dev_err(csi->dev,
> +				"failed to set cil clk rate, err: %d\n", ret);
> +
> +		/* enable CIL clock on first open */
> +		if (atomic_add_return(1, &csi->clk_refcnt) == 1) {
> +			ret = clk_prepare_enable(cil_clk);
> +			if (ret) {
> +				dev_err(csi->dev,
> +					"failed to enable cil clk, err: %d\n",
> +					ret);
> +				return ret;
> +			}
> +		}
> +
> +		/*
> +		 * On Tegra210, TPG internal logic uses PLLD out along with
> +		 * the CIL clock.
> +		 * So, enable TPG clock during TPG mode streaming.
> +		 */
> +		if (pg_mode) {
> +			ret = clk_set_rate(csi->tpg_clk, TEGRA210_TPG_CLOCK);
> +			if (ret)
> +				dev_err(csi->dev,
> +					"failed to set tpg clk rate\n");
> +
> +			ret = clk_prepare_enable(csi->tpg_clk);
> +			if (ret) {
> +				dev_err(csi->dev,
> +					"failed to enable tpg clk, err: %d\n",
> +					ret);
> +				return ret;
> +			}
> +		}
> +
> +		csi_write(csi_chan, block, TEGRA_CSI_CLKEN_OVERRIDE, 0);
> +
> +		/* clean up status */
> +		pp_write(port, TEGRA_CSI_PIXEL_PARSER_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CILX_STATUS, 0xFFFFFFFF);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
> +
> +		/* CIL PHY registers setup */
> +		cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
> +		cil_write(port, port_num, TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
> +
> +		/*
> +		 * The CSI unit provides for connection of up to six cameras in
> +		 * the system and is organized as three identical instances of
> +		 * two MIPI support blocks, each with a separate 4-lane
> +		 * interface that can be configured as a single camera with 4
> +		 * lanes or as a dual camera with 2 lanes available for each
> +		 * camera.
> +		 */
> +		if (port->lanes == 4) {
> +			cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0,
> +				  BRICK_CLOCK_A_4X);
> +
> +			cil_write(port, (port_num + 1),
> +				  TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
> +
> +			cil_write(port, (port_num + 1),
> +				  TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
> +
> +			cil_write(port, (port_num + 1),
> +				  TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
> +
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_ENABLE);
> +		} else {
> +			u32 val = ((port_num & 1) == PORT_A) ?
> +				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_NOP :
> +				  CSI_B_PHY_CIL_ENABLE | CSI_A_PHY_CIL_NOP;
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  val);
> +		}
> +
> +		/* CSI pixel parser registers setup */
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_RST);
> +		pp_write(port, TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK, 0x0);
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL0,
> +			 CSI_PP_PACKET_HEADER_SENT |
> +			 CSI_PP_DATA_IDENTIFIER_ENABLE |
> +			 CSI_PP_WORD_COUNT_SELECT_HEADER |
> +			 CSI_PP_CRC_CHECK_ENABLE |  CSI_PP_WC_CHECK |
> +			 CSI_PP_OUTPUT_FORMAT_STORE |
> +			 CSI_PP_HEADER_EC_DISABLE | CSI_PPA_PAD_FRAME_NOPAD |
> +			 (port_num & 1));
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL1,
> +			 (0x1 << CSI_PP_TOP_FIELD_FRAME_OFFSET) |
> +			 (0x1 << CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET));
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_GAP,
> +			 0x14 << PP_FRAME_MIN_GAP_OFFSET);
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME, 0x0);
> +		pp_write(port, TEGRA_CSI_INPUT_STREAM_CONTROL,
> +			 (0x3f << CSI_SKIP_PACKET_THRESHOLD_OFFSET) |
> +			 (port->lanes - 1));
> +
> +		/* TPG setup */
> +		if (pg_mode) {
> +			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
> +				  ((pg_mode - 1) << PG_MODE_OFFSET) |
> +				  PG_ENABLE);
> +			tpg_write(port, TEGRA_CSI_PG_PHASE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_RED_FREQ,
> +				  (0x10 << PG_RED_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_RED_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_RED_FREQ_RATE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ,
> +				  (0x10 << PG_GREEN_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_GREEN_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ_RATE, 0x0);
> +			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ,
> +				  (0x10 << PG_BLUE_VERT_INIT_FREQ_OFFSET) |
> +				  (0x10 << PG_BLUE_HOR_INIT_FREQ_OFFSET));
> +			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ_RATE, 0x0);
> +		}
> +
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_ENABLE);
> +	} else {
> +		u32 val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
> +
> +		dev_dbg(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n",
> +			val);
> +
> +		val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
> +		dev_dbg(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
> +
> +		val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
> +		dev_dbg(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
> +
> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> +			 CSI_PP_DISABLE);
> +
> +		if (pg_mode) {
> +			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
> +				  ((pg_mode - 1) << PG_MODE_OFFSET) |
> +				  PG_DISABLE);
> +			clk_disable_unprepare(csi->tpg_clk);
> +		}
> +
> +		if (port->lanes == 4) {
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  CSI_A_PHY_CIL_DISABLE |
> +				  CSI_B_PHY_CIL_DISABLE);
> +
> +		} else {
> +			u32 val = ((port_num & 1) == PORT_A) ?
> +				  CSI_A_PHY_CIL_DISABLE | CSI_B_PHY_CIL_NOP :
> +				  CSI_B_PHY_CIL_DISABLE | CSI_A_PHY_CIL_NOP;
> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> +				  val);
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int csi2_hw_init(struct tegra_csi_device *csi)
> +{
> +	struct tegra_csi_channel *csi_chan;
> +	struct tegra_csi_port *port;
> +	u8 portno;
> +	int ret;
> +
> +	csi->cilab_clk = devm_clk_get(csi->dev, "cilab");
> +	if (IS_ERR(csi->cilab_clk)) {
> +		dev_err(csi->dev, "Failed to get cilab clock\n");
> +		return PTR_ERR(csi->cilab_clk);
> +	}
> +
> +	csi->cilcd_clk = devm_clk_get(csi->dev, "cilcd");
> +	if (IS_ERR(csi->cilcd_clk)) {
> +		dev_err(csi->dev, "Failed to get cilcd clock\n");
> +		return PTR_ERR(csi->cilcd_clk);
> +	}
> +
> +	csi->cilef_clk = devm_clk_get(csi->dev, "cile");
> +	if (IS_ERR(csi->cilef_clk)) {
> +		dev_err(csi->dev, "Failed to get cile clock\n");
> +		return PTR_ERR(csi->cilef_clk);
> +	}
> +
> +	csi->tpg_clk = devm_clk_get(csi->dev, "csi_tpg");
> +	if (IS_ERR(csi->tpg_clk)) {
> +		dev_err(csi->dev, "Failed to get csi_tpg clock\n");
> +		return PTR_ERR(csi->tpg_clk);
> +	}
> +
> +	csi->csi_clk = devm_clk_get(csi->dev, "csi");
> +	if (IS_ERR(csi->csi_clk)) {
> +		dev_err(csi->dev, "Failed to get csi clock\n");
> +		return PTR_ERR(csi->csi_clk);
> +	}
> +
> +	ret = clk_prepare_enable(csi->csi_clk);
> +	if (ret) {
> +		dev_err(csi->dev, "Failed to enable csi clk, err: %d\n", ret);
> +		return ret;
> +	}
> +
> +	list_for_each_entry(csi_chan, &csi->csi_chans, list) {
> +		void __iomem *csi_pp_base;
> +
> +		port = csi_chan->ports;
> +		portno = csi_chan->csi_port_num;
> +		csi_pp_base = csi->iomem + CSI_PP_OFFSET(portno >> 1);
> +		port->pixel_parser = csi_pp_base +
> +				     (portno % CSI_PORTS_PER_BRICK) *
> +				     TEGRA210_CSI_PORT_OFFSET;
> +		port->cila = csi_pp_base + TEGRA210_CSI_CIL_OFFSET;
> +		port->cilb = port->cila + TEGRA210_CSI_PORT_OFFSET;
> +		port->tpg = port->pixel_parser + TEGRA210_CSI_TPG_OFFSET;
> +	}
> +
> +	return 0;
> +}
> +
> +const struct tegra_csi_fops csi2_fops = {
> +	.hw_init = csi2_hw_init,
> +	.csi_start_streaming = csi2_start_streaming,
> +	.csi_err_status = csi2_error_status,
> +};
> +EXPORT_SYMBOL(csi2_fops);
> diff --git a/drivers/staging/media/tegra/csi2_fops.h b/drivers/staging/media/tegra/csi2_fops.h
> new file mode 100644
> index 000000000000..cf22a28ceb1f
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi2_fops.h
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __CSI2_H__
> +#define __CSI2_H__
> +
> +#define	TEGRA210_TPG_CLOCK		594000000
> +#define	TEGRA210_CSI_CIL_CLK_MAX	102000000
> +#define TEGRA210_CSI_BRICKS_MAX		3
> +
> +extern const struct tegra_csi_fops csi2_fops;
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
> new file mode 100644
> index 000000000000..740806121e6b
> --- /dev/null
> +++ b/drivers/staging/media/tegra/host1x-video.c
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/host1x.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "host1x-video.h"
> +
> +static int host1x_video_probe(struct host1x_device *dev)
> +{
> +	struct tegra_camera *cam;
> +	int ret;
> +
> +	cam = devm_kzalloc(&dev->dev, sizeof(*cam), GFP_KERNEL);
> +	if (!cam)
> +		return -ENOMEM;
> +
> +	cam->dev = get_device(&dev->dev);
> +	cam->media_dev.dev = cam->dev;
> +	strscpy(cam->media_dev.model, "NVIDIA Tegra Video Input Device",
> +		sizeof(cam->media_dev.model));
> +	cam->media_dev.hw_revision = 3;
> +
> +	media_device_init(&cam->media_dev);
> +	ret = media_device_register(&cam->media_dev);
> +	if (ret < 0) {
> +		dev_err(cam->dev, "failed to register media device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	cam->v4l2_dev.mdev = &cam->media_dev;
> +	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
> +	if (ret < 0) {
> +		dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
> +		goto register_error;
> +	}
> +
> +	dev_set_drvdata(&dev->dev, cam);
> +
> +	ret = host1x_device_init(dev);
> +	if (ret < 0)
> +		goto dev_exit;
> +
> +	return 0;
> +
> +dev_exit:
> +	host1x_device_exit(dev);
> +	v4l2_device_unregister(&cam->v4l2_dev);
> +register_error:
> +	media_device_unregister(&cam->media_dev);
> +	media_device_cleanup(&cam->media_dev);
> +
> +	return ret;
> +}
> +
> +static int host1x_video_remove(struct host1x_device *dev)
> +{
> +	struct tegra_camera *cam = dev_get_drvdata(&dev->dev);
> +
> +	host1x_device_exit(dev);
> +	v4l2_device_unregister(&cam->v4l2_dev);
> +	media_device_unregister(&cam->media_dev);
> +	media_device_cleanup(&cam->media_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id host1x_video_subdevs[] = {
> +	{ .compatible = "nvidia,tegra210-csi", },
> +	{ .compatible = "nvidia,tegra210-vi", },
> +	{ }
> +};
> +
> +static struct host1x_driver host1x_video_driver = {
> +	.driver = {
> +		.name = "host1x_video",
> +	},
> +	.probe = host1x_video_probe,
> +	.remove = host1x_video_remove,
> +	.subdevs = host1x_video_subdevs,
> +};
> +
> +static struct platform_driver * const drivers[] = {
> +	&tegra_csi_driver,
> +	&tegra_vi_driver,
> +};
> +
> +static int __init host1x_video_init(void)
> +{
> +	int err;
> +
> +	err = host1x_driver_register(&host1x_video_driver);
> +	if (err < 0)
> +		return err;
> +
> +	err = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
> +	if (err < 0)
> +		goto unregister_host1x;
> +
> +	return 0;
> +
> +unregister_host1x:
> +	host1x_driver_unregister(&host1x_video_driver);
> +	return err;
> +}
> +module_init(host1x_video_init);
> +
> +static void __exit host1x_video_exit(void)
> +{
> +	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
> +	host1x_driver_unregister(&host1x_video_driver);
> +}
> +module_exit(host1x_video_exit);
> +
> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
> +MODULE_DESCRIPTION("NVIDIA Tegra Host1x Video driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
> new file mode 100644
> index 000000000000..84d28e6f4362
> --- /dev/null
> +++ b/drivers/staging/media/tegra/host1x-video.h
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef HOST1X_VIDEO_H
> +#define HOST1X_VIDEO_H 1
> +
> +#include <linux/host1x.h>
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#include "tegra-vi.h"
> +#include "csi.h"
> +
> +struct tegra_camera {
> +	struct v4l2_device v4l2_dev;
> +	struct media_device media_dev;
> +	struct device *dev;
> +	struct tegra_vi *vi;
> +	struct tegra_csi_device *csi;
> +};
> +
> +extern struct platform_driver tegra_vi_driver;
> +extern struct platform_driver tegra_csi_driver;
> +
> +#endif /* HOST1X_VIDEO_H */
> diff --git a/drivers/staging/media/tegra/mc_common.h b/drivers/staging/media/tegra/mc_common.h
> new file mode 100644
> index 000000000000..9e88f3295ef4
> --- /dev/null
> +++ b/drivers/staging/media/tegra/mc_common.h
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __MC_COMMON_H_
> +#define __MC_COMMON_H_
> +
> +#include <linux/host1x.h>
> +#include <linux/mutex.h>
> +#include <linux/spinlock.h>
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#include "tegra-core.h"
> +#include "tegra-vi.h"
> +#include "csi.h"
> +
> +#define MAX_FORMAT_NUM	64
> +
> +struct tegra_csi_fops {
> +	int (*hw_init)(struct tegra_csi_device *csi);
> +	int (*csi_start_streaming)(struct tegra_csi_channel *csi_chan,
> +				   u8 pg_mode, int enable);
> +	void (*csi_err_status)(struct tegra_csi_channel *csi_chan);
> +};
> +
> +/**
> + * struct tegra_channel - Tegra video channel
> + * @list: list entry in a composite device dmas list
> + * @video: V4L2 video device associated with the video channel
> + * @video_lock: protects the @format and @queue fields
> + * @pad: media pad for the video device entity
> + *
> + * @vi: composite device DT node port number for the channel
> + *
> + * @sp: host1x syncpoint pointer
> + *
> + * @kthread_capture_start: capture start kthread of this video channel
> + * @start_wait: wait queue used by capture start kthread
> + * @kthread_capture_done: capture done kthread of this video channel
> + * @done_wait: wait queue used by capture done kthread
> + *
> + * @format: active V4L2 pixel format
> + * @fmtinfo: format information corresponding to the active @format
> + * @video_formats: supported video formats
> + * @nformats: supported number of video formats
> + *
> + * @queue: vb2 buffers queue
> + * @sequence: V4L2 buffers sequence number
> + *
> + * @capture: list of queued buffers for capture
> + * @start_lock: protects the capture queued list
> + * @done: list of capture done queued buffers
> + * @done_lock: protects the capture done queue list
> + *
> + * @stride_align: channel buffer stride alignment
> + * @width_align: channel buffer width alignment
> + * @height_align: channel buffer height alignment
> + * @size_align: channel buffer size alignment
> +
> + * @port: CSI port of this video channel
> + *
> + * @ctrl_handler: V4L2 control handler of this video channel
> + * @tpg_fmts_bitmap: a bitmap for supported TPG formats
> + */
> +struct tegra_channel {
> +	struct list_head list;
> +	struct video_device video;
> +	/* protects the @format and @queue fields */
> +	struct mutex video_lock;
> +	struct media_pad pad;
> +
> +	struct tegra_vi *vi;
> +	struct host1x_syncpt *sp;
> +
> +	struct task_struct *kthread_capture_start;
> +	wait_queue_head_t start_wait;
> +	struct task_struct *kthread_capture_done;
> +	wait_queue_head_t done_wait;
> +
> +	struct v4l2_pix_format format;
> +	const struct tegra_video_format *fmtinfo;
> +	const struct tegra_video_format *video_formats;
> +	unsigned int nformats;
> +	struct vb2_queue queue;
> +	u32 sequence;
> +
> +	struct list_head capture;
> +	/* protects the capture queued list */
> +	spinlock_t start_lock;
> +	struct list_head done;
> +	/* protects the capture done queue list */
> +	spinlock_t done_lock;
> +
> +	unsigned int stride_align;
> +	unsigned int width_align;
> +	unsigned int height_align;
> +	unsigned int size_align;
> +	unsigned char port;
> +
> +	struct v4l2_ctrl_handler ctrl_handler;
> +	DECLARE_BITMAP(tpg_fmts_bitmap, MAX_FORMAT_NUM);
> +};
> +
> +#define to_tegra_channel(vdev) \
> +	container_of(vdev, struct tegra_channel, video)
> +
> +const struct tegra_video_format *tegra_core_get_default_format(void);
> +u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
> +				 unsigned int index);
> +int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
> +			       unsigned int offset);
> +const struct tegra_video_format *
> +tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc);
> +
> +int tegra_channel_init(struct tegra_channel *chan);
> +int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan);
> +int tegra_channel_cleanup(struct tegra_channel *chan);
> +int tegra_channel_set_stream(struct tegra_channel *chan, bool on);
> +void tegra_channel_queued_buf_done(struct tegra_channel *chan,
> +				   enum vb2_buffer_state state);
> +int tegra_channel_csi_error_status(struct tegra_channel *chan);
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/tegra-channel.c b/drivers/staging/media/tegra/tegra-channel.c
> new file mode 100644
> index 000000000000..7561f6fb8748
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-channel.c
> @@ -0,0 +1,628 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/atomic.h>
> +#include <linux/bitmap.h>
> +#include <linux/clk.h>
> +#include <linux/host1x.h>
> +#include <linux/kthread.h>
> +#include <linux/lcm.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fh.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include <soc/tegra/pmc.h>
> +
> +#include "mc_common.h"
> +#include "tegra-vi.h"
> +#include "host1x-video.h"
> +
> +#define MAX_CID_CONTROLS		1
> +
> +static const char *const vi_pattern_strings[] = {
> +	"Black/White Direct Mode",
> +	"Color Patch Mode",
> +};
> +
> +static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct tegra_channel *chan = container_of(ctrl->handler,
> +						  struct tegra_channel,
> +						  ctrl_handler);
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_TEST_PATTERN:
> +		chan->vi->pg_mode = ctrl->val + 1;
> +		dev_info(chan->vi->dev, "TPG mode is set to %s\n",
> +			 vi_pattern_strings[ctrl->val]);

There is no need to spam the log with this message.

> +		break;
> +
> +	default:
> +		dev_err(chan->vi->dev, "Invalid Tegra video control\n");

This can be dropped as well. Actually, this should never happen since the
control framework will call this function for valid controls only.

> +		return -EINVAL;

Traditionally the 'default: return -EINVAL;' is kept, just in case we ever
hit this through some regression.

> +	}
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops vi_ctrl_ops = {
> +	.s_ctrl	= vi_s_ctrl,
> +};
> +
> +/*
> + * videobuf2 queue operations
> + */
> +static int tegra_channel_queue_setup(struct vb2_queue *vq,
> +				     unsigned int *nbuffers,
> +				     unsigned int *nplanes,
> +				     unsigned int sizes[],
> +				     struct device *alloc_devs[])
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vq);
> +	unsigned int count = *nbuffers;
> +
> +	if (*nplanes)
> +		return sizes[0] < chan->format.sizeimage ? -EINVAL : 0;
> +
> +	*nplanes = 1;
> +	sizes[0] = chan->format.sizeimage;
> +	alloc_devs[0] = chan->vi->dev;
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_buffer_prepare(struct vb2_buffer *vb)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +	struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
> +	unsigned long size = chan->format.sizeimage;
> +
> +	if (vb2_plane_size(vb, 0) < size) {
> +		v4l2_err(chan->video.v4l2_dev, "buffer too small (%lu < %lu)\n",
> +			 vb2_plane_size(vb, 0), size);
> +		return -EINVAL;
> +	}
> +
> +	vb2_set_plane_payload(vb, 0, size);
> +	buf->chan = chan;
> +	buf->addr = vb2_dma_contig_plane_dma_addr(vb, 0);
> +
> +	return 0;
> +}
> +
> +static void tegra_channel_buffer_queue(struct vb2_buffer *vb)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +	struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
> +
> +	/* put buffer into the capture queue */
> +	spin_lock(&chan->start_lock);
> +	list_add_tail(&buf->queue, &chan->capture);
> +	spin_unlock(&chan->start_lock);
> +
> +	/* wait up kthread for capture */
> +	wake_up_interruptible(&chan->start_wait);
> +}
> +
> +int tegra_channel_csi_error_status(struct tegra_channel *chan)
> +{
> +	struct media_entity *entity;
> +	struct media_pad *pad;
> +	struct v4l2_subdev *subdev;
> +
> +	pad = media_entity_remote_pad(&chan->pad);
> +	if (!pad)
> +		return -ENODEV;
> +
> +	entity = pad->entity;
> +	subdev = media_entity_to_v4l2_subdev(entity);
> +
> +	tegra_csi_error_status(subdev);
> +
> +	return 0;
> +}
> +
> +static struct v4l2_subdev *
> +tegra_channel_get_remote_subdev(struct tegra_channel *chan)
> +{
> +	struct media_pad *pad;
> +	struct v4l2_subdev *subdev;
> +	struct media_entity *entity;
> +
> +	pad = media_entity_remote_pad(&chan->pad);
> +	entity = pad->entity;
> +	subdev = media_entity_to_v4l2_subdev(entity);
> +
> +	return subdev;
> +}
> +
> +int tegra_channel_set_stream(struct tegra_channel *chan, bool on)
> +{
> +	struct v4l2_subdev *subdev;
> +	int ret;
> +
> +	/* stream CSI */
> +	subdev = tegra_channel_get_remote_subdev(chan);
> +	v4l2_set_subdev_hostdata(subdev, chan);
> +	ret = v4l2_subdev_call(subdev, video, s_stream, on);
> +	if (on && ret < 0 && ret != -ENOIOCTLCMD)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +void tegra_channel_queued_buf_done(struct tegra_channel *chan,
> +				   enum vb2_buffer_state state)
> +{
> +	struct tegra_channel_buffer *buf, *nbuf;
> +
> +	spin_lock(&chan->start_lock);
> +	list_for_each_entry_safe(buf, nbuf, &chan->capture, queue) {
> +		vb2_buffer_done(&buf->buf.vb2_buf, state);
> +		list_del(&buf->queue);
> +	}
> +
> +	spin_unlock(&chan->start_lock);
> +}
> +
> +static int tegra_channel_start_streaming(struct vb2_queue *vq, u32 count)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vq);
> +
> +	if (chan->vi->fops->vi_start_streaming)
> +		return chan->vi->fops->vi_start_streaming(vq, count);
> +
> +	return 0;
> +}
> +
> +static void tegra_channel_stop_streaming(struct vb2_queue *vq)
> +{
> +	struct tegra_channel *chan = vb2_get_drv_priv(vq);
> +
> +	if (chan->vi->fops->vi_start_streaming)
> +		chan->vi->fops->vi_stop_streaming(vq);
> +}
> +
> +static const struct vb2_ops tegra_channel_queue_qops = {
> +	.queue_setup = tegra_channel_queue_setup,
> +	.buf_prepare = tegra_channel_buffer_prepare,
> +	.buf_queue = tegra_channel_buffer_queue,
> +	.wait_prepare = vb2_ops_wait_prepare,
> +	.wait_finish = vb2_ops_wait_finish,
> +	.start_streaming = tegra_channel_start_streaming,
> +	.stop_streaming = tegra_channel_stop_streaming,
> +};
> +
> +/*
> + * V4L2 ioctls
> + */
> +static int tegra_channel_querycap(struct file *file, void *fh,
> +				  struct v4l2_capability *cap)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +
> +	cap->device_caps = chan->video.device_caps;
> +	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;

Just drop these two lines. You already set device_caps in struct video_device,
and that's sufficient. The v4l2 core will set these two fields for you
based on the video_device.

> +	strscpy(cap->driver, "tegra-video", sizeof(cap->driver));
> +	strscpy(cap->card, chan->video.name, sizeof(cap->card));
> +	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s:%u",
> +		 dev_name(chan->vi->dev), chan->port);
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_enum_format(struct file *file, void *fh,
> +				     struct v4l2_fmtdesc *f)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +	unsigned int index = 0, i;
> +	unsigned long *fmts_bitmap = chan->tpg_fmts_bitmap;
> +
> +	if (f->index >= bitmap_weight(fmts_bitmap, MAX_FORMAT_NUM))
> +		return -EINVAL;
> +
> +	for (i = 0; i < f->index + 1; i++, index++)
> +		index = find_next_bit(fmts_bitmap, MAX_FORMAT_NUM, index);
> +
> +	f->pixelformat = tegra_core_get_fourcc_by_idx(chan, index - 1);
> +
> +	return 0;
> +}
> +
> +static void
> +tegra_channel_fmt_align(struct tegra_channel *chan,
> +			const struct tegra_frac *bpp,
> +			u32 *width, u32 *height, u32 *bytesperline)
> +{
> +	unsigned int min_width, max_width;
> +	unsigned int min_bpl, max_bpl, bpl;
> +	unsigned int align, fmt_align;
> +	unsigned int temp_width, temp_bpl;
> +	unsigned int numerator, denominator;
> +
> +	denominator = (!bpp->denominator) ? 1 : bpp->denominator;
> +	numerator = (!bpp->numerator) ? 1 : bpp->numerator;
> +	fmt_align = (denominator == 1) ? numerator : 1;
> +	align = lcm(chan->width_align, fmt_align);
> +	bpl = (*width * numerator) / denominator;
> +
> +	if (chan->vi->fops->vi_stride_align)
> +		chan->vi->fops->vi_stride_align(&bpl);
> +
> +	if (!*bytesperline)
> +		*bytesperline = bpl;
> +
> +	/*
> +	 * The transfer alignment requirements are expressed in bytes. Compute
> +	 * the minimum and maximum values, clamp the requested width and convert
> +	 * it back to pixels.
> +	 * use bytesperline to adjust width for applicaton related requriements.
> +	 */
> +	min_width = roundup(TEGRA_MIN_WIDTH, align);
> +	max_width = rounddown(TEGRA_MAX_WIDTH, align);
> +	temp_width = roundup(bpl, align);
> +	*width = (clamp(temp_width, min_width, max_width) * denominator) /
> +			numerator;
> +	*height = clamp(*height, TEGRA_MIN_HEIGHT, TEGRA_MAX_HEIGHT);
> +
> +	/*
> +	 * Clamp the requested bytes per line value. If the maximum bytes per
> +	 * line value is zero, the module doesn't support user configurable line
> +	 * sizes. Override the requested value with the minimum in that case.
> +	 */
> +	min_bpl = bpl;
> +	max_bpl = rounddown(TEGRA_MAX_WIDTH, chan->stride_align);
> +	temp_bpl = roundup(*bytesperline, chan->stride_align);
> +	*bytesperline = clamp(temp_bpl, min_bpl, max_bpl);
> +}
> +
> +static void tegra_channel_update_format(struct tegra_channel *chan, u32 width,
> +					u32 height, u32 fourcc,
> +					const struct tegra_frac *bpp,
> +					u32 preferred_stride)
> +{
> +	u32 denominator = (!bpp->denominator) ? 1 : bpp->denominator;
> +	u32 numerator = (!bpp->numerator) ? 1 : bpp->numerator;
> +	u32 bytesperline = (width * numerator / denominator);
> +	u32 sizeimage, height_aligned;
> +
> +	chan->format.width = width;
> +	chan->format.height = height;
> +	chan->format.pixelformat = fourcc;
> +	chan->format.bytesperline = preferred_stride ?: bytesperline;
> +
> +	tegra_channel_fmt_align(chan, bpp,
> +				&chan->format.width,
> +				&chan->format.height,
> +				&chan->format.bytesperline);
> +
> +	/* calculate the sizeimage per plane */
> +	height_aligned = roundup(chan->format.height, chan->height_align);
> +	sizeimage = chan->format.bytesperline * height_aligned;
> +	chan->format.sizeimage = roundup(sizeimage, chan->size_align);
> +}
> +
> +static int tegra_channel_get_format(struct file *file, void *fh,
> +				    struct v4l2_format *format)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +
> +	format->fmt.pix = chan->format;
> +
> +	return 0;
> +}
> +
> +static int __tegra_channel_try_format(struct tegra_channel *chan,
> +				      struct v4l2_pix_format *pix,
> +				      const struct tegra_video_format **vfmt)
> +{
> +	const struct tegra_video_format *fmt_info;
> +	struct v4l2_subdev *subdev;
> +	struct v4l2_subdev_format fmt;
> +	struct v4l2_subdev_pad_config *pad_cfg;
> +
> +	subdev = tegra_channel_get_remote_subdev(chan);
> +	pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
> +	if (!pad_cfg)
> +		return -ENOMEM;
> +
> +	/*
> +	 * Retrieve format information and select the default format if the
> +	 * requested format isn't supported.
> +	 */
> +	fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
> +	if (!fmt_info) {
> +		pix->pixelformat = chan->format.pixelformat;
> +		pix->colorspace = chan->format.colorspace;
> +		fmt_info = tegra_core_get_format_by_fourcc(chan,
> +							   pix->pixelformat);
> +	}
> +
> +	/* Change this when start adding interlace format support */
> +	pix->field = V4L2_FIELD_NONE;
> +	fmt.which = V4L2_SUBDEV_FORMAT_TRY;
> +	fmt.pad = 0;
> +	v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
> +	v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
> +
> +	v4l2_fill_pix_format(pix, &fmt.format);
> +	tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
> +				&pix->bytesperline);
> +	pix->sizeimage = pix->bytesperline * pix->height;
> +
> +	if (vfmt)
> +		*vfmt = fmt_info;
> +
> +	v4l2_subdev_free_pad_config(pad_cfg);
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_try_format(struct file *file, void *fh,
> +				    struct v4l2_format *format)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +
> +	return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
> +}
> +
> +static int tegra_channel_set_format(struct file *file, void *fh,
> +				    struct v4l2_format *format)
> +{
> +	struct v4l2_fh *vfh = file->private_data;
> +	struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
> +	const struct tegra_video_format *info;
> +	int ret;
> +	struct v4l2_subdev_format fmt;
> +	struct v4l2_subdev *subdev;
> +	struct v4l2_pix_format *pix = &format->fmt.pix;
> +
> +	if (vb2_is_busy(&chan->queue))
> +		return -EBUSY;
> +
> +	/* get supported format by try_fmt */
> +	ret = __tegra_channel_try_format(chan, pix, &info);
> +	if (ret)
> +		return ret;
> +
> +	subdev = tegra_channel_get_remote_subdev(chan);
> +
> +	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> +	fmt.pad = 0;
> +	v4l2_fill_mbus_format(&fmt.format, pix, info->code);
> +	v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
> +
> +	v4l2_fill_pix_format(pix, &fmt.format);
> +	chan->format = *pix;
> +	chan->fmtinfo = info;
> +	tegra_channel_update_format(chan, pix->width,
> +				    pix->height, info->fourcc,
> +				    &info->bpp,
> +				    pix->bytesperline);
> +	*pix = chan->format;
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_enum_input(struct file *file, void *fh,
> +				    struct v4l2_input *inp)
> +{
> +	/* Currently driver supports internal TPG only */
> +	if (inp->index != 0)
> +		return -EINVAL;
> +
> +	inp->type = V4L2_INPUT_TYPE_CAMERA;
> +	strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
> +
> +	return 0;
> +}
> +
> +static int tegra_channel_g_input(struct file *file, void *priv,
> +				 unsigned int *i)
> +{
> +	*i = 0;
> +	return 0;
> +}
> +
> +static int tegra_channel_s_input(struct file *file, void *priv,
> +				 unsigned int input)
> +{
> +	if (input > 0)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops tegra_channel_ioctl_ops = {
> +	.vidioc_querycap		= tegra_channel_querycap,
> +	.vidioc_enum_fmt_vid_cap	= tegra_channel_enum_format,
> +	.vidioc_g_fmt_vid_cap		= tegra_channel_get_format,
> +	.vidioc_s_fmt_vid_cap		= tegra_channel_set_format,
> +	.vidioc_try_fmt_vid_cap		= tegra_channel_try_format,
> +	.vidioc_enum_input		= tegra_channel_enum_input,
> +	.vidioc_g_input			= tegra_channel_g_input,
> +	.vidioc_s_input			= tegra_channel_s_input,
> +	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
> +	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
> +	.vidioc_querybuf		= vb2_ioctl_querybuf,
> +	.vidioc_qbuf			= vb2_ioctl_qbuf,
> +	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
> +	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
> +	.vidioc_expbuf			= vb2_ioctl_expbuf,
> +	.vidioc_streamon		= vb2_ioctl_streamon,
> +	.vidioc_streamoff		= vb2_ioctl_streamoff,
> +	.vidioc_subscribe_event		= v4l2_ctrl_subscribe_event,
> +	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
> +};
> +
> +/*
> + * V4L2 file operations
> + */
> +static const struct v4l2_file_operations tegra_channel_fops = {
> +	.owner		= THIS_MODULE,
> +	.unlocked_ioctl	= video_ioctl2,
> +	.open		= v4l2_fh_open,
> +	.release	= vb2_fop_release,
> +	.read		= vb2_fop_read,
> +	.poll		= vb2_fop_poll,
> +	.mmap		= vb2_fop_mmap,
> +};
> +
> +int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan)
> +{
> +	int ret;
> +
> +	/* Add test pattern control handler to v4l2 device */
> +	v4l2_ctrl_new_std_menu_items(&chan->ctrl_handler, &vi_ctrl_ops,
> +				     V4L2_CID_TEST_PATTERN,
> +				     ARRAY_SIZE(vi_pattern_strings) - 1,
> +				     0, 0, vi_pattern_strings);
> +	if (chan->ctrl_handler.error) {
> +		dev_err(chan->vi->dev, "failed to add TPG ctrl handler\n");
> +		v4l2_ctrl_handler_free(&chan->ctrl_handler);
> +		return chan->ctrl_handler.error;
> +	}
> +
> +	/* setup the controls */
> +	ret = v4l2_ctrl_handler_setup(&chan->ctrl_handler);
> +	if (ret < 0) {
> +		dev_err(chan->vi->dev, "failed to setup v4l2 ctrl handler\n");
> +		goto free_hdl;
> +	}
> +
> +	return 0;
> +
> +free_hdl:
> +	v4l2_ctrl_handler_free(&chan->ctrl_handler);
> +	return ret;
> +}
> +
> +int tegra_channel_init(struct tegra_channel *chan)
> +{
> +	struct tegra_vi *vi = chan->vi;
> +	struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
> +	int ret;
> +
> +	mutex_init(&chan->video_lock);
> +	INIT_LIST_HEAD(&chan->capture);
> +	INIT_LIST_HEAD(&chan->done);
> +	spin_lock_init(&chan->start_lock);
> +	spin_lock_init(&chan->done_lock);
> +	init_waitqueue_head(&chan->start_wait);
> +	init_waitqueue_head(&chan->done_wait);
> +
> +	/* Default alignments */
> +	chan->width_align = TEGRA_WIDTH_ALIGNMENT;
> +	chan->stride_align = TEGRA_STRIDE_ALIGNMENT;
> +	chan->height_align = TEGRA_HEIGHT_ALIGNMENT;
> +	chan->size_align = TEGRA_SIZE_ALIGNMENT;
> +
> +	/* initialize the video format */
> +	chan->fmtinfo = tegra_core_get_default_format();
> +	chan->format.colorspace = V4L2_COLORSPACE_SRGB;
> +	chan->format.field = V4L2_FIELD_NONE;
> +	tegra_channel_update_format(chan, TEGRA_DEF_WIDTH, TEGRA_DEF_HEIGHT,
> +				    chan->fmtinfo->fourcc,
> +				    &chan->fmtinfo->bpp, 0);
> +
> +	/* initialize the media entity */
> +	chan->pad.flags = MEDIA_PAD_FL_SINK;
> +	ret = media_entity_pads_init(&chan->video.entity, 1, &chan->pad);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = v4l2_ctrl_handler_init(&chan->ctrl_handler, MAX_CID_CONTROLS);
> +	if (chan->ctrl_handler.error) {
> +		dev_err(vi->dev,
> +			"V4L2 controls handler init failed: %d\n", ret);
> +		goto ctrl_init_error;
> +	}
> +
> +	/* initialize the video_device */
> +	chan->video.fops = &tegra_channel_fops;
> +	chan->video.v4l2_dev = &cam->v4l2_dev;
> +	chan->video.queue = &chan->queue;
> +	snprintf(chan->video.name, sizeof(chan->video.name), "%s-%s-%u",
> +		 dev_name(vi->dev), "output", chan->port);
> +	chan->video.vfl_type = VFL_TYPE_GRABBER;
> +	chan->video.vfl_dir = VFL_DIR_RX;
> +	chan->video.release = video_device_release_empty;
> +	chan->video.ioctl_ops = &tegra_channel_ioctl_ops;
> +	chan->video.ctrl_handler = &chan->ctrl_handler;
> +	chan->video.lock = &chan->video_lock;
> +	chan->video.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> +				  V4L2_CAP_READWRITE;
> +
> +	video_set_drvdata(&chan->video, chan);
> +	chan->sp = host1x_syncpt_request(&vi->client, HOST1X_SYNCPT_HAS_BASE);
> +	if (!chan->sp) {
> +		dev_err(vi->dev, "failed to request syncpoint\n");
> +		ret = -ENOMEM;
> +		goto host1x_sp_error;
> +	}
> +
> +	chan->queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	chan->queue.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
> +	chan->queue.lock = &chan->video_lock;
> +	chan->queue.drv_priv = chan;
> +	chan->queue.buf_struct_size = sizeof(struct tegra_channel_buffer);
> +	chan->queue.ops = &tegra_channel_queue_qops;
> +	chan->queue.mem_ops = &vb2_dma_contig_memops;
> +	chan->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
> +				   | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;

Just drop V4L2_BUF_FLAG_TSTAMP_SRC_EOF, it's 0 anyway. It's not common practice
to set this.

> +	chan->queue.dev = vi->dev;
> +	ret = vb2_queue_init(&chan->queue);
> +	if (ret < 0) {
> +		dev_err(vi->dev,
> +			"failed to initialize VB2 queue, err: %d\n", ret);
> +		goto vb2_init_error;
> +	}
> +
> +	ret = video_register_device(&chan->video, VFL_TYPE_GRABBER, -1);
> +	if (ret < 0) {
> +		dev_err(&chan->video.dev,
> +			"failed to register video device, err: %d\n", ret);
> +		goto video_register_error;
> +	}
> +
> +	return 0;
> +
> +video_register_error:
> +	vb2_queue_release(&chan->queue);
> +vb2_init_error:
> +	host1x_syncpt_free(chan->sp);
> +host1x_sp_error:
> +	v4l2_ctrl_handler_free(&chan->ctrl_handler);
> +ctrl_init_error:
> +	media_entity_cleanup(&chan->video.entity);
> +	return ret;
> +}
> +
> +int tegra_channel_cleanup(struct tegra_channel *chan)
> +{
> +	if (video_is_registered(&chan->video)) {
> +		video_unregister_device(&chan->video);
> +		vb2_queue_release(&chan->queue);
> +		media_entity_cleanup(&chan->video.entity);
> +	}
> +
> +	host1x_syncpt_free(chan->sp);
> +	v4l2_ctrl_handler_free(&chan->ctrl_handler);
> +
> +	return 0;
> +}
> diff --git a/drivers/staging/media/tegra/tegra-core.c b/drivers/staging/media/tegra/tegra-core.c
> new file mode 100644
> index 000000000000..80ede3ad7266
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-core.c
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/export.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#include "mc_common.h"
> +#include "tegra-core.h"
> +
> +static const struct tegra_video_format tegra_default_format = {
> +	/* RAW 10 */
> +	TEGRA_VF_RAW10,
> +	10,
> +	MEDIA_BUS_FMT_SRGGB10_1X10,
> +	{2, 1},
> +	TEGRA_IMAGE_FORMAT_DEF,
> +	TEGRA_IMAGE_DT_RAW10,
> +	V4L2_PIX_FMT_SRGGB10,
> +	"RGRG.. GBGB..",

Is this string used anywhere? The v4l2 core automatically sets the pixelformat
description for you in VIDIOC_ENUMFMT these days.

> +};
> +
> +/*
> + * Helper functions
> + */
> +
> +/**
> + * tegra_core_get_default_format - Get default format
> + *
> + * Return: pointer to the format where the default format needs
> + * to be filled in.
> + */
> +const struct tegra_video_format *tegra_core_get_default_format(void)
> +{
> +	return &tegra_default_format;
> +}
> +
> +/**
> + * tegra_core_get_fourcc_by_idx - get fourcc of a tegra_video format
> + * @index: array index of the tegra_video_formats
> + *
> + * Return: fourcc code
> + */
> +u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
> +				 unsigned int index)
> +{
> +	if (index >= chan->nformats)
> +		return -EINVAL;
> +
> +	return chan->video_formats[index].fourcc;
> +}
> +
> +/**
> + * tegra_core_get_word_count - Calculate word count
> + * @frame_width: number of pixels per line
> + * @fmt: Tegra Video format struct which has BPP information
> + *
> + * Return: word count number
> + */
> +u32 tegra_core_get_word_count(unsigned int frame_width,
> +			      const struct tegra_video_format *fmt)
> +{
> +	return frame_width * fmt->width / 8;
> +}
> +
> +/**
> + * tegra_core_get_idx_by_code - Retrieve index for a media bus code
> + * @chan: tegra_channel
> + * @code: the format media bus code
> + * @offset: offset in video formats from where to start the search
> + *
> + * Return: a index to the format information structure corresponding to the
> + * given V4L2 media bus format @code, or -1 if no corresponding format can
> + * be found.
> + */
> +int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
> +			       unsigned int offset)
> +{
> +	unsigned int i;
> +
> +	for (i = offset; i < chan->nformats; ++i) {
> +		if (chan->video_formats[i].code == code)
> +			return i;
> +	}
> +
> +	return -1;
> +}
> +
> +/**
> + * tegra_core_get_format_by_fourcc - Retrieve format information for a 4CC
> + * @fourcc: the format 4CC
> + *
> + * Return: a pointer to the format information structure corresponding to the
> + * given V4L2 format @fourcc, or NULL if no corresponding format can be
> + * found.
> + */
> +const struct tegra_video_format *
> +tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < chan->nformats; ++i) {
> +		if (chan->video_formats[i].fourcc == fourcc)
> +			return &chan->video_formats[i];
> +	}
> +
> +	return NULL;
> +}
> diff --git a/drivers/staging/media/tegra/tegra-core.h b/drivers/staging/media/tegra/tegra-core.h
> new file mode 100644
> index 000000000000..193065d20a95
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-core.h
> @@ -0,0 +1,125 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#ifndef __TEGRA_CORE_H__
> +#define __TEGRA_CORE_H__
> +
> +#include <media/v4l2-subdev.h>
> +
> +/* Minimum and maximum width and height common to Tegra video input device. */
> +#define TEGRA_MIN_WIDTH		32U
> +#define TEGRA_MAX_WIDTH		32768U
> +#define TEGRA_MIN_HEIGHT	32U
> +#define TEGRA_MAX_HEIGHT	32768U
> +
> +/* Width alignment */
> +#define TEGRA_WIDTH_ALIGNMENT	1
> +/* Stride alignment */
> +#define TEGRA_STRIDE_ALIGNMENT	1
> +/* Height alignment */
> +#define TEGRA_HEIGHT_ALIGNMENT	1
> +/* Size alignment */
> +#define TEGRA_SIZE_ALIGNMENT	1
> +
> +/* 1080p resolution as default resolution for test pattern generator */
> +#define TEGRA_DEF_WIDTH		1920
> +#define TEGRA_DEF_HEIGHT	1080
> +
> +#define TEGRA_VF_DEF		MEDIA_BUS_FMT_SRGGB10_1X10
> +#define TEGRA_IMAGE_FORMAT_DEF	32
> +
> +/*
> + * These go into the TEGRA_VI_CSI_n_CSI_IMAGE_DT registers bits 7:0
> + * Input data type of VI channel.
> + */
> +enum tegra_image_dt {
> +	TEGRA_IMAGE_DT_YUV420_8 = 24,
> +	TEGRA_IMAGE_DT_YUV420_10,
> +
> +	TEGRA_IMAGE_DT_YUV420CSPS_8 = 28,
> +	TEGRA_IMAGE_DT_YUV420CSPS_10,
> +	TEGRA_IMAGE_DT_YUV422_8,
> +	TEGRA_IMAGE_DT_YUV422_10,
> +	TEGRA_IMAGE_DT_RGB444,
> +	TEGRA_IMAGE_DT_RGB555,
> +	TEGRA_IMAGE_DT_RGB565,
> +	TEGRA_IMAGE_DT_RGB666,
> +	TEGRA_IMAGE_DT_RGB888,
> +
> +	TEGRA_IMAGE_DT_RAW6 = 40,
> +	TEGRA_IMAGE_DT_RAW7,
> +	TEGRA_IMAGE_DT_RAW8,
> +	TEGRA_IMAGE_DT_RAW10,
> +	TEGRA_IMAGE_DT_RAW12,
> +	TEGRA_IMAGE_DT_RAW14,
> +};
> +
> +/* Supported CSI to VI Data Formats */
> +enum tegra_vf_code {
> +	TEGRA_VF_RAW6 = 0,
> +	TEGRA_VF_RAW7,
> +	TEGRA_VF_RAW8,
> +	TEGRA_VF_RAW10,
> +	TEGRA_VF_RAW12,
> +	TEGRA_VF_RAW14,
> +	TEGRA_VF_EMBEDDED8,
> +	TEGRA_VF_RGB565,
> +	TEGRA_VF_RGB555,
> +	TEGRA_VF_RGB888,
> +	TEGRA_VF_RGB444,
> +	TEGRA_VF_RGB666,
> +	TEGRA_VF_YUV422,
> +	TEGRA_VF_YUV420,
> +	TEGRA_VF_YUV420_CSPS,
> +};
> +
> +/**
> + * struct tegra_frac
> + * @numerator: numerator of the fraction
> + * @denominator: denominator of the fraction
> + */
> +struct tegra_frac {
> +	unsigned int numerator;
> +	unsigned int denominator;
> +};
> +
> +/**
> + * struct tegra_video_format - Tegra video format description
> + * @vf_code: video format code
> + * @width: format width in bits per component
> + * @code: media bus format code
> + * @bpp: bytes per pixel (when stored in memory)
> + * @img_fmt: image format
> + * @img_dt: image data type
> + * @fourcc: V4L2 pixel format FCC identifier
> + * @description: format description, suitable for userspace

As mentioned above: this is almost certainly no longer needed.

> + */
> +struct tegra_video_format {
> +	enum tegra_vf_code vf_code;
> +	unsigned int width;
> +	unsigned int code;
> +	struct tegra_frac bpp;
> +	u32 img_fmt;
> +	enum tegra_image_dt img_dt;
> +	u32 fourcc;
> +	__u8 description[32];
> +};
> +
> +#define	TEGRA_VIDEO_FORMAT(VF_CODE, BPP, MBUS_CODE, FRAC_BPP_NUM,	\
> +	FRAC_BPP_DEN, FORMAT, DATA_TYPE, FOURCC, DESCRIPTION)		\
> +{									\
> +	TEGRA_VF_##VF_CODE,						\
> +	BPP,								\
> +	MEDIA_BUS_FMT_##MBUS_CODE,					\
> +	{FRAC_BPP_NUM, FRAC_BPP_DEN},					\
> +	TEGRA_IMAGE_FORMAT_##FORMAT,					\
> +	TEGRA_IMAGE_DT_##DATA_TYPE,					\
> +	V4L2_PIX_FMT_##FOURCC,						\
> +	DESCRIPTION,							\
> +}
> +
> +u32 tegra_core_get_word_count(unsigned int frame_width,
> +			      const struct tegra_video_format *fmt);
> +#endif
> diff --git a/drivers/staging/media/tegra/tegra-csi.c b/drivers/staging/media/tegra/tegra-csi.c
> new file mode 100644
> index 000000000000..f6153acd60cb
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-csi.c
> @@ -0,0 +1,380 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk/tegra.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/host1x.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> +
> +#include "csi.h"
> +#include "mc_common.h"
> +#include "csi2_fops.h"
> +#include "host1x-video.h"
> +#include "vi2_registers.h"
> +
> +static inline struct tegra_csi_device *
> +host1x_client_to_csi(struct host1x_client *client)
> +{
> +	return container_of(client, struct tegra_csi_device, client);
> +}
> +
> +static inline struct tegra_csi_channel *to_csi_chan(struct v4l2_subdev *subdev)
> +{
> +	return container_of(subdev, struct tegra_csi_channel, subdev);
> +}
> +
> +/*
> + * V4L2 Subdevice Video Operations
> + */
> +static int tegra_csi_s_stream(struct v4l2_subdev *subdev, int enable)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	struct tegra_channel *chan = subdev->host_priv;
> +	u8 pg_mode = chan->vi->pg_mode;
> +
> +	return csi->fops->csi_start_streaming(csi_chan, pg_mode, enable);
> +}
> +
> +/*
> + * Only use this subdevice media bus ops for test pattern generator,
> + * because CSI device is an separated subdevice which has 6 source
> + * pads to generate test pattern.
> + */
> +static struct v4l2_mbus_framefmt tegra_csi_tpg_fmts[] = {
> +	{
> +		TEGRA_DEF_WIDTH,
> +		TEGRA_DEF_HEIGHT,
> +		MEDIA_BUS_FMT_SRGGB10_1X10,
> +		V4L2_FIELD_NONE,
> +		V4L2_COLORSPACE_SRGB
> +	},
> +	{
> +		TEGRA_DEF_WIDTH,
> +		TEGRA_DEF_HEIGHT,
> +		MEDIA_BUS_FMT_RGB888_1X32_PADHI,
> +		V4L2_FIELD_NONE,
> +		V4L2_COLORSPACE_SRGB
> +	}
> +
> +};
> +
> +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
> +	{1280, 720},
> +	{1920, 1080},
> +	{3840, 2160},
> +};
> +
> +/*
> + * V4L2 Subdevice Pad Operations
> + */
> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
> +				struct v4l2_subdev_pad_config *cfg,
> +				struct v4l2_subdev_format *fmt)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +
> +	mutex_lock(&csi_chan->format_lock);
> +	memcpy(fmt, &csi_chan->ports->format,
> +	       sizeof(struct v4l2_mbus_framefmt));
> +	mutex_unlock(&csi_chan->format_lock);
> +
> +	return 0;
> +}
> +
> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
> +				   struct v4l2_mbus_framefmt *mfmt)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +	const struct v4l2_frmsize_discrete *sizes;
> +	int i, j;
> +
> +	for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
> +		struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
> +
> +		if (mfmt->code == mbus_fmt->code) {
> +			for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
> +				sizes = &tegra_csi_tpg_sizes[j];
> +				if (mfmt->width == sizes->width &&
> +				    mfmt->height == sizes->height) {
> +					return;
> +				}
> +			}
> +		}
> +
> +		dev_info(csi->dev, "using Tegra default RAW10 video format\n");
> +	}
> +
> +	dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
> +	memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
> +}
> +
> +static int tegra_csi_set_format(struct v4l2_subdev *subdev,
> +				struct v4l2_subdev_pad_config *cfg,
> +				struct v4l2_subdev_format *fmt)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +	struct v4l2_mbus_framefmt *format = &fmt->format;
> +
> +	tegra_csi_try_mbus_fmt(subdev, format);
> +
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> +		return 0;
> +
> +	mutex_lock(&csi_chan->format_lock);
> +	memcpy(&csi_chan->ports->format, format,
> +	       sizeof(struct v4l2_mbus_framefmt));

Just do: csi_chan->ports->format = *format;

> +	mutex_unlock(&csi_chan->format_lock);
> +
> +	return 0;
> +}
> +
> +/*
> + * V4L2 Subdevice Operations
> + */
> +static struct v4l2_subdev_video_ops tegra_csi_video_ops = {
> +	.s_stream = tegra_csi_s_stream,
> +};
> +
> +static struct v4l2_subdev_pad_ops tegra_csi_pad_ops = {
> +	.get_fmt		= tegra_csi_get_format,
> +	.set_fmt		= tegra_csi_set_format,
> +};
> +
> +static struct v4l2_subdev_ops tegra_csi_ops = {
> +	.video  = &tegra_csi_video_ops,
> +	.pad    = &tegra_csi_pad_ops,
> +};
> +
> +/*
> + * Media Operations
> + */
> +static const struct media_entity_operations tegra_csi_media_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static int tegra_csi_tpg_channels_alloc(struct tegra_csi_device *csi)
> +{
> +	struct device_node *node = csi->dev->of_node;
> +	unsigned int port_num;
> +	int ret;
> +	struct tegra_csi_channel *item;
> +	unsigned int tpg_channels = csi->soc_data->num_tpg_channels;
> +
> +	/* allocate CSI channel for each CSI x2 ports */
> +	for (port_num = 0; port_num < tpg_channels; port_num++) {
> +		item = devm_kzalloc(csi->dev, sizeof(*item), GFP_KERNEL);
> +		if (!item) {
> +			ret = -ENOMEM;
> +			goto error;
> +		}
> +
> +		list_add_tail(&item->list, &csi->csi_chans);
> +		item->csi = csi;
> +		item->csi_port_num = port_num;
> +		item->numlanes = 2;
> +		item->of_node = node;
> +		item->numpads = 1;
> +		item->pads[0].flags = MEDIA_PAD_FL_SOURCE;
> +	}
> +
> +	return 0;
> +
> +error:
> +	list_for_each_entry(item, &csi->csi_chans, list)
> +		list_del(&item->list);
> +
> +	return ret;
> +}
> +
> +static int tegra_csi_channel_init(struct tegra_csi_channel *chan)
> +{
> +	struct tegra_csi_device *csi = chan->csi;
> +	struct v4l2_subdev *subdev;
> +	int ret;
> +
> +	chan->ports = devm_kzalloc(csi->dev, sizeof(struct tegra_csi_port),
> +				   GFP_KERNEL);
> +	if (!chan->ports)
> +		return -ENOMEM;
> +
> +	mutex_init(&chan->format_lock);
> +
> +	/* initialize the default format */
> +	chan->ports->format.code = TEGRA_VF_DEF;
> +	chan->ports->format.field = V4L2_FIELD_NONE;
> +	chan->ports->format.colorspace = V4L2_COLORSPACE_SRGB;
> +	chan->ports->format.width = TEGRA_DEF_WIDTH;
> +	chan->ports->format.height = TEGRA_DEF_HEIGHT;
> +	chan->ports->lanes = chan->numlanes;
> +
> +	/* initialize V4L2 subdevice and media entity */
> +	subdev = &chan->subdev;
> +	v4l2_subdev_init(subdev, &tegra_csi_ops);
> +	subdev->dev = csi->dev;
> +	snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "%s-%d", "tpg",
> +		 chan->csi_port_num);
> +
> +	v4l2_set_subdevdata(subdev, chan);
> +	subdev->fwnode = of_fwnode_handle(chan->of_node);
> +	subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	subdev->entity.ops = &tegra_csi_media_ops;
> +
> +	/* initialize media entity pads */
> +	ret = media_entity_pads_init(&subdev->entity, chan->numpads,
> +				     chan->pads);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = v4l2_async_register_subdev(subdev);
> +	if (ret < 0) {
> +		dev_err(csi->dev, "failed to register subdev\n");
> +		media_entity_cleanup(&subdev->entity);
> +	}
> +
> +	return ret;
> +}
> +
> +void tegra_csi_error_status(struct v4l2_subdev *subdev)
> +{
> +	struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
> +	struct tegra_csi_device *csi = csi_chan->csi;
> +
> +	csi->fops->csi_err_status(csi_chan);
> +}
> +EXPORT_SYMBOL(tegra_csi_error_status);
> +
> +static int tegra_csi_init(struct host1x_client *client)
> +{
> +	struct tegra_csi_device *csi = host1x_client_to_csi(client);
> +	struct tegra_camera *cam = dev_get_drvdata(client->host);
> +	struct tegra_csi_channel *item;
> +	int ret;
> +
> +	cam->csi = csi;
> +
> +	INIT_LIST_HEAD(&csi->csi_chans);
> +
> +	ret = tegra_csi_tpg_channels_alloc(csi);
> +	if (ret < 0)
> +		return ret;
> +
> +	list_for_each_entry(item, &csi->csi_chans, list) {
> +		ret = tegra_csi_channel_init(item);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = csi->fops->hw_init(csi);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int tegra_csi_exit(struct host1x_client *client)
> +{
> +	struct tegra_camera *cam = dev_get_drvdata(client->host);
> +	struct v4l2_subdev *subdev;
> +	struct tegra_csi_channel *chan;
> +
> +	if (!cam->csi)
> +		return 0;
> +
> +	list_for_each_entry(chan, &cam->csi->csi_chans, list) {
> +		mutex_destroy(&chan->format_lock);
> +		subdev = &chan->subdev;
> +		media_entity_cleanup(&subdev->entity);
> +		v4l2_async_unregister_subdev(subdev);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct host1x_client_ops csi_client_ops = {
> +	.init = tegra_csi_init,
> +	.exit = tegra_csi_exit,
> +};
> +
> +static int tegra_csi_probe(struct platform_device *pdev)
> +{
> +	struct tegra_csi_device *csi;
> +	struct resource *res;
> +	int ret;
> +
> +	csi = devm_kzalloc(&pdev->dev, sizeof(*csi), GFP_KERNEL);
> +	if (!csi)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	csi->iomem = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(csi->iomem))
> +		return PTR_ERR(csi->iomem);
> +
> +	csi->soc_data = of_device_get_match_data(&pdev->dev);
> +	if (!csi->soc_data) {
> +		dev_info(&pdev->dev, "No platform data\n\n");
> +		return -ENODATA;
> +	}
> +
> +	csi->dev = &pdev->dev;
> +	csi->fops = csi->soc_data->csi_fops;
> +	platform_set_drvdata(pdev, csi);
> +
> +	/* initialize host1x interface */
> +	INIT_LIST_HEAD(&csi->client.list);
> +	csi->client.ops = &csi_client_ops;
> +	csi->client.dev = &pdev->dev;
> +
> +	ret = host1x_client_register(&csi->client);
> +	if (ret < 0) {
> +		dev_err(csi->dev, "failed to register host1x client: %d\n",
> +			ret);
> +		return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tegra_csi_remove(struct platform_device *pdev)
> +{
> +	struct tegra_csi_device *csi = platform_get_drvdata(pdev);
> +
> +	host1x_client_unregister(&csi->client);
> +
> +	return 0;
> +}
> +
> +static struct tegra_csi_soc_data tegra210_csi_data = {
> +	.csi_fops = &csi2_fops,
> +	.cil_max_clk_hz = TEGRA210_CSI_CIL_CLK_MAX,
> +	.num_tpg_channels = TEGRA210_MAX_CHANNELS,
> +};
> +
> +static const struct of_device_id tegra_csi_of_id_table[] = {
> +	{ .compatible = "nvidia,tegra210-csi", .data = &tegra210_csi_data },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, tegra_csi_of_id_table);
> +
> +struct platform_driver tegra_csi_driver = {
> +	.driver = {
> +		.name		= "tegra-csi",
> +		.of_match_table	= tegra_csi_of_id_table,
> +	},
> +	.probe			= tegra_csi_probe,
> +	.remove			= tegra_csi_remove,
> +};
> +
> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
> +MODULE_DESCRIPTION("NVIDIA Tegra CSI Device Driver");
> +MODULE_LICENSE("GPL v2");

<snip>

This is just from a quick review. I see a number of areas that I want
to discuss in more detail, I hope to get to that tomorrow or Friday at
the latest. I'm currently trying to setup my Jetson TX1 board so I can
test this series.

Regards,

	Hans

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-29  9:46   ` Thierry Reding
@ 2020-01-29 16:22     ` Sowjanya Komatineni
  2020-01-30 12:36       ` Thierry Reding
  0 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29 16:22 UTC (permalink / raw)
  To: Thierry Reding
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel


On 1/29/20 1:46 AM, Thierry Reding wrote:
> On Tue, Jan 28, 2020 at 10:23:21AM -0800, Sowjanya Komatineni wrote:
>> Tegra210 contains VI controller for video input capture from MIPI
>> CSI camera sensors and also supports built-in test pattern generator.
>>
>> CSI ports can be one-to-one mapped to VI channels for capturing from
>> an external sensor or from built-in test pattern generator.
>>
>> This patch adds support for VI and CSI and enables them in Tegra210
>> device tree.
>>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>> ---
>>   arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  8 +++++++
>>   arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 +++++++++++++++++++++++++-
>>   2 files changed, 38 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> index b0095072bc28..ec1b3033fa03 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> @@ -10,6 +10,14 @@
>>   			status = "okay";
>>   		};
>>   
>> +		vi@54080000 {
>> +			status = "okay";
>> +		};
>> +
>> +		csi@0x54080838 {
>> +			status = "okay";
>> +		};
>> +
>>   		sor@54580000 {
>>   			status = "okay";
>>   
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>> index 48c63256ba7f..c6107ec03ad1 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>> @@ -136,9 +136,38 @@
>>   
>>   		vi@54080000 {
>>   			compatible = "nvidia,tegra210-vi";
>> -			reg = <0x0 0x54080000 0x0 0x00040000>;
>> +			reg = <0x0 0x54080000 0x0 0x808>;
>>   			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>>   			status = "disabled";
>> +			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
>> +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
>> +
>> +			clocks = <&tegra_car TEGRA210_CLK_VI>;
>> +			clock-names = "vi";
>> +			resets = <&tegra_car 20>;
>> +			reset-names = "vi";
>> +		};
>> +
>> +		csi@0x54080838 {
>> +			compatible = "nvidia,tegra210-csi";
>> +			reg = <0x0 0x54080838 0x0 0x2000>;
>> +			status = "disabled";
>> +			assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
>> +					  <&tegra_car TEGRA210_CLK_CILCD>,
>> +					  <&tegra_car TEGRA210_CLK_CILE>;
>> +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
>> +						 <&tegra_car TEGRA210_CLK_PLL_P>,
>> +						 <&tegra_car TEGRA210_CLK_PLL_P>;
>> +			assigned-clock-rates = <102000000>,
>> +					       <102000000>,
>> +					       <102000000>;
>> +
>> +			clocks = <&tegra_car TEGRA210_CLK_CSI>,
>> +				 <&tegra_car TEGRA210_CLK_CILAB>,
>> +				 <&tegra_car TEGRA210_CLK_CILCD>,
>> +				 <&tegra_car TEGRA210_CLK_CILE>;
>> +			clock-names = "csi", "cilab", "cilcd", "cile";
>> +
>>   		};
> Can this be a child of the vi node? Looking at the register ranges it
> seems like these are actually a single IP block. If they have separate
> blocks with clearly separate functionality, then it makes sense to have
> CSI be a child node of VI, though it may also be okay to merge both and
> have a single node with the driver doing all of the differentiation
> between what's VI and what's CSI.
>
> Looking at later chips, the split between VI and CSI is more explicit,
> so having the split in DT for Tegra210 may make sense for consistency.
>
> I know we've discussed this before, but for some reason I keep coming
> back to this. I'll go through the other patches to see if I can get a
> clearer picture of how this could all work together.
>
> Thierry

We can keep it separate as we discussed.

But as Tegra186 onwards, CSI is separate device to be all cosistent I 
kept CSI as separate node for Tegra210 as well.


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 10:09       ` Thierry Reding
@ 2020-01-29 16:25         ` Sowjanya Komatineni
  0 siblings, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29 16:25 UTC (permalink / raw)
  To: Thierry Reding
  Cc: Helen Koike, jonathanh, frankc, hverkuil, linux-media,
	devicetree, linux-clk, linux-tegra, linux-kernel


On 1/29/20 2:09 AM, Thierry Reding wrote:
> On Tue, Jan 28, 2020 at 02:13:17PM -0800, Sowjanya Komatineni wrote:
>> On 1/28/20 1:45 PM, Helen Koike wrote:
> [...]
>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
> [...]
>>>> +const struct tegra_csi_fops csi2_fops = {
>>>> +     .hw_init = csi2_hw_init,
>>>> +     .csi_start_streaming = csi2_start_streaming,
>>>> +     .csi_err_status = csi2_error_status,
>>>> +};
>>> If I saw correctly, you don't have other instances of struct tegra_csi_fops with different functions.
>>> So why not exposing the functions directly instead of creating a global variable?
>> Currently driver supports Tegra210 only. Later we will add for Tegra186 and
>> Tegra184 support too where we will have separate csi fops.
> Perhaps this structure should be prefixed with a tegra210_ to make that
> more obvious?
Will fix prefix in v2
>>>> +EXPORT_SYMBOL(csi2_fops);
> Also, why do we need to export these? These will be built as linked into
> the Tegra VI driver, which is the only one that uses these, right? Would
> it not be enough to just make it global? Why the need to export?
>
> Thierry
Will fix in v2

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 11:13   ` Thierry Reding
@ 2020-01-29 17:23     ` Sowjanya Komatineni
  2020-01-30 12:20       ` Thierry Reding
  0 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29 17:23 UTC (permalink / raw)
  To: Thierry Reding
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel


On 1/29/20 3:13 AM, Thierry Reding wrote:
> On Tue, Jan 28, 2020 at 10:23:20AM -0800, Sowjanya Komatineni wrote:
>> diff --git a/drivers/staging/media/tegra/csi.h b/drivers/staging/media/tegra/csi.h
> [...]
>> +struct tegra_csi_soc_data {
> I'd just leave out the _data suffix since it's not useful.
>
>> +	const struct tegra_csi_fops *csi_fops;
>> +	unsigned int cil_max_clk_hz;
>> +	unsigned int num_tpg_channels;
>> +};
>> +
>> +/**
>> + * struct tegra_csi_device - NVIDIA Tegra CSI device structure
>> + * @dev: device struct
>> + * @client: host1x_client struct
>> + *
>> + * @iomem: register base
>> + * @csi_clk: clock for CSI
>> + * @cilab_clk: clock for CIL AB
>> + * @cilcd_clk: clock for CIL CD
>> + * @cilef_clk: clock for CIL EF
>> + * @tpg_clk: clock for internal CSI TPG logic
>> + *
>> + * @soc_data: pointer to SoC data structure
>> + * @fops: csi operations
>> + *
>> + * @channels: list of CSI channels
>> + */
>> +struct tegra_csi_device {
>> +	struct device *dev;
>> +	struct host1x_client client;
>> +
>> +	void __iomem *iomem;
>> +	struct clk *csi_clk;
>> +	struct clk *cilab_clk;
>> +	struct clk *cilcd_clk;
>> +	struct clk *cilef_clk;
>> +	struct clk *tpg_clk;
>> +	atomic_t clk_refcnt;
>> +
>> +	const struct tegra_csi_soc_data *soc_data;
> Same here. No need for the _data suffix, it's just an extra 5 characters
> that you have to potentially repeat a lot but doesn't add anything.
>
>> +	const struct tegra_csi_fops *fops;
>> +
>> +	struct list_head csi_chans;
>> +};
>> +
>> +void tegra_csi_error_status(struct v4l2_subdev *subdev);
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/csi2_fops.c b/drivers/staging/media/tegra/csi2_fops.c
>> new file mode 100644
>> index 000000000000..5f2f7bd3ae50
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/csi2_fops.c
>> @@ -0,0 +1,335 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk/tegra.h>
>> +#include <linux/delay.h>
>> +
>> +#include "vi2_registers.h"
>> +#include "mc_common.h"
>> +#include "csi2_fops.h"
>> +#include "csi.h"
>> +
>> +/* CSI block registers offset */
>> +#define TEGRA210_CSI_PORT_OFFSET		0x34
>> +/* CSI CIL parition registers offset */
>> +#define TEGRA210_CSI_CIL_OFFSET			0x0f4
>> +/* CSI TPG registers offset */
>> +#define TEGRA210_CSI_TPG_OFFSET			0x18c
>> +
>> +#define CSI_PP_OFFSET(block)	((block) * 0x800)
>> +
>> +static void csi_write(struct tegra_csi_channel *chan, u8 block,
>> +		      unsigned int addr, u32 val)
>> +{
>> +	void __iomem *csi_pp_base;
>> +
>> +	csi_pp_base = chan->csi->iomem + CSI_PP_OFFSET(block);
>> +	writel(val, csi_pp_base + addr);
>> +}
>> +
>> +/* Pixel parser registers accessors */
>> +static void pp_write(struct tegra_csi_port *port, u32 addr, u32 val)
>> +{
>> +	writel(val, port->pixel_parser + addr);
>> +}
>> +
>> +static u32 pp_read(struct tegra_csi_port *port, u32 addr)
>> +{
>> +	return readl(port->pixel_parser + addr);
>> +}
>> +
>> +/* CSI CIL A/B port registers accessors */
>> +static void cil_write(struct tegra_csi_port *port, u8 port_id,
>> +		      u32 addr, u32 val)
>> +{
>> +	if (port_id & PORT_B)
>> +		writel(val, port->cilb + addr);
>> +	else
>> +		writel(val, port->cila + addr);
>> +}
>> +
>> +static u32 cil_read(struct tegra_csi_port *port, u8 port_id,
>> +		    u32 addr)
>> +{
>> +	if (port_id & PORT_B)
>> +		return readl(port->cilb + addr);
>> +	else
>> +		return readl(port->cila + addr);
>> +}
>> +
>> +/* Test pattern generator registers accessor */
>> +static void tpg_write(struct tegra_csi_port *port, unsigned int addr, u32 val)
>> +{
>> +	writel(val, port->tpg + addr);
>> +}
> These register accessors all look a bit convoluted to me. For example,
> the cil_write()/cil_read() take a port ID in order to select between
> port->cila and port->cilb register banks. But then during ->hw_init()
> you need to go and assign port->cila and port->cilb using a CIL base
> and a port offset from that base.
>
> So it sounds like this could be done much easier by doing something
> like:
>
> 	static u32 cil_read(struct tegra_csi_port *port, u8 port_id, u32 addr)
> 	{
> 		unsigned int offset = port_id * TEGRA210_CSI_PORT_OFFSET;
>
> 		return readl(port->cila + TEGRA210_CSI_CIL_OFFSET + offset);
> 	}
>
> Obviously there'd be no need for port->cilb in that case and port->cila
> could just be port->cil. Furthermore, since you have the prefixes here
> it sounds like these will be different for other generations, so perhaps
> they can be parameterized as part of the SoC-specific structure?
>
> Another thing that I find confusing is that we have a structure called
> tegra_csi_port, but in order to access registers within it we also need
> to pass a port ID. So it sounds like whatever tegra_csi_port represents
> isn't really a port.
>
> Do you have any ideas on how to simplify this? It's not a terribly big
> deal, so feel free to leave it like this for now. I can take a look at
> simplifying later on if it keeps bugging me.

Will update cil_write/read to use cila port and compute for cilb based 
on port id.

in csi2_hw_init, all corresponding PP/CILA/CILB/TPG register base offset 
computation based on CSI port id can all be moved into the corresponding 
pp/cil/csi/tpg_read/write. We can also move framefmt into csi_channel as 
get rid of csi_port.

>> +static int csi2_start_streaming(struct tegra_csi_channel *csi_chan,
>> +				u8 pg_mode, int enable)
>> +{
>> +	struct tegra_csi_device *csi = csi_chan->csi;
>> +	unsigned int port_num = csi_chan->csi_port_num;
>> +	unsigned int block = port_num >> 1;
>> +	struct tegra_csi_port *port = csi_chan->ports;
>> +	unsigned int cil_max_freq = csi->soc_data->cil_max_clk_hz;
>> +	struct clk *cil_clk;
>> +	int ret;
>> +
>> +	if (block == CSI_CIL_AB)
>> +		cil_clk = csi->cilab_clk;
>> +	else if (block == CSI_CIL_CD)
>> +		cil_clk = csi->cilcd_clk;
>> +	else
>> +		cil_clk = csi->cilef_clk;
>> +
>> +	if (enable) {
>> +		ret = clk_set_rate(cil_clk, cil_max_freq);
>> +		if (ret)
>> +			dev_err(csi->dev,
>> +				"failed to set cil clk rate, err: %d\n", ret);
> Perhaps dev_warn() since it's not a fatal error? Also, maybe spell out
> "clock" in error messages (and perhaps s/cil/CIL/). I also personally
> prefer the style of error messages to be:
>
> 	"failed to ...: %d\n"
>
> i.e. without that ", err" in there. We use that style very widely, which
> has the advantage of making the log look very consistent.
Will update
>> +
>> +		/* enable CIL clock on first open */
>> +		if (atomic_add_return(1, &csi->clk_refcnt) == 1) {
>> +			ret = clk_prepare_enable(cil_clk);
>> +			if (ret) {
>> +				dev_err(csi->dev,
>> +					"failed to enable cil clk, err: %d\n",
>> +					ret);
>> +				return ret;
>> +			}
>> +		}
>> +
>> +		/*
>> +		 * On Tegra210, TPG internal logic uses PLLD out along with
>> +		 * the CIL clock.
>> +		 * So, enable TPG clock during TPG mode streaming.
>> +		 */
>> +		if (pg_mode) {
>> +			ret = clk_set_rate(csi->tpg_clk, TEGRA210_TPG_CLOCK);
>> +			if (ret)
>> +				dev_err(csi->dev,
>> +					"failed to set tpg clk rate\n");
>> +
>> +			ret = clk_prepare_enable(csi->tpg_clk);
>> +			if (ret) {
>> +				dev_err(csi->dev,
>> +					"failed to enable tpg clk, err: %d\n",
>> +					ret);
>> +				return ret;
>> +			}
>> +		}
>> +
>> +		csi_write(csi_chan, block, TEGRA_CSI_CLKEN_OVERRIDE, 0);
>> +
>> +		/* clean up status */
>> +		pp_write(port, TEGRA_CSI_PIXEL_PARSER_STATUS, 0xFFFFFFFF);
>> +		cil_write(port, port_num, TEGRA_CSI_CIL_STATUS, 0xFFFFFFFF);
>> +		cil_write(port, port_num, TEGRA_CSI_CILX_STATUS, 0xFFFFFFFF);
>> +		cil_write(port, port_num, TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
>> +
>> +		/* CIL PHY registers setup */
>> +		cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
>> +		cil_write(port, port_num, TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
>> +
>> +		/*
>> +		 * The CSI unit provides for connection of up to six cameras in
>> +		 * the system and is organized as three identical instances of
>> +		 * two MIPI support blocks, each with a separate 4-lane
>> +		 * interface that can be configured as a single camera with 4
>> +		 * lanes or as a dual camera with 2 lanes available for each
>> +		 * camera.
>> +		 */
>> +		if (port->lanes == 4) {
>> +			cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0,
>> +				  BRICK_CLOCK_A_4X);
>> +
>> +			cil_write(port, (port_num + 1),
> No need for parentheses around "port_num + 1" here and below.
>
>> +				  TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
>> +
>> +			cil_write(port, (port_num + 1),
>> +				  TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
>> +
>> +			cil_write(port, (port_num + 1),
>> +				  TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
>> +
>> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_ENABLE);
>> +		} else {
>> +			u32 val = ((port_num & 1) == PORT_A) ?
>> +				  CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_NOP :
>> +				  CSI_B_PHY_CIL_ENABLE | CSI_A_PHY_CIL_NOP;
>> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +				  val);
>> +		}
>> +
>> +		/* CSI pixel parser registers setup */
>> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_RST);
>> +		pp_write(port, TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK, 0x0);
>> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL0,
>> +			 CSI_PP_PACKET_HEADER_SENT |
>> +			 CSI_PP_DATA_IDENTIFIER_ENABLE |
>> +			 CSI_PP_WORD_COUNT_SELECT_HEADER |
>> +			 CSI_PP_CRC_CHECK_ENABLE |  CSI_PP_WC_CHECK |
>> +			 CSI_PP_OUTPUT_FORMAT_STORE |
>> +			 CSI_PP_HEADER_EC_DISABLE | CSI_PPA_PAD_FRAME_NOPAD |
>> +			 (port_num & 1));
>> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL1,
>> +			 (0x1 << CSI_PP_TOP_FIELD_FRAME_OFFSET) |
>> +			 (0x1 << CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET));
>> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_GAP,
>> +			 0x14 << PP_FRAME_MIN_GAP_OFFSET);
>> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME, 0x0);
>> +		pp_write(port, TEGRA_CSI_INPUT_STREAM_CONTROL,
>> +			 (0x3f << CSI_SKIP_PACKET_THRESHOLD_OFFSET) |
>> +			 (port->lanes - 1));
>> +
>> +		/* TPG setup */
>> +		if (pg_mode) {
>> +			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
>> +				  ((pg_mode - 1) << PG_MODE_OFFSET) |
>> +				  PG_ENABLE);
>> +			tpg_write(port, TEGRA_CSI_PG_PHASE, 0x0);
>> +			tpg_write(port, TEGRA_CSI_PG_RED_FREQ,
>> +				  (0x10 << PG_RED_VERT_INIT_FREQ_OFFSET) |
>> +				  (0x10 << PG_RED_HOR_INIT_FREQ_OFFSET));
>> +			tpg_write(port, TEGRA_CSI_PG_RED_FREQ_RATE, 0x0);
>> +			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ,
>> +				  (0x10 << PG_GREEN_VERT_INIT_FREQ_OFFSET) |
>> +				  (0x10 << PG_GREEN_HOR_INIT_FREQ_OFFSET));
>> +			tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ_RATE, 0x0);
>> +			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ,
>> +				  (0x10 << PG_BLUE_VERT_INIT_FREQ_OFFSET) |
>> +				  (0x10 << PG_BLUE_HOR_INIT_FREQ_OFFSET));
>> +			tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ_RATE, 0x0);
>> +		}
>> +
>> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +			 CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_ENABLE);
>> +	} else {
>> +		u32 val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
>> +
>> +		dev_dbg(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n",
>> +			val);
> Are these still useful? I notice that you don't have debug output for
> the case where enable == true.

Before stopping stream, dumping PP/CIL status register which helps to 
see PP/CIL errors that can occur during the stream.

We don't need this during enable as we start with clearing off all 
errors and any PP/CIL errors happen during the stream gets set till we 
clear them.

>> +
>> +		val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
>> +		dev_dbg(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
>> +
>> +		val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
>> +		dev_dbg(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
>> +
>> +		pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +			 (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +			 CSI_PP_DISABLE);
>> +
>> +		if (pg_mode) {
>> +			tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
>> +				  ((pg_mode - 1) << PG_MODE_OFFSET) |
>> +				  PG_DISABLE);
>> +			clk_disable_unprepare(csi->tpg_clk);
>> +		}
>> +
>> +		if (port->lanes == 4) {
>> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +				  CSI_A_PHY_CIL_DISABLE |
>> +				  CSI_B_PHY_CIL_DISABLE);
>> +
>> +		} else {
>> +			u32 val = ((port_num & 1) == PORT_A) ?
>> +				  CSI_A_PHY_CIL_DISABLE | CSI_B_PHY_CIL_NOP :
>> +				  CSI_B_PHY_CIL_DISABLE | CSI_A_PHY_CIL_NOP;
>> +			csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +				  val);
>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int csi2_hw_init(struct tegra_csi_device *csi)
>> +{
>> +	struct tegra_csi_channel *csi_chan;
>> +	struct tegra_csi_port *port;
>> +	u8 portno;
>> +	int ret;
>> +
>> +	csi->cilab_clk = devm_clk_get(csi->dev, "cilab");
>> +	if (IS_ERR(csi->cilab_clk)) {
>> +		dev_err(csi->dev, "Failed to get cilab clock\n");
> Maybe output the error code here? The important thing here is to make
> error messages consistent, which can simplify analysis of the kernel log
> later on.
WIll fix all error messages.
>> +		return PTR_ERR(csi->cilab_clk);
>> +	}
>> +
>> +	csi->cilcd_clk = devm_clk_get(csi->dev, "cilcd");
>> +	if (IS_ERR(csi->cilcd_clk)) {
>> +		dev_err(csi->dev, "Failed to get cilcd clock\n");
>> +		return PTR_ERR(csi->cilcd_clk);
>> +	}
>> +
>> +	csi->cilef_clk = devm_clk_get(csi->dev, "cile");
>> +	if (IS_ERR(csi->cilef_clk)) {
>> +		dev_err(csi->dev, "Failed to get cile clock\n");
>> +		return PTR_ERR(csi->cilef_clk);
>> +	}
>> +
>> +	csi->tpg_clk = devm_clk_get(csi->dev, "csi_tpg");
>> +	if (IS_ERR(csi->tpg_clk)) {
>> +		dev_err(csi->dev, "Failed to get csi_tpg clock\n");
>> +		return PTR_ERR(csi->tpg_clk);
>> +	}
>> +
>> +	csi->csi_clk = devm_clk_get(csi->dev, "csi");
>> +	if (IS_ERR(csi->csi_clk)) {
>> +		dev_err(csi->dev, "Failed to get csi clock\n");
>> +		return PTR_ERR(csi->csi_clk);
>> +	}
>> +
>> +	ret = clk_prepare_enable(csi->csi_clk);
>> +	if (ret) {
>> +		dev_err(csi->dev, "Failed to enable csi clk, err: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	list_for_each_entry(csi_chan, &csi->csi_chans, list) {
>> +		void __iomem *csi_pp_base;
>> +
>> +		port = csi_chan->ports;
>> +		portno = csi_chan->csi_port_num;
>> +		csi_pp_base = csi->iomem + CSI_PP_OFFSET(portno >> 1);
>> +		port->pixel_parser = csi_pp_base +
>> +				     (portno % CSI_PORTS_PER_BRICK) *
>> +				     TEGRA210_CSI_PORT_OFFSET;
>> +		port->cila = csi_pp_base + TEGRA210_CSI_CIL_OFFSET;
>> +		port->cilb = port->cila + TEGRA210_CSI_PORT_OFFSET;
>> +		port->tpg = port->pixel_parser + TEGRA210_CSI_TPG_OFFSET;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +const struct tegra_csi_fops csi2_fops = {
>> +	.hw_init = csi2_hw_init,
>> +	.csi_start_streaming = csi2_start_streaming,
>> +	.csi_err_status = csi2_error_status,
>> +};
>> +EXPORT_SYMBOL(csi2_fops);
>> diff --git a/drivers/staging/media/tegra/csi2_fops.h b/drivers/staging/media/tegra/csi2_fops.h
>> new file mode 100644
>> index 000000000000..cf22a28ceb1f
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/csi2_fops.h
>> @@ -0,0 +1,15 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __CSI2_H__
>> +#define __CSI2_H__
>> +
>> +#define	TEGRA210_TPG_CLOCK		594000000
>> +#define	TEGRA210_CSI_CIL_CLK_MAX	102000000
>> +#define TEGRA210_CSI_BRICKS_MAX		3
>> +
>> +extern const struct tegra_csi_fops csi2_fops;
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
>> new file mode 100644
>> index 000000000000..740806121e6b
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/host1x-video.c
>> @@ -0,0 +1,120 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/host1x.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "host1x-video.h"
>> +
>> +static int host1x_video_probe(struct host1x_device *dev)
>> +{
>> +	struct tegra_camera *cam;
>> +	int ret;
>> +
>> +	cam = devm_kzalloc(&dev->dev, sizeof(*cam), GFP_KERNEL);
>> +	if (!cam)
>> +		return -ENOMEM;
>> +
>> +	cam->dev = get_device(&dev->dev);
>> +	cam->media_dev.dev = cam->dev;
>> +	strscpy(cam->media_dev.model, "NVIDIA Tegra Video Input Device",
>> +		sizeof(cam->media_dev.model));
>> +	cam->media_dev.hw_revision = 3;
> Where does this come from?
>
>> +
>> +	media_device_init(&cam->media_dev);
>> +	ret = media_device_register(&cam->media_dev);
>> +	if (ret < 0) {
>> +		dev_err(cam->dev, "failed to register media device: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	cam->v4l2_dev.mdev = &cam->media_dev;
>> +	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
>> +	if (ret < 0) {
>> +		dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
>> +		goto register_error;
>> +	}
>> +
>> +	dev_set_drvdata(&dev->dev, cam);
>> +
>> +	ret = host1x_device_init(dev);
>> +	if (ret < 0)
>> +		goto dev_exit;
>> +
>> +	return 0;
>> +
>> +dev_exit:
>> +	host1x_device_exit(dev);
> There should be no need to call host1x_device_exit() when
> host1x_device_init() failed because the latter already takes care of
> undoing whatever it did already.
>
host1x_device_init can fail if any of its client ops init fails.

So, calling host1x_device_exit here to undo the things done in other 
successful client init ops.

>> +	v4l2_device_unregister(&cam->v4l2_dev);
>> +register_error:
>> +	media_device_unregister(&cam->media_dev);
>> +	media_device_cleanup(&cam->media_dev);
>> +
>> +	return ret;
>> +}
>> +
>> +static int host1x_video_remove(struct host1x_device *dev)
>> +{
>> +	struct tegra_camera *cam = dev_get_drvdata(&dev->dev);
>> +
>> +	host1x_device_exit(dev);
>> +	v4l2_device_unregister(&cam->v4l2_dev);
>> +	media_device_unregister(&cam->media_dev);
>> +	media_device_cleanup(&cam->media_dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id host1x_video_subdevs[] = {
>> +	{ .compatible = "nvidia,tegra210-csi", },
>> +	{ .compatible = "nvidia,tegra210-vi", },
>> +	{ }
>> +};
>> +
>> +static struct host1x_driver host1x_video_driver = {
>> +	.driver = {
>> +		.name = "host1x_video",
> We typically use - instead of _ in names. This helps making access to
> sysfs or debugfs consistent across drivers.
Will change
>> +	},
>> +	.probe = host1x_video_probe,
>> +	.remove = host1x_video_remove,
>> +	.subdevs = host1x_video_subdevs,
>> +};
>> +
>> +static struct platform_driver * const drivers[] = {
>> +	&tegra_csi_driver,
>> +	&tegra_vi_driver,
>> +};
>> +
>> +static int __init host1x_video_init(void)
>> +{
>> +	int err;
>> +
>> +	err = host1x_driver_register(&host1x_video_driver);
>> +	if (err < 0)
>> +		return err;
>> +
>> +	err = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
>> +	if (err < 0)
>> +		goto unregister_host1x;
>> +
>> +	return 0;
>> +
>> +unregister_host1x:
>> +	host1x_driver_unregister(&host1x_video_driver);
>> +	return err;
>> +}
>> +module_init(host1x_video_init);
>> +
>> +static void __exit host1x_video_exit(void)
>> +{
>> +	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
>> +	host1x_driver_unregister(&host1x_video_driver);
>> +}
>> +module_exit(host1x_video_exit);
>> +
>> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
>> +MODULE_DESCRIPTION("NVIDIA Tegra Host1x Video driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>> new file mode 100644
>> index 000000000000..84d28e6f4362
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/host1x-video.h
>> @@ -0,0 +1,33 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef HOST1X_VIDEO_H
>> +#define HOST1X_VIDEO_H 1
>> +
>> +#include <linux/host1x.h>
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +#include "tegra-vi.h"
>> +#include "csi.h"
>> +
>> +struct tegra_camera {
> Nit: "camera" seems like a suboptimal choice because usually VI will
> consume data from multiple cameras. Maybe something like "tegra_video"
> would be a better name?
Will change
>
>> +	struct v4l2_device v4l2_dev;
>> +	struct media_device media_dev;
>> +	struct device *dev;
>> +	struct tegra_vi *vi;
>> +	struct tegra_csi_device *csi;
>> +};
>> +
>> +extern struct platform_driver tegra_vi_driver;
>> +extern struct platform_driver tegra_csi_driver;
>> +
>> +#endif /* HOST1X_VIDEO_H */
> [...]
>> diff --git a/drivers/staging/media/tegra/tegra-channel.c b/drivers/staging/media/tegra/tegra-channel.c
>> new file mode 100644
>> index 000000000000..7561f6fb8748
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-channel.c
>> @@ -0,0 +1,628 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/atomic.h>
>> +#include <linux/bitmap.h>
>> +#include <linux/clk.h>
>> +#include <linux/host1x.h>
>> +#include <linux/kthread.h>
>> +#include <linux/lcm.h>
>> +#include <linux/list.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +
>> +#include <media/v4l2-event.h>
>> +#include <media/v4l2-fh.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-dma-contig.h>
>> +
>> +#include <soc/tegra/pmc.h>
>> +
>> +#include "mc_common.h"
>> +#include "tegra-vi.h"
>> +#include "host1x-video.h"
>> +
>> +#define MAX_CID_CONTROLS		1
>> +
>> +static const char *const vi_pattern_strings[] = {
>> +	"Black/White Direct Mode",
>> +	"Color Patch Mode",
>> +};
>> +
>> +static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> +	struct tegra_channel *chan = container_of(ctrl->handler,
>> +						  struct tegra_channel,
>> +						  ctrl_handler);
>> +
>> +	switch (ctrl->id) {
>> +	case V4L2_CID_TEST_PATTERN:
>> +		chan->vi->pg_mode = ctrl->val + 1;
>> +		dev_info(chan->vi->dev, "TPG mode is set to %s\n",
>> +			 vi_pattern_strings[ctrl->val]);
> dev_dbg()?
>
>> +		break;
>> +
>> +	default:
>> +		dev_err(chan->vi->dev, "Invalid Tegra video control\n");
> That potentially allows an attacker to DoS by flooding the kernel log.
> Isn't the -EINVAL below already going to provide enough information to
> the caller? If we really want this, perhaps turn it into a dev_dbg() or
> even better yet, a rate-limited dev_dbg().
>
>> +		return -EINVAL;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
> [...]
>> diff --git a/drivers/staging/media/tegra/vi2_fops.c b/drivers/staging/media/tegra/vi2_fops.c
> [...]
>> +const struct tegra_vi_fops vi2_fops = {
>> +	.vi_stride_align = vi2_stride_align,
>> +	.vi_start_streaming = vi2_channel_start_streaming,
>> +	.vi_stop_streaming = vi2_channel_stop_streaming,
>> +};
>> +EXPORT_SYMBOL(vi2_fops);
> There should be no need to export this, unless you want to build this as
> a separate module, which I don't think is a good idea.
Will remove export.
>> diff --git a/drivers/staging/media/tegra/vi2_fops.h b/drivers/staging/media/tegra/vi2_fops.h
>> new file mode 100644
>> index 000000000000..dcbd3ad4b642
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/vi2_fops.h
>> @@ -0,0 +1,15 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __T210_VI_H__
>> +#define __T210_VI_H__
>> +
>> +#define	TEGRA210_CLOCK_VI_MAX			460000000
>> +
>> +#define	TEGRA_VI_CSI_BASE(x)			(0x100 + (x) * 0x100)
>> +
>> +extern const struct tegra_vi_fops vi2_fops;
>> +
>> +#endif
> I've been wondering about this. So far we've got two pairs of Tegra210
> specific files: vi2_fops.[ch] and csi2_fops.[ch]. Is there any reason
> why we couldn't merge those two files into a single file, say,
> tegra210.c?
>
> I don't think a header file would be really necessary in that case since
> only the tegra210.c file would use any of the definitions in that header
> and we coul simply put the "extern" definitions into some central
> location to make them available to the main driver.
>
> These files aren't terribly huge, so merging them should result in still
> fairly manageable chunks.

Yes, we can use single file for all Tegra210 CSI and VI fops.

Will change in v2.

>> diff --git a/drivers/staging/media/tegra/vi2_formats.h b/drivers/staging/media/tegra/vi2_formats.h
>> new file mode 100644
>> index 000000000000..416960b1c1f2
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/vi2_formats.h
>> @@ -0,0 +1,119 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __VI2_FORMATS_H_
>> +#define __VI2_FORMATS_H_
>> +
>> +#include "tegra-core.h"
>> +
>> +/*
>> + * These go into the TEGRA_VI_CSI_n_IMAGE_DEF registers bits 23:16
>> + * Output pixel memory format for the VI channel.
>> + */
>> +enum tegra_image_format {
>> +	TEGRA_IMAGE_FORMAT_T_L8 = 16,
>> +
>> +	TEGRA_IMAGE_FORMAT_T_R16_I = 32,
>> +	TEGRA_IMAGE_FORMAT_T_B5G6R5,
>> +	TEGRA_IMAGE_FORMAT_T_R5G6B5,
>> +	TEGRA_IMAGE_FORMAT_T_A1B5G5R5,
>> +	TEGRA_IMAGE_FORMAT_T_A1R5G5B5,
>> +	TEGRA_IMAGE_FORMAT_T_B5G5R5A1,
>> +	TEGRA_IMAGE_FORMAT_T_R5G5B5A1,
>> +	TEGRA_IMAGE_FORMAT_T_A4B4G4R4,
>> +	TEGRA_IMAGE_FORMAT_T_A4R4G4B4,
>> +	TEGRA_IMAGE_FORMAT_T_B4G4R4A4,
>> +	TEGRA_IMAGE_FORMAT_T_R4G4B4A4,
>> +
>> +	TEGRA_IMAGE_FORMAT_T_A8B8G8R8 = 64,
>> +	TEGRA_IMAGE_FORMAT_T_A8R8G8B8,
>> +	TEGRA_IMAGE_FORMAT_T_B8G8R8A8,
>> +	TEGRA_IMAGE_FORMAT_T_R8G8B8A8,
>> +	TEGRA_IMAGE_FORMAT_T_A2B10G10R10,
>> +	TEGRA_IMAGE_FORMAT_T_A2R10G10B10,
>> +	TEGRA_IMAGE_FORMAT_T_B10G10R10A2,
>> +	TEGRA_IMAGE_FORMAT_T_R10G10B10A2,
>> +
>> +	TEGRA_IMAGE_FORMAT_T_A8Y8U8V8 = 193,
>> +	TEGRA_IMAGE_FORMAT_T_V8U8Y8A8,
>> +
>> +	TEGRA_IMAGE_FORMAT_T_A2Y10U10V10 = 197,
>> +	TEGRA_IMAGE_FORMAT_T_V10U10Y10A2,
>> +	TEGRA_IMAGE_FORMAT_T_Y8_U8__Y8_V8,
>> +	TEGRA_IMAGE_FORMAT_T_Y8_V8__Y8_U8,
>> +	TEGRA_IMAGE_FORMAT_T_U8_Y8__V8_Y8,
>> +	TEGRA_IMAGE_FORMAT_T_V8_Y8__U8_Y8,
>> +
>> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N444 = 224,
>> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N444,
>> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N444,
>> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N422,
>> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N422,
>> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N422,
>> +	TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N420,
>> +	TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N420,
>> +	TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N420,
>> +	TEGRA_IMAGE_FORMAT_T_X2LC10LB10LA10,
>> +	TEGRA_IMAGE_FORMAT_T_A2R6R6R6R6R6,
>> +};
>> +
>> +static const struct tegra_video_format vi2_video_formats[] = {
>> +	/* RAW 8 */
>> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SRGGB8_1X8, 1, 1, T_L8,
>> +			   RAW8, SRGGB8, "RGRG.. GBGB.."),
>> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SGRBG8_1X8, 1, 1, T_L8,
>> +			   RAW8, SGRBG8, "GRGR.. BGBG.."),
>> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SGBRG8_1X8, 1, 1, T_L8,
>> +			   RAW8, SGBRG8, "GBGB.. RGRG.."),
>> +	TEGRA_VIDEO_FORMAT(RAW8, 8, SBGGR8_1X8, 1, 1, T_L8,
>> +			   RAW8, SBGGR8, "BGBG.. GRGR.."),
>> +
>> +	/* RAW 10 */
>> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SRGGB10_1X10, 2, 1, T_R16_I,
>> +			   RAW10, SRGGB10, "RGRG.. GBGB.."),
>> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SGRBG10_1X10, 2, 1, T_R16_I,
>> +			   RAW10, SGRBG10, "GRGR.. BGBG.."),
>> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SGBRG10_1X10, 2, 1, T_R16_I,
>> +			   RAW10, SGBRG10, "GBGB.. RGRG.."),
>> +	TEGRA_VIDEO_FORMAT(RAW10, 10, SBGGR10_1X10, 2, 1, T_R16_I,
>> +			   RAW10, SBGGR10, "BGBG.. GRGR.."),
>> +
>> +	/* RAW 12 */
>> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SRGGB12_1X12, 2, 1, T_R16_I,
>> +			   RAW12, SRGGB12, "RGRG.. GBGB.."),
>> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SGRBG12_1X12, 2, 1, T_R16_I,
>> +			   RAW12, SGRBG12, "GRGR.. BGBG.."),
>> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SGBRG12_1X12, 2, 1, T_R16_I,
>> +			   RAW12, SGBRG12, "GBGB.. RGRG.."),
>> +	TEGRA_VIDEO_FORMAT(RAW12, 12, SBGGR12_1X12, 2, 1, T_R16_I,
>> +			   RAW12, SBGGR12, "BGBG.. GRGR.."),
>> +
>> +	/* RGB888 */
>> +	TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X24, 4, 1, T_A8R8G8B8,
>> +			   RGB888, ABGR32, "BGRA-8-8-8-8"),
>> +	TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X32_PADHI, 4, 1, T_A8B8G8R8,
>> +			   RGB888, RGB32, "RGB-8-8-8-8"),
>> +
>> +	/* YUV422 */
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 2, 1, T_U8_Y8__V8_Y8,
>> +			   YUV422_8, UYVY, "YUV 4:2:2"),
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_1X16, 2, 1, T_V8_Y8__U8_Y8,
>> +			   YUV422_8, VYUY, "YUV 4:2:2"),
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_1X16, 2, 1, T_Y8_U8__Y8_V8,
>> +			   YUV422_8, YUYV, "YUV 4:2:2"),
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_1X16, 2, 1, T_Y8_V8__Y8_U8,
>> +			   YUV422_8, YVYU, "YUV 4:2:2"),
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 1, 1, T_Y8__V8U8_N422,
>> +			   YUV422_8, NV16, "NV16"),
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_2X8, 2, 1, T_U8_Y8__V8_Y8,
>> +			   YUV422_8, UYVY, "YUV 4:2:2 UYVY"),
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_2X8, 2, 1, T_V8_Y8__U8_Y8,
>> +			   YUV422_8, VYUY, "YUV 4:2:2 VYUY"),
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_2X8, 2, 1, T_Y8_U8__Y8_V8,
>> +			   YUV422_8, YUYV, "YUV 4:2:2 YUYV"),
>> +	TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_2X8, 2, 1, T_Y8_V8__Y8_U8,
>> +			   YUV422_8, YVYU, "YUV 4:2:2 YVYU"),
>> +};
> Does this table perhaps also belong in tegra210.c?

vi2_formats.h is for Tegra210 specific video formats.

Yes we can merge csi fops, vi fops, Tegra210 specific video formats all 
into single file.

Will update in v2.

>
>> +#endif
>> diff --git a/drivers/staging/media/tegra/vi2_registers.h b/drivers/staging/media/tegra/vi2_registers.h
>> new file mode 100644
>> index 000000000000..c54a6a3aa1c4
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/vi2_registers.h
>> @@ -0,0 +1,194 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __REGISTERS_H__
>> +#define __REGISTERS_H__
>> +
>> +#define	TEGRA_CLOCK_VI_MAX				793600000
>> +#define	TEGRA210_SURFACE_ALIGNMENT			64
>> +#define TEGRA210_MAX_CHANNELS				6
>> +
>> +/* Tegra210 VI registers */
> If these are Tegra210-specific, are they accessed outside of Tegra210-
> specific code? If not, they may be better located in that new tegra210.c
> source file as well. That way it becomes a lot easier to distinguish
> between generic, perhaps parameterized, core code and the SoC generation
> specific code.
>
> Thierry

Yes they are T210 specific and not accessed outside of T210 code. Will 
move them to new single file.


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 14:16   ` Hans Verkuil (hansverk)
@ 2020-01-29 17:27     ` Sowjanya Komatineni
  0 siblings, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29 17:27 UTC (permalink / raw)
  To: Hans Verkuil (hansverk), thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Thanks Hans. Will fix in v2 based on below feedback.

On 1/29/20 6:16 AM, Hans Verkuil (hansverk) wrote:
> External email: Use caution opening links or attachments
>
>
> Hi Sowjanya,
>
> Thank you very much for working on this! Much appreciated.
>
> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
>> Tegra210 contains a powerful Video Input (VI) hardware controller
>> which can support up to 6 MIPI CSI camera sensors.
>>
>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>> capture from an external camera sensor connected to CSI or from
>> built-in test pattern generator.
>>
>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>
>> This patch adds a V4L2 media controller and capture driver support
>> for Tegra210 built-in CSI to VI test pattern generator.
>>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>> ---
>>   drivers/staging/media/Kconfig               |   2 +
>>   drivers/staging/media/Makefile              |   1 +
>>   drivers/staging/media/tegra/Kconfig         |  12 +
>>   drivers/staging/media/tegra/Makefile        |  11 +
>>   drivers/staging/media/tegra/TODO            |  10 +
>>   drivers/staging/media/tegra/csi.h           | 111 +++++
>>   drivers/staging/media/tegra/csi2_fops.c     | 335 +++++++++++++++
>>   drivers/staging/media/tegra/csi2_fops.h     |  15 +
> These three files...
>
>>   drivers/staging/media/tegra/host1x-video.c  | 120 ++++++
>>   drivers/staging/media/tegra/host1x-video.h  |  33 ++
>>   drivers/staging/media/tegra/mc_common.h     | 131 ++++++
> ...and this one are a bit too generic. It is good practice to prefix headers
> with something unique, e.g. tegra-csi.h etc.
>
> For example, sunxi has sun6i_csi.h and sun4i_csi.h.
>
>>   drivers/staging/media/tegra/tegra-channel.c | 628 ++++++++++++++++++++++++++++
>>   drivers/staging/media/tegra/tegra-core.c    | 111 +++++
>>   drivers/staging/media/tegra/tegra-core.h    | 125 ++++++
>>   drivers/staging/media/tegra/tegra-csi.c     | 380 +++++++++++++++++
>>   drivers/staging/media/tegra/tegra-vi.c      | 351 ++++++++++++++++
>>   drivers/staging/media/tegra/tegra-vi.h      | 101 +++++
>>   drivers/staging/media/tegra/vi2_fops.c      | 364 ++++++++++++++++
>>   drivers/staging/media/tegra/vi2_fops.h      |  15 +
>>   drivers/staging/media/tegra/vi2_formats.h   | 119 ++++++
>>   drivers/staging/media/tegra/vi2_registers.h | 194 +++++++++
>>   21 files changed, 3169 insertions(+)
>>   create mode 100644 drivers/staging/media/tegra/Kconfig
>>   create mode 100644 drivers/staging/media/tegra/Makefile
>>   create mode 100644 drivers/staging/media/tegra/TODO
>>   create mode 100644 drivers/staging/media/tegra/csi.h
>>   create mode 100644 drivers/staging/media/tegra/csi2_fops.c
>>   create mode 100644 drivers/staging/media/tegra/csi2_fops.h
>>   create mode 100644 drivers/staging/media/tegra/host1x-video.c
>>   create mode 100644 drivers/staging/media/tegra/host1x-video.h
>>   create mode 100644 drivers/staging/media/tegra/mc_common.h
>>   create mode 100644 drivers/staging/media/tegra/tegra-channel.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-core.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-core.h
>>   create mode 100644 drivers/staging/media/tegra/tegra-csi.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-vi.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-vi.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_fops.c
>>   create mode 100644 drivers/staging/media/tegra/vi2_fops.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_formats.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_registers.h
>>
>> diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
>> index c394abffea86..e367030d4407 100644
>> --- a/drivers/staging/media/Kconfig
>> +++ b/drivers/staging/media/Kconfig
>> @@ -34,6 +34,8 @@ source "drivers/staging/media/sunxi/Kconfig"
>>
>>   source "drivers/staging/media/tegra-vde/Kconfig"
>>
>> +source "drivers/staging/media/tegra/Kconfig"
>> +
>>   source "drivers/staging/media/ipu3/Kconfig"
>>
>>   source "drivers/staging/media/soc_camera/Kconfig"
>> diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
>> index ea9fce8014bb..67a22ac709e8 100644
>> --- a/drivers/staging/media/Makefile
>> +++ b/drivers/staging/media/Makefile
>> @@ -10,3 +10,4 @@ obj-$(CONFIG_VIDEO_IPU3_IMGU)       += ipu3/
>>   obj-$(CONFIG_SOC_CAMERA)     += soc_camera/
>>   obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0)  += phy-rockchip-dphy-rx0/
>>   obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1)    += rkisp1/
>> +obj-$(CONFIG_VIDEO_TEGRA)    += tegra/
>> diff --git a/drivers/staging/media/tegra/Kconfig b/drivers/staging/media/tegra/Kconfig
>> new file mode 100644
>> index 000000000000..443b99f2e2c9
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/Kconfig
>> @@ -0,0 +1,12 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +config VIDEO_TEGRA
>> +     tristate "NVIDIA Tegra VI driver"
>> +     depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
>> +     depends on COMMON_CLK
>> +     depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
>> +     depends on MEDIA_CONTROLLER
>> +     select TEGRA_HOST1X
>> +     select VIDEOBUF2_DMA_CONTIG
>> +     select V4L2_FWNODE
>> +     help
>> +       Say yes here to enable support for Tegra video input hardware
>> diff --git a/drivers/staging/media/tegra/Makefile b/drivers/staging/media/tegra/Makefile
>> new file mode 100644
>> index 000000000000..003d23444d49
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/Makefile
>> @@ -0,0 +1,11 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +tegra-video-y := \
>> +             host1x-video.o \
>> +             tegra-channel.o \
>> +             tegra-core.o \
>> +             csi2_fops.o \
>> +             vi2_fops.o \
>> +             tegra-vi.o \
>> +             tegra-csi.o
>> +
>> +obj-$(CONFIG_VIDEO_TEGRA) += tegra-video.o
>> diff --git a/drivers/staging/media/tegra/TODO b/drivers/staging/media/tegra/TODO
>> new file mode 100644
>> index 000000000000..d7d64b13535e
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/TODO
>> @@ -0,0 +1,10 @@
>> +TODO list
>> +* Currently driver supports Tegra build-in TPG Only with direct media links from CSI to VI.
>> +  Update the driver to do TPG Vs Sensor media links based on the kernel config CONFIG_VIDEO_TEGRA_TPG.
>> +* Add real camera sensor capture support
>> +* Add RAW10 packed video format support to Tegra210 video formats
>> +* Add Tegra CSI MIPI pads calibration
>> +* Add MIPI clock Settle time computation based on the data rate
>> +* Add support for Ganged mode
>> +* Make sure v4l2-compliance tests pass with all of the above implementations.
>> +* Add SMMU support for VI to avoid cma_alloc failures with higher resolutions of some video formats.
>> diff --git a/drivers/staging/media/tegra/csi.h b/drivers/staging/media/tegra/csi.h
>> new file mode 100644
>> index 000000000000..81cdda4b6bdd
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/csi.h
>> @@ -0,0 +1,111 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __CSI_H_
>> +#define __CSI_H_
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +/*
>> + * Each CSI brick supports max of 4 lanes that can be used as either
>> + * one x4 port using both CILA and CILB partitions of a CSI brick or can
>> + * be used as two x2 ports with one x2 from CILA and the other x2 from
>> + * CILB.
>> + */
>> +#define CSI_LANES_PER_BRICK  4
>> +#define CSI_PORTS_PER_BRICK  2
>> +
>> +/* each CSI channel can have one sink and one source pads */
>> +#define TEGRA_CSI_PADS_NUM   2
>> +
>> +enum tegra_csi_cil_port {
>> +     PORT_A = 0,
>> +     PORT_B,
>> +};
>> +
>> +enum tegra_csi_block {
>> +     CSI_CIL_AB = 0,
>> +     CSI_CIL_CD,
>> +     CSI_CIL_EF,
>> +};
>> +
>> +struct tegra_csi_device;
>> +
>> +struct tegra_csi_port {
>> +     void __iomem *pixel_parser;
>> +     void __iomem *cila;
>> +     void __iomem *cilb;
>> +     void __iomem *tpg;
>> +
>> +     /* one pair of sink/source pad has one format */
>> +     struct v4l2_mbus_framefmt format;
>> +     unsigned int lanes;
>> +};
>> +
>> +struct tegra_csi_channel {
>> +     struct list_head list;
>> +     struct v4l2_subdev subdev;
>> +     struct media_pad pads[TEGRA_CSI_PADS_NUM];
>> +     struct device_node *of_node;
>> +     struct tegra_csi_device *csi;
>> +     struct tegra_csi_port *ports;
>> +     unsigned int numlanes;
>> +     unsigned int numpads;
>> +     u8 csi_port_num;
>> +
>> +     /* protects csi channel ports format fields */
>> +     struct mutex format_lock;
>> +};
>> +
>> +struct tegra_csi_soc_data {
>> +     const struct tegra_csi_fops *csi_fops;
>> +     unsigned int cil_max_clk_hz;
>> +     unsigned int num_tpg_channels;
>> +};
>> +
>> +/**
>> + * struct tegra_csi_device - NVIDIA Tegra CSI device structure
>> + * @dev: device struct
>> + * @client: host1x_client struct
>> + *
>> + * @iomem: register base
>> + * @csi_clk: clock for CSI
>> + * @cilab_clk: clock for CIL AB
>> + * @cilcd_clk: clock for CIL CD
>> + * @cilef_clk: clock for CIL EF
>> + * @tpg_clk: clock for internal CSI TPG logic
>> + *
>> + * @soc_data: pointer to SoC data structure
>> + * @fops: csi operations
>> + *
>> + * @channels: list of CSI channels
>> + */
>> +struct tegra_csi_device {
>> +     struct device *dev;
>> +     struct host1x_client client;
>> +
>> +     void __iomem *iomem;
>> +     struct clk *csi_clk;
>> +     struct clk *cilab_clk;
>> +     struct clk *cilcd_clk;
>> +     struct clk *cilef_clk;
>> +     struct clk *tpg_clk;
>> +     atomic_t clk_refcnt;
>> +
>> +     const struct tegra_csi_soc_data *soc_data;
>> +     const struct tegra_csi_fops *fops;
>> +
>> +     struct list_head csi_chans;
>> +};
>> +
>> +void tegra_csi_error_status(struct v4l2_subdev *subdev);
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/csi2_fops.c b/drivers/staging/media/tegra/csi2_fops.c
>> new file mode 100644
>> index 000000000000..5f2f7bd3ae50
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/csi2_fops.c
>> @@ -0,0 +1,335 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk/tegra.h>
>> +#include <linux/delay.h>
>> +
>> +#include "vi2_registers.h"
>> +#include "mc_common.h"
>> +#include "csi2_fops.h"
>> +#include "csi.h"
>> +
>> +/* CSI block registers offset */
>> +#define TEGRA210_CSI_PORT_OFFSET             0x34
>> +/* CSI CIL parition registers offset */
>> +#define TEGRA210_CSI_CIL_OFFSET                      0x0f4
>> +/* CSI TPG registers offset */
>> +#define TEGRA210_CSI_TPG_OFFSET                      0x18c
>> +
>> +#define CSI_PP_OFFSET(block) ((block) * 0x800)
>> +
>> +static void csi_write(struct tegra_csi_channel *chan, u8 block,
>> +                   unsigned int addr, u32 val)
>> +{
>> +     void __iomem *csi_pp_base;
>> +
>> +     csi_pp_base = chan->csi->iomem + CSI_PP_OFFSET(block);
>> +     writel(val, csi_pp_base + addr);
>> +}
>> +
>> +/* Pixel parser registers accessors */
>> +static void pp_write(struct tegra_csi_port *port, u32 addr, u32 val)
>> +{
>> +     writel(val, port->pixel_parser + addr);
>> +}
>> +
>> +static u32 pp_read(struct tegra_csi_port *port, u32 addr)
>> +{
>> +     return readl(port->pixel_parser + addr);
>> +}
>> +
>> +/* CSI CIL A/B port registers accessors */
>> +static void cil_write(struct tegra_csi_port *port, u8 port_id,
>> +                   u32 addr, u32 val)
>> +{
>> +     if (port_id & PORT_B)
>> +             writel(val, port->cilb + addr);
>> +     else
>> +             writel(val, port->cila + addr);
>> +}
>> +
>> +static u32 cil_read(struct tegra_csi_port *port, u8 port_id,
>> +                 u32 addr)
>> +{
>> +     if (port_id & PORT_B)
>> +             return readl(port->cilb + addr);
>> +     else
>> +             return readl(port->cila + addr);
>> +}
>> +
>> +/* Test pattern generator registers accessor */
>> +static void tpg_write(struct tegra_csi_port *port, unsigned int addr, u32 val)
>> +{
>> +     writel(val, port->tpg + addr);
>> +}
>> +
>> +static void csi2_error_status(struct tegra_csi_channel *csi_chan)
>> +{
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +     unsigned int port_num = csi_chan->csi_port_num;
>> +     struct tegra_csi_port *port = csi_chan->ports;
>> +     u32 val;
>> +
>> +     val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
>> +     dev_err(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n", val);
>> +
>> +     val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
>> +     dev_err(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
>> +
>> +     val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
>> +     dev_err(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
>> +}
>> +
>> +static int csi2_start_streaming(struct tegra_csi_channel *csi_chan,
>> +                             u8 pg_mode, int enable)
>> +{
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +     unsigned int port_num = csi_chan->csi_port_num;
>> +     unsigned int block = port_num >> 1;
>> +     struct tegra_csi_port *port = csi_chan->ports;
>> +     unsigned int cil_max_freq = csi->soc_data->cil_max_clk_hz;
>> +     struct clk *cil_clk;
>> +     int ret;
>> +
>> +     if (block == CSI_CIL_AB)
>> +             cil_clk = csi->cilab_clk;
>> +     else if (block == CSI_CIL_CD)
>> +             cil_clk = csi->cilcd_clk;
>> +     else
>> +             cil_clk = csi->cilef_clk;
>> +
>> +     if (enable) {
>> +             ret = clk_set_rate(cil_clk, cil_max_freq);
>> +             if (ret)
>> +                     dev_err(csi->dev,
>> +                             "failed to set cil clk rate, err: %d\n", ret);
>> +
>> +             /* enable CIL clock on first open */
>> +             if (atomic_add_return(1, &csi->clk_refcnt) == 1) {
>> +                     ret = clk_prepare_enable(cil_clk);
>> +                     if (ret) {
>> +                             dev_err(csi->dev,
>> +                                     "failed to enable cil clk, err: %d\n",
>> +                                     ret);
>> +                             return ret;
>> +                     }
>> +             }
>> +
>> +             /*
>> +              * On Tegra210, TPG internal logic uses PLLD out along with
>> +              * the CIL clock.
>> +              * So, enable TPG clock during TPG mode streaming.
>> +              */
>> +             if (pg_mode) {
>> +                     ret = clk_set_rate(csi->tpg_clk, TEGRA210_TPG_CLOCK);
>> +                     if (ret)
>> +                             dev_err(csi->dev,
>> +                                     "failed to set tpg clk rate\n");
>> +
>> +                     ret = clk_prepare_enable(csi->tpg_clk);
>> +                     if (ret) {
>> +                             dev_err(csi->dev,
>> +                                     "failed to enable tpg clk, err: %d\n",
>> +                                     ret);
>> +                             return ret;
>> +                     }
>> +             }
>> +
>> +             csi_write(csi_chan, block, TEGRA_CSI_CLKEN_OVERRIDE, 0);
>> +
>> +             /* clean up status */
>> +             pp_write(port, TEGRA_CSI_PIXEL_PARSER_STATUS, 0xFFFFFFFF);
>> +             cil_write(port, port_num, TEGRA_CSI_CIL_STATUS, 0xFFFFFFFF);
>> +             cil_write(port, port_num, TEGRA_CSI_CILX_STATUS, 0xFFFFFFFF);
>> +             cil_write(port, port_num, TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
>> +
>> +             /* CIL PHY registers setup */
>> +             cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
>> +             cil_write(port, port_num, TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
>> +
>> +             /*
>> +              * The CSI unit provides for connection of up to six cameras in
>> +              * the system and is organized as three identical instances of
>> +              * two MIPI support blocks, each with a separate 4-lane
>> +              * interface that can be configured as a single camera with 4
>> +              * lanes or as a dual camera with 2 lanes available for each
>> +              * camera.
>> +              */
>> +             if (port->lanes == 4) {
>> +                     cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0,
>> +                               BRICK_CLOCK_A_4X);
>> +
>> +                     cil_write(port, (port_num + 1),
>> +                               TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
>> +
>> +                     cil_write(port, (port_num + 1),
>> +                               TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
>> +
>> +                     cil_write(port, (port_num + 1),
>> +                               TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
>> +
>> +                     csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +                               CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_ENABLE);
>> +             } else {
>> +                     u32 val = ((port_num & 1) == PORT_A) ?
>> +                               CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_NOP :
>> +                               CSI_B_PHY_CIL_ENABLE | CSI_A_PHY_CIL_NOP;
>> +                     csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +                               val);
>> +             }
>> +
>> +             /* CSI pixel parser registers setup */
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +                      (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +                      CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_RST);
>> +             pp_write(port, TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK, 0x0);
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL0,
>> +                      CSI_PP_PACKET_HEADER_SENT |
>> +                      CSI_PP_DATA_IDENTIFIER_ENABLE |
>> +                      CSI_PP_WORD_COUNT_SELECT_HEADER |
>> +                      CSI_PP_CRC_CHECK_ENABLE |  CSI_PP_WC_CHECK |
>> +                      CSI_PP_OUTPUT_FORMAT_STORE |
>> +                      CSI_PP_HEADER_EC_DISABLE | CSI_PPA_PAD_FRAME_NOPAD |
>> +                      (port_num & 1));
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL1,
>> +                      (0x1 << CSI_PP_TOP_FIELD_FRAME_OFFSET) |
>> +                      (0x1 << CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET));
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_GAP,
>> +                      0x14 << PP_FRAME_MIN_GAP_OFFSET);
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME, 0x0);
>> +             pp_write(port, TEGRA_CSI_INPUT_STREAM_CONTROL,
>> +                      (0x3f << CSI_SKIP_PACKET_THRESHOLD_OFFSET) |
>> +                      (port->lanes - 1));
>> +
>> +             /* TPG setup */
>> +             if (pg_mode) {
>> +                     tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
>> +                               ((pg_mode - 1) << PG_MODE_OFFSET) |
>> +                               PG_ENABLE);
>> +                     tpg_write(port, TEGRA_CSI_PG_PHASE, 0x0);
>> +                     tpg_write(port, TEGRA_CSI_PG_RED_FREQ,
>> +                               (0x10 << PG_RED_VERT_INIT_FREQ_OFFSET) |
>> +                               (0x10 << PG_RED_HOR_INIT_FREQ_OFFSET));
>> +                     tpg_write(port, TEGRA_CSI_PG_RED_FREQ_RATE, 0x0);
>> +                     tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ,
>> +                               (0x10 << PG_GREEN_VERT_INIT_FREQ_OFFSET) |
>> +                               (0x10 << PG_GREEN_HOR_INIT_FREQ_OFFSET));
>> +                     tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ_RATE, 0x0);
>> +                     tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ,
>> +                               (0x10 << PG_BLUE_VERT_INIT_FREQ_OFFSET) |
>> +                               (0x10 << PG_BLUE_HOR_INIT_FREQ_OFFSET));
>> +                     tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ_RATE, 0x0);
>> +             }
>> +
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +                      (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +                      CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_ENABLE);
>> +     } else {
>> +             u32 val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
>> +
>> +             dev_dbg(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n",
>> +                     val);
>> +
>> +             val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
>> +             dev_dbg(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
>> +
>> +             val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
>> +             dev_dbg(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
>> +
>> +             pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
>> +                      (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
>> +                      CSI_PP_DISABLE);
>> +
>> +             if (pg_mode) {
>> +                     tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
>> +                               ((pg_mode - 1) << PG_MODE_OFFSET) |
>> +                               PG_DISABLE);
>> +                     clk_disable_unprepare(csi->tpg_clk);
>> +             }
>> +
>> +             if (port->lanes == 4) {
>> +                     csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +                               CSI_A_PHY_CIL_DISABLE |
>> +                               CSI_B_PHY_CIL_DISABLE);
>> +
>> +             } else {
>> +                     u32 val = ((port_num & 1) == PORT_A) ?
>> +                               CSI_A_PHY_CIL_DISABLE | CSI_B_PHY_CIL_NOP :
>> +                               CSI_B_PHY_CIL_DISABLE | CSI_A_PHY_CIL_NOP;
>> +                     csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
>> +                               val);
>> +             }
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int csi2_hw_init(struct tegra_csi_device *csi)
>> +{
>> +     struct tegra_csi_channel *csi_chan;
>> +     struct tegra_csi_port *port;
>> +     u8 portno;
>> +     int ret;
>> +
>> +     csi->cilab_clk = devm_clk_get(csi->dev, "cilab");
>> +     if (IS_ERR(csi->cilab_clk)) {
>> +             dev_err(csi->dev, "Failed to get cilab clock\n");
>> +             return PTR_ERR(csi->cilab_clk);
>> +     }
>> +
>> +     csi->cilcd_clk = devm_clk_get(csi->dev, "cilcd");
>> +     if (IS_ERR(csi->cilcd_clk)) {
>> +             dev_err(csi->dev, "Failed to get cilcd clock\n");
>> +             return PTR_ERR(csi->cilcd_clk);
>> +     }
>> +
>> +     csi->cilef_clk = devm_clk_get(csi->dev, "cile");
>> +     if (IS_ERR(csi->cilef_clk)) {
>> +             dev_err(csi->dev, "Failed to get cile clock\n");
>> +             return PTR_ERR(csi->cilef_clk);
>> +     }
>> +
>> +     csi->tpg_clk = devm_clk_get(csi->dev, "csi_tpg");
>> +     if (IS_ERR(csi->tpg_clk)) {
>> +             dev_err(csi->dev, "Failed to get csi_tpg clock\n");
>> +             return PTR_ERR(csi->tpg_clk);
>> +     }
>> +
>> +     csi->csi_clk = devm_clk_get(csi->dev, "csi");
>> +     if (IS_ERR(csi->csi_clk)) {
>> +             dev_err(csi->dev, "Failed to get csi clock\n");
>> +             return PTR_ERR(csi->csi_clk);
>> +     }
>> +
>> +     ret = clk_prepare_enable(csi->csi_clk);
>> +     if (ret) {
>> +             dev_err(csi->dev, "Failed to enable csi clk, err: %d\n", ret);
>> +             return ret;
>> +     }
>> +
>> +     list_for_each_entry(csi_chan, &csi->csi_chans, list) {
>> +             void __iomem *csi_pp_base;
>> +
>> +             port = csi_chan->ports;
>> +             portno = csi_chan->csi_port_num;
>> +             csi_pp_base = csi->iomem + CSI_PP_OFFSET(portno >> 1);
>> +             port->pixel_parser = csi_pp_base +
>> +                                  (portno % CSI_PORTS_PER_BRICK) *
>> +                                  TEGRA210_CSI_PORT_OFFSET;
>> +             port->cila = csi_pp_base + TEGRA210_CSI_CIL_OFFSET;
>> +             port->cilb = port->cila + TEGRA210_CSI_PORT_OFFSET;
>> +             port->tpg = port->pixel_parser + TEGRA210_CSI_TPG_OFFSET;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +const struct tegra_csi_fops csi2_fops = {
>> +     .hw_init = csi2_hw_init,
>> +     .csi_start_streaming = csi2_start_streaming,
>> +     .csi_err_status = csi2_error_status,
>> +};
>> +EXPORT_SYMBOL(csi2_fops);
>> diff --git a/drivers/staging/media/tegra/csi2_fops.h b/drivers/staging/media/tegra/csi2_fops.h
>> new file mode 100644
>> index 000000000000..cf22a28ceb1f
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/csi2_fops.h
>> @@ -0,0 +1,15 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __CSI2_H__
>> +#define __CSI2_H__
>> +
>> +#define      TEGRA210_TPG_CLOCK              594000000
>> +#define      TEGRA210_CSI_CIL_CLK_MAX        102000000
>> +#define TEGRA210_CSI_BRICKS_MAX              3
>> +
>> +extern const struct tegra_csi_fops csi2_fops;
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
>> new file mode 100644
>> index 000000000000..740806121e6b
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/host1x-video.c
>> @@ -0,0 +1,120 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/host1x.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "host1x-video.h"
>> +
>> +static int host1x_video_probe(struct host1x_device *dev)
>> +{
>> +     struct tegra_camera *cam;
>> +     int ret;
>> +
>> +     cam = devm_kzalloc(&dev->dev, sizeof(*cam), GFP_KERNEL);
>> +     if (!cam)
>> +             return -ENOMEM;
>> +
>> +     cam->dev = get_device(&dev->dev);
>> +     cam->media_dev.dev = cam->dev;
>> +     strscpy(cam->media_dev.model, "NVIDIA Tegra Video Input Device",
>> +             sizeof(cam->media_dev.model));
>> +     cam->media_dev.hw_revision = 3;
>> +
>> +     media_device_init(&cam->media_dev);
>> +     ret = media_device_register(&cam->media_dev);
>> +     if (ret < 0) {
>> +             dev_err(cam->dev, "failed to register media device: %d\n", ret);
>> +             return ret;
>> +     }
>> +
>> +     cam->v4l2_dev.mdev = &cam->media_dev;
>> +     ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
>> +     if (ret < 0) {
>> +             dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
>> +             goto register_error;
>> +     }
>> +
>> +     dev_set_drvdata(&dev->dev, cam);
>> +
>> +     ret = host1x_device_init(dev);
>> +     if (ret < 0)
>> +             goto dev_exit;
>> +
>> +     return 0;
>> +
>> +dev_exit:
>> +     host1x_device_exit(dev);
>> +     v4l2_device_unregister(&cam->v4l2_dev);
>> +register_error:
>> +     media_device_unregister(&cam->media_dev);
>> +     media_device_cleanup(&cam->media_dev);
>> +
>> +     return ret;
>> +}
>> +
>> +static int host1x_video_remove(struct host1x_device *dev)
>> +{
>> +     struct tegra_camera *cam = dev_get_drvdata(&dev->dev);
>> +
>> +     host1x_device_exit(dev);
>> +     v4l2_device_unregister(&cam->v4l2_dev);
>> +     media_device_unregister(&cam->media_dev);
>> +     media_device_cleanup(&cam->media_dev);
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct of_device_id host1x_video_subdevs[] = {
>> +     { .compatible = "nvidia,tegra210-csi", },
>> +     { .compatible = "nvidia,tegra210-vi", },
>> +     { }
>> +};
>> +
>> +static struct host1x_driver host1x_video_driver = {
>> +     .driver = {
>> +             .name = "host1x_video",
>> +     },
>> +     .probe = host1x_video_probe,
>> +     .remove = host1x_video_remove,
>> +     .subdevs = host1x_video_subdevs,
>> +};
>> +
>> +static struct platform_driver * const drivers[] = {
>> +     &tegra_csi_driver,
>> +     &tegra_vi_driver,
>> +};
>> +
>> +static int __init host1x_video_init(void)
>> +{
>> +     int err;
>> +
>> +     err = host1x_driver_register(&host1x_video_driver);
>> +     if (err < 0)
>> +             return err;
>> +
>> +     err = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
>> +     if (err < 0)
>> +             goto unregister_host1x;
>> +
>> +     return 0;
>> +
>> +unregister_host1x:
>> +     host1x_driver_unregister(&host1x_video_driver);
>> +     return err;
>> +}
>> +module_init(host1x_video_init);
>> +
>> +static void __exit host1x_video_exit(void)
>> +{
>> +     platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
>> +     host1x_driver_unregister(&host1x_video_driver);
>> +}
>> +module_exit(host1x_video_exit);
>> +
>> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
>> +MODULE_DESCRIPTION("NVIDIA Tegra Host1x Video driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>> new file mode 100644
>> index 000000000000..84d28e6f4362
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/host1x-video.h
>> @@ -0,0 +1,33 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef HOST1X_VIDEO_H
>> +#define HOST1X_VIDEO_H 1
>> +
>> +#include <linux/host1x.h>
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +#include "tegra-vi.h"
>> +#include "csi.h"
>> +
>> +struct tegra_camera {
>> +     struct v4l2_device v4l2_dev;
>> +     struct media_device media_dev;
>> +     struct device *dev;
>> +     struct tegra_vi *vi;
>> +     struct tegra_csi_device *csi;
>> +};
>> +
>> +extern struct platform_driver tegra_vi_driver;
>> +extern struct platform_driver tegra_csi_driver;
>> +
>> +#endif /* HOST1X_VIDEO_H */
>> diff --git a/drivers/staging/media/tegra/mc_common.h b/drivers/staging/media/tegra/mc_common.h
>> new file mode 100644
>> index 000000000000..9e88f3295ef4
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/mc_common.h
>> @@ -0,0 +1,131 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __MC_COMMON_H_
>> +#define __MC_COMMON_H_
>> +
>> +#include <linux/host1x.h>
>> +#include <linux/mutex.h>
>> +#include <linux/spinlock.h>
>> +
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +#include "tegra-core.h"
>> +#include "tegra-vi.h"
>> +#include "csi.h"
>> +
>> +#define MAX_FORMAT_NUM       64
>> +
>> +struct tegra_csi_fops {
>> +     int (*hw_init)(struct tegra_csi_device *csi);
>> +     int (*csi_start_streaming)(struct tegra_csi_channel *csi_chan,
>> +                                u8 pg_mode, int enable);
>> +     void (*csi_err_status)(struct tegra_csi_channel *csi_chan);
>> +};
>> +
>> +/**
>> + * struct tegra_channel - Tegra video channel
>> + * @list: list entry in a composite device dmas list
>> + * @video: V4L2 video device associated with the video channel
>> + * @video_lock: protects the @format and @queue fields
>> + * @pad: media pad for the video device entity
>> + *
>> + * @vi: composite device DT node port number for the channel
>> + *
>> + * @sp: host1x syncpoint pointer
>> + *
>> + * @kthread_capture_start: capture start kthread of this video channel
>> + * @start_wait: wait queue used by capture start kthread
>> + * @kthread_capture_done: capture done kthread of this video channel
>> + * @done_wait: wait queue used by capture done kthread
>> + *
>> + * @format: active V4L2 pixel format
>> + * @fmtinfo: format information corresponding to the active @format
>> + * @video_formats: supported video formats
>> + * @nformats: supported number of video formats
>> + *
>> + * @queue: vb2 buffers queue
>> + * @sequence: V4L2 buffers sequence number
>> + *
>> + * @capture: list of queued buffers for capture
>> + * @start_lock: protects the capture queued list
>> + * @done: list of capture done queued buffers
>> + * @done_lock: protects the capture done queue list
>> + *
>> + * @stride_align: channel buffer stride alignment
>> + * @width_align: channel buffer width alignment
>> + * @height_align: channel buffer height alignment
>> + * @size_align: channel buffer size alignment
>> +
>> + * @port: CSI port of this video channel
>> + *
>> + * @ctrl_handler: V4L2 control handler of this video channel
>> + * @tpg_fmts_bitmap: a bitmap for supported TPG formats
>> + */
>> +struct tegra_channel {
>> +     struct list_head list;
>> +     struct video_device video;
>> +     /* protects the @format and @queue fields */
>> +     struct mutex video_lock;
>> +     struct media_pad pad;
>> +
>> +     struct tegra_vi *vi;
>> +     struct host1x_syncpt *sp;
>> +
>> +     struct task_struct *kthread_capture_start;
>> +     wait_queue_head_t start_wait;
>> +     struct task_struct *kthread_capture_done;
>> +     wait_queue_head_t done_wait;
>> +
>> +     struct v4l2_pix_format format;
>> +     const struct tegra_video_format *fmtinfo;
>> +     const struct tegra_video_format *video_formats;
>> +     unsigned int nformats;
>> +     struct vb2_queue queue;
>> +     u32 sequence;
>> +
>> +     struct list_head capture;
>> +     /* protects the capture queued list */
>> +     spinlock_t start_lock;
>> +     struct list_head done;
>> +     /* protects the capture done queue list */
>> +     spinlock_t done_lock;
>> +
>> +     unsigned int stride_align;
>> +     unsigned int width_align;
>> +     unsigned int height_align;
>> +     unsigned int size_align;
>> +     unsigned char port;
>> +
>> +     struct v4l2_ctrl_handler ctrl_handler;
>> +     DECLARE_BITMAP(tpg_fmts_bitmap, MAX_FORMAT_NUM);
>> +};
>> +
>> +#define to_tegra_channel(vdev) \
>> +     container_of(vdev, struct tegra_channel, video)
>> +
>> +const struct tegra_video_format *tegra_core_get_default_format(void);
>> +u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
>> +                              unsigned int index);
>> +int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
>> +                            unsigned int offset);
>> +const struct tegra_video_format *
>> +tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc);
>> +
>> +int tegra_channel_init(struct tegra_channel *chan);
>> +int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan);
>> +int tegra_channel_cleanup(struct tegra_channel *chan);
>> +int tegra_channel_set_stream(struct tegra_channel *chan, bool on);
>> +void tegra_channel_queued_buf_done(struct tegra_channel *chan,
>> +                                enum vb2_buffer_state state);
>> +int tegra_channel_csi_error_status(struct tegra_channel *chan);
>> +
>> +#endif
>> diff --git a/drivers/staging/media/tegra/tegra-channel.c b/drivers/staging/media/tegra/tegra-channel.c
>> new file mode 100644
>> index 000000000000..7561f6fb8748
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-channel.c
>> @@ -0,0 +1,628 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/atomic.h>
>> +#include <linux/bitmap.h>
>> +#include <linux/clk.h>
>> +#include <linux/host1x.h>
>> +#include <linux/kthread.h>
>> +#include <linux/lcm.h>
>> +#include <linux/list.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +
>> +#include <media/v4l2-event.h>
>> +#include <media/v4l2-fh.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/videobuf2-dma-contig.h>
>> +
>> +#include <soc/tegra/pmc.h>
>> +
>> +#include "mc_common.h"
>> +#include "tegra-vi.h"
>> +#include "host1x-video.h"
>> +
>> +#define MAX_CID_CONTROLS             1
>> +
>> +static const char *const vi_pattern_strings[] = {
>> +     "Black/White Direct Mode",
>> +     "Color Patch Mode",
>> +};
>> +
>> +static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> +     struct tegra_channel *chan = container_of(ctrl->handler,
>> +                                               struct tegra_channel,
>> +                                               ctrl_handler);
>> +
>> +     switch (ctrl->id) {
>> +     case V4L2_CID_TEST_PATTERN:
>> +             chan->vi->pg_mode = ctrl->val + 1;
>> +             dev_info(chan->vi->dev, "TPG mode is set to %s\n",
>> +                      vi_pattern_strings[ctrl->val]);
> There is no need to spam the log with this message.
>
>> +             break;
>> +
>> +     default:
>> +             dev_err(chan->vi->dev, "Invalid Tegra video control\n");
> This can be dropped as well. Actually, this should never happen since the
> control framework will call this function for valid controls only.
>
>> +             return -EINVAL;
> Traditionally the 'default: return -EINVAL;' is kept, just in case we ever
> hit this through some regression.
>
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct v4l2_ctrl_ops vi_ctrl_ops = {
>> +     .s_ctrl = vi_s_ctrl,
>> +};
>> +
>> +/*
>> + * videobuf2 queue operations
>> + */
>> +static int tegra_channel_queue_setup(struct vb2_queue *vq,
>> +                                  unsigned int *nbuffers,
>> +                                  unsigned int *nplanes,
>> +                                  unsigned int sizes[],
>> +                                  struct device *alloc_devs[])
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vq);
>> +     unsigned int count = *nbuffers;
>> +
>> +     if (*nplanes)
>> +             return sizes[0] < chan->format.sizeimage ? -EINVAL : 0;
>> +
>> +     *nplanes = 1;
>> +     sizes[0] = chan->format.sizeimage;
>> +     alloc_devs[0] = chan->vi->dev;
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_buffer_prepare(struct vb2_buffer *vb)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
>> +     struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> +     struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
>> +     unsigned long size = chan->format.sizeimage;
>> +
>> +     if (vb2_plane_size(vb, 0) < size) {
>> +             v4l2_err(chan->video.v4l2_dev, "buffer too small (%lu < %lu)\n",
>> +                      vb2_plane_size(vb, 0), size);
>> +             return -EINVAL;
>> +     }
>> +
>> +     vb2_set_plane_payload(vb, 0, size);
>> +     buf->chan = chan;
>> +     buf->addr = vb2_dma_contig_plane_dma_addr(vb, 0);
>> +
>> +     return 0;
>> +}
>> +
>> +static void tegra_channel_buffer_queue(struct vb2_buffer *vb)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vb->vb2_queue);
>> +     struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> +     struct tegra_channel_buffer *buf = to_tegra_channel_buffer(vbuf);
>> +
>> +     /* put buffer into the capture queue */
>> +     spin_lock(&chan->start_lock);
>> +     list_add_tail(&buf->queue, &chan->capture);
>> +     spin_unlock(&chan->start_lock);
>> +
>> +     /* wait up kthread for capture */
>> +     wake_up_interruptible(&chan->start_wait);
>> +}
>> +
>> +int tegra_channel_csi_error_status(struct tegra_channel *chan)
>> +{
>> +     struct media_entity *entity;
>> +     struct media_pad *pad;
>> +     struct v4l2_subdev *subdev;
>> +
>> +     pad = media_entity_remote_pad(&chan->pad);
>> +     if (!pad)
>> +             return -ENODEV;
>> +
>> +     entity = pad->entity;
>> +     subdev = media_entity_to_v4l2_subdev(entity);
>> +
>> +     tegra_csi_error_status(subdev);
>> +
>> +     return 0;
>> +}
>> +
>> +static struct v4l2_subdev *
>> +tegra_channel_get_remote_subdev(struct tegra_channel *chan)
>> +{
>> +     struct media_pad *pad;
>> +     struct v4l2_subdev *subdev;
>> +     struct media_entity *entity;
>> +
>> +     pad = media_entity_remote_pad(&chan->pad);
>> +     entity = pad->entity;
>> +     subdev = media_entity_to_v4l2_subdev(entity);
>> +
>> +     return subdev;
>> +}
>> +
>> +int tegra_channel_set_stream(struct tegra_channel *chan, bool on)
>> +{
>> +     struct v4l2_subdev *subdev;
>> +     int ret;
>> +
>> +     /* stream CSI */
>> +     subdev = tegra_channel_get_remote_subdev(chan);
>> +     v4l2_set_subdev_hostdata(subdev, chan);
>> +     ret = v4l2_subdev_call(subdev, video, s_stream, on);
>> +     if (on && ret < 0 && ret != -ENOIOCTLCMD)
>> +             return ret;
>> +
>> +     return 0;
>> +}
>> +
>> +void tegra_channel_queued_buf_done(struct tegra_channel *chan,
>> +                                enum vb2_buffer_state state)
>> +{
>> +     struct tegra_channel_buffer *buf, *nbuf;
>> +
>> +     spin_lock(&chan->start_lock);
>> +     list_for_each_entry_safe(buf, nbuf, &chan->capture, queue) {
>> +             vb2_buffer_done(&buf->buf.vb2_buf, state);
>> +             list_del(&buf->queue);
>> +     }
>> +
>> +     spin_unlock(&chan->start_lock);
>> +}
>> +
>> +static int tegra_channel_start_streaming(struct vb2_queue *vq, u32 count)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vq);
>> +
>> +     if (chan->vi->fops->vi_start_streaming)
>> +             return chan->vi->fops->vi_start_streaming(vq, count);
>> +
>> +     return 0;
>> +}
>> +
>> +static void tegra_channel_stop_streaming(struct vb2_queue *vq)
>> +{
>> +     struct tegra_channel *chan = vb2_get_drv_priv(vq);
>> +
>> +     if (chan->vi->fops->vi_start_streaming)
>> +             chan->vi->fops->vi_stop_streaming(vq);
>> +}
>> +
>> +static const struct vb2_ops tegra_channel_queue_qops = {
>> +     .queue_setup = tegra_channel_queue_setup,
>> +     .buf_prepare = tegra_channel_buffer_prepare,
>> +     .buf_queue = tegra_channel_buffer_queue,
>> +     .wait_prepare = vb2_ops_wait_prepare,
>> +     .wait_finish = vb2_ops_wait_finish,
>> +     .start_streaming = tegra_channel_start_streaming,
>> +     .stop_streaming = tegra_channel_stop_streaming,
>> +};
>> +
>> +/*
>> + * V4L2 ioctls
>> + */
>> +static int tegra_channel_querycap(struct file *file, void *fh,
>> +                               struct v4l2_capability *cap)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +
>> +     cap->device_caps = chan->video.device_caps;
>> +     cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
> Just drop these two lines. You already set device_caps in struct video_device,
> and that's sufficient. The v4l2 core will set these two fields for you
> based on the video_device.
>
>> +     strscpy(cap->driver, "tegra-video", sizeof(cap->driver));
>> +     strscpy(cap->card, chan->video.name, sizeof(cap->card));
>> +     snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s:%u",
>> +              dev_name(chan->vi->dev), chan->port);
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_enum_format(struct file *file, void *fh,
>> +                                  struct v4l2_fmtdesc *f)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +     unsigned int index = 0, i;
>> +     unsigned long *fmts_bitmap = chan->tpg_fmts_bitmap;
>> +
>> +     if (f->index >= bitmap_weight(fmts_bitmap, MAX_FORMAT_NUM))
>> +             return -EINVAL;
>> +
>> +     for (i = 0; i < f->index + 1; i++, index++)
>> +             index = find_next_bit(fmts_bitmap, MAX_FORMAT_NUM, index);
>> +
>> +     f->pixelformat = tegra_core_get_fourcc_by_idx(chan, index - 1);
>> +
>> +     return 0;
>> +}
>> +
>> +static void
>> +tegra_channel_fmt_align(struct tegra_channel *chan,
>> +                     const struct tegra_frac *bpp,
>> +                     u32 *width, u32 *height, u32 *bytesperline)
>> +{
>> +     unsigned int min_width, max_width;
>> +     unsigned int min_bpl, max_bpl, bpl;
>> +     unsigned int align, fmt_align;
>> +     unsigned int temp_width, temp_bpl;
>> +     unsigned int numerator, denominator;
>> +
>> +     denominator = (!bpp->denominator) ? 1 : bpp->denominator;
>> +     numerator = (!bpp->numerator) ? 1 : bpp->numerator;
>> +     fmt_align = (denominator == 1) ? numerator : 1;
>> +     align = lcm(chan->width_align, fmt_align);
>> +     bpl = (*width * numerator) / denominator;
>> +
>> +     if (chan->vi->fops->vi_stride_align)
>> +             chan->vi->fops->vi_stride_align(&bpl);
>> +
>> +     if (!*bytesperline)
>> +             *bytesperline = bpl;
>> +
>> +     /*
>> +      * The transfer alignment requirements are expressed in bytes. Compute
>> +      * the minimum and maximum values, clamp the requested width and convert
>> +      * it back to pixels.
>> +      * use bytesperline to adjust width for applicaton related requriements.
>> +      */
>> +     min_width = roundup(TEGRA_MIN_WIDTH, align);
>> +     max_width = rounddown(TEGRA_MAX_WIDTH, align);
>> +     temp_width = roundup(bpl, align);
>> +     *width = (clamp(temp_width, min_width, max_width) * denominator) /
>> +                     numerator;
>> +     *height = clamp(*height, TEGRA_MIN_HEIGHT, TEGRA_MAX_HEIGHT);
>> +
>> +     /*
>> +      * Clamp the requested bytes per line value. If the maximum bytes per
>> +      * line value is zero, the module doesn't support user configurable line
>> +      * sizes. Override the requested value with the minimum in that case.
>> +      */
>> +     min_bpl = bpl;
>> +     max_bpl = rounddown(TEGRA_MAX_WIDTH, chan->stride_align);
>> +     temp_bpl = roundup(*bytesperline, chan->stride_align);
>> +     *bytesperline = clamp(temp_bpl, min_bpl, max_bpl);
>> +}
>> +
>> +static void tegra_channel_update_format(struct tegra_channel *chan, u32 width,
>> +                                     u32 height, u32 fourcc,
>> +                                     const struct tegra_frac *bpp,
>> +                                     u32 preferred_stride)
>> +{
>> +     u32 denominator = (!bpp->denominator) ? 1 : bpp->denominator;
>> +     u32 numerator = (!bpp->numerator) ? 1 : bpp->numerator;
>> +     u32 bytesperline = (width * numerator / denominator);
>> +     u32 sizeimage, height_aligned;
>> +
>> +     chan->format.width = width;
>> +     chan->format.height = height;
>> +     chan->format.pixelformat = fourcc;
>> +     chan->format.bytesperline = preferred_stride ?: bytesperline;
>> +
>> +     tegra_channel_fmt_align(chan, bpp,
>> +                             &chan->format.width,
>> +                             &chan->format.height,
>> +                             &chan->format.bytesperline);
>> +
>> +     /* calculate the sizeimage per plane */
>> +     height_aligned = roundup(chan->format.height, chan->height_align);
>> +     sizeimage = chan->format.bytesperline * height_aligned;
>> +     chan->format.sizeimage = roundup(sizeimage, chan->size_align);
>> +}
>> +
>> +static int tegra_channel_get_format(struct file *file, void *fh,
>> +                                 struct v4l2_format *format)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +
>> +     format->fmt.pix = chan->format;
>> +
>> +     return 0;
>> +}
>> +
>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>> +                                   struct v4l2_pix_format *pix,
>> +                                   const struct tegra_video_format **vfmt)
>> +{
>> +     const struct tegra_video_format *fmt_info;
>> +     struct v4l2_subdev *subdev;
>> +     struct v4l2_subdev_format fmt;
>> +     struct v4l2_subdev_pad_config *pad_cfg;
>> +
>> +     subdev = tegra_channel_get_remote_subdev(chan);
>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>> +     if (!pad_cfg)
>> +             return -ENOMEM;
>> +
>> +     /*
>> +      * Retrieve format information and select the default format if the
>> +      * requested format isn't supported.
>> +      */
>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>> +     if (!fmt_info) {
>> +             pix->pixelformat = chan->format.pixelformat;
>> +             pix->colorspace = chan->format.colorspace;
>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>> +                                                        pix->pixelformat);
>> +     }
>> +
>> +     /* Change this when start adding interlace format support */
>> +     pix->field = V4L2_FIELD_NONE;
>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>> +     fmt.pad = 0;
>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>> +
>> +     v4l2_fill_pix_format(pix, &fmt.format);
>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>> +                             &pix->bytesperline);
>> +     pix->sizeimage = pix->bytesperline * pix->height;
>> +
>> +     if (vfmt)
>> +             *vfmt = fmt_info;
>> +
>> +     v4l2_subdev_free_pad_config(pad_cfg);
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_try_format(struct file *file, void *fh,
>> +                                 struct v4l2_format *format)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +
>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>> +}
>> +
>> +static int tegra_channel_set_format(struct file *file, void *fh,
>> +                                 struct v4l2_format *format)
>> +{
>> +     struct v4l2_fh *vfh = file->private_data;
>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>> +     const struct tegra_video_format *info;
>> +     int ret;
>> +     struct v4l2_subdev_format fmt;
>> +     struct v4l2_subdev *subdev;
>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>> +
>> +     if (vb2_is_busy(&chan->queue))
>> +             return -EBUSY;
>> +
>> +     /* get supported format by try_fmt */
>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>> +     if (ret)
>> +             return ret;
>> +
>> +     subdev = tegra_channel_get_remote_subdev(chan);
>> +
>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>> +     fmt.pad = 0;
>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>> +
>> +     v4l2_fill_pix_format(pix, &fmt.format);
>> +     chan->format = *pix;
>> +     chan->fmtinfo = info;
>> +     tegra_channel_update_format(chan, pix->width,
>> +                                 pix->height, info->fourcc,
>> +                                 &info->bpp,
>> +                                 pix->bytesperline);
>> +     *pix = chan->format;
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>> +                                 struct v4l2_input *inp)
>> +{
>> +     /* Currently driver supports internal TPG only */
>> +     if (inp->index != 0)
>> +             return -EINVAL;
>> +
>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_g_input(struct file *file, void *priv,
>> +                              unsigned int *i)
>> +{
>> +     *i = 0;
>> +     return 0;
>> +}
>> +
>> +static int tegra_channel_s_input(struct file *file, void *priv,
>> +                              unsigned int input)
>> +{
>> +     if (input > 0)
>> +             return -EINVAL;
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct v4l2_ioctl_ops tegra_channel_ioctl_ops = {
>> +     .vidioc_querycap                = tegra_channel_querycap,
>> +     .vidioc_enum_fmt_vid_cap        = tegra_channel_enum_format,
>> +     .vidioc_g_fmt_vid_cap           = tegra_channel_get_format,
>> +     .vidioc_s_fmt_vid_cap           = tegra_channel_set_format,
>> +     .vidioc_try_fmt_vid_cap         = tegra_channel_try_format,
>> +     .vidioc_enum_input              = tegra_channel_enum_input,
>> +     .vidioc_g_input                 = tegra_channel_g_input,
>> +     .vidioc_s_input                 = tegra_channel_s_input,
>> +     .vidioc_reqbufs                 = vb2_ioctl_reqbufs,
>> +     .vidioc_prepare_buf             = vb2_ioctl_prepare_buf,
>> +     .vidioc_querybuf                = vb2_ioctl_querybuf,
>> +     .vidioc_qbuf                    = vb2_ioctl_qbuf,
>> +     .vidioc_dqbuf                   = vb2_ioctl_dqbuf,
>> +     .vidioc_create_bufs             = vb2_ioctl_create_bufs,
>> +     .vidioc_expbuf                  = vb2_ioctl_expbuf,
>> +     .vidioc_streamon                = vb2_ioctl_streamon,
>> +     .vidioc_streamoff               = vb2_ioctl_streamoff,
>> +     .vidioc_subscribe_event         = v4l2_ctrl_subscribe_event,
>> +     .vidioc_unsubscribe_event       = v4l2_event_unsubscribe,
>> +};
>> +
>> +/*
>> + * V4L2 file operations
>> + */
>> +static const struct v4l2_file_operations tegra_channel_fops = {
>> +     .owner          = THIS_MODULE,
>> +     .unlocked_ioctl = video_ioctl2,
>> +     .open           = v4l2_fh_open,
>> +     .release        = vb2_fop_release,
>> +     .read           = vb2_fop_read,
>> +     .poll           = vb2_fop_poll,
>> +     .mmap           = vb2_fop_mmap,
>> +};
>> +
>> +int tegra_channel_setup_ctrl_handler(struct tegra_channel *chan)
>> +{
>> +     int ret;
>> +
>> +     /* Add test pattern control handler to v4l2 device */
>> +     v4l2_ctrl_new_std_menu_items(&chan->ctrl_handler, &vi_ctrl_ops,
>> +                                  V4L2_CID_TEST_PATTERN,
>> +                                  ARRAY_SIZE(vi_pattern_strings) - 1,
>> +                                  0, 0, vi_pattern_strings);
>> +     if (chan->ctrl_handler.error) {
>> +             dev_err(chan->vi->dev, "failed to add TPG ctrl handler\n");
>> +             v4l2_ctrl_handler_free(&chan->ctrl_handler);
>> +             return chan->ctrl_handler.error;
>> +     }
>> +
>> +     /* setup the controls */
>> +     ret = v4l2_ctrl_handler_setup(&chan->ctrl_handler);
>> +     if (ret < 0) {
>> +             dev_err(chan->vi->dev, "failed to setup v4l2 ctrl handler\n");
>> +             goto free_hdl;
>> +     }
>> +
>> +     return 0;
>> +
>> +free_hdl:
>> +     v4l2_ctrl_handler_free(&chan->ctrl_handler);
>> +     return ret;
>> +}
>> +
>> +int tegra_channel_init(struct tegra_channel *chan)
>> +{
>> +     struct tegra_vi *vi = chan->vi;
>> +     struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>> +     int ret;
>> +
>> +     mutex_init(&chan->video_lock);
>> +     INIT_LIST_HEAD(&chan->capture);
>> +     INIT_LIST_HEAD(&chan->done);
>> +     spin_lock_init(&chan->start_lock);
>> +     spin_lock_init(&chan->done_lock);
>> +     init_waitqueue_head(&chan->start_wait);
>> +     init_waitqueue_head(&chan->done_wait);
>> +
>> +     /* Default alignments */
>> +     chan->width_align = TEGRA_WIDTH_ALIGNMENT;
>> +     chan->stride_align = TEGRA_STRIDE_ALIGNMENT;
>> +     chan->height_align = TEGRA_HEIGHT_ALIGNMENT;
>> +     chan->size_align = TEGRA_SIZE_ALIGNMENT;
>> +
>> +     /* initialize the video format */
>> +     chan->fmtinfo = tegra_core_get_default_format();
>> +     chan->format.colorspace = V4L2_COLORSPACE_SRGB;
>> +     chan->format.field = V4L2_FIELD_NONE;
>> +     tegra_channel_update_format(chan, TEGRA_DEF_WIDTH, TEGRA_DEF_HEIGHT,
>> +                                 chan->fmtinfo->fourcc,
>> +                                 &chan->fmtinfo->bpp, 0);
>> +
>> +     /* initialize the media entity */
>> +     chan->pad.flags = MEDIA_PAD_FL_SINK;
>> +     ret = media_entity_pads_init(&chan->video.entity, 1, &chan->pad);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     ret = v4l2_ctrl_handler_init(&chan->ctrl_handler, MAX_CID_CONTROLS);
>> +     if (chan->ctrl_handler.error) {
>> +             dev_err(vi->dev,
>> +                     "V4L2 controls handler init failed: %d\n", ret);
>> +             goto ctrl_init_error;
>> +     }
>> +
>> +     /* initialize the video_device */
>> +     chan->video.fops = &tegra_channel_fops;
>> +     chan->video.v4l2_dev = &cam->v4l2_dev;
>> +     chan->video.queue = &chan->queue;
>> +     snprintf(chan->video.name, sizeof(chan->video.name), "%s-%s-%u",
>> +              dev_name(vi->dev), "output", chan->port);
>> +     chan->video.vfl_type = VFL_TYPE_GRABBER;
>> +     chan->video.vfl_dir = VFL_DIR_RX;
>> +     chan->video.release = video_device_release_empty;
>> +     chan->video.ioctl_ops = &tegra_channel_ioctl_ops;
>> +     chan->video.ctrl_handler = &chan->ctrl_handler;
>> +     chan->video.lock = &chan->video_lock;
>> +     chan->video.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
>> +                               V4L2_CAP_READWRITE;
>> +
>> +     video_set_drvdata(&chan->video, chan);
>> +     chan->sp = host1x_syncpt_request(&vi->client, HOST1X_SYNCPT_HAS_BASE);
>> +     if (!chan->sp) {
>> +             dev_err(vi->dev, "failed to request syncpoint\n");
>> +             ret = -ENOMEM;
>> +             goto host1x_sp_error;
>> +     }
>> +
>> +     chan->queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> +     chan->queue.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
>> +     chan->queue.lock = &chan->video_lock;
>> +     chan->queue.drv_priv = chan;
>> +     chan->queue.buf_struct_size = sizeof(struct tegra_channel_buffer);
>> +     chan->queue.ops = &tegra_channel_queue_qops;
>> +     chan->queue.mem_ops = &vb2_dma_contig_memops;
>> +     chan->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
>> +                                | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;
> Just drop V4L2_BUF_FLAG_TSTAMP_SRC_EOF, it's 0 anyway. It's not common practice
> to set this.
>
>> +     chan->queue.dev = vi->dev;
>> +     ret = vb2_queue_init(&chan->queue);
>> +     if (ret < 0) {
>> +             dev_err(vi->dev,
>> +                     "failed to initialize VB2 queue, err: %d\n", ret);
>> +             goto vb2_init_error;
>> +     }
>> +
>> +     ret = video_register_device(&chan->video, VFL_TYPE_GRABBER, -1);
>> +     if (ret < 0) {
>> +             dev_err(&chan->video.dev,
>> +                     "failed to register video device, err: %d\n", ret);
>> +             goto video_register_error;
>> +     }
>> +
>> +     return 0;
>> +
>> +video_register_error:
>> +     vb2_queue_release(&chan->queue);
>> +vb2_init_error:
>> +     host1x_syncpt_free(chan->sp);
>> +host1x_sp_error:
>> +     v4l2_ctrl_handler_free(&chan->ctrl_handler);
>> +ctrl_init_error:
>> +     media_entity_cleanup(&chan->video.entity);
>> +     return ret;
>> +}
>> +
>> +int tegra_channel_cleanup(struct tegra_channel *chan)
>> +{
>> +     if (video_is_registered(&chan->video)) {
>> +             video_unregister_device(&chan->video);
>> +             vb2_queue_release(&chan->queue);
>> +             media_entity_cleanup(&chan->video.entity);
>> +     }
>> +
>> +     host1x_syncpt_free(chan->sp);
>> +     v4l2_ctrl_handler_free(&chan->ctrl_handler);
>> +
>> +     return 0;
>> +}
>> diff --git a/drivers/staging/media/tegra/tegra-core.c b/drivers/staging/media/tegra/tegra-core.c
>> new file mode 100644
>> index 000000000000..80ede3ad7266
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-core.c
>> @@ -0,0 +1,111 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/export.h>
>> +#include <linux/kernel.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "mc_common.h"
>> +#include "tegra-core.h"
>> +
>> +static const struct tegra_video_format tegra_default_format = {
>> +     /* RAW 10 */
>> +     TEGRA_VF_RAW10,
>> +     10,
>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>> +     {2, 1},
>> +     TEGRA_IMAGE_FORMAT_DEF,
>> +     TEGRA_IMAGE_DT_RAW10,
>> +     V4L2_PIX_FMT_SRGGB10,
>> +     "RGRG.. GBGB..",
> Is this string used anywhere? The v4l2 core automatically sets the pixelformat
> description for you in VIDIOC_ENUMFMT these days.
>
>> +};
>> +
>> +/*
>> + * Helper functions
>> + */
>> +
>> +/**
>> + * tegra_core_get_default_format - Get default format
>> + *
>> + * Return: pointer to the format where the default format needs
>> + * to be filled in.
>> + */
>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>> +{
>> +     return &tegra_default_format;
>> +}
>> +
>> +/**
>> + * tegra_core_get_fourcc_by_idx - get fourcc of a tegra_video format
>> + * @index: array index of the tegra_video_formats
>> + *
>> + * Return: fourcc code
>> + */
>> +u32 tegra_core_get_fourcc_by_idx(struct tegra_channel *chan,
>> +                              unsigned int index)
>> +{
>> +     if (index >= chan->nformats)
>> +             return -EINVAL;
>> +
>> +     return chan->video_formats[index].fourcc;
>> +}
>> +
>> +/**
>> + * tegra_core_get_word_count - Calculate word count
>> + * @frame_width: number of pixels per line
>> + * @fmt: Tegra Video format struct which has BPP information
>> + *
>> + * Return: word count number
>> + */
>> +u32 tegra_core_get_word_count(unsigned int frame_width,
>> +                           const struct tegra_video_format *fmt)
>> +{
>> +     return frame_width * fmt->width / 8;
>> +}
>> +
>> +/**
>> + * tegra_core_get_idx_by_code - Retrieve index for a media bus code
>> + * @chan: tegra_channel
>> + * @code: the format media bus code
>> + * @offset: offset in video formats from where to start the search
>> + *
>> + * Return: a index to the format information structure corresponding to the
>> + * given V4L2 media bus format @code, or -1 if no corresponding format can
>> + * be found.
>> + */
>> +int tegra_core_get_idx_by_code(struct tegra_channel *chan, unsigned int code,
>> +                            unsigned int offset)
>> +{
>> +     unsigned int i;
>> +
>> +     for (i = offset; i < chan->nformats; ++i) {
>> +             if (chan->video_formats[i].code == code)
>> +                     return i;
>> +     }
>> +
>> +     return -1;
>> +}
>> +
>> +/**
>> + * tegra_core_get_format_by_fourcc - Retrieve format information for a 4CC
>> + * @fourcc: the format 4CC
>> + *
>> + * Return: a pointer to the format information structure corresponding to the
>> + * given V4L2 format @fourcc, or NULL if no corresponding format can be
>> + * found.
>> + */
>> +const struct tegra_video_format *
>> +tegra_core_get_format_by_fourcc(struct tegra_channel *chan, u32 fourcc)
>> +{
>> +     unsigned int i;
>> +
>> +     for (i = 0; i < chan->nformats; ++i) {
>> +             if (chan->video_formats[i].fourcc == fourcc)
>> +                     return &chan->video_formats[i];
>> +     }
>> +
>> +     return NULL;
>> +}
>> diff --git a/drivers/staging/media/tegra/tegra-core.h b/drivers/staging/media/tegra/tegra-core.h
>> new file mode 100644
>> index 000000000000..193065d20a95
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-core.h
>> @@ -0,0 +1,125 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#ifndef __TEGRA_CORE_H__
>> +#define __TEGRA_CORE_H__
>> +
>> +#include <media/v4l2-subdev.h>
>> +
>> +/* Minimum and maximum width and height common to Tegra video input device. */
>> +#define TEGRA_MIN_WIDTH              32U
>> +#define TEGRA_MAX_WIDTH              32768U
>> +#define TEGRA_MIN_HEIGHT     32U
>> +#define TEGRA_MAX_HEIGHT     32768U
>> +
>> +/* Width alignment */
>> +#define TEGRA_WIDTH_ALIGNMENT        1
>> +/* Stride alignment */
>> +#define TEGRA_STRIDE_ALIGNMENT       1
>> +/* Height alignment */
>> +#define TEGRA_HEIGHT_ALIGNMENT       1
>> +/* Size alignment */
>> +#define TEGRA_SIZE_ALIGNMENT 1
>> +
>> +/* 1080p resolution as default resolution for test pattern generator */
>> +#define TEGRA_DEF_WIDTH              1920
>> +#define TEGRA_DEF_HEIGHT     1080
>> +
>> +#define TEGRA_VF_DEF         MEDIA_BUS_FMT_SRGGB10_1X10
>> +#define TEGRA_IMAGE_FORMAT_DEF       32
>> +
>> +/*
>> + * These go into the TEGRA_VI_CSI_n_CSI_IMAGE_DT registers bits 7:0
>> + * Input data type of VI channel.
>> + */
>> +enum tegra_image_dt {
>> +     TEGRA_IMAGE_DT_YUV420_8 = 24,
>> +     TEGRA_IMAGE_DT_YUV420_10,
>> +
>> +     TEGRA_IMAGE_DT_YUV420CSPS_8 = 28,
>> +     TEGRA_IMAGE_DT_YUV420CSPS_10,
>> +     TEGRA_IMAGE_DT_YUV422_8,
>> +     TEGRA_IMAGE_DT_YUV422_10,
>> +     TEGRA_IMAGE_DT_RGB444,
>> +     TEGRA_IMAGE_DT_RGB555,
>> +     TEGRA_IMAGE_DT_RGB565,
>> +     TEGRA_IMAGE_DT_RGB666,
>> +     TEGRA_IMAGE_DT_RGB888,
>> +
>> +     TEGRA_IMAGE_DT_RAW6 = 40,
>> +     TEGRA_IMAGE_DT_RAW7,
>> +     TEGRA_IMAGE_DT_RAW8,
>> +     TEGRA_IMAGE_DT_RAW10,
>> +     TEGRA_IMAGE_DT_RAW12,
>> +     TEGRA_IMAGE_DT_RAW14,
>> +};
>> +
>> +/* Supported CSI to VI Data Formats */
>> +enum tegra_vf_code {
>> +     TEGRA_VF_RAW6 = 0,
>> +     TEGRA_VF_RAW7,
>> +     TEGRA_VF_RAW8,
>> +     TEGRA_VF_RAW10,
>> +     TEGRA_VF_RAW12,
>> +     TEGRA_VF_RAW14,
>> +     TEGRA_VF_EMBEDDED8,
>> +     TEGRA_VF_RGB565,
>> +     TEGRA_VF_RGB555,
>> +     TEGRA_VF_RGB888,
>> +     TEGRA_VF_RGB444,
>> +     TEGRA_VF_RGB666,
>> +     TEGRA_VF_YUV422,
>> +     TEGRA_VF_YUV420,
>> +     TEGRA_VF_YUV420_CSPS,
>> +};
>> +
>> +/**
>> + * struct tegra_frac
>> + * @numerator: numerator of the fraction
>> + * @denominator: denominator of the fraction
>> + */
>> +struct tegra_frac {
>> +     unsigned int numerator;
>> +     unsigned int denominator;
>> +};
>> +
>> +/**
>> + * struct tegra_video_format - Tegra video format description
>> + * @vf_code: video format code
>> + * @width: format width in bits per component
>> + * @code: media bus format code
>> + * @bpp: bytes per pixel (when stored in memory)
>> + * @img_fmt: image format
>> + * @img_dt: image data type
>> + * @fourcc: V4L2 pixel format FCC identifier
>> + * @description: format description, suitable for userspace
> As mentioned above: this is almost certainly no longer needed.
>
>> + */
>> +struct tegra_video_format {
>> +     enum tegra_vf_code vf_code;
>> +     unsigned int width;
>> +     unsigned int code;
>> +     struct tegra_frac bpp;
>> +     u32 img_fmt;
>> +     enum tegra_image_dt img_dt;
>> +     u32 fourcc;
>> +     __u8 description[32];
>> +};
>> +
>> +#define      TEGRA_VIDEO_FORMAT(VF_CODE, BPP, MBUS_CODE, FRAC_BPP_NUM,       \
>> +     FRAC_BPP_DEN, FORMAT, DATA_TYPE, FOURCC, DESCRIPTION)           \
>> +{                                                                    \
>> +     TEGRA_VF_##VF_CODE,                                             \
>> +     BPP,                                                            \
>> +     MEDIA_BUS_FMT_##MBUS_CODE,                                      \
>> +     {FRAC_BPP_NUM, FRAC_BPP_DEN},                                   \
>> +     TEGRA_IMAGE_FORMAT_##FORMAT,                                    \
>> +     TEGRA_IMAGE_DT_##DATA_TYPE,                                     \
>> +     V4L2_PIX_FMT_##FOURCC,                                          \
>> +     DESCRIPTION,                                                    \
>> +}
>> +
>> +u32 tegra_core_get_word_count(unsigned int frame_width,
>> +                           const struct tegra_video_format *fmt);
>> +#endif
>> diff --git a/drivers/staging/media/tegra/tegra-csi.c b/drivers/staging/media/tegra/tegra-csi.c
>> new file mode 100644
>> index 000000000000..f6153acd60cb
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/tegra-csi.c
>> @@ -0,0 +1,380 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk/tegra.h>
>> +#include <linux/device.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/host1x.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include "csi.h"
>> +#include "mc_common.h"
>> +#include "csi2_fops.h"
>> +#include "host1x-video.h"
>> +#include "vi2_registers.h"
>> +
>> +static inline struct tegra_csi_device *
>> +host1x_client_to_csi(struct host1x_client *client)
>> +{
>> +     return container_of(client, struct tegra_csi_device, client);
>> +}
>> +
>> +static inline struct tegra_csi_channel *to_csi_chan(struct v4l2_subdev *subdev)
>> +{
>> +     return container_of(subdev, struct tegra_csi_channel, subdev);
>> +}
>> +
>> +/*
>> + * V4L2 Subdevice Video Operations
>> + */
>> +static int tegra_csi_s_stream(struct v4l2_subdev *subdev, int enable)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +     struct tegra_channel *chan = subdev->host_priv;
>> +     u8 pg_mode = chan->vi->pg_mode;
>> +
>> +     return csi->fops->csi_start_streaming(csi_chan, pg_mode, enable);
>> +}
>> +
>> +/*
>> + * Only use this subdevice media bus ops for test pattern generator,
>> + * because CSI device is an separated subdevice which has 6 source
>> + * pads to generate test pattern.
>> + */
>> +static struct v4l2_mbus_framefmt tegra_csi_tpg_fmts[] = {
>> +     {
>> +             TEGRA_DEF_WIDTH,
>> +             TEGRA_DEF_HEIGHT,
>> +             MEDIA_BUS_FMT_SRGGB10_1X10,
>> +             V4L2_FIELD_NONE,
>> +             V4L2_COLORSPACE_SRGB
>> +     },
>> +     {
>> +             TEGRA_DEF_WIDTH,
>> +             TEGRA_DEF_HEIGHT,
>> +             MEDIA_BUS_FMT_RGB888_1X32_PADHI,
>> +             V4L2_FIELD_NONE,
>> +             V4L2_COLORSPACE_SRGB
>> +     }
>> +
>> +};
>> +
>> +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>> +     {1280, 720},
>> +     {1920, 1080},
>> +     {3840, 2160},
>> +};
>> +
>> +/*
>> + * V4L2 Subdevice Pad Operations
>> + */
>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>> +                             struct v4l2_subdev_pad_config *cfg,
>> +                             struct v4l2_subdev_format *fmt)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +
>> +     mutex_lock(&csi_chan->format_lock);
>> +     memcpy(fmt, &csi_chan->ports->format,
>> +            sizeof(struct v4l2_mbus_framefmt));
>> +     mutex_unlock(&csi_chan->format_lock);
>> +
>> +     return 0;
>> +}
>> +
>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>> +                                struct v4l2_mbus_framefmt *mfmt)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +     const struct v4l2_frmsize_discrete *sizes;
>> +     int i, j;
>> +
>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>> +
>> +             if (mfmt->code == mbus_fmt->code) {
>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>> +                             sizes = &tegra_csi_tpg_sizes[j];
>> +                             if (mfmt->width == sizes->width &&
>> +                                 mfmt->height == sizes->height) {
>> +                                     return;
>> +                             }
>> +                     }
>> +             }
>> +
>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>> +     }
>> +
>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>> +}
>> +
>> +static int tegra_csi_set_format(struct v4l2_subdev *subdev,
>> +                             struct v4l2_subdev_pad_config *cfg,
>> +                             struct v4l2_subdev_format *fmt)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +     struct v4l2_mbus_framefmt *format = &fmt->format;
>> +
>> +     tegra_csi_try_mbus_fmt(subdev, format);
>> +
>> +     if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
>> +             return 0;
>> +
>> +     mutex_lock(&csi_chan->format_lock);
>> +     memcpy(&csi_chan->ports->format, format,
>> +            sizeof(struct v4l2_mbus_framefmt));
> Just do: csi_chan->ports->format = *format;
>
>> +     mutex_unlock(&csi_chan->format_lock);
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * V4L2 Subdevice Operations
>> + */
>> +static struct v4l2_subdev_video_ops tegra_csi_video_ops = {
>> +     .s_stream = tegra_csi_s_stream,
>> +};
>> +
>> +static struct v4l2_subdev_pad_ops tegra_csi_pad_ops = {
>> +     .get_fmt                = tegra_csi_get_format,
>> +     .set_fmt                = tegra_csi_set_format,
>> +};
>> +
>> +static struct v4l2_subdev_ops tegra_csi_ops = {
>> +     .video  = &tegra_csi_video_ops,
>> +     .pad    = &tegra_csi_pad_ops,
>> +};
>> +
>> +/*
>> + * Media Operations
>> + */
>> +static const struct media_entity_operations tegra_csi_media_ops = {
>> +     .link_validate = v4l2_subdev_link_validate,
>> +};
>> +
>> +static int tegra_csi_tpg_channels_alloc(struct tegra_csi_device *csi)
>> +{
>> +     struct device_node *node = csi->dev->of_node;
>> +     unsigned int port_num;
>> +     int ret;
>> +     struct tegra_csi_channel *item;
>> +     unsigned int tpg_channels = csi->soc_data->num_tpg_channels;
>> +
>> +     /* allocate CSI channel for each CSI x2 ports */
>> +     for (port_num = 0; port_num < tpg_channels; port_num++) {
>> +             item = devm_kzalloc(csi->dev, sizeof(*item), GFP_KERNEL);
>> +             if (!item) {
>> +                     ret = -ENOMEM;
>> +                     goto error;
>> +             }
>> +
>> +             list_add_tail(&item->list, &csi->csi_chans);
>> +             item->csi = csi;
>> +             item->csi_port_num = port_num;
>> +             item->numlanes = 2;
>> +             item->of_node = node;
>> +             item->numpads = 1;
>> +             item->pads[0].flags = MEDIA_PAD_FL_SOURCE;
>> +     }
>> +
>> +     return 0;
>> +
>> +error:
>> +     list_for_each_entry(item, &csi->csi_chans, list)
>> +             list_del(&item->list);
>> +
>> +     return ret;
>> +}
>> +
>> +static int tegra_csi_channel_init(struct tegra_csi_channel *chan)
>> +{
>> +     struct tegra_csi_device *csi = chan->csi;
>> +     struct v4l2_subdev *subdev;
>> +     int ret;
>> +
>> +     chan->ports = devm_kzalloc(csi->dev, sizeof(struct tegra_csi_port),
>> +                                GFP_KERNEL);
>> +     if (!chan->ports)
>> +             return -ENOMEM;
>> +
>> +     mutex_init(&chan->format_lock);
>> +
>> +     /* initialize the default format */
>> +     chan->ports->format.code = TEGRA_VF_DEF;
>> +     chan->ports->format.field = V4L2_FIELD_NONE;
>> +     chan->ports->format.colorspace = V4L2_COLORSPACE_SRGB;
>> +     chan->ports->format.width = TEGRA_DEF_WIDTH;
>> +     chan->ports->format.height = TEGRA_DEF_HEIGHT;
>> +     chan->ports->lanes = chan->numlanes;
>> +
>> +     /* initialize V4L2 subdevice and media entity */
>> +     subdev = &chan->subdev;
>> +     v4l2_subdev_init(subdev, &tegra_csi_ops);
>> +     subdev->dev = csi->dev;
>> +     snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "%s-%d", "tpg",
>> +              chan->csi_port_num);
>> +
>> +     v4l2_set_subdevdata(subdev, chan);
>> +     subdev->fwnode = of_fwnode_handle(chan->of_node);
>> +     subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +     subdev->entity.ops = &tegra_csi_media_ops;
>> +
>> +     /* initialize media entity pads */
>> +     ret = media_entity_pads_init(&subdev->entity, chan->numpads,
>> +                                  chan->pads);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     ret = v4l2_async_register_subdev(subdev);
>> +     if (ret < 0) {
>> +             dev_err(csi->dev, "failed to register subdev\n");
>> +             media_entity_cleanup(&subdev->entity);
>> +     }
>> +
>> +     return ret;
>> +}
>> +
>> +void tegra_csi_error_status(struct v4l2_subdev *subdev)
>> +{
>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>> +     struct tegra_csi_device *csi = csi_chan->csi;
>> +
>> +     csi->fops->csi_err_status(csi_chan);
>> +}
>> +EXPORT_SYMBOL(tegra_csi_error_status);
>> +
>> +static int tegra_csi_init(struct host1x_client *client)
>> +{
>> +     struct tegra_csi_device *csi = host1x_client_to_csi(client);
>> +     struct tegra_camera *cam = dev_get_drvdata(client->host);
>> +     struct tegra_csi_channel *item;
>> +     int ret;
>> +
>> +     cam->csi = csi;
>> +
>> +     INIT_LIST_HEAD(&csi->csi_chans);
>> +
>> +     ret = tegra_csi_tpg_channels_alloc(csi);
>> +     if (ret < 0)
>> +             return ret;
>> +
>> +     list_for_each_entry(item, &csi->csi_chans, list) {
>> +             ret = tegra_csi_channel_init(item);
>> +             if (ret)
>> +                     return ret;
>> +     }
>> +
>> +     ret = csi->fops->hw_init(csi);
>> +     if (ret)
>> +             return ret;
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_csi_exit(struct host1x_client *client)
>> +{
>> +     struct tegra_camera *cam = dev_get_drvdata(client->host);
>> +     struct v4l2_subdev *subdev;
>> +     struct tegra_csi_channel *chan;
>> +
>> +     if (!cam->csi)
>> +             return 0;
>> +
>> +     list_for_each_entry(chan, &cam->csi->csi_chans, list) {
>> +             mutex_destroy(&chan->format_lock);
>> +             subdev = &chan->subdev;
>> +             media_entity_cleanup(&subdev->entity);
>> +             v4l2_async_unregister_subdev(subdev);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static const struct host1x_client_ops csi_client_ops = {
>> +     .init = tegra_csi_init,
>> +     .exit = tegra_csi_exit,
>> +};
>> +
>> +static int tegra_csi_probe(struct platform_device *pdev)
>> +{
>> +     struct tegra_csi_device *csi;
>> +     struct resource *res;
>> +     int ret;
>> +
>> +     csi = devm_kzalloc(&pdev->dev, sizeof(*csi), GFP_KERNEL);
>> +     if (!csi)
>> +             return -ENOMEM;
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     csi->iomem = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(csi->iomem))
>> +             return PTR_ERR(csi->iomem);
>> +
>> +     csi->soc_data = of_device_get_match_data(&pdev->dev);
>> +     if (!csi->soc_data) {
>> +             dev_info(&pdev->dev, "No platform data\n\n");
>> +             return -ENODATA;
>> +     }
>> +
>> +     csi->dev = &pdev->dev;
>> +     csi->fops = csi->soc_data->csi_fops;
>> +     platform_set_drvdata(pdev, csi);
>> +
>> +     /* initialize host1x interface */
>> +     INIT_LIST_HEAD(&csi->client.list);
>> +     csi->client.ops = &csi_client_ops;
>> +     csi->client.dev = &pdev->dev;
>> +
>> +     ret = host1x_client_register(&csi->client);
>> +     if (ret < 0) {
>> +             dev_err(csi->dev, "failed to register host1x client: %d\n",
>> +                     ret);
>> +             return -ENODEV;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static int tegra_csi_remove(struct platform_device *pdev)
>> +{
>> +     struct tegra_csi_device *csi = platform_get_drvdata(pdev);
>> +
>> +     host1x_client_unregister(&csi->client);
>> +
>> +     return 0;
>> +}
>> +
>> +static struct tegra_csi_soc_data tegra210_csi_data = {
>> +     .csi_fops = &csi2_fops,
>> +     .cil_max_clk_hz = TEGRA210_CSI_CIL_CLK_MAX,
>> +     .num_tpg_channels = TEGRA210_MAX_CHANNELS,
>> +};
>> +
>> +static const struct of_device_id tegra_csi_of_id_table[] = {
>> +     { .compatible = "nvidia,tegra210-csi", .data = &tegra210_csi_data },
>> +     { }
>> +};
>> +MODULE_DEVICE_TABLE(of, tegra_csi_of_id_table);
>> +
>> +struct platform_driver tegra_csi_driver = {
>> +     .driver = {
>> +             .name           = "tegra-csi",
>> +             .of_match_table = tegra_csi_of_id_table,
>> +     },
>> +     .probe                  = tegra_csi_probe,
>> +     .remove                 = tegra_csi_remove,
>> +};
>> +
>> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@nvidia.com>");
>> +MODULE_DESCRIPTION("NVIDIA Tegra CSI Device Driver");
>> +MODULE_LICENSE("GPL v2");
> <snip>
>
> This is just from a quick review. I see a number of areas that I want
> to discuss in more detail, I hope to get to that tomorrow or Friday at
> the latest. I'm currently trying to setup my Jetson TX1 board so I can
> test this series.
>
> Regards,
>
>          Hans

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 10:31             ` Helen Koike
@ 2020-01-29 17:49               ` Sowjanya Komatineni
  2020-01-29 18:15                 ` Sowjanya Komatineni
  2020-01-29 18:29                 ` Helen Koike
  0 siblings, 2 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29 17:49 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/29/20 2:31 AM, Helen Koike wrote:
> External email: Use caution opening links or attachments
>
>
> On 1/29/20 12:11 AM, Sowjanya Komatineni wrote:
>> On 1/28/20 5:05 PM, Helen Koike wrote:
>>> External email: Use caution opening links or attachments
>>>
>>>
>>> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>>>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>>>> External email: Use caution opening links or attachments
>>>>>>
>>>>>>
>>>>>> Hi Sowjanya,
>>>>>>
>>>>>> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>>>>>>
>>>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>>>
>>>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>>>> capture from an external camera sensor connected to CSI or from
>>>>>>> built-in test pattern generator.
>>>>>>>
>>>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>>>
>>>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>>>
>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
>>>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>>>> digraph board {
>>>>>           rankdir=TB
>>>>>           n00000001 [label="54080000.vi-output-0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>>>>           n00000005 [label="54080000.vi-output-1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>>>>           n00000009 [label="54080000.vi-output-2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>>>>>           n0000000d [label="54080000.vi-output-3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>>>>           n00000011 [label="54080000.vi-output-4\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
>>>>>           n00000015 [label="54080000.vi-output-5\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
>>>>>           n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>           n00000019:port0 -> n00000001
>>>>>           n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>           n0000001d:port0 -> n00000005
>>>>>           n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>           n00000021:port0 -> n00000009
>>>>>           n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>           n00000025:port0 -> n0000000d
>>>>>           n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>           n00000029:port0 -> n00000011
>>>>>           n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>           n0000002d:port0 -> n00000015
>>>>> }
>>>>>
>>>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>>>>>>> new file mode 100644
>>>>>>> index 000000000000..84d28e6f4362
>>>>>>> --- /dev/null
>>>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>>>> @@ -0,0 +1,33 @@
>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>> +/*
>>>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>>>> + */
>>>>>>> +
>>>>>>> +#ifndef HOST1X_VIDEO_H
>>>>>>> +#define HOST1X_VIDEO_H 1
>>>>>>> +
>>>>>>> +#include <linux/host1x.h>
>>>>>>> +
>>>>>>> +#include <media/media-device.h>
>>>>>>> +#include <media/media-entity.h>
>>>>>>> +#include <media/v4l2-async.h>
>>>>>>> +#include <media/v4l2-ctrls.h>
>>>>>>> +#include <media/v4l2-device.h>
>>>>>>> +#include <media/v4l2-dev.h>
>>>>>>> +#include <media/videobuf2-v4l2.h>
>>>>>>> +
>>>>>>> +#include "tegra-vi.h"
>>>>>>> +#include "csi.h"
>>>>>>> +
>>>>>>> +struct tegra_camera {
>>>>>>> +     struct v4l2_device v4l2_dev;
>>>>>>> +     struct media_device media_dev;
>>>>>>> +     struct device *dev;
>>>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>>>
>>>> Will fix in v2
>>>>>>> +     struct tegra_vi *vi;
>>>>>>> +     struct tegra_csi_device *csi;
>>>>>>> +};
>>>>>>> +
>>>>>>> +
>>>>>>> +#define to_tegra_channel(vdev) \
>>>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>>>> Why not inline instead of define. Inlines has the advantage of checking types.
>>>> Will change in v2
>>>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>>>> +                                   struct v4l2_pix_format *pix,
>>>>>>> +                                   const struct tegra_video_format **vfmt)
>>>>>>> +{
>>>>>>> +     const struct tegra_video_format *fmt_info;
>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>>>> +
>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>>>> +     if (!pad_cfg)
>>>>>>> +             return -ENOMEM;
>>>>>>> +
>>>>>>> +     /*
>>>>>>> +      * Retrieve format information and select the default format if the
>>>>>>> +      * requested format isn't supported.
>>>>>>> +      */
>>>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>>>>>>> +     if (!fmt_info) {
>>>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>>>> + pix->pixelformat);
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     /* Change this when start adding interlace format support */
>>>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>>>> +     fmt.pad = 0;
>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>>>> As fas as I understand, entities formats should be independent, it is up to link_validate
>>>>>> to check formats between entities.
>>>>>> The capture shouldn't change the format of the subdevice.
>>>>>>
>>>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source and VI is sink.
>>>>
>>>> link validation happens only for sink ends of the link.
>>> And what is the problem with it being on the sink end?
>>> You just need to implement custom link validation in tegra_csi_media_ops that also checks the format
>>> between the capture and the subdevice, no? Unless I missunderstood something here (which is quite possible).
>>>
>>> Examples:
>>> drivers/staging/media/rkisp1/rkisp1-capture.c - rkisp1_capture_link_validate()
>>> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
>>> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - sun6i_video_link_validate()
>>>
>>> Regards,
>>> Helen
>>>
>> But if we move subdevice side format/size check into its link_validation, any incorrect image size set thru set-fmt-video will be taken and get-fmt-video will also show same as it doesn't validate formats/sizes supported by CSI subdev during this time. link validation happens during pipeline start. So thought to prevent accepting incorrect format/size during set-fmt-video/get-fmt-video.
> This is how media API is designed, formats shouldn't propagate between entities, it is up to userspace to configure pads
> correctly. And if formats of the pads don't match, stream fails during pipeline start, and userspace receive -EPIPE error.
>
> According to the docs: https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/dev-subdev.html
>
> "Formats are not propagated across links, as that would involve propagating them from one sub-device file handle to another. Applications must then take care to configure both ends of every link explicitly with compatible formats. Identical formats on the two ends of a link are guaranteed to be compatible. Drivers are free to accept different formats matching device requirements as being compatible."
>
> Perhaps you want to add support of this driver in libcamera.org to make it easier to userspace.
>
> Regards,
> Helen

I see in doc, Format Negotiation says drivers can propagate formats 
inside sub-devices. When try/active format is set on pad, corresponding 
format on other pads of same subdevice can be modified by the driver as 
long as formats are propagated from Sink pads to source pads.

When application configures front-end sink pad format, driver can 
propagate the format to front-end source pad.

VI is Sink and CSI is source subdev here for TPG.

Currently set_fmt/get_fmt from vi channel invokes Source subdevice 
set_fmt/get_fmt which is CSI in this case of TPG.

>> Other than this I don't see any issue moving it to link_validation.
>>
>>
>>>> So with CSI subdev set_fmt sets width/height to default incase if width/height is not from one of the supported sizes.
>>>>
>>>>>>> +
>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>>>>>>> +                             &pix->bytesperline);
>>>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>>>> +
>>>>>>> +     if (vfmt)
>>>>>>> +             *vfmt = fmt_info;
>>>>>>> +
>>>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>>>> +                                 struct v4l2_format *format)
>>>>>>> +{
>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>> +
>>>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>>>> +                                 struct v4l2_format *format)
>>>>>>> +{
>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>> +     const struct tegra_video_format *info;
>>>>>>> +     int ret;
>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>>>> +
>>>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>>>> +             return -EBUSY;
>>>>>>> +
>>>>>>> +     /* get supported format by try_fmt */
>>>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>>>> +     if (ret)
>>>>>>> +             return ret;
>>>>>>> +
>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>> +
>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>>>> +     fmt.pad = 0;
>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>>>> same here.
>>>>>>
>>>> Calling subdev set_fmt here for the same reason as explained above.
>>>>>>> +
>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>> +     chan->format = *pix;
>>>>>>> +     chan->fmtinfo = info;
>>>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>>>> +                                 pix->height, info->fourcc,
>>>>>>> +                                 &info->bpp,
>>>>>>> +                                 pix->bytesperline);
>>>>>>> +     *pix = chan->format;
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>>>> +                                 struct v4l2_input *inp)
>>>>>>> +{
>>>>>>> +     /* Currently driver supports internal TPG only */
>>>>>>> +     if (inp->index != 0)
>>>>>> just
>>>>>> if (inp->index)
>>>>>>
>>>> Will update in v2
>>>>>>> +             return -EINVAL;
>>>>>>> +
>>>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>>>> +     /* RAW 10 */
>>>>>>> +     TEGRA_VF_RAW10,
>>>>>>> +     10,
>>>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>> +     {2, 1},
>>>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>>>> +     "RGRG.. GBGB..",
>>>>>> It would be more readable to do:
>>>>>>
>>>>>> .code = TEGRA_VF_RAW10,
>>>>>> .width = 10,
>>>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>
>>>>>> and so on
>>>> Will update in v2
>>>>>>> +};
>>>>>>> +
>>>>>>> +/*
>>>>>>> + * Helper functions
>>>>>>> + */
>>>>>>> +
>>>>>>> +/**
>>>>>>> + * tegra_core_get_default_format - Get default format
>>>>>>> + *
>>>>>>> + * Return: pointer to the format where the default format needs
>>>>>>> + * to be filled in.
>>>>>>> + */
>>>>>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>>>>>> +{
>>>>>>> +     return &tegra_default_format;
>>>>>>> +}
>>>>>> This is only used in tegra-channel.c, why not to declare it there as static?
>>>>>>
>>>> Will move all video format retrieval helper functions to corresponding file as static in v2
>>>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>>>> +     {1280, 720},
>>>>>>> +     {1920, 1080},
>>>>>>> +     {3840, 2160},
>>>>>>> +};
>>>>>>> +
>>>>>>> +/*
>>>>>>> + * V4L2 Subdevice Pad Operations
>>>>>>> + */
>>>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>>>> +{
>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>> +
>>>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>>>> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>>>>>>
>>>> This is on CSI v4l2 subdevice side during format updates
>>>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>>>> I would prefer just:
>>>>>> *fmt = *csi_chan->ports->format;
>>>>>>
>>>>>> I think it is easier to read IMHO.
>>>>>> same in tegra_csi_set_format().
>>>>>>
>>>> Will fix in v2
>>>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>>>> +
>>>>>>> +     return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>>>> +{
>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>>>> +     int i, j;
>>>>>> unsigned
>>>>>>
>>>> Will fix in v2
>>>>>>> +
>>>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>>>>>>> +
>>>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>>>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>>>> +                             if (mfmt->width == sizes->width &&
>>>>>>> +                                 mfmt->height == sizes->height) {
>>>>>>> +                                     return;
>>>>>>> +                             }
>>>>>>> +                     }
>>>>>>> +             }
>>>>>>> +
>>>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>>>>>>> +     }
>>>>>>> +
>>>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>>>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>>>>>>> +}
>>>>>>> +
>>>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 17:49               ` Sowjanya Komatineni
@ 2020-01-29 18:15                 ` Sowjanya Komatineni
  2020-01-29 18:46                   ` Helen Koike
  2020-01-29 18:29                 ` Helen Koike
  1 sibling, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29 18:15 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/29/20 9:49 AM, Sowjanya Komatineni wrote:
>
> On 1/29/20 2:31 AM, Helen Koike wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 1/29/20 12:11 AM, Sowjanya Komatineni wrote:
>>> On 1/28/20 5:05 PM, Helen Koike wrote:
>>>> External email: Use caution opening links or attachments
>>>>
>>>>
>>>> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>>>>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>>>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>>>>> External email: Use caution opening links or attachments
>>>>>>>
>>>>>>>
>>>>>>> Hi Sowjanya,
>>>>>>>
>>>>>>> I just took a really quick look, I didn't check the driver in 
>>>>>>> deep, so just some small comments below.
>>>>>>>
>>>>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>>>>
>>>>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>>>>> capture from an external camera sensor connected to CSI or from
>>>>>>>> built-in test pattern generator.
>>>>>>>>
>>>>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>>>>
>>>>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>>>>
>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>> Could you send us the output of media-ctl --print-dot ? So we 
>>>>>>> can view the media topology easily?
>>>>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>>>>> digraph board {
>>>>>>           rankdir=TB
>>>>>>           n00000001 [label="54080000.vi-output-0\n/dev/video0", 
>>>>>> shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000005 [label="54080000.vi-output-1\n/dev/video1", 
>>>>>> shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000009 [label="54080000.vi-output-2\n/dev/video2", 
>>>>>> shape=box, style=filled, fillcolor=yellow]
>>>>>>           n0000000d [label="54080000.vi-output-3\n/dev/video3", 
>>>>>> shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000011 [label="54080000.vi-output-4\n/dev/video4", 
>>>>>> shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000015 [label="54080000.vi-output-5\n/dev/video5", 
>>>>>> shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000019 [label="{{} | tpg-0 | {<port0> 0}}", 
>>>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n00000019:port0 -> n00000001
>>>>>>           n0000001d [label="{{} | tpg-1 | {<port0> 0}}", 
>>>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n0000001d:port0 -> n00000005
>>>>>>           n00000021 [label="{{} | tpg-2 | {<port0> 0}}", 
>>>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n00000021:port0 -> n00000009
>>>>>>           n00000025 [label="{{} | tpg-3 | {<port0> 0}}", 
>>>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n00000025:port0 -> n0000000d
>>>>>>           n00000029 [label="{{} | tpg-4 | {<port0> 0}}", 
>>>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n00000029:port0 -> n00000011
>>>>>>           n0000002d [label="{{} | tpg-5 | {<port0> 0}}", 
>>>>>> shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n0000002d:port0 -> n00000015
>>>>>> }
>>>>>>
>>>>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h 
>>>>>>>> b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>> new file mode 100644
>>>>>>>> index 000000000000..84d28e6f4362
>>>>>>>> --- /dev/null
>>>>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>> @@ -0,0 +1,33 @@
>>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>>> +/*
>>>>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>>>>> + */
>>>>>>>> +
>>>>>>>> +#ifndef HOST1X_VIDEO_H
>>>>>>>> +#define HOST1X_VIDEO_H 1
>>>>>>>> +
>>>>>>>> +#include <linux/host1x.h>
>>>>>>>> +
>>>>>>>> +#include <media/media-device.h>
>>>>>>>> +#include <media/media-entity.h>
>>>>>>>> +#include <media/v4l2-async.h>
>>>>>>>> +#include <media/v4l2-ctrls.h>
>>>>>>>> +#include <media/v4l2-device.h>
>>>>>>>> +#include <media/v4l2-dev.h>
>>>>>>>> +#include <media/videobuf2-v4l2.h>
>>>>>>>> +
>>>>>>>> +#include "tegra-vi.h"
>>>>>>>> +#include "csi.h"
>>>>>>>> +
>>>>>>>> +struct tegra_camera {
>>>>>>>> +     struct v4l2_device v4l2_dev;
>>>>>>>> +     struct media_device media_dev;
>>>>>>>> +     struct device *dev;
>>>>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>>>>
>>>>> Will fix in v2
>>>>>>>> +     struct tegra_vi *vi;
>>>>>>>> +     struct tegra_csi_device *csi;
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +
>>>>>>>> +#define to_tegra_channel(vdev) \
>>>>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>>>>> Why not inline instead of define. Inlines has the advantage of 
>>>>>>> checking types.
>>>>> Will change in v2
>>>>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>>>>> +                                   struct v4l2_pix_format *pix,
>>>>>>>> +                                   const struct 
>>>>>>>> tegra_video_format **vfmt)
>>>>>>>> +{
>>>>>>>> +     const struct tegra_video_format *fmt_info;
>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>>>>> +
>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>>>>> +     if (!pad_cfg)
>>>>>>>> +             return -ENOMEM;
>>>>>>>> +
>>>>>>>> +     /*
>>>>>>>> +      * Retrieve format information and select the default 
>>>>>>>> format if the
>>>>>>>> +      * requested format isn't supported.
>>>>>>>> +      */
>>>>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, 
>>>>>>>> pix->pixelformat);
>>>>>>>> +     if (!fmt_info) {
>>>>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>>>>> + pix->pixelformat);
>>>>>>>> +     }
>>>>>>>> +
>>>>>>>> +     /* Change this when start adding interlace format support */
>>>>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>>>>> +     fmt.pad = 0;
>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>>>>> As fas as I understand, entities formats should be independent, 
>>>>>>> it is up to link_validate
>>>>>>> to check formats between entities.
>>>>>>> The capture shouldn't change the format of the subdevice.
>>>>>>>
>>>>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is 
>>>>> source and VI is sink.
>>>>>
>>>>> link validation happens only for sink ends of the link.
>>>> And what is the problem with it being on the sink end?
>>>> You just need to implement custom link validation in 
>>>> tegra_csi_media_ops that also checks the format
>>>> between the capture and the subdevice, no? Unless I missunderstood 
>>>> something here (which is quite possible).
>>>>
>>>> Examples:
>>>> drivers/staging/media/rkisp1/rkisp1-capture.c - 
>>>> rkisp1_capture_link_validate()
>>>> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
>>>> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - 
>>>> sun6i_video_link_validate()
>>>>
>>>> Regards,
>>>> Helen
>>>>
>>> But if we move subdevice side format/size check into its 
>>> link_validation, any incorrect image size set thru set-fmt-video 
>>> will be taken and get-fmt-video will also show same as it doesn't 
>>> validate formats/sizes supported by CSI subdev during this time. 
>>> link validation happens during pipeline start. So thought to prevent 
>>> accepting incorrect format/size during set-fmt-video/get-fmt-video.
>> This is how media API is designed, formats shouldn't propagate 
>> between entities, it is up to userspace to configure pads
>> correctly. And if formats of the pads don't match, stream fails 
>> during pipeline start, and userspace receive -EPIPE error.
>>
>> According to the docs: 
>> https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/dev-subdev.html
>>
>> "Formats are not propagated across links, as that would involve 
>> propagating them from one sub-device file handle to another. 
>> Applications must then take care to configure both ends of every link 
>> explicitly with compatible formats. Identical formats on the two ends 
>> of a link are guaranteed to be compatible. Drivers are free to accept 
>> different formats matching device requirements as being compatible."
>>
>> Perhaps you want to add support of this driver in libcamera.org to 
>> make it easier to userspace.
>>
>> Regards,
>> Helen
>
> I see in doc, Format Negotiation says drivers can propagate formats 
> inside sub-devices. When try/active format is set on pad, 
> corresponding format on other pads of same subdevice can be modified 
> by the driver as long as formats are propagated from Sink pads to 
> source pads.
>
> When application configures front-end sink pad format, driver can 
> propagate the format to front-end source pad.
>
> VI is Sink and CSI is source subdev here for TPG.
>
> Currently set_fmt/get_fmt from vi channel invokes Source subdevice 
> set_fmt/get_fmt which is CSI in this case of TPG.
>
Also regarding link_validation, it seems like its called for every link 
in pipeline where both end of links are v4l2 subdevices.

Driver should take care of format validation between sub-device and 
video nodes.

This driver TPG is b/w Tegra CSI (subdevice) and VI (video entity).

So I don't think we can use link_validate for format 
validation/negotiation b/w video entity and subdevice.

Currently driver follows propagating format sink pad (VI) to source pad 
and on CSI source subdev we update format to default if format size 
doesn't match one of the TPG format sizes.

Please let me know if I am missing anything to understand your feedback.


>>> Other than this I don't see any issue moving it to link_validation.
>>>
>>>
>>>>> So with CSI subdev set_fmt sets width/height to default incase if 
>>>>> width/height is not from one of the supported sizes.
>>>>>
>>>>>>>> +
>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, 
>>>>>>>> &pix->width, &pix->height,
>>>>>>>> + &pix->bytesperline);
>>>>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>>>>> +
>>>>>>>> +     if (vfmt)
>>>>>>>> +             *vfmt = fmt_info;
>>>>>>>> +
>>>>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>>>>> +
>>>>>>>> +     return 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>> +{
>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>> +
>>>>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, 
>>>>>>>> NULL);
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>> +{
>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>> +     const struct tegra_video_format *info;
>>>>>>>> +     int ret;
>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>>>>> +
>>>>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>>>>> +             return -EBUSY;
>>>>>>>> +
>>>>>>>> +     /* get supported format by try_fmt */
>>>>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>>>>> +     if (ret)
>>>>>>>> +             return ret;
>>>>>>>> +
>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>> +
>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>>>>> +     fmt.pad = 0;
>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>>>>> same here.
>>>>>>>
>>>>> Calling subdev set_fmt here for the same reason as explained above.
>>>>>>>> +
>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>> +     chan->format = *pix;
>>>>>>>> +     chan->fmtinfo = info;
>>>>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>>>>> +                                 pix->height, info->fourcc,
>>>>>>>> +                                 &info->bpp,
>>>>>>>> + pix->bytesperline);
>>>>>>>> +     *pix = chan->format;
>>>>>>>> +
>>>>>>>> +     return 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>>>>> +                                 struct v4l2_input *inp)
>>>>>>>> +{
>>>>>>>> +     /* Currently driver supports internal TPG only */
>>>>>>>> +     if (inp->index != 0)
>>>>>>> just
>>>>>>> if (inp->index)
>>>>>>>
>>>>> Will update in v2
>>>>>>>> +             return -EINVAL;
>>>>>>>> +
>>>>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>>>>> +
>>>>>>>> +     return 0;
>>>>>>>> +}
>>>>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>>>>> +     /* RAW 10 */
>>>>>>>> +     TEGRA_VF_RAW10,
>>>>>>>> +     10,
>>>>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>> +     {2, 1},
>>>>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>>>>> +     "RGRG.. GBGB..",
>>>>>>> It would be more readable to do:
>>>>>>>
>>>>>>> .code = TEGRA_VF_RAW10,
>>>>>>> .width = 10,
>>>>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>
>>>>>>> and so on
>>>>> Will update in v2
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +/*
>>>>>>>> + * Helper functions
>>>>>>>> + */
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * tegra_core_get_default_format - Get default format
>>>>>>>> + *
>>>>>>>> + * Return: pointer to the format where the default format needs
>>>>>>>> + * to be filled in.
>>>>>>>> + */
>>>>>>>> +const struct tegra_video_format 
>>>>>>>> *tegra_core_get_default_format(void)
>>>>>>>> +{
>>>>>>>> +     return &tegra_default_format;
>>>>>>>> +}
>>>>>>> This is only used in tegra-channel.c, why not to declare it 
>>>>>>> there as static?
>>>>>>>
>>>>> Will move all video format retrieval helper functions to 
>>>>> corresponding file as static in v2
>>>>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>>>>> +     {1280, 720},
>>>>>>>> +     {1920, 1080},
>>>>>>>> +     {3840, 2160},
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +/*
>>>>>>>> + * V4L2 Subdevice Pad Operations
>>>>>>>> + */
>>>>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>>>>> +{
>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>> +
>>>>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>>>>> Do you need this lock? I think there is already a serialization 
>>>>>>> in the ioctls in place (to be confirmed).
>>>>>>>
>>>>> This is on CSI v4l2 subdevice side during format updates
>>>>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>>>>> I would prefer just:
>>>>>>> *fmt = *csi_chan->ports->format;
>>>>>>>
>>>>>>> I think it is easier to read IMHO.
>>>>>>> same in tegra_csi_set_format().
>>>>>>>
>>>>> Will fix in v2
>>>>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>>>>> +
>>>>>>>> +     return 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>>>>> +{
>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>>>>> +     int i, j;
>>>>>>> unsigned
>>>>>>>
>>>>> Will fix in v2
>>>>>>>> +
>>>>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = 
>>>>>>>> &tegra_csi_tpg_fmts[i];
>>>>>>>> +
>>>>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>>>>> +                     for (j = 0; j < 
>>>>>>>> ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>>>>> +                             if (mfmt->width == sizes->width &&
>>>>>>>> +                                 mfmt->height == sizes->height) {
>>>>>>>> +                                     return;
>>>>>>>> +                             }
>>>>>>>> +                     }
>>>>>>>> +             }
>>>>>>>> +
>>>>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 
>>>>>>>> video format\n");
>>>>>>>> +     }
>>>>>>>> +
>>>>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT 
>>>>>>>> (1920x1080)\n");
>>>>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct 
>>>>>>>> v4l2_mbus_framefmt));
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 17:49               ` Sowjanya Komatineni
  2020-01-29 18:15                 ` Sowjanya Komatineni
@ 2020-01-29 18:29                 ` Helen Koike
  2020-01-29 18:46                   ` Sowjanya Komatineni
  1 sibling, 1 reply; 55+ messages in thread
From: Helen Koike @ 2020-01-29 18:29 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel



On 1/29/20 3:49 PM, Sowjanya Komatineni wrote:
> 
> On 1/29/20 2:31 AM, Helen Koike wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 1/29/20 12:11 AM, Sowjanya Komatineni wrote:
>>> On 1/28/20 5:05 PM, Helen Koike wrote:
>>>> External email: Use caution opening links or attachments
>>>>
>>>>
>>>> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>>>>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>>>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>>>>> External email: Use caution opening links or attachments
>>>>>>>
>>>>>>>
>>>>>>> Hi Sowjanya,
>>>>>>>
>>>>>>> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>>>>>>>
>>>>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>>>>
>>>>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>>>>> capture from an external camera sensor connected to CSI or from
>>>>>>>> built-in test pattern generator.
>>>>>>>>
>>>>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>>>>
>>>>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>>>>
>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
>>>>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>>>>> digraph board {
>>>>>>           rankdir=TB
>>>>>>           n00000001 [label="54080000.vi-output-0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000005 [label="54080000.vi-output-1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000009 [label="54080000.vi-output-2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>>>>>>           n0000000d [label="54080000.vi-output-3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000011 [label="54080000.vi-output-4\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000015 [label="54080000.vi-output-5\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
>>>>>>           n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n00000019:port0 -> n00000001
>>>>>>           n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n0000001d:port0 -> n00000005
>>>>>>           n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n00000021:port0 -> n00000009
>>>>>>           n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n00000025:port0 -> n0000000d
>>>>>>           n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n00000029:port0 -> n00000011
>>>>>>           n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>           n0000002d:port0 -> n00000015
>>>>>> }
>>>>>>
>>>>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>> new file mode 100644
>>>>>>>> index 000000000000..84d28e6f4362
>>>>>>>> --- /dev/null
>>>>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>> @@ -0,0 +1,33 @@
>>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>>> +/*
>>>>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>>>>> + */
>>>>>>>> +
>>>>>>>> +#ifndef HOST1X_VIDEO_H
>>>>>>>> +#define HOST1X_VIDEO_H 1
>>>>>>>> +
>>>>>>>> +#include <linux/host1x.h>
>>>>>>>> +
>>>>>>>> +#include <media/media-device.h>
>>>>>>>> +#include <media/media-entity.h>
>>>>>>>> +#include <media/v4l2-async.h>
>>>>>>>> +#include <media/v4l2-ctrls.h>
>>>>>>>> +#include <media/v4l2-device.h>
>>>>>>>> +#include <media/v4l2-dev.h>
>>>>>>>> +#include <media/videobuf2-v4l2.h>
>>>>>>>> +
>>>>>>>> +#include "tegra-vi.h"
>>>>>>>> +#include "csi.h"
>>>>>>>> +
>>>>>>>> +struct tegra_camera {
>>>>>>>> +     struct v4l2_device v4l2_dev;
>>>>>>>> +     struct media_device media_dev;
>>>>>>>> +     struct device *dev;
>>>>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>>>>
>>>>> Will fix in v2
>>>>>>>> +     struct tegra_vi *vi;
>>>>>>>> +     struct tegra_csi_device *csi;
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +
>>>>>>>> +#define to_tegra_channel(vdev) \
>>>>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>>>>> Why not inline instead of define. Inlines has the advantage of checking types.
>>>>> Will change in v2
>>>>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>>>>> +                                   struct v4l2_pix_format *pix,
>>>>>>>> +                                   const struct tegra_video_format **vfmt)
>>>>>>>> +{
>>>>>>>> +     const struct tegra_video_format *fmt_info;
>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>>>>> +
>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>>>>> +     if (!pad_cfg)
>>>>>>>> +             return -ENOMEM;
>>>>>>>> +
>>>>>>>> +     /*
>>>>>>>> +      * Retrieve format information and select the default format if the
>>>>>>>> +      * requested format isn't supported.
>>>>>>>> +      */
>>>>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>>>>>>>> +     if (!fmt_info) {
>>>>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>>>>> + pix->pixelformat);
>>>>>>>> +     }
>>>>>>>> +
>>>>>>>> +     /* Change this when start adding interlace format support */
>>>>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>>>>> +     fmt.pad = 0;
>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>>>>> As fas as I understand, entities formats should be independent, it is up to link_validate
>>>>>>> to check formats between entities.
>>>>>>> The capture shouldn't change the format of the subdevice.
>>>>>>>
>>>>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source and VI is sink.
>>>>>
>>>>> link validation happens only for sink ends of the link.
>>>> And what is the problem with it being on the sink end?
>>>> You just need to implement custom link validation in tegra_csi_media_ops that also checks the format
>>>> between the capture and the subdevice, no? Unless I missunderstood something here (which is quite possible).
>>>>
>>>> Examples:
>>>> drivers/staging/media/rkisp1/rkisp1-capture.c - rkisp1_capture_link_validate()
>>>> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
>>>> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - sun6i_video_link_validate()
>>>>
>>>> Regards,
>>>> Helen
>>>>
>>> But if we move subdevice side format/size check into its link_validation, any incorrect image size set thru set-fmt-video will be taken and get-fmt-video will also show same as it doesn't validate formats/sizes supported by CSI subdev during this time. link validation happens during pipeline start. So thought to prevent accepting incorrect format/size during set-fmt-video/get-fmt-video.
>> This is how media API is designed, formats shouldn't propagate between entities, it is up to userspace to configure pads
>> correctly. And if formats of the pads don't match, stream fails during pipeline start, and userspace receive -EPIPE error.
>>
>> According to the docs: https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/dev-subdev.html
>>
>> "Formats are not propagated across links, as that would involve propagating them from one sub-device file handle to another. Applications must then take care to configure both ends of every link explicitly with compatible formats. Identical formats on the two ends of a link are guaranteed to be compatible. Drivers are free to accept different formats matching device requirements as being compatible."
>>
>> Perhaps you want to add support of this driver in libcamera.org to make it easier to userspace.
>>
>> Regards,
>> Helen
> 
> I see in doc, Format Negotiation says drivers can propagate formats inside sub-devices. When try/active format is set on pad, corresponding format on other pads of same subdevice can be modified by the driver as long as formats are propagated from Sink pads to source pads.
> 
> When application configures front-end sink pad format, driver can propagate the format to front-end source pad.

Yes, the doc says that "Drivers automatically propagate formats **inside** sub-devices", not between subdevices.

So, when a subdevice has a sink pad and a source pad, if user changes the format of the sink pad, the changes
are indeed propagated to the source pad, but not between different subdevices.

> 
> VI is Sink and CSI is source subdev here for TPG.

Vi and TPG are different entities, so you shouldn't propagate between them.

Regards,
Helen

> 
> Currently set_fmt/get_fmt from vi channel invokes Source subdevice set_fmt/get_fmt which is CSI in this case of TPG.
> 
>>> Other than this I don't see any issue moving it to link_validation.
>>>
>>>
>>>>> So with CSI subdev set_fmt sets width/height to default incase if width/height is not from one of the supported sizes.
>>>>>
>>>>>>>> +
>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>>>>>>>> +                             &pix->bytesperline);
>>>>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>>>>> +
>>>>>>>> +     if (vfmt)
>>>>>>>> +             *vfmt = fmt_info;
>>>>>>>> +
>>>>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>>>>> +
>>>>>>>> +     return 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>> +{
>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>> +
>>>>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>> +{
>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>> +     const struct tegra_video_format *info;
>>>>>>>> +     int ret;
>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>>>>> +
>>>>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>>>>> +             return -EBUSY;
>>>>>>>> +
>>>>>>>> +     /* get supported format by try_fmt */
>>>>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>>>>> +     if (ret)
>>>>>>>> +             return ret;
>>>>>>>> +
>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>> +
>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>>>>> +     fmt.pad = 0;
>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>>>>> same here.
>>>>>>>
>>>>> Calling subdev set_fmt here for the same reason as explained above.
>>>>>>>> +
>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>> +     chan->format = *pix;
>>>>>>>> +     chan->fmtinfo = info;
>>>>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>>>>> +                                 pix->height, info->fourcc,
>>>>>>>> +                                 &info->bpp,
>>>>>>>> +                                 pix->bytesperline);
>>>>>>>> +     *pix = chan->format;
>>>>>>>> +
>>>>>>>> +     return 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>>>>> +                                 struct v4l2_input *inp)
>>>>>>>> +{
>>>>>>>> +     /* Currently driver supports internal TPG only */
>>>>>>>> +     if (inp->index != 0)
>>>>>>> just
>>>>>>> if (inp->index)
>>>>>>>
>>>>> Will update in v2
>>>>>>>> +             return -EINVAL;
>>>>>>>> +
>>>>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>>>>> +
>>>>>>>> +     return 0;
>>>>>>>> +}
>>>>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>>>>> +     /* RAW 10 */
>>>>>>>> +     TEGRA_VF_RAW10,
>>>>>>>> +     10,
>>>>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>> +     {2, 1},
>>>>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>>>>> +     "RGRG.. GBGB..",
>>>>>>> It would be more readable to do:
>>>>>>>
>>>>>>> .code = TEGRA_VF_RAW10,
>>>>>>> .width = 10,
>>>>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>
>>>>>>> and so on
>>>>> Will update in v2
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +/*
>>>>>>>> + * Helper functions
>>>>>>>> + */
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * tegra_core_get_default_format - Get default format
>>>>>>>> + *
>>>>>>>> + * Return: pointer to the format where the default format needs
>>>>>>>> + * to be filled in.
>>>>>>>> + */
>>>>>>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>>>>>>> +{
>>>>>>>> +     return &tegra_default_format;
>>>>>>>> +}
>>>>>>> This is only used in tegra-channel.c, why not to declare it there as static?
>>>>>>>
>>>>> Will move all video format retrieval helper functions to corresponding file as static in v2
>>>>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>>>>> +     {1280, 720},
>>>>>>>> +     {1920, 1080},
>>>>>>>> +     {3840, 2160},
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +/*
>>>>>>>> + * V4L2 Subdevice Pad Operations
>>>>>>>> + */
>>>>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>>>>> +{
>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>> +
>>>>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>>>>> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>>>>>>>
>>>>> This is on CSI v4l2 subdevice side during format updates
>>>>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>>>>> I would prefer just:
>>>>>>> *fmt = *csi_chan->ports->format;
>>>>>>>
>>>>>>> I think it is easier to read IMHO.
>>>>>>> same in tegra_csi_set_format().
>>>>>>>
>>>>> Will fix in v2
>>>>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>>>>> +
>>>>>>>> +     return 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>>>>> +{
>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>>>>> +     int i, j;
>>>>>>> unsigned
>>>>>>>
>>>>> Will fix in v2
>>>>>>>> +
>>>>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>>>>>>>> +
>>>>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>>>>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>>>>> +                             if (mfmt->width == sizes->width &&
>>>>>>>> +                                 mfmt->height == sizes->height) {
>>>>>>>> +                                     return;
>>>>>>>> +                             }
>>>>>>>> +                     }
>>>>>>>> +             }
>>>>>>>> +
>>>>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>>>>>>>> +     }
>>>>>>>> +
>>>>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>>>>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 18:29                 ` Helen Koike
@ 2020-01-29 18:46                   ` Sowjanya Komatineni
  0 siblings, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29 18:46 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/29/20 10:29 AM, Helen Koike wrote:
> External email: Use caution opening links or attachments
>
>
> On 1/29/20 3:49 PM, Sowjanya Komatineni wrote:
>> On 1/29/20 2:31 AM, Helen Koike wrote:
>>> External email: Use caution opening links or attachments
>>>
>>>
>>> On 1/29/20 12:11 AM, Sowjanya Komatineni wrote:
>>>> On 1/28/20 5:05 PM, Helen Koike wrote:
>>>>> External email: Use caution opening links or attachments
>>>>>
>>>>>
>>>>> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>>>>>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>>>>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>>>>>> External email: Use caution opening links or attachments
>>>>>>>>
>>>>>>>>
>>>>>>>> Hi Sowjanya,
>>>>>>>>
>>>>>>>> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>>>>>>>>
>>>>>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>>>>>
>>>>>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>>>>>> capture from an external camera sensor connected to CSI or from
>>>>>>>>> built-in test pattern generator.
>>>>>>>>>
>>>>>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>>>>>
>>>>>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>>> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
>>>>>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>>>>>> digraph board {
>>>>>>>            rankdir=TB
>>>>>>>            n00000001 [label="54080000.vi-output-0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>>>>>>            n00000005 [label="54080000.vi-output-1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>>>>>>            n00000009 [label="54080000.vi-output-2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>>>>>>>            n0000000d [label="54080000.vi-output-3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>>>>>>            n00000011 [label="54080000.vi-output-4\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
>>>>>>>            n00000015 [label="54080000.vi-output-5\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
>>>>>>>            n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>            n00000019:port0 -> n00000001
>>>>>>>            n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>            n0000001d:port0 -> n00000005
>>>>>>>            n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>            n00000021:port0 -> n00000009
>>>>>>>            n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>            n00000025:port0 -> n0000000d
>>>>>>>            n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>            n00000029:port0 -> n00000011
>>>>>>>            n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>            n0000002d:port0 -> n00000015
>>>>>>> }
>>>>>>>
>>>>>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>>> new file mode 100644
>>>>>>>>> index 000000000000..84d28e6f4362
>>>>>>>>> --- /dev/null
>>>>>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>>> @@ -0,0 +1,33 @@
>>>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>>>> +/*
>>>>>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>>>>>> + */
>>>>>>>>> +
>>>>>>>>> +#ifndef HOST1X_VIDEO_H
>>>>>>>>> +#define HOST1X_VIDEO_H 1
>>>>>>>>> +
>>>>>>>>> +#include <linux/host1x.h>
>>>>>>>>> +
>>>>>>>>> +#include <media/media-device.h>
>>>>>>>>> +#include <media/media-entity.h>
>>>>>>>>> +#include <media/v4l2-async.h>
>>>>>>>>> +#include <media/v4l2-ctrls.h>
>>>>>>>>> +#include <media/v4l2-device.h>
>>>>>>>>> +#include <media/v4l2-dev.h>
>>>>>>>>> +#include <media/videobuf2-v4l2.h>
>>>>>>>>> +
>>>>>>>>> +#include "tegra-vi.h"
>>>>>>>>> +#include "csi.h"
>>>>>>>>> +
>>>>>>>>> +struct tegra_camera {
>>>>>>>>> +     struct v4l2_device v4l2_dev;
>>>>>>>>> +     struct media_device media_dev;
>>>>>>>>> +     struct device *dev;
>>>>>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>>>>>
>>>>>> Will fix in v2
>>>>>>>>> +     struct tegra_vi *vi;
>>>>>>>>> +     struct tegra_csi_device *csi;
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +
>>>>>>>>> +#define to_tegra_channel(vdev) \
>>>>>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>>>>>> Why not inline instead of define. Inlines has the advantage of checking types.
>>>>>> Will change in v2
>>>>>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>>>>>> +                                   struct v4l2_pix_format *pix,
>>>>>>>>> +                                   const struct tegra_video_format **vfmt)
>>>>>>>>> +{
>>>>>>>>> +     const struct tegra_video_format *fmt_info;
>>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>>>>>> +
>>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>>>>>> +     if (!pad_cfg)
>>>>>>>>> +             return -ENOMEM;
>>>>>>>>> +
>>>>>>>>> +     /*
>>>>>>>>> +      * Retrieve format information and select the default format if the
>>>>>>>>> +      * requested format isn't supported.
>>>>>>>>> +      */
>>>>>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>>>>>>>>> +     if (!fmt_info) {
>>>>>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>>>>>> + pix->pixelformat);
>>>>>>>>> +     }
>>>>>>>>> +
>>>>>>>>> +     /* Change this when start adding interlace format support */
>>>>>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>>>>>> +     fmt.pad = 0;
>>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>>>>>> As fas as I understand, entities formats should be independent, it is up to link_validate
>>>>>>>> to check formats between entities.
>>>>>>>> The capture shouldn't change the format of the subdevice.
>>>>>>>>
>>>>>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source and VI is sink.
>>>>>>
>>>>>> link validation happens only for sink ends of the link.
>>>>> And what is the problem with it being on the sink end?
>>>>> You just need to implement custom link validation in tegra_csi_media_ops that also checks the format
>>>>> between the capture and the subdevice, no? Unless I missunderstood something here (which is quite possible).
>>>>>
>>>>> Examples:
>>>>> drivers/staging/media/rkisp1/rkisp1-capture.c - rkisp1_capture_link_validate()
>>>>> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
>>>>> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - sun6i_video_link_validate()
>>>>>
>>>>> Regards,
>>>>> Helen
>>>>>
>>>> But if we move subdevice side format/size check into its link_validation, any incorrect image size set thru set-fmt-video will be taken and get-fmt-video will also show same as it doesn't validate formats/sizes supported by CSI subdev during this time. link validation happens during pipeline start. So thought to prevent accepting incorrect format/size during set-fmt-video/get-fmt-video.
>>> This is how media API is designed, formats shouldn't propagate between entities, it is up to userspace to configure pads
>>> correctly. And if formats of the pads don't match, stream fails during pipeline start, and userspace receive -EPIPE error.
>>>
>>> According to the docs: https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/dev-subdev.html
>>>
>>> "Formats are not propagated across links, as that would involve propagating them from one sub-device file handle to another. Applications must then take care to configure both ends of every link explicitly with compatible formats. Identical formats on the two ends of a link are guaranteed to be compatible. Drivers are free to accept different formats matching device requirements as being compatible."
>>>
>>> Perhaps you want to add support of this driver in libcamera.org to make it easier to userspace.
>>>
>>> Regards,
>>> Helen
>> I see in doc, Format Negotiation says drivers can propagate formats inside sub-devices. When try/active format is set on pad, corresponding format on other pads of same subdevice can be modified by the driver as long as formats are propagated from Sink pads to source pads.
>>
>> When application configures front-end sink pad format, driver can propagate the format to front-end source pad.
> Yes, the doc says that "Drivers automatically propagate formats **inside** sub-devices", not between subdevices.
>
> So, when a subdevice has a sink pad and a source pad, if user changes the format of the sink pad, the changes
> are indeed propagated to the source pad, but not between different subdevices.
>
>> VI is Sink and CSI is source subdev here for TPG.
> Vi and TPG are different entities, so you shouldn't propagate between them.
>
> Regards,
> Helen
OK, got it. Thanks Helen. Will fix in v2
>> Currently set_fmt/get_fmt from vi channel invokes Source subdevice set_fmt/get_fmt which is CSI in this case of TPG.
>>
>>>> Other than this I don't see any issue moving it to link_validation.
>>>>
>>>>
>>>>>> So with CSI subdev set_fmt sets width/height to default incase if width/height is not from one of the supported sizes.
>>>>>>
>>>>>>>>> +
>>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>>>>>>>>> +                             &pix->bytesperline);
>>>>>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>>>>>> +
>>>>>>>>> +     if (vfmt)
>>>>>>>>> +             *vfmt = fmt_info;
>>>>>>>>> +
>>>>>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>>>>>> +
>>>>>>>>> +     return 0;
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>>> +{
>>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>>> +
>>>>>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>>> +{
>>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>>> +     const struct tegra_video_format *info;
>>>>>>>>> +     int ret;
>>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>>>>>> +
>>>>>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>>>>>> +             return -EBUSY;
>>>>>>>>> +
>>>>>>>>> +     /* get supported format by try_fmt */
>>>>>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>>>>>> +     if (ret)
>>>>>>>>> +             return ret;
>>>>>>>>> +
>>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>>> +
>>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>>>>>> +     fmt.pad = 0;
>>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>>>>>> same here.
>>>>>>>>
>>>>>> Calling subdev set_fmt here for the same reason as explained above.
>>>>>>>>> +
>>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>>> +     chan->format = *pix;
>>>>>>>>> +     chan->fmtinfo = info;
>>>>>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>>>>>> +                                 pix->height, info->fourcc,
>>>>>>>>> +                                 &info->bpp,
>>>>>>>>> +                                 pix->bytesperline);
>>>>>>>>> +     *pix = chan->format;
>>>>>>>>> +
>>>>>>>>> +     return 0;
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>>>>>> +                                 struct v4l2_input *inp)
>>>>>>>>> +{
>>>>>>>>> +     /* Currently driver supports internal TPG only */
>>>>>>>>> +     if (inp->index != 0)
>>>>>>>> just
>>>>>>>> if (inp->index)
>>>>>>>>
>>>>>> Will update in v2
>>>>>>>>> +             return -EINVAL;
>>>>>>>>> +
>>>>>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>>>>>> +
>>>>>>>>> +     return 0;
>>>>>>>>> +}
>>>>>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>>>>>> +     /* RAW 10 */
>>>>>>>>> +     TEGRA_VF_RAW10,
>>>>>>>>> +     10,
>>>>>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>>> +     {2, 1},
>>>>>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>>>>>> +     "RGRG.. GBGB..",
>>>>>>>> It would be more readable to do:
>>>>>>>>
>>>>>>>> .code = TEGRA_VF_RAW10,
>>>>>>>> .width = 10,
>>>>>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>>
>>>>>>>> and so on
>>>>>> Will update in v2
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +/*
>>>>>>>>> + * Helper functions
>>>>>>>>> + */
>>>>>>>>> +
>>>>>>>>> +/**
>>>>>>>>> + * tegra_core_get_default_format - Get default format
>>>>>>>>> + *
>>>>>>>>> + * Return: pointer to the format where the default format needs
>>>>>>>>> + * to be filled in.
>>>>>>>>> + */
>>>>>>>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>>>>>>>> +{
>>>>>>>>> +     return &tegra_default_format;
>>>>>>>>> +}
>>>>>>>> This is only used in tegra-channel.c, why not to declare it there as static?
>>>>>>>>
>>>>>> Will move all video format retrieval helper functions to corresponding file as static in v2
>>>>>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>>>>>> +     {1280, 720},
>>>>>>>>> +     {1920, 1080},
>>>>>>>>> +     {3840, 2160},
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +/*
>>>>>>>>> + * V4L2 Subdevice Pad Operations
>>>>>>>>> + */
>>>>>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>>>>>> +{
>>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>>> +
>>>>>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>>>>>> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>>>>>>>>
>>>>>> This is on CSI v4l2 subdevice side during format updates
>>>>>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>>>>>> I would prefer just:
>>>>>>>> *fmt = *csi_chan->ports->format;
>>>>>>>>
>>>>>>>> I think it is easier to read IMHO.
>>>>>>>> same in tegra_csi_set_format().
>>>>>>>>
>>>>>> Will fix in v2
>>>>>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>>>>>> +
>>>>>>>>> +     return 0;
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>>>>>> +{
>>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>>>>>> +     int i, j;
>>>>>>>> unsigned
>>>>>>>>
>>>>>> Will fix in v2
>>>>>>>>> +
>>>>>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>>>>>>>>> +
>>>>>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>>>>>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>>>>>> +                             if (mfmt->width == sizes->width &&
>>>>>>>>> +                                 mfmt->height == sizes->height) {
>>>>>>>>> +                                     return;
>>>>>>>>> +                             }
>>>>>>>>> +                     }
>>>>>>>>> +             }
>>>>>>>>> +
>>>>>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>>>>>>>>> +     }
>>>>>>>>> +
>>>>>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>>>>>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 18:15                 ` Sowjanya Komatineni
@ 2020-01-29 18:46                   ` Helen Koike
  2020-01-29 22:40                     ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Helen Koike @ 2020-01-29 18:46 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel



On 1/29/20 4:15 PM, Sowjanya Komatineni wrote:
> 
> On 1/29/20 9:49 AM, Sowjanya Komatineni wrote:
>>
>> On 1/29/20 2:31 AM, Helen Koike wrote:
>>> External email: Use caution opening links or attachments
>>>
>>>
>>> On 1/29/20 12:11 AM, Sowjanya Komatineni wrote:
>>>> On 1/28/20 5:05 PM, Helen Koike wrote:
>>>>> External email: Use caution opening links or attachments
>>>>>
>>>>>
>>>>> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>>>>>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>>>>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>>>>>> External email: Use caution opening links or attachments
>>>>>>>>
>>>>>>>>
>>>>>>>> Hi Sowjanya,
>>>>>>>>
>>>>>>>> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>>>>>>>>
>>>>>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>>>>>
>>>>>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>>>>>> capture from an external camera sensor connected to CSI or from
>>>>>>>>> built-in test pattern generator.
>>>>>>>>>
>>>>>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>>>>>
>>>>>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>>> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
>>>>>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>>>>>> digraph board {
>>>>>>>           rankdir=TB
>>>>>>>           n00000001 [label="54080000.vi-output-0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>>>>>>           n00000005 [label="54080000.vi-output-1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>>>>>>           n00000009 [label="54080000.vi-output-2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>>>>>>>           n0000000d [label="54080000.vi-output-3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>>>>>>           n00000011 [label="54080000.vi-output-4\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
>>>>>>>           n00000015 [label="54080000.vi-output-5\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
>>>>>>>           n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>           n00000019:port0 -> n00000001
>>>>>>>           n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>           n0000001d:port0 -> n00000005
>>>>>>>           n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>           n00000021:port0 -> n00000009
>>>>>>>           n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>           n00000025:port0 -> n0000000d
>>>>>>>           n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>           n00000029:port0 -> n00000011
>>>>>>>           n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>           n0000002d:port0 -> n00000015
>>>>>>> }
>>>>>>>
>>>>>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>>> new file mode 100644
>>>>>>>>> index 000000000000..84d28e6f4362
>>>>>>>>> --- /dev/null
>>>>>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>>> @@ -0,0 +1,33 @@
>>>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>>>> +/*
>>>>>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>>>>>> + */
>>>>>>>>> +
>>>>>>>>> +#ifndef HOST1X_VIDEO_H
>>>>>>>>> +#define HOST1X_VIDEO_H 1
>>>>>>>>> +
>>>>>>>>> +#include <linux/host1x.h>
>>>>>>>>> +
>>>>>>>>> +#include <media/media-device.h>
>>>>>>>>> +#include <media/media-entity.h>
>>>>>>>>> +#include <media/v4l2-async.h>
>>>>>>>>> +#include <media/v4l2-ctrls.h>
>>>>>>>>> +#include <media/v4l2-device.h>
>>>>>>>>> +#include <media/v4l2-dev.h>
>>>>>>>>> +#include <media/videobuf2-v4l2.h>
>>>>>>>>> +
>>>>>>>>> +#include "tegra-vi.h"
>>>>>>>>> +#include "csi.h"
>>>>>>>>> +
>>>>>>>>> +struct tegra_camera {
>>>>>>>>> +     struct v4l2_device v4l2_dev;
>>>>>>>>> +     struct media_device media_dev;
>>>>>>>>> +     struct device *dev;
>>>>>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>>>>>
>>>>>> Will fix in v2
>>>>>>>>> +     struct tegra_vi *vi;
>>>>>>>>> +     struct tegra_csi_device *csi;
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +
>>>>>>>>> +#define to_tegra_channel(vdev) \
>>>>>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>>>>>> Why not inline instead of define. Inlines has the advantage of checking types.
>>>>>> Will change in v2
>>>>>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>>>>>> +                                   struct v4l2_pix_format *pix,
>>>>>>>>> +                                   const struct tegra_video_format **vfmt)
>>>>>>>>> +{
>>>>>>>>> +     const struct tegra_video_format *fmt_info;
>>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>>>>>> +
>>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>>>>>> +     if (!pad_cfg)
>>>>>>>>> +             return -ENOMEM;
>>>>>>>>> +
>>>>>>>>> +     /*
>>>>>>>>> +      * Retrieve format information and select the default format if the
>>>>>>>>> +      * requested format isn't supported.
>>>>>>>>> +      */
>>>>>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>>>>>>>>> +     if (!fmt_info) {
>>>>>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>>>>>> + pix->pixelformat);
>>>>>>>>> +     }
>>>>>>>>> +
>>>>>>>>> +     /* Change this when start adding interlace format support */
>>>>>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>>>>>> +     fmt.pad = 0;
>>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>>>>>> As fas as I understand, entities formats should be independent, it is up to link_validate
>>>>>>>> to check formats between entities.
>>>>>>>> The capture shouldn't change the format of the subdevice.
>>>>>>>>
>>>>>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source and VI is sink.
>>>>>>
>>>>>> link validation happens only for sink ends of the link.
>>>>> And what is the problem with it being on the sink end?
>>>>> You just need to implement custom link validation in tegra_csi_media_ops that also checks the format
>>>>> between the capture and the subdevice, no? Unless I missunderstood something here (which is quite possible).
>>>>>
>>>>> Examples:
>>>>> drivers/staging/media/rkisp1/rkisp1-capture.c - rkisp1_capture_link_validate()
>>>>> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
>>>>> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - sun6i_video_link_validate()
>>>>>
>>>>> Regards,
>>>>> Helen
>>>>>
>>>> But if we move subdevice side format/size check into its link_validation, any incorrect image size set thru set-fmt-video will be taken and get-fmt-video will also show same as it doesn't validate formats/sizes supported by CSI subdev during this time. link validation happens during pipeline start. So thought to prevent accepting incorrect format/size during set-fmt-video/get-fmt-video.
>>> This is how media API is designed, formats shouldn't propagate between entities, it is up to userspace to configure pads
>>> correctly. And if formats of the pads don't match, stream fails during pipeline start, and userspace receive -EPIPE error.
>>>
>>> According to the docs: https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/dev-subdev.html
>>>
>>> "Formats are not propagated across links, as that would involve propagating them from one sub-device file handle to another. Applications must then take care to configure both ends of every link explicitly with compatible formats. Identical formats on the two ends of a link are guaranteed to be compatible. Drivers are free to accept different formats matching device requirements as being compatible."
>>>
>>> Perhaps you want to add support of this driver in libcamera.org to make it easier to userspace.
>>>
>>> Regards,
>>> Helen
>>
>> I see in doc, Format Negotiation says drivers can propagate formats inside sub-devices. When try/active format is set on pad, corresponding format on other pads of same subdevice can be modified by the driver as long as formats are propagated from Sink pads to source pads.
>>
>> When application configures front-end sink pad format, driver can propagate the format to front-end source pad.
>>
>> VI is Sink and CSI is source subdev here for TPG.
>>
>> Currently set_fmt/get_fmt from vi channel invokes Source subdevice set_fmt/get_fmt which is CSI in this case of TPG.
>>
> Also regarding link_validation, it seems like its called for every link in pipeline where both end of links are v4l2 subdevices.

This is not correct.

See https://git.linuxtv.org/media_tree.git/tree/drivers/media/mc/mc-entity.c#n474

The .link_validate() callback is called for all links without making a distinction if it is a subdevice or a video device.

> 
> Driver should take care of format validation between sub-device and video nodes.

This is true, in the sense that the default helper v4l2_subdev_link_validate() shouldn't be used, because the default helper
only validates between subdevices, driver should implement a custom function to plug in the .link_validate() callback inside
struct media_entity_operations for video nodes.

> 
> This driver TPG is b/w Tegra CSI (subdevice) and VI (video entity).
> 
> So I don't think we can use link_validate for format validation/negotiation b/w video entity and subdevice.

Yes you can, and the drivers I pointed before do this:

vimc-capture.c - https://git.linuxtv.org/media_tree.git/tree/drivers/media/platform/vimc/vimc-capture.c#n325
rkisp1-capture.c - https://git.linuxtv.org/media_tree.git/tree/drivers/staging/media/rkisp1/rkisp1-capture.c#n1292
ipu3-cio2.c - https://git.linuxtv.org/media_tree.git/tree/drivers/media/pci/intel/ipu3/ipu3-cio2.c#n1544
sun6i_video.c - https://git.linuxtv.org/media_tree.git/tree/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c#n592

Those are video nodes who implement custom .link_validate() callbacks, to validate a link between the video node and a subdevice.

Regards,
Helen

> 
> Currently driver follows propagating format sink pad (VI) to source pad and on CSI source subdev we update format to default if format size doesn't match one of the TPG format sizes.
> 
> Please let me know if I am missing anything to understand your feedback.
> 
> 
>>>> Other than this I don't see any issue moving it to link_validation.
>>>>
>>>>
>>>>>> So with CSI subdev set_fmt sets width/height to default incase if width/height is not from one of the supported sizes.
>>>>>>
>>>>>>>>> +
>>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>>>>>>>>> + &pix->bytesperline);
>>>>>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>>>>>> +
>>>>>>>>> +     if (vfmt)
>>>>>>>>> +             *vfmt = fmt_info;
>>>>>>>>> +
>>>>>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>>>>>> +
>>>>>>>>> +     return 0;
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>>> +{
>>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>>> +
>>>>>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>>> +{
>>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>>> +     const struct tegra_video_format *info;
>>>>>>>>> +     int ret;
>>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>>>>>> +
>>>>>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>>>>>> +             return -EBUSY;
>>>>>>>>> +
>>>>>>>>> +     /* get supported format by try_fmt */
>>>>>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>>>>>> +     if (ret)
>>>>>>>>> +             return ret;
>>>>>>>>> +
>>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>>> +
>>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>>>>>> +     fmt.pad = 0;
>>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>>>>>> same here.
>>>>>>>>
>>>>>> Calling subdev set_fmt here for the same reason as explained above.
>>>>>>>>> +
>>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>>> +     chan->format = *pix;
>>>>>>>>> +     chan->fmtinfo = info;
>>>>>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>>>>>> +                                 pix->height, info->fourcc,
>>>>>>>>> +                                 &info->bpp,
>>>>>>>>> + pix->bytesperline);
>>>>>>>>> +     *pix = chan->format;
>>>>>>>>> +
>>>>>>>>> +     return 0;
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>>>>>> +                                 struct v4l2_input *inp)
>>>>>>>>> +{
>>>>>>>>> +     /* Currently driver supports internal TPG only */
>>>>>>>>> +     if (inp->index != 0)
>>>>>>>> just
>>>>>>>> if (inp->index)
>>>>>>>>
>>>>>> Will update in v2
>>>>>>>>> +             return -EINVAL;
>>>>>>>>> +
>>>>>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>>>>>> +
>>>>>>>>> +     return 0;
>>>>>>>>> +}
>>>>>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>>>>>> +     /* RAW 10 */
>>>>>>>>> +     TEGRA_VF_RAW10,
>>>>>>>>> +     10,
>>>>>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>>> +     {2, 1},
>>>>>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>>>>>> +     "RGRG.. GBGB..",
>>>>>>>> It would be more readable to do:
>>>>>>>>
>>>>>>>> .code = TEGRA_VF_RAW10,
>>>>>>>> .width = 10,
>>>>>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>>
>>>>>>>> and so on
>>>>>> Will update in v2
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +/*
>>>>>>>>> + * Helper functions
>>>>>>>>> + */
>>>>>>>>> +
>>>>>>>>> +/**
>>>>>>>>> + * tegra_core_get_default_format - Get default format
>>>>>>>>> + *
>>>>>>>>> + * Return: pointer to the format where the default format needs
>>>>>>>>> + * to be filled in.
>>>>>>>>> + */
>>>>>>>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>>>>>>>> +{
>>>>>>>>> +     return &tegra_default_format;
>>>>>>>>> +}
>>>>>>>> This is only used in tegra-channel.c, why not to declare it there as static?
>>>>>>>>
>>>>>> Will move all video format retrieval helper functions to corresponding file as static in v2
>>>>>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>>>>>> +     {1280, 720},
>>>>>>>>> +     {1920, 1080},
>>>>>>>>> +     {3840, 2160},
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +/*
>>>>>>>>> + * V4L2 Subdevice Pad Operations
>>>>>>>>> + */
>>>>>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>>>>>> +{
>>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>>> +
>>>>>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>>>>>> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>>>>>>>>
>>>>>> This is on CSI v4l2 subdevice side during format updates
>>>>>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>>>>>> I would prefer just:
>>>>>>>> *fmt = *csi_chan->ports->format;
>>>>>>>>
>>>>>>>> I think it is easier to read IMHO.
>>>>>>>> same in tegra_csi_set_format().
>>>>>>>>
>>>>>> Will fix in v2
>>>>>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>>>>>> +
>>>>>>>>> +     return 0;
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>>>>>> +{
>>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>>>>>> +     int i, j;
>>>>>>>> unsigned
>>>>>>>>
>>>>>> Will fix in v2
>>>>>>>>> +
>>>>>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>>>>>>>>> +
>>>>>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>>>>>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>>>>>> +                             if (mfmt->width == sizes->width &&
>>>>>>>>> +                                 mfmt->height == sizes->height) {
>>>>>>>>> +                                     return;
>>>>>>>>> +                             }
>>>>>>>>> +                     }
>>>>>>>>> +             }
>>>>>>>>> +
>>>>>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>>>>>>>>> +     }
>>>>>>>>> +
>>>>>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>>>>>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 18:46                   ` Helen Koike
@ 2020-01-29 22:40                     ` Sowjanya Komatineni
  0 siblings, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-29 22:40 UTC (permalink / raw)
  To: Helen Koike, thierry.reding, jonathanh, frankc, hverkuil
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 1/29/20 10:46 AM, Helen Koike wrote:
> External email: Use caution opening links or attachments
>
>
> On 1/29/20 4:15 PM, Sowjanya Komatineni wrote:
>> On 1/29/20 9:49 AM, Sowjanya Komatineni wrote:
>>> On 1/29/20 2:31 AM, Helen Koike wrote:
>>>> External email: Use caution opening links or attachments
>>>>
>>>>
>>>> On 1/29/20 12:11 AM, Sowjanya Komatineni wrote:
>>>>> On 1/28/20 5:05 PM, Helen Koike wrote:
>>>>>> External email: Use caution opening links or attachments
>>>>>>
>>>>>>
>>>>>> On 1/28/20 10:49 PM, Sowjanya Komatineni wrote:
>>>>>>> On 1/28/20 2:13 PM, Sowjanya Komatineni wrote:
>>>>>>>> On 1/28/20 1:45 PM, Helen Koike wrote:
>>>>>>>>> External email: Use caution opening links or attachments
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Hi Sowjanya,
>>>>>>>>>
>>>>>>>>> I just took a really quick look, I didn't check the driver in deep, so just some small comments below.
>>>>>>>>>
>>>>>>>>> On 1/28/20 4:23 PM, Sowjanya Komatineni wrote:
>>>>>>>>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>>>>>>>>> which can support up to 6 MIPI CSI camera sensors.
>>>>>>>>>>
>>>>>>>>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>>>>>>>>> capture from an external camera sensor connected to CSI or from
>>>>>>>>>> built-in test pattern generator.
>>>>>>>>>>
>>>>>>>>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>>>>>>>>
>>>>>>>>>> This patch adds a V4L2 media controller and capture driver support
>>>>>>>>>> for Tegra210 built-in CSI to VI test pattern generator.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>>>> Could you send us the output of media-ctl --print-dot ? So we can view the media topology easily?
>>>>>>>> root@tegra-ubuntu:/home/ubuntu# ./media-ctl --print-dot
>>>>>>>> digraph board {
>>>>>>>>            rankdir=TB
>>>>>>>>            n00000001 [label="54080000.vi-output-0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
>>>>>>>>            n00000005 [label="54080000.vi-output-1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>>>>>>>>            n00000009 [label="54080000.vi-output-2\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>>>>>>>>            n0000000d [label="54080000.vi-output-3\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>>>>>>>            n00000011 [label="54080000.vi-output-4\n/dev/video4", shape=box, style=filled, fillcolor=yellow]
>>>>>>>>            n00000015 [label="54080000.vi-output-5\n/dev/video5", shape=box, style=filled, fillcolor=yellow]
>>>>>>>>            n00000019 [label="{{} | tpg-0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>>            n00000019:port0 -> n00000001
>>>>>>>>            n0000001d [label="{{} | tpg-1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>>            n0000001d:port0 -> n00000005
>>>>>>>>            n00000021 [label="{{} | tpg-2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>>            n00000021:port0 -> n00000009
>>>>>>>>            n00000025 [label="{{} | tpg-3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>>            n00000025:port0 -> n0000000d
>>>>>>>>            n00000029 [label="{{} | tpg-4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>>            n00000029:port0 -> n00000011
>>>>>>>>            n0000002d [label="{{} | tpg-5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>>>>>>>>            n0000002d:port0 -> n00000015
>>>>>>>> }
>>>>>>>>
>>>>>>>>>> --- diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>>>> new file mode 100644
>>>>>>>>>> index 000000000000..84d28e6f4362
>>>>>>>>>> --- /dev/null
>>>>>>>>>> +++ b/drivers/staging/media/tegra/host1x-video.h
>>>>>>>>>> @@ -0,0 +1,33 @@
>>>>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>>>>> +/*
>>>>>>>>>> + * Copyright (C) 2020 NVIDIA CORPORATION.  All rights reserved.
>>>>>>>>>> + */
>>>>>>>>>> +
>>>>>>>>>> +#ifndef HOST1X_VIDEO_H
>>>>>>>>>> +#define HOST1X_VIDEO_H 1
>>>>>>>>>> +
>>>>>>>>>> +#include <linux/host1x.h>
>>>>>>>>>> +
>>>>>>>>>> +#include <media/media-device.h>
>>>>>>>>>> +#include <media/media-entity.h>
>>>>>>>>>> +#include <media/v4l2-async.h>
>>>>>>>>>> +#include <media/v4l2-ctrls.h>
>>>>>>>>>> +#include <media/v4l2-device.h>
>>>>>>>>>> +#include <media/v4l2-dev.h>
>>>>>>>>>> +#include <media/videobuf2-v4l2.h>
>>>>>>>>>> +
>>>>>>>>>> +#include "tegra-vi.h"
>>>>>>>>>> +#include "csi.h"
>>>>>>>>>> +
>>>>>>>>>> +struct tegra_camera {
>>>>>>>>>> +     struct v4l2_device v4l2_dev;
>>>>>>>>>> +     struct media_device media_dev;
>>>>>>>>>> +     struct device *dev;
>>>>>>>>> You can use cam->media_dev.dev instead of having this pointer.
>>>>>>>>>
>>>>>>> Will fix in v2
>>>>>>>>>> +     struct tegra_vi *vi;
>>>>>>>>>> +     struct tegra_csi_device *csi;
>>>>>>>>>> +};
>>>>>>>>>> +
>>>>>>>>>> +
>>>>>>>>>> +#define to_tegra_channel(vdev) \
>>>>>>>>>> +     container_of(vdev, struct tegra_channel, video)
>>>>>>>>> Why not inline instead of define. Inlines has the advantage of checking types.
>>>>>>> Will change in v2
>>>>>>>>>> +static int __tegra_channel_try_format(struct tegra_channel *chan,
>>>>>>>>>> +                                   struct v4l2_pix_format *pix,
>>>>>>>>>> +                                   const struct tegra_video_format **vfmt)
>>>>>>>>>> +{
>>>>>>>>>> +     const struct tegra_video_format *fmt_info;
>>>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>>>> +     struct v4l2_subdev_pad_config *pad_cfg;
>>>>>>>>>> +
>>>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>>>> +     pad_cfg = v4l2_subdev_alloc_pad_config(subdev);
>>>>>>>>>> +     if (!pad_cfg)
>>>>>>>>>> +             return -ENOMEM;
>>>>>>>>>> +
>>>>>>>>>> +     /*
>>>>>>>>>> +      * Retrieve format information and select the default format if the
>>>>>>>>>> +      * requested format isn't supported.
>>>>>>>>>> +      */
>>>>>>>>>> +     fmt_info = tegra_core_get_format_by_fourcc(chan, pix->pixelformat);
>>>>>>>>>> +     if (!fmt_info) {
>>>>>>>>>> +             pix->pixelformat = chan->format.pixelformat;
>>>>>>>>>> +             pix->colorspace = chan->format.colorspace;
>>>>>>>>>> +             fmt_info = tegra_core_get_format_by_fourcc(chan,
>>>>>>>>>> + pix->pixelformat);
>>>>>>>>>> +     }
>>>>>>>>>> +
>>>>>>>>>> +     /* Change this when start adding interlace format support */
>>>>>>>>>> +     pix->field = V4L2_FIELD_NONE;
>>>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_TRY;
>>>>>>>>>> +     fmt.pad = 0;
>>>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, fmt_info->code);
>>>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
>>>>>>>>> As fas as I understand, entities formats should be independent, it is up to link_validate
>>>>>>>>> to check formats between entities.
>>>>>>>>> The capture shouldn't change the format of the subdevice.
>>>>>>>>>
>>>>>>> Tegra Built-in TPG on CSI accepts specific TPG sizes and CSI is source and VI is sink.
>>>>>>>
>>>>>>> link validation happens only for sink ends of the link.
>>>>>> And what is the problem with it being on the sink end?
>>>>>> You just need to implement custom link validation in tegra_csi_media_ops that also checks the format
>>>>>> between the capture and the subdevice, no? Unless I missunderstood something here (which is quite possible).
>>>>>>
>>>>>> Examples:
>>>>>> drivers/staging/media/rkisp1/rkisp1-capture.c - rkisp1_capture_link_validate()
>>>>>> drivers/media/pci/intel/ipu3/ipu3-cio2.c - cio2_video_link_validate()
>>>>>> drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c - sun6i_video_link_validate()
>>>>>>
>>>>>> Regards,
>>>>>> Helen
>>>>>>
>>>>> But if we move subdevice side format/size check into its link_validation, any incorrect image size set thru set-fmt-video will be taken and get-fmt-video will also show same as it doesn't validate formats/sizes supported by CSI subdev during this time. link validation happens during pipeline start. So thought to prevent accepting incorrect format/size during set-fmt-video/get-fmt-video.
>>>> This is how media API is designed, formats shouldn't propagate between entities, it is up to userspace to configure pads
>>>> correctly. And if formats of the pads don't match, stream fails during pipeline start, and userspace receive -EPIPE error.
>>>>
>>>> According to the docs: https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/dev-subdev.html
>>>>
>>>> "Formats are not propagated across links, as that would involve propagating them from one sub-device file handle to another. Applications must then take care to configure both ends of every link explicitly with compatible formats. Identical formats on the two ends of a link are guaranteed to be compatible. Drivers are free to accept different formats matching device requirements as being compatible."
>>>>
>>>> Perhaps you want to add support of this driver in libcamera.org to make it easier to userspace.
>>>>
>>>> Regards,
>>>> Helen
>>> I see in doc, Format Negotiation says drivers can propagate formats inside sub-devices. When try/active format is set on pad, corresponding format on other pads of same subdevice can be modified by the driver as long as formats are propagated from Sink pads to source pads.
>>>
>>> When application configures front-end sink pad format, driver can propagate the format to front-end source pad.
>>>
>>> VI is Sink and CSI is source subdev here for TPG.
>>>
>>> Currently set_fmt/get_fmt from vi channel invokes Source subdevice set_fmt/get_fmt which is CSI in this case of TPG.
>>>
>> Also regarding link_validation, it seems like its called for every link in pipeline where both end of links are v4l2 subdevices.
> This is not correct.
>
> See https://git.linuxtv.org/media_tree.git/tree/drivers/media/mc/mc-entity.c#n474
>
> The .link_validate() callback is called for all links without making a distinction if it is a subdevice or a video device.
>
>> Driver should take care of format validation between sub-device and video nodes.
> This is true, in the sense that the default helper v4l2_subdev_link_validate() shouldn't be used, because the default helper
> only validates between subdevices, driver should implement a custom function to plug in the .link_validate() callback inside
> struct media_entity_operations for video nodes.
>
>> This driver TPG is b/w Tegra CSI (subdevice) and VI (video entity).
>>
>> So I don't think we can use link_validate for format validation/negotiation b/w video entity and subdevice.
> Yes you can, and the drivers I pointed before do this:
>
> vimc-capture.c - https://git.linuxtv.org/media_tree.git/tree/drivers/media/platform/vimc/vimc-capture.c#n325
> rkisp1-capture.c - https://git.linuxtv.org/media_tree.git/tree/drivers/staging/media/rkisp1/rkisp1-capture.c#n1292
> ipu3-cio2.c - https://git.linuxtv.org/media_tree.git/tree/drivers/media/pci/intel/ipu3/ipu3-cio2.c#n1544
> sun6i_video.c - https://git.linuxtv.org/media_tree.git/tree/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c#n592
>
> Those are video nodes who implement custom .link_validate() callbacks, to validate a link between the video node and a subdevice.
>
> Regards,
> Helen

Will update to do format checks in link_validate.

Currently I am not creating subdev nodes for TPG as subdevice formats 
are invoked during channel format updates.

Will remove subdevice fmt calls from channel format callback 
implementations and will create subdev nodes for TPG to allow subdev 
set_fmt and get_fmt from user space.

>> Currently driver follows propagating format sink pad (VI) to source pad and on CSI source subdev we update format to default if format size doesn't match one of the TPG format sizes.
>>
>> Please let me know if I am missing anything to understand your feedback.
>>
>>
>>>>> Other than this I don't see any issue moving it to link_validation.
>>>>>
>>>>>
>>>>>>> So with CSI subdev set_fmt sets width/height to default incase if width/height is not from one of the supported sizes.
>>>>>>>
>>>>>>>>>> +
>>>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>>>> +     tegra_channel_fmt_align(chan, &fmt_info->bpp, &pix->width, &pix->height,
>>>>>>>>>> + &pix->bytesperline);
>>>>>>>>>> +     pix->sizeimage = pix->bytesperline * pix->height;
>>>>>>>>>> +
>>>>>>>>>> +     if (vfmt)
>>>>>>>>>> +             *vfmt = fmt_info;
>>>>>>>>>> +
>>>>>>>>>> +     v4l2_subdev_free_pad_config(pad_cfg);
>>>>>>>>>> +
>>>>>>>>>> +     return 0;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int tegra_channel_try_format(struct file *file, void *fh,
>>>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>>>> +{
>>>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>>>> +
>>>>>>>>>> +     return __tegra_channel_try_format(chan, &format->fmt.pix, NULL);
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int tegra_channel_set_format(struct file *file, void *fh,
>>>>>>>>>> +                                 struct v4l2_format *format)
>>>>>>>>>> +{
>>>>>>>>>> +     struct v4l2_fh *vfh = file->private_data;
>>>>>>>>>> +     struct tegra_channel *chan = to_tegra_channel(vfh->vdev);
>>>>>>>>>> +     const struct tegra_video_format *info;
>>>>>>>>>> +     int ret;
>>>>>>>>>> +     struct v4l2_subdev_format fmt;
>>>>>>>>>> +     struct v4l2_subdev *subdev;
>>>>>>>>>> +     struct v4l2_pix_format *pix = &format->fmt.pix;
>>>>>>>>>> +
>>>>>>>>>> +     if (vb2_is_busy(&chan->queue))
>>>>>>>>>> +             return -EBUSY;
>>>>>>>>>> +
>>>>>>>>>> +     /* get supported format by try_fmt */
>>>>>>>>>> +     ret = __tegra_channel_try_format(chan, pix, &info);
>>>>>>>>>> +     if (ret)
>>>>>>>>>> +             return ret;
>>>>>>>>>> +
>>>>>>>>>> +     subdev = tegra_channel_get_remote_subdev(chan);
>>>>>>>>>> +
>>>>>>>>>> +     fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>>>>>>>>> +     fmt.pad = 0;
>>>>>>>>>> +     v4l2_fill_mbus_format(&fmt.format, pix, info->code);
>>>>>>>>>> +     v4l2_subdev_call(subdev, pad, set_fmt, NULL, &fmt);
>>>>>>>>> same here.
>>>>>>>>>
>>>>>>> Calling subdev set_fmt here for the same reason as explained above.
>>>>>>>>>> +
>>>>>>>>>> +     v4l2_fill_pix_format(pix, &fmt.format);
>>>>>>>>>> +     chan->format = *pix;
>>>>>>>>>> +     chan->fmtinfo = info;
>>>>>>>>>> +     tegra_channel_update_format(chan, pix->width,
>>>>>>>>>> +                                 pix->height, info->fourcc,
>>>>>>>>>> +                                 &info->bpp,
>>>>>>>>>> + pix->bytesperline);
>>>>>>>>>> +     *pix = chan->format;
>>>>>>>>>> +
>>>>>>>>>> +     return 0;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static int tegra_channel_enum_input(struct file *file, void *fh,
>>>>>>>>>> +                                 struct v4l2_input *inp)
>>>>>>>>>> +{
>>>>>>>>>> +     /* Currently driver supports internal TPG only */
>>>>>>>>>> +     if (inp->index != 0)
>>>>>>>>> just
>>>>>>>>> if (inp->index)
>>>>>>>>>
>>>>>>> Will update in v2
>>>>>>>>>> +             return -EINVAL;
>>>>>>>>>> +
>>>>>>>>>> +     inp->type = V4L2_INPUT_TYPE_CAMERA;
>>>>>>>>>> +     strscpy(inp->name, "Tegra TPG", sizeof(inp->name));
>>>>>>>>>> +
>>>>>>>>>> +     return 0;
>>>>>>>>>> +}
>>>>>>>>>> +static const struct tegra_video_format tegra_default_format = {
>>>>>>>>>> +     /* RAW 10 */
>>>>>>>>>> +     TEGRA_VF_RAW10,
>>>>>>>>>> +     10,
>>>>>>>>>> +     MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>>>> +     {2, 1},
>>>>>>>>>> +     TEGRA_IMAGE_FORMAT_DEF,
>>>>>>>>>> +     TEGRA_IMAGE_DT_RAW10,
>>>>>>>>>> +     V4L2_PIX_FMT_SRGGB10,
>>>>>>>>>> +     "RGRG.. GBGB..",
>>>>>>>>> It would be more readable to do:
>>>>>>>>>
>>>>>>>>> .code = TEGRA_VF_RAW10,
>>>>>>>>> .width = 10,
>>>>>>>>> .code = MEDIA_BUS_FMT_SRGGB10_1X10,
>>>>>>>>>
>>>>>>>>> and so on
>>>>>>> Will update in v2
>>>>>>>>>> +};
>>>>>>>>>> +
>>>>>>>>>> +/*
>>>>>>>>>> + * Helper functions
>>>>>>>>>> + */
>>>>>>>>>> +
>>>>>>>>>> +/**
>>>>>>>>>> + * tegra_core_get_default_format - Get default format
>>>>>>>>>> + *
>>>>>>>>>> + * Return: pointer to the format where the default format needs
>>>>>>>>>> + * to be filled in.
>>>>>>>>>> + */
>>>>>>>>>> +const struct tegra_video_format *tegra_core_get_default_format(void)
>>>>>>>>>> +{
>>>>>>>>>> +     return &tegra_default_format;
>>>>>>>>>> +}
>>>>>>>>> This is only used in tegra-channel.c, why not to declare it there as static?
>>>>>>>>>
>>>>>>> Will move all video format retrieval helper functions to corresponding file as static in v2
>>>>>>>>>> + +static struct v4l2_frmsize_discrete tegra_csi_tpg_sizes[] = {
>>>>>>>>>> +     {1280, 720},
>>>>>>>>>> +     {1920, 1080},
>>>>>>>>>> +     {3840, 2160},
>>>>>>>>>> +};
>>>>>>>>>> +
>>>>>>>>>> +/*
>>>>>>>>>> + * V4L2 Subdevice Pad Operations
>>>>>>>>>> + */
>>>>>>>>>> +static int tegra_csi_get_format(struct v4l2_subdev *subdev,
>>>>>>>>>> +                             struct v4l2_subdev_pad_config *cfg,
>>>>>>>>>> +                             struct v4l2_subdev_format *fmt)
>>>>>>>>>> +{
>>>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>>>> +
>>>>>>>>>> +     mutex_lock(&csi_chan->format_lock);
>>>>>>>>> Do you need this lock? I think there is already a serialization in the ioctls in place (to be confirmed).
>>>>>>>>>
>>>>>>> This is on CSI v4l2 subdevice side during format updates
>>>>>>>>>> +     memcpy(fmt, &csi_chan->ports->format,
>>>>>>>>>> +            sizeof(struct v4l2_mbus_framefmt));
>>>>>>>>> I would prefer just:
>>>>>>>>> *fmt = *csi_chan->ports->format;
>>>>>>>>>
>>>>>>>>> I think it is easier to read IMHO.
>>>>>>>>> same in tegra_csi_set_format().
>>>>>>>>>
>>>>>>> Will fix in v2
>>>>>>>>>> + mutex_unlock(&csi_chan->format_lock);
>>>>>>>>>> +
>>>>>>>>>> +     return 0;
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +static void tegra_csi_try_mbus_fmt(struct v4l2_subdev *subdev,
>>>>>>>>>> +                                struct v4l2_mbus_framefmt *mfmt)
>>>>>>>>>> +{
>>>>>>>>>> +     struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
>>>>>>>>>> +     struct tegra_csi_device *csi = csi_chan->csi;
>>>>>>>>>> +     const struct v4l2_frmsize_discrete *sizes;
>>>>>>>>>> +     int i, j;
>>>>>>>>> unsigned
>>>>>>>>>
>>>>>>> Will fix in v2
>>>>>>>>>> +
>>>>>>>>>> +     for (i = 0; i < ARRAY_SIZE(tegra_csi_tpg_fmts); i++) {
>>>>>>>>>> +             struct v4l2_mbus_framefmt *mbus_fmt = &tegra_csi_tpg_fmts[i];
>>>>>>>>>> +
>>>>>>>>>> +             if (mfmt->code == mbus_fmt->code) {
>>>>>>>>>> +                     for (j = 0; j < ARRAY_SIZE(tegra_csi_tpg_sizes); j++) {
>>>>>>>>>> +                             sizes = &tegra_csi_tpg_sizes[j];
>>>>>>>>>> +                             if (mfmt->width == sizes->width &&
>>>>>>>>>> +                                 mfmt->height == sizes->height) {
>>>>>>>>>> +                                     return;
>>>>>>>>>> +                             }
>>>>>>>>>> +                     }
>>>>>>>>>> +             }
>>>>>>>>>> +
>>>>>>>>>> +             dev_info(csi->dev, "using Tegra default RAW10 video format\n");
>>>>>>>>>> +     }
>>>>>>>>>> +
>>>>>>>>>> +     dev_info(csi->dev, "using Tegra default WIDTH X HEIGHT (1920x1080)\n");
>>>>>>>>>> +     memcpy(mfmt, tegra_csi_tpg_fmts, sizeof(struct v4l2_mbus_framefmt));
>>>>>>>>>> +}
>>>>>>>>>> +
>>>>>>>>>> +

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-29 17:23     ` Sowjanya Komatineni
@ 2020-01-30 12:20       ` Thierry Reding
  2020-01-30 17:02         ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Thierry Reding @ 2020-01-30 12:20 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1748 bytes --]

On Wed, Jan 29, 2020 at 09:23:38AM -0800, Sowjanya Komatineni wrote:
> 
> On 1/29/20 3:13 AM, Thierry Reding wrote:
> > On Tue, Jan 28, 2020 at 10:23:20AM -0800, Sowjanya Komatineni wrote:
[...]
> > > diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
[...]
> > > +	media_device_init(&cam->media_dev);
> > > +	ret = media_device_register(&cam->media_dev);
> > > +	if (ret < 0) {
> > > +		dev_err(cam->dev, "failed to register media device: %d\n", ret);
> > > +		return ret;
> > > +	}
> > > +
> > > +	cam->v4l2_dev.mdev = &cam->media_dev;
> > > +	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
> > > +	if (ret < 0) {
> > > +		dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
> > > +		goto register_error;
> > > +	}
> > > +
> > > +	dev_set_drvdata(&dev->dev, cam);
> > > +
> > > +	ret = host1x_device_init(dev);
> > > +	if (ret < 0)
> > > +		goto dev_exit;
> > > +
> > > +	return 0;
> > > +
> > > +dev_exit:
> > > +	host1x_device_exit(dev);
> > There should be no need to call host1x_device_exit() when
> > host1x_device_init() failed because the latter already takes care of
> > undoing whatever it did already.
> > 
> host1x_device_init can fail if any of its client ops init fails.
> 
> So, calling host1x_device_exit here to undo the things done in other
> successful client init ops.

host1x_device_init() already takes care of undoing what it did on
failure. Also, it makes sure to only undo what had already been done,
rather than tear down every client, even if it hadn't been initialized
yet when the failure happened. The latter is what would happen if you
called host1x_device_exit() to cleanup at this point.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-29 16:22     ` Sowjanya Komatineni
@ 2020-01-30 12:36       ` Thierry Reding
  2020-01-30 17:18         ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Thierry Reding @ 2020-01-30 12:36 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 5076 bytes --]

On Wed, Jan 29, 2020 at 08:22:48AM -0800, Sowjanya Komatineni wrote:
> 
> On 1/29/20 1:46 AM, Thierry Reding wrote:
> > On Tue, Jan 28, 2020 at 10:23:21AM -0800, Sowjanya Komatineni wrote:
> > > Tegra210 contains VI controller for video input capture from MIPI
> > > CSI camera sensors and also supports built-in test pattern generator.
> > > 
> > > CSI ports can be one-to-one mapped to VI channels for capturing from
> > > an external sensor or from built-in test pattern generator.
> > > 
> > > This patch adds support for VI and CSI and enables them in Tegra210
> > > device tree.
> > > 
> > > Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> > > ---
> > >   arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  8 +++++++
> > >   arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 +++++++++++++++++++++++++-
> > >   2 files changed, 38 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> > > index b0095072bc28..ec1b3033fa03 100644
> > > --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> > > +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> > > @@ -10,6 +10,14 @@
> > >   			status = "okay";
> > >   		};
> > > +		vi@54080000 {
> > > +			status = "okay";
> > > +		};
> > > +
> > > +		csi@0x54080838 {
> > > +			status = "okay";
> > > +		};
> > > +
> > >   		sor@54580000 {
> > >   			status = "okay";
> > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> > > index 48c63256ba7f..c6107ec03ad1 100644
> > > --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> > > +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> > > @@ -136,9 +136,38 @@
> > >   		vi@54080000 {
> > >   			compatible = "nvidia,tegra210-vi";
> > > -			reg = <0x0 0x54080000 0x0 0x00040000>;
> > > +			reg = <0x0 0x54080000 0x0 0x808>;
> > >   			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> > >   			status = "disabled";
> > > +			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
> > > +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
> > > +
> > > +			clocks = <&tegra_car TEGRA210_CLK_VI>;
> > > +			clock-names = "vi";
> > > +			resets = <&tegra_car 20>;
> > > +			reset-names = "vi";
> > > +		};
> > > +
> > > +		csi@0x54080838 {
> > > +			compatible = "nvidia,tegra210-csi";
> > > +			reg = <0x0 0x54080838 0x0 0x2000>;
> > > +			status = "disabled";
> > > +			assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
> > > +					  <&tegra_car TEGRA210_CLK_CILCD>,
> > > +					  <&tegra_car TEGRA210_CLK_CILE>;
> > > +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
> > > +						 <&tegra_car TEGRA210_CLK_PLL_P>,
> > > +						 <&tegra_car TEGRA210_CLK_PLL_P>;
> > > +			assigned-clock-rates = <102000000>,
> > > +					       <102000000>,
> > > +					       <102000000>;
> > > +
> > > +			clocks = <&tegra_car TEGRA210_CLK_CSI>,
> > > +				 <&tegra_car TEGRA210_CLK_CILAB>,
> > > +				 <&tegra_car TEGRA210_CLK_CILCD>,
> > > +				 <&tegra_car TEGRA210_CLK_CILE>;
> > > +			clock-names = "csi", "cilab", "cilcd", "cile";
> > > +
> > >   		};
> > Can this be a child of the vi node? Looking at the register ranges it
> > seems like these are actually a single IP block. If they have separate
> > blocks with clearly separate functionality, then it makes sense to have
> > CSI be a child node of VI, though it may also be okay to merge both and
> > have a single node with the driver doing all of the differentiation
> > between what's VI and what's CSI.
> > 
> > Looking at later chips, the split between VI and CSI is more explicit,
> > so having the split in DT for Tegra210 may make sense for consistency.
> > 
> > I know we've discussed this before, but for some reason I keep coming
> > back to this. I'll go through the other patches to see if I can get a
> > clearer picture of how this could all work together.
> > 
> > Thierry
> 
> We can keep it separate as we discussed.
> 
> But as Tegra186 onwards, CSI is separate device to be all cosistent I kept
> CSI as separate node for Tegra210 as well.

From our discussion, my understanding was that CSI would be a separate
device, but it would still be a subdevice of VI. The address offset of
the CSI registers not being aligned to a power of two is a strong
indication that this is really all part of the same block.

Looking at this again, I'm having second thoughts about even that
suggestion. It wouldn't be technically wrong to have an additional
subdevice for CSI, but I don't think it's really necessary.

Now, given that the DT part is going to be somewhat crucial because it
will be ABI once merged, I'd like to make sure we're not painting
ourselves into a corner. Could you post a few examples of how this
currently looks? In addition to this TPG-only example, do you have a
variant of what it looks with the current proposal? I can only find an
example of the CSI-as-subdevice-of-VI that we had discussed earlier.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-28 18:23 [RFC PATCH v1 0/5] Add Tegra driver for video capture Sowjanya Komatineni
                   ` (4 preceding siblings ...)
  2020-01-28 18:23 ` [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree Sowjanya Komatineni
@ 2020-01-30 14:41 ` Hans Verkuil
  2020-01-30 15:42   ` Thierry Reding
  2020-01-30 17:20   ` Sowjanya Komatineni
  2020-02-04 12:53 ` Hans Verkuil
  6 siblings, 2 replies; 55+ messages in thread
From: Hans Verkuil @ 2020-01-30 14:41 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Hi Sowjanya,

On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
> This series adds Tegra210 VI and CSI driver for built-in test pattern
> generator (TPG) capture.
> 
> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
> CSI port is one-to-one mapped to VI channel for video capture.
> 
> This series has TPG support only where it creates hard media links
> between CSI subdevice and VI video device without device graphs.
> 
> v4l2-compliance results are available below the patch diff.
> 
> [v0]:	Includes,
> 	- Adds CSI TPG clock to Tegra210 clock driver
> 	- Host1x video driver with VI and CSI clients.
> 	- Support for Tegra210 only.
> 	- VI CSI TPG support with hard media links in driver.
> 	- Video formats supported by Tegra210 VI
> 	- CSI TPG supported video formats

I'm trying to compile this patch series using the media_tree master
branch (https://git.linuxtv.org//media_tree.git), but it fails:

drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_queue_setup’:
drivers/staging/media/tegra/tegra-channel.c:71:15: warning: unused variable ‘count’ [-Wunused-variable]
   71 |  unsigned int count = *nbuffers;
      |               ^~~~~
drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_init’:
drivers/staging/media/tegra/tegra-channel.c:518:55: error: ‘struct host1x_client’ has no member named ‘host’
  518 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
      |                                                       ^
make[4]: *** [scripts/Makefile.build:265: drivers/staging/media/tegra/tegra-channel.o] Error 1
make[4]: *** Waiting for unfinished jobs....
drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_tpg_graph_init’:
drivers/staging/media/tegra/tegra-vi.c:157:55: error: ‘struct host1x_client’ has no member named ‘host’
  157 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
      |                                                       ^
drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_init’:
drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_init’:
drivers/staging/media/tegra/tegra-vi.c:213:51: error: ‘struct host1x_client’ has no member named ‘host’
  213 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
      |                                                   ^~
drivers/staging/media/tegra/tegra-csi.c:259:51: error: ‘struct host1x_client’ has no member named ‘host’
  259 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
      |                                                   ^~
drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_exit’:
drivers/staging/media/tegra/tegra-vi.c:246:51: error: ‘struct host1x_client’ has no member named ‘host’
  246 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
      |                                                   ^~
drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_exit’:
drivers/staging/media/tegra/tegra-csi.c:286:51: error: ‘struct host1x_client’ has no member named ‘host’
  286 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
      |                                                   ^~

And indeed, struct host1x_client as defined in include/linux/host1x.h doesn't
have a 'host' field.

Does this series depend on another patch that's not yet in mainline?

Regards,

	Hans

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 18:23 ` [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210 Sowjanya Komatineni
                     ` (2 preceding siblings ...)
  2020-01-29 14:16   ` Hans Verkuil (hansverk)
@ 2020-01-30 14:45   ` Hans Verkuil
  2020-02-05 19:26   ` Stephen Boyd
  4 siblings, 0 replies; 55+ messages in thread
From: Hans Verkuil @ 2020-01-30 14:45 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
> Tegra210 contains a powerful Video Input (VI) hardware controller
> which can support up to 6 MIPI CSI camera sensors.
> 
> Each Tegra CSI port can be one-to-one mapped to VI channel and can
> capture from an external camera sensor connected to CSI or from
> built-in test pattern generator.
> 
> Tegra210 supports built-in test pattern generator from CSI to VI.
> 
> This patch adds a V4L2 media controller and capture driver support
> for Tegra210 built-in CSI to VI test pattern generator.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  drivers/staging/media/Kconfig               |   2 +
>  drivers/staging/media/Makefile              |   1 +
>  drivers/staging/media/tegra/Kconfig         |  12 +
>  drivers/staging/media/tegra/Makefile        |  11 +
>  drivers/staging/media/tegra/TODO            |  10 +
>  drivers/staging/media/tegra/csi.h           | 111 +++++
>  drivers/staging/media/tegra/csi2_fops.c     | 335 +++++++++++++++
>  drivers/staging/media/tegra/csi2_fops.h     |  15 +
>  drivers/staging/media/tegra/host1x-video.c  | 120 ++++++
>  drivers/staging/media/tegra/host1x-video.h  |  33 ++
>  drivers/staging/media/tegra/mc_common.h     | 131 ++++++
>  drivers/staging/media/tegra/tegra-channel.c | 628 ++++++++++++++++++++++++++++
>  drivers/staging/media/tegra/tegra-core.c    | 111 +++++
>  drivers/staging/media/tegra/tegra-core.h    | 125 ++++++
>  drivers/staging/media/tegra/tegra-csi.c     | 380 +++++++++++++++++
>  drivers/staging/media/tegra/tegra-vi.c      | 351 ++++++++++++++++
>  drivers/staging/media/tegra/tegra-vi.h      | 101 +++++
>  drivers/staging/media/tegra/vi2_fops.c      | 364 ++++++++++++++++
>  drivers/staging/media/tegra/vi2_fops.h      |  15 +
>  drivers/staging/media/tegra/vi2_formats.h   | 119 ++++++
>  drivers/staging/media/tegra/vi2_registers.h | 194 +++++++++

Please add an entry to the MAINTAINERS file for this new driver.

Also, checkpatch.pl --strict complains about the SPDX tag in the headers:

WARNING: Improper SPDX comment style for 'drivers/staging/media/tegra/csi.h', please use '/*' instead
#141: FILE: drivers/staging/media/tegra/csi.h:1:
+// SPDX-License-Identifier: GPL-2.0-only

(same warning for all headers)

Please fix for v2.

Regards,

	Hans

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-30 14:41 ` [RFC PATCH v1 0/5] Add Tegra driver for video capture Hans Verkuil
@ 2020-01-30 15:42   ` Thierry Reding
  2020-01-31 14:29     ` Hans Verkuil
  2020-01-30 17:20   ` Sowjanya Komatineni
  1 sibling, 1 reply; 55+ messages in thread
From: Thierry Reding @ 2020-01-30 15:42 UTC (permalink / raw)
  To: Hans Verkuil
  Cc: Sowjanya Komatineni, jonathanh, frankc, linux-media, devicetree,
	linux-clk, linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3820 bytes --]

On Thu, Jan 30, 2020 at 03:41:50PM +0100, Hans Verkuil wrote:
> Hi Sowjanya,
> 
> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
> > This series adds Tegra210 VI and CSI driver for built-in test pattern
> > generator (TPG) capture.
> > 
> > Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
> > CSI port is one-to-one mapped to VI channel for video capture.
> > 
> > This series has TPG support only where it creates hard media links
> > between CSI subdevice and VI video device without device graphs.
> > 
> > v4l2-compliance results are available below the patch diff.
> > 
> > [v0]:	Includes,
> > 	- Adds CSI TPG clock to Tegra210 clock driver
> > 	- Host1x video driver with VI and CSI clients.
> > 	- Support for Tegra210 only.
> > 	- VI CSI TPG support with hard media links in driver.
> > 	- Video formats supported by Tegra210 VI
> > 	- CSI TPG supported video formats
> 
> I'm trying to compile this patch series using the media_tree master
> branch (https://git.linuxtv.org//media_tree.git), but it fails:
> 
> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_queue_setup’:
> drivers/staging/media/tegra/tegra-channel.c:71:15: warning: unused variable ‘count’ [-Wunused-variable]
>    71 |  unsigned int count = *nbuffers;
>       |               ^~~~~
> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_init’:
> drivers/staging/media/tegra/tegra-channel.c:518:55: error: ‘struct host1x_client’ has no member named ‘host’
>   518 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>       |                                                       ^
> make[4]: *** [scripts/Makefile.build:265: drivers/staging/media/tegra/tegra-channel.o] Error 1
> make[4]: *** Waiting for unfinished jobs....
> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_tpg_graph_init’:
> drivers/staging/media/tegra/tegra-vi.c:157:55: error: ‘struct host1x_client’ has no member named ‘host’
>   157 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>       |                                                       ^
> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_init’:
> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_init’:
> drivers/staging/media/tegra/tegra-vi.c:213:51: error: ‘struct host1x_client’ has no member named ‘host’
>   213 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>       |                                                   ^~
> drivers/staging/media/tegra/tegra-csi.c:259:51: error: ‘struct host1x_client’ has no member named ‘host’
>   259 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>       |                                                   ^~
> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_exit’:
> drivers/staging/media/tegra/tegra-vi.c:246:51: error: ‘struct host1x_client’ has no member named ‘host’
>   246 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>       |                                                   ^~
> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_exit’:
> drivers/staging/media/tegra/tegra-csi.c:286:51: error: ‘struct host1x_client’ has no member named ‘host’
>   286 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>       |                                                   ^~
> 
> And indeed, struct host1x_client as defined in include/linux/host1x.h doesn't
> have a 'host' field.
> 
> Does this series depend on another patch that's not yet in mainline?

Sowjanya's been working on top of linux-next, so, yes, this patch
depends on a change that's been merged into the DRM tree for v5.6-rc1.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-30 12:20       ` Thierry Reding
@ 2020-01-30 17:02         ` Sowjanya Komatineni
  0 siblings, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-30 17:02 UTC (permalink / raw)
  To: Thierry Reding
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel


On 1/30/20 4:20 AM, Thierry Reding wrote:
> On Wed, Jan 29, 2020 at 09:23:38AM -0800, Sowjanya Komatineni wrote:
>> On 1/29/20 3:13 AM, Thierry Reding wrote:
>>> On Tue, Jan 28, 2020 at 10:23:20AM -0800, Sowjanya Komatineni wrote:
> [...]
>>>> diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
> [...]
>>>> +	media_device_init(&cam->media_dev);
>>>> +	ret = media_device_register(&cam->media_dev);
>>>> +	if (ret < 0) {
>>>> +		dev_err(cam->dev, "failed to register media device: %d\n", ret);
>>>> +		return ret;
>>>> +	}
>>>> +
>>>> +	cam->v4l2_dev.mdev = &cam->media_dev;
>>>> +	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
>>>> +	if (ret < 0) {
>>>> +		dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
>>>> +		goto register_error;
>>>> +	}
>>>> +
>>>> +	dev_set_drvdata(&dev->dev, cam);
>>>> +
>>>> +	ret = host1x_device_init(dev);
>>>> +	if (ret < 0)
>>>> +		goto dev_exit;
>>>> +
>>>> +	return 0;
>>>> +
>>>> +dev_exit:
>>>> +	host1x_device_exit(dev);
>>> There should be no need to call host1x_device_exit() when
>>> host1x_device_init() failed because the latter already takes care of
>>> undoing whatever it did already.
>>>
>> host1x_device_init can fail if any of its client ops init fails.
>>
>> So, calling host1x_device_exit here to undo the things done in other
>> successful client init ops.
> host1x_device_init() already takes care of undoing what it did on
> failure. Also, it makes sure to only undo what had already been done,
> rather than tear down every client, even if it hadn't been initialized
> yet when the failure happened. The latter is what would happen if you
> called host1x_device_exit() to cleanup at this point.
>
> Thierry

Sorry, yes I see host1x_device_init calls exit ops on failures .

Will remove it. Thanks Thierry.


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: Re: [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-30 12:36       ` Thierry Reding
@ 2020-01-30 17:18         ` Sowjanya Komatineni
  2020-01-30 17:58           ` Thierry Reding
  0 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-30 17:18 UTC (permalink / raw)
  To: Thierry Reding
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel


On 1/30/20 4:36 AM, Thierry Reding wrote:
> On Wed, Jan 29, 2020 at 08:22:48AM -0800, Sowjanya Komatineni wrote:
>> On 1/29/20 1:46 AM, Thierry Reding wrote:
>>> On Tue, Jan 28, 2020 at 10:23:21AM -0800, Sowjanya Komatineni wrote:
>>>> Tegra210 contains VI controller for video input capture from MIPI
>>>> CSI camera sensors and also supports built-in test pattern generator.
>>>>
>>>> CSI ports can be one-to-one mapped to VI channels for capturing from
>>>> an external sensor or from built-in test pattern generator.
>>>>
>>>> This patch adds support for VI and CSI and enables them in Tegra210
>>>> device tree.
>>>>
>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>> ---
>>>>    arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  8 +++++++
>>>>    arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 +++++++++++++++++++++++++-
>>>>    2 files changed, 38 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>> index b0095072bc28..ec1b3033fa03 100644
>>>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>> @@ -10,6 +10,14 @@
>>>>    			status = "okay";
>>>>    		};
>>>> +		vi@54080000 {
>>>> +			status = "okay";
>>>> +		};
>>>> +
>>>> +		csi@0x54080838 {
>>>> +			status = "okay";
>>>> +		};
>>>> +
>>>>    		sor@54580000 {
>>>>    			status = "okay";
>>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>> index 48c63256ba7f..c6107ec03ad1 100644
>>>> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>> @@ -136,9 +136,38 @@
>>>>    		vi@54080000 {
>>>>    			compatible = "nvidia,tegra210-vi";
>>>> -			reg = <0x0 0x54080000 0x0 0x00040000>;
>>>> +			reg = <0x0 0x54080000 0x0 0x808>;
>>>>    			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>>>>    			status = "disabled";
>>>> +			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
>>>> +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
>>>> +
>>>> +			clocks = <&tegra_car TEGRA210_CLK_VI>;
>>>> +			clock-names = "vi";
>>>> +			resets = <&tegra_car 20>;
>>>> +			reset-names = "vi";
>>>> +		};
>>>> +
>>>> +		csi@0x54080838 {
>>>> +			compatible = "nvidia,tegra210-csi";
>>>> +			reg = <0x0 0x54080838 0x0 0x2000>;
>>>> +			status = "disabled";
>>>> +			assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
>>>> +					  <&tegra_car TEGRA210_CLK_CILCD>,
>>>> +					  <&tegra_car TEGRA210_CLK_CILE>;
>>>> +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
>>>> +						 <&tegra_car TEGRA210_CLK_PLL_P>,
>>>> +						 <&tegra_car TEGRA210_CLK_PLL_P>;
>>>> +			assigned-clock-rates = <102000000>,
>>>> +					       <102000000>,
>>>> +					       <102000000>;
>>>> +
>>>> +			clocks = <&tegra_car TEGRA210_CLK_CSI>,
>>>> +				 <&tegra_car TEGRA210_CLK_CILAB>,
>>>> +				 <&tegra_car TEGRA210_CLK_CILCD>,
>>>> +				 <&tegra_car TEGRA210_CLK_CILE>;
>>>> +			clock-names = "csi", "cilab", "cilcd", "cile";
>>>> +
>>>>    		};
>>> Can this be a child of the vi node? Looking at the register ranges it
>>> seems like these are actually a single IP block. If they have separate
>>> blocks with clearly separate functionality, then it makes sense to have
>>> CSI be a child node of VI, though it may also be okay to merge both and
>>> have a single node with the driver doing all of the differentiation
>>> between what's VI and what's CSI.
>>>
>>> Looking at later chips, the split between VI and CSI is more explicit,
>>> so having the split in DT for Tegra210 may make sense for consistency.
>>>
>>> I know we've discussed this before, but for some reason I keep coming
>>> back to this. I'll go through the other patches to see if I can get a
>>> clearer picture of how this could all work together.
>>>
>>> Thierry
>> We can keep it separate as we discussed.
>>
>> But as Tegra186 onwards, CSI is separate device to be all cosistent I kept
>> CSI as separate node for Tegra210 as well.
>  From our discussion, my understanding was that CSI would be a separate
> device, but it would still be a subdevice of VI. The address offset of
> the CSI registers not being aligned to a power of two is a strong
> indication that this is really all part of the same block.

Yes our earlier discussion is to have CSI as subdevice.

Later looking into T186 and later NVCSI is totally separate so it will 
be separate device and to have driver common moved Tegra210 CSI also as 
separate device instead of having it as subdevice of VI.

Earlier when we discussed at that time I am using TPG also from device 
graphs but not moved to hard media links inside driver for TPG.

For this we need CSI to be available prior to VI. If we add CSI as 
subdevice to VI, CSI will not be available by the time VI init happens.

Currently host1x subdevices listed has CSI before VI and CSI init 
happens earlier so by the time VI init happens CSI is available to do 
media links b/w VI video entity and CSI subdevice entity.

Also having CSI as separate subdevice (not as subdevice to VI) for T210 
will be consistent with T186 and later.

Having CSI as subdevice in DT will be good even when we add sensor support.


>
> Looking at this again, I'm having second thoughts about even that
> suggestion. It wouldn't be technically wrong to have an additional
> subdevice for CSI, but I don't think it's really necessary.
>
> Now, given that the DT part is going to be somewhat crucial because it
> will be ABI once merged, I'd like to make sure we're not painting
> ourselves into a corner. Could you post a few examples of how this
> currently looks? In addition to this TPG-only example, do you have a
> variant of what it looks with the current proposal? I can only find an
> example of the CSI-as-subdevice-of-VI that we had discussed earlier.
>
> Thierry

Here's sample of DT how it looks when we add sensor support

vi@54080000 {
      status = "okay";
      ports {
            #address-cells = <1>;
            #size-cells = <0>;
            imx274_vi_port0: port@0 {
                   reg = <0>;
                   imx274_vi_in0: endpoint {
                         remote-endpoint = <&imx274_csi_out0>;
                   };
            };
     };
};

csi@0x54080838 {
      status = "okay";
      #address-cells = <1>;
      #size-cells = <0>;
      csi_chan0: channel@0 {
              reg = <0>;
              nvidia,mipi-calibrate = <&mipi 0x003>; /* CSI-AB */
              ports {
                     #address-cells = <1>;
                     #size-cells = <0>;
                     csi_chan0_port0: port@0 {
                             reg = <0>;
                             imx274_csi_in0: endpoint@0 {
                                    remote-endpoint = <&imx274_out0>;
                             };
                     };
                     csi_chan0_port1: port@1 {
                             reg = <1>;
                             imx274_csi_out0: endpoint@1 {
                                     remote-endpoint = <&imx274_vi_in0>;
                            };
                     };
             };
     };
};

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-30 14:41 ` [RFC PATCH v1 0/5] Add Tegra driver for video capture Hans Verkuil
  2020-01-30 15:42   ` Thierry Reding
@ 2020-01-30 17:20   ` Sowjanya Komatineni
  1 sibling, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-30 17:20 UTC (permalink / raw)
  To: Hans Verkuil, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

I noticed the warning in queue_setup and will be removed in v2.

But errors are related to not using latest host1x driver. latest host1x 
driver changed parent member to host.

So vi/csi driver also uses new member name host. Probably media_tree 
don't have latest host1x driver


On 1/30/20 6:41 AM, Hans Verkuil wrote:
> External email: Use caution opening links or attachments
>
>
> Hi Sowjanya,
>
> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
>> This series adds Tegra210 VI and CSI driver for built-in test pattern
>> generator (TPG) capture.
>>
>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
>> CSI port is one-to-one mapped to VI channel for video capture.
>>
>> This series has TPG support only where it creates hard media links
>> between CSI subdevice and VI video device without device graphs.
>>
>> v4l2-compliance results are available below the patch diff.
>>
>> [v0]: Includes,
>>        - Adds CSI TPG clock to Tegra210 clock driver
>>        - Host1x video driver with VI and CSI clients.
>>        - Support for Tegra210 only.
>>        - VI CSI TPG support with hard media links in driver.
>>        - Video formats supported by Tegra210 VI
>>        - CSI TPG supported video formats
> I'm trying to compile this patch series using the media_tree master
> branch (https://git.linuxtv.org//media_tree.git), but it fails:
>
> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_queue_setup’:
> drivers/staging/media/tegra/tegra-channel.c:71:15: warning: unused variable ‘count’ [-Wunused-variable]
>     71 |  unsigned int count = *nbuffers;
>        |               ^~~~~
> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_init’:
> drivers/staging/media/tegra/tegra-channel.c:518:55: error: ‘struct host1x_client’ has no member named ‘host’
>    518 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>        |                                                       ^
> make[4]: *** [scripts/Makefile.build:265: drivers/staging/media/tegra/tegra-channel.o] Error 1
> make[4]: *** Waiting for unfinished jobs....
> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_tpg_graph_init’:
> drivers/staging/media/tegra/tegra-vi.c:157:55: error: ‘struct host1x_client’ has no member named ‘host’
>    157 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>        |                                                       ^
> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_init’:
> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_init’:
> drivers/staging/media/tegra/tegra-vi.c:213:51: error: ‘struct host1x_client’ has no member named ‘host’
>    213 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>        |                                                   ^~
> drivers/staging/media/tegra/tegra-csi.c:259:51: error: ‘struct host1x_client’ has no member named ‘host’
>    259 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>        |                                                   ^~
> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_exit’:
> drivers/staging/media/tegra/tegra-vi.c:246:51: error: ‘struct host1x_client’ has no member named ‘host’
>    246 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>        |                                                   ^~
> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_exit’:
> drivers/staging/media/tegra/tegra-csi.c:286:51: error: ‘struct host1x_client’ has no member named ‘host’
>    286 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>        |                                                   ^~
>
> And indeed, struct host1x_client as defined in include/linux/host1x.h doesn't
> have a 'host' field.
>
> Does this series depend on another patch that's not yet in mainline?
>
> Regards,
>
>          Hans

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: Re: [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-30 17:18         ` Sowjanya Komatineni
@ 2020-01-30 17:58           ` Thierry Reding
  2020-01-30 18:58             ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Thierry Reding @ 2020-01-30 17:58 UTC (permalink / raw)
  To: Sowjanya Komatineni
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 7552 bytes --]

On Thu, Jan 30, 2020 at 09:18:50AM -0800, Sowjanya Komatineni wrote:
> 
> On 1/30/20 4:36 AM, Thierry Reding wrote:
> > On Wed, Jan 29, 2020 at 08:22:48AM -0800, Sowjanya Komatineni wrote:
> > > On 1/29/20 1:46 AM, Thierry Reding wrote:
> > > > On Tue, Jan 28, 2020 at 10:23:21AM -0800, Sowjanya Komatineni wrote:
> > > > > Tegra210 contains VI controller for video input capture from MIPI
> > > > > CSI camera sensors and also supports built-in test pattern generator.
> > > > > 
> > > > > CSI ports can be one-to-one mapped to VI channels for capturing from
> > > > > an external sensor or from built-in test pattern generator.
> > > > > 
> > > > > This patch adds support for VI and CSI and enables them in Tegra210
> > > > > device tree.
> > > > > 
> > > > > Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> > > > > ---
> > > > >    arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  8 +++++++
> > > > >    arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 +++++++++++++++++++++++++-
> > > > >    2 files changed, 38 insertions(+), 1 deletion(-)
> > > > > 
> > > > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> > > > > index b0095072bc28..ec1b3033fa03 100644
> > > > > --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> > > > > +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> > > > > @@ -10,6 +10,14 @@
> > > > >    			status = "okay";
> > > > >    		};
> > > > > +		vi@54080000 {
> > > > > +			status = "okay";
> > > > > +		};
> > > > > +
> > > > > +		csi@0x54080838 {
> > > > > +			status = "okay";
> > > > > +		};
> > > > > +
> > > > >    		sor@54580000 {
> > > > >    			status = "okay";
> > > > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> > > > > index 48c63256ba7f..c6107ec03ad1 100644
> > > > > --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> > > > > +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> > > > > @@ -136,9 +136,38 @@
> > > > >    		vi@54080000 {
> > > > >    			compatible = "nvidia,tegra210-vi";
> > > > > -			reg = <0x0 0x54080000 0x0 0x00040000>;
> > > > > +			reg = <0x0 0x54080000 0x0 0x808>;
> > > > >    			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> > > > >    			status = "disabled";
> > > > > +			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
> > > > > +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
> > > > > +
> > > > > +			clocks = <&tegra_car TEGRA210_CLK_VI>;
> > > > > +			clock-names = "vi";
> > > > > +			resets = <&tegra_car 20>;
> > > > > +			reset-names = "vi";
> > > > > +		};
> > > > > +
> > > > > +		csi@0x54080838 {
> > > > > +			compatible = "nvidia,tegra210-csi";
> > > > > +			reg = <0x0 0x54080838 0x0 0x2000>;
> > > > > +			status = "disabled";
> > > > > +			assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
> > > > > +					  <&tegra_car TEGRA210_CLK_CILCD>,
> > > > > +					  <&tegra_car TEGRA210_CLK_CILE>;
> > > > > +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
> > > > > +						 <&tegra_car TEGRA210_CLK_PLL_P>,
> > > > > +						 <&tegra_car TEGRA210_CLK_PLL_P>;
> > > > > +			assigned-clock-rates = <102000000>,
> > > > > +					       <102000000>,
> > > > > +					       <102000000>;
> > > > > +
> > > > > +			clocks = <&tegra_car TEGRA210_CLK_CSI>,
> > > > > +				 <&tegra_car TEGRA210_CLK_CILAB>,
> > > > > +				 <&tegra_car TEGRA210_CLK_CILCD>,
> > > > > +				 <&tegra_car TEGRA210_CLK_CILE>;
> > > > > +			clock-names = "csi", "cilab", "cilcd", "cile";
> > > > > +
> > > > >    		};
> > > > Can this be a child of the vi node? Looking at the register ranges it
> > > > seems like these are actually a single IP block. If they have separate
> > > > blocks with clearly separate functionality, then it makes sense to have
> > > > CSI be a child node of VI, though it may also be okay to merge both and
> > > > have a single node with the driver doing all of the differentiation
> > > > between what's VI and what's CSI.
> > > > 
> > > > Looking at later chips, the split between VI and CSI is more explicit,
> > > > so having the split in DT for Tegra210 may make sense for consistency.
> > > > 
> > > > I know we've discussed this before, but for some reason I keep coming
> > > > back to this. I'll go through the other patches to see if I can get a
> > > > clearer picture of how this could all work together.
> > > > 
> > > > Thierry
> > > We can keep it separate as we discussed.
> > > 
> > > But as Tegra186 onwards, CSI is separate device to be all cosistent I kept
> > > CSI as separate node for Tegra210 as well.
> >  From our discussion, my understanding was that CSI would be a separate
> > device, but it would still be a subdevice of VI. The address offset of
> > the CSI registers not being aligned to a power of two is a strong
> > indication that this is really all part of the same block.
> 
> Yes our earlier discussion is to have CSI as subdevice.
> 
> Later looking into T186 and later NVCSI is totally separate so it will be
> separate device and to have driver common moved Tegra210 CSI also as
> separate device instead of having it as subdevice of VI.
> 
> Earlier when we discussed at that time I am using TPG also from device
> graphs but not moved to hard media links inside driver for TPG.
> 
> For this we need CSI to be available prior to VI.

Why is that? Does creating the hard media links need access to a struct
device? What if we created that device in the VI driver without any
reliance on DT? Shouldn't that also work? I have a hard time imagining
that there aren't other devices like this where we don't necessarily
have separate devices for these links.

> If we add CSI as subdevice to VI, CSI will not be available by the time
> VI init happens.

The CSI subdevice should be registered as part of the VI driver's probe,
right? That's typically where you'd call of_platform_populate(). Could
we not set up the hard media links in the ->init() callbacks for the
host1x clients? Those are called after all of the devices have been
probed, so the CSI device should be available at that time.

> Currently host1x subdevices listed has CSI before VI and CSI init happens
> earlier so by the time VI init happens CSI is available to do media links
> b/w VI video entity and CSI subdevice entity.

Okay, I understand how this would be a convenient solution. However, the
device tree is a hardware description, so we need to ignore what we know
about the operating system infrastructure that we want to use when
writing the device tree bindings (and the device tree content) in order
to make sure the same binding will work on a different operating system
which may have a completely different infrastructure (or none at all).

> Also having CSI as separate subdevice (not as subdevice to VI) for T210 will
> be consistent with T186 and later.

Again, I see how that's convenient. But the main difference between
Tegra210 and Tegra186 is that on the former, the CSI is merged with VI,
whereas on the latter the CSI is a completely separate hardware block.

Since device tree describes the hardware, that difference should be
apparent in the device tree. I initially thought as well that it would
be advantageous if both had the same representation, but I do realize
now that this has a significant impact on the device tree, and it
violates the basic principles we base device tree binding design on.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: Re: Re: Re: [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-30 17:58           ` Thierry Reding
@ 2020-01-30 18:58             ` Sowjanya Komatineni
  2020-01-30 20:18               ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-30 18:58 UTC (permalink / raw)
  To: Thierry Reding
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel


On 1/30/20 9:58 AM, Thierry Reding wrote:
> On Thu, Jan 30, 2020 at 09:18:50AM -0800, Sowjanya Komatineni wrote:
>> On 1/30/20 4:36 AM, Thierry Reding wrote:
>>> On Wed, Jan 29, 2020 at 08:22:48AM -0800, Sowjanya Komatineni wrote:
>>>> On 1/29/20 1:46 AM, Thierry Reding wrote:
>>>>> On Tue, Jan 28, 2020 at 10:23:21AM -0800, Sowjanya Komatineni wrote:
>>>>>> Tegra210 contains VI controller for video input capture from MIPI
>>>>>> CSI camera sensors and also supports built-in test pattern generator.
>>>>>>
>>>>>> CSI ports can be one-to-one mapped to VI channels for capturing from
>>>>>> an external sensor or from built-in test pattern generator.
>>>>>>
>>>>>> This patch adds support for VI and CSI and enables them in Tegra210
>>>>>> device tree.
>>>>>>
>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>> ---
>>>>>>     arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi |  8 +++++++
>>>>>>     arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 +++++++++++++++++++++++++-
>>>>>>     2 files changed, 38 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>> index b0095072bc28..ec1b3033fa03 100644
>>>>>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>> @@ -10,6 +10,14 @@
>>>>>>     			status = "okay";
>>>>>>     		};
>>>>>> +		vi@54080000 {
>>>>>> +			status = "okay";
>>>>>> +		};
>>>>>> +
>>>>>> +		csi@0x54080838 {
>>>>>> +			status = "okay";
>>>>>> +		};
>>>>>> +
>>>>>>     		sor@54580000 {
>>>>>>     			status = "okay";
>>>>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>> index 48c63256ba7f..c6107ec03ad1 100644
>>>>>> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>> @@ -136,9 +136,38 @@
>>>>>>     		vi@54080000 {
>>>>>>     			compatible = "nvidia,tegra210-vi";
>>>>>> -			reg = <0x0 0x54080000 0x0 0x00040000>;
>>>>>> +			reg = <0x0 0x54080000 0x0 0x808>;
>>>>>>     			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>>>>>>     			status = "disabled";
>>>>>> +			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
>>>>>> +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
>>>>>> +
>>>>>> +			clocks = <&tegra_car TEGRA210_CLK_VI>;
>>>>>> +			clock-names = "vi";
>>>>>> +			resets = <&tegra_car 20>;
>>>>>> +			reset-names = "vi";
>>>>>> +		};
>>>>>> +
>>>>>> +		csi@0x54080838 {
>>>>>> +			compatible = "nvidia,tegra210-csi";
>>>>>> +			reg = <0x0 0x54080838 0x0 0x2000>;
>>>>>> +			status = "disabled";
>>>>>> +			assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
>>>>>> +					  <&tegra_car TEGRA210_CLK_CILCD>,
>>>>>> +					  <&tegra_car TEGRA210_CLK_CILE>;
>>>>>> +			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
>>>>>> +						 <&tegra_car TEGRA210_CLK_PLL_P>,
>>>>>> +						 <&tegra_car TEGRA210_CLK_PLL_P>;
>>>>>> +			assigned-clock-rates = <102000000>,
>>>>>> +					       <102000000>,
>>>>>> +					       <102000000>;
>>>>>> +
>>>>>> +			clocks = <&tegra_car TEGRA210_CLK_CSI>,
>>>>>> +				 <&tegra_car TEGRA210_CLK_CILAB>,
>>>>>> +				 <&tegra_car TEGRA210_CLK_CILCD>,
>>>>>> +				 <&tegra_car TEGRA210_CLK_CILE>;
>>>>>> +			clock-names = "csi", "cilab", "cilcd", "cile";
>>>>>> +
>>>>>>     		};
>>>>> Can this be a child of the vi node? Looking at the register ranges it
>>>>> seems like these are actually a single IP block. If they have separate
>>>>> blocks with clearly separate functionality, then it makes sense to have
>>>>> CSI be a child node of VI, though it may also be okay to merge both and
>>>>> have a single node with the driver doing all of the differentiation
>>>>> between what's VI and what's CSI.
>>>>>
>>>>> Looking at later chips, the split between VI and CSI is more explicit,
>>>>> so having the split in DT for Tegra210 may make sense for consistency.
>>>>>
>>>>> I know we've discussed this before, but for some reason I keep coming
>>>>> back to this. I'll go through the other patches to see if I can get a
>>>>> clearer picture of how this could all work together.
>>>>>
>>>>> Thierry
>>>> We can keep it separate as we discussed.
>>>>
>>>> But as Tegra186 onwards, CSI is separate device to be all cosistent I kept
>>>> CSI as separate node for Tegra210 as well.
>>>   From our discussion, my understanding was that CSI would be a separate
>>> device, but it would still be a subdevice of VI. The address offset of
>>> the CSI registers not being aligned to a power of two is a strong
>>> indication that this is really all part of the same block.
>> Yes our earlier discussion is to have CSI as subdevice.
>>
>> Later looking into T186 and later NVCSI is totally separate so it will be
>> separate device and to have driver common moved Tegra210 CSI also as
>> separate device instead of having it as subdevice of VI.
>>
>> Earlier when we discussed at that time I am using TPG also from device
>> graphs but not moved to hard media links inside driver for TPG.
>>
>> For this we need CSI to be available prior to VI.
> Why is that? Does creating the hard media links need access to a struct
> device? What if we created that device in the VI driver without any
> reliance on DT? Shouldn't that also work? I have a hard time imagining
> that there aren't other devices like this where we don't necessarily
> have separate devices for these links.
Yes we need CSI structure for hard link TPG also as all csi channel list 
is part of CSI device.

We can create CSI channel subdevices within VI without using CSI device 
from a separate CSI driver probe for Tegra210 and make all subdev 
related ops implementations as global so they can be used from VI driver 
for Tegra210 and can also be used for Tegra186 and later in separate CSI 
driver.

During creating media links in VI driver for TPG, for T210 we can use 
local CSI device structure and for T186+ we can use CSI device structure 
created during CSI probe.

Sorry, I didn't understood what you meant by separate devices for these 
link.

We only have Tegra CSI linked to Tegra VI for TPG/Real sensor.

>> If we add CSI as subdevice to VI, CSI will not be available by the time
>> VI init happens.
> The CSI subdevice should be registered as part of the VI driver's probe,
> right? That's typically where you'd call of_platform_populate(). Could
> we not set up the hard media links in the ->init() callbacks for the
> host1x clients? Those are called after all of the devices have been
> probed, so the CSI device should be available at that time.
>
>> Currently host1x subdevices listed has CSI before VI and CSI init happens
>> earlier so by the time VI init happens CSI is available to do media links
>> b/w VI video entity and CSI subdevice entity.
> Okay, I understand how this would be a convenient solution. However, the
> device tree is a hardware description, so we need to ignore what we know
> about the operating system infrastructure that we want to use when
> writing the device tree bindings (and the device tree content) in order
> to make sure the same binding will work on a different operating system
> which may have a completely different infrastructure (or none at all).
>
>> Also having CSI as separate subdevice (not as subdevice to VI) for T210 will
>> be consistent with T186 and later.
> Again, I see how that's convenient. But the main difference between
> Tegra210 and Tegra186 is that on the former, the CSI is merged with VI,
> whereas on the latter the CSI is a completely separate hardware block.
>
> Since device tree describes the hardware, that difference should be
> apparent in the device tree. I initially thought as well that it would
> be advantageous if both had the same representation, but I do realize
> now that this has a significant impact on the device tree, and it
> violates the basic principles we base device tree binding design on.
>
> Thierry

I just thought of driver implementation being common b/w T210 and T186+ 
by having CSI as separate device node rather than as child node to VI to 
avoid CSI structure handling within VI for T210 only.

Will update DT and driver to have CSI as child node of VI for T210.



^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-30 18:58             ` Sowjanya Komatineni
@ 2020-01-30 20:18               ` Sowjanya Komatineni
  2020-01-31  2:57                 ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-30 20:18 UTC (permalink / raw)
  To: Thierry Reding
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel


On 1/30/20 10:58 AM, Sowjanya Komatineni wrote:
>
> On 1/30/20 9:58 AM, Thierry Reding wrote:
>> On Thu, Jan 30, 2020 at 09:18:50AM -0800, Sowjanya Komatineni wrote:
>>> On 1/30/20 4:36 AM, Thierry Reding wrote:
>>>> On Wed, Jan 29, 2020 at 08:22:48AM -0800, Sowjanya Komatineni wrote:
>>>>> On 1/29/20 1:46 AM, Thierry Reding wrote:
>>>>>> On Tue, Jan 28, 2020 at 10:23:21AM -0800, Sowjanya Komatineni wrote:
>>>>>>> Tegra210 contains VI controller for video input capture from MIPI
>>>>>>> CSI camera sensors and also supports built-in test pattern 
>>>>>>> generator.
>>>>>>>
>>>>>>> CSI ports can be one-to-one mapped to VI channels for capturing 
>>>>>>> from
>>>>>>> an external sensor or from built-in test pattern generator.
>>>>>>>
>>>>>>> This patch adds support for VI and CSI and enables them in Tegra210
>>>>>>> device tree.
>>>>>>>
>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>> ---
>>>>>>>     arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 8 +++++++
>>>>>>>     arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 
>>>>>>> +++++++++++++++++++++++++-
>>>>>>>     2 files changed, 38 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi 
>>>>>>> b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>>> index b0095072bc28..ec1b3033fa03 100644
>>>>>>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>>> @@ -10,6 +10,14 @@
>>>>>>>                 status = "okay";
>>>>>>>             };
>>>>>>> +        vi@54080000 {
>>>>>>> +            status = "okay";
>>>>>>> +        };
>>>>>>> +
>>>>>>> +        csi@0x54080838 {
>>>>>>> +            status = "okay";
>>>>>>> +        };
>>>>>>> +
>>>>>>>             sor@54580000 {
>>>>>>>                 status = "okay";
>>>>>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi 
>>>>>>> b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>>> index 48c63256ba7f..c6107ec03ad1 100644
>>>>>>> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>>> @@ -136,9 +136,38 @@
>>>>>>>             vi@54080000 {
>>>>>>>                 compatible = "nvidia,tegra210-vi";
>>>>>>> -            reg = <0x0 0x54080000 0x0 0x00040000>;
>>>>>>> +            reg = <0x0 0x54080000 0x0 0x808>;
>>>>>>>                 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>>>>>>>                 status = "disabled";
>>>>>>> +            assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
>>>>>>> +            assigned-clock-parents = <&tegra_car 
>>>>>>> TEGRA210_CLK_PLL_C4_OUT0>;
>>>>>>> +
>>>>>>> +            clocks = <&tegra_car TEGRA210_CLK_VI>;
>>>>>>> +            clock-names = "vi";
>>>>>>> +            resets = <&tegra_car 20>;
>>>>>>> +            reset-names = "vi";
>>>>>>> +        };
>>>>>>> +
>>>>>>> +        csi@0x54080838 {
>>>>>>> +            compatible = "nvidia,tegra210-csi";
>>>>>>> +            reg = <0x0 0x54080838 0x0 0x2000>;
>>>>>>> +            status = "disabled";
>>>>>>> +            assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
>>>>>>> +                      <&tegra_car TEGRA210_CLK_CILCD>,
>>>>>>> +                      <&tegra_car TEGRA210_CLK_CILE>;
>>>>>>> +            assigned-clock-parents = <&tegra_car 
>>>>>>> TEGRA210_CLK_PLL_P>,
>>>>>>> +                         <&tegra_car TEGRA210_CLK_PLL_P>,
>>>>>>> +                         <&tegra_car TEGRA210_CLK_PLL_P>;
>>>>>>> +            assigned-clock-rates = <102000000>,
>>>>>>> +                           <102000000>,
>>>>>>> +                           <102000000>;
>>>>>>> +
>>>>>>> +            clocks = <&tegra_car TEGRA210_CLK_CSI>,
>>>>>>> +                 <&tegra_car TEGRA210_CLK_CILAB>,
>>>>>>> +                 <&tegra_car TEGRA210_CLK_CILCD>,
>>>>>>> +                 <&tegra_car TEGRA210_CLK_CILE>;
>>>>>>> +            clock-names = "csi", "cilab", "cilcd", "cile";
>>>>>>> +
>>>>>>>             };
>>>>>> Can this be a child of the vi node? Looking at the register 
>>>>>> ranges it
>>>>>> seems like these are actually a single IP block. If they have 
>>>>>> separate
>>>>>> blocks with clearly separate functionality, then it makes sense 
>>>>>> to have
>>>>>> CSI be a child node of VI, though it may also be okay to merge 
>>>>>> both and
>>>>>> have a single node with the driver doing all of the differentiation
>>>>>> between what's VI and what's CSI.
>>>>>>
>>>>>> Looking at later chips, the split between VI and CSI is more 
>>>>>> explicit,
>>>>>> so having the split in DT for Tegra210 may make sense for 
>>>>>> consistency.
>>>>>>
>>>>>> I know we've discussed this before, but for some reason I keep 
>>>>>> coming
>>>>>> back to this. I'll go through the other patches to see if I can 
>>>>>> get a
>>>>>> clearer picture of how this could all work together.
>>>>>>
>>>>>> Thierry
>>>>> We can keep it separate as we discussed.
>>>>>
>>>>> But as Tegra186 onwards, CSI is separate device to be all 
>>>>> cosistent I kept
>>>>> CSI as separate node for Tegra210 as well.
>>>>   From our discussion, my understanding was that CSI would be a 
>>>> separate
>>>> device, but it would still be a subdevice of VI. The address offset of
>>>> the CSI registers not being aligned to a power of two is a strong
>>>> indication that this is really all part of the same block.
>>> Yes our earlier discussion is to have CSI as subdevice.
>>>
>>> Later looking into T186 and later NVCSI is totally separate so it 
>>> will be
>>> separate device and to have driver common moved Tegra210 CSI also as
>>> separate device instead of having it as subdevice of VI.
>>>
>>> Earlier when we discussed at that time I am using TPG also from device
>>> graphs but not moved to hard media links inside driver for TPG.
>>>
>>> For this we need CSI to be available prior to VI.
>> Why is that? Does creating the hard media links need access to a struct
>> device? What if we created that device in the VI driver without any
>> reliance on DT? Shouldn't that also work? I have a hard time imagining
>> that there aren't other devices like this where we don't necessarily
>> have separate devices for these links.
> Yes we need CSI structure for hard link TPG also as all csi channel 
> list is part of CSI device.
>
> We can create CSI channel subdevices within VI without using CSI 
> device from a separate CSI driver probe for Tegra210 and make all 
> subdev related ops implementations as global so they can be used from 
> VI driver for Tegra210 and can also be used for Tegra186 and later in 
> separate CSI driver.
>
> During creating media links in VI driver for TPG, for T210 we can use 
> local CSI device structure and for T186+ we can use CSI device 
> structure created during CSI probe.
>
> Sorry, I didn't understood what you meant by separate devices for 
> these link.
>
> We only have Tegra CSI linked to Tegra VI for TPG/Real sensor.
>
>>> If we add CSI as subdevice to VI, CSI will not be available by the time
>>> VI init happens.
>> The CSI subdevice should be registered as part of the VI driver's probe,
>> right? That's typically where you'd call of_platform_populate(). Could
>> we not set up the hard media links in the ->init() callbacks for the
>> host1x clients? Those are called after all of the devices have been
>> probed, so the CSI device should be available at that time.
>>
yes, will update to have CSI as child node to VI
>>> Currently host1x subdevices listed has CSI before VI and CSI init 
>>> happens
>>> earlier so by the time VI init happens CSI is available to do media 
>>> links
>>> b/w VI video entity and CSI subdevice entity.
>> Okay, I understand how this would be a convenient solution. However, the
>> device tree is a hardware description, so we need to ignore what we know
>> about the operating system infrastructure that we want to use when
>> writing the device tree bindings (and the device tree content) in order
>> to make sure the same binding will work on a different operating system
>> which may have a completely different infrastructure (or none at all).
>>
>>> Also having CSI as separate subdevice (not as subdevice to VI) for 
>>> T210 will
>>> be consistent with T186 and later.
>> Again, I see how that's convenient. But the main difference between
>> Tegra210 and Tegra186 is that on the former, the CSI is merged with VI,
>> whereas on the latter the CSI is a completely separate hardware block.
>>
>> Since device tree describes the hardware, that difference should be
>> apparent in the device tree. I initially thought as well that it would
>> be advantageous if both had the same representation, but I do realize
>> now that this has a significant impact on the device tree, and it
>> violates the basic principles we base device tree binding design on.
>>
>> Thierry
>
> I just thought of driver implementation being common b/w T210 and 
> T186+ by having CSI as separate device node rather than as child node 
> to VI to avoid CSI structure handling within VI for T210 only.
>
> Will update DT and driver to have CSI as child node of VI for T210.
>
>

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree
  2020-01-30 20:18               ` Sowjanya Komatineni
@ 2020-01-31  2:57                 ` Sowjanya Komatineni
  0 siblings, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-01-31  2:57 UTC (permalink / raw)
  To: Thierry Reding
  Cc: jonathanh, frankc, hverkuil, linux-media, devicetree, linux-clk,
	linux-tegra, linux-kernel

Hi Thierry

Currently all channels allocation and creating media links are all in vi 
init client ops.

So just populating CSI child from VI with moving CSI as child node to VI 
for Tegra210 should work.

Will have all the fixes in v2 along with link_validate implementations 
and merging files to have it simpler.

Thanks

Sowjanya



On 1/30/20 12:18 PM, Sowjanya Komatineni wrote:
>
> On 1/30/20 10:58 AM, Sowjanya Komatineni wrote:
>>
>> On 1/30/20 9:58 AM, Thierry Reding wrote:
>>> On Thu, Jan 30, 2020 at 09:18:50AM -0800, Sowjanya Komatineni wrote:
>>>> On 1/30/20 4:36 AM, Thierry Reding wrote:
>>>>> On Wed, Jan 29, 2020 at 08:22:48AM -0800, Sowjanya Komatineni wrote:
>>>>>> On 1/29/20 1:46 AM, Thierry Reding wrote:
>>>>>>> On Tue, Jan 28, 2020 at 10:23:21AM -0800, Sowjanya Komatineni 
>>>>>>> wrote:
>>>>>>>> Tegra210 contains VI controller for video input capture from MIPI
>>>>>>>> CSI camera sensors and also supports built-in test pattern 
>>>>>>>> generator.
>>>>>>>>
>>>>>>>> CSI ports can be one-to-one mapped to VI channels for capturing 
>>>>>>>> from
>>>>>>>> an external sensor or from built-in test pattern generator.
>>>>>>>>
>>>>>>>> This patch adds support for VI and CSI and enables them in 
>>>>>>>> Tegra210
>>>>>>>> device tree.
>>>>>>>>
>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>>> ---
>>>>>>>>     arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 8 +++++++
>>>>>>>>     arch/arm64/boot/dts/nvidia/tegra210.dtsi       | 31 
>>>>>>>> +++++++++++++++++++++++++-
>>>>>>>>     2 files changed, 38 insertions(+), 1 deletion(-)
>>>>>>>>
>>>>>>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi 
>>>>>>>> b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>>>> index b0095072bc28..ec1b3033fa03 100644
>>>>>>>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>>>>>>>> @@ -10,6 +10,14 @@
>>>>>>>>                 status = "okay";
>>>>>>>>             };
>>>>>>>> +        vi@54080000 {
>>>>>>>> +            status = "okay";
>>>>>>>> +        };
>>>>>>>> +
>>>>>>>> +        csi@0x54080838 {
>>>>>>>> +            status = "okay";
>>>>>>>> +        };
>>>>>>>> +
>>>>>>>>             sor@54580000 {
>>>>>>>>                 status = "okay";
>>>>>>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi 
>>>>>>>> b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>>>> index 48c63256ba7f..c6107ec03ad1 100644
>>>>>>>> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
>>>>>>>> @@ -136,9 +136,38 @@
>>>>>>>>             vi@54080000 {
>>>>>>>>                 compatible = "nvidia,tegra210-vi";
>>>>>>>> -            reg = <0x0 0x54080000 0x0 0x00040000>;
>>>>>>>> +            reg = <0x0 0x54080000 0x0 0x808>;
>>>>>>>>                 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>>>>>>>>                 status = "disabled";
>>>>>>>> +            assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
>>>>>>>> +            assigned-clock-parents = <&tegra_car 
>>>>>>>> TEGRA210_CLK_PLL_C4_OUT0>;
>>>>>>>> +
>>>>>>>> +            clocks = <&tegra_car TEGRA210_CLK_VI>;
>>>>>>>> +            clock-names = "vi";
>>>>>>>> +            resets = <&tegra_car 20>;
>>>>>>>> +            reset-names = "vi";
>>>>>>>> +        };
>>>>>>>> +
>>>>>>>> +        csi@0x54080838 {
>>>>>>>> +            compatible = "nvidia,tegra210-csi";
>>>>>>>> +            reg = <0x0 0x54080838 0x0 0x2000>;
>>>>>>>> +            status = "disabled";
>>>>>>>> +            assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
>>>>>>>> +                      <&tegra_car TEGRA210_CLK_CILCD>,
>>>>>>>> +                      <&tegra_car TEGRA210_CLK_CILE>;
>>>>>>>> +            assigned-clock-parents = <&tegra_car 
>>>>>>>> TEGRA210_CLK_PLL_P>,
>>>>>>>> +                         <&tegra_car TEGRA210_CLK_PLL_P>,
>>>>>>>> +                         <&tegra_car TEGRA210_CLK_PLL_P>;
>>>>>>>> +            assigned-clock-rates = <102000000>,
>>>>>>>> +                           <102000000>,
>>>>>>>> +                           <102000000>;
>>>>>>>> +
>>>>>>>> +            clocks = <&tegra_car TEGRA210_CLK_CSI>,
>>>>>>>> +                 <&tegra_car TEGRA210_CLK_CILAB>,
>>>>>>>> +                 <&tegra_car TEGRA210_CLK_CILCD>,
>>>>>>>> +                 <&tegra_car TEGRA210_CLK_CILE>;
>>>>>>>> +            clock-names = "csi", "cilab", "cilcd", "cile";
>>>>>>>> +
>>>>>>>>             };
>>>>>>> Can this be a child of the vi node? Looking at the register 
>>>>>>> ranges it
>>>>>>> seems like these are actually a single IP block. If they have 
>>>>>>> separate
>>>>>>> blocks with clearly separate functionality, then it makes sense 
>>>>>>> to have
>>>>>>> CSI be a child node of VI, though it may also be okay to merge 
>>>>>>> both and
>>>>>>> have a single node with the driver doing all of the differentiation
>>>>>>> between what's VI and what's CSI.
>>>>>>>
>>>>>>> Looking at later chips, the split between VI and CSI is more 
>>>>>>> explicit,
>>>>>>> so having the split in DT for Tegra210 may make sense for 
>>>>>>> consistency.
>>>>>>>
>>>>>>> I know we've discussed this before, but for some reason I keep 
>>>>>>> coming
>>>>>>> back to this. I'll go through the other patches to see if I can 
>>>>>>> get a
>>>>>>> clearer picture of how this could all work together.
>>>>>>>
>>>>>>> Thierry
>>>>>> We can keep it separate as we discussed.
>>>>>>
>>>>>> But as Tegra186 onwards, CSI is separate device to be all 
>>>>>> cosistent I kept
>>>>>> CSI as separate node for Tegra210 as well.
>>>>>   From our discussion, my understanding was that CSI would be a 
>>>>> separate
>>>>> device, but it would still be a subdevice of VI. The address 
>>>>> offset of
>>>>> the CSI registers not being aligned to a power of two is a strong
>>>>> indication that this is really all part of the same block.
>>>> Yes our earlier discussion is to have CSI as subdevice.
>>>>
>>>> Later looking into T186 and later NVCSI is totally separate so it 
>>>> will be
>>>> separate device and to have driver common moved Tegra210 CSI also as
>>>> separate device instead of having it as subdevice of VI.
>>>>
>>>> Earlier when we discussed at that time I am using TPG also from device
>>>> graphs but not moved to hard media links inside driver for TPG.
>>>>
>>>> For this we need CSI to be available prior to VI.
>>> Why is that? Does creating the hard media links need access to a struct
>>> device? What if we created that device in the VI driver without any
>>> reliance on DT? Shouldn't that also work? I have a hard time imagining
>>> that there aren't other devices like this where we don't necessarily
>>> have separate devices for these links.
>> Yes we need CSI structure for hard link TPG also as all csi channel 
>> list is part of CSI device.
>>
>> We can create CSI channel subdevices within VI without using CSI 
>> device from a separate CSI driver probe for Tegra210 and make all 
>> subdev related ops implementations as global so they can be used from 
>> VI driver for Tegra210 and can also be used for Tegra186 and later in 
>> separate CSI driver.
>>
>> During creating media links in VI driver for TPG, for T210 we can use 
>> local CSI device structure and for T186+ we can use CSI device 
>> structure created during CSI probe.
>>
>> Sorry, I didn't understood what you meant by separate devices for 
>> these link.
>>
>> We only have Tegra CSI linked to Tegra VI for TPG/Real sensor.
>>
>>>> If we add CSI as subdevice to VI, CSI will not be available by the 
>>>> time
>>>> VI init happens.
>>> The CSI subdevice should be registered as part of the VI driver's 
>>> probe,
>>> right? That's typically where you'd call of_platform_populate(). Could
>>> we not set up the hard media links in the ->init() callbacks for the
>>> host1x clients? Those are called after all of the devices have been
>>> probed, so the CSI device should be available at that time.
>>>
> yes, will update to have CSI as child node to VI
>>>> Currently host1x subdevices listed has CSI before VI and CSI init 
>>>> happens
>>>> earlier so by the time VI init happens CSI is available to do media 
>>>> links
>>>> b/w VI video entity and CSI subdevice entity.
>>> Okay, I understand how this would be a convenient solution. However, 
>>> the
>>> device tree is a hardware description, so we need to ignore what we 
>>> know
>>> about the operating system infrastructure that we want to use when
>>> writing the device tree bindings (and the device tree content) in order
>>> to make sure the same binding will work on a different operating system
>>> which may have a completely different infrastructure (or none at all).
>>>
>>>> Also having CSI as separate subdevice (not as subdevice to VI) for 
>>>> T210 will
>>>> be consistent with T186 and later.
>>> Again, I see how that's convenient. But the main difference between
>>> Tegra210 and Tegra186 is that on the former, the CSI is merged with VI,
>>> whereas on the latter the CSI is a completely separate hardware block.
>>>
>>> Since device tree describes the hardware, that difference should be
>>> apparent in the device tree. I initially thought as well that it would
>>> be advantageous if both had the same representation, but I do realize
>>> now that this has a significant impact on the device tree, and it
>>> violates the basic principles we base device tree binding design on.
>>>
>>> Thierry
>>
>> I just thought of driver implementation being common b/w T210 and 
>> T186+ by having CSI as separate device node rather than as child node 
>> to VI to avoid CSI structure handling within VI for T210 only.
>>
>> Will update DT and driver to have CSI as child node of VI for T210.
>>
>>

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-30 15:42   ` Thierry Reding
@ 2020-01-31 14:29     ` Hans Verkuil
  2020-01-31 17:03       ` Thierry Reding
  0 siblings, 1 reply; 55+ messages in thread
From: Hans Verkuil @ 2020-01-31 14:29 UTC (permalink / raw)
  To: Thierry Reding
  Cc: Sowjanya Komatineni, jonathanh, frankc, linux-media, devicetree,
	linux-clk, linux-tegra, linux-kernel

On 1/30/20 4:42 PM, Thierry Reding wrote:
> On Thu, Jan 30, 2020 at 03:41:50PM +0100, Hans Verkuil wrote:
>> Hi Sowjanya,
>>
>> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
>>> This series adds Tegra210 VI and CSI driver for built-in test pattern
>>> generator (TPG) capture.
>>>
>>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
>>> CSI port is one-to-one mapped to VI channel for video capture.
>>>
>>> This series has TPG support only where it creates hard media links
>>> between CSI subdevice and VI video device without device graphs.
>>>
>>> v4l2-compliance results are available below the patch diff.
>>>
>>> [v0]:	Includes,
>>> 	- Adds CSI TPG clock to Tegra210 clock driver
>>> 	- Host1x video driver with VI and CSI clients.
>>> 	- Support for Tegra210 only.
>>> 	- VI CSI TPG support with hard media links in driver.
>>> 	- Video formats supported by Tegra210 VI
>>> 	- CSI TPG supported video formats
>>
>> I'm trying to compile this patch series using the media_tree master
>> branch (https://git.linuxtv.org//media_tree.git), but it fails:
>>
>> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_queue_setup’:
>> drivers/staging/media/tegra/tegra-channel.c:71:15: warning: unused variable ‘count’ [-Wunused-variable]
>>    71 |  unsigned int count = *nbuffers;
>>       |               ^~~~~
>> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_init’:
>> drivers/staging/media/tegra/tegra-channel.c:518:55: error: ‘struct host1x_client’ has no member named ‘host’
>>   518 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>>       |                                                       ^
>> make[4]: *** [scripts/Makefile.build:265: drivers/staging/media/tegra/tegra-channel.o] Error 1
>> make[4]: *** Waiting for unfinished jobs....
>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_tpg_graph_init’:
>> drivers/staging/media/tegra/tegra-vi.c:157:55: error: ‘struct host1x_client’ has no member named ‘host’
>>   157 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>>       |                                                       ^
>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_init’:
>> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_init’:
>> drivers/staging/media/tegra/tegra-vi.c:213:51: error: ‘struct host1x_client’ has no member named ‘host’
>>   213 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>       |                                                   ^~
>> drivers/staging/media/tegra/tegra-csi.c:259:51: error: ‘struct host1x_client’ has no member named ‘host’
>>   259 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>       |                                                   ^~
>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_exit’:
>> drivers/staging/media/tegra/tegra-vi.c:246:51: error: ‘struct host1x_client’ has no member named ‘host’
>>   246 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>       |                                                   ^~
>> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_exit’:
>> drivers/staging/media/tegra/tegra-csi.c:286:51: error: ‘struct host1x_client’ has no member named ‘host’
>>   286 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>       |                                                   ^~
>>
>> And indeed, struct host1x_client as defined in include/linux/host1x.h doesn't
>> have a 'host' field.
>>
>> Does this series depend on another patch that's not yet in mainline?
> 
> Sowjanya's been working on top of linux-next, so, yes, this patch
> depends on a change that's been merged into the DRM tree for v5.6-rc1.
> 
> Thierry
> 

Is there a specific linux-next tag that works? I tried next-20200131 but that
failed to boot. Same problem with the mainline repo since the host1x patches
were merged yesterday. It compiles fine, but the boot just stops. Or am I
missing some kernel config that is now important to have?

Regards,

	Hans

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-31 14:29     ` Hans Verkuil
@ 2020-01-31 17:03       ` Thierry Reding
  2020-01-31 17:37         ` Hans Verkuil
  2020-02-04  9:50         ` Hans Verkuil
  0 siblings, 2 replies; 55+ messages in thread
From: Thierry Reding @ 2020-01-31 17:03 UTC (permalink / raw)
  To: Hans Verkuil
  Cc: Sowjanya Komatineni, jonathanh, frankc, linux-media, devicetree,
	linux-clk, linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 4740 bytes --]

On Fri, Jan 31, 2020 at 03:29:52PM +0100, Hans Verkuil wrote:
> On 1/30/20 4:42 PM, Thierry Reding wrote:
> > On Thu, Jan 30, 2020 at 03:41:50PM +0100, Hans Verkuil wrote:
> >> Hi Sowjanya,
> >>
> >> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
> >>> This series adds Tegra210 VI and CSI driver for built-in test pattern
> >>> generator (TPG) capture.
> >>>
> >>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
> >>> CSI port is one-to-one mapped to VI channel for video capture.
> >>>
> >>> This series has TPG support only where it creates hard media links
> >>> between CSI subdevice and VI video device without device graphs.
> >>>
> >>> v4l2-compliance results are available below the patch diff.
> >>>
> >>> [v0]:	Includes,
> >>> 	- Adds CSI TPG clock to Tegra210 clock driver
> >>> 	- Host1x video driver with VI and CSI clients.
> >>> 	- Support for Tegra210 only.
> >>> 	- VI CSI TPG support with hard media links in driver.
> >>> 	- Video formats supported by Tegra210 VI
> >>> 	- CSI TPG supported video formats
> >>
> >> I'm trying to compile this patch series using the media_tree master
> >> branch (https://git.linuxtv.org//media_tree.git), but it fails:
> >>
> >> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_queue_setup’:
> >> drivers/staging/media/tegra/tegra-channel.c:71:15: warning: unused variable ‘count’ [-Wunused-variable]
> >>    71 |  unsigned int count = *nbuffers;
> >>       |               ^~~~~
> >> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_init’:
> >> drivers/staging/media/tegra/tegra-channel.c:518:55: error: ‘struct host1x_client’ has no member named ‘host’
> >>   518 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
> >>       |                                                       ^
> >> make[4]: *** [scripts/Makefile.build:265: drivers/staging/media/tegra/tegra-channel.o] Error 1
> >> make[4]: *** Waiting for unfinished jobs....
> >> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_tpg_graph_init’:
> >> drivers/staging/media/tegra/tegra-vi.c:157:55: error: ‘struct host1x_client’ has no member named ‘host’
> >>   157 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
> >>       |                                                       ^
> >> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_init’:
> >> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_init’:
> >> drivers/staging/media/tegra/tegra-vi.c:213:51: error: ‘struct host1x_client’ has no member named ‘host’
> >>   213 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
> >>       |                                                   ^~
> >> drivers/staging/media/tegra/tegra-csi.c:259:51: error: ‘struct host1x_client’ has no member named ‘host’
> >>   259 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
> >>       |                                                   ^~
> >> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_exit’:
> >> drivers/staging/media/tegra/tegra-vi.c:246:51: error: ‘struct host1x_client’ has no member named ‘host’
> >>   246 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
> >>       |                                                   ^~
> >> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_exit’:
> >> drivers/staging/media/tegra/tegra-csi.c:286:51: error: ‘struct host1x_client’ has no member named ‘host’
> >>   286 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
> >>       |                                                   ^~
> >>
> >> And indeed, struct host1x_client as defined in include/linux/host1x.h doesn't
> >> have a 'host' field.
> >>
> >> Does this series depend on another patch that's not yet in mainline?
> > 
> > Sowjanya's been working on top of linux-next, so, yes, this patch
> > depends on a change that's been merged into the DRM tree for v5.6-rc1.
> > 
> > Thierry
> > 
> 
> Is there a specific linux-next tag that works? I tried next-20200131 but that
> failed to boot. Same problem with the mainline repo since the host1x patches
> were merged yesterday. It compiles fine, but the boot just stops. Or am I
> missing some kernel config that is now important to have?

linux-next and mainline are currently regressing on Tegra210 (and some
Tegra124) boards. I just sent out a series that fixes the regression for
me:

	http://patchwork.ozlabs.org/project/linux-tegra/list/?series=156215

Please test if this works for you. If so, I'll send this to Dave as soon
as possible.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-31 17:03       ` Thierry Reding
@ 2020-01-31 17:37         ` Hans Verkuil
  2020-01-31 20:31           ` Thierry Reding
  2020-02-04  9:50         ` Hans Verkuil
  1 sibling, 1 reply; 55+ messages in thread
From: Hans Verkuil @ 2020-01-31 17:37 UTC (permalink / raw)
  To: Thierry Reding
  Cc: Sowjanya Komatineni, jonathanh, frankc, linux-media, devicetree,
	linux-clk, linux-tegra, linux-kernel

On 1/31/20 6:03 PM, Thierry Reding wrote:
> On Fri, Jan 31, 2020 at 03:29:52PM +0100, Hans Verkuil wrote:
>> On 1/30/20 4:42 PM, Thierry Reding wrote:
>>> On Thu, Jan 30, 2020 at 03:41:50PM +0100, Hans Verkuil wrote:
>>>> Hi Sowjanya,
>>>>
>>>> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
>>>>> This series adds Tegra210 VI and CSI driver for built-in test pattern
>>>>> generator (TPG) capture.
>>>>>
>>>>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
>>>>> CSI port is one-to-one mapped to VI channel for video capture.
>>>>>
>>>>> This series has TPG support only where it creates hard media links
>>>>> between CSI subdevice and VI video device without device graphs.
>>>>>
>>>>> v4l2-compliance results are available below the patch diff.
>>>>>
>>>>> [v0]:	Includes,
>>>>> 	- Adds CSI TPG clock to Tegra210 clock driver
>>>>> 	- Host1x video driver with VI and CSI clients.
>>>>> 	- Support for Tegra210 only.
>>>>> 	- VI CSI TPG support with hard media links in driver.
>>>>> 	- Video formats supported by Tegra210 VI
>>>>> 	- CSI TPG supported video formats
>>>>
>>>> I'm trying to compile this patch series using the media_tree master
>>>> branch (https://git.linuxtv.org//media_tree.git), but it fails:
>>>>
>>>> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_queue_setup’:
>>>> drivers/staging/media/tegra/tegra-channel.c:71:15: warning: unused variable ‘count’ [-Wunused-variable]
>>>>    71 |  unsigned int count = *nbuffers;
>>>>       |               ^~~~~
>>>> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_init’:
>>>> drivers/staging/media/tegra/tegra-channel.c:518:55: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   518 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>>>>       |                                                       ^
>>>> make[4]: *** [scripts/Makefile.build:265: drivers/staging/media/tegra/tegra-channel.o] Error 1
>>>> make[4]: *** Waiting for unfinished jobs....
>>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_tpg_graph_init’:
>>>> drivers/staging/media/tegra/tegra-vi.c:157:55: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   157 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>>>>       |                                                       ^
>>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_init’:
>>>> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_init’:
>>>> drivers/staging/media/tegra/tegra-vi.c:213:51: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   213 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>>>       |                                                   ^~
>>>> drivers/staging/media/tegra/tegra-csi.c:259:51: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   259 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>>>       |                                                   ^~
>>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_exit’:
>>>> drivers/staging/media/tegra/tegra-vi.c:246:51: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   246 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>>>       |                                                   ^~
>>>> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_exit’:
>>>> drivers/staging/media/tegra/tegra-csi.c:286:51: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   286 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>>>       |                                                   ^~
>>>>
>>>> And indeed, struct host1x_client as defined in include/linux/host1x.h doesn't
>>>> have a 'host' field.
>>>>
>>>> Does this series depend on another patch that's not yet in mainline?
>>>
>>> Sowjanya's been working on top of linux-next, so, yes, this patch
>>> depends on a change that's been merged into the DRM tree for v5.6-rc1.
>>>
>>> Thierry
>>>
>>
>> Is there a specific linux-next tag that works? I tried next-20200131 but that
>> failed to boot. Same problem with the mainline repo since the host1x patches
>> were merged yesterday. It compiles fine, but the boot just stops. Or am I
>> missing some kernel config that is now important to have?
> 
> linux-next and mainline are currently regressing on Tegra210 (and some
> Tegra124) boards. I just sent out a series that fixes the regression for
> me:
> 
> 	http://patchwork.ozlabs.org/project/linux-tegra/list/?series=156215
> 
> Please test if this works for you. If so, I'll send this to Dave as soon
> as possible.

I'll try it on Tuesday as I don't have access to the Jetson TX1 until then. It
looks promising since I think that the last message I saw was a PM message.

Regards,

	Hans

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-31 17:37         ` Hans Verkuil
@ 2020-01-31 20:31           ` Thierry Reding
  0 siblings, 0 replies; 55+ messages in thread
From: Thierry Reding @ 2020-01-31 20:31 UTC (permalink / raw)
  To: Hans Verkuil
  Cc: Sowjanya Komatineni, jonathanh, frankc, linux-media, devicetree,
	linux-clk, linux-tegra, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 5457 bytes --]

On Fri, Jan 31, 2020 at 06:37:10PM +0100, Hans Verkuil wrote:
> On 1/31/20 6:03 PM, Thierry Reding wrote:
> > On Fri, Jan 31, 2020 at 03:29:52PM +0100, Hans Verkuil wrote:
> >> On 1/30/20 4:42 PM, Thierry Reding wrote:
> >>> On Thu, Jan 30, 2020 at 03:41:50PM +0100, Hans Verkuil wrote:
> >>>> Hi Sowjanya,
> >>>>
> >>>> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
> >>>>> This series adds Tegra210 VI and CSI driver for built-in test pattern
> >>>>> generator (TPG) capture.
> >>>>>
> >>>>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
> >>>>> CSI port is one-to-one mapped to VI channel for video capture.
> >>>>>
> >>>>> This series has TPG support only where it creates hard media links
> >>>>> between CSI subdevice and VI video device without device graphs.
> >>>>>
> >>>>> v4l2-compliance results are available below the patch diff.
> >>>>>
> >>>>> [v0]:	Includes,
> >>>>> 	- Adds CSI TPG clock to Tegra210 clock driver
> >>>>> 	- Host1x video driver with VI and CSI clients.
> >>>>> 	- Support for Tegra210 only.
> >>>>> 	- VI CSI TPG support with hard media links in driver.
> >>>>> 	- Video formats supported by Tegra210 VI
> >>>>> 	- CSI TPG supported video formats
> >>>>
> >>>> I'm trying to compile this patch series using the media_tree master
> >>>> branch (https://git.linuxtv.org//media_tree.git), but it fails:
> >>>>
> >>>> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_queue_setup’:
> >>>> drivers/staging/media/tegra/tegra-channel.c:71:15: warning: unused variable ‘count’ [-Wunused-variable]
> >>>>    71 |  unsigned int count = *nbuffers;
> >>>>       |               ^~~~~
> >>>> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_init’:
> >>>> drivers/staging/media/tegra/tegra-channel.c:518:55: error: ‘struct host1x_client’ has no member named ‘host’
> >>>>   518 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
> >>>>       |                                                       ^
> >>>> make[4]: *** [scripts/Makefile.build:265: drivers/staging/media/tegra/tegra-channel.o] Error 1
> >>>> make[4]: *** Waiting for unfinished jobs....
> >>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_tpg_graph_init’:
> >>>> drivers/staging/media/tegra/tegra-vi.c:157:55: error: ‘struct host1x_client’ has no member named ‘host’
> >>>>   157 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
> >>>>       |                                                       ^
> >>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_init’:
> >>>> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_init’:
> >>>> drivers/staging/media/tegra/tegra-vi.c:213:51: error: ‘struct host1x_client’ has no member named ‘host’
> >>>>   213 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
> >>>>       |                                                   ^~
> >>>> drivers/staging/media/tegra/tegra-csi.c:259:51: error: ‘struct host1x_client’ has no member named ‘host’
> >>>>   259 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
> >>>>       |                                                   ^~
> >>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_exit’:
> >>>> drivers/staging/media/tegra/tegra-vi.c:246:51: error: ‘struct host1x_client’ has no member named ‘host’
> >>>>   246 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
> >>>>       |                                                   ^~
> >>>> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_exit’:
> >>>> drivers/staging/media/tegra/tegra-csi.c:286:51: error: ‘struct host1x_client’ has no member named ‘host’
> >>>>   286 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
> >>>>       |                                                   ^~
> >>>>
> >>>> And indeed, struct host1x_client as defined in include/linux/host1x.h doesn't
> >>>> have a 'host' field.
> >>>>
> >>>> Does this series depend on another patch that's not yet in mainline?
> >>>
> >>> Sowjanya's been working on top of linux-next, so, yes, this patch
> >>> depends on a change that's been merged into the DRM tree for v5.6-rc1.
> >>>
> >>> Thierry
> >>>
> >>
> >> Is there a specific linux-next tag that works? I tried next-20200131 but that
> >> failed to boot. Same problem with the mainline repo since the host1x patches
> >> were merged yesterday. It compiles fine, but the boot just stops. Or am I
> >> missing some kernel config that is now important to have?
> > 
> > linux-next and mainline are currently regressing on Tegra210 (and some
> > Tegra124) boards. I just sent out a series that fixes the regression for
> > me:
> > 
> > 	http://patchwork.ozlabs.org/project/linux-tegra/list/?series=156215
> > 
> > Please test if this works for you. If so, I'll send this to Dave as soon
> > as possible.
> 
> I'll try it on Tuesday as I don't have access to the Jetson TX1 until then. It
> looks promising since I think that the last message I saw was a PM message.

Great. My local testing on Jetson Nano confirms that this fixes boot on
top of linux-next and I've also run it through our internal test farm
with success. I'll push this to my drm/tegra/for-next branch, so it
should show up in linux-next on Monday.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-31 17:03       ` Thierry Reding
  2020-01-31 17:37         ` Hans Verkuil
@ 2020-02-04  9:50         ` Hans Verkuil
  1 sibling, 0 replies; 55+ messages in thread
From: Hans Verkuil @ 2020-02-04  9:50 UTC (permalink / raw)
  To: Thierry Reding
  Cc: Sowjanya Komatineni, jonathanh, frankc, linux-media, devicetree,
	linux-clk, linux-tegra, linux-kernel

On 1/31/20 6:03 PM, Thierry Reding wrote:
> On Fri, Jan 31, 2020 at 03:29:52PM +0100, Hans Verkuil wrote:
>> On 1/30/20 4:42 PM, Thierry Reding wrote:
>>> On Thu, Jan 30, 2020 at 03:41:50PM +0100, Hans Verkuil wrote:
>>>> Hi Sowjanya,
>>>>
>>>> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
>>>>> This series adds Tegra210 VI and CSI driver for built-in test pattern
>>>>> generator (TPG) capture.
>>>>>
>>>>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
>>>>> CSI port is one-to-one mapped to VI channel for video capture.
>>>>>
>>>>> This series has TPG support only where it creates hard media links
>>>>> between CSI subdevice and VI video device without device graphs.
>>>>>
>>>>> v4l2-compliance results are available below the patch diff.
>>>>>
>>>>> [v0]:	Includes,
>>>>> 	- Adds CSI TPG clock to Tegra210 clock driver
>>>>> 	- Host1x video driver with VI and CSI clients.
>>>>> 	- Support for Tegra210 only.
>>>>> 	- VI CSI TPG support with hard media links in driver.
>>>>> 	- Video formats supported by Tegra210 VI
>>>>> 	- CSI TPG supported video formats
>>>>
>>>> I'm trying to compile this patch series using the media_tree master
>>>> branch (https://git.linuxtv.org//media_tree.git), but it fails:
>>>>
>>>> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_queue_setup’:
>>>> drivers/staging/media/tegra/tegra-channel.c:71:15: warning: unused variable ‘count’ [-Wunused-variable]
>>>>    71 |  unsigned int count = *nbuffers;
>>>>       |               ^~~~~
>>>> drivers/staging/media/tegra/tegra-channel.c: In function ‘tegra_channel_init’:
>>>> drivers/staging/media/tegra/tegra-channel.c:518:55: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   518 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>>>>       |                                                       ^
>>>> make[4]: *** [scripts/Makefile.build:265: drivers/staging/media/tegra/tegra-channel.o] Error 1
>>>> make[4]: *** Waiting for unfinished jobs....
>>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_tpg_graph_init’:
>>>> drivers/staging/media/tegra/tegra-vi.c:157:55: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   157 |  struct tegra_camera *cam = dev_get_drvdata(vi->client.host);
>>>>       |                                                       ^
>>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_init’:
>>>> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_init’:
>>>> drivers/staging/media/tegra/tegra-vi.c:213:51: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   213 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>>>       |                                                   ^~
>>>> drivers/staging/media/tegra/tegra-csi.c:259:51: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   259 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>>>       |                                                   ^~
>>>> drivers/staging/media/tegra/tegra-vi.c: In function ‘tegra_vi_exit’:
>>>> drivers/staging/media/tegra/tegra-vi.c:246:51: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   246 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>>>       |                                                   ^~
>>>> drivers/staging/media/tegra/tegra-csi.c: In function ‘tegra_csi_exit’:
>>>> drivers/staging/media/tegra/tegra-csi.c:286:51: error: ‘struct host1x_client’ has no member named ‘host’
>>>>   286 |  struct tegra_camera *cam = dev_get_drvdata(client->host);
>>>>       |                                                   ^~
>>>>
>>>> And indeed, struct host1x_client as defined in include/linux/host1x.h doesn't
>>>> have a 'host' field.
>>>>
>>>> Does this series depend on another patch that's not yet in mainline?
>>>
>>> Sowjanya's been working on top of linux-next, so, yes, this patch
>>> depends on a change that's been merged into the DRM tree for v5.6-rc1.
>>>
>>> Thierry
>>>
>>
>> Is there a specific linux-next tag that works? I tried next-20200131 but that
>> failed to boot. Same problem with the mainline repo since the host1x patches
>> were merged yesterday. It compiles fine, but the boot just stops. Or am I
>> missing some kernel config that is now important to have?
> 
> linux-next and mainline are currently regressing on Tegra210 (and some
> Tegra124) boards. I just sent out a series that fixes the regression for
> me:
> 
> 	http://patchwork.ozlabs.org/project/linux-tegra/list/?series=156215
> 
> Please test if this works for you. If so, I'll send this to Dave as soon
> as possible.

Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Thank you, now it boots on mainline + this series + the new VI/CSI driver.

Regards,

	Hans

> 
> Thierry
> 


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-01-28 18:23 [RFC PATCH v1 0/5] Add Tegra driver for video capture Sowjanya Komatineni
                   ` (5 preceding siblings ...)
  2020-01-30 14:41 ` [RFC PATCH v1 0/5] Add Tegra driver for video capture Hans Verkuil
@ 2020-02-04 12:53 ` Hans Verkuil
  2020-02-04 16:42   ` Sowjanya Komatineni
  6 siblings, 1 reply; 55+ messages in thread
From: Hans Verkuil @ 2020-02-04 12:53 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
> This series adds Tegra210 VI and CSI driver for built-in test pattern
> generator (TPG) capture.
> 
> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
> CSI port is one-to-one mapped to VI channel for video capture.
> 
> This series has TPG support only where it creates hard media links
> between CSI subdevice and VI video device without device graphs.
> 
> v4l2-compliance results are available below the patch diff.
> 
> [v0]:	Includes,
> 	- Adds CSI TPG clock to Tegra210 clock driver
> 	- Host1x video driver with VI and CSI clients.
> 	- Support for Tegra210 only.
> 	- VI CSI TPG support with hard media links in driver.
> 	- Video formats supported by Tegra210 VI
> 	- CSI TPG supported video formats
> 
> 
> Sowjanya Komatineni (5):
>   dt-bindings: clock: tegra: Add clk id for CSI TPG clock
>   clk: tegra: Add Tegra210 CSI TPG clock gate
>   dt-binding: tegra: Add VI and CSI bindings
>   media: tegra: Add Tegra Video input driver for Tegra210
>   arm64: tegra: Add Tegra VI CSI suppport in device tree
> 
>  .../display/tegra/nvidia,tegra20-host1x.txt        |  10 +-
>  arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi     |   8 +
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  31 +-
>  drivers/clk/tegra/clk-tegra210.c                   |   7 +
>  drivers/staging/media/Kconfig                      |   2 +
>  drivers/staging/media/Makefile                     |   1 +
>  drivers/staging/media/tegra/Kconfig                |  12 +
>  drivers/staging/media/tegra/Makefile               |  11 +
>  drivers/staging/media/tegra/TODO                   |  10 +
>  drivers/staging/media/tegra/csi.h                  | 111 ++++
>  drivers/staging/media/tegra/csi2_fops.c            | 335 +++++++++++
>  drivers/staging/media/tegra/csi2_fops.h            |  15 +
>  drivers/staging/media/tegra/host1x-video.c         | 120 ++++
>  drivers/staging/media/tegra/host1x-video.h         |  33 ++
>  drivers/staging/media/tegra/mc_common.h            | 131 +++++
>  drivers/staging/media/tegra/tegra-channel.c        | 628 +++++++++++++++++++++
>  drivers/staging/media/tegra/tegra-core.c           | 111 ++++
>  drivers/staging/media/tegra/tegra-core.h           | 125 ++++
>  drivers/staging/media/tegra/tegra-csi.c            | 380 +++++++++++++
>  drivers/staging/media/tegra/tegra-vi.c             | 351 ++++++++++++
>  drivers/staging/media/tegra/tegra-vi.h             | 101 ++++
>  drivers/staging/media/tegra/vi2_fops.c             | 364 ++++++++++++
>  drivers/staging/media/tegra/vi2_fops.h             |  15 +
>  drivers/staging/media/tegra/vi2_formats.h          | 119 ++++
>  drivers/staging/media/tegra/vi2_registers.h        | 194 +++++++
>  include/dt-bindings/clock/tegra210-car.h           |   2 +-
>  26 files changed, 3224 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/staging/media/tegra/Kconfig
>  create mode 100644 drivers/staging/media/tegra/Makefile
>  create mode 100644 drivers/staging/media/tegra/TODO
>  create mode 100644 drivers/staging/media/tegra/csi.h
>  create mode 100644 drivers/staging/media/tegra/csi2_fops.c
>  create mode 100644 drivers/staging/media/tegra/csi2_fops.h
>  create mode 100644 drivers/staging/media/tegra/host1x-video.c
>  create mode 100644 drivers/staging/media/tegra/host1x-video.h
>  create mode 100644 drivers/staging/media/tegra/mc_common.h
>  create mode 100644 drivers/staging/media/tegra/tegra-channel.c
>  create mode 100644 drivers/staging/media/tegra/tegra-core.c
>  create mode 100644 drivers/staging/media/tegra/tegra-core.h
>  create mode 100644 drivers/staging/media/tegra/tegra-csi.c
>  create mode 100644 drivers/staging/media/tegra/tegra-vi.c
>  create mode 100644 drivers/staging/media/tegra/tegra-vi.h
>  create mode 100644 drivers/staging/media/tegra/vi2_fops.c
>  create mode 100644 drivers/staging/media/tegra/vi2_fops.h
>  create mode 100644 drivers/staging/media/tegra/vi2_formats.h
>  create mode 100644 drivers/staging/media/tegra/vi2_registers.h
> 
> 
> v4l2-compliance SHA: e7402fb758fd106955c3b7d5a5e961d1cb606f4a, 32 bits, 32-bit time_t
> 
> Compliance test for tegra-video device /dev/video0:

Since this driver creates a /dev/media0 device you should test with:

v4l2-compliance -m0 -s10: that tests everything found in the media topology.

It finds a few issues in the media topology itself:

----------------------------------------------------------------------------
$ v4l2-compliance -M0
v4l2-compliance SHA: 5af0730d06247a2de487abf2e00e70b156f1fb82, 64 bits, 64-bit time_t

Compliance test for host1x_video device /dev/media0:

Media Driver Info:
        Driver name      : host1x_video
        Model            : NVIDIA Tegra Video Input Device
        Serial           :
        Bus info         :
        Media version    : 5.5.0
        Hardware revision: 0x00000003 (3)
        Driver version   : 5.5.0

Required ioctls:
                warn: v4l2-test-media.cpp(52): empty bus_info
        test MEDIA_IOC_DEVICE_INFO: OK

Allow for multiple opens:
        test second /dev/media0 open: OK
                warn: v4l2-test-media.cpp(52): empty bus_info
        test MEDIA_IOC_DEVICE_INFO: OK
        test for unlimited opens: OK

Media Controller ioctls:
                fail: v4l2-test-media.cpp(117): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
                fail: v4l2-test-media.cpp(203): checkFunction(ent.function, true)
        test MEDIA_IOC_G_TOPOLOGY: FAIL
                fail: v4l2-test-media.cpp(390): num_data_links != num_links
        test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
        test MEDIA_IOC_SETUP_LINK: OK
        test invalid ioctls: OK

Total for host1x_video device /dev/media0: 8, Succeeded: 6, Failed: 2, Warnings: 2
----------------------------------------------------------------------------

Note: the -M0 option tests just /dev/media0 without testing any of the devices
mentioned in the topology. Use -m0 for that.

I see a lot of spam in the kernel log:

[  484.362145] tegra-vi 54080000.vi: TPG mode is set to Black/White Direct Mode
[  486.147937] tegra-csi 54080838.csi: using Tegra default WIDTH X HEIGHT (1920x1080)
[  486.155499] tegra-csi 54080838.csi: using Tegra default RAW10 video format
[  486.162403] tegra-csi 54080838.csi: using Tegra default RAW10 video format

Change that to dev_dbg or delete altogether.

I also noticed that changing the test pattern while streaming did not seem to have
any effect until I stop and restart streaming. Is that a limitation of the HW or of
the driver?

Note that the RGB pixelformat appears to be incorrect: it is set to RGB32 but it
should be BGR32. Actually, it should be XBGR32 since there is no alpha channel
present (I think). RGB32 and BGR32 are deprecated in favor of RGBX/A and X/ABGR.

Regards,

	Hans

> 
> Driver Info:
>         Driver name      : tegra-video
>         Card type        : 54080000.vi-output-0
>         Bus info         : platform:54080000.vi:0
>         Driver version   : 5.5.0
>         Capabilities     : 0x85200001
>                 Video Capture
>                 Read/Write
>                 Streaming
>                 Extended Pix Format
>                 Device Capabilities
>         Device Caps      : 0x05200001
>                 Video Capture
>                 Read/Write
>                 Streaming
>                 Extended Pix Format
> Media Driver Info:
>         Driver name      : host1x_video
>         Model            : NVIDIA Tegra Video Input Device
>         Serial           :
>         Bus info         :
>         Media version    : 5.5.0
>         Hardware revision: 0x00000003 (3)
>         Driver version   : 5.5.0
> Interface Info:
>         ID               : 0x03000003
>         Type             : V4L Video
> Entity Info:
>         ID               : 0x00000001 (1)
>         Name             : 54080000.vi-output-0
>         Function         : V4L2 I/O
>         Pad 0x01000002   : 0: Sink
>           Link 0x0200001b: from remote pad 0x100001a of entity 'tpg-0': Data, Enabled
> 
> Required ioctls:
>         test MC information (see 'Media Driver Info' above): OK
>         test VIDIOC_QUERYCAP: OK
> 
> Allow for multiple opens:
>         test second /dev/video0 open: OK
>         test VIDIOC_QUERYCAP: OK
>         test VIDIOC_G/S_PRIORITY: OK
>         test for unlimited opens: OK
> 
>         test invalid ioctls: OK
> Debug ioctls:
>         test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>         test VIDIOC_LOG_STATUS: OK (Not Supported)
> 
> Input ioctls:
>         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>         test VIDIOC_ENUMAUDIO: OK (Not Supported)
>         test VIDIOC_G/S/ENUMINPUT: OK
>         test VIDIOC_G/S_AUDIO: OK (Not Supported)
>         Inputs: 1 Audio Inputs: 0 Tuners: 0
> 
> Output ioctls:
>         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>         Outputs: 0 Audio Outputs: 0 Modulators: 0
> 
> Input/Output configuration ioctls:
>         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>         test VIDIOC_G/S_EDID: OK (Not Supported)
> 
> Control ioctls (Input 0):
>         test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>         test VIDIOC_QUERYCTRL: OK
>         test VIDIOC_G/S_CTRL: OK
>         test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>         test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>         test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>         Standard Controls: 2 Private Controls: 0
> 
> Format ioctls (Input 0):
>         test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>         test VIDIOC_G/S_PARM: OK (Not Supported)
>         test VIDIOC_G_FBUF: OK (Not Supported)
>         test VIDIOC_G_FMT: OK
>         test VIDIOC_TRY_FMT: OK
>         test VIDIOC_S_FMT: OK
>         test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>         test Cropping: OK (Not Supported)
>         test Composing: OK (Not Supported)
>         test Scaling: OK (Not Supported)
> 
> Codec ioctls (Input 0):
>         test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>         test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>         test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> 
> Buffer ioctls (Input 0):
>         test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>         test VIDIOC_EXPBUF: OK
>         test Requests: OK (Not Supported)
> 
> Test input 0:
> 
> Streaming ioctls:
>         test read/write: OK
>         test blocking wait: OK
>         test MMAP (no poll): OK
>         test MMAP (select): OK
>         test MMAP (epoll): OK
>         test USERPTR (no poll): OK (Not Supported)
>         test USERPTR (select): OK (Not Supported)
>         test DMABUF: Cannot test, specify --expbuf-device
> 
> Total for tegra-video device /dev/video0: 53, Succeeded: 53, Failed: 0, Warnings: 0
> 


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-02-04 12:53 ` Hans Verkuil
@ 2020-02-04 16:42   ` Sowjanya Komatineni
  2020-02-04 17:22     ` Hans Verkuil
  0 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-02-04 16:42 UTC (permalink / raw)
  To: Hans Verkuil, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 2/4/20 4:53 AM, Hans Verkuil wrote:
> External email: Use caution opening links or attachments
>
>
> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
>> This series adds Tegra210 VI and CSI driver for built-in test pattern
>> generator (TPG) capture.
>>
>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
>> CSI port is one-to-one mapped to VI channel for video capture.
>>
>> This series has TPG support only where it creates hard media links
>> between CSI subdevice and VI video device without device graphs.
>>
>> v4l2-compliance results are available below the patch diff.
>>
>> [v0]: Includes,
>>        - Adds CSI TPG clock to Tegra210 clock driver
>>        - Host1x video driver with VI and CSI clients.
>>        - Support for Tegra210 only.
>>        - VI CSI TPG support with hard media links in driver.
>>        - Video formats supported by Tegra210 VI
>>        - CSI TPG supported video formats
>>
>>
>> Sowjanya Komatineni (5):
>>    dt-bindings: clock: tegra: Add clk id for CSI TPG clock
>>    clk: tegra: Add Tegra210 CSI TPG clock gate
>>    dt-binding: tegra: Add VI and CSI bindings
>>    media: tegra: Add Tegra Video input driver for Tegra210
>>    arm64: tegra: Add Tegra VI CSI suppport in device tree
>>
>>   .../display/tegra/nvidia,tegra20-host1x.txt        |  10 +-
>>   arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi     |   8 +
>>   arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  31 +-
>>   drivers/clk/tegra/clk-tegra210.c                   |   7 +
>>   drivers/staging/media/Kconfig                      |   2 +
>>   drivers/staging/media/Makefile                     |   1 +
>>   drivers/staging/media/tegra/Kconfig                |  12 +
>>   drivers/staging/media/tegra/Makefile               |  11 +
>>   drivers/staging/media/tegra/TODO                   |  10 +
>>   drivers/staging/media/tegra/csi.h                  | 111 ++++
>>   drivers/staging/media/tegra/csi2_fops.c            | 335 +++++++++++
>>   drivers/staging/media/tegra/csi2_fops.h            |  15 +
>>   drivers/staging/media/tegra/host1x-video.c         | 120 ++++
>>   drivers/staging/media/tegra/host1x-video.h         |  33 ++
>>   drivers/staging/media/tegra/mc_common.h            | 131 +++++
>>   drivers/staging/media/tegra/tegra-channel.c        | 628 +++++++++++++++++++++
>>   drivers/staging/media/tegra/tegra-core.c           | 111 ++++
>>   drivers/staging/media/tegra/tegra-core.h           | 125 ++++
>>   drivers/staging/media/tegra/tegra-csi.c            | 380 +++++++++++++
>>   drivers/staging/media/tegra/tegra-vi.c             | 351 ++++++++++++
>>   drivers/staging/media/tegra/tegra-vi.h             | 101 ++++
>>   drivers/staging/media/tegra/vi2_fops.c             | 364 ++++++++++++
>>   drivers/staging/media/tegra/vi2_fops.h             |  15 +
>>   drivers/staging/media/tegra/vi2_formats.h          | 119 ++++
>>   drivers/staging/media/tegra/vi2_registers.h        | 194 +++++++
>>   include/dt-bindings/clock/tegra210-car.h           |   2 +-
>>   26 files changed, 3224 insertions(+), 3 deletions(-)
>>   create mode 100644 drivers/staging/media/tegra/Kconfig
>>   create mode 100644 drivers/staging/media/tegra/Makefile
>>   create mode 100644 drivers/staging/media/tegra/TODO
>>   create mode 100644 drivers/staging/media/tegra/csi.h
>>   create mode 100644 drivers/staging/media/tegra/csi2_fops.c
>>   create mode 100644 drivers/staging/media/tegra/csi2_fops.h
>>   create mode 100644 drivers/staging/media/tegra/host1x-video.c
>>   create mode 100644 drivers/staging/media/tegra/host1x-video.h
>>   create mode 100644 drivers/staging/media/tegra/mc_common.h
>>   create mode 100644 drivers/staging/media/tegra/tegra-channel.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-core.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-core.h
>>   create mode 100644 drivers/staging/media/tegra/tegra-csi.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-vi.c
>>   create mode 100644 drivers/staging/media/tegra/tegra-vi.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_fops.c
>>   create mode 100644 drivers/staging/media/tegra/vi2_fops.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_formats.h
>>   create mode 100644 drivers/staging/media/tegra/vi2_registers.h
>>
>>
>> v4l2-compliance SHA: e7402fb758fd106955c3b7d5a5e961d1cb606f4a, 32 bits, 32-bit time_t
>>
>> Compliance test for tegra-video device /dev/video0:
> Since this driver creates a /dev/media0 device you should test with:
>
> v4l2-compliance -m0 -s10: that tests everything found in the media topology.
>
> It finds a few issues in the media topology itself:
>
> ----------------------------------------------------------------------------
> $ v4l2-compliance -M0
> v4l2-compliance SHA: 5af0730d06247a2de487abf2e00e70b156f1fb82, 64 bits, 64-bit time_t
>
> Compliance test for host1x_video device /dev/media0:
>
> Media Driver Info:
>          Driver name      : host1x_video
>          Model            : NVIDIA Tegra Video Input Device
>          Serial           :
>          Bus info         :
>          Media version    : 5.5.0
>          Hardware revision: 0x00000003 (3)
>          Driver version   : 5.5.0
>
> Required ioctls:
>                  warn: v4l2-test-media.cpp(52): empty bus_info
>          test MEDIA_IOC_DEVICE_INFO: OK
>
> Allow for multiple opens:
>          test second /dev/media0 open: OK
>                  warn: v4l2-test-media.cpp(52): empty bus_info
>          test MEDIA_IOC_DEVICE_INFO: OK
>          test for unlimited opens: OK
>
> Media Controller ioctls:
>                  fail: v4l2-test-media.cpp(117): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
>                  fail: v4l2-test-media.cpp(203): checkFunction(ent.function, true)
>          test MEDIA_IOC_G_TOPOLOGY: FAIL
>                  fail: v4l2-test-media.cpp(390): num_data_links != num_links
>          test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
>          test MEDIA_IOC_SETUP_LINK: OK
>          test invalid ioctls: OK
>
> Total for host1x_video device /dev/media0: 8, Succeeded: 6, Failed: 2, Warnings: 2
> ----------------------------------------------------------------------------
>
> Note: the -M0 option tests just /dev/media0 without testing any of the devices
> mentioned in the topology. Use -m0 for that.
OK
> I see a lot of spam in the kernel log:
>
> [  484.362145] tegra-vi 54080000.vi: TPG mode is set to Black/White Direct Mode
> [  486.147937] tegra-csi 54080838.csi: using Tegra default WIDTH X HEIGHT (1920x1080)
> [  486.155499] tegra-csi 54080838.csi: using Tegra default RAW10 video format
> [  486.162403] tegra-csi 54080838.csi: using Tegra default RAW10 video format
>
> Change that to dev_dbg or delete altogether.

ok, removed TPG mode message in v2.

Other above messages are to log using default format when requested 
format is not supported by TPG mode.

Will change them to dev_dbg.

>
> I also noticed that changing the test pattern while streaming did not seem to have
> any effect until I stop and restart streaming. Is that a limitation of the HW or of
> the driver?

Do you mean changing test pattern mode of different channel while other 
channels are streaming?

In v1, pg mode from handler is stored in vi which is common for all 
channels.

So, v2 has change to use channel specific pg mode rather than common 
mode for all channels.

>
> Note that the RGB pixelformat appears to be incorrect: it is set to RGB32 but it
> should be BGR32. Actually, it should be XBGR32 since there is no alpha channel
> present (I think). RGB32 and BGR32 are deprecated in favor of RGBX/A and X/ABGR.
>
> Regards,
>
>          Hans
Will fix it.
>> Driver Info:
>>          Driver name      : tegra-video
>>          Card type        : 54080000.vi-output-0
>>          Bus info         : platform:54080000.vi:0
>>          Driver version   : 5.5.0
>>          Capabilities     : 0x85200001
>>                  Video Capture
>>                  Read/Write
>>                  Streaming
>>                  Extended Pix Format
>>                  Device Capabilities
>>          Device Caps      : 0x05200001
>>                  Video Capture
>>                  Read/Write
>>                  Streaming
>>                  Extended Pix Format
>> Media Driver Info:
>>          Driver name      : host1x_video
>>          Model            : NVIDIA Tegra Video Input Device
>>          Serial           :
>>          Bus info         :
>>          Media version    : 5.5.0
>>          Hardware revision: 0x00000003 (3)
>>          Driver version   : 5.5.0
>> Interface Info:
>>          ID               : 0x03000003
>>          Type             : V4L Video
>> Entity Info:
>>          ID               : 0x00000001 (1)
>>          Name             : 54080000.vi-output-0
>>          Function         : V4L2 I/O
>>          Pad 0x01000002   : 0: Sink
>>            Link 0x0200001b: from remote pad 0x100001a of entity 'tpg-0': Data, Enabled
>>
>> Required ioctls:
>>          test MC information (see 'Media Driver Info' above): OK
>>          test VIDIOC_QUERYCAP: OK
>>
>> Allow for multiple opens:
>>          test second /dev/video0 open: OK
>>          test VIDIOC_QUERYCAP: OK
>>          test VIDIOC_G/S_PRIORITY: OK
>>          test for unlimited opens: OK
>>
>>          test invalid ioctls: OK
>> Debug ioctls:
>>          test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>          test VIDIOC_LOG_STATUS: OK (Not Supported)
>>
>> Input ioctls:
>>          test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>          test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>          test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>          test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>          test VIDIOC_G/S/ENUMINPUT: OK
>>          test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>          Inputs: 1 Audio Inputs: 0 Tuners: 0
>>
>> Output ioctls:
>>          test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>          test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>          test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>          test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>          test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>          Outputs: 0 Audio Outputs: 0 Modulators: 0
>>
>> Input/Output configuration ioctls:
>>          test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>          test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>          test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>          test VIDIOC_G/S_EDID: OK (Not Supported)
>>
>> Control ioctls (Input 0):
>>          test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>          test VIDIOC_QUERYCTRL: OK
>>          test VIDIOC_G/S_CTRL: OK
>>          test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>          test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>          test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>          Standard Controls: 2 Private Controls: 0
>>
>> Format ioctls (Input 0):
>>          test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>          test VIDIOC_G/S_PARM: OK (Not Supported)
>>          test VIDIOC_G_FBUF: OK (Not Supported)
>>          test VIDIOC_G_FMT: OK
>>          test VIDIOC_TRY_FMT: OK
>>          test VIDIOC_S_FMT: OK
>>          test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>          test Cropping: OK (Not Supported)
>>          test Composing: OK (Not Supported)
>>          test Scaling: OK (Not Supported)
>>
>> Codec ioctls (Input 0):
>>          test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>          test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>          test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>
>> Buffer ioctls (Input 0):
>>          test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>          test VIDIOC_EXPBUF: OK
>>          test Requests: OK (Not Supported)
>>
>> Test input 0:
>>
>> Streaming ioctls:
>>          test read/write: OK
>>          test blocking wait: OK
>>          test MMAP (no poll): OK
>>          test MMAP (select): OK
>>          test MMAP (epoll): OK
>>          test USERPTR (no poll): OK (Not Supported)
>>          test USERPTR (select): OK (Not Supported)
>>          test DMABUF: Cannot test, specify --expbuf-device
>>
>> Total for tegra-video device /dev/video0: 53, Succeeded: 53, Failed: 0, Warnings: 0
>>

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-02-04 16:42   ` Sowjanya Komatineni
@ 2020-02-04 17:22     ` Hans Verkuil
  2020-02-04 19:02       ` Sowjanya Komatineni
  0 siblings, 1 reply; 55+ messages in thread
From: Hans Verkuil @ 2020-02-04 17:22 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

On 2/4/20 5:42 PM, Sowjanya Komatineni wrote:
> 
> On 2/4/20 4:53 AM, Hans Verkuil wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
>>> This series adds Tegra210 VI and CSI driver for built-in test pattern
>>> generator (TPG) capture.
>>>
>>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
>>> CSI port is one-to-one mapped to VI channel for video capture.
>>>
>>> This series has TPG support only where it creates hard media links
>>> between CSI subdevice and VI video device without device graphs.
>>>
>>> v4l2-compliance results are available below the patch diff.
>>>
>>> [v0]: Includes,
>>>        - Adds CSI TPG clock to Tegra210 clock driver
>>>        - Host1x video driver with VI and CSI clients.
>>>        - Support for Tegra210 only.
>>>        - VI CSI TPG support with hard media links in driver.
>>>        - Video formats supported by Tegra210 VI
>>>        - CSI TPG supported video formats
>>>
>>>
>>> Sowjanya Komatineni (5):
>>>    dt-bindings: clock: tegra: Add clk id for CSI TPG clock
>>>    clk: tegra: Add Tegra210 CSI TPG clock gate
>>>    dt-binding: tegra: Add VI and CSI bindings
>>>    media: tegra: Add Tegra Video input driver for Tegra210
>>>    arm64: tegra: Add Tegra VI CSI suppport in device tree
>>>
>>>   .../display/tegra/nvidia,tegra20-host1x.txt        |  10 +-
>>>   arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi     |   8 +
>>>   arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  31 +-
>>>   drivers/clk/tegra/clk-tegra210.c                   |   7 +
>>>   drivers/staging/media/Kconfig                      |   2 +
>>>   drivers/staging/media/Makefile                     |   1 +
>>>   drivers/staging/media/tegra/Kconfig                |  12 +
>>>   drivers/staging/media/tegra/Makefile               |  11 +
>>>   drivers/staging/media/tegra/TODO                   |  10 +
>>>   drivers/staging/media/tegra/csi.h                  | 111 ++++
>>>   drivers/staging/media/tegra/csi2_fops.c            | 335 +++++++++++
>>>   drivers/staging/media/tegra/csi2_fops.h            |  15 +
>>>   drivers/staging/media/tegra/host1x-video.c         | 120 ++++
>>>   drivers/staging/media/tegra/host1x-video.h         |  33 ++
>>>   drivers/staging/media/tegra/mc_common.h            | 131 +++++
>>>   drivers/staging/media/tegra/tegra-channel.c        | 628 +++++++++++++++++++++
>>>   drivers/staging/media/tegra/tegra-core.c           | 111 ++++
>>>   drivers/staging/media/tegra/tegra-core.h           | 125 ++++
>>>   drivers/staging/media/tegra/tegra-csi.c            | 380 +++++++++++++
>>>   drivers/staging/media/tegra/tegra-vi.c             | 351 ++++++++++++
>>>   drivers/staging/media/tegra/tegra-vi.h             | 101 ++++
>>>   drivers/staging/media/tegra/vi2_fops.c             | 364 ++++++++++++
>>>   drivers/staging/media/tegra/vi2_fops.h             |  15 +
>>>   drivers/staging/media/tegra/vi2_formats.h          | 119 ++++
>>>   drivers/staging/media/tegra/vi2_registers.h        | 194 +++++++
>>>   include/dt-bindings/clock/tegra210-car.h           |   2 +-
>>>   26 files changed, 3224 insertions(+), 3 deletions(-)
>>>   create mode 100644 drivers/staging/media/tegra/Kconfig
>>>   create mode 100644 drivers/staging/media/tegra/Makefile
>>>   create mode 100644 drivers/staging/media/tegra/TODO
>>>   create mode 100644 drivers/staging/media/tegra/csi.h
>>>   create mode 100644 drivers/staging/media/tegra/csi2_fops.c
>>>   create mode 100644 drivers/staging/media/tegra/csi2_fops.h
>>>   create mode 100644 drivers/staging/media/tegra/host1x-video.c
>>>   create mode 100644 drivers/staging/media/tegra/host1x-video.h
>>>   create mode 100644 drivers/staging/media/tegra/mc_common.h
>>>   create mode 100644 drivers/staging/media/tegra/tegra-channel.c
>>>   create mode 100644 drivers/staging/media/tegra/tegra-core.c
>>>   create mode 100644 drivers/staging/media/tegra/tegra-core.h
>>>   create mode 100644 drivers/staging/media/tegra/tegra-csi.c
>>>   create mode 100644 drivers/staging/media/tegra/tegra-vi.c
>>>   create mode 100644 drivers/staging/media/tegra/tegra-vi.h
>>>   create mode 100644 drivers/staging/media/tegra/vi2_fops.c
>>>   create mode 100644 drivers/staging/media/tegra/vi2_fops.h
>>>   create mode 100644 drivers/staging/media/tegra/vi2_formats.h
>>>   create mode 100644 drivers/staging/media/tegra/vi2_registers.h
>>>
>>>
>>> v4l2-compliance SHA: e7402fb758fd106955c3b7d5a5e961d1cb606f4a, 32 bits, 32-bit time_t
>>>
>>> Compliance test for tegra-video device /dev/video0:
>> Since this driver creates a /dev/media0 device you should test with:
>>
>> v4l2-compliance -m0 -s10: that tests everything found in the media topology.
>>
>> It finds a few issues in the media topology itself:
>>
>> ----------------------------------------------------------------------------
>> $ v4l2-compliance -M0
>> v4l2-compliance SHA: 5af0730d06247a2de487abf2e00e70b156f1fb82, 64 bits, 64-bit time_t
>>
>> Compliance test for host1x_video device /dev/media0:
>>
>> Media Driver Info:
>>          Driver name      : host1x_video
>>          Model            : NVIDIA Tegra Video Input Device
>>          Serial           :
>>          Bus info         :
>>          Media version    : 5.5.0
>>          Hardware revision: 0x00000003 (3)
>>          Driver version   : 5.5.0
>>
>> Required ioctls:
>>                  warn: v4l2-test-media.cpp(52): empty bus_info
>>          test MEDIA_IOC_DEVICE_INFO: OK
>>
>> Allow for multiple opens:
>>          test second /dev/media0 open: OK
>>                  warn: v4l2-test-media.cpp(52): empty bus_info
>>          test MEDIA_IOC_DEVICE_INFO: OK
>>          test for unlimited opens: OK
>>
>> Media Controller ioctls:
>>                  fail: v4l2-test-media.cpp(117): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
>>                  fail: v4l2-test-media.cpp(203): checkFunction(ent.function, true)
>>          test MEDIA_IOC_G_TOPOLOGY: FAIL
>>                  fail: v4l2-test-media.cpp(390): num_data_links != num_links
>>          test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
>>          test MEDIA_IOC_SETUP_LINK: OK
>>          test invalid ioctls: OK
>>
>> Total for host1x_video device /dev/media0: 8, Succeeded: 6, Failed: 2, Warnings: 2
>> ----------------------------------------------------------------------------
>>
>> Note: the -M0 option tests just /dev/media0 without testing any of the devices
>> mentioned in the topology. Use -m0 for that.
> OK
>> I see a lot of spam in the kernel log:
>>
>> [  484.362145] tegra-vi 54080000.vi: TPG mode is set to Black/White Direct Mode
>> [  486.147937] tegra-csi 54080838.csi: using Tegra default WIDTH X HEIGHT (1920x1080)
>> [  486.155499] tegra-csi 54080838.csi: using Tegra default RAW10 video format
>> [  486.162403] tegra-csi 54080838.csi: using Tegra default RAW10 video format
>>
>> Change that to dev_dbg or delete altogether.
> 
> ok, removed TPG mode message in v2.
> 
> Other above messages are to log using default format when requested 
> format is not supported by TPG mode.
> 
> Will change them to dev_dbg.
> 
>>
>> I also noticed that changing the test pattern while streaming did not seem to have
>> any effect until I stop and restart streaming. Is that a limitation of the HW or of
>> the driver?
> 
> Do you mean changing test pattern mode of different channel while other 
> channels are streaming?

No, from the same channel. E.g. v4l2-ctl --stream-mmap, then do from another
console 'v4l2-ctl -c test-pattern=1'.

It depends on the hardware whether or not you can change the test pattern
while streaming. But it is nice for testing if this is possible.

> 
> In v1, pg mode from handler is stored in vi which is common for all 
> channels.
> 
> So, v2 has change to use channel specific pg mode rather than common 
> mode for all channels.

That sounds better. You want independent test patterns for each channel
if possible.

Regards,

	Hans

> 
>>
>> Note that the RGB pixelformat appears to be incorrect: it is set to RGB32 but it
>> should be BGR32. Actually, it should be XBGR32 since there is no alpha channel
>> present (I think). RGB32 and BGR32 are deprecated in favor of RGBX/A and X/ABGR.
>>
>> Regards,
>>
>>          Hans
> Will fix it.
>>> Driver Info:
>>>          Driver name      : tegra-video
>>>          Card type        : 54080000.vi-output-0
>>>          Bus info         : platform:54080000.vi:0
>>>          Driver version   : 5.5.0
>>>          Capabilities     : 0x85200001
>>>                  Video Capture
>>>                  Read/Write
>>>                  Streaming
>>>                  Extended Pix Format
>>>                  Device Capabilities
>>>          Device Caps      : 0x05200001
>>>                  Video Capture
>>>                  Read/Write
>>>                  Streaming
>>>                  Extended Pix Format
>>> Media Driver Info:
>>>          Driver name      : host1x_video
>>>          Model            : NVIDIA Tegra Video Input Device
>>>          Serial           :
>>>          Bus info         :
>>>          Media version    : 5.5.0
>>>          Hardware revision: 0x00000003 (3)
>>>          Driver version   : 5.5.0
>>> Interface Info:
>>>          ID               : 0x03000003
>>>          Type             : V4L Video
>>> Entity Info:
>>>          ID               : 0x00000001 (1)
>>>          Name             : 54080000.vi-output-0
>>>          Function         : V4L2 I/O
>>>          Pad 0x01000002   : 0: Sink
>>>            Link 0x0200001b: from remote pad 0x100001a of entity 'tpg-0': Data, Enabled
>>>
>>> Required ioctls:
>>>          test MC information (see 'Media Driver Info' above): OK
>>>          test VIDIOC_QUERYCAP: OK
>>>
>>> Allow for multiple opens:
>>>          test second /dev/video0 open: OK
>>>          test VIDIOC_QUERYCAP: OK
>>>          test VIDIOC_G/S_PRIORITY: OK
>>>          test for unlimited opens: OK
>>>
>>>          test invalid ioctls: OK
>>> Debug ioctls:
>>>          test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>          test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>
>>> Input ioctls:
>>>          test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>>          test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>          test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>          test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>          test VIDIOC_G/S/ENUMINPUT: OK
>>>          test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>          Inputs: 1 Audio Inputs: 0 Tuners: 0
>>>
>>> Output ioctls:
>>>          test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>          test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>          test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>          test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>          test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>          Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>
>>> Input/Output configuration ioctls:
>>>          test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>>          test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>>          test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>          test VIDIOC_G/S_EDID: OK (Not Supported)
>>>
>>> Control ioctls (Input 0):
>>>          test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>>          test VIDIOC_QUERYCTRL: OK
>>>          test VIDIOC_G/S_CTRL: OK
>>>          test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>>          test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>>          test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>          Standard Controls: 2 Private Controls: 0
>>>
>>> Format ioctls (Input 0):
>>>          test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>          test VIDIOC_G/S_PARM: OK (Not Supported)
>>>          test VIDIOC_G_FBUF: OK (Not Supported)
>>>          test VIDIOC_G_FMT: OK
>>>          test VIDIOC_TRY_FMT: OK
>>>          test VIDIOC_S_FMT: OK
>>>          test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>          test Cropping: OK (Not Supported)
>>>          test Composing: OK (Not Supported)
>>>          test Scaling: OK (Not Supported)
>>>
>>> Codec ioctls (Input 0):
>>>          test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>>          test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>          test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>
>>> Buffer ioctls (Input 0):
>>>          test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>          test VIDIOC_EXPBUF: OK
>>>          test Requests: OK (Not Supported)
>>>
>>> Test input 0:
>>>
>>> Streaming ioctls:
>>>          test read/write: OK
>>>          test blocking wait: OK
>>>          test MMAP (no poll): OK
>>>          test MMAP (select): OK
>>>          test MMAP (epoll): OK
>>>          test USERPTR (no poll): OK (Not Supported)
>>>          test USERPTR (select): OK (Not Supported)
>>>          test DMABUF: Cannot test, specify --expbuf-device
>>>
>>> Total for tegra-video device /dev/video0: 53, Succeeded: 53, Failed: 0, Warnings: 0
>>>


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-02-04 17:22     ` Hans Verkuil
@ 2020-02-04 19:02       ` Sowjanya Komatineni
  2020-02-05  7:57         ` Hans Verkuil
  0 siblings, 1 reply; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-02-04 19:02 UTC (permalink / raw)
  To: Hans Verkuil, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 2/4/20 9:22 AM, Hans Verkuil wrote:
> External email: Use caution opening links or attachments
>
>
> On 2/4/20 5:42 PM, Sowjanya Komatineni wrote:
>> On 2/4/20 4:53 AM, Hans Verkuil wrote:
>>> External email: Use caution opening links or attachments
>>>
>>>
>>> On 1/28/20 7:23 PM, Sowjanya Komatineni wrote:
>>>> This series adds Tegra210 VI and CSI driver for built-in test pattern
>>>> generator (TPG) capture.
>>>>
>>>> Tegra210 supports max 6 channels on VI and 6 ports on CSI where each
>>>> CSI port is one-to-one mapped to VI channel for video capture.
>>>>
>>>> This series has TPG support only where it creates hard media links
>>>> between CSI subdevice and VI video device without device graphs.
>>>>
>>>> v4l2-compliance results are available below the patch diff.
>>>>
>>>> [v0]: Includes,
>>>>         - Adds CSI TPG clock to Tegra210 clock driver
>>>>         - Host1x video driver with VI and CSI clients.
>>>>         - Support for Tegra210 only.
>>>>         - VI CSI TPG support with hard media links in driver.
>>>>         - Video formats supported by Tegra210 VI
>>>>         - CSI TPG supported video formats
>>>>
>>>>
>>>> Sowjanya Komatineni (5):
>>>>     dt-bindings: clock: tegra: Add clk id for CSI TPG clock
>>>>     clk: tegra: Add Tegra210 CSI TPG clock gate
>>>>     dt-binding: tegra: Add VI and CSI bindings
>>>>     media: tegra: Add Tegra Video input driver for Tegra210
>>>>     arm64: tegra: Add Tegra VI CSI suppport in device tree
>>>>
>>>>    .../display/tegra/nvidia,tegra20-host1x.txt        |  10 +-
>>>>    arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi     |   8 +
>>>>    arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  31 +-
>>>>    drivers/clk/tegra/clk-tegra210.c                   |   7 +
>>>>    drivers/staging/media/Kconfig                      |   2 +
>>>>    drivers/staging/media/Makefile                     |   1 +
>>>>    drivers/staging/media/tegra/Kconfig                |  12 +
>>>>    drivers/staging/media/tegra/Makefile               |  11 +
>>>>    drivers/staging/media/tegra/TODO                   |  10 +
>>>>    drivers/staging/media/tegra/csi.h                  | 111 ++++
>>>>    drivers/staging/media/tegra/csi2_fops.c            | 335 +++++++++++
>>>>    drivers/staging/media/tegra/csi2_fops.h            |  15 +
>>>>    drivers/staging/media/tegra/host1x-video.c         | 120 ++++
>>>>    drivers/staging/media/tegra/host1x-video.h         |  33 ++
>>>>    drivers/staging/media/tegra/mc_common.h            | 131 +++++
>>>>    drivers/staging/media/tegra/tegra-channel.c        | 628 +++++++++++++++++++++
>>>>    drivers/staging/media/tegra/tegra-core.c           | 111 ++++
>>>>    drivers/staging/media/tegra/tegra-core.h           | 125 ++++
>>>>    drivers/staging/media/tegra/tegra-csi.c            | 380 +++++++++++++
>>>>    drivers/staging/media/tegra/tegra-vi.c             | 351 ++++++++++++
>>>>    drivers/staging/media/tegra/tegra-vi.h             | 101 ++++
>>>>    drivers/staging/media/tegra/vi2_fops.c             | 364 ++++++++++++
>>>>    drivers/staging/media/tegra/vi2_fops.h             |  15 +
>>>>    drivers/staging/media/tegra/vi2_formats.h          | 119 ++++
>>>>    drivers/staging/media/tegra/vi2_registers.h        | 194 +++++++
>>>>    include/dt-bindings/clock/tegra210-car.h           |   2 +-
>>>>    26 files changed, 3224 insertions(+), 3 deletions(-)
>>>>    create mode 100644 drivers/staging/media/tegra/Kconfig
>>>>    create mode 100644 drivers/staging/media/tegra/Makefile
>>>>    create mode 100644 drivers/staging/media/tegra/TODO
>>>>    create mode 100644 drivers/staging/media/tegra/csi.h
>>>>    create mode 100644 drivers/staging/media/tegra/csi2_fops.c
>>>>    create mode 100644 drivers/staging/media/tegra/csi2_fops.h
>>>>    create mode 100644 drivers/staging/media/tegra/host1x-video.c
>>>>    create mode 100644 drivers/staging/media/tegra/host1x-video.h
>>>>    create mode 100644 drivers/staging/media/tegra/mc_common.h
>>>>    create mode 100644 drivers/staging/media/tegra/tegra-channel.c
>>>>    create mode 100644 drivers/staging/media/tegra/tegra-core.c
>>>>    create mode 100644 drivers/staging/media/tegra/tegra-core.h
>>>>    create mode 100644 drivers/staging/media/tegra/tegra-csi.c
>>>>    create mode 100644 drivers/staging/media/tegra/tegra-vi.c
>>>>    create mode 100644 drivers/staging/media/tegra/tegra-vi.h
>>>>    create mode 100644 drivers/staging/media/tegra/vi2_fops.c
>>>>    create mode 100644 drivers/staging/media/tegra/vi2_fops.h
>>>>    create mode 100644 drivers/staging/media/tegra/vi2_formats.h
>>>>    create mode 100644 drivers/staging/media/tegra/vi2_registers.h
>>>>
>>>>
>>>> v4l2-compliance SHA: e7402fb758fd106955c3b7d5a5e961d1cb606f4a, 32 bits, 32-bit time_t
>>>>
>>>> Compliance test for tegra-video device /dev/video0:
>>> Since this driver creates a /dev/media0 device you should test with:
>>>
>>> v4l2-compliance -m0 -s10: that tests everything found in the media topology.
>>>
>>> It finds a few issues in the media topology itself:
>>>
>>> ----------------------------------------------------------------------------
>>> $ v4l2-compliance -M0
>>> v4l2-compliance SHA: 5af0730d06247a2de487abf2e00e70b156f1fb82, 64 bits, 64-bit time_t
>>>
>>> Compliance test for host1x_video device /dev/media0:
>>>
>>> Media Driver Info:
>>>           Driver name      : host1x_video
>>>           Model            : NVIDIA Tegra Video Input Device
>>>           Serial           :
>>>           Bus info         :
>>>           Media version    : 5.5.0
>>>           Hardware revision: 0x00000003 (3)
>>>           Driver version   : 5.5.0
>>>
>>> Required ioctls:
>>>                   warn: v4l2-test-media.cpp(52): empty bus_info
>>>           test MEDIA_IOC_DEVICE_INFO: OK
>>>
>>> Allow for multiple opens:
>>>           test second /dev/media0 open: OK
>>>                   warn: v4l2-test-media.cpp(52): empty bus_info
>>>           test MEDIA_IOC_DEVICE_INFO: OK
>>>           test for unlimited opens: OK
>>>
>>> Media Controller ioctls:
>>>                   fail: v4l2-test-media.cpp(117): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
>>>                   fail: v4l2-test-media.cpp(203): checkFunction(ent.function, true)
>>>           test MEDIA_IOC_G_TOPOLOGY: FAIL
>>>                   fail: v4l2-test-media.cpp(390): num_data_links != num_links
>>>           test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
>>>           test MEDIA_IOC_SETUP_LINK: OK
>>>           test invalid ioctls: OK
>>>
>>> Total for host1x_video device /dev/media0: 8, Succeeded: 6, Failed: 2, Warnings: 2
>>> ----------------------------------------------------------------------------
>>>
>>> Note: the -M0 option tests just /dev/media0 without testing any of the devices
>>> mentioned in the topology. Use -m0 for that.
>> OK
>>> I see a lot of spam in the kernel log:
>>>
>>> [  484.362145] tegra-vi 54080000.vi: TPG mode is set to Black/White Direct Mode
>>> [  486.147937] tegra-csi 54080838.csi: using Tegra default WIDTH X HEIGHT (1920x1080)
>>> [  486.155499] tegra-csi 54080838.csi: using Tegra default RAW10 video format
>>> [  486.162403] tegra-csi 54080838.csi: using Tegra default RAW10 video format
>>>
>>> Change that to dev_dbg or delete altogether.
>> ok, removed TPG mode message in v2.
>>
>> Other above messages are to log using default format when requested
>> format is not supported by TPG mode.
>>
>> Will change them to dev_dbg.
>>
>>> I also noticed that changing the test pattern while streaming did not seem to have
>>> any effect until I stop and restart streaming. Is that a limitation of the HW or of
>>> the driver?
>> Do you mean changing test pattern mode of different channel while other
>> channels are streaming?
> No, from the same channel. E.g. v4l2-ctl --stream-mmap, then do from another
> console 'v4l2-ctl -c test-pattern=1'.
>
> It depends on the hardware whether or not you can change the test pattern
> while streaming. But it is nice for testing if this is possible.

Test-pattern mode changes during active streaming will not get set as 
test-pattern mode is in CSI and mode is set every time during the start 
of streaming and then VI keeps capturing the frames.

basically its during CSI subdevice stream enable.


>> In v1, pg mode from handler is stored in vi which is common for all
>> channels.
>>
>> So, v2 has change to use channel specific pg mode rather than common
>> mode for all channels.
> That sounds better. You want independent test patterns for each channel
> if possible.
>
> Regards,
>
>          Hans
>
>>> Note that the RGB pixelformat appears to be incorrect: it is set to RGB32 but it
>>> should be BGR32. Actually, it should be XBGR32 since there is no alpha channel
>>> present (I think). RGB32 and BGR32 are deprecated in favor of RGBX/A and X/ABGR.
>>>
>>> Regards,
>>>
>>>           Hans
>> Will fix it.
>>>> Driver Info:
>>>>           Driver name      : tegra-video
>>>>           Card type        : 54080000.vi-output-0
>>>>           Bus info         : platform:54080000.vi:0
>>>>           Driver version   : 5.5.0
>>>>           Capabilities     : 0x85200001
>>>>                   Video Capture
>>>>                   Read/Write
>>>>                   Streaming
>>>>                   Extended Pix Format
>>>>                   Device Capabilities
>>>>           Device Caps      : 0x05200001
>>>>                   Video Capture
>>>>                   Read/Write
>>>>                   Streaming
>>>>                   Extended Pix Format
>>>> Media Driver Info:
>>>>           Driver name      : host1x_video
>>>>           Model            : NVIDIA Tegra Video Input Device
>>>>           Serial           :
>>>>           Bus info         :
>>>>           Media version    : 5.5.0
>>>>           Hardware revision: 0x00000003 (3)
>>>>           Driver version   : 5.5.0
>>>> Interface Info:
>>>>           ID               : 0x03000003
>>>>           Type             : V4L Video
>>>> Entity Info:
>>>>           ID               : 0x00000001 (1)
>>>>           Name             : 54080000.vi-output-0
>>>>           Function         : V4L2 I/O
>>>>           Pad 0x01000002   : 0: Sink
>>>>             Link 0x0200001b: from remote pad 0x100001a of entity 'tpg-0': Data, Enabled
>>>>
>>>> Required ioctls:
>>>>           test MC information (see 'Media Driver Info' above): OK
>>>>           test VIDIOC_QUERYCAP: OK
>>>>
>>>> Allow for multiple opens:
>>>>           test second /dev/video0 open: OK
>>>>           test VIDIOC_QUERYCAP: OK
>>>>           test VIDIOC_G/S_PRIORITY: OK
>>>>           test for unlimited opens: OK
>>>>
>>>>           test invalid ioctls: OK
>>>> Debug ioctls:
>>>>           test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>>           test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>>
>>>> Input ioctls:
>>>>           test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>>>           test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>>           test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>>           test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>>           test VIDIOC_G/S/ENUMINPUT: OK
>>>>           test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>>           Inputs: 1 Audio Inputs: 0 Tuners: 0
>>>>
>>>> Output ioctls:
>>>>           test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>>           test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>>           test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>>           test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>>           test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>>           Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>>
>>>> Input/Output configuration ioctls:
>>>>           test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>>>           test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>>>           test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>>           test VIDIOC_G/S_EDID: OK (Not Supported)
>>>>
>>>> Control ioctls (Input 0):
>>>>           test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>>>           test VIDIOC_QUERYCTRL: OK
>>>>           test VIDIOC_G/S_CTRL: OK
>>>>           test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>>>           test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>>>           test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>>           Standard Controls: 2 Private Controls: 0
>>>>
>>>> Format ioctls (Input 0):
>>>>           test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>>           test VIDIOC_G/S_PARM: OK (Not Supported)
>>>>           test VIDIOC_G_FBUF: OK (Not Supported)
>>>>           test VIDIOC_G_FMT: OK
>>>>           test VIDIOC_TRY_FMT: OK
>>>>           test VIDIOC_S_FMT: OK
>>>>           test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>>           test Cropping: OK (Not Supported)
>>>>           test Composing: OK (Not Supported)
>>>>           test Scaling: OK (Not Supported)
>>>>
>>>> Codec ioctls (Input 0):
>>>>           test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>>>           test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>>           test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>>
>>>> Buffer ioctls (Input 0):
>>>>           test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>>           test VIDIOC_EXPBUF: OK
>>>>           test Requests: OK (Not Supported)
>>>>
>>>> Test input 0:
>>>>
>>>> Streaming ioctls:
>>>>           test read/write: OK
>>>>           test blocking wait: OK
>>>>           test MMAP (no poll): OK
>>>>           test MMAP (select): OK
>>>>           test MMAP (epoll): OK
>>>>           test USERPTR (no poll): OK (Not Supported)
>>>>           test USERPTR (select): OK (Not Supported)
>>>>           test DMABUF: Cannot test, specify --expbuf-device
>>>>
>>>> Total for tegra-video device /dev/video0: 53, Succeeded: 53, Failed: 0, Warnings: 0
>>>>

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 0/5] Add Tegra driver for video capture
  2020-02-04 19:02       ` Sowjanya Komatineni
@ 2020-02-05  7:57         ` Hans Verkuil
  0 siblings, 0 replies; 55+ messages in thread
From: Hans Verkuil @ 2020-02-05  7:57 UTC (permalink / raw)
  To: Sowjanya Komatineni, thierry.reding, jonathanh, frankc
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

On 2/4/20 8:02 PM, Sowjanya Komatineni wrote:
>>>> I also noticed that changing the test pattern while streaming did not seem to have
>>>> any effect until I stop and restart streaming. Is that a limitation of the HW or of
>>>> the driver?
>>> Do you mean changing test pattern mode of different channel while other
>>> channels are streaming?
>> No, from the same channel. E.g. v4l2-ctl --stream-mmap, then do from another
>> console 'v4l2-ctl -c test-pattern=1'.
>>
>> It depends on the hardware whether or not you can change the test pattern
>> while streaming. But it is nice for testing if this is possible.
> 
> Test-pattern mode changes during active streaming will not get set as 
> test-pattern mode is in CSI and mode is set every time during the start 
> of streaming and then VI keeps capturing the frames.
> 
> basically its during CSI subdevice stream enable.

OK. Just add a little comment either at the point the control is created or
where the control is set in vi_s_ctrl(). It's just to document that this
will only take effect at the next streamon.

Regards,

	Hans

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 1/5] dt-bindings: clock: tegra: Add clk id for CSI TPG clock
  2020-01-28 18:23 ` [RFC PATCH v1 1/5] dt-bindings: clock: tegra: Add clk id for CSI TPG clock Sowjanya Komatineni
@ 2020-02-05 19:23   ` Stephen Boyd
  0 siblings, 0 replies; 55+ messages in thread
From: Stephen Boyd @ 2020-02-05 19:23 UTC (permalink / raw)
  To: frankc, hverkuil, jonathanh, skomatineni, thierry.reding
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Quoting Sowjanya Komatineni (2020-01-28 10:23:17)
> Tegra210 uses PLLD out internally for CSI TPG.
> 
> This patch adds clk id for this CSI TPG clock from PLLD.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---

Acked-by: Stephen Boyd <sboyd@kernel.org>


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 2/5] clk: tegra: Add Tegra210 CSI TPG clock gate
  2020-01-28 18:23 ` [RFC PATCH v1 2/5] clk: tegra: Add Tegra210 CSI TPG clock gate Sowjanya Komatineni
@ 2020-02-05 19:23   ` Stephen Boyd
  0 siblings, 0 replies; 55+ messages in thread
From: Stephen Boyd @ 2020-02-05 19:23 UTC (permalink / raw)
  To: frankc, hverkuil, jonathanh, skomatineni, thierry.reding
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Quoting Sowjanya Komatineni (2020-01-28 10:23:18)
> Tegra210 CSI hardware internally uses PLLD for internal test pattern
> generator logic.
> 
> PLLD_BASE register in CAR has a bit CSI_CLK_SOURCE to enable PLLD
> out to CSI during TPG mode.
> 
> This patch adds this CSI TPG clock gate to Tegra210 clock driver
> to allow Tegra video driver to ungate CSI TPG clock during TPG mode
> and gate during non TPG mode.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---

Acked-by: Stephen Boyd <sboyd@kernel.org>


^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-01-28 18:23 ` [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210 Sowjanya Komatineni
                     ` (3 preceding siblings ...)
  2020-01-30 14:45   ` Hans Verkuil
@ 2020-02-05 19:26   ` Stephen Boyd
  2020-02-05 19:54     ` Sowjanya Komatineni
  4 siblings, 1 reply; 55+ messages in thread
From: Stephen Boyd @ 2020-02-05 19:26 UTC (permalink / raw)
  To: frankc, hverkuil, jonathanh, skomatineni, thierry.reding
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel

Quoting Sowjanya Komatineni (2020-01-28 10:23:20)
> diff --git a/drivers/staging/media/tegra/Kconfig b/drivers/staging/media/tegra/Kconfig
> new file mode 100644
> index 000000000000..443b99f2e2c9
> --- /dev/null
> +++ b/drivers/staging/media/tegra/Kconfig
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config VIDEO_TEGRA
> +       tristate "NVIDIA Tegra VI driver"
> +       depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
> +       depends on COMMON_CLK

What depends on the common clk framework? I don't see any clk-provider.h
includes here.

> +       depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> +       depends on MEDIA_CONTROLLER
> +       select TEGRA_HOST1X
> +       select VIDEOBUF2_DMA_CONTIG
> +       select V4L2_FWNODE
> +       help
> +         Say yes here to enable support for Tegra video input hardware

^ permalink raw reply	[flat|nested] 55+ messages in thread

* Re: [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210
  2020-02-05 19:26   ` Stephen Boyd
@ 2020-02-05 19:54     ` Sowjanya Komatineni
  0 siblings, 0 replies; 55+ messages in thread
From: Sowjanya Komatineni @ 2020-02-05 19:54 UTC (permalink / raw)
  To: Stephen Boyd, frankc, hverkuil, jonathanh, thierry.reding
  Cc: linux-media, devicetree, linux-clk, linux-tegra, linux-kernel


On 2/5/20 11:26 AM, Stephen Boyd wrote:
> External email: Use caution opening links or attachments
>
>
> Quoting Sowjanya Komatineni (2020-01-28 10:23:20)
>> diff --git a/drivers/staging/media/tegra/Kconfig b/drivers/staging/media/tegra/Kconfig
>> new file mode 100644
>> index 000000000000..443b99f2e2c9
>> --- /dev/null
>> +++ b/drivers/staging/media/tegra/Kconfig
>> @@ -0,0 +1,12 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +config VIDEO_TEGRA
>> +       tristate "NVIDIA Tegra VI driver"
>> +       depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
>> +       depends on COMMON_CLK
> What depends on the common clk framework? I don't see any clk-provider.h
> includes here.
COMMON_CLK is not needed. Will remove in v2. Thanks.
>
>> +       depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
>> +       depends on MEDIA_CONTROLLER
>> +       select TEGRA_HOST1X
>> +       select VIDEOBUF2_DMA_CONTIG
>> +       select V4L2_FWNODE
>> +       help
>> +         Say yes here to enable support for Tegra video input hardware

^ permalink raw reply	[flat|nested] 55+ messages in thread

end of thread, other threads:[~2020-02-05 19:54 UTC | newest]

Thread overview: 55+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-28 18:23 [RFC PATCH v1 0/5] Add Tegra driver for video capture Sowjanya Komatineni
2020-01-28 18:23 ` [RFC PATCH v1 1/5] dt-bindings: clock: tegra: Add clk id for CSI TPG clock Sowjanya Komatineni
2020-02-05 19:23   ` Stephen Boyd
2020-01-28 18:23 ` [RFC PATCH v1 2/5] clk: tegra: Add Tegra210 CSI TPG clock gate Sowjanya Komatineni
2020-02-05 19:23   ` Stephen Boyd
2020-01-28 18:23 ` [RFC PATCH v1 3/5] dt-binding: tegra: Add VI and CSI bindings Sowjanya Komatineni
2020-01-28 20:32   ` Helen Koike
2020-01-28 21:04     ` Sowjanya Komatineni
2020-01-28 18:23 ` [RFC PATCH v1 4/5] media: tegra: Add Tegra Video input driver for Tegra210 Sowjanya Komatineni
2020-01-28 21:45   ` Helen Koike
2020-01-28 22:13     ` Sowjanya Komatineni
2020-01-29  0:49       ` Sowjanya Komatineni
2020-01-29  1:05         ` Helen Koike
2020-01-29  2:11           ` Sowjanya Komatineni
2020-01-29  5:59             ` Sowjanya Komatineni
2020-01-29 10:31             ` Helen Koike
2020-01-29 17:49               ` Sowjanya Komatineni
2020-01-29 18:15                 ` Sowjanya Komatineni
2020-01-29 18:46                   ` Helen Koike
2020-01-29 22:40                     ` Sowjanya Komatineni
2020-01-29 18:29                 ` Helen Koike
2020-01-29 18:46                   ` Sowjanya Komatineni
2020-01-29 10:09       ` Thierry Reding
2020-01-29 16:25         ` Sowjanya Komatineni
2020-01-29 11:13   ` Thierry Reding
2020-01-29 17:23     ` Sowjanya Komatineni
2020-01-30 12:20       ` Thierry Reding
2020-01-30 17:02         ` Sowjanya Komatineni
2020-01-29 14:16   ` Hans Verkuil (hansverk)
2020-01-29 17:27     ` Sowjanya Komatineni
2020-01-30 14:45   ` Hans Verkuil
2020-02-05 19:26   ` Stephen Boyd
2020-02-05 19:54     ` Sowjanya Komatineni
2020-01-28 18:23 ` [RFC PATCH v1 5/5] arm64: tegra: Add Tegra VI CSI suppport in device tree Sowjanya Komatineni
2020-01-29  9:46   ` Thierry Reding
2020-01-29 16:22     ` Sowjanya Komatineni
2020-01-30 12:36       ` Thierry Reding
2020-01-30 17:18         ` Sowjanya Komatineni
2020-01-30 17:58           ` Thierry Reding
2020-01-30 18:58             ` Sowjanya Komatineni
2020-01-30 20:18               ` Sowjanya Komatineni
2020-01-31  2:57                 ` Sowjanya Komatineni
2020-01-30 14:41 ` [RFC PATCH v1 0/5] Add Tegra driver for video capture Hans Verkuil
2020-01-30 15:42   ` Thierry Reding
2020-01-31 14:29     ` Hans Verkuil
2020-01-31 17:03       ` Thierry Reding
2020-01-31 17:37         ` Hans Verkuil
2020-01-31 20:31           ` Thierry Reding
2020-02-04  9:50         ` Hans Verkuil
2020-01-30 17:20   ` Sowjanya Komatineni
2020-02-04 12:53 ` Hans Verkuil
2020-02-04 16:42   ` Sowjanya Komatineni
2020-02-04 17:22     ` Hans Verkuil
2020-02-04 19:02       ` Sowjanya Komatineni
2020-02-05  7:57         ` Hans Verkuil

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).