* [PATCH 0/2] Convert QSPI binding to YAML and add interconnect doc
@ 2020-02-17 9:49 Akash Asthana
2020-02-17 9:49 ` [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML Akash Asthana
2020-02-17 9:49 ` [PATCH 2/2] dt-bindings: spi: Add interconnect binding for QSPI Akash Asthana
0 siblings, 2 replies; 6+ messages in thread
From: Akash Asthana @ 2020-02-17 9:49 UTC (permalink / raw)
To: robh+dt, agross, mark.rutland
Cc: linux-arm-msm, devicetree, linux-kernel, mgautam, rojay, skakit,
swboyd, Akash Asthana
Akash Asthana (2):
dt-bindings: spi: Convert QSPI bindings to YAML
dt-bindings: spi: Add interconnect binding for QSPI
.../devicetree/bindings/spi/qcom,spi-qcom-qspi.txt | 36 --------
.../bindings/spi/qcom,spi-qcom-qspi.yaml | 97 ++++++++++++++++++++++
2 files changed, 97 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML
2020-02-17 9:49 [PATCH 0/2] Convert QSPI binding to YAML and add interconnect doc Akash Asthana
@ 2020-02-17 9:49 ` Akash Asthana
2020-02-20 2:29 ` Stephen Boyd
2020-02-17 9:49 ` [PATCH 2/2] dt-bindings: spi: Add interconnect binding for QSPI Akash Asthana
1 sibling, 1 reply; 6+ messages in thread
From: Akash Asthana @ 2020-02-17 9:49 UTC (permalink / raw)
To: robh+dt, agross, mark.rutland
Cc: linux-arm-msm, devicetree, linux-kernel, mgautam, rojay, skakit,
swboyd, Akash Asthana
Convert QSPI bindings to DT schema format using json-schema.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
.../devicetree/bindings/spi/qcom,spi-qcom-qspi.txt | 36 ---------
.../bindings/spi/qcom,spi-qcom-qspi.yaml | 89 ++++++++++++++++++++++
2 files changed, 89 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
deleted file mode 100644
index 1d64b61..0000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Qualcomm Quad Serial Peripheral Interface (QSPI)
-
-The QSPI controller allows SPI protocol communication in single, dual, or quad
-wire transmission modes for read/write access to slaves such as NOR flash.
-
-Required properties:
-- compatible: An SoC specific identifier followed by "qcom,qspi-v1", such as
- "qcom,sdm845-qspi", "qcom,qspi-v1"
-- reg: Should contain the base register location and length.
-- interrupts: Interrupt number used by the controller.
-- clocks: Should contain the core and AHB clock.
-- clock-names: Should be "core" for core clock and "iface" for AHB clock.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
- qspi: spi@88df000 {
- compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
- reg = <0x88df000 0x600>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
- <&gcc GCC_QSPI_CORE_CLK>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
- spi-tx-bus-width = <2>;
- spi-rx-bus-width = <2>;
- };
- };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
new file mode 100644
index 0000000..977070a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+ - Mukesh Savaliya <msavaliy@codeaurora.org>
+ - Akash Asthana <akashast@codeaurora.org>
+
+description: |
+ The QSPI controller allows SPI protocol communication in single, dual, or quad
+ wire transmission modes for read/write access to slaves such as NOR flash.
+
+allOf:
+ - $ref: /spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sdm845-qspi
+ - const: qcom,qspi-v1
+
+ reg:
+ description: Base register location and length.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: iface
+ - const: core
+
+ clocks:
+ items:
+ - description: AHB clock
+ - description: QSPI core clock.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ qspi: spi@88df000 {
+ compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+ reg = <0 0x88df000 0 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <&gcc GCC_QSPI_CORE_CLK>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+ };
+ };
+
+...
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] dt-bindings: spi: Add interconnect binding for QSPI
2020-02-17 9:49 [PATCH 0/2] Convert QSPI binding to YAML and add interconnect doc Akash Asthana
2020-02-17 9:49 ` [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML Akash Asthana
@ 2020-02-17 9:49 ` Akash Asthana
2020-02-20 2:30 ` Stephen Boyd
1 sibling, 1 reply; 6+ messages in thread
From: Akash Asthana @ 2020-02-17 9:49 UTC (permalink / raw)
To: robh+dt, agross, mark.rutland
Cc: linux-arm-msm, devicetree, linux-kernel, mgautam, rojay, skakit,
swboyd, Akash Asthana
Add documentation for the interconnect and interconnect-names
properties for QSPI.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 977070a..b58bd73 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -47,6 +47,14 @@ properties:
"#size-cells":
const: 0
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: qspi-config
+ - const: qspi-memory
+
required:
- compatible
- reg
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML
2020-02-17 9:49 ` [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML Akash Asthana
@ 2020-02-20 2:29 ` Stephen Boyd
2020-03-13 10:51 ` Akash Asthana
0 siblings, 1 reply; 6+ messages in thread
From: Stephen Boyd @ 2020-02-20 2:29 UTC (permalink / raw)
To: Akash Asthana, agross, mark.rutland, robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, mgautam, rojay, skakit,
Akash Asthana
Quoting Akash Asthana (2020-02-17 01:49:33)
> diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
> new file mode 100644
> index 0000000..977070a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
> @@ -0,0 +1,89 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Quad Serial Peripheral Interface (QSPI)
> +
> +maintainers:
> + - Mukesh Savaliya <msavaliy@codeaurora.org>
> + - Akash Asthana <akashast@codeaurora.org>
> +
> +description: |
Drop the | because it doesn't look like any formatting needs to be
maintained in the text for the description.
> + The QSPI controller allows SPI protocol communication in single, dual, or quad
> + wire transmission modes for read/write access to slaves such as NOR flash.
> +
> +allOf:
> + - $ref: /spi/spi-controller.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,sdm845-qspi
> + - const: qcom,qspi-v1
> +
> + reg:
> + description: Base register location and length.
Drop description? It doesn't seem useful.
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: iface
> + - const: core
> +
> + clocks:
> + items:
> + - description: AHB clock
> + - description: QSPI core clock.
Please drop the full-stop on core clock.
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
Aren't these two unnecessary because they're covered by the
spi-controller.yaml binding?
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clock-names
> + - clocks
> + - "#address-cells"
> + - "#size-cells"
These last two are also covered by spi-controller binding.
> +
> +
Why two newlines instead of one?
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + soc: soc@0 {
Remove this node from example please.
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + qspi: spi@88df000 {
> + compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
> + reg = <0 0x88df000 0 0x600>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "iface", "core";
> + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> + <&gcc GCC_QSPI_CORE_CLK>;
Weird tabbing here. Just use spaces and align it up.
> +
> + flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <25000000>;
> + spi-tx-bus-width = <2>;
> + spi-rx-bus-width = <2>;
> + };
Is this flash node necessary for the example?
> + };
> + };
> +
Nitpick: Why newline here?
> +...
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] dt-bindings: spi: Add interconnect binding for QSPI
2020-02-17 9:49 ` [PATCH 2/2] dt-bindings: spi: Add interconnect binding for QSPI Akash Asthana
@ 2020-02-20 2:30 ` Stephen Boyd
0 siblings, 0 replies; 6+ messages in thread
From: Stephen Boyd @ 2020-02-20 2:30 UTC (permalink / raw)
To: Akash Asthana, agross, mark.rutland, robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, mgautam, rojay, skakit,
Akash Asthana
Quoting Akash Asthana (2020-02-17 01:49:34)
> Add documentation for the interconnect and interconnect-names
> properties for QSPI.
>
> Signed-off-by: Akash Asthana <akashast@codeaurora.org>
> ---
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML
2020-02-20 2:29 ` Stephen Boyd
@ 2020-03-13 10:51 ` Akash Asthana
0 siblings, 0 replies; 6+ messages in thread
From: Akash Asthana @ 2020-03-13 10:51 UTC (permalink / raw)
To: Stephen Boyd, agross, mark.rutland, robh+dt
Cc: linux-arm-msm, devicetree, linux-kernel, mgautam, rojay, skakit
Hi Stephen,
On 2/20/2020 7:59 AM, Stephen Boyd wrote:
> Quoting Akash Asthana (2020-02-17 01:49:33)
>> diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
>> new file mode 100644
>> index 0000000..977070a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
>> @@ -0,0 +1,89 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +
>> +%YAML 1.2
>> +---
>> +$id:"http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
>> +$schema:"http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Qualcomm Quad Serial Peripheral Interface (QSPI)
>> +
>> +maintainers:
>> + - Mukesh Savaliya<msavaliy@codeaurora.org>
>> + - Akash Asthana<akashast@codeaurora.org>
>> +
>> +description: |
> Drop the | because it doesn't look like any formatting needs to be
> maintained in the text for the description.
ok
>> + The QSPI controller allows SPI protocol communication in single, dual, or quad
>> + wire transmission modes for read/write access to slaves such as NOR flash.
>> +
>> +allOf:
>> + - $ref: /spi/spi-controller.yaml#
>> +
>> +properties:
>> + compatible:
>> + items:
>> + - const: qcom,sdm845-qspi
>> + - const: qcom,qspi-v1
>> +
>> + reg:
>> + description: Base register location and length.
> Drop description? It doesn't seem useful.
ok
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + clock-names:
>> + items:
>> + - const: iface
>> + - const: core
>> +
>> + clocks:
>> + items:
>> + - description: AHB clock
>> + - description: QSPI core clock.
> Please drop the full-stop on core clock.
ok
>> +
>> + "#address-cells":
>> + const: 1
>> +
>> + "#size-cells":
>> + const: 0
> Aren't these two unnecessary because they're covered by the
> spi-controller.yaml binding?
ok
>
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts
>> + - clock-names
>> + - clocks
>> + - "#address-cells"
>> + - "#size-cells"
> These last two are also covered by spi-controller binding.
ok will remove
>> +
>> +
> Why two newlines instead of one?
>
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> + soc: soc@0 {
> Remove this node from example please.
If I remove this node I am getting below compilation error.
Error:
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:46.1-2
syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:311: recipe for target
'Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dt.yaml'
failed
make[1]: ***
[Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dt.yaml]
Error 1
Makefile:1264: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
>
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + qspi: spi@88df000 {
>> + compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
>> + reg = <0 0x88df000 0 0x600>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "iface", "core";
>> + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
>> + <&gcc GCC_QSPI_CORE_CLK>;
> Weird tabbing here. Just use spaces and align it up.
Ok, I will align it better.
>
>> +
>> + flash@0 {
>> + compatible = "jedec,spi-nor";
>> + reg = <0>;
>> + spi-max-frequency = <25000000>;
>> + spi-tx-bus-width = <2>;
>> + spi-rx-bus-width = <2>;
>> + };
> Is this flash node necessary for the example?
It's not neccessary.
I just preserved the original example from .txt binding file.
>
>> + };
>> + };
>> +
> Nitpick: Why newline here?
Will remove it.
Thankyou for reviewing the patch.
Regards,
Akash
>
>> +...
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-03-13 10:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-17 9:49 [PATCH 0/2] Convert QSPI binding to YAML and add interconnect doc Akash Asthana
2020-02-17 9:49 ` [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML Akash Asthana
2020-02-20 2:29 ` Stephen Boyd
2020-03-13 10:51 ` Akash Asthana
2020-02-17 9:49 ` [PATCH 2/2] dt-bindings: spi: Add interconnect binding for QSPI Akash Asthana
2020-02-20 2:30 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).