LKML Archive on
 help / color / Atom feed
From: "Alex Xu (Hello71)" <>
To: Nathan Chancellor <>
Cc: Russell King <>,,,,
Subject: Re: [PATCH] kbuild: move -pipe to global KBUILD_CFLAGS
Date: Sat, 22 Feb 2020 09:24:14 -0500
Message-ID: <1582381271.1karmgahx0.none@localhost> (raw)
In-Reply-To: <20200222080140.GA40311@ubuntu-m2-xlarge-x86>

Excerpts from Nathan Chancellor's message of February 22, 2020 3:01 am:
> I used hyperfine [1] to run a quick benchmark with a freshly built
> GCC 9.2.0 for x86 and aarch64 and here are the results:
> In both cases it seems like performance regresses (by 1% but still) but
> maybe it is my machine, even though this benchmark was done on a
> different machine than the one from my commit back in 2018.
> I am not sure I would write off these results, since I did the benchmark
> 25 times on each one back to back, eliminating most of the variance that
> you described.
> [1]:
> Cheers,
> Nathan

What kernel version are you running? Do you have the 5.6 pipe reworks?

  reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <>
2020-02-22  0:38 ` Alex Xu (Hello71)
2020-02-22  2:07   ` Masahiro Yamada
2020-02-22  9:01     ` Russell King - ARM Linux admin
2020-02-22  2:16   ` Nathan Chancellor
2020-02-22  4:01     ` Alex Xu (Hello71)
2020-02-22  8:01       ` Nathan Chancellor
2020-02-22 14:24         ` Alex Xu (Hello71) [this message]
2020-02-22 18:12           ` Nathan Chancellor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1582381271.1karmgahx0.none@localhost \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone