From: Maulik Shah <mkshah@codeaurora.org>
To: swboyd@chromium.org, agross@kernel.org, david.brown@linaro.org,
sudeep.holla@arm.com, Lorenzo.Pieralisi@arm.com
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
bjorn.andersson@linaro.org, evgreen@chromium.org,
dianders@chromium.org, rnayak@codeaurora.org,
ilina@codeaurora.org, lsrao@codeaurora.org,
ulf.hansson@linaro.org, rjw@rjwysocki.net,
Maulik Shah <mkshah@codeaurora.org>,
devicetree@vger.kernel.org
Subject: [PATCH v3 6/7] arm64: dts: qcom: sc7180: Add cpuidle low power states
Date: Mon, 3 Feb 2020 19:05:39 +0530 [thread overview]
Message-ID: <1580736940-6985-7-git-send-email-mkshah@codeaurora.org> (raw)
In-Reply-To: <1580736940-6985-1-git-send-email-mkshah@codeaurora.org>
Add device bindings for cpuidle states for cpu devices.
Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
1 file changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8011c5f..0aa0ced 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -86,6 +86,9 @@
compatible = "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -103,6 +106,9 @@
compatible = "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_100>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -117,6 +123,9 @@
compatible = "arm,armv8";
reg = <0x0 0x200>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_200>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -131,6 +140,9 @@
compatible = "arm,armv8";
reg = <0x0 0x300>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_300>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -145,6 +157,9 @@
compatible = "arm,armv8";
reg = <0x0 0x400>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_400>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -159,6 +174,9 @@
compatible = "arm,armv8";
reg = <0x0 0x500>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_500>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
@@ -173,6 +191,9 @@
compatible = "arm,armv8";
reg = <0x0 0x600>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_600>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
@@ -187,6 +208,9 @@
compatible = "arm,armv8";
reg = <0x0 0x700>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
next-level-cache = <&L2_700>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
@@ -195,6 +219,60 @@
next-level-cache = <&L3_0>;
};
};
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <549>;
+ exit-latency-us = <901>;
+ min-residency-us = <1774>;
+ local-timer-stop;
+ };
+
+ LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <702>;
+ exit-latency-us = <915>;
+ min-residency-us = <4001>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <523>;
+ exit-latency-us = <1244>;
+ min-residency-us = <2207>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <526>;
+ exit-latency-us = <1854>;
+ min-residency-us = <5555>;
+ local-timer-stop;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "cluster-power-down";
+ arm,psci-suspend-param = <0x40003444>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9926>;
+ local-timer-stop;
+ };
+ };
};
memory@80000000 {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-02-03 13:37 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-03 13:35 [PATCH v3 0/7] Add RSC power domain support Maulik Shah
2020-02-03 13:35 ` [PATCH v3 1/7] drivers: qcom: rpmh: fix macro to accept NULL argument Maulik Shah
2020-02-03 13:35 ` [PATCH v3 2/7] drivers: qcom: rpmh: remove rpmh_flush export Maulik Shah
2020-02-03 13:35 ` [PATCH v3 3/7] dt-bindings: soc: qcom: Add RSC power domain specifier Maulik Shah
2020-02-03 13:35 ` [PATCH v3 4/7] drivers: qcom: rpmh-rsc: Add RSC power domain support Maulik Shah
2020-02-03 13:35 ` [PATCH v3 5/7] drivers: firmware: psci: Add hierarchical domain idle states converter Maulik Shah
2020-02-03 17:08 ` Sudeep Holla
2020-02-04 4:52 ` Maulik Shah
2020-02-04 15:21 ` Sudeep Holla
2020-02-05 12:23 ` Maulik Shah
2020-02-05 14:06 ` Sudeep Holla
2020-02-05 15:55 ` Ulf Hansson
2020-02-05 16:18 ` Sudeep Holla
2020-02-06 8:45 ` Ulf Hansson
2020-02-06 20:45 ` Lina Iyer
2020-02-07 11:20 ` Sudeep Holla
2020-02-07 12:32 ` Ulf Hansson
2020-02-07 14:48 ` Lorenzo Pieralisi
2020-02-07 15:52 ` Ulf Hansson
2020-02-07 16:15 ` Sudeep Holla
2020-02-08 10:25 ` Ulf Hansson
2020-02-10 10:31 ` Sudeep Holla
2020-02-07 16:05 ` Sudeep Holla
2020-02-06 21:11 ` Bjorn Andersson
2020-02-07 11:25 ` Sudeep Holla
2020-02-03 13:35 ` Maulik Shah [this message]
2020-02-04 23:15 ` [PATCH v3 6/7] arm64: dts: qcom: sc7180: Add cpuidle low power states Matthias Kaehlcke
2020-02-05 12:07 ` Maulik Shah
2020-02-03 13:35 ` [PATCH v3 7/7] arm64: dts: qcom: sc7180: Convert to the hierarchical CPU topology layout Maulik Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580736940-6985-7-git-send-email-mkshah@codeaurora.org \
--to=mkshah@codeaurora.org \
--cc=Lorenzo.Pieralisi@arm.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lsrao@codeaurora.org \
--cc=rjw@rjwysocki.net \
--cc=rnayak@codeaurora.org \
--cc=sudeep.holla@arm.com \
--cc=swboyd@chromium.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).