From: Anson Huang <Anson.Huang@nxp.com>
To: rui.zhang@intel.com, daniel.lezcano@linaro.org,
amit.kucheria@verdurent.com, robh+dt@kernel.org,
mark.rutland@arm.com, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, catalin.marinas@arm.com, will@kernel.org,
leonard.crestez@nxp.com, daniel.baluta@nxp.com,
shengjiu.wang@nxp.com, peng.fan@nxp.com, ping.bai@nxp.com,
jun.li@nxp.com, bjorn.andersson@linaro.org, olof@lixom.net,
vkoul@kernel.org, dinguyen@kernel.org,
marcin.juszkiewicz@linaro.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH RESEND 4/4] arm64: dts: imx8mm: Add thermal zone support
Date: Thu, 20 Feb 2020 16:17:26 +0800 [thread overview]
Message-ID: <1582186646-22096-4-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1582186646-22096-1-git-send-email-Anson.Huang@nxp.com>
Add thermal zone and tmu node to support i.MX8MM thermal
driver, ONLY cpu thermal zone is supported, and cpu cooling
is also added.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 43 +++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index b3d0b29..e438095 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -68,6 +68,7 @@
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_1: cpu@1 {
@@ -80,6 +81,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_2: cpu@2 {
@@ -92,6 +94,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_3: cpu@3 {
@@ -104,6 +107,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_L2: l2-cache0 {
@@ -204,6 +208,38 @@
arm,no-tick-in-suspend;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu>;
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
@@ -363,6 +399,13 @@
gpio-ranges = <&iomuxc 0 119 30>;
};
+ tmu: tmu@30260000 {
+ compatible = "fsl,imx8mm-tmu";
+ reg = <0x30260000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+ #thermal-sensor-cells = <0>;
+ };
+
wdog1: watchdog@30280000 {
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
--
2.7.4
next prev parent reply other threads:[~2020-02-20 8:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 8:17 [PATCH RESEND 1/4] dt-bindings: thermal: imx8mm-thermal: Add binding doc for i.MX8MM Anson Huang
2020-02-20 8:17 ` [PATCH RESEND 2/4] thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit Anson Huang
2020-02-27 11:07 ` Daniel Lezcano
2020-02-28 1:12 ` Anson Huang
2020-02-28 9:31 ` Daniel Lezcano
2020-02-29 3:37 ` Anson Huang
2020-02-20 8:17 ` [PATCH RESEND 3/4] arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module Anson Huang
2020-02-20 8:17 ` Anson Huang [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-10-28 6:03 [PATCH RESEND 1/4] dt-bindings: thermal: imx8mm-thermal: Add binding doc for i.MX8MM Anson Huang
2019-10-28 6:03 ` [PATCH RESEND 4/4] arm64: dts: imx8mm: Add thermal zone support Anson Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582186646-22096-4-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=amit.kucheria@verdurent.com \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=daniel.baluta@nxp.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=festevam@gmail.com \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marcin.juszkiewicz@linaro.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=peng.fan@nxp.com \
--cc=ping.bai@nxp.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
--cc=vkoul@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).