From: Sharat Masetty <smasetty@codeaurora.org>
To: freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: dri-devel@freedesktop.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, bjorn.andersson@linaro.org,
jcrouse@codeaurora.org, mka@chromium.org, dianders@chromium.org,
Sharat Masetty <smasetty@codeaurora.org>
Subject: [PATCH v6] arm64: dts: qcom: sc7180: Add A618 gpu dt blob
Date: Mon, 10 Feb 2020 13:11:05 +0530 [thread overview]
Message-ID: <1581320465-15854-2-git-send-email-smasetty@codeaurora.org> (raw)
In-Reply-To: <1581320465-15854-1-git-send-email-smasetty@codeaurora.org>
This patch adds the required dt nodes and properties
to enabled A618 GPU.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++
1 file changed, 102 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index f3fcc5c..63fff15 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1043,6 +1043,108 @@
};
};
+ gpu: gpu@5000000 {
+ compatible = "qcom,adreno-618.0", "qcom,adreno";
+ #stream-id-cells = <16>;
+ reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
+ <0 0x05061000 0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&adreno_smmu 0>;
+ operating-points-v2 = <&gpu_opp_table>;
+ qcom,gmu = <&gmu>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ opp-565000000 {
+ opp-hz = /bits/ 64 <565000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ opp-430000000 {
+ opp-hz = /bits/ 64 <430000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-355000000 {
+ opp-hz = /bits/ 64 <355000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ opp-180000000 {
+ opp-hz = /bits/ 64 <180000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+ };
+ };
+
+ adreno_smmu: iommu@5040000 {
+ compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2";
+ reg = <0 0x05040000 0 0x10000>;
+ #iommu-cells = <1>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_CFG_AHB_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>;
+
+ clock-names = "bus", "iface", "mem_iface_clk";
+ power-domains = <&gpucc CX_GDSC>;
+ };
+
+ gmu: gmu@506a000 {
+ compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
+ reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
+ <0 0x0b490000 0 0x10000>;
+ reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+ clock-names = "gmu", "cxo", "axi", "memnoc";
+ power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>;
+ power-domain-names = "cx", "gx";
+ iommus = <&adreno_smmu 5>;
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+ };
+ };
+
gpucc: clock-controller@5090000 {
compatible = "qcom,sc7180-gpucc";
reg = <0 0x05090000 0 0x9000>;
--
1.9.1
next prev parent reply other threads:[~2020-02-10 7:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-10 7:41 [PATCH v6] sc7180: Add A618 GPU bindings Sharat Masetty
2020-02-10 7:41 ` Sharat Masetty [this message]
2020-02-10 21:21 ` [PATCH v6] arm64: dts: qcom: sc7180: Add A618 gpu dt blob Doug Anderson
2020-02-20 8:20 ` Sharat Masetty
2020-02-20 16:19 ` [Freedreno] " Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1581320465-15854-2-git-send-email-smasetty@codeaurora.org \
--to=smasetty@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jcrouse@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).