[PATCH v3 0/4] Add QMP V3 USB3 PHY support for SC7180

[PATCH v3 0/4] Add QMP V3 USB3 PHY support for SC7180

[Sandeep Maheswaram]

Add QMP V3 USB3 PHY entries for SC7180 in phy driver and
device tree bindings.

changes in v3:
*Addressed Rob's comments in yaml file.
*Sepearated the SC7180 support in yaml patch.
*corrected the phy reset entries in device tree.

changes in v2:
*Remove global phy reset in QMP phy.
*Convert QMP phy bindings to yaml.

Sandeep Maheswaram (4):
  dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml
  dt-bindings: phy: qcom,qmp: Add support for SC7180
  phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
  arm64: dts: qcom: sc7180: Correct qmp phy reset entries

 .../devicetree/bindings/phy/qcom,qmp-phy.yaml      | 287 +++++++++++++++++++++
 .../devicetree/bindings/phy/qcom-qmp-phy.txt       | 227 ----------------
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |   4 +-
 drivers/phy/qualcomm/phy-qcom-qmp.c                |  38 +++
 4 files changed, 327 insertions(+), 229 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v3 1/4] dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml

[Sandeep Maheswaram]

Convert QMP phy  bindings to DT schema format using json-schema.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml      | 283 +++++++++++++++++++++
 .../devicetree/bindings/phy/qcom-qmp-phy.txt       | 227 -----------------
 2 files changed, 283 insertions(+), 227 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
new file mode 100644
index 0000000..b39a594
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -0,0 +1,283 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QMP PHY controller
+
+maintainers:
+  - Manu Gautam <mgautam@codeaurora.org>
+
+description:
+  QMP phy controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq8074-qmp-pcie-phy
+      - qcom,msm8996-qmp-pcie-phy
+      - qcom,msm8996-qmp-usb3-phy
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,msm8998-qmp-ufs-phy
+      - qcom,msm8998-qmp-pcie-phy
+      - qcom,sdm845-qmp-usb3-phy
+      - qcom,sdm845-qmp-usb3-uni-phy
+      - qcom,sdm845-qmp-ufs-phy
+      - qcom,sm8150-qmp-ufs-phy
+
+  reg:
+    minItems: 1
+    items:
+      - description: Address and length of PHY's common serdes block.
+      - description: Address and length of the DP_COM control block.
+
+  reg-names:
+    items:
+      - const: reg-base
+      - const: dp_com
+
+  "#clock-cells":
+     enum: [ 1, 2 ]
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  clocks:
+    maxItems: 4
+    minItems: 1
+
+  clock-names:
+    maxItems: 4
+    minItems: 1
+
+  resets:
+    maxItems: 3
+    minItems: 1
+
+  reset-names:
+    maxItems: 3
+    minItems: 1
+
+  vdda-phy-supply:
+    description:
+        Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+        Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vddp-ref-clk-supply:
+    description:
+        Phandle to a regulator supply to any specific refclk
+        pll block.
+
+#Required nodes:
+patternProperties:
+  "^lanes@[0-9a-f]+$":
+    type: object
+    description:
+      Each device node of QMP phy is required to have as many child nodes as
+      the number of lanes the PHY has.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+             enum:
+               - qcom,sdm845-qmp-usb3-phy
+               - qcom,sdm845-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+             - const: phy
+             - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+             enum:
+               - qcom,msm8996-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+            - description: phy's ahb cfg block reset.
+        reset-names:
+          items:
+             - const: phy
+             - const: common
+             - const: cfg
+  - if:
+      properties:
+        compatible:
+          contains:
+             enum:
+               - qcom,msm8996-qmp-pcie-phy
+               - qcom,msm8996-qmp-usb3-phy
+               - qcom,msm8998-qmp-pcie-phy
+               - qcom,msm8998-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+             - const: phy
+             - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+             enum:
+               - qcom,msm8998-qmp-ufs-phy
+               - qcom,sdm845-qmp-ufs-phy
+               - qcom,sm8150-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: 19.2 MHz ref clk.
+            - description: Phy reference aux clock.
+        clock-names:
+          items:
+            - const: ref
+            - const: ref_aux
+        resets:
+          items:
+            - description: PHY reset in the UFS controller.
+        reset-names:
+          items:
+            - const: ufsphy
+  - if:
+      properties:
+        compatible:
+          contains:
+             enum:
+               - qcom,ipq8074-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pipe clk.
+        clock-names:
+          items:
+            - const: pipe_clk
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sdm845-qmp-usb3-phy
+    then:
+      required:
+        - reg-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_1_qmpphy: phy@88e9000 {
+        compatible = "qcom,sdm845-qmp-usb3-phy";
+        reg = <0 0x088e9000 0 0x18c>,
+              <0 0x088e8000 0 0x10>;
+        reg-names = "reg-base", "dp_com";
+        #clock-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+                 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb_1_ssphy: lanes@88e9200 {
+                reg = <0 0x088e9200 0 0x128>,
+                      <0 0x088e9400 0 0x200>,
+                      <0 0x088e9c00 0 0x218>,
+                      <0 0x088e9600 0 0x128>,
+                      <0 0x088e9800 0 0x200>,
+                      <0 0x088e9a00 0 0x100>;
+                #phy-cells = <0>;
+                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                clock-names = "pipe0";
+                clock-output-names = "usb3_phy_pipe_clk_src";
+            };
+        };
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
deleted file mode 100644
index eac9ad3..0000000
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ /dev/null
@@ -1,227 +0,0 @@
-Qualcomm QMP PHY controller
-===========================
-
-QMP phy controller supports physical layer functionality for a number of
-controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
-
-Required properties:
- - compatible: compatible list, contains:
-	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
-	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
-	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
-	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
-	       "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
-	       "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
-	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
-	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
-	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
-	       "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150.
-
-- reg:
-  - index 0: address and length of register set for PHY's common
-             serdes block.
-  - index 1: address and length of the DP_COM control block (for
-             "qcom,sdm845-qmp-usb3-phy" only).
-
-- reg-names:
-  - For "qcom,sdm845-qmp-usb3-phy":
-    - Should be: "reg-base", "dp_com"
-  - For all others:
-    - The reg-names property shouldn't be defined.
-
- - #address-cells: must be 1
- - #size-cells: must be 1
- - ranges: must be present
-
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: "cfg_ahb" for phy config clock,
-		"aux" for phy aux clock,
-		"ref" for 19.2 MHz ref clk,
-		"com_aux" for phy common block aux clock,
-		"ref_aux" for phy reference aux clock,
-
-		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8996-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8998-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8998-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-		For "qcom,msm8998-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,sdm845-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref", "com_aux".
-		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
-			"aux", "cfg_ahb", "ref", "com_aux".
-		For "qcom,sdm845-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-		For "qcom,sm8150-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: "phy" for reset of phy block,
-		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset,
-		"ufsphy" for the PHY reset in the UFS controller.
-
-		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-			"phy", "common".
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"phy", "common", "cfg".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-			"phy", "common".
-		For "qcom,msm8998-qmp-usb3-phy" must contain
-			"phy", "common".
-		For "qcom,msm8998-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,msm8998-qmp-pcie-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-usb3-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,sm8150-qmp-ufs-phy": must contain:
-			"ufsphy".
-
- - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-Optional properties:
- - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk
-			pll block.
-
-Required nodes:
- - Each device node of QMP phy is required to have as many child nodes as
-   the number of lanes the PHY has.
-
-Required properties for child nodes of PCIe PHYs (one child per lane):
- - reg: list of offset and length pairs of register sets for PHY blocks -
-	tx, rx, pcs, and pcs_misc (optional).
- - #phy-cells: must be 0
-
-Required properties for a single "lanes" child node of non-PCIe PHYs:
- - reg: list of offset and length pairs of register sets for PHY blocks
-	For 1-lane devices:
-		tx, rx, pcs, and (optionally) pcs_misc
-	For 2-lane devices:
-		tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc
- - #phy-cells: must be 0
-
-Required properties for child node of PCIe and USB3 qmp phys:
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: Must contain following:
-		 "pipe<lane-number>" for pipe clock specific to each lane.
- - clock-output-names: Name of the PHY clock that will be the parent for
-		       the above pipe clock.
-	For "qcom,ipq8074-qmp-pcie-phy":
-		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
-			(or)
-		  "pcie20_phy1_pipe_clk"
- - #clock-cells: must be 0
-    - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then
-      gate-controlled by the gcc.
-
-Required properties for child node of PHYs with lane reset, AKA:
-	"qcom,msm8996-qmp-pcie-phy"
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: Must contain following:
-		 "lane<lane-number>" for reset specific to each lane.
-
-Example:
-	phy@34000 {
-		compatible = "qcom,msm8996-qmp-pcie-phy";
-		reg = <0x34000 0x488>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-			<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
-			<&gcc GCC_PCIE_CLKREF_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref";
-
-		vdda-phy-supply = <&pm8994_l28>;
-		vdda-pll-supply = <&pm8994_l12>;
-
-		resets = <&gcc GCC_PCIE_PHY_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
-		reset-names = "phy", "common", "cfg";
-
-		pciephy_0: lane@35000 {
-			reg = <0x35000 0x130>,
-				<0x35200 0x200>,
-				<0x35400 0x1dc>;
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-			clock-names = "pipe0";
-			clock-output-names = "pcie_0_pipe_clk_src";
-			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-			reset-names = "lane0";
-		};
-
-		pciephy_1: lane@36000 {
-		...
-		...
-	};
-
-	phy@88eb000 {
-		compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-		reg = <0x88eb000 0x18c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-			 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-			 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-		resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-			 <&gcc GCC_USB3_PHY_SEC_BCR>;
-		reset-names = "phy", "common";
-
-		lane@88eb200 {
-			reg = <0x88eb200 0x128>,
-			      <0x88eb400 0x1fc>,
-			      <0x88eb800 0x218>,
-			      <0x88eb600 0x70>;
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-			clock-names = "pipe0";
-			clock-output-names = "usb3_uni_phy_pipe_clk_src";
-		};
-	};
-
-	phy@1d87000 {
-		compatible = "qcom,sdm845-qmp-ufs-phy";
-		reg = <0x1d87000 0x18c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-names = "ref",
-			      "ref_aux";
-		clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-			 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
-		lanes@1d87400 {
-			reg = <0x1d87400 0x108>,
-			      <0x1d87600 0x1e0>,
-			      <0x1d87c00 0x1dc>,
-			      <0x1d87800 0x108>,
-			      <0x1d87a00 0x1e0>;
-			#phy-cells = <0>;
-		};
-	};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v3 2/4] dt-bindings: phy: qcom,qmp: Add support for SC7180

[Sandeep Maheswaram]

Add compatible for SC7180 in qmp phy bindings.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index b39a594..8c153e3 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -23,6 +23,7 @@ properties:
       - qcom,msm8998-qmp-usb3-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,msm8998-qmp-pcie-phy
+      - qcom,sc7180-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-ufs-phy
@@ -105,9 +106,10 @@ allOf:
       properties:
         compatible:
           contains:
-             enum:
-               - qcom,sdm845-qmp-usb3-phy
-               - qcom,sdm845-qmp-usb3-uni-phy
+            enum:
+              - qcom,sc7180-qmp-usb3-phy
+              - qcom,sdm845-qmp-usb3-phy
+              - qcom,sdm845-qmp-usb3-uni-phy
     then:
       properties:
         clocks:
@@ -238,7 +240,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: qcom,sdm845-qmp-usb3-phy
+            enum:
+              - qcom,sc7180-qmp-usb3-phy
+              - qcom,sdm845-qmp-usb3-phy
     then:
       required:
         - reg-names
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v3 3/4] phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180

[Sandeep Maheswaram]

Adding QMP v3 USB3 phy support for SC7180.
Adding only usb phy reset in the list to avoid
reset of DP block.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 38 +++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 7db2a94..dc300a9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -1139,6 +1139,10 @@ static const char * const msm8996_usb3phy_reset_l[] = {
 	"phy", "common",
 };
 
+static const char * const sc7180_usb3phy_reset_l[] = {
+	"phy",
+};
+
 /* list of regulators */
 static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
@@ -1265,6 +1269,37 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
 	.is_dual_lane_phy	= true,
 };
 
+static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
+	.type			= PHY_TYPE_USB3,
+	.nlanes			= 1,
+
+	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
+	.tx_tbl			= qmp_v3_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
+	.rx_tbl			= qmp_v3_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
+	.pcs_tbl		= qmp_v3_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
+	.clk_list		= qmp_v3_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
+	.reset_list		= sc7180_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(sc7180_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
+	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
+
+	.has_phy_dp_com_ctrl	= true,
+	.is_dual_lane_phy	= true,
+};
+
 static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,
@@ -2103,6 +2138,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 		.compatible = "qcom,ipq8074-qmp-pcie-phy",
 		.data = &ipq8074_pciephy_cfg,
 	}, {
+		.compatible = "qcom,sc7180-qmp-usb3-phy",
+		.data = &sc7180_usb3phy_cfg,
+	}, {
 		.compatible = "qcom,sdm845-qmp-usb3-phy",
 		.data = &qmp_v3_usb3phy_cfg,
 	}, {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v3 4/4] arm64: dts: qcom: sc7180: Correct qmp phy reset entries

[Sandeep Maheswaram]

The phy reset entries were incorrect.so swapped them.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8011c5f..63bd7f1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1081,8 +1081,8 @@
 				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
 			usb_1_ssphy: phy@88e9200 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v3 1/4] dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml

[Matthias Kaehlcke]

Hi Sandeep,

On Wed, Feb 12, 2020 at 04:51:25PM +0530, Sandeep Maheswaram wrote:
> Convert QMP phy  bindings to DT schema format using json-schema.

nit: s/phy  bindings/PHY bindings/

> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  .../devicetree/bindings/phy/qcom,qmp-phy.yaml      | 283 +++++++++++++++++++++
>  .../devicetree/bindings/phy/qcom-qmp-phy.txt       | 227 -----------------
>  2 files changed, 283 insertions(+), 227 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> new file mode 100644
> index 0000000..b39a594
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -0,0 +1,283 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm QMP PHY controller
> +
> +maintainers:
> +  - Manu Gautam <mgautam@codeaurora.org>
> +
> +description:
> +  QMP phy controller supports physical layer functionality for a number of
> +  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,ipq8074-qmp-pcie-phy
> +      - qcom,msm8996-qmp-pcie-phy
> +      - qcom,msm8996-qmp-usb3-phy
> +      - qcom,msm8998-qmp-usb3-phy
> +      - qcom,msm8998-qmp-ufs-phy
> +      - qcom,msm8998-qmp-pcie-phy
> +      - qcom,sdm845-qmp-usb3-phy
> +      - qcom,sdm845-qmp-usb3-uni-phy
> +      - qcom,sdm845-qmp-ufs-phy
> +      - qcom,sm8150-qmp-ufs-phy

nit: sort in alphabetical order (i.e. -pcie, -ufs, -usb3)?

> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description: Address and length of PHY's common serdes block.
> +      - description: Address and length of the DP_COM control block.
> +
> +  reg-names:
> +    items:
> +      - const: reg-base
> +      - const: dp_com
> +
> +  "#clock-cells":
> +     enum: [ 1, 2 ]
> +
> +  "#address-cells":
> +    enum: [ 1, 2 ]
> +
> +  "#size-cells":
> +    enum: [ 1, 2 ]
> +
> +  clocks:
> +    maxItems: 4
> +    minItems: 1

nit: minItems before maxItems, which is the order humans expect, also
it is the prevalent order in other .yaml bindings.

Do we actually need min/maxItems? I would expect the below rules for each
compatible string to take care of it, however I'm not a schema expert.

> +
> +  clock-names:
> +    maxItems: 4
> +    minItems: 1
> +  resets:
> +    maxItems: 3
> +    minItems: 1
> +
> +  reset-names:
> +    maxItems: 3
> +    minItems: 1
> +
> +  vdda-phy-supply:
> +    description:
> +        Phandle to a regulator supply to PHY core block.
> +
> +  vdda-pll-supply:
> +    description:
> +        Phandle to 1.8V regulator supply to PHY refclk pll block.
> +
> +  vddp-ref-clk-supply:
> +    description:
> +        Phandle to a regulator supply to any specific refclk
> +        pll block.
> +
> +#Required nodes:
> +patternProperties:
> +  "^lanes@[0-9a-f]+$":
> +    type: object
> +    description:
> +      Each device node of QMP phy is required to have as many child nodes as
> +      the number of lanes the PHY has.
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#clock-cells"
> +  - "#address-cells"
> +  - "#size-cells"
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +             enum:

fix indentation (2 blanks, not 3)

> +               - qcom,sdm845-qmp-usb3-phy
> +               - qcom,sdm845-qmp-usb3-uni-phy
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: Phy aux clock.
> +            - description: Phy config clock.
> +            - description: 19.2 MHz ref clk.
> +            - description: Phy common block aux clock.
> +        clock-names:
> +          items:
> +            - const: aux
> +            - const: cfg_ahb
> +            - const: ref
> +            - const: com_aux
> +        resets:
> +          items:
> +            - description: reset of phy block.
> +            - description: phy common block reset.
> +        reset-names:
> +          items:
> +             - const: phy
> +             - const: common

fix indentation (3 -> 2)

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +             enum:

fix indentation (3 -> 2)

> +               - qcom,msm8996-qmp-pcie-phy
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: Phy aux clock.
> +            - description: Phy config clock.
> +            - description: 19.2 MHz ref clk.
> +

nit: remove empty line or add it everywhere.

> +        clock-names:
> +          items:
> +            - const: aux
> +            - const: cfg_ahb
> +            - const: ref
> +        resets:
> +          items:
> +            - description: reset of phy block.
> +            - description: phy common block reset.
> +            - description: phy's ahb cfg block reset.
> +        reset-names:
> +          items:
> +             - const: phy
> +             - const: common
> +             - const: cfg

fix indentation (3 -> 2)

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +             enum:

fix indentation (3 -> 2)

> +               - qcom,msm8996-qmp-pcie-phy
> +               - qcom,msm8996-qmp-usb3-phy
> +               - qcom,msm8998-qmp-pcie-phy
> +               - qcom,msm8998-qmp-usb3-phy
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: Phy aux clock.
> +            - description: Phy config clock.
> +            - description: 19.2 MHz ref clk.
> +        clock-names:
> +          items:
> +            - const: aux
> +            - const: cfg_ahb
> +            - const: ref
> +        resets:
> +          items:
> +            - description: reset of phy block.
> +            - description: phy common block reset.
> +        reset-names:
> +          items:
> +             - const: phy
> +             - const: common

According to the .txt binding this is not correct for
'qcom,msm8996-qmp-pcie-phy':

  For "qcom,msm8996-qmp-pcie-phy" must contain:
			"phy", "common", "cfg".

This also matches the actual use in arch/arm64/boot/dts/qcom/msm8996.dtsi

Also the indentation needs to be fixed (3 -> 2)

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +             enum:

fix indentation (3 -> 2)

> +               - qcom,msm8998-qmp-ufs-phy
> +               - qcom,sdm845-qmp-ufs-phy
> +               - qcom,sm8150-qmp-ufs-phy
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: 19.2 MHz ref clk.
> +            - description: Phy reference aux clock.
> +        clock-names:
> +          items:
> +            - const: ref
> +            - const: ref_aux
> +        resets:
> +          items:
> +            - description: PHY reset in the UFS controller.
> +        reset-names:
> +          items:
> +            - const: ufsphy
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +             enum:

fix indentation (3 -> 2)

Thanks

Matthias

Re: [PATCH v3 2/4] dt-bindings: phy: qcom,qmp: Add support for SC7180

[Matthias Kaehlcke]

On Wed, Feb 12, 2020 at 04:51:26PM +0530, Sandeep Maheswaram wrote:
> Add compatible for SC7180 in qmp phy bindings.

nit: QMP PHY

> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index b39a594..8c153e3 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -23,6 +23,7 @@ properties:
>        - qcom,msm8998-qmp-usb3-phy
>        - qcom,msm8998-qmp-ufs-phy
>        - qcom,msm8998-qmp-pcie-phy
> +      - qcom,sc7180-qmp-usb3-phy
>        - qcom,sdm845-qmp-usb3-phy
>        - qcom,sdm845-qmp-usb3-uni-phy
>        - qcom,sdm845-qmp-ufs-phy
> @@ -105,9 +106,10 @@ allOf:
>        properties:
>          compatible:
>            contains:
> -             enum:
> -               - qcom,sdm845-qmp-usb3-phy
> -               - qcom,sdm845-qmp-usb3-uni-phy
> +            enum:
> +              - qcom,sc7180-qmp-usb3-phy
> +              - qcom,sdm845-qmp-usb3-phy
> +              - qcom,sdm845-qmp-usb3-uni-phy

There is some extra churn from fixing the indentation, but that's the
fault of the parent patch and will go away when $parent is fixed.

>      then:
>        properties:
>          clocks:
> @@ -238,7 +240,9 @@ allOf:
>        properties:
>          compatible:
>            contains:
> -            const: qcom,sdm845-qmp-usb3-phy
> +            enum:
> +              - qcom,sc7180-qmp-usb3-phy
> +              - qcom,sdm845-qmp-usb3-phy
>      then:
>        required:
>          - reg-names

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH v3 3/4] phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180

[Matthias Kaehlcke]

On Wed, Feb 12, 2020 at 04:51:27PM +0530, Sandeep Maheswaram wrote:
> Adding QMP v3 USB3 phy support for SC7180.
> Adding only usb phy reset in the list to avoid
> reset of DP block.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 38 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 7db2a94..dc300a9 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -1139,6 +1139,10 @@ static const char * const msm8996_usb3phy_reset_l[] = {
>  	"phy", "common",
>  };
>  
> +static const char * const sc7180_usb3phy_reset_l[] = {
> +	"phy",
> +};
> +
>  /* list of regulators */
>  static const char * const qmp_phy_vreg_l[] = {
>  	"vdda-phy", "vdda-pll",
> @@ -1265,6 +1269,37 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
>  	.is_dual_lane_phy	= true,
>  };
>  
> +static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
> +	.type			= PHY_TYPE_USB3,
> +	.nlanes			= 1,
> +
> +	.serdes_tbl		= qmp_v3_usb3_serdes_tbl,
> +	.serdes_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
> +	.tx_tbl			= qmp_v3_usb3_tx_tbl,
> +	.tx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_tx_tbl),
> +	.rx_tbl			= qmp_v3_usb3_rx_tbl,
> +	.rx_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
> +	.pcs_tbl		= qmp_v3_usb3_pcs_tbl,
> +	.pcs_tbl_num		= ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
> +	.clk_list		= qmp_v3_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
> +	.reset_list		= sc7180_usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(sc7180_usb3phy_reset_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= qmp_v3_usb3phy_regs_layout,
> +
> +	.start_ctrl		= SERDES_START | PCS_START,
> +	.pwrdn_ctrl		= SW_PWRDN,
> +
> +	.has_pwrdn_delay	= true,
> +	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
> +	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
> +
> +	.has_phy_dp_com_ctrl	= true,
> +	.is_dual_lane_phy	= true,
> +};
> +
>  static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
>  	.type			= PHY_TYPE_USB3,
>  	.nlanes			= 1,
> @@ -2103,6 +2138,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
>  		.compatible = "qcom,ipq8074-qmp-pcie-phy",
>  		.data = &ipq8074_pciephy_cfg,
>  	}, {
> +		.compatible = "qcom,sc7180-qmp-usb3-phy",
> +		.data = &sc7180_usb3phy_cfg,
> +	}, {
>  		.compatible = "qcom,sdm845-qmp-usb3-phy",
>  		.data = &qmp_v3_usb3phy_cfg,
>  	}, {

I don't claim to be really knowledgable about this driver, but I confirmed
that this matches qmp_v3_usb3phy_cfg, except for the resets, since we don't
want to reset DP from the USB driver.

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH v3 4/4] arm64: dts: qcom: sc7180: Correct qmp phy reset entries

[Matthias Kaehlcke]

On Wed, Feb 12, 2020 at 04:51:28PM +0530, Sandeep Maheswaram wrote:
> The phy reset entries were incorrect.so swapped them.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 8011c5f..63bd7f1 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1081,8 +1081,8 @@
>  				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
>  			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
>  
> -			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
> -				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
> +			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> +				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
>  			reset-names = "phy", "common";
>  
>  			usb_1_ssphy: phy@88e9200 {

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH v3 1/4] dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml

[Rob Herring]

On Wed, 12 Feb 2020 16:51:25 +0530, Sandeep Maheswaram wrote:
> Convert QMP phy  bindings to DT schema format using json-schema.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  .../devicetree/bindings/phy/qcom,qmp-phy.yaml      | 283 +++++++++++++++++++++
>  .../devicetree/bindings/phy/qcom-qmp-phy.txt       | 227 -----------------
>  2 files changed, 283 insertions(+), 227 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,qmp-phy.example.dt.yaml: phy@88e9000: '#phy-cells' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,qmp-phy.example.dt.yaml: lanes@88e9200: '#clock-cells' is a dependency of 'clock-output-names'

See https://patchwork.ozlabs.org/patch/1236789
Please check and re-submit.

Re: [PATCH v3 2/4] dt-bindings: phy: qcom,qmp: Add support for SC7180

[Rob Herring]

On Wed, 12 Feb 2020 16:51:26 +0530, Sandeep Maheswaram wrote:
> Add compatible for SC7180 in qmp phy bindings.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 0/4] Add QMP V3 USB3 PHY support for SC7180

[Matthias Kaehlcke]

Hi Sandeep,

this series has a few minor outstanding comments that prevent it from
landing. Do you plan to respin it soon?

Thanks

Matthias

On Wed, Feb 12, 2020 at 04:51:24PM +0530, Sandeep Maheswaram wrote:
> Add QMP V3 USB3 PHY entries for SC7180 in phy driver and
> device tree bindings.
> 
> changes in v3:
> *Addressed Rob's comments in yaml file.
> *Sepearated the SC7180 support in yaml patch.
> *corrected the phy reset entries in device tree.
> 
> changes in v2:
> *Remove global phy reset in QMP phy.
> *Convert QMP phy bindings to yaml.
> 
> Sandeep Maheswaram (4):
>   dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml
>   dt-bindings: phy: qcom,qmp: Add support for SC7180
>   phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
>   arm64: dts: qcom: sc7180: Correct qmp phy reset entries
> 
>  .../devicetree/bindings/phy/qcom,qmp-phy.yaml      | 287 +++++++++++++++++++++
>  .../devicetree/bindings/phy/qcom-qmp-phy.txt       | 227 ----------------
>  arch/arm64/boot/dts/qcom/sc7180.dtsi               |   4 +-
>  drivers/phy/qualcomm/phy-qcom-qmp.c                |  38 +++
>  4 files changed, 327 insertions(+), 229 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> 
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

Re: [PATCH v3 0/4] Add QMP V3 USB3 PHY support for SC7180

[Sandeep Maheswaram (Temp)]

Hi Matthias,

Will do it by 3/9.

Regards

Sandeep

On 3/6/2020 12:27 AM, Matthias Kaehlcke wrote:
> Hi Sandeep,
>
> this series has a few minor outstanding comments that prevent it from
> landing. Do you plan to respin it soon?
>
> Thanks
>
> Matthias
>
> On Wed, Feb 12, 2020 at 04:51:24PM +0530, Sandeep Maheswaram wrote:
>> Add QMP V3 USB3 PHY entries for SC7180 in phy driver and
>> device tree bindings.
>>
>> changes in v3:
>> *Addressed Rob's comments in yaml file.
>> *Sepearated the SC7180 support in yaml patch.
>> *corrected the phy reset entries in device tree.
>>
>> changes in v2:
>> *Remove global phy reset in QMP phy.
>> *Convert QMP phy bindings to yaml.
>>
>> Sandeep Maheswaram (4):
>>    dt-bindings: phy: qcom,qmp: Convert QMP phy bindings to yaml
>>    dt-bindings: phy: qcom,qmp: Add support for SC7180
>>    phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
>>    arm64: dts: qcom: sc7180: Correct qmp phy reset entries
>>
>>   .../devicetree/bindings/phy/qcom,qmp-phy.yaml      | 287 +++++++++++++++++++++
>>   .../devicetree/bindings/phy/qcom-qmp-phy.txt       | 227 ----------------
>>   arch/arm64/boot/dts/qcom/sc7180.dtsi               |   4 +-
>>   drivers/phy/qualcomm/phy-qcom-qmp.c                |  38 +++
>>   4 files changed, 327 insertions(+), 229 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
>>   delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>>
>> -- 
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>> of Code Aurora Forum, hosted by The Linux Foundation
>>
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation