linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: viresh.kumar@linaro.org, sboyd@kernel.org,
	bjorn.andersson@linaro.org, agross@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Rajendra Nayak <rnayak@codeaurora.org>,
	Stanimir Varbanov <stanimir.varbanov@linaro.org>,
	linux-media@vger.kernel.org
Subject: [PATCH 16/21] media: venus: core: Add support for opp tables/perf voting
Date: Wed,  8 Apr 2020 19:16:42 +0530	[thread overview]
Message-ID: <1586353607-32222-17-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1586353607-32222-1-git-send-email-rnayak@codeaurora.org>

Add support to add OPP tables and perf voting on the OPP powerdomain.
This is needed so venus votes on the corresponding performance state
for the OPP powerdomain along with setting the core clock rate.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Cc: linux-media@vger.kernel.org
---
 drivers/media/platform/qcom/venus/core.c       | 16 +++++++++++
 drivers/media/platform/qcom/venus/core.h       |  4 +++
 drivers/media/platform/qcom/venus/pm_helpers.c | 37 +++++++++++++++++++++++---
 3 files changed, 53 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 194b10b9..3853637 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <media/videobuf2-v4l2.h>
 #include <media/v4l2-mem2mem.h>
@@ -250,6 +251,11 @@ static int venus_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (core->opp_pmdomain) {
+		core->opp = dev_pm_opp_set_clkname(dev, "core");
+		dev_pm_opp_of_add_table(dev);
+	}
+
 	pm_runtime_enable(dev);
 
 	ret = pm_runtime_get_sync(dev);
@@ -301,6 +307,8 @@ static int venus_probe(struct platform_device *pdev)
 err_venus_shutdown:
 	venus_shutdown(core);
 err_runtime_disable:
+	if (core->opp_pmdomain)
+		dev_pm_opp_of_remove_table(dev);
 	pm_runtime_set_suspended(dev);
 	pm_runtime_disable(dev);
 	hfi_destroy(core);
@@ -326,6 +334,9 @@ static int venus_remove(struct platform_device *pdev)
 
 	venus_firmware_deinit(core);
 
+	if (core->opp_pmdomain)
+		dev_pm_opp_of_remove_table(dev);
+
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 
@@ -350,6 +361,9 @@ static __maybe_unused int venus_runtime_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (core->opp_pmdomain)
+		dev_pm_opp_set_rate(dev, 0);
+
 	if (pm_ops->core_power)
 		ret = pm_ops->core_power(dev, POWER_OFF);
 
@@ -511,6 +525,7 @@ static const struct venus_resources sdm845_res_v2 = {
 	.vcodec_clks_num = 2,
 	.vcodec_pmdomains = { "venus", "vcodec0", "vcodec1" },
 	.vcodec_pmdomains_num = 3,
+	.opp_pmdomain = (const char *[]) { "opp-pd", NULL },
 	.vcodec_num = 2,
 	.max_load = 3110400,	/* 4096x2160@90 */
 	.hfi_version = HFI_VERSION_4XX,
@@ -556,6 +571,7 @@ static const struct venus_resources sc7180_res = {
 	.vcodec_clks_num = 2,
 	.vcodec_pmdomains = { "venus", "vcodec0" },
 	.vcodec_pmdomains_num = 2,
+	.opp_pmdomain = (const char *[]) { "opp-pd", NULL },
 	.vcodec_num = 1,
 	.hfi_version = HFI_VERSION_4XX,
 	.vmem_id = VIDC_RESOURCE_NONE,
diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
index bd3ac6a..90d011d 100644
--- a/drivers/media/platform/qcom/venus/core.h
+++ b/drivers/media/platform/qcom/venus/core.h
@@ -62,6 +62,7 @@ struct venus_resources {
 	unsigned int vcodec_clks_num;
 	const char * const vcodec_pmdomains[VIDC_PMDOMAINS_NUM_MAX];
 	unsigned int vcodec_pmdomains_num;
+	const char **opp_pmdomain;
 	unsigned int vcodec_num;
 	enum hfi_version hfi_version;
 	u32 max_load;
@@ -144,8 +145,11 @@ struct venus_core {
 	struct clk *vcodec1_clks[VIDC_VCODEC_CLKS_NUM_MAX];
 	struct icc_path *video_path;
 	struct icc_path *cpucfg_path;
+	struct opp_table *opp;
 	struct device_link *pd_dl_venus;
 	struct device *pmdomains[VIDC_PMDOMAINS_NUM_MAX];
+	struct device_link *opp_dl_venus;
+	struct device *opp_pmdomain;
 	struct video_device *vdev_dec;
 	struct video_device *vdev_enc;
 	struct v4l2_device v4l2_dev;
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index abf9315..b35ea7a 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -9,6 +9,7 @@
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/types.h>
 #include <media/v4l2-mem2mem.h>
@@ -66,10 +67,9 @@ static void core_clks_disable(struct venus_core *core)
 
 static int core_clks_set_rate(struct venus_core *core, unsigned long freq)
 {
-	struct clk *clk = core->clks[0];
 	int ret;
 
-	ret = clk_set_rate(clk, freq);
+	ret = dev_pm_opp_set_rate(core->dev, freq);
 	if (ret)
 		return ret;
 
@@ -740,13 +740,15 @@ static int venc_power_v4(struct device *dev, int on)
 
 static int vcodec_domains_get(struct device *dev)
 {
+	struct opp_table *opp;
+	struct device **opp_virt_dev;
 	struct venus_core *core = dev_get_drvdata(dev);
 	const struct venus_resources *res = core->res;
 	struct device *pd;
 	unsigned int i;
 
 	if (!res->vcodec_pmdomains_num)
-		return -ENODEV;
+		goto skip_pmdomains;
 
 	for (i = 0; i < res->vcodec_pmdomains_num; i++) {
 		pd = dev_pm_domain_attach_by_name(dev,
@@ -763,6 +765,24 @@ static int vcodec_domains_get(struct device *dev)
 	if (!core->pd_dl_venus)
 		return -ENODEV;
 
+skip_pmdomains:
+	if (!res->opp_pmdomain)
+		return 0;
+
+	/* Attach the power domain for setting performance state */
+	opp = dev_pm_opp_attach_genpd(dev, res->opp_pmdomain, &opp_virt_dev);
+	if (IS_ERR(opp))
+		return PTR_ERR(opp);
+	else if (opp_virt_dev) {
+		core->opp_pmdomain = *opp_virt_dev;
+		core->opp_dl_venus = device_link_add(dev, core->opp_pmdomain,
+						     DL_FLAG_RPM_ACTIVE |
+						     DL_FLAG_PM_RUNTIME |
+						     DL_FLAG_STATELESS);
+		if (!core->opp_dl_venus)
+			return -ENODEV;
+	}
+
 	return 0;
 }
 
@@ -773,7 +793,7 @@ static void vcodec_domains_put(struct device *dev)
 	unsigned int i;
 
 	if (!res->vcodec_pmdomains_num)
-		return;
+		goto skip_pmdomains;
 
 	if (core->pd_dl_venus)
 		device_link_del(core->pd_dl_venus);
@@ -783,6 +803,15 @@ static void vcodec_domains_put(struct device *dev)
 			continue;
 		dev_pm_domain_detach(core->pmdomains[i], true);
 	}
+
+skip_pmdomains:
+	if (!res->opp_pmdomain)
+		return;
+
+	if (core->opp_dl_venus)
+		device_link_del(core->opp_dl_venus);
+
+	dev_pm_domain_detach(core->opp_pmdomain, true);
 }
 
 static int core_get_v4(struct device *dev)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2020-04-08 13:48 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-08 13:46 [PATCH 00/21] DVFS for IO devices on sdm845 and sc7180 Rajendra Nayak
2020-04-08 13:46 ` [PATCH 01/21] opp: Manage empty OPP tables with clk handle Rajendra Nayak
2020-04-09  7:57   ` Viresh Kumar
2020-04-13 10:34     ` Rajendra Nayak
2020-04-13 10:42       ` Viresh Kumar
2020-04-14  6:57   ` Viresh Kumar
2020-04-08 13:46 ` [PATCH 02/21] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state Rajendra Nayak
2020-04-09 17:45   ` Matthias Kaehlcke
2020-04-10  8:36     ` Jun Nie
2020-04-13 14:22       ` Rajendra Nayak
2020-04-14  5:26         ` Jun Nie
2020-04-13 13:58     ` Rajendra Nayak
2020-04-10  6:56   ` Akash Asthana
2020-04-10 12:52     ` Akash Asthana
2020-04-13 14:13     ` Rajendra Nayak
2020-04-08 13:46 ` [PATCH 03/21] spi: spi-geni-qcom: " Rajendra Nayak
2020-04-09 18:20   ` Matthias Kaehlcke
2020-04-13 14:02     ` Rajendra Nayak
2020-04-08 13:46 ` [PATCH 04/21] arm64: dts: sdm845: Add OPP table for all qup devices Rajendra Nayak
2020-04-08 13:46 ` [PATCH 05/21] arm64: dts: sc7180: " Rajendra Nayak
2020-04-08 13:46 ` [PATCH 06/21] scsi: ufs: Add support to manage multiple power domains in ufshcd-pltfrm Rajendra Nayak
2020-04-08 13:46 ` [PATCH 07/21] scsi: ufs: Add support for specifying OPP tables in DT Rajendra Nayak
2020-04-08 13:46 ` [PATCH 08/21] arm64: dts: sdm845: Add ufs opps and power-domains Rajendra Nayak
2020-04-08 13:46 ` [PATCH 09/21] drm/msm/dpu: Use OPP API to set clk/perf state Rajendra Nayak
2020-04-08 13:46 ` [PATCH 10/21] drm/msm: dsi: " Rajendra Nayak
2020-04-08 13:46 ` [PATCH 11/21] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains Rajendra Nayak
2020-04-08 13:46 ` [PATCH 12/21] arm64: dts: sc7180: " Rajendra Nayak
2020-04-08 13:46 ` [PATCH 13/21] mmc: sdhci-msm: Use OPP API to set clk/perf state Rajendra Nayak
2020-04-15 13:52   ` Ulf Hansson
2020-04-15 16:43     ` Rajendra Nayak
2020-04-16  3:39       ` Viresh Kumar
2020-04-16  8:21         ` Ulf Hansson
2020-04-16  8:23       ` Ulf Hansson
2020-04-08 13:46 ` [PATCH 14/21] arm64: dts: sdm845: Add sdhc opps and power-domains Rajendra Nayak
2020-04-08 13:46 ` [PATCH 15/21] arm64: dts: sc7180: " Rajendra Nayak
2020-04-08 13:46 ` Rajendra Nayak [this message]
2020-04-08 13:46 ` [PATCH 17/21] arm64: dts: sdm845: Add OPP tables and power-domains for venus Rajendra Nayak
2020-04-08 13:46 ` [PATCH 18/21] arm64: dts: sc7180: " Rajendra Nayak
2020-04-08 13:46 ` [PATCH 19/21] spi: spi-qcom-qspi: Use OPP API to set clk/perf state Rajendra Nayak
2020-04-08 13:46 ` [PATCH 20/21] arm64: dts: sdm845: Add qspi opps and power-domains Rajendra Nayak
2020-04-08 13:46 ` [PATCH 21/21] arm64: dts: sc7180: " Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1586353607-32222-17-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=sboyd@kernel.org \
    --cc=stanimir.varbanov@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).